Hey guys, my phone laggs after fota update -.- (xxkk5)
S8600XXKJC/S8600DBTKJ4 is listed at Sammobile, but N/A (404 Not Found).
Does anybody has the files of this FW?
Thanx a lot
S800XXKJC
if you've already found you can tell me where?
Here it is if you need:
badawiki.org/wiki/doku.php?id=wiki:firmware_s8500
Hello, here:
http://ulozto.cz/xP4XcXz/s8600xxkjc-s8600dbtkj4-zip
Regards
I'm looking for the firmware (or similar DBT version) too, all links are dead.
Thanks for uploading.
Related
The original link has been removed from samfirmware.com , but managed to find it on a Persian website , all the thanks goes to www.dl-hamrah.ir website
download link:
http://hotfile.com/dl/118677024/f842e2e/P1010JPKC4.zip.html
i flashed mine with only two files ;
GT-P1010-MULTI-CSC-OJPKC4.tar in the CSC
&
P1010JPKC4-REV03-ALL-low-CL973422.tar in the PDA
there is another file in the rar file , i did not used , and it worked for me , even without any .PIT files nor re partition
Update ; incase you tried the above and you got failed , use the attached PIT file with repartion
froyo or gingerbread?
which one is newer P1010JPKC6 or that?
numb_heart666 said:
froyo or gingerbread?
which one is newer P1010JPKC6 or that?
Click to expand...
Click to collapse
+1
.............
It is froyo and it is the only available version.
As mentioned above I posted it cause it is no longer available on samfirmware.com
Does anyone else the OP had luck with this firmware?
My p1010 has a KB6 FW and i´m thinking in try this one.
Thanks.
CreativeBR
Can someone give me a link to OXA S8530XXJKA (DBT) full firmware for S8530 Wave 2...
I want to flash my phone and try to update with KIES....
thanks in advance....
theconqueror said:
Can someone give me a link to OXA S8530XXJKA (DBT) full firmware for S8530 Wave 2...
I want to flash my phone and try to update with KIES....
thanks in advance....
Click to expand...
Click to collapse
Did you try http://hotfile.com/dl/99644499/83fa601/S8530XXJKA.rar.html ? I'm downloading it too and will report back how it works (want to switch back to 1.2 so that I can continue developing under 1.x now that it has turned out there is no way of installing Bada 2.0 apps using current unofficial firmwares)
There's also a list of these firmwares at http://www.worcesterdwi.com/thread-145-1-1.html but they're all hacked / enhanced. I'll test them too.
Sucseed....
I downloaded the firmware from Samfirmware....
I flashed my phone....
After I connect it to KIES.....
KIES updated my phone to the latest version....
S8530XXJKA CSC_S8530_Open_Europe_Common_OXA_XXJK7
Now the firmware is
S8530XXKF1/S8530OXAKD7(DBT)
try it but change the product code to.... DBT
Menneisyys said:
Did you try http://hotfile.com/dl/99644499/83fa601/S8530XXJKA.rar.html ? I'm downloading it too and will report back how it works
Click to expand...
Click to collapse
Downloaded and have been trying to flash, back from XPKH3. So far, without any success.
- If I try to flash with the bundled MultiLoader version 2.62, it reports and error right at the beginning, right after (successfully) transferring the bootloader, upon trying to delete the old bootloader.
- If I try to flash with the latest (2.65) MultiLoader version, everything seems to be all right; however, after the flashing and restarting the phone, what I get is the usual connect screen with the exclamation mark. From there, I can only switch to download mode again, but nothing else.
Flashing back to the latest 2.0 XPKH3 (with 2.65, of course) always works.
I'll soon try flashing with 2.62 without overwriting the bootloader (that is, removing the checkmark from the first checkbox) to see what happens as it's at erasing the bootloader that 2.62 fails.
try this...
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
theconqueror said:
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
Click to expand...
Click to collapse
Thanks... you meant http://www.samfirmware.com/WEBPROTECT-s8530.htm . Just giving a try to the version there; hope I'll have better luck
theconqueror said:
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
Click to expand...
Click to collapse
Thanks again. I've found out what I've done wrong: I've forgotten to check in the "Boot Change" (first) checkbox. When checking it in, with all the firmware versions (S8530XXJKA.rar I've linked to above; GT-S8530_XEF_S8530XXKF1_S8530OXAKD7.rar linked from the SamFirmware repo as the latest (June 2011) 1.2 firmware; even hacked ones with call recording, that is, S8530XXJKA_FULL_Custom_SHP_CR_1.0b_sYCO.rar ) I've thrown it at, it worked just fine.
