i remember having clockworkmod recovery 3 but when you install it, its temporary anybody know where this file is
"you gain knowledge by asking questions"
-by unknown
You can get it via RomManager.
Download the 3.x recovery inside RomManager, then click Reboot into Recovery (in RomManager)
There is one more way.
Of flashing a temp. recovery inside the real recovery.
I don't have a temporary 3.x recovery, but I do have a temporary 2.5.x recovery.
You can get all the available temporary ZIP recoveries here:
http://download.clockworkmod.com/recoveries/
Look for the files with 'Buzz' in the file name, and which ends with .zip
thanks 3xeno +1
Related
Hi all,
Today i was trying to flash the radio for my HTC wildfire
version: 13.55.55.2424H_3.35.20.10 (same as the one on my phone now)
What i have done:
1-renamed the radio to update.zip and put it on SD root
2- booted in recovery mode (CWM 4.0.1)
3- chosen install zip from sd card
but i got this message:
Installing update..
Amend scripting ( update.script) is no longer supported.
( some sentences including CWM 3 and ginger bread) don't remember them exactly
Installation aborted.
I rebooted phone and thanks to God it's working OK, communications OK.
What i have done wrong?
help will be appreciated
thanks in advance.
It needs Clockworkmod Recovery 2.x. So, you can get that from within ROM Manager App.
- Open ROM Manager
- Select Install Clockworkmod Recovery
- This will install v2.5.0.7 on your SDCard (It wont touch your v4.x)
- Then select Reboot into Recovery from within ROM Manager.
- This will start Clockworkmod 2.6.0.7, then flash the radio as normal.
Alternatively, get this attachment:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
Flash in in Clockworkmod 4.0.1, it will give you temporary 2.5.0.7, then proceed as normal.
Thanks a lot 3xeno
i have done the first on and it worked
but
when i installed the updat.zip
some lines was showed but it was very quick i couldn't read them
but the process took about 5 seconds or maybe less
is that normal??
how can i know that i have flashed the radio succefuly?
the phone is working OK.
Yes, its normal. When you follow the second procedure, it gives you temporary 2.5.0.7.
I hope you followed only one of the procedures though. (Either go via the ROM Manager App way, or go via the update1.zip way, not both)
When you flash a Radio, it says "The Radio will install on Reboot". Then, you select "Reboot System Now" in Clockworkmod, and it will reboot your phone, and it will state "Writing Radio Image". This process takes some time, after which your phone reboots again and starts normally. When this happens, you can be sure you have reflashed the radio properly.
i followed the first
i have reeboted into CWM 2.5 ( green color)
then i flash the update.zip by install zip from sd card
it shows quick lines
and i don't see this "The Radio will install on Reboot"
the back to recovery menu
i choose reboot system now
the phone reboot as normal without this "Writing Radio Image"
any thing am missing?
Don't flash the update.zip in Clockworkmod 2.5.0.7 (Green Text). The update.zip is an alternative to be flashed in Clockworkmod 3.x/4.x (Orange text) which will reboot your system in Clockworkmod 2.5.0.7. (ie - It is to be used only if you didn't use the ROM Manager method. Since you have installed Clockworkmod 2.5 using ROM Manager, you can delete the update.zip, you no longer need it)
Once you get to Clockworkmod 2.5.0.7, Flash the Radio's Zip using the same procedure. (Install Zip from SDCard > Select Radio Zip file). To reiterate, theres no need for update.zip once you are in Clockworkmod 2.5
Thanks a million 3xeno
flashed the radio Successfully
what i was doing wrong that i have renamed the radio zip file to update.zip
method that i have done for anybody hwo wants to do that (thanks to 3xeno):
1- put the radio file as it is on SD root (don't change the name of zip file)
2- go to rom manger and choose flash clockworkmod recovery
3- from rom manger choose reboot into recovery
(will reboot in CWM 2.5) green text
4- choose install zip from sd card
5- press go back (back button won't work) go to the bottom of menu and you will find the ++back++
6- choose reboot system now and wait til it finish.
