Hey guys I was just wondering seeing as how the note had the same exact specs as our phone save for the screen size, resolution, and s pen would it be possible for their roms to work with ours? Like the skyrocket
Sent from my SGH-T989 using XDA
Isn't their chipset a 8660 whereas ours is a 8060?
edit: wait the N7003 variant has our chipset. there is a good possibility then.
I tried to flash one, and got stuck at the samsung logo, I'm not sure if it's because I didn't change the kernel or something.
cashyftw said:
I tried to flash one, and got stuck at the samsung logo, I'm not sure if it's because I didn't change the kernel or something.
Click to expand...
Click to collapse
Did it brick?
nyamd20 said:
Did it brick?
Click to expand...
Click to collapse
It was stuck on the samsung logo, I was able to get into recovery and flash one of our roms.
Try to flash one of the Skyrocket kernels, after flashing the Note one.
alphadog32 said:
Try to flash one of the Skyrocket kernels, after flashing the Note one.
Click to expand...
Click to collapse
That wouldn't help the skyrocket kernels are the same as our phone. The phone would of at least booted if the notes kernel were the same as ours.
Both would boot. Both have EXACT hardware.
alphadog32 said:
Both would boot. Both have EXACT hardware.
Click to expand...
Click to collapse
It shouldn't matter if they flash a skyrocket kernel with the NOTE ROM because the skyrocket kernel is the same as the hercules except for orientation.
Related
Hi, I might have a chance at getting a deal on a SGH-T989D from a former Telus customer. But almost all the roms here are described as being for the SGH-T989. Are these phones not the same where you can run the same roms? Definitely don't want to buy a phone that has no developer support even if the deal is good.
It can run the same rom.
Sent from my SGH-T989
If you are on TMO you should be able to flash a TMO radio without any issues as well ..... as long as the phone is UNLOCKED ...
What's the"d" stand for?
both models are identical, down to the D
850Mda said:
What's the"d" stand for?
Click to expand...
Click to collapse
Derp
AllGamer said:
both models are identical, down to the D
Click to expand...
Click to collapse
I thought so as well..
Sent from my SGH-T989 using xda premium
Yes I am confused about this as well. If these phones are identical and can both run the same roms, then why THIS post indicating that the roms in this forum are only for *TMobile* GSII's? With emphasis put on TMobile.
Thanks.
Tempott said:
Yes I am confused about this as well. If these phones are identical and can both run the same roms, then why THIS post indicating that the roms in this forum are only for *TMobile* GSII's? With emphasis put on TMobile.
Thanks.
Click to expand...
Click to collapse
I'm using the Telus version (T989D) and as far as I can tell, the only difference is the button combo to get into download mode. I've flashed a number of roms from this sub forum and they don't work any differently.
Sent from my SGH-T989 using xda premium
Tempott said:
Yes I am confused about this as well. If these phones are identical and can both run the same roms, then why THIS post indicating that the roms in this forum are only for *TMobile* GSII's? With emphasis put on TMobile.
Thanks.
Click to expand...
Click to collapse
Mainly to differentiate from the i9100 SGSII variants.
Also, the T989D has no exterior Telus branding.
RetroSA said:
I'm using the Telus version (T989D) and as far as I can tell, the only difference is the button combo to get into download mode. I've flashed a number of roms from this sub forum and they don't work any differently.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thanks for the conformation.
Tempott said:
Yes I am confused about this as well. If these phones are identical and can both run the same roms, then why THIS post indicating that the roms in this forum are only for *TMobile* GSII's? With emphasis put on TMobile.
Thanks.
Click to expand...
Click to collapse
fideli. said:
Mainly to differentiate from the i9100 SGSII variants.
Also, the T989D has no exterior Telus branding.
Click to expand...
Click to collapse
also because at the time we didn't know the T989 was also compatible with the I727
I keep reading they are the same but I have not been able to get any of the ICS ROMS for the T-Mobile ROMS to work on my Telus phone.
dextroamphetamine said:
I keep reading they are the same but I have not been able to get any of the ICS ROMS for the T-Mobile ROMS to work on my Telus phone.
Click to expand...
Click to collapse
It's really hard to get the ICS ROMs to work sometimes. They seem to be pretty finicky. I've read some users have had to do a Superwipe, flash the ROM, then wipe the data and cache again and reflash.
I can confirm that Racing's, RaverX3X's and the Cleansed ICS are all capable of running on my T989D.
Are you sure these two are identicial in terms of hardware?
then Why can't I odin flash stock T-mobile ROM?
