can anyone help me? im stuck in kernel v16 doomlord chaos#2016 ( i think this is a tes version of the kernel ) and cant replace to new versions of kernel. i tried to flash v19 by doomlord using fastboot with no problem but when checking it in settings>about phone>it says the older one. by the way i unlock bootloader with arconium 7.2,..62 firmware. can anyone help me???? i tried flashing kernel many times..please???
josephtabaco said:
can anyone help me? im stuck in kernel v16 doomlord chaos#2016 ( i think this is a tes version of the kernel ) and cant replace to new versions of kernel. i tried to flash v19 by doomlord using fastboot with no problem but when checking it in settings>about phone>it says the older one. by the way i unlock bootloader with arconium 7.2,..62 firmware. can anyone help me???? i tried flashing kernel many times..please???
Click to expand...
Click to collapse
Why don't you go ask doomlord or make question in doom's thread to get answer quickly ? If I were you, I'll backup via CWM mod and reflash fw .62 then flash doom kernel v19. Finally, wipe full and restore. Your current data will be saved for sure.
Sent from my LT18i using XDA
it is the same like me
install cwm, then choose the apply update from sdcard, then locate the file from your card.
Simple as that.
Kernel are flashed in fastboot, not in recovery
Sent from my iPad 2 using Tapatalk
Flo95 said:
Kernel are flashed in fastboot, not in recovery
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
I though you could update your kernel using cwm aswell :/
Anyway, here's the topic with the guide and the link with fastboot that worked for me when i flashed mine
http://forum.xda-developers.com/showthread.php?t=1508585
Related
Hi guys, just a quick question. I searched everywer but there is so much infomation and im abit lost.
Here is what i did so far, rooted with easy root and unlocked my bootloader.
Now i want to flash the kernel with flash tools to the latest V18 one from Doom . The thing is do i just flash it with flash tools via the hot boot option?
O and after that how to i put the wifi module on? sorry for being such a noob but im just gettign the hang of it now.Iv already downloaded the kernel and wifi module from Doom's post.I have V118 and V17 can you also advice me what one to use now and how do i put my stock kernel back if i want to at a later stage with flash tools.
CAn any1 help me with this simple question? maybe a easy way or typ me something plz?
Thanks in advance guys?
mo786wp said:
Now i want to flash the kernel with flash tools to the latest V18 one from Doom
Click to expand...
Click to collapse
Use fastboot.
mo786wp said:
O and after that how to i put the wifi module on?
Click to expand...
Click to collapse
CWM.
If you want tutorials, guides, search, there are tons.
Im goign to give it another go, to much info when i seach confuses me
Here is everything you need:
http://forum.xda-developers.com/showthread.php?p=14566692
Sent from my iPad 2 using Tapatalk
Ok i fugured out how to flash a Doom kernel but still cant figure out how to set the baseband and how to flash the Wifi module for it i read the link and searched still abit confused.Sorry guys im liek super new to this...
mo786wp said:
Ok i fugured out how to flash a Doom kernel but still cant figure out how to set the baseband and how to flash the Wifi module for it i read the link and searched still abit confused.Sorry guys im liek super new to this...
Click to expand...
Click to collapse
Here is the thread about basebands:
http://forum.xda-developers.com/showthread.php?p=20113685
Just download the ftf file of the baseband you want ( i prefer 36 baseband because of the good battery life) and flash it with flashtool. then you have to flash the equal baseband lib via cwm.
You don't need to flash wifi modules if you are on doomkernel because it's already integrated
Sent from my iPad 2 using Tapatalk
Awsome so even Doom kernel V18 has the Wifi intergrated?
nope
download and put in on you're sd cart,then flash in cwm the zip.
http://forum.xda-developers.com/attachment.php?attachmentid=894865&stc=1&d=1328821246
jejeh said:
nope
download and put in on you're sd cart,then flash in cwm the zip.
http://forum.xda-developers.com/attachment.php?attachmentid=894865&stc=1&d=1328821246
Click to expand...
