Related
Please Read this first => http://forum.xda-developers.com/showthread.php?t=888071
Firmware info from Check Fus
Modified: 11/01/14
Latest firmware for: THL
PDA: P1000DXKM2
Phone: P1000DXJM2
CSC: P1000OLBJM2
Decrypt Code: 3899029
Url: http://fus.samsungmobile.com/Phone_...00OLBJM3_P1000DXJM3_P1000DXKM3_DX_THL.zip.enc
still 2.2
kernel 2.6.32.9 [email protected]#1
my tab was All Signed. I can flash JME to This firmware. No need to wipe. Odin 1.7 flashed only PDA and Manually reboot with Power+up.
it's smooth so far.
Is this for general Asia Pacific region or only for Thailand?
What's the decryption code for the enc file?
I am currently using DXJM4 version, but go through Kies, no updates available. Very weired.
it's asia version not only thailand , it think euro can use it as well because mine can use euro firmware version.
decrypt code, you can see above. try to look at it again.
anyway after I use Odin to flash,it can't update via kies anymore. normally kies firmware will roll up after fus in a few day or longer.
We need Roto to makes his version of this...im sure he will soon.
Are this Rom a multi, pls ?
Thanks
Sent from my GT-P1000 using Tapatalk
how to unpack this file?
Any additional changes with the firmware? Extra apps/settings?
Sent from my GT-P1000 using XDA App
IF YOUR BOOT IS STILL UNSIGNED , DO NOT FLASH SBL AND BOOT FROM THIS ROM.
It is very solid build. very smooth and browser seems to be smoother, scrolls better even when pages are still loading.
No extra apps.
Unlike KA build , kernel is signed so it can loaded if u have signed bootloader (jm*)
Very few locales, just english uk, english na and some asian.
You can repack it without sbl and boot files and flash on the top of the signed roms.
rmanaudio said:
We need Roto to makes his version of this...im sure he will soon.
Click to expand...
Click to collapse
I'd like to. I have family events to attend to tomorrow, but if someone would post an unencoded firmware for download, Ill grab it and apply all the JME mods to it. In the meantime, feed back on KM2's quality is valuable. I'd hate to waste time on it just to go back to JME
rotohammer said:
I'd like to. I have family events to attend to tomorrow, but if someone would post an unencoded firmware for download, Ill grab it and apply all the JME mods to it. In the meantime, feed back on KM2's quality is valuable. I'd hate to waste time on it just to go back to JME
Click to expand...
Click to collapse
Understandable....samfirmware release a bunch...all at the same time. JMF also release...so i would say it is the same as KM2 but for europe!
I have been trying to download it from samfirmware and decode it...but the site is not working.
Do not flash jmf
rmanaudio said:
Understandable....samfirmware release a bunch...all at the same time. JMF also release......
.
Click to expand...
Click to collapse
Guys...I just downloaded JMF and unless you can understand Russian - You cannot get back.
The moment the phone boots, it's all Russian (or greek, or something!)
I was listed under the EURO rom, i DOwnloaded and Odin it..... but I cannot get the language to go English.
I tried to go to Locale to change it to English - but Have no idea where I am.
I tried to flash JME back, but the tab still boots up in Russian.
How can I get it back to JME?
Out of frustration I flashed the JME pit file, but not difference, still Russian.
I'm stuck
Someone have any idea?....LOL
Thanks
Don't flash KM2 either.
KM2 only includes english (UK, US), Bahasa (Indonesia, Malaysia) Ting Viet and other asian locales
Font seems to be a bit thinner - looks good!
browser still laggy with blank pages after a second site is opened
Readers Hub is back
still no 2.2.1 or even 2.3...
Build number: FROYO.DXKM2
Dennis
Sorry Guys.....
STUPID, STUPIP...STUPID....
Man I feel like an IDioT.......DUH!
I got so excited and panicked when I noticed this STRANGE language on my TAB. I did Managed to fix the language in Local & Text, top option and scrolled down to English!
WHOALA - JMF works just time.
Still 2.2 though....
(did you guys see Sammy have announced the Tab 2!, dual processors,etc. I guess now we will NEVER see the "official 2.3 nor 3.0"!!!!)
bert269 said:
STUPID, STUPIP...STUPID....
(did you guys see Sammy have announced the Tab 2!, dual processors,etc. I guess now we will NEVER see the "official 2.3 nor 3.0"!!!!)
