Related
Please Read this first => http://forum.xda-developers.com/showthread.php?t=888071
Firmware info from Check Fus
Modified: 11/01/14
Latest firmware for: THL
PDA: P1000DXKM2
Phone: P1000DXJM2
CSC: P1000OLBJM2
Decrypt Code: 3899029
Url: http://fus.samsungmobile.com/Phone_...00OLBJM3_P1000DXJM3_P1000DXKM3_DX_THL.zip.enc
still 2.2
kernel 2.6.32.9 [email protected]#1
my tab was All Signed. I can flash JME to This firmware. No need to wipe. Odin 1.7 flashed only PDA and Manually reboot with Power+up.
it's smooth so far.
Is this for general Asia Pacific region or only for Thailand?
What's the decryption code for the enc file?
I am currently using DXJM4 version, but go through Kies, no updates available. Very weired.
it's asia version not only thailand , it think euro can use it as well because mine can use euro firmware version.
decrypt code, you can see above. try to look at it again.
anyway after I use Odin to flash,it can't update via kies anymore. normally kies firmware will roll up after fus in a few day or longer.
We need Roto to makes his version of this...im sure he will soon.
Are this Rom a multi, pls ?
Thanks
Sent from my GT-P1000 using Tapatalk
how to unpack this file?
Any additional changes with the firmware? Extra apps/settings?
Sent from my GT-P1000 using XDA App
IF YOUR BOOT IS STILL UNSIGNED , DO NOT FLASH SBL AND BOOT FROM THIS ROM.
It is very solid build. very smooth and browser seems to be smoother, scrolls better even when pages are still loading.
No extra apps.
Unlike KA build , kernel is signed so it can loaded if u have signed bootloader (jm*)
Very few locales, just english uk, english na and some asian.
You can repack it without sbl and boot files and flash on the top of the signed roms.
rmanaudio said:
We need Roto to makes his version of this...im sure he will soon.
Click to expand...
Click to collapse
I'd like to. I have family events to attend to tomorrow, but if someone would post an unencoded firmware for download, Ill grab it and apply all the JME mods to it. In the meantime, feed back on KM2's quality is valuable. I'd hate to waste time on it just to go back to JME
rotohammer said:
I'd like to. I have family events to attend to tomorrow, but if someone would post an unencoded firmware for download, Ill grab it and apply all the JME mods to it. In the meantime, feed back on KM2's quality is valuable. I'd hate to waste time on it just to go back to JME
Click to expand...
Click to collapse
Understandable....samfirmware release a bunch...all at the same time. JMF also release...so i would say it is the same as KM2 but for europe!
I have been trying to download it from samfirmware and decode it...but the site is not working.
Do not flash jmf
rmanaudio said:
Understandable....samfirmware release a bunch...all at the same time. JMF also release......
.
Click to expand...
Click to collapse
Guys...I just downloaded JMF and unless you can understand Russian - You cannot get back.
The moment the phone boots, it's all Russian (or greek, or something!)
I was listed under the EURO rom, i DOwnloaded and Odin it..... but I cannot get the language to go English.
I tried to go to Locale to change it to English - but Have no idea where I am.
I tried to flash JME back, but the tab still boots up in Russian.
How can I get it back to JME?
Out of frustration I flashed the JME pit file, but not difference, still Russian.
I'm stuck
Someone have any idea?....LOL
Thanks
Don't flash KM2 either.
KM2 only includes english (UK, US), Bahasa (Indonesia, Malaysia) Ting Viet and other asian locales
Font seems to be a bit thinner - looks good!
browser still laggy with blank pages after a second site is opened
Readers Hub is back
still no 2.2.1 or even 2.3...
Build number: FROYO.DXKM2
Dennis
Sorry Guys.....
STUPID, STUPIP...STUPID....
Man I feel like an IDioT.......DUH!
I got so excited and panicked when I noticed this STRANGE language on my TAB. I did Managed to fix the language in Local & Text, top option and scrolled down to English!
WHOALA - JMF works just time.
Still 2.2 though....