Click to collapse
Of course! Since v16 it is integrated. Your link is for the modules of v15.
You just need to flash doomkernel v18
Sent from my iPad 2 using Tapatalk
wayne850 said:
Of course! Since v16 it is integrated. Your link is for the modules of v15.
You just need to flash doomkernel v18
Click to expand...
Click to collapse
No way;
since i have changed the kernel version string stock wifi modules will no longer work on my kernel...
if u try to enable them on new kernel (v14 onwards) u will get "ERROR" while starting WIFI...
i will be providing modules for my kernel which HAVE TO BE FLASHED VIA RECOVERY for wifi/bt (and other things) to work correctly
stock modules will also be provided which again will have to be flashed via recovery if u want to return to stock kernel OR if u revert to older v13 or lower kernels
remember i have already told this to u guys... if i see some users reporting that wifi is giving error because u did not follow my instructions ur post WILL BE IGNORED....
jejeh said:
nope
download and put in on you're sd cart,then flash in cwm the zip.
http://forum.xda-developers.com/attachment.php?attachmentid=894865&stc=1&d=1328821246
Click to expand...
Click to collapse
Thanks so much guys,the linked worked and my wifi worked 100% now after using cwn to install it=)
One last question , i have teh kernel, i have the module and basband files but how do i install LT15_LT18_36_Baseband.ftf via flash tool? i have the ftf and lib files but when i try to flash the ftf file with flash tool it says i must conect in flash mode and when i try that whiel following the instructions it just either boots to safe mode or cwm mode.
What am i doing wrong guys?
Make sure you're device is in flashmode.
Power off ,hold on backbutton and plugin you're device,check if the led is green.
Flash the ftf.
If you see any error on the screen ,read it and check it on you,re device ...usb/unknownsources etc enable
I tried the menu button and the back button, it just goes into CWM screen, with blue led. Cant seen to get green led to show. i have .42 build.
You can't see anything ,because you're device is turned off,only thing you can see is flashtools window.
Ok:
1 put the ftf file in the firmware folder in flashtools.
2 power off you''re device..hold on backbutton and plugin.
3 return to flashtools and hit the flashbutton/select flashmode.
4 Now you see the ftf and flash it.
O Snap, iv been turning the phone back on all the time thats why!
Thanks alot man, got it finaly.
Thanks guys for answering all my silly questions.My Arc and I are happy now
Ok ..I'm happy to read it's working now.
Happy flashing :-]
Howzit guys, another quick question with regards to Kernel and the full touch recovery.I flashed the V19 Doom kernel on my phone abut cant seen to figure out how to acces the full touch recovery thou?
I tried using the back button, the menu buttom and even volup and down button but keep getting to the CWM-Based recovery v5.0.2.7-nAa-r2, funny thing is that yesterday i got to the full touch revoery menu but today im getting to this menu even if i keep tapping the button after i try tapping the button after i see the blue light.
Any idea? what am i doing wrong now again
i just flash my phone with custom rom...after reboot only left sony logo then black screen..my phone is bootloader unlocked...try flash tool it need turn on usb debg but my phone cant turn on..any solution...pls help...
Sent from my GT-I9000 using xda premium
shin9999 said:
i just flash my phone with custom rom...after reboot only left sony logo then black screen..my phone is bootloader unlocked...try flash tool it need turn on usb debg but my phone cant turn on..any solution...pls help...
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Did you flash the required kernel for the ROM..? If not flash the recommended kernel and ejoy..
Hit Thanks if I helped
which kernal should i flash can send me the link thank alot
post which ROM you wanted to flash
shin9999 said:
which kernal should i flash can send me the link thank alot
Click to expand...
Click to collapse
It's usually written on page where the ROM is posted, just check back to that ROM page and search kernel used. Remember, if it's entirely new, flash kernel first then flash ROM. If the ROM use the same kernel you've flash before, just flash ROM only
Hope it helps
Andriod MooDeD ICS 80.11 IFT [ROM]
thank~~
shin9999 said:
Andriod MooDeD ICS 80.11 IFT [ROM]
thank~~
Click to expand...
