good night, I have motorola defy mb525, I flash using rsd or scout, the process completed successfully, but the device only connects a white LED, and not boots,
detail this device already tried to downgrade, I'm using the flash and this
JORLA_U3_3.4.2_107-9_SIGNED_USAJORDMR1B15RETBRLA019.0R_JORLAFRORETBRLA_P008_A008_M001_HWp3_Service1FF.sbf
already passed this too, but without success
JORLA_U3_3.4.2_107-9_SIGNED_USAJORDMR1B15TIMBRLA019.0R_JORLAFROTIMBRLA_P013_A009_M001_HWp3_Service1FF.sbf
because the client said that the unit used the operator tim br
Can someone help me
grateful
Claudemir
Related
Hi
SuperNoob here
i had a factory unlocked defy with 2.1
i managed to root it, but one fine evening it kept getting stuck on motorola icon
i did the factory reset/wipeout from the motorola recovery screen
after reboot the phone started, google account signs in then signs out itself, and motoblur cannot complete account setup, the red registration bar gets stuck in the end, i guess i cant create motoblur account from UAE (etisalat carrier)
how can i get my sweet moto back to normal? is there a way to flash 2.1 or even 2.2 from motorola recovery screen? how can i fix things?
PLEASE HELP ME OUT
ps. donno if this will help but this is device info i had earlier saved from rds lite
Technology: UMTS
Software Version: JRDNEM_U3_2.54.0EPU93ST2_U_03.0A.01
Flex Version: UCAJRDNEMARAB1B80AA030.0R
Bootloader Version: 0910
DRM Version: N/A
been trying to search and read more and more
i now know how to boot into bootloader which is 09.10 for my defy but while there and connecting the usb cable, drivers are loaded, and rsd lite does recognize the device. However it is not highlighting START when i point it to the stock 2.2 UAE rom i downloaded from http://forum.xda-developers.com/showthread.php?t=1122210
i donno what to do
help me polease
HOW TO BLOODY activate defy with or without motoblur account from Dubai?
since i posted i dint stop searching and reading
fount the correct stock froyo 2.2.2 and flashed with rds
the solution was so simple in the end, learnt a great deal today
PROBLEM SOLVED
Hey,
i have a defy with red lense(i don´t know if this was important). i came from froyo kernel and flashed a Defy+ O2 Blur 2.3.6 SBF, now i can´t flash all sorts! ;(
every time i tried to flash something came the massage "installing abort" ....
(make me crazy) after that i flash a froyo full sbf "3.4.2_177-005_NORDIC" but now my defy doesn´t boot, it stocks in a blackscreen. i can´t go into the bootloader or CWM ... it should stock in a blackscreen with the white phone led on(i have plugged the usb-cable to my pc, to get a request from the phone or something else).
i hope someone can help me
.... i have find out a solution ! i pull out the battery and before i push it back, i hold the volum+ button(normal way to get into the bootloader). i´ve waiting a few seconds and yeah! i got connection to RSD Lite and can flash a new SFB
I own a Sony Xperia Arc (purchased on June, 2011) and it doesn't work anymore without any explanation.
When I turn on the phone, it appears Sony Ericcson brand and then, mobile network carrier brand, but then, instead of appearing home, it appears again Sony brand and an infinite loop goes on.
At first,I tried to solve the problem with the Sony tools like PC Companion and Sony Update Service.
Then, I tried to do a hard reset (back + menu and power), but nothing changed (the same bootloop).
What would you do now? Would be useful trying to flash some firmware? I have been reading posts about flashing firmware, bootloader unlocking and rooting Xperia Arc, but I don't now really what would be the best move now.
For your information, I haven't applied any kind of official upgrade before, neither I have tried to root the phone or flash any custom firmware, so I had my phone as it came from factory (with Android 2.3.2). Moreover, I haven't installed any suspicious application, just typical apps like whatsapp and so on. By the way, the phone haven't suffered any crash neither wet.
I have attached the log I have taken when I try to turn on the phone (I get the same log again and again, at the end of the log it reports some problem with memory, I hope it's not a hardware problem):
Try using the Flashtool and report back. http://forum.xda-developers.com/showthread.php?t=1304634
XperienceD said:
Try using the Flashtool and report back. http://forum.xda-developers.com/showthread.php?t=1304634
Click to expand...
Click to collapse
Hi,
also have the same problem.
I have the same problem.
İ have lt15i firmware. Try to install lt18i via flashtool and something broken and aborted. I tried to install LT15i_4.0.2.A.0.42_(1247-1041).ftf via flashtool. It said flashed but said power on turn on unknown sources and devices. When i try to power on it boot loop in Sony Logo.
I try to use CWM mode. Wipe and flash some data. Couldn't find user data files. Installed a Custom ROM when a boot animation appear its boot again to SONY logo. what should i do?
Any ideas?
In the end, I could fix the problem flashing the latest firmware with Sony Update.