I don't think changing of filename from radio.zip to update.zip will affect installation of radio (as long as you haven't extracted the zip).
But what happened is (I guess) ---
You are changing the radio.zip to update.zip and kept it at the root of sdcard. Then if you open Rom manager and flash recovery, the update.zip related to radio will be overwritten by cwm2.x update.zip . And vice versa if you have flashed Rom manager cwm2.x first and then copied radio update.zip to root of sdcard.
So basically one of the needed things are missing ( = being overwritten) which interfere with the process. Anyway nice that you made it.
Sent from my HTC Wildfire using XDA App
Can some one suggest me where download and how installa the stock rom for wildfire.
Now I use a cynogen 7 and i want go back to original froyo + sense
There are 3 primary ways to do that:
1) If you had taken a Nandroid Backup before installing CM7, Just restore that. (But I am assuming you didn't, hence you are asking this)
2) If you want to retain root and Clockworkmod Recovery, just flash this ROM. Its Stock Froyo + Sense:
http://forum.xda-developers.com/showthread.php?t=877977
The process to install that is as follows:
- Download this attachment and place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash in Clockworkmod 3.x or higher. This will give you temporary Clockworkmod 2.5 (Green Text)
- Then, perform a Data Wipe, and install the ROM Zip file as normal.
3) If you dont want to retain root and Clockworkmod
- Download the Froyo RUU from Shipped ROMs (Froyo WWE 2.22.405.1 EXE) from Shipped ROMs:
http://shipped-roms.com/index.php?category=android&model=Buzz
- Connect Wildfire to the PC, and simply run it.
Hi, I'm back
Just 2 questions
I downloaded both files
i copied both files on sd then i started rom manager and tapped on first field to
Flask clockwork mod recovery
Then? what i have to do to revert to Clockworkmod 2.5?
i downloaded this file from the link Safe_Buzz_Froyo_HTC_WWE_2.22.405.1_Rooted
is it true?
3xeno said:
2) If you want to retain root and Clockworkmod Recovery, just flash this ROM. Its Stock Froyo + Sense:
http://forum.xda-developers.com/showthread.php?t=877977
The process to install that is as follows:
- Download this attachment and place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash in Clockworkmod 3.x or higher. This will give you temporary Clockworkmod 2.5 (Green Text)
- Then, perform a Data Wipe, and install the ROM Zip file as normal.
Click to expand...
Click to collapse
I cant find the website ther's a mirror if i want go back to stock with no root rom
3xeno said:
3) If you dont want to retain root and Clockworkmod
- Download the Froyo RUU from Shipped ROMs (Froyo WWE 2.22.405.1 EXE) from Shipped ROMs:
http://shipped-roms.com/index.php?category=android&model=Buzz
- Connect Wildfire to the PC, and simply run it.
Click to expand...
Click to collapse
Ariakan said:
Hi, I'm back
Just 2 questions
I downloaded both files
i copied both files on sd then i started rom manager and tapped on first field to
Flask clockwork mod recovery
Then? what i have to do to revert to Clockworkmod 2.5?
i downloaded this file from the link Safe_Buzz_Froyo_HTC_WWE_2.22.405.1_Rooted
is it true?
I cant find the website ther's a mirror if i want go back to stock with no root rom
Click to expand...
Click to collapse
I can't understand what you mean by your first question at all. Clockworkmod Recovery flashed via ROM Manager is temporary. Your original Clockworkmod will remain untouched. So if you are using the option called Flash Clockworkmod Recovery in ROM Manager, then the next step is to select Reboot into Recovery from the ROM Manager App again, then flash the ROM File. In this case, you can discard the update1.zip file, as it has no significance.
As for your second question, mirrors of the EXE RUU can be found here:
http://forum.xda-developers.com/showthread.php?t=1275680
My first question is simple
on my phone i have rom manager and there is a row named "Flask clockwork mod recovery"
but
i don't know how go back from cynogen to stock rom using clockwork mod recovery
can you help me step by step?
and the stock [with no root] rom for wildfire with froyo is this one?
RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.2 4H_3.35.20.10_release_160191_signed.exe (This RUU contains HBoot 1.01.0001)
i need only to connect the phone to pc and run the exe?
First, decide what you want to do - Flash the EXE RUU, or Flash the Safe Flash ZIP File. If you decide to flash the Safe ZIP file, you will keep Clockworkmod Recovery, which will allow you to flash stuff later. If you select the EXE RUU, Clockworkmod Recovery will be removed, so you will NOT be able to flash anything, like ROMs, Kernels etc.
Once you have decided, here are the steps:
1) If you decide to install the Safe Flash ZIP File
- Download the Safe Flash ZIP from here:
http://forum.xda-developers.com/showthread.php?t=877977
Rooted / Unrooted, Its upto you which version you want. Rooted version has Superuser, so you can run apps like Titanium Backup etc. Unrooted doesnt have Superuser, so you cant run root apps.
- Place this file on your SDCard
- Now, open ROM Manager
- Select Flash Clockworkmod Recovery. Then make sure you select 2.5.0.7. NOT a version beginning with 3.x, 4.x or 5.x
- Once it is installed, in ROM Manager, the next option will be 'reboot into recovery'. Select that
- Once you select that, then you will be taken to Clockworkmod 2.5.0.7 (Which has all its options in Green coloured Text). Here, select "Wipe Data / Factory Reset". This step will erase all data on your phone (Not on your SDcard, Just your phone data. This step is essential when changing ROMs)
- Lastly, select "Install Zip from SDCard", and then, select the ZIP file you placed on your card at the beginning of this step. Let it install. Once installed, Select "Reboot System Now", and let the phone reboot. Done
2) If you decide to run the EXE RUU
- Its pretty much 1 step. Connect the phone to your PC and run the EXE File. It will automatically perform the install. If you get an Error 131 - Customer ID Error, you will need to create a Goldcard. There's a guide for that here:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7
Did u perform wipe data n clear cache before flashing?
Sent from my HTC Wildfire using XDA Premium App
same question
I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7
shemulweb said:
same question
I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7
Click to expand...
Click to collapse
Flash this zip file in CWM3: (Install Zip from SDCard > Choose Zip from SDCard. (Don't select the "Apply update.zip option)
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
It will give you temporary 2.5.0.7, then you can flash the ROM. (It is temporary, so, everytime you want CWM 2.5.0.7, you will have to flash this Zip file)
Hai there!
I have CWM version 3.2.0.0 in my Wildfire and I want to update to 5.0.2.7. I know we can open up 5.0.2.0 without flashing something in Rom Manager but I want my real CWM 5.0.2.7. So how we are doing it. Should I just do what I did when flasing 3.2.0.0?
Thanks.
Read this thread:
http://forum.xda-developers.com/showthread.php?t=1029318
How to Install a new Clockworkmod Recovery Image?
There are 4 basic ways:
1) Via Terminal Emulator (Needs S-OFF) - Guide Here. If you get an error "flash_image: Not Found", follow Steps 1-5 from Here, then, back to the original (first) link. Pushing of flash_image is a 1 time process. You need not repeat it everytime.
2) Via Fastboot (Needs AlphaRev / Revolutionary S-OFF) - Guide Here. Refer the part called "To install Clockworkmod after Revolutionary"
3) Via PC49IMG.zip Process (Needs S-OFF) - Download anyone of the PC49IMG ZIP file of the recovery you wish to install, place on your SDcard, and reboot into HBoot Mode. It will detect the file, and ask to install. Simply select Yes. If you wish to install another version which isn't present below, simply get the IMG file of the recovery version you wish to install,and replace in an existing ZIP. (Without Unzipping)
4) Via Unrevoked (No Pre-Requisites. Works on S-ON / S-OFF devices) - Guide Here
ZoRaN85 said:
Read this thread:
http://forum.xda-developers.com/showthread.php?t=1029318
How to Install a new Clockworkmod Recovery Image?
