Related
I Need some help badly i am new to this but i have had some other htc phones i purchased this phone on the net and it keeps resetting itself whenever it is off the usb connection..i have flashed other roms but still doing it please help paid alot for phone and dont wanna use phone as coaster
Try a hard reset, if that doesn't work flash to your original stock ROM it sounds like the ROM/Radio version is screwed up...But it should Flash no problem as long as you can get bootloader..
need original rom for sprint touch "vogue"
need original rom....help please
here:http://www.htc.com/us/supportdownloadlist.aspx?p_id=76&act=sd&cat=all
What happened after the hard reset? What ROM did you flash?
no luck
froze at 29 percent...so had to load another rom i had....HELP
Heres what happened
thechampjt said:
what happened after the hard reset? What rom did you flash?
Click to expand...
Click to collapse
1:nothing
2:it looks like a touch diamond rom
JARVISLEROUGE said:
1:nothing
2:it looks like a touch diamond rom
Click to expand...
Click to collapse
What?!
ROMs are device specific.
May be no turning back here.
Break thru...i think
Downloaded rom version 1.06.sprint radio version 3.37.10.....so far so good...wish me luck...please send info on how to correct the problem if it were to happen again
spoke too soon
reset after 7 minutes ...longer than usaul so its a good sign please help me I hope its safe to assume that if it is doing this it is "saveable" right?
JARVISLEROUGE said:
reset after 7 minutes ...longer than usaul so its a good sign please help me I hope its safe to assume that if it is doing this it is "saveable" right?
Click to expand...
Click to collapse
STOP!
Please don't do anything else.
Where did you download the ROM? What thread?
help
i went on the "upgrade vogue" page and searched the the pages the file is nsffans sprint 1.06
somewhere in between 1 and 100
is there anyway to just make this work or is it a lost cause
if it were to late wouldnt it be just "dead"
i would really appreciate if you could help
You have a GPS enabled ROM with a non-GPS enabled radio. Please upgrade your radio.
JARVISLEROUGE said:
i went on the "upgrade vogue" page and searched the the pages the file is nsffans sprint 1.06
somewhere in between 1 and 100
is there anyway to just make this work or is it a lost cause
if it were to late wouldnt it be just "dead"
Click to expand...
Click to collapse
Ok ok.
First off, READ before flashing! If you did, this wouldn't have happened.
Next, what OS are you using? XP? Vista? Are you running it inside of a virtual machine? (like inside Mac OS X) Because that could brick your device.
Did you try unlocking your device before you flashed the ROM? You must do this before flashing to custom ROMS.
What does your bootloader screen say? What are your ROM and Radio versions?
you need to upgrade your radio 3.42.50 then reflash the ROM...
Wonder if he got it fixed?
Hi,
I am fairly new to rooting (infact this is my first post).So,please be gentle if i am violating any rules.
I had put JELLY BAM on my GNEX and it was running fine. I tried partitioning my memory which did not go well so then I tried reflashing my ROM , which again did not go well and accidentally i deleted my ROM and all of my backups. So basically I am not able to use my GNEX .
I have no ROM and was only able to access bootloader and recovery menu (TWRP) . So i tried flashing it thru NRT(by wugsfresh) and since then I am stuck in bootloop(Was trying to flash stock JDQ39) & upon that I am back to stock recovery of android. Also, now PC is not ready to detect my GNEX as ADB device.
Please help me out, I am in dire need of it. Cant find a simillar issue any where else.
Thanks in advance.
follow this: http://forum.xda-developers.com/showthread.php?t=1626895
work in progress
Zepius said:
follow this: http://forum.xda-developers.com/showthread.php?t=1626895
Click to expand...
Click to collapse
Thanks for the prompt reply. Halfway thru ..
Zepius said:
follow this: http://forum.xda-developers.com/showthread.php?t=1626895
Click to expand...
Click to collapse
Nopes, still stuck in bootloop. Tried the tutorial twice now.
Also, earlier i was following the same procedure albeit from NRT.
Please suggest what is wrong with my phone and a possible solution
madforsoccer said:
Nopes, still stuck in bootloop. Tried the tutorial twice now.
Also, earlier i was following the same procedure albeit from NRT.
Please suggest what is wrong with my phone and a possible solution
Click to expand...
Click to collapse
put simply you probably trashed your partitions. you might have to use ODIN to repartition
madforsoccer said:
Nopes, still stuck in bootloop. Tried the tutorial twice now.
Also, earlier i was following the same procedure albeit from NRT.
Please suggest what is wrong with my phone and a possible solution
Click to expand...
Click to collapse
I had a similar problem. I thought it was because my disk was partitioned-screwed. So I tried this: http://forum.xda-developers.com/showthread.php?t=2065470
It didn't work for me, but it's worth a shot for you. Give it a go.
Will try the ODIN method.
Also, do you think I am experiencing persistent boot-looping because I wiped off my 'system' (did it for the first time)
coz i have been flashing ROM's and kernels on weekly basis now and this has never happened before.
Still not working, tried the ODIN part also, still stuck in boot-loop.
I jus want to know what exactly is the problem here..!!
getting frustrated now.
Hi all,
Since I am facing difficulties flashing ROM. IF only someone can share a backup image of ROM (CWM/TWRP) with me I can get it restored and flash another ROM later on as need be.
You said you partitioned your memory. What exactly do you mean by this, what did you do?
cupfulloflol said:
You said you partitioned your memory. What exactly do you mean by this, what did you do?
Click to expand...
Click to collapse
I was trying to implement swapper on my gnex , which when failed led to this mess i am in currently.
Hi all,
I need help. I installed Carbon ROM on my rooted I9195, I was having problems with the phone dialler rebooting the phone so I have restored my original Samsung Firmware from a backup. But now I cannot download images from Whatsapp, backup files or install swiftkey etc. Appears that I still have Kitkat SD card restrictions even though I have gone back to Jellybean. I have searched everywhere but cannot find a solution. I'm hoping someone here can help me . HELP!!
davidmlondon said:
Hi all,
I need help. I installed Carbon ROM on my rooted I9195, I was having problems with the phone dialler rebooting the phone so I have restored my original Samsung Firmware from a backup. But now I cannot download images from Whatsapp, backup files or install swiftkey etc. Appears that I still have Kitkat SD card restrictions even though I have gone back to Jellybean. I have searched everywhere but cannot find a solution. I'm hoping someone here can help me . HELP!!
Click to expand...
Click to collapse
Have you tried the kit kat sd fix?
Flatric said:
Have you tried the kit kat sd fix?
Click to expand...
Click to collapse
Thanks for the reply. I tried to install the kitkat SD fix but it isn't compatible with my phone now I've re-installed Jellybean. I also tried editing the platform.xml file to add write permissions but that didn't work either. I would happily use a kitkat rom but every one I tried has problems with the dialer, can't hear anyone and then the phone reboots.
davidmlondon said:
Hi all,
I need help. I installed Carbon ROM on my rooted I9195, I was having problems with the phone dialler rebooting the phone so I have restored my original Samsung Firmware from a backup. But now I cannot download images from Whatsapp, backup files or install swiftkey etc. Appears that I still have Kitkat SD card restrictions even though I have gone back to Jellybean. I have searched everywhere but cannot find a solution. I'm hoping someone here can help me . HELP!!
Click to expand...
Click to collapse
davidmlondon said:
Thanks for the reply. I tried to install the kitkat SD fix but it isn't compatible with my phone now I've re-installed Jellybean. I also tried editing the platform.xml file to add write permissions but that didn't work either. I would happily use a kitkat rom but every one I tried has problems with the dialer, can't hear anyone and then the phone reboots.
Click to expand...
Click to collapse
Have you tried to flash a firmware with odin?
Flatric said:
Have you tried to flash a firmware with odin?
Click to expand...
Click to collapse
No, I restored it from a backup I made before I rooted my phone. I will try that. Thanks:good:
Annoyingly I can't download the original firmware. The only place I can find is rapid gator and it fails after about an hour. Any ideas where I can get the original firmware for my phone?
How difficult can it be to get an original firmware? I just can't get it to download from rapidgator and Samsung don't seem to have direct downloads. Stuck with a knakered phone.
@davidmlondon Did u try sammobile.com ? The official firmwares are hosted on their servers and offer good speeds. But need to create a free account to access firmware downloads. Alternatively you can try samsung-updates.com If i am right they provide 2 links for all roms and u can try any. Good luck.
BTW why do u wanf to return to jb? official kitkat is good enough.
sasank360 said:
@davidmlondon Did u try sammobile.com ? The official firmwares are hosted on their servers and offer good speeds. But need to create a free account to access firmware downloads. Alternatively you can try samsung-updates.com If i am right they provide 2 links for all roms and u can try any. Good luck.
BTW why do u wanf to return to jb? official kitkat is good enough.
Click to expand...
Click to collapse
Thanks. Will give that a go. I would rather use Kitkat but every ROM I try has the same problem with the dialer crashing and making the phone reboot. Sometimes people can hear me but I can't hear them and then the phone reboots. Sometimes it just freezes, makes a screeching noise and reboots. I also notice that the signal drops to nothing, which I think is related to the dialler crashing.
davidmlondon said:
Thanks. Will give that a go. I would rather use Kitkat but every ROM I try has the same problem with the dialer crashing and making the phone reboot. Sometimes people can hear me but I can't hear them and then the phone reboots. Sometimes it just freezes, makes a screeching noise and reboots. I also notice that the signal drops to nothing, which I think is related to the dialler crashing.
Click to expand...
Click to collapse
did u try different modems like cnf7, cne6, cnh5 and any other. Usually network related issues are due to modems. I see that you are from UK. As far as I can remember samsung did not seed kitkat to uk. So you need to flash firmware of country close to UK like france or germany. Also before and after flashing stock kitkat wipe data/factory reset. And after flashing verify if baseband/modem changed to new one. Good luck
sasank360 said:
did u try different modems like cnf7, cne6, cnh5 and any other. Usually network related issues are due to modems. I see that you are from UK. As far as I can remember samsung did not seed kitkat to uk. So you need to flash firmware of country close to UK like france or germany. Also before and after flashing stock kitkat wipe data/factory reset. And after flashing verify if baseband/modem changed to new one. Good luck
Click to expand...
Click to collapse
Haven't tried a different modem. Might give that a go before I go back to stock. I downloaded the German version from Sam Mobile. It downloaded successfully. :good: Will try changing the modem before I reflash to stock. I'm using carbon ROM, so will research which modem to flash before I do anything. Thanks for all your help. :good:
Hi
I have a problem. I searched solution in google and on this forum but i can't find working solution. So I flashed this rom: http://forum.xda-developers.com/xperia-m/development/rom-resurrection-remix2013266094-t3217455
and when I wanted to call to someone pop-up is showing this text "Unfortunately, Phone has stopped". I had same problem with Cyanogenmod 12 and 12.1. This is so annoying that i can't repair it alone. I hope for fast help.
tarzan9521 said:
Hi
I have a problem. I searched solution in google and on this forum but i can't find working solution. So I flashed this rom: http://forum.xda-developers.com/xperia-m/development/rom-resurrection-remix2013266094-t3217455
and when I wanted to call to someone pop-up is showing this text "Unfortunately, Phone has stopped". I had same problem with Cyanogenmod 12 and 12.1. This is so annoying that i can't repair it alone. I hope for fast help.
Click to expand...
Click to collapse
did you clean install before install any custom rom? like cyanogenmod or RR? try to wiped system , data , cache and internal storage. and try to install that with no any gapps package is installed. if problem is fixed may be problem is from your gapps package, but if problem still exist i want to ask something. are you dual sim device or single sim device?
EDIT : and remember. before install cm 12 and up you need base rom android 4.3 or 15.4.A.1.9 to running this custom rom properly or same with dual sim device
I'm Single sim. I did full wipe before installing it. I tried also without gapps. So now i got another problem. Because my USB port in phone doesn't work. So i can't flash stock rom :/ Zipaligned stock rom will work?
tarzan9521 said:
I'm Single sim. I did full wipe before installing it. I tried also without gapps. So now i got another problem. Because my USB port in phone doesn't work. So i can't flash stock rom :/ Zipaligned stock rom will work?
Click to expand...
Click to collapse
i don't know, but flash ftf stock firmware is required for back it stock .
hmmm may be you need to ask another member here, try to contact @Bonoboo or send pm to him. i think he can solved it
Nicklas Van Dam said:
may be you need to ask another member here, try to contact @Bonoboo or send pm to him. i think he can solved it
Click to expand...
Click to collapse
Again, I'm not developer to resolve problems in ROM's.
tarzan9521 said:
and when I wanted to call to someone pop-up is showing this text "Unfortunately, Phone has stopped". I had same problem with Cyanogenmod 12 and 12.1
Click to expand...
Click to collapse
At least try to get logcat to know what's wrong.
Install app Logcat Extreme
Launch and give root
Press 4th button and tap Confirm
Minimize app and produce crash
Return to app
Press button with floppy disc
Select Save current log
Upload file from folder /sdcard/LogcatX
Also you can back to stock without PC: use backup
This really can be solution. Maybe radio stuck in bad state due custom ROM's.
Now I got all what I need to be happy Now I will try back to stock with thread you posted and I will write if everything will be ok. BIG THANKS to you
Everything is now ok Finally all works. I'll stand with stock rom, maby little change it. Thx for help
tarzan9521 said:
Finally all works. I'll stand with stock rom, maby little change it
Click to expand...
Click to collapse
Reverting to stock was suggested as fix for custom ROM's.
So maybe try them too. Curious about result.
Bonoboo said:
Reverting to stock was suggested as fix for custom ROM's.
So maybe try them too. Curious about result.
Click to expand...
Click to collapse
So maybe you recommend any rom? Now i got another problem! The Volume +/- buttons doesn't work :/
Hi all,
My zenfone 2 just got messed up after flashing the echoe kernel.