Click to expand...
Click to collapse
Pretty sure they havent announced it yet, they said they were goin to show it off in MWC, probably wont be released by may-june, by then we will have cyanogen mod honey comb on this thing
One mre question, does it have Chinese language option?
Sent from my GT-P1000 using XDA App
dahuzi said:
One mre question, does it have Chinese language option?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
I captured screen for you.
one more thing,I don't know where to upload 3xxMB decrypted firmware , it's too big and my upload is just only 512kbps.
and I think decrypt and unzip,it's less than 5 minutes for me. or someone can help for this.
anyway, you should wait for .apk unprotect signed from roto/chainfire and flash other firmware that isn't signed.
u3819013 said:
I captured screen for you.
one more thing,I don't know where to upload 3xxMB decrypted firmware , it's too big and my upload is just only 512kbps.
and I think decrypt and unzip,it's less than 5 minutes for me. or someone can help for this.
anyway, you should wait for .apk unprotect signed from roto/chainfire and flash other firmware that isn't signed.
Click to expand...
Click to collapse
Thanks, I will sure to download and upgrade my current DXJM4.
I downloaded firmware and it's .ecn. I can't rename file type to .zip. What can I do with it?
Samfirmware.com has this version without encrypted code.
Anyway, how could we flash this firmware without boot.bin, Sbl.bin, zImage.
As long as Roto puts his hand on this firmware. I wont dare to flash to my GT.
FYI
KChauJen said:
Samfirmware.com has this version without encrypted code.
Anyway, how could we flash this firmware without boot.bin, Sbl.bin, zImage.
As long as Roto puts his hand on this firmware. I wont dare to flash to my GT.
FYI
Click to expand...
Click to collapse
Why is everyone depending on Rotohammer? Open it up with 7zip or similar, delete the offending stuff (sbl, boot, zImage) ...whatever and then flash it. Simple.
Sent from my GT-P1000 using Tapatalk
A new day and a new headache made by me
Today's question is : is it possible to make a full fw from upgrade fw???
two days ago i ripped a non-full firmware from kies now i want to make it full
but i wanted to get confirmation from XDA-developers that this is possible
can i just add the missing files from prior fw to the new one and it will be a full one??
i am talking about a full 1.02 to complete a non-full 1.2
thanks in advance
ps: i don't have thanks today so no one get angry from me
i am no talking about boot files only
i am talking about the whole fw
for ex shppapp file from non-full doesn't have alot of files should i add them simply??
mylove90 said:
i am no talking about boot files only
i am talking about the whole fw
for ex shppapp file from non-full doesn't have alot of files should i add them simply??
Click to expand...
Click to collapse
Bootfiles can be added to non-full firmwares to make it a full firmware. I have tried that myself. But adding ShpApp to the non-full firmwares won't work. You will end up with the facebook, twitter, samsungapps, daily briefing and other default apps not working. If you really want the older ShpApp files, you may want to modify the non-full firmware's registry to include the apps present in the ShpApp file you want.
mylove90 said:
for ex shppapp file from non-full doesn't have alot of files should i add them simply??
Click to expand...
Click to collapse
You may dump all files from full and updated shppapp with powerfull TriX tool, replace are old files to new and combine new full shppapp with files from update.
Thanks to b.kubica and adfree. Link
i know trix and i use it
i was talking about doing what you Xenon but not sure if it will work
waiting for adfree or someone who tried this to confirm it
You just had to take full ShpApp.app from a full version.
Idem for boot files.
No need PFS file.
The files needed are: BOOTFILES, amss.bin, apps_compressed.bin, CSC_S8500_Open_Europe_Common_OXA_XXJL2.csc, FactoryFs_S8500_Open_Europe_Common.ffs, Rsrc_S8500_Open_Europe_Common.rc1, Rsrc2_S8500_Open_Euro_Common(Low).rc2, ShpAppHD.app (this one need to be replaced by ShpApp.app)
ok so i'll tell you what i understood
Boot files (from old fw)
amss.bin (new fw)
apps_compressed.bin (new fw)
Factoryfs.ffs (old fw as it is not present in new one)
ShpApp.app (old fw)
RSRC1.rc1 (new fw)
RSRC2.rc2 (new fw)
CSC.csc (new fw)
PFS.pfs (don't know and think it is not necessary at all but present in new fw)
Yes you are right.