Odin flashing Stock Telus ROM is no problem.
I want T-mobile stock and it wont let me GRRRR
sharpeyedman said:
Are you sure these two are identicial in terms of hardware?
then Why can't I odin flash stock T-mobile ROM?
Odin flashing Stock Telus ROM is no problem.
I want T-mobile stock and it wont let me GRRRR
Click to expand...
Click to collapse
They are identical hardware-wise. Why would you want to flash the stock T-Mobile ROM? Telus is less bloated.
Sent from my Samsung SGH-T989D using xda premium
skadude66 said:
They are identical hardware-wise. Why would you want to flash the stock T-Mobile ROM? Telus is less bloated.
Sent from my Samsung SGH-T989D using xda premium
Click to expand...
Click to collapse
Yes of coarse, believe me I love Telus ROM better. well not just ROM, the exterior of T989D looks even much better as hideous T-mobile logo is nowhere to be found.
Since I am on T-mobile network, I just wanted to try T-mobile stock from the core. Reinstalling drivers now, before reflashing odin.
---------- Post added at 01:11 PM ---------- Previous post was at 01:02 PM ----------
It keeps failing at the very end of flashing process. while doing this toward the end of the flashing process-> amss.bin
I wonder what is wrong.
http://forum.xda-developers.com/showthread.php?t=1513359
Has anyone tried flashing latest T-mobile stock on T989D?
I gave up on Odin flashing my T989D with T-mobile stock.
I have tried both KID and VK but both fail at the same spot. It would fail at around at 98% mark.
I flashed Telus Stock now and then rooted it again. It's running flawless.
Too bad I can not try T-mobile wifi calling. I never use wifi calling on other capable phones anyways but I wanna have all the options available
Please let me know if any Telus owners out there who have successfully odin flashed T-mobile original stock unrooted on their S II X.
also one has Corning Gorilla Glass and the other doesnt I believe the telus one doesnt have it.
but check the chart on gsmarena.com
http://www.gsmarena.com/compare.php3?idPhone1=4468&idPhone2=4129
sharpeyedman said:
I gave up on Odin flashing my T989D with T-mobile stock.
I have tried both KID and VK but both fail at the same spot. It would fail at around at 98% mark.
I flashed Telus Stock now and then rooted it again. It's running flawless.
Too bad I can not try T-mobile wifi calling. I never use wifi calling on other capable phones anyways but I wanna have all the options available
Please let me know if any Telus owners out there who have successfully odin flashed T-mobile original stock unrooted on their S II X.
Click to expand...
Click to collapse
Hi, If you want to enable T-mobile wifi calling you can pull the kernel out from the tar.md5 by using 7-zip and/or WinRAR. You should see boot.bin and or boot.tar that will have the kernel modules KinetoGAN required for wifi calling. You should be able to fine a flash package in the T-mobile section that will enable the RIL switch. I would suggest this process:
Flash stock Telus
Flash CF root
Flash RIL package for T-mob
Flash the bin file you extracted from the T-mobile ROM package
Run the CF-unroot script.
Done!
PS: I stumbled across this whilst looking for info in the SGH-T989 for making a kernel for a non-developed Galaxy Tab 8.9 4G/LTE...I know a little about wifi calling so thought I would throw that in there for you goodluck
As of right now, the roms for your S3 are not meant to be used on other S3 variants. Bricks might happens or a soft one might happen. Before flashing a Rom make sure you are in the right development section an you read the entire op, twice. Until other devs or experienced users find a way to make them cross compatible, please refrain from using other carriers S3 roms.
Also wind mobile an Tmobile are interchangeable, just don't flash the modems.
ONLY FLASH THE ROMS IN THIS FORUM!
Mr.Highway said:
As of right now, the roms for your S3 are not meant to be used on other S3 variants. Bricks might happens or a soft one might happen. Before flashing a Rom make sure you are in the right development section an you read the entire op, twice. Until other devs or experienced users find a way to make them cross compatible, please refrain from using other carriers S3 roms.
Click to expand...
Click to collapse
I second this, guys PLEASE don't risk it. It is not worth it. Right now I think most devs are working on their own ROMs, but we should have a patch soon to allow cross-compatibility.
think some peeps are confused by whats before tmo development. (AT&T, T-Mobile, Sprint, Verizon Samsung Galaxy S III) just my opinion but good idea on thread.
Mr Highway:
Could you start another thread for Windmobile Android Development?
In the past all Windmobile phones are just T-mobile phone rebadge.