Rom was fine, but the kernel messed everything up. At first the fast charging went missing and the mtp didnt fucntion, also usb otg cannot be detected.
so started my twrp and wanted to flash stock 160 fw. i keep getting the error below;
E:extractTarfork() process ended with error = 255.
I have tried sideload but again, pc doesnt detect my zenfone 2.
Please help...want to go back to stock rooted.
carnby24 said:
Hi all,
My zenfone 2 just got messed up after flashing the echoe kernel.
Rom was fine, but the kernel messed everything up. At first the fast charging went missing and the mtp didnt fucntion, also usb otg cannot be detected.
so started my twrp and wanted to flash stock 160 fw. i keep getting the error below;
E:extractTarfork() process ended with error = 255.
I have tried sideload but again, pc doesnt detect my zenfone 2.
Please help...want to go back to stock rooted.
Click to expand...
Click to collapse
flash prims barebone via twrp, or else first flash stock recovery and thn adb sideload firmware
and did you reported this at his thread??
say99 said:
flash prims barebone via twrp, or else first flash stock recovery and thn adb sideload firmware
and did you reported this at his thread??
Click to expand...
Click to collapse
yes i did, but i was kicked out of the thread...
trying it now..let me see if your suggestion works...
carnby24 said:
yes i did, but i was kicked out of the thread...
Click to expand...
Click to collapse
weird I didnt see anyone else complaining such things, and yes it will work so relax
Hi, seems the same..i can only restore if i uncheck system from the list of backup options. But fast charge and mtp and otg function all doesnt seem to work.
Sent from my ASUS_Z00AD using Tapatalk
I miss my fast charge and adb function..please help guys..
Sent from my ASUS_Z00AD using Tapatalk
Reflash the latest rom v1.1 , hopefully everything will work fine then
anyone know whats the reason for this??
unmount system before flashinh prism barebone, you wont get error if you unmount system
serhangelgor said:
unmount system before flashinh prism barebone, you wont get error if you unmount system
Click to expand...
Click to collapse
is this the same if i want to flash stock?
carnby24 said:
is this the same if i want to flash stock?
Click to expand...
Click to collapse
didnt tried on stoct, idk
Guys! Is there any chance my problem (http://forum.xda-developers.com/zenfone2/help/asus-zenfone-2-recognized-pc-t3294980) is related with this issue?
Reflashing stock recovery could help? I´m afraid to do it and not be able to recover any thing else or get stuck on boot without usb connection.
Another question: This might be related to kernel? i´m using BitOkObssesion
I am not sure what went wrong on your side. But i flashed the kernel on a phone of a friend and he has no issues at all.
Did you try to download again ? Maybe a bad download..
Sometimes it happens
carnby24 said:
Hi all,
My zenfone 2 just got messed up after flashing the echoe kernel.
Rom was fine, but the kernel messed everything up. At first the fast charging went missing and the mtp didnt fucntion, also usb otg cannot be detected.
so started my twrp and wanted to flash stock 160 fw. i keep getting the error below;
E:extractTarfork() process ended with error = 255.
I have tried sideload but again, pc doesnt detect my zenfone 2.
Please help...want to go back to stock rooted.
Click to expand...
Click to collapse
Every ROM developer or Kernel developer spent a lot of his time on making better experience for user
i personally have my own ROM and i did try Echoe ROM & AEL Kernel because its from Awesome Developer and everyone loves him and he's kind to everyone
many users used his ROMs and Kernels and never experience hardware or software problems because he checks every single detail of his work
all problems that you mentioned cause by Asus and many users sent their devices to service center, so please dont blame anyone about
something they did do and research next time before post something similar
im still using AEL Kernel without any problems
BTW
TWRP backup is broken for our device, Reboot again to recovery and dont select Data or Cache in Restore options
and check this post
Wow..thanks..will try it...thanks..didnt know..cos before this used to select all data and cache..no problem..
carnby24 said:
Wow..thanks..will try it...thanks..didnt know..cos before this used to select all data and cache..no problem..
Click to expand...
Click to collapse
Good luck with it
and for adb and mtp, did you tried other pc ?
or other cable ?
if its the same then its from Asus :crying:
can you please remove "echoe kernel" from thread title and from the thread also ?
But what about the MTP function and fast charing? Doesnt seem to work now.Tried all other PC and cables as well. Still the same.
AL_IRAQI, so you´re saying thats a hardware related issue? i´m asking because i got the same issue but with another rom...
tried different cables different pcs and nothing
carnby24 said:
But what about the MTP function and fast charing? Doesnt seem to work now.Tried all other PC and cables as well. Still the same.
Click to expand...
Click to collapse
Restore Stock and go to Asus service center, Asus messed up these things in latest update