There are 4 basic ways:
1) Via Terminal Emulator (Needs S-OFF) - Guide Here. If you get an error "flash_image: Not Found", follow Steps 1-5 from Here, then, back to the original (first) link. Pushing of flash_image is a 1 time process. You need not repeat it everytime.
2) Via Fastboot (Needs AlphaRev / Revolutionary S-OFF) - Guide Here. Refer the part called "To install Clockworkmod after Revolutionary"
3) Via PC49IMG.zip Process (Needs S-OFF) - Download anyone of the PC49IMG ZIP file of the recovery you wish to install, place on your SDcard, and reboot into HBoot Mode. It will detect the file, and ask to install. Simply select Yes. If you wish to install another version which isn't present below, simply get the IMG file of the recovery version you wish to install,and replace in an existing ZIP. (Without Unzipping)
4) Via Unrevoked (No Pre-Requisites. Works on S-ON / S-OFF devices) - Guide Here
Click to expand...
Click to collapse
sir, the link is not working, some notice appearing about piracy and copyrights
19iceman32 said:
sir, the link is not working, some notice appearing about piracy and copyrights
Click to expand...
Click to collapse
Megaupload was shut down yesterday (presumably to get back at the internet for killing SOPA)
Sent from my HTC Wildfire using xda premium
I have CWM 3 installed...I want to overwrite it and remove CWM 3 with CWM 5...I update it via recovery and I get temporary CWM 5 ..but how can I completly install CWM 5 over 3..such that whenever I reboot my recovery I get CWM 5 installed totally..help soon pls..
Copy Paste from my Index Thread: (2nd Post, Point #6)
How to Install a new Clockworkmod Recovery Image?
There are 4 basic ways:
1) Via Terminal Emulator (Needs S-OFF) - Guide Here. If you get an error "flash_image: Not Found", follow Steps 1-5 from Here, then, back to the original (first) link. Pushing of flash_image is a 1 time process. You need not repeat it everytime.
2) Via Fastboot (Needs AlphaRev / Revolutionary S-OFF) - Guide Here. Refer the part called "To install Clockworkmod after Revolutionary"
3) Via PC49IMG.zip Process (Needs S-OFF) - Download anyone of the PC49IMG ZIP file of the recovery you wish to install, place on your SDcard, and reboot into HBoot Mode. It will detect the file, and ask to install. Simply select Yes. If you wish to install another version which isn't present below, simply get the IMG file of the recovery version you wish to install,and replace in an existing ZIP. (Without Unzipping)
4) Via Unrevoked (No Pre-Requisites. Works on S-ON / S-OFF devices) - Guide Here
Thnks...
Sent from my HTC Wildfire using XDA Premium App
PC49IMG didnt work for me. However, Terminal emulator did
thanks
Hi everybody,
I'm a newbie.
I tried to root my phone but just can not flash superu.
I flash TWRP ( 2.5.0.0) via ODIN sucessfully with a green Pass . Reboot phone to recovery and Hit System and TWRP asked me to swipe if i want to root my phone. I did and my phone reboot after some action performed by TWRP.
I checked with root check basic and it said Root access is not properly installed on this device. I tried to run TWRP manager apk. It said to run the apk phone need rooted. So I know the phone has not been rooted.
I did the following to see if I can correct the problem.
1)Reboot to TWRP recovery and flash CWM_Root_Superuser_3.1.3_Busybox zip file. No success.
2) flash another zip: su-3.0.5-efgh-signed. No sucess.
3) flash another zip: Update superU-1.51 : No success.
4) Flash ClockworkMod Touch Recovery 6.0.2.8 then try to run Install zip on SD card but CWTR return with an error "can not mount sd card "
Please help so I can root my phone. Thanks.
__________________________
Solution:
I found a SU file that work at this thread : http://forum.xda-developers.com/gal...ginner-trying-to-root-flash-rom-t989-t2832408