In this case, it does not in terms of kernels....(and may be baseband)
I am working on this so that all roms will work on all carriers
http://forum.xda-developers.com/showthread.php?t=1735482
Mr.Highway said:
As of right now, the roms for your S3 are not meant to be used on other S3 variants. Bricks might happens or a soft one might happen. Before flashing a Rom make sure you are in the right development section an you read the entire op, twice. Until other devs or experienced users find a way to make them cross compatible, please refrain from using other carriers S3 roms.
Click to expand...
Click to collapse
AMEN!! Some fool I know ALREADY called me with a bricked gs3! I'm gonna sit back and let the pros do their thing, and that's DEFINITELY the safest bet!
thanks for the reminder and jsut to make sure ....
i have rogers sgh-i747
i want to be in this AT&T, T-Mobile, Sprint, Verizon Samsung Galaxy S III - xda-developers thread for everything correct ?
and not in the Samsung Galaxy S III I9300 thread ?
I keep seeing posts about ROMs that can work on these variants of galaxy S3s. Now correct me if I'm wrong, but aren't the ROMs supposed to be specific to GSM or CDMA? When I flashed windows based roms on my touch pro II, that was one of the things to look out for. Is it possible to create a ROM for all carriers?
Alik4041 said:
I keep seeing posts about ROMs that can work on these variants of galaxy S3s. Now correct me if I'm wrong, but aren't the ROMs supposed to be specific to GSM or CDMA? When I flashed windows based roms on my touch pro II, that was one of the things to look out for. Is it possible to create a ROM for all carriers?
Click to expand...
Click to collapse
Yes and no.
With the use of aroma-installer, we could set it up to detect your phone type (well, not we....I don't know that much about it but I saw the thread discussing this) and aroma would be able to install the necessary files based on your phone.
As of now, for instance, mine works across all GSM carriers. clark44 is current working to get everything switched up so it also works for Sprint (mostly appears to be the apk files and XML files) that are specific to the phone. As of now, he has it booting and working fine except there is a large rush of FCs on initial bootup but then everything runs fine.
I wasn't even aware you could make a patch to allow cross-compatibility! XDA never fails to surprise
Just a thought, but maybe they could do it like the SlimROM on multiple devices. He has a common base ROM and another flashable for each device supported. It works out perfectly and multiple ROMs for multiple carriers.
I figure it will be easier than doing it for different devices since I read that all the US variants are essentially the same. Not sure but worth a look.
link to the ROM: http://www.slimroms.com/
I use it for the Vibrant
Sent from my SGH-T959 using Tapatalk 2
Will there ever be any SGH-T999V development?
Does anyone think that someone with a SGH-T999V Wind Mobile variant will ever be able to root their phone so they can overclock the cpu, etc?
Why not? I am using a custom rom and overclocked to 1890 at the moment.
Just use the windows way to root. I knbow it works
I have not tried the toolkit.
If you are going to flash a custom rom just make sure it does not contain the boot, modem and amss file in the rom that you are flashing.
LXXIII said:
Does anyone think that someone with a SGH-T999V Wind Mobile variant will ever be able to root their phone so they can overclock the cpu, etc?
Click to expand...
Click to collapse
What about using i9300 themes and mods? Will this cause constant FCs or other issues?
LXXIII said:
Does anyone think that someone with a SGH-T999V Wind Mobile variant will ever be able to root their phone so they can overclock the cpu, etc?
Click to expand...
Click to collapse
I am curious of this too. I have the wind mobile galaxy s 3 and I was hoping to put cyanogenmod on it. Is this possible? Let me know, any help would be appreciated.
Sent from my SGH-T999V using Tapatalk 2
I'm more curious as to what exactly the differences are between the 2 variants (i.e. t999 vs t999v). What could possibly make them so different from each other that ROMs from tmobile wouldn't work on wind GS3?
What if you accidentally tried to flash i9300 rom and your phone is not turning on.
With the forums changed I accidentally flashed the wrong version rom on my phone. :crying:
TheLegace said:
What if you accidentally tried to flash i9300 rom and your phone is not turning on.
With the forums changed I accidentally flashed the wrong version rom on my phone. :crying:
Click to expand...
Click to collapse
Try to use odin to go back to stock, that's what I'm thinking, but I don't own the S3
Mr.Highway said:
Try to use odin to go back to stock, that's what I'm thinking, but I don't own the S3
Click to expand...