But generaly FFS is present in update firmware.
Wich firmware are you talking about?
ok
if you noticed i am from Egypt so it is a middle east fw update from 1.02 to 1.2
its code name S8500JPKC1
the ffs is from the full fw
i tried what you said lasentenza and ended up with non-working facebook,twitter,youtube(makes the phone restart),samsung apps,sms app(makes the phone restart also)
i think the problem is not that simple
guys is ther any 1.2 region free firmware out ? if yes then please give me the link to download it
thanx in advance
what do you mean with "region free"???
i live in india and the 1.2 firmware is not avail here
what is the code of your firmware???
is your firmware belongs to Africa and middle east??
ok so i'll tell you what i understood
Boot files (from old fw)
amss.bin (new fw)
apps_compressed.bin (new fw)
Factoryfs.ffs (old fw as it is not present in new one)
ShpApp.app (old fw)
RSRC1.rc1 (new fw)
RSRC2.rc2 (new fw)
CSC.csc (new fw)
PFS.pfs (don't know and think it is not necessary at all but present in new fw)
Click to expand...
Click to collapse
Depend on your goal... as repair solution?
Factoryfs.ffs is mandatory if you erase with Multiloader the FFS... as it contain important Security folder with all Certs...
Sometimes Operator related Certs included... Yes, you could try other FFS from your Product Code. No guarantee that it work 100 % without sideeffects. As sometimes minor changes... Same for ShpApp.app. Older stuff can work, but have to be tested...
Maybe post please exact filenames. Sometimes same files are used in other Firmware Brandings...
Best Regards
What you need is a Indian CSC file. Just replace the CSC file in the firmware with the one I in an Indian 1.0.2 or 1.0 firmwares available at samfirmware.com. Like DDJI2 or DDJK1. Then in keypad type "*#5239870*#". Then choose pre-configuration. Then in the code box enter the following code: *#27236*# and then press done. Then choose INU which is for Indian region. NOTE: Remove sim card and memory card and backup all data before doing this. This procedure will reset whole phone.
Now you will get all default Indian sim card settings and other Indian settings.
mylove90 said:
i tried what you said lasentenza and ended up with non-working facebook,twitter,youtube(makes the phone restart),samsung apps,sms app(makes the phone restart also)
i think the problem is not that simple
Click to expand...
Click to collapse
It won't work it the update firmware does not contains FFS file.
You can't take one from other firmware I think
carbonbadu said:
i live in india and the 1.2 firmware is not avail here
Click to expand...
Click to collapse
Word on twitter today is that India is getting 1.2 by the end of next week.
throughtheblack said:
Word on twitter today is that India is getting 1.2 by the end of next week.
Click to expand...
Click to collapse
Was it posted by samsung apps or samsung bada on twitter?
astrotom said:
Was it posted by samsung apps or samsung bada on twitter?
Click to expand...
Click to collapse
Samsungbada
"The 1.2 upgrade in india. will be available in late April, You can use Kies to upgrade ur Wave by end of next week "
Is it possible to flash the input method that I wanted (e.g. Chinese input) from a Chinese enabled firmware (e.g. ZAKA1) to the JL2 firmware?
Euhmmm as far as i understand you want chinese text and input on for example JL2. Well I'm not 100% sure. You could try flashing chinese CSC (make sure the versions are the same.. flasing a 1.0.2 CSC on 1.2 won't do a great job) to the JL2 firmware.. if that doesnt work out good you can always flash back to your origional FW but as far as I know the latest one (XXKF2) supports chinese INPUT (not sure about screen text) but i can select it
So the input method lays inside the CSC file? Let me try to flash the one from KF2 or from other 1.2 and report later
NitramNach said:
So the input method lays inside the CSC file? Let me try to flash the one from KF2 or from other 1.2 and report later
Click to expand...
Click to collapse
If you read my entire post .
I said you could aslo try flashing the normal XXKF1 First.. Because it already has chinese input.
ShadowAS1 said:
If you read my entire post .
I said you could aslo try flashing the normal XXKF1 First.. Because it already has chinese input.
Click to expand...
Click to collapse
I've tried to flash the CSC file from DXKE1 but the input methods were still from XXJL2.
But itsn't the XXKF1 for Europe? Surprise it contains chinese input.... anyway, downloading it from samfirmware.com
Can someone give me a link to OXA S8530XXJKA (DBT) full firmware for S8530 Wave 2...