(did you guys see Sammy have announced the Tab 2!, dual processors,etc. I guess now we will NEVER see the "official 2.3 nor 3.0"!!!!)
bert269 said:
STUPID, STUPIP...STUPID....
(did you guys see Sammy have announced the Tab 2!, dual processors,etc. I guess now we will NEVER see the "official 2.3 nor 3.0"!!!!)
Click to expand...
Click to collapse
Pretty sure they havent announced it yet, they said they were goin to show it off in MWC, probably wont be released by may-june, by then we will have cyanogen mod honey comb on this thing
One mre question, does it have Chinese language option?
Sent from my GT-P1000 using XDA App
dahuzi said:
One mre question, does it have Chinese language option?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
I captured screen for you.
one more thing,I don't know where to upload 3xxMB decrypted firmware , it's too big and my upload is just only 512kbps.
and I think decrypt and unzip,it's less than 5 minutes for me. or someone can help for this.
anyway, you should wait for .apk unprotect signed from roto/chainfire and flash other firmware that isn't signed.
u3819013 said:
I captured screen for you.
one more thing,I don't know where to upload 3xxMB decrypted firmware , it's too big and my upload is just only 512kbps.
and I think decrypt and unzip,it's less than 5 minutes for me. or someone can help for this.
anyway, you should wait for .apk unprotect signed from roto/chainfire and flash other firmware that isn't signed.
Click to expand...
Click to collapse
Thanks, I will sure to download and upgrade my current DXJM4.
I downloaded firmware and it's .ecn. I can't rename file type to .zip. What can I do with it?
Samfirmware.com has this version without encrypted code.
Anyway, how could we flash this firmware without boot.bin, Sbl.bin, zImage.
As long as Roto puts his hand on this firmware. I wont dare to flash to my GT.
FYI
KChauJen said:
Samfirmware.com has this version without encrypted code.
Anyway, how could we flash this firmware without boot.bin, Sbl.bin, zImage.
As long as Roto puts his hand on this firmware. I wont dare to flash to my GT.
FYI
Click to expand...
Click to collapse
Why is everyone depending on Rotohammer? Open it up with 7zip or similar, delete the offending stuff (sbl, boot, zImage) ...whatever and then flash it. Simple.
Sent from my GT-P1000 using Tapatalk
Heres a heavily modified KM2 firmware. This wasn't easy.
In a nutshell its JME-v4 without the modified Swype.
All the files are here:
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/KM2/
Please backup your apps and settings with Titanium Backup from the market.
Write down ALL your current APN settings in Settings/Wireless/Mobile/Access Point Names/, the one with the green dot next to it. There is 14 settings in all.
Its a first release. Use the upgrade if coming from Roto-JME. You can always go back to JME as well after testing.
Then Ill collect suggestions/tweaks for v2.
Thanks
Still enjoying the jme v4, but i wanna try this one..Thank you.
I used Titanium, backed up apps and user data separately, then using Odin3 1.7, in PDA went Roto-KM2-Upgrade-v1.tar, and the Addon-KM2-Modem.tar in the Phone. Everything else blank, no check in re-partion, start. 3:33 Pass! Long time restarting, on Samsung screen a while, then everything back to normal, everything working.
Thank you Roto for your time and energy for us. You are a true gentleman!
Edit: What's with that Panzer Panic?!
Km2 Modem
Just to clear, as im using a samsung tab from tmobile, the only connection i can get is the edge, no 3g or h.
This KM2 modem gives EDGE and voice. Hop on over to the Roto Modem Switcher thread and get the Roto-3G modem if you want 3g/H. Follow the steps to get both. T-Mo tab user here too. The switcher script works fine, and overwrites this KM2 modem.
If you already have a 3G/H modem, flash the upgrade leaving the Phone button blank.
rangercaptain said:
This KM2 modem gives EDGE and voice. Hop on over to the Roto Modem Switcher thread and get the Roto-3G modem if you want 3g/H. Follow the steps to get both. T-Mo tab user here too. The switcher script works fine, and overwrites this KM2 modem.
If you already have a 3G/H modem, flash the upgrade leaving the Phone button blank.
Click to expand...
Click to collapse
Thanks..got ya.
Quick Flashing Directions
Sorry new to the Tab but have been flashing my HD2 for a long time. I looked at the old guide posted the JME4 thread as a link, but it reference files like P1_Addhddenpit and all I see fter unzipinng the file is the modem and km2.tar. Any help would be greatly appreciated. Don't want to brick my new toy lol
EDIT: OK reread guide and more specifically o I use the PIT file packaged with ODIN3 from the guide? If not where do I get the correct PIT file? I am on a stock TMOUS Tab
Installed KM2 upgrade without any problem. So far everything runs smooth & the modem switcher also works Thank you, Roto !!!
Great to have you back hope your trip went okay!
Sent from my Galaxy Tab
themaster1978 said:
Sorry new to the Tab but have been flashing my HD2 for a long time. I looked at the old guide posted the JME4 thread as a link, but it reference files like P1_Addhddenpit and all I see fter unzipinng the file is the modem and km2.tar. Any help would be greatly appreciated. Don't want to brick my new toy lol
EDIT: OK reread guide and more specifically o I use the PIT file packaged with ODIN3 from the guide? If not where do I get the correct PIT file? I am on a stock TMOUS Tab
Click to expand...
Click to collapse
Read This and you will never lost>>>http://forum.xda-developers.com/showthread.php?t=895827
Flashing question
That is the guide I am talking about. Do I use the PIT file from the MODADROID site under the JME folder?
JeffR714 said:
Great to have you back hope your trip went okay!
Click to expand...
Click to collapse
Wont be back till the end of the month.
rotohammer said:
Wont be back till the end of the month.
Click to expand...
Click to collapse
You deserve the break, and should be relaxing. Not making roms and fixing bootloaders
Off topic...
While your there Rotohammer.
Try this out. been in hungary several times, and this taste great.
url: forums.overclockers.com.au/showthread.php?t=922620
And remember to fill up enough Unicum.
Snowy
Thank you! Rotohammer
Great job!
But I do have questions
Can I use upgrade version if I'm already with official KM2?
And I'm using Swype asian version(I use US English and Thai keypad). Do you have Thai keyboard available in this one?
I really want to use asian Swype with the fullscreen resolution. hehe.....
I wish you have all language available for Swype keyboard in your rom because I'm your real hard fan.
KM2
Can someone tell us a little more about KM2:
1.) European Rom?
2.) Locales included?
3.) collaboration with [CF-Root v2.2]?
4.) Improvements?
Thankx!
Dark-Master said:
But I do have questions
Can I use upgrade version if I'm already with official KM2?
Click to expand...
Click to collapse
yes
Dark-Master said:
And I'm using Swype asian version(I use US English and Thai keypad). Do you have Thai keyboard available in this one?
I really want to use asian Swype with the fullscreen resolution. hehe.....
Click to expand...
Click to collapse
I left the standard Swype installed with the Asian languages. But, the Samsung keyboard has all the combined JME-v languages.
I don't use Swype, so I'm not very interested in hacking it.
rangercaptain said:
Edit: What's with that Panzer Panic?!
Click to expand...
Click to collapse
Actually, I got it to work with stock KM2 for the first time, but as soon as change some files in the file system it starts to FC. I haven't had time to isolate what and why.
SWYPE
rotohammer said:
yes
I left the standard Swype installed with the Asian languages. But, the Samsung keyboard has all the combined JME-v languages.
I don't use Swype, so I'm not very interested in hacking it.
Click to expand...
Click to collapse
Roto,
Are there other languages in Swype ? F.E. POLISH ?
Can anyone send full list of Swype languages ?
What about some changelog in comparation with i.e. JMA(E),thx a lot
A new day and a new headache made by me
Today's question is : is it possible to make a full fw from upgrade fw???
two days ago i ripped a non-full firmware from kies now i want to make it full
but i wanted to get confirmation from XDA-developers that this is possible
can i just add the missing files from prior fw to the new one and it will be a full one??
i am talking about a full 1.02 to complete a non-full 1.2
thanks in advance
ps: i don't have thanks today so no one get angry from me
i am no talking about boot files only
i am talking about the whole fw
for ex shppapp file from non-full doesn't have alot of files should i add them simply??
mylove90 said:
i am no talking about boot files only
i am talking about the whole fw
for ex shppapp file from non-full doesn't have alot of files should i add them simply??
Click to expand...
Click to collapse
Bootfiles can be added to non-full firmwares to make it a full firmware. I have tried that myself. But adding ShpApp to the non-full firmwares won't work. You will end up with the facebook, twitter, samsungapps, daily briefing and other default apps not working. If you really want the older ShpApp files, you may want to modify the non-full firmware's registry to include the apps present in the ShpApp file you want.
mylove90 said:
for ex shppapp file from non-full doesn't have alot of files should i add them simply??
Click to expand...
Click to collapse
You may dump all files from full and updated shppapp with powerfull TriX tool, replace are old files to new and combine new full shppapp with files from update.
Thanks to b.kubica and adfree. Link
i know trix and i use it
i was talking about doing what you Xenon but not sure if it will work
waiting for adfree or someone who tried this to confirm it
You just had to take full ShpApp.app from a full version.
Idem for boot files.
No need PFS file.
The files needed are: BOOTFILES, amss.bin, apps_compressed.bin, CSC_S8500_Open_Europe_Common_OXA_XXJL2.csc, FactoryFs_S8500_Open_Europe_Common.ffs, Rsrc_S8500_Open_Europe_Common.rc1, Rsrc2_S8500_Open_Euro_Common(Low).rc2, ShpAppHD.app (this one need to be replaced by ShpApp.app)
ok so i'll tell you what i understood
Boot files (from old fw)
amss.bin (new fw)
apps_compressed.bin (new fw)
Factoryfs.ffs (old fw as it is not present in new one)
ShpApp.app (old fw)
RSRC1.rc1 (new fw)
RSRC2.rc2 (new fw)
CSC.csc (new fw)
PFS.pfs (don't know and think it is not necessary at all but present in new fw)
Yes you are right.
But generaly FFS is present in update firmware.
Wich firmware are you talking about?
ok
if you noticed i am from Egypt so it is a middle east fw update from 1.02 to 1.2
its code name S8500JPKC1
the ffs is from the full fw
i tried what you said lasentenza and ended up with non-working facebook,twitter,youtube(makes the phone restart),samsung apps,sms app(makes the phone restart also)
i think the problem is not that simple
guys is ther any 1.2 region free firmware out ? if yes then please give me the link to download it
thanx in advance
what do you mean with "region free"???
i live in india and the 1.2 firmware is not avail here
what is the code of your firmware???
is your firmware belongs to Africa and middle east??
ok so i'll tell you what i understood
Boot files (from old fw)
amss.bin (new fw)
apps_compressed.bin (new fw)
Factoryfs.ffs (old fw as it is not present in new one)
ShpApp.app (old fw)
RSRC1.rc1 (new fw)
RSRC2.rc2 (new fw)
CSC.csc (new fw)
PFS.pfs (don't know and think it is not necessary at all but present in new fw)
Click to expand...
Click to collapse
Depend on your goal... as repair solution?
Factoryfs.ffs is mandatory if you erase with Multiloader the FFS... as it contain important Security folder with all Certs...
Sometimes Operator related Certs included... Yes, you could try other FFS from your Product Code. No guarantee that it work 100 % without sideeffects. As sometimes minor changes... Same for ShpApp.app. Older stuff can work, but have to be tested...
Maybe post please exact filenames. Sometimes same files are used in other Firmware Brandings...
Best Regards
What you need is a Indian CSC file. Just replace the CSC file in the firmware with the one I in an Indian 1.0.2 or 1.0 firmwares available at samfirmware.com. Like DDJI2 or DDJK1. Then in keypad type "*#5239870*#". Then choose pre-configuration. Then in the code box enter the following code: *#27236*# and then press done. Then choose INU which is for Indian region. NOTE: Remove sim card and memory card and backup all data before doing this. This procedure will reset whole phone.