Click to collapse
correct and theres a thread about just that mistake.
http://forum.xda-developers.com/showthread.php?t=1727401
darren.wlsn1 said:
correct and theres a thread about just that mistake.
http://forum.xda-developers.com/showthread.php?t=1727401
Click to expand...
Click to collapse
Thanks for the link, unfortunately the phone will not go into download mode for odin, it won't even turn on.
After doing some research it looks like I have to fix it through jtag.
I think I could do it, but you need some expensive jtag box that connects to the computer(It's called the Riff Box), but it would be cheaper if I just sent my phone into here it costs $60. Not ideal, but not a complete disaster either. Unless there is some other way to JTAG I am out of options.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Thanks.
Maybe a newb question but if all the Galaxy Note 2 devices are the same (hardware wise), can we just take a N7100 or sprint or att rom, unzip it, and remove the radio.img and kernel.img and flash over our cleanly wiped stock ROM? I'm just curious what it'll take to get some of the better N7100 ROM's going on our device.
farfromovin said:
Maybe a newb question but if all the Galaxy Note 2 devices are the same (hardware wise), can we just take a N7100 or sprint or att rom, unzip it, and remove the radio.img and kernel.img and flash over our cleanly wiped stock ROM? I'm just curious what it'll take to get some of the better N7100 ROM's going on our device.
Click to expand...
Click to collapse
Basically,
N7105, AT&T, T-Mobile Note 2's are compatible with one another.
The N7100 ROMs will nuke other Note 2's because of difference is hardware. DO NOT install. In it's current form, it will nuke your IME and you will not be able to get any service (I learned the hard way).
Once the N7105 gets AOSP, the other should quickly follow suit due the congruent hardware platform.
so i can go to the att section of xda adn download whatever roms there and install on my tmo version without any hassle or modification?
Pretty much yes. You'll have to install a T889 kernel and Modem after you flash it. Unfortunately, the AT&T ROMS don't really have that much more offer us.
Sent from my SGH-T889 using xda app-developers app
So we have 3 versions?
1: N7100
2: N7105/Tmo/ATT
3: VZW/SPR
And the differences would be in kernels and radio's, but ROM's should cross?
DarthPiggie said:
Pretty much yes. You'll have to install a T889 kernel and Modem after you flash it. Unfortunately, the AT&T ROMS don't really have that much more offer us.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
modem? this is a new term to me. im used to only updating roms and kernels...another word for radio maybe?
farfromovin said:
So we have 3 versions?
1: N7100
2: N7105/Tmo/ATT
3: VZW/SPR
And the differences would be in kernels and radio's, but ROM's should cross?
Click to expand...
Click to collapse
Yes bur ROMs are not compatible across devices in different numbers (from your list)
I am going to start trying to build AOSP for the TMOBILE version. Hopefully something comes out of that. I'll need an AOSP kernel first.
Sent from my SGH-T889 using xda app-developers app
DarthPiggie said:
Yes bur ROMs are not compatible across devices in different numbers (from your list)
I am going to start trying to build AOSP for the TMOBILE version. Hopefully something comes out of that. I'll need an AOSP kernel first.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Correct, they would need ported from 1 to 2, 2 to 3, etc... Whereas if they're in the same "family" all the differences lie in the kernel and radio. That stuff can be pulled out, reflashed on top, etc. Easy day
When I flash this boot.img from SCH-i535 LK3 rom,G-Senor is opposite,for example,when browser shows Horizontal screen,address bar is on the top.Any body can fix this kernel? You can email me [email protected].
Re: [Q] Any body can fix this kenrel(boot.img) from i535 LK3 to our L710
meiyijun001 said:
When i flash this boot.img from SCH-i535 LK3 rom,G-Senor is opposite,for example,when browser shows Horizontal screen,address bar is on the top.Any body can fix this kenrel?
Click to expand...
Click to collapse
Using kernels from the other variants gives us this problem. Early T-Mo JB leaks that were ported over to our device had this bug present. From what I remember, it's due to a slight difference in sensors used or a difference in how the sensors were implemented within the kernel. Anywho, it should be possible to fix seeing as how kernel source has been released. May I inquire as to why you want to flash another variant's boot.img though?
Also, next time remember to post your questions within the question sub forum. This is the development sub forum and is intended for developers to post their work.
Sent from my SPH-L710 using xda premium
Re: [Q] Any body can fix this kenrel(boot.img) from i535 LK3 to our L710
Questions go in Q&A
Thread moved
Sent from my SPH-L710 using xda premium
Any body can fix it,thanks!