I want to flash my phone and try to update with KIES....
thanks in advance....
theconqueror said:
Can someone give me a link to OXA S8530XXJKA (DBT) full firmware for S8530 Wave 2...
I want to flash my phone and try to update with KIES....
thanks in advance....
Click to expand...
Click to collapse
Did you try http://hotfile.com/dl/99644499/83fa601/S8530XXJKA.rar.html ? I'm downloading it too and will report back how it works (want to switch back to 1.2 so that I can continue developing under 1.x now that it has turned out there is no way of installing Bada 2.0 apps using current unofficial firmwares)
There's also a list of these firmwares at http://www.worcesterdwi.com/thread-145-1-1.html but they're all hacked / enhanced. I'll test them too.
Sucseed....
I downloaded the firmware from Samfirmware....
I flashed my phone....
After I connect it to KIES.....
KIES updated my phone to the latest version....
S8530XXJKA CSC_S8530_Open_Europe_Common_OXA_XXJK7
Now the firmware is
S8530XXKF1/S8530OXAKD7(DBT)
try it but change the product code to.... DBT
Menneisyys said:
Did you try http://hotfile.com/dl/99644499/83fa601/S8530XXJKA.rar.html ? I'm downloading it too and will report back how it works
Click to expand...
Click to collapse
Downloaded and have been trying to flash, back from XPKH3. So far, without any success.
- If I try to flash with the bundled MultiLoader version 2.62, it reports and error right at the beginning, right after (successfully) transferring the bootloader, upon trying to delete the old bootloader.
- If I try to flash with the latest (2.65) MultiLoader version, everything seems to be all right; however, after the flashing and restarting the phone, what I get is the usual connect screen with the exclamation mark. From there, I can only switch to download mode again, but nothing else.
Flashing back to the latest 2.0 XPKH3 (with 2.65, of course) always works.
I'll soon try flashing with 2.62 without overwriting the bootloader (that is, removing the checkmark from the first checkbox) to see what happens as it's at erasing the bootloader that 2.62 fails.
try this...
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
theconqueror said:
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
Click to expand...
Click to collapse
Thanks... you meant http://www.samfirmware.com/WEBPROTECT-s8530.htm . Just giving a try to the version there; hope I'll have better luck
theconqueror said:
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
Click to expand...
Click to collapse
Thanks again. I've found out what I've done wrong: I've forgotten to check in the "Boot Change" (first) checkbox. When checking it in, with all the firmware versions (S8530XXJKA.rar I've linked to above; GT-S8530_XEF_S8530XXKF1_S8530OXAKD7.rar linked from the SamFirmware repo as the latest (June 2011) 1.2 firmware; even hacked ones with call recording, that is, S8530XXJKA_FULL_Custom_SHP_CR_1.0b_sYCO.rar ) I've thrown it at, it worked just fine.
I've used ML 2.65 for flashing all the time. Haven't tested 2.62 this time.
Good news...
Happy for you...
Hello all,
links in previous posts are dead.
Can any of you post this file (previous 1.x version of bada, europeean or french XEF release).
Purpose is also downgrading and upgrade tests via Kies.
Best regards,
Fred
Hi ! I finally find a ROM on the internet.
Thanks
i want to go back 2.0 to 1.2 !! that 2.0 version is my battery too much draining and heating it's'n't enough battery ..
i want to go back to 1.2 version
i'm trying to download hotfile server but it's server down
anyone have pls share :crying:
that file name is
CSC_S8530_India_ODD.csc
Need urgently .......waiting
S8530ddkb2
On badaforums.net your file is called:
S8530DDKB2 ## 1.2 CSC_S8530_India_ODD.csc 2011 February
Can be found here:
zip on 4shared
or here:
rar on depositfiles
I want samsung official firmware for GT-S8600
Hello Guys,
Can i get Samsung Firmware for Wave 3 S8600 for INDIA.
I have tried many links but cannot find a working link to download.
Thanks...
sammobile firmware
The downloads on sammobile.com are working for S8600, Indian too.
You have to sign up to get download links.
Thanks... now works Perfect
2nd link have password
but 1st link is fine
thanks a lot !!
password
Sorry, forgot to mention
The password for second link (dpositfiles) is samfirmware.com
So, this must be a sammobile file reupload :good: