Develop Bugs

[Q] lost root after last update

If you have Unrevoked 3 installed:
1. Download stock Evo Recovery image (Can't find it anywhere... EVO Stock Recovery? - xda-developers)
2. Place the file in root of SD card and reboot into HBOOT (volume down/power button)
3. Do the update that HBOOT asks (vol. up for YES)
4. Reboot
5. Once rebooted, download OTA and install (should work now)
6. Once install finishes successfully you can reinstall a custom recovery using the same method (a list of them are here: public:forever [RootWiki])
7. Once you have a custom recovery back, you will need to reinstall Superuser as an update.zip through recovery ([APP] Superuser 2.3.6.1 - Now on the Market [2010-09-05] - xda-developers)
8. Reboot and enjoy!
Well I followed the instructions and the update went through... HOWEVER I have now lost root.... Help please.
EDIT: S-OFF does appear when I boot into the bootloader...

If you have S-Off, than you have not lost root.
YOu probably just lost your recovery, and you need to reflash it.

This tutorial from tws101 worked for me (I can't post a link as a new user):
"This guide will allow you to install the new OTA 3.29.651.5 when you have clockwork installed and will guide you into re-rooting the phone afterwards. (This does NOT wipe your data)
I am sorry if someone already posted this.
Requirements
1. Froyo 2.2 version 3.26.651.6 (Stock)
2. Clockwork
3. S-OFF
Files to Download (If you have a file manager on your phone you can just direct download them with the EVOs browser)
1. OTA_Supersonic_3.29.651.5 This is the new OTA update
2. ClockworkMod recovery for EVO 4G Clockwork (I know you already have it. This is to reinstall it)
3. su-2.3.6.1-ef-signed.zip Superuser (This is also to reinstall)
Step one
Place OTA_Supersonic_3.29.651.5 on your SD cards root folder. Power off and reboot holding Volume down. Once the bootloader is up goto recovery so clockwork loads up. Choose apply zip from sd card. Choose select zip on sd card. You will see the OTA file on the list flash it. Just wait for it to install it will reboot the phone show a progress bar reboot again they show a percentage etc it takes a few minutes.
Now you have the update installed, but the update removed clockwork and root.
Step two
Place ClockworkMod recovery for EVO 4G on your sd card root folder. Power off and reboot holding Volume down. The bootloader will scan the new will and ask you to press Volume up to install. Install it.
Now you have clockwork installed again. Please remove the clockwork file from the root of your SD card before going to step 3.
Step Three
Place su-2.3.6.1-ef-signed.zip on the SD cards root folder. Power off and reboot holding Volume down. Once the bootloader is up goto recovery so clockwork loads up. Choose apply zip from sd card. Choose select zip on sd card. You will see the SU file on the list flash it.
Now you are updated and rerooted. (I have been told it is possible to just rerun unrevoked instead of doing step 2 and 3. I did not test that method. I am simply showing a different method.)
Update
I am now getting 53 FPS with FPS 2D"
Thanks tws101

acron1 said:
This tutorial from tws101 worked for me (I can't post a link as a new user):
"This guide will allow you to install the new OTA 3.29.651.5 when you have clockwork installed and will guide you into re-rooting the phone afterwards. (This does NOT wipe your data)
I am sorry if someone already posted this.
Requirements
1. Froyo 2.2 version 3.26.651.6 (Stock)
2. Clockwork
3. S-OFF
Files to Download (If you have a file manager on your phone you can just direct download them with the EVOs browser)
1. OTA_Supersonic_3.29.651.5 This is the new OTA update
2. ClockworkMod recovery for EVO 4G Clockwork (I know you already have it. This is to reinstall it)
3. su-2.3.6.1-ef-signed.zip Superuser (This is also to reinstall)
Step one
Place OTA_Supersonic_3.29.651.5 on your SD cards root folder. Power off and reboot holding Volume down. Once the bootloader is up goto recovery so clockwork loads up. Choose apply zip from sd card. Choose select zip on sd card. You will see the OTA file on the list flash it. Just wait for it to install it will reboot the phone show a progress bar reboot again they show a percentage etc it takes a few minutes.
Now you have the update installed, but the update removed clockwork and root.
Step two
Place ClockworkMod recovery for EVO 4G on your sd card root folder. Power off and reboot holding Volume down. The bootloader will scan the new will and ask you to press Volume up to install. Install it.
Now you have clockwork installed again. Please remove the clockwork file from the root of your SD card before going to step 3.
Step Three
Place su-2.3.6.1-ef-signed.zip on the SD cards root folder. Power off and reboot holding Volume down. Once the bootloader is up goto recovery so clockwork loads up. Choose apply zip from sd card. Choose select zip on sd card. You will see the SU file on the list flash it.
Now you are updated and rerooted. (I have been told it is possible to just rerun unrevoked instead of doing step 2 and 3. I did not test that method. I am simply showing a different method.)
Update
I am now getting 53 FPS with FPS 2D"
Thanks tws101
Click to expand...
Click to collapse
couldnt u just use the new enrevoked 3.3 and just run through the process because i manually got the fps update after i got my root and i lost my root acess tell me if im wrong please

allenivers0n3 said:
couldnt u just use the new enrevoked 3.3 and just run through the process because i manually got the fps update after i got my root and i lost my root acess tell me if im wrong please
Click to expand...
Click to collapse
Dude the thread is older than your subscription!
Sent from my PC36100 using Tapatalk

allenivers0n3 said:
couldnt u just use the new enrevoked 3.3 and just run through the process because i manually got the fps update after i got my root and i lost my root acess tell me if im wrong please
Click to expand...
Click to collapse
You dont take updates once you are rooted, just flash a rooted ROM

First of all - Once you have rooted your phone - NEVER NEVER NEVER NEVER NEVER do an OTA update from sprint............
Not sure what your software version is or your hBoot, but if you have 2.02 hboot and 3.30 software, then you can do it the way I did...
having said that - You have not lost root, S-Off = Root, you just lost your recovery... all you need to do is flash a new custom recovery. I use Amon_Ra, but clockwork will work as well... what ever your preferance is...
I cant find the amon_ra that I used, so here is the new CW (attachment 1) - download it - rename it to just (all CAPS except extention!!) "PC36IMG.zip" - Then save it to the root of your SD card. Also save attachment 2 to the root of your SD card.
Boot into hBoot, it will scan the SD card for the PC36IMG.zip - when it asks to do update - click yes... After update completes it will ask to reboot - click NO, then scroll down to flash the superuser app (2nd attachment), I forget what exactly it says but its some thing like "flash from SDcard" or some thing like that...
after you flash the SU.apk, then reboot and if all is good - download ROM manger and flash the Amon_Ra recovery (3rd attachment) and make a NAND backup with Amon_Ra first - cause I'll be honest - I used the CWmod first and I had a bunch of Force Close issues after I did a NAND backup with CW...
Good luck!

how to install oxygen HBOOT

hi
i've just made my desire S-off.
but i wasnt able to flash HBOOT Oxygen rc7
need help
thanks

Did the same thing today, except i was running Oxygen v2.0.3.
All i did was to:
1. Download the PB99IMG_bravo_oxygen.zip from alpharev website
2. Rename it to PB99IMG.zip
3. Place it on the root of the sdcard (not in any subfolders)
4. Enter Hboot (vol-down + power)
5. Here i was asked to update/install , choose "yes"
6. Confirm
Done

spirol said:
Did the same thing today, except i was running Oxygen v2.0.3.
All i did was to:
1. Download the PB99IMG_bravo_oxygen.zip from alpharev website
2. Rename it to PB99IMG.zip
3. Place it on the root of the sdcard (not in any subfolders)
4. Enter Hboot (vol-down + power)
5. Here i was asked to update/install , choose "yes"
6. Confirm
Done
Click to expand...
Click to collapse
thanks for reply
i did as you said
but after i entered HBOOT i wasnt asked to install any update install
it automatically tried to install and appeared following messages
"SD checking
Loading....(PB99DIAG.zip)
No image!
Loading....(PB99DIAG.nbh)
No image or wrong image!
Loading....(PB99IMG.zip)
No image
Loading....(PB99IMG.nbh)
no image or wrong image!"

Then you've not got the file on your SD card

Ok. I checked again
This time i got CID incorrect
Update failed error
Sent from my HTC Desire using XDA App

Think you need a gold card too to do it this way

So what should i do exactly?
Sent from my HTC Desire using XDA App

Flashing Custom MTD/HBOOT
Once S-OFF is done, you are ready to flash the custom MTD/HBOOT. This step changes your internal memory partition table such that the new RoM can fit appropriately while leaving lot of room for user data. Once this is done, the old RoM will no longer work with the new layout of MTD. Before doing this step, ensure all your backups are in place and you have copied all necessary files to the SD Card. (The ROM .zip and the .zip for HBOOT if you are using method 2 below)
Before you do this, it is a good idea to ensure that your HBOOT download is correct and not corrupted. You can do this but checking the MD5 checksum of your download againts the MD5 checksum listed on alpharev site against the download.You can use any of the free tools available.
There are two ways to do this:
Method 1 - fastboot flash: If you downloaded the .img file linked earlier, use the following procedure to install it:
Power down the phone and turn it back on with the back button pressed down; you will see the "fastboot" screen,
From your PC command line, cd into the folder where your android-sdk is and cd into tools folder,
Connect the phone to PC via USB cable,
Run the following command: 'fastboot flash hboot bravo_alphaspl.img' replacing the .img filename with the appropriate path and file name (Eg: C:\Downloads\HTC\RoM's\bravo_alphaspl-cm7.img),
fastboot reboot-bootloader
fastboot erase cache
Select bootloader then select Recovery (use volume up/down to change, and power key to accept the choice),
WARNING: Don't reboot your phone as yet because the MTD you flashed doesn't match your current Rom's layout so it will probably boot-loop or brick your phone,
Method 2 - HBOOT autoflash: If you downloaded the .zip file linked earlier, follow this method:
Rename the .zip file to "PB99IMG.zip" and copy it to the root of your SD card,
Shutdown your phone and restart it into HBOOT (Voldown + power button),
When the phone starts, it automatically will detect the zip file and install the MTD,
Now you can enter recovery and follow the procedure.
Note: Many users have had CID errors when trying this method so it is recommended to use Method 1 above
Click to expand...
Click to collapse
This should do it.

davebugyi said:
This should do it.
Click to expand...
Click to collapse
Method one is the most stable imo

Thank you very much for the posts I have been looking everywhere for good instructions !!
Unfotunately I get the error
"This application has failed to start because adpwinapi.dll was not found. re installing the application may fix this problem"
Do I need to install android SDK manager again?
edit: nevermind. ADB doesnt recognise my phone

Download latest SDK and make sure you download Android SDK platform-tools revision 3, as well (in the additional packages)
Plus you must install the USB drivers from Unrevoked's site.

it gives my this error : cannot load bravo_aplhaspl-oxygen
what should i do?

davebugyi said:
Download latest SDK and make sure you download Android SDK platform-tools revision 3, as well (in the additional packages)
Plus you must install the USB drivers from Unrevoked's site.
Click to expand...
Click to collapse
Ive done both of that,
my list of ADB devices is still blank >.<
Ive tried using HTC sync before trying unrevoked method and still had the same issue

Did you uninstall HTC Sync?
You have to install HTC Sync first, then uninstall it but leave the drivers installed. Then plug the phone in and do the process in the unrevoked-link which davebugyi has already posted.
The adpwinapi.dll-file is in "platform-tools" folder. Just copy that file into the "tools" -folder (the folder, where the fastboot.exe-file is located) and you're done.

Quick question, will this wipe anything on your drive?

TheBlueRaja said:
Quick question, will this wipe anything on your drive?
Click to expand...
Click to collapse
No, it shouldn't, but it's strongly sugggested to nandroid backup your phone beforehand.

Can anyone please explain the advantage of flashing a different HBOOT other than stock rooted one?

LOTS more available memory.
i have the oxygen hboot installed and with a dozen apps i still have 267mb free.
with the stock hboot i would be running out of memory by now

oldskater said:
LOTS more available memory.
i have the oxygen hboot installed and with a dozen apps i still have 267mb free.
with the stock hboot i would be running out of memory by now
Click to expand...
Click to collapse
This memory would be RAM memory, right? We're not talking free space for installs, but rather free mem space for running apps?
Also, do I have to S-off to flash hboot? So far I only have rooted device (rooted using unREVOKED).

nope we are talking about space for installing apps
the oxygen hboot alters the partition sizes for system and cache.
whats left is the data partition and thats all all yours
Stock Hboot about 147mb data partition
new hboot 337
so 190mb more

S-OFF Error

Trying to S-OFF my HTC Desire which is currently running LeeDroid 3.0.5
At the end of the process (USB Method) it says TC-Box:~S
Also says it is unable to enumulate with USB device on Port 1.
Any idea as to why this is happening or what solutions to do?
Thanks

Try CD method, it's the better way to s-off your device There is less bugs
Sent from my HTC Desire using XDA Premium App

Tried that as well. Burnt the ISO to the disk using Magic Iso. EXACTLY the same error :/

robheald said:
Trying to S-OFF my HTC Desire which is currently running LeeDroid 3.0.5
At the end of the process (USB Method) it says TC-Box:~S
Also says it is unable to enumulate with USB device on Port 1.
Any idea as to why this is happening or what solutions to do?
Thanks
Click to expand...
Click to collapse
There was someone else reporting a similar issue. He finally managed to solve it by flashing stock RUU and then going through the whole rooting, s-off-ing and flashing ROM procedure.

I had the same problem.. I used a virtual machine instead of burning a CD!!

Easiest way to do it. Flash stock rooted froyo Rom with no a2sd and s-off.
Had same problem on some other Rom. Used usb, after flashing froyo everything went smooth.
Sent from my HTC Desire using XDA App

I think we are talking about S-OFF with Alpharev?!
Read in a serious german forum this problem could be caused by gingerbread. It is recommended to install a FROYO-Rom for S-OFF with Alpharev.
Detailled instruction:
1.) COMPLETE NANDROID- backup
2.) Download a FROYO- ROM (i used DeFroST)
3.) Copy it on your sd-card
4.) Start your phone in Recovery
5.) Do a FULL Wipe
6.) Flash FROYO- ROM
7.) Reboot your phone completely (to the homescreen of the new ROM)
8.) Download the iso from Alpharev-Homepage, check MD5 if file is complete and burn the ISO on CD
9.) Start your PC with the created disk [eventually u have to change your boot order (disk-drive on first position)]
10.) Follow the instructions on the screen (i only had to connect my Desire with PC in USB-Debug-Mode. Then I waited til i got the message that S-OFF is complete)
11.) After S-OFF is complete, boot your phone into recovery
12.) Restore the constructed backup
13.) Have fun with your previously ROM and S-OFF
Followed these steps tomorrow and it worked properly without any problems.

With this TuT, it´s worked for me...
I was trying about 5 hours to S-Off it... Hours of read threads, google und the questions was here...
Thank you very much
MatDrOiD said:
I think we are talking about S-OFF with Alpharev?!
Read in a serious german forum this problem could be caused by gingerbread. It is recommended to install a FROYO-Rom for S-OFF with Alpharev.
Detailled instruction:
1.) COMPLETE NANDROID- backup
2.) Download a FROYO- ROM (i used DeFroST)
3.) Copy it on your sd-card
4.) Start your phone in Recovery
5.) Do a FULL Wipe
6.) Flash FROYO- ROM
7.) Reboot your phone completely (to the homescreen of the new ROM)
8.) Download the iso from Alpharev-Homepage, check MD5 if file is complete and burn the ISO on CD
9.) Start your PC with the created disk [eventually u have to change your boot order (disk-drive on first position)]
10.) Follow the instructions on the screen (i only had to connect my Desire with PC in USB-Debug-Mode. Then I waited til i got the message that S-OFF is complete)
11.) After S-OFF is complete, boot your phone into recovery
12.) Restore the constructed backup
13.) Have fun with your previously ROM and S-OFF
Followed these steps tomorrow and it worked properly without any problems.
Click to expand...
Click to collapse

MatDrOiD said:
I think we are talking about S-OFF with Alpharev?!
Read in a serious german forum this problem could be caused by gingerbread. It is recommended to install a FROYO-Rom for S-OFF with Alpharev.
Detailled instruction:
1.) COMPLETE NANDROID- backup
2.) Download a FROYO- ROM (i used DeFroST)
3.) Copy it on your sd-card
4.) Start your phone in Recovery
5.) Do a FULL Wipe
6.) Flash FROYO- ROM
7.) Reboot your phone completely (to the homescreen of the new ROM)
8.) Download the iso from Alpharev-Homepage, check MD5 if file is complete and burn the ISO on CD
9.) Start your PC with the created disk [eventually u have to change your boot order (disk-drive on first position)]
10.) Follow the instructions on the screen (i only had to connect my Desire with PC in USB-Debug-Mode. Then I waited til i got the message that S-OFF is complete)
11.) After S-OFF is complete, boot your phone into recovery
12.) Restore the constructed backup
13.) Have fun with your previously ROM and S-OFF
Followed these steps tomorrow and it worked properly without any problems.
Click to expand...
Click to collapse
Interesting. I had problems (device not recognised / supported at this time) trying s-off with rooted stock froyo sense, after making a goldcard.
Never got to the bottom of it but as soon as I flashed oxygen (gingerbread) it worked fine!
CD method best, virtualbox kept crashing for me!

HP246 said:
With this TuT, it´s worked for me...
I was trying about 5 hours to S-Off it... Hours of read threads, google und the questions was here...
Thank you very much
Click to expand...
Click to collapse
No problem. I would really appreciate it if u press the "Thanks- Button" for this.

MatDrOiD said:
I think we are talking about S-OFF with Alpharev?!
Read in a serious german forum this problem could be caused by gingerbread. It is recommended to install a FROYO-Rom for S-OFF with Alpharev.
Detailled instruction:
1.) COMPLETE NANDROID- backup
2.) Download a FROYO- ROM (i used DeFroST)
3.) Copy it on your sd-card
4.) Start your phone in Recovery
5.) Do a FULL Wipe
6.) Flash FROYO- ROM
7.) Reboot your phone completely (to the homescreen of the new ROM)
8.) Download the iso from Alpharev-Homepage, check MD5 if file is complete and burn the ISO on CD
9.) Start your PC with the created disk [eventually u have to change your boot order (disk-drive on first position)]
10.) Follow the instructions on the screen (i only had to connect my Desire with PC in USB-Debug-Mode. Then I waited til i got the message that S-OFF is complete)
11.) After S-OFF is complete, boot your phone into recovery
12.) Restore the constructed backup
13.) Have fun with your previously ROM and S-OFF
Followed these steps tomorrow and it worked properly without any problems.
Click to expand...
Click to collapse
Thank you for that, I will most likely try this at a later date I was trying to get iNsertCoin flashed but of course needed S-Off and hit problems. So sticking with Reflex at the moment which looks exactly the same

[q]Stock rom

Can some one suggest me where download and how installa the stock rom for wildfire.
Now I use a cynogen 7 and i want go back to original froyo + sense

There are 3 primary ways to do that:
1) If you had taken a Nandroid Backup before installing CM7, Just restore that. (But I am assuming you didn't, hence you are asking this)
2) If you want to retain root and Clockworkmod Recovery, just flash this ROM. Its Stock Froyo + Sense:
http://forum.xda-developers.com/showthread.php?t=877977
The process to install that is as follows:
- Download this attachment and place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash in Clockworkmod 3.x or higher. This will give you temporary Clockworkmod 2.5 (Green Text)
- Then, perform a Data Wipe, and install the ROM Zip file as normal.
3) If you dont want to retain root and Clockworkmod
- Download the Froyo RUU from Shipped ROMs (Froyo WWE 2.22.405.1 EXE) from Shipped ROMs:
http://shipped-roms.com/index.php?category=android&model=Buzz
- Connect Wildfire to the PC, and simply run it.

Hi, I'm back
Just 2 questions
I downloaded both files
i copied both files on sd then i started rom manager and tapped on first field to
Flask clockwork mod recovery
Then? what i have to do to revert to Clockworkmod 2.5?
i downloaded this file from the link Safe_Buzz_Froyo_HTC_WWE_2.22.405.1_Rooted
is it true?
3xeno said:
2) If you want to retain root and Clockworkmod Recovery, just flash this ROM. Its Stock Froyo + Sense:
http://forum.xda-developers.com/showthread.php?t=877977
The process to install that is as follows:
- Download this attachment and place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash in Clockworkmod 3.x or higher. This will give you temporary Clockworkmod 2.5 (Green Text)
- Then, perform a Data Wipe, and install the ROM Zip file as normal.
Click to expand...
Click to collapse
I cant find the website ther's a mirror if i want go back to stock with no root rom
3xeno said:
3) If you dont want to retain root and Clockworkmod
- Download the Froyo RUU from Shipped ROMs (Froyo WWE 2.22.405.1 EXE) from Shipped ROMs:
http://shipped-roms.com/index.php?category=android&model=Buzz
- Connect Wildfire to the PC, and simply run it.
Click to expand...
Click to collapse

Ariakan said:
Hi, I'm back
Just 2 questions
I downloaded both files
i copied both files on sd then i started rom manager and tapped on first field to
Flask clockwork mod recovery
Then? what i have to do to revert to Clockworkmod 2.5?
i downloaded this file from the link Safe_Buzz_Froyo_HTC_WWE_2.22.405.1_Rooted
is it true?
I cant find the website ther's a mirror if i want go back to stock with no root rom
Click to expand...
Click to collapse
I can't understand what you mean by your first question at all. Clockworkmod Recovery flashed via ROM Manager is temporary. Your original Clockworkmod will remain untouched. So if you are using the option called Flash Clockworkmod Recovery in ROM Manager, then the next step is to select Reboot into Recovery from the ROM Manager App again, then flash the ROM File. In this case, you can discard the update1.zip file, as it has no significance.
As for your second question, mirrors of the EXE RUU can be found here:
http://forum.xda-developers.com/showthread.php?t=1275680

My first question is simple
on my phone i have rom manager and there is a row named "Flask clockwork mod recovery"
but
i don't know how go back from cynogen to stock rom using clockwork mod recovery
can you help me step by step?
and the stock [with no root] rom for wildfire with froyo is this one?
RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.2 4H_3.35.20.10_release_160191_signed.exe (This RUU contains HBoot 1.01.0001)
i need only to connect the phone to pc and run the exe?

First, decide what you want to do - Flash the EXE RUU, or Flash the Safe Flash ZIP File. If you decide to flash the Safe ZIP file, you will keep Clockworkmod Recovery, which will allow you to flash stuff later. If you select the EXE RUU, Clockworkmod Recovery will be removed, so you will NOT be able to flash anything, like ROMs, Kernels etc.
Once you have decided, here are the steps:
1) If you decide to install the Safe Flash ZIP File
- Download the Safe Flash ZIP from here:
http://forum.xda-developers.com/showthread.php?t=877977
Rooted / Unrooted, Its upto you which version you want. Rooted version has Superuser, so you can run apps like Titanium Backup etc. Unrooted doesnt have Superuser, so you cant run root apps.
- Place this file on your SDCard
- Now, open ROM Manager
- Select Flash Clockworkmod Recovery. Then make sure you select 2.5.0.7. NOT a version beginning with 3.x, 4.x or 5.x
- Once it is installed, in ROM Manager, the next option will be 'reboot into recovery'. Select that
- Once you select that, then you will be taken to Clockworkmod 2.5.0.7 (Which has all its options in Green coloured Text). Here, select "Wipe Data / Factory Reset". This step will erase all data on your phone (Not on your SDcard, Just your phone data. This step is essential when changing ROMs)
- Lastly, select "Install Zip from SDCard", and then, select the ZIP file you placed on your card at the beginning of this step. Let it install. Once installed, Select "Reboot System Now", and let the phone reboot. Done
2) If you decide to run the EXE RUU
- Its pretty much 1 step. Connect the phone to your PC and run the EXE File. It will automatically perform the install. If you get an Error 131 - Customer ID Error, you will need to create a Goldcard. There's a guide for that here:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/

I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7

Did u perform wipe data n clear cache before flashing?
Sent from my HTC Wildfire using XDA Premium App

same question
I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7

shemulweb said:
same question
I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7
Click to expand...
Click to collapse
Flash this zip file in CWM3: (Install Zip from SDCard > Choose Zip from SDCard. (Don't select the "Apply update.zip option)
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
It will give you temporary 2.5.0.7, then you can flash the ROM. (It is temporary, so, everytime you want CWM 2.5.0.7, you will have to flash this Zip file)

CWM queries

I have CWM 3 installed...I want to overwrite it and remove CWM 3 with CWM 5...I update it via recovery and I get temporary CWM 5 ..but how can I completly install CWM 5 over 3..such that whenever I reboot my recovery I get CWM 5 installed totally..help soon pls..

Copy Paste from my Index Thread: (2nd Post, Point #6)
How to Install a new Clockworkmod Recovery Image?
There are 4 basic ways:
1) Via Terminal Emulator (Needs S-OFF) - Guide Here. If you get an error "flash_image: Not Found", follow Steps 1-5 from Here, then, back to the original (first) link. Pushing of flash_image is a 1 time process. You need not repeat it everytime.
2) Via Fastboot (Needs AlphaRev / Revolutionary S-OFF) - Guide Here. Refer the part called "To install Clockworkmod after Revolutionary"
3) Via PC49IMG.zip Process (Needs S-OFF) - Download anyone of the PC49IMG ZIP file of the recovery you wish to install, place on your SDcard, and reboot into HBoot Mode. It will detect the file, and ask to install. Simply select Yes. If you wish to install another version which isn't present below, simply get the IMG file of the recovery version you wish to install,and replace in an existing ZIP. (Without Unzipping)
4) Via Unrevoked (No Pre-Requisites. Works on S-ON / S-OFF devices) - Guide Here

Thnks...
Sent from my HTC Wildfire using XDA Premium App

PC49IMG didnt work for me. However, Terminal emulator did
thanks