Anyways, thank you very much for the advice
Xperia arc problem
Hello, i have a problem since i tried to update my xperia arc to the last kit kat build, i flashed the kernel before installing the new rom, and now it simply reboot after legacyxperia logo, and when i tried to go to recovery menu it enters but doesn't show any options, only show the hat with the refresh symbol. If you can please help me.
Thank you, have a great day
Hello,
I recently just got the unlocked LG G3, used to have an iphone so pretty new to the Android software itself. It froze while I was playing music so I did a hard reset and with that the firmware was updated to Lollipop. Calling, messaging, and music didn't work so I attempted to downgrade my LG G3 using Flashtool (Followed exact steps on here androidexplained/howtodowngradeLgG3, can't put URL because I'm a new user) and I used the Bell firmware (I'm sure the phone is originally from Bell because they had pre-installed apps). Everything went smoothly to the very end, however it got stuck on the screen where the LED light is flashing and the logo of LG continously shines (is this boot-loop?). I've tried using PC Suite to reset the software however it doesn't recognize my phone. Is there any suggestions you would recommend me?
Thank you for the help
federer13 said:
Hello,
I recently just got the unlocked LG G3, used to have an iphone so pretty new to the Android software itself. It froze while I was playing music so I did a hard reset and with that the firmware was updated to Lollipop. Calling, messaging, and music didn't work so I attempted to downgrade my LG G3 using Flashtool (Followed exact steps on here androidexplained/howtodowngradeLgG3, can't put URL because I'm a new user) and I used the Bell firmware (I'm sure the phone is originally from Bell because they had pre-installed apps). Everything went smoothly to the very end, however it got stuck on the screen where the LED light is flashing and the logo of LG continously shines (is this boot-loop?). I've tried using PC Suite to reset the software however it doesn't recognize my phone. Is there any suggestions you would recommend me?
Thank you for the help
Click to expand...
Click to collapse
Does it boot into download mode still?
this same thing has happened to me while trying to flash twrp i guess i didnt notice that there is a d852g as well as 852 (the one i used) now its stuck on logo and i cant flash a rom so what do i do now?
federer13 said:
Hello,
I recently just got the unlocked LG G3, used to have an iphone so pretty new to the Android software itself. It froze while I was playing music so I did a hard reset and with that the firmware was updated to Lollipop. Calling, messaging, and music didn't work so I attempted to downgrade my LG G3 using Flashtool (Followed exact steps on here androidexplained/howtodowngradeLgG3, can't put URL because I'm a new user) and I used the Bell firmware (I'm sure the phone is originally from Bell because they had pre-installed apps). Everything went smoothly to the very end, however it got stuck on the screen where the LED light is flashing and the logo of LG continously shines (is this boot-loop?). I've tried using PC Suite to reset the software however it doesn't recognize my phone. Is there any suggestions you would recommend me?
Thank you for the help
Click to expand...
Click to collapse
Try to re-flash it again with the LG Flashtool and be sure to follow all steps correctly. It should work. Don't disconnect the phone until the process is finished. If the process freezes at 85% it's ok, it means the phone is rebooting and wait until you see a blue screen with a "3" on it. Then disconnect the phone and take out the phone's battery and put it in again. It should boot correctly. The first time to boot is always a bit longer. Just be patience.
Hello friends, i have a problem with an old Sony LT18i from a cousin, he brought it to me because he has the China Mobile variant with no GApps and android version was 2.3.4, i thought it might be solved with a simple flash via FLashtool, but when i've completed the downloading of the ftf file and went to flashtool to flash it, when the flashtool ask me to put it in flashmode pressing the back button and connecting to usb the phone led only blinks of 0.5 sec and then boots into normal mode.
Tried the same with fastboot and then i got the same blink for 0.5s with no detection at all. That surprised me as well i've have flashed succesfully other Xperia devices with no problems of led blinks at all. Now my problem is that later i tried to root the phone and installing CWM to flash another ROM or GApps package, and when i finished to install the recovery now the phone is bootlooping and never gets to boot normally.
I've tried with 4SE dongle to flash it via Testpoint and it doesn't work as the phone manufacture model is 12W13 (new security) which the dongle doesn't support, tried with S1 Tool with version 28II215 and 080714 and i only get PHONE NOT SUPPORTED IN THIS MODE when i try to flash and when trying to unlock the bootloader it gives me NOT SUPPORTED MCU REVISION.
The phone was working well until the CWM installation except for the flashmode and fastboot mode, now i really need to flash it and i can't find a way to do it, i also have RIFF JTAG and Z3X Easy JTAG box but no JTAG available for this model except for Medusa Box which only supports phones with manufacture date less than 12W10, i was wondering if there´s a way to access via QHUSB_DLOAD mode doing the testpoint to manually flash partitions to device or something like that. If you might have a workaround or a solution to at least let the phone in the way it was it will help me a lot. Thanks in advance, sorry if my english isn't so great.
Short blink usually means bad USB cable (at least it did for me). Simply try using another cable.