You shouldn't be flashing anything made for a different phone. I really doubt any dev will try and port a kernel, but I may be wrong. You're lucky you didn't brick your phone.
metalfan78 said:
You shouldn't be flashing anything made for a different phone. I really doubt any dev will try and port a kernel, but I may be wrong. You're lucky you didn't brick your phone.
Click to expand...
Click to collapse
sch-i535，sgh-i747，sgh-t999 and our device are the same，it dosn't matter.
Yes it does matter, different models, different carriers, different software. There may be little differences but there are still differences.
metalfan78 said:
Yes it does matter, different models, different carriers, different software. There may be little differences but there are still differences.
Click to expand...
Click to collapse
Yes,so I want to fix this kernel to our device,any body can guide me?
meiyijun001 said:
sch-i535，sgh-i747，sgh-t999 and our device are the same，it dosn't matter.
Click to expand...
Click to collapse
You keep thinking that and flashing crap from other devices, just don't come crying here when you're hard bricked. Not exactly sure why you want a stock kernel from another device anyways its not gonna be any different from the sprint s3 stock kernel except the different drivers needed for the different hardware.
I like to break stuff!
-EViL-KoNCEPTz- said:
You keep thinking that and flashing crap from other devices, just don't come crying here when you're hard bricked. Not exactly sure why you want a stock kernel from another device anyways its not gonna be any different from the sprint s3 stock kernel except the different drivers needed for the different hardware.
I like to break stuff!
Click to expand...
Click to collapse
I flash it to L710,it's OK.It just has some bugs.
meiyijun001 said:
I flash it to L710,it's OK.It just has some bugs.
Click to expand...
Click to collapse
Yea theres no point in porting a stock kernel when theres already a working version of the same damn thing available.
I like to break stuff!
Is anyone working on a port from the tmo s4 to the tmo s3?? It is 4.2 TW isnt it?? Would love to see it..
I have started to look into it but may need custom kernel, and not quite sure all the files I need to get it to boot... will keep this thread updated as progress is made
Sent from my GT-I9300 using Tapatalk 4 Beta
There's GlamourS4 for the international S3. It's still buggy, but once it gets better, could anyone port that? I'm not sure how difficult porting can be though..
limen123 said:
There's GlamourS4 for the international S3. It's still buggy, but once it gets better, could anyone port that? I'm not sure how difficult porting can be though..
Click to expand...
Click to collapse
I believe the international s3 is different from our phone. Theres's already custom roms for d2tmo for the s4 so i would say it would be easier to port from d2tmo S4 then it would be from the international s4
OdiemanSAM said:
I have started to look into it but may need custom kernel, and not quite sure all the files I need to get it to boot... will keep this thread updated as progress is made
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thats all anyone could ask bro.. thanks
I know it's a different model, but wouldn't it be easier porting a ROM from a different S3, which would be more similar to our phone, than a completely new S4? I'm sincerely asking because I don't know much about porting and all.
limen123 said:
I know it's a different model, but wouldn't it be easier porting a ROM from a different S3, which would be more similar to our phone, than a completely new S4? I'm sincerely asking because I don't know much about porting and all.
Click to expand...
Click to collapse
Touch Wiz is Touch Wiz.. Tmobile is Tmobile. A Tmobile rom would be much easier to port then an international s3
the i9300 and t999 are to different due to the cpu . if you can trick the i9300 rom to think the t999 is the i9300 than maybe its pssible
Ok so its been slow going but I finally got a boot logo and animation but stuck in boot loop. Anyone know how to force 4.2.2 to enable android debugging? As of right now I am using all 4.2.2 files, mostly from s4 but needed kernel an libs for cooked rom. Will let you know how it goes.
OdiemanSAM said:
Ok so its been slow going but I finally got a boot logo and animation but stuck in boot loop. Anyone know how to force 4.2.2 to enable android debugging? As of right now I am using all 4.2.2 files, mostly from s4 but needed kernel an libs for cooked rom. Will let you know how it goes.
Click to expand...
Click to collapse
Wow.. great news! Forgot i even made this thread.. lol
OdiemanSAM said:
Ok so its been slow going but I finally got a boot logo and animation but stuck in boot loop. Anyone know how to force 4.2.2 to enable android debugging? As of right now I am using all 4.2.2 files, mostly from s4 but needed kernel an libs for cooked rom. Will let you know how it goes.
Click to expand...
Click to collapse
You should be able to by editing build.prop if I'm not mistaken.
Sent from my SGH-T999L using xda app-developers app