Now you will get all default Indian sim card settings and other Indian settings.
mylove90 said:
i tried what you said lasentenza and ended up with non-working facebook,twitter,youtube(makes the phone restart),samsung apps,sms app(makes the phone restart also)
i think the problem is not that simple
Click to expand...
Click to collapse
It won't work it the update firmware does not contains FFS file.
You can't take one from other firmware I think
carbonbadu said:
i live in india and the 1.2 firmware is not avail here
Click to expand...
Click to collapse
Word on twitter today is that India is getting 1.2 by the end of next week.
throughtheblack said:
Word on twitter today is that India is getting 1.2 by the end of next week.
Click to expand...
Click to collapse
Was it posted by samsung apps or samsung bada on twitter?
astrotom said:
Was it posted by samsung apps or samsung bada on twitter?
Click to expand...
Click to collapse
Samsungbada
"The 1.2 upgrade in india. will be available in late April, You can use Kies to upgrade ur Wave by end of next week "
Can someone give me a link to OXA S8530XXJKA (DBT) full firmware for S8530 Wave 2...
I want to flash my phone and try to update with KIES....
thanks in advance....
theconqueror said:
Can someone give me a link to OXA S8530XXJKA (DBT) full firmware for S8530 Wave 2...
I want to flash my phone and try to update with KIES....
thanks in advance....
Click to expand...
Click to collapse
Did you try http://hotfile.com/dl/99644499/83fa601/S8530XXJKA.rar.html ? I'm downloading it too and will report back how it works (want to switch back to 1.2 so that I can continue developing under 1.x now that it has turned out there is no way of installing Bada 2.0 apps using current unofficial firmwares)
There's also a list of these firmwares at http://www.worcesterdwi.com/thread-145-1-1.html but they're all hacked / enhanced. I'll test them too.
Sucseed....
I downloaded the firmware from Samfirmware....
I flashed my phone....
After I connect it to KIES.....
KIES updated my phone to the latest version....
S8530XXJKA CSC_S8530_Open_Europe_Common_OXA_XXJK7
Now the firmware is
S8530XXKF1/S8530OXAKD7(DBT)
try it but change the product code to.... DBT
Menneisyys said:
Did you try http://hotfile.com/dl/99644499/83fa601/S8530XXJKA.rar.html ? I'm downloading it too and will report back how it works
Click to expand...
Click to collapse
Downloaded and have been trying to flash, back from XPKH3. So far, without any success.
- If I try to flash with the bundled MultiLoader version 2.62, it reports and error right at the beginning, right after (successfully) transferring the bootloader, upon trying to delete the old bootloader.
- If I try to flash with the latest (2.65) MultiLoader version, everything seems to be all right; however, after the flashing and restarting the phone, what I get is the usual connect screen with the exclamation mark. From there, I can only switch to download mode again, but nothing else.
Flashing back to the latest 2.0 XPKH3 (with 2.65, of course) always works.
I'll soon try flashing with 2.62 without overwriting the bootloader (that is, removing the checkmark from the first checkbox) to see what happens as it's at erasing the bootloader that 2.62 fails.
try this...
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
theconqueror said:
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
Click to expand...
Click to collapse
Thanks... you meant http://www.samfirmware.com/WEBPROTECT-s8530.htm . Just giving a try to the version there; hope I'll have better luck
theconqueror said:
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
Click to expand...
Click to collapse
Thanks again. I've found out what I've done wrong: I've forgotten to check in the "Boot Change" (first) checkbox. When checking it in, with all the firmware versions (S8530XXJKA.rar I've linked to above; GT-S8530_XEF_S8530XXKF1_S8530OXAKD7.rar linked from the SamFirmware repo as the latest (June 2011) 1.2 firmware; even hacked ones with call recording, that is, S8530XXJKA_FULL_Custom_SHP_CR_1.0b_sYCO.rar ) I've thrown it at, it worked just fine.
I've used ML 2.65 for flashing all the time. Haven't tested 2.62 this time.
Good news...
Happy for you...
Hello all,
links in previous posts are dead.
Can any of you post this file (previous 1.x version of bada, europeean or french XEF release).
Purpose is also downgrading and upgrade tests via Kies.
Best regards,
Fred
Hi ! I finally find a ROM on the internet.
Thanks
Roll up (as of now).. all other threads will be closed! Further discussions here..
http://forum.xda-developers.com/showthread.php?p=23217360#post23217360
http://forum.xda-developers.com/showthread.php?t=1527465
http://forum.xda-developers.com/showthread.php?p=23217421#post23217421
http://forum.xda-developers.com/showthread.php?t=1528224
http://forum.xda-developers.com/showthread.php?t=1528337
Combination - Really2x depends on ur personal taste..now im using hybrid with some mods i made
i really do believe that this would be sticky
http://forum.xda-developers.com/showthread.php?t=1511345
Click to expand...
Click to collapse
for the reason that it has a poll and some already gave their ideas
Who can give me stock rom??because i want to make a rom.If stock rom is format .tar how use this in kitchen?need to change .tar to .zip?
You said in my topic("anyone can give me stock rom") to post here and i posted
So, here are my question about ROM's :
1) What is the real goal of a ROM ? Providing new themes and cool fonts ? Does it improves performance or does it comes with real new fonctionnalities ?
2) I tried some ROM like Hybrid, Sense Aurora.. But after installing them on my phone, the french language (yes, I am ) wasn't available. Should I change CSC after installing a new ROM ?
3) Now a question a bit more technical (I study in computer sciences).. Why a ROM like CyanogenMod need a custom Kernel ?
Thank you in advance
funny95 said:
You said in my topic("anyone can give me stock rom") to post here and i posted
Click to expand...
Click to collapse
i tried to reply to your message but it seem you cant recive messages.
you can get one from here http://forum.xda-developers.com/showthread.php?t=1465800.XXLA2 is the latest european.but kitchen cant decompile these img files.you must use a backup from your rom.thats the way i did it.but also download the firmware from the link igave to take the boot.img from there.
So, here are my question about ROM's :
1) What is the real goal of a ROM ? Providing new themes and cool fonts ? Does it improves performance or does it comes with real new fonctionnalities ?
well on another phone i had before this...
i had csutom settings,,
like management of governors and io...in return both either gives you better response or save battery..
my older phone doesnt support gb or live wallpapers.so after doing a custom rom..i now had that features..
as for the galaxy y..
so far the custom rom are just themed and a2sd support and removed bloatware,,
make your phone fast and lite but still basically is pretty much like the stock roms...
just looks better,functionality,,
naaa,,,long way to go,,
a2sd was just made to work couple of days ago...
no oc,no undervoltage..so nothing much really..
2) I tried some ROM like Hybrid, Sense Aurora.. But after installing them on my phone, the french language (yes, I am ) wasn't available. Should I change CSC after installing a new ROM ?
there are instructions on each rom on how to install,,,
3) Now a question a bit more technical (I study in computer sciences).. Why a ROM like CyanogenMod need a custom Kernel ?
for the above mentioned,,,
cm,,is a very customizable rom itself,,
without the custom kernel,,its just a themed stock rom...
Thank you in advance
Thx @termagazis
funny95 said:
Thx @termagazis
Click to expand...
Click to collapse
...and don't forget to press the thanks button on the ROM topic as well!
Thank you zeusseuz.
But I'm not sure I understand about languages.. All the ROM's comes with their own CSC, specific to the dev, but if I want french language, can I replace manually CSC directory on the ROM by mine which comes from my device to get this languages or it is more complicated ?
Rayn16120 said:
Thank you zeusseuz.
But I'm not sure I understand about languages.. All the ROM's comes with their own CSC, specific to the dev, but if I want french language, can I replace manually CSC directory on the ROM by mine which comes from my device to get this languages or it is more complicated ?
Click to expand...
Click to collapse
not really..
you can get csc pda etc rom samfirmware or sam mobile,,,(please google)all stock roms are there as well..
csc can also be found..
complicated not really..
as long as you know which files are for...
odin basically has labels on em...so just find the file save on pc flash on look for the box in odin that says csc or pda grab the file and click start..and wait...and pray electricity doesnt go bonkers...
letter code guide
Rayn16120 said:
Thank you zeusseuz.
But I'm not sure I understand about languages.. All the ROM's comes with their own CSC, specific to the dev, but if I want french language, can I replace manually CSC directory on the ROM by mine which comes from my device to get this languages or it is more complicated ?
Click to expand...
Click to collapse
Every Stock ROM has 3 parts:
PDA, CSC, Modem
PDA - it is the kernel, Android OS, the user interface, and all the applications
CSC - Carrier Specific Configuration (maybe) - this part has setting for a given provider's setup (Internet access, voicemail numbers, default homepages, sometimes carrier bloatware, etc...)
Modem - this is the phone, wifi, bluetooth, fm radio functionality
The naming convention of a Stock ROM package specifies, which languages, network providers and communication frequencies supported by a given pack.
For example:
S5360XXLA2_S5360OXXLA2_RST_S5360XXLA2_HOME.tar.md5
S5360DXLA1_S5360OLBLA1_S5360DXLA1_HOME.tar.md5
The package name consist of the following parts in order: PDA, CSC, Modem
coding
PDA:
S5360 - implicit, the phone model
XX: landcode - specifies which countries, languages supported by the user interface. In this case XX is multilang european build for countries Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom, languages de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
DX: Indonesia, Malaysia, Philippines, Singapore, Vietnam. Languages: en,id,ms,th,vi,zh(ta)
LA2 - version build identifier: L for 2012, A for January, 2 for second build
CSC:
S5360 - implicit, the phone model
OXX: Multi CSC for several european countries. Included country codes: ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
OLB: Multi CSC for SE Asia. Country codes: GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC XTE
LA2 - build id, same as above
Modem
letter code meaning same as PDA, sometimes the modem is different (older) version as PDA, not all packs have new modem.
So back to your question, If you need french lang support, then you have to choose firmwares in its name "XX" in the PDA version
But replacing CSC will not give you additional lang support.
further references on letter codes:
http://forum.xda-developers.com/showthread.php?t=800257
http://www.sammobile.com/firmware/?page=1&t=1
http://forum.xda-developers.com/showthread.php?t=779580
Thanks dudes, you really helped me. Just a last question, what about custom Rom's ?
Rayn16120 said:
Thanks dudes, you really helped me. Just a last question, what about custom Rom's ?
Click to expand...
Click to collapse
custom roms...allow you to do stuff that normally owukldnt work on stock roms..
Hey devs
Can v hv a custom kernel supporting droidwall?
Thanks a lot, XDA is a great community.
<post deleted>
ronnieryan said:
a CS philosopher?
Click to expand...
Click to collapse
not really..just an airbag...hehehhehe
edit...
the one you quoted are my personal opinions sir..
for me if t he rom doenst have anything else to offer
that the stock cant...its just is a stock rom for me,,,
and aside from termas kernel
Stock ROM
funny95 said:
Who can give me stock rom??because i want to make a rom.If stock rom is format .tar how use this in kitchen?need to change .tar to .zip?
Click to expand...
Click to collapse
You don't need any zip or tar file. Install Root Explorer and then copy system folder to SD card. Then install Terminal emulator and write -
su
dd if=/dev/block/bml7/boot.img of=/sdcard/boot.img
You will get a copy of boot.img in your sdcard
Now connect phone to PC and on desktop make a folder named WORKING_STOCK and copy both, the boot.img and SYSTEM folder from SD card to the folder. This is your Stock ROM
Best Custom Rom
I wanna know which currently available ROM consumes least RAM nd has a decent battery consumption time(& least buggy)? Currently I am using Creed's 2.1.. it's gr8.. bt I donno if it's the best one around regarding my concerns!