Click to collapse
That one goes with stock kernel, doomkernel snd arcknight.
Did you flash it over a gingerbread rom ? If so first flash a stock ics with flashtool and then go for the MooDeD.
garisan said:
That one goes with stock kernel, doomkernel snd arcknight.
Did you flash it over a gingerbread rom ? If so first flash a stock ics with flashtool and then go for the MooDeD.
Click to expand...
Click to collapse
I have the same problem....no....it's even worse....I was having stock ICS installed ...then I flashed arcnight kernel...after that I put "carbon custom rom" on my sd-card then flash it using recovery mode....then the mobile is stock at logo...and when i try to flash it using flashtool it says ( processing loader.sin finished with error )
PLEASE HELP
yazanee said:
I have the same problem....no....it's even worse....I was having stock ICS installed ...then I flashed arcnight kernel...after that I put "carbon custom rom" on my sd-card then flash it using recovery mode....then the mobile is stock at logo...and when i try to flash it using flashtool it says ( processing loader.sin finished with error )
PLEASE HELP
Click to expand...
Click to collapse
Flash stock ROM only via flashtool ver. 18.5 or 18.6
Hey guys, my phone is currently at 4.0.2.A.0.62 and it is boot loader unlocked. But I have complete no idea how to root my phone. And after I root, I would like to have my phone's UI look like the Ice Cream Sandwich look, but not the actual firmware, because I heard that Xperia Arc cannot handle ICS from the official sony ericsson website. So if anyone of you guys can help. It would be very helpful. Cheers
You can't use tools to root .62 firmware coz sony did something not being able to root it.. As you mentioned that your bootloader is unlocked why don't you flash a custom kernel like Doomkernel and a smooth rom like Arconium and it'll do wonders for you.. Then you can install themes to get the ICS look.... Because, i have done all of these and presently using this setup!
Sent from my LT15i using XDA
Reply
Hey yeah thanks mate. But where can I get the kernel from, can you post the link? And I've got the flash tool software, so do I just flash the kernel from there? Cheers
cwk8412 said:
Hey yeah thanks mate. But where can I get the kernel from, can you post the link? And I've got the flash tool software, so do I just flash the kernel from there? Cheers
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1172885
Above s the kernel link, download both the kernel and the libraries.. Yes you can flash kernel using flashtool..Copy the .img file to pc, Get into fastboot mode by switching off the mobil, then press the menu button and connect to pc.. Flashtool will say that device connected in fastboot mode.. Now go to flash option and select fastboot mode, from the toolbox select kernel to flash and point to the img file.. The kernel will be flashed.. Now go into recovery and flash the libraries you downloaded from the kernel thread or else wi fi wont work! Get it?
Sent from my LT15i using XDA
I am trying to install a custom ROM, first thing is to flash .587 ftf. But after i flash it successfully using flash tool, the phone reboots and returns a lot of "Unfortunately the process. blah blah blah has stopped" the phone becomes unstable and i get a boot loop.. I have done this before (flashing .587 ftf) i will work like butter. But i dont know what is wrong now. When i was using Omega ROM, it suddenly got strucked and reboot several , times. Now i flashed a GB ftf. Can anyone help me, how can i make the .587 ftf work..? what is the reasom behind that? And even i tried to relock the boot loader and update using sony pc companion. It ended up in a failed error message.
Please HELP
thanks in Advance..!
No, you do not need root to install kernel.
No, you do not need to flash stock ICS/GB if you are going to install full fresh custom ROM.
Someguyfromhell said:
No, you do not need root to install kernel.
No, you do not need to flash stock ICS/GB if you are going to install full fresh custom ROM.
Click to expand...
Click to collapse
My boot loader is Unlocked, I am now on stock GB. Flashing Vengeance kernel and installing UHD ROM in CWM results in Boot loop. Please help
Cibhin said:
My boot loader is Unlocked, I am now on stock GB. Flashing Vengeance kernel and installing UHD ROM in CWM results in Boot loop. Please help
Click to expand...
Click to collapse
try another kernel
Try wipe and factory reset your phone before flashing..
Sent from my GT-I9300 using xda app-developers app
Are you flashing the arc S or arc ftf. You need to flash the Arc S version as it gives u more internal memory needed by the rom.
Sent from my X10i using xda premium
tangosierra_ said:
Are you flashing the arc S or arc ftf. You need to flash the Arc S version as it gives u more internal memory needed by the rom.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
U can flash for your device' rom ICS/GB
Hello, hope someone can help. I've been trying for days to boot my phone into Clockworkmod Recovery so I can install [ROM][PLAY][2.3.7] Gin2JellyBean v2.5.1, I have unlock the bootloader on my Xperia play R800i, I also was able to root my phone, I have tried various method on installing CWM, I have used the x-part, rom manager and recover x, Once I reboot my device, I have tried the volume down button and the back key button. When loading the stay on the Sony Ericsson boot screen and I have to remove the battery from the device. I had the the 4.0.2.A,0.62, i thought it could have been the Build Number and I flash to the 4.0.2.A,0.79, the problem is the same.
Android version
2.3.4
Baseband Version
8x55A-AAABQMAZM-203028D-80
Kernal Version
2.6.32.9-perf
[email protected] #1
Build Number
4.0.2.A,0.79
NinjaPsycho said:
Hello, hope someone can help. I've been trying for days to boot my phone into Clockworkmod Recovery so I can install [ROM][PLAY][2.3.7] Gin2JellyBean v2.5.1, I have unlock the bootloader on my Xperia play R800i, I also was able to root my phone, I have tried various method on installing CWM, I have used the x-part, rom manager and recover x, Once I reboot my device, I have tried the volume down button and the back key button. When loading the stay on the Sony Ericsson boot screen and I have to remove the battery from the device. I had the the 4.0.2.A,0.62, i thought it could have been the Build Number and I flash to the 4.0.2.A,0.79, the problem is the same.
Android version
2.3.4
Baseband Version
8x55A-AAABQMAZM-203028D-80
Kernal Version
2.6.32.9-perf
[email protected] #1
Build Number
4.0.2.A,0.79
Click to expand...
Click to collapse
Since you unlocked your bootloader, you can flash any custom kernel (Doomkernel or newer Lupus kernel). They all have CWM or TWRP recovery.
Thank you for the reply.
Bakisha said:
Since you unlocked your bootloader, you can flash any custom kernel (Doomkernel or newer Lupus kernel). They all have CWM or TWRP recovery.
Click to expand...
Click to collapse
Is the Doomkernel & Lupus kernal like CWM, sorry for the dumb question. if so you can, can you point out a tutorial with step by step.
NinjaPsycho said:
Is the Doomkernel & Lupus kernal like CWM, sorry for the dumb question. if so you can, can you point out a tutorial with step by step.
Click to expand...
Click to collapse
You could check tutorals at http://forum.xda-developers.com/showthread.php?t=1836530
You could also check sticky threads in q/a and general section
Maybe cwm installer (or xparts) don't work on unlocked bootloader, and that's why you can't install it. Or, as i recall, only some versions work (v5 is working, as i recall)
Before all that, make backup of your apps with titanium backup, just in case.
Custom kernels have embedded cwm recovery (two things in a single file).
Sent from my R800i using xda app-developers app
Bakisha said:
You could check tutorals at http://forum.xda-developers.com/showthread.php?t=1836530
You could also check sticky threads in q/a and general section
Maybe cwm installer (or xparts) don't work on unlocked bootloader, and that's why you can't install it. Or, as i recall, only some versions work (v5 is working, as i recall)
Before all that, make backup of your apps with titanium backup, just in case.
Custom kernels have embedded cwm recovery (two things in a single file).
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Thank you, I appreciate the time you have taken to answer my concern.
The new xparts tool does not work for the play anymore you need to use v5 or bellow
Sent from my Droid using xda app-developers app