I've used ML 2.65 for flashing all the time. Haven't tested 2.62 this time.
Good news...
Happy for you...
Hello all,
links in previous posts are dead.
Can any of you post this file (previous 1.x version of bada, europeean or french XEF release).
Purpose is also downgrading and upgrade tests via Kies.
Best regards,
Fred
Hi ! I finally find a ROM on the internet.
Thanks
Seems online...
Someone found an Link.
Thanx.
Best Regards
http://hotfile.com/dl/135201469/4dcef4d/S7250DJPKJ3_S7250DOJPKJ1_OJP.rar.html
this firmware is very small in size (182.5mb) don't u think
S7250DJPKK1_S7250DOJPKK1
Available.
Best Regards
It seems soon or yet available on market...
Maybe if official available somewhere, someone could please post Firmwareversion. So we could check FUS for updates.
Thanx in advance.
Best Regards
Today found in market and short checked...
Retail Version...
S7250XXKJ7
S7250OXAKJ7
But I can't find on FUS...
Best Regards
Edit 1.
Found post about Kies update to S7250XXKK1...
But again no Product Code yet...
Edit 2.
Product Code: GT-S7250MSADBT
Latest firmware: S7250XXKK1/S7250OXAKK1
Modified: 30.11.2011 16:11:19
Filename: GT-S7250_DBT_1_20111130161113.enc3.zip
But I can't download yet...
Edit 3.
I have it now, but still enc3 no decrypt Algo known...
h t t p:// img14.imageshack.us /img14/1694/s7250.png
Cant do anythin with the handset until there is a firmware update.
-which means bugs as im running a testing firmware
-cannot access the apps market and download
-etc
Hello, if I'm right. I can see XXKFE/OXAKFE on Screenshot.
Please be carefully. Sometime Prototypes not the same like Retail...
to prevent damage...
Other problem, also retail is new... nowhwere read about successfully update...
See here:
http://www.sammobile.com/forum/showthread.php?t=1844&page=3&p=15695#post15695
Wait... if Service manual is availabe, we can see what to choose in Multiloader...
Best Regards
Hi Folks,
I try to download the Australian/Testra CSC/Modem from this site: http://forum.xda-developers.com/showthread.php?t=2031575
but I'm not able to do so, it says always "downloadfile unknown"
In fact all of these modems in this group (made by scarecrow2012) aren't downloadable...all others work fine...
Are there other links to this file ? I tried to google it, but no luck..
Thanks for your help...
Hi all, I'm new here, which probably explains my problem. I tried flashing my watch for the first time in an attempt to change the CSC, but now it's not working properly. The screen is always on displaying developer information and the whole interface has changed.
I can still get to the download wirelessly option, and as I understand it to restore it I would need the latest firmware for the R800 and flash via Odin.
If anyone has these files and any tips or instructions to get it back to normal I would very much appreciate it.
Thanks.
Meanwhile managed?
Latest SM-R800 Firmware is DSL1... and you can find it here:
https://forum.xda-developers.com/showpost.php?p=81261659&postcount=133
Older Firmware for Downgrade is here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-gw-r800-t3936370
IMHO you flashed Combination Firmware...
No idea why nor what you are trying to achieve...
netOdin + Infos + Videos:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Be carefully.
Ever read twice... try to look with open eyes... to prevent to flash wrong files...
Best Regards
adfree said:
Meanwhile managed?
Latest SM-R800 Firmware is DSL1... and you can find it here:
https://forum.xda-developers.com/showpost.php?p=81261659&postcount=133
Older Firmware for Downgrade is here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-gw-r800-t3936370
IMHO you flashed Combination Firmware...
No idea why nor what you are trying to achieve...
netOdin + Infos + Videos:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Be carefully.
Ever read twice... try to look with open eyes... to prevent to flash wrong files...
Best Regards
Click to expand...
Click to collapse
Thank you very much this was a big help, I managed to use Odin to flash the software and now its how it was before I started messing around with it. Won't be doing that again!
do you have R805USQU1CSL2 odin firmware?
adfree said:
Meanwhile managed?
Latest SM-R800 Firmware is DSL1... and you can find it here:
https://forum.xda-developers.com/showpost.php?p=81261659&postcount=133
Older Firmware for Downgrade is here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-gw-r800-t3936370
IMHO you flashed Combination Firmware...
No idea why nor what you are trying to achieve...
netOdin + Infos + Videos:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Be carefully.
Ever read twice... try to look with open eyes... to prevent to flash wrong files...
Best Regards
Click to expand...
Click to collapse