hello,
i have a htc desire with froyo 2.2 rooted with unrevoked:
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
after a few month of usage it reboot itself when using, now it won't boot there's a white screen with htc logo on startup...
when i go to the recovery it doesn't work the white screen appear again, so no access to the recovery...
i tried the RUU (.exe) method, i can't install because of windows not found the drivers, same thing after installing htc sync with drivers...
then i tried the PB99IMG.zip method and the result is that i have an error with a " main version is older " i have tried many version 2.29 2.1 .... and i have the same result : main version is older.
so please i need your help, if some one can rescue me thank you...
Have you tried to debug it yet, via adb logcat? At least it will give you an idea what's causing the bootloop.
Sent from my Desire using Tapatalk
thank's for your reply, i didn't tried the adb methode yet because i see that it's so difficult, but i think i'll try it if there is not another solution.
Follow this guide to set up your environment:
http://forum.xda-developers.com/showthread.php?t=502010
Hi all,
I have a big problem with my desire. I was unable to start my desire (S-ON, never rooted) so I have decided to downlod RUU:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
booted in fastboot with vol- + power and ran the above file but the process has failed so I had to reboot and since that moment I don't have fastboot menu anymore and I just see the 4 triangles screen. I can still connect phone to PC (windows 7) and run RUU file but everytime it fails with 152 error and "Radio_V2 Fail-PU" error (I can see the RUU process when I disconnect the USB cable, when I connect the cable again the RUU disappear and I see again the black screen with HTC and 4 triangles). I have also tried RUU_HTC Desire Android 2.3 Upgrade (Gingerbread).exe but no lucks.
Any suggestion on how to get my desire working again?
any help is really really appreciated,
many thanks
Already checked bortak's troubleshooting guide (see my sig).
Sent from my HTC Desire using Tapatalk
MatDrOiD said:
Already checked bortak's troubleshooting guide (see my sig).
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Thanks for your response. I have followed the guide above, point "[4]RUU PROBLEMS", S-ON solution, but I still cannot flash the RUU. I am stuck on HTC logo with "4" triangles and I get always the same error:
[1] BOOTLOADER - OK
[2] RADIO_V2 - FAIL-PU
[3] RADIO_CUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - OK
[7] USERDATA - OK
[8] SPLASH1 - OK
[9] SPLASH2 - OK
Partition update fail!
Update Fail!
Here are the information I get if I disconnect the USB cable (it seems to be stuck in RUU mode):
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Jul 22 2011.16:19:16
RUU
Please help me!
Any suggestion? it is an hardware problem?
thanks
Seems like radio-brick which is currently unfixable.
Which RUU did you try to flash?
Sent from my HTC Desire using Tapatalk
MatDrOiD said:
Seems like radio-brick which is currently unfixable.
Which RUU did you try to flash?
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
I tried this:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release_159811_signed.exe
but no luck.
Any suggestion? could I try to use revolutionary in order to have access to the recovery once again? other ideas?
Try 2.3.3 RUU from htcdev.com.
have you been sucessful? i have the same problem, with an originally vodafone branded device.
now I'm:
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.08
Jul 22 2011.16:19:16
RUU files fail with different errors and "Radio_V2 Fail-PU" error.
also Black screen and fancy triangles etc....
Goldcard is created and in place, but still couldn't use the WWE RUU...
Is it a complete brick? Is it confirmed that "radio-brick which is currently unfixable."??
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
gives me ERROR [140]: BOOTLOADER-VERSION-ERROR
RUU_Bravo_Froyo_Vodafone_UK_2.33.161.2_Radio_32.49.00.32U_5.11.05.27_release_157522_signed
gives me ERROR [152]: IMAGE-UPDATE-ERROR
RUU_HTC Desire Android 2.3 Upgrade (Gingerbread)
gives me ERROR [152]: IMAGE-UPDATE-ERROR
I feel like troubleshootin'-Putin already, because I'm on it since 7 hours and there don't seem to be a solution!
Guess what - i have the exact same problem!
However if i go through the recovery procedure, sometimes the Radio image flashes ok, however during boot up, the phone is stuck on the htc white start up screen. If i flash the RUU again, i end up with the radio error.
HELP!!!
ardsar said:
Guess what - i have the exact same problem!
However if i go through the recovery procedure, sometimes the Radio image flashes ok, however during boot up, the phone is stuck on the htc white start up screen. If i flash the RUU again, i end up with the radio error.
HELP!!!
Click to expand...
Click to collapse
please tell (and how) if you are successful!!
i got exactly the same problem! has anyone any idea how to solve this?
thx
mtbiker_kev said:
i got exactly the same problem! has anyone any idea how to solve this?
thx
Click to expand...
Click to collapse
Radio-bricks are currently unfixable. Unless one can flash 2.3.3 RUU, which is the last hope.
Tried 2.3.3 RUU but nothing changed...I have tried everything I can think of!
I pulled my old Desire out of a draw yesterday as I need it as a test device - Exactly the same situation with RADIO_V2 - FAIL-PU
I've tried so many different RUUs, but all fail... Stumped after hours and hours of messing and searching.
If anyone manages to resolve this without returning to HTC, please do post!
same here...
alas
also have same problem
tried all...
also posted about it here
no go....
hope someone can fix this..
funny thing is :
was using botrak's troubleshooting guide
and it was there that was suggested to flash android 2.3 gingerbread ruu
i think that should be mentioned to be condemned
because once you flash that you can NOT downgrade again if anything goes wrong
as is obvious from our cases!!
really hope someone cracks this!
fastboot oem boot <- That command boots the phone friends.
htc inspire has black screen with white triangles
ledzgio said:
Hi all,
I have a big problem with my desire. I was unable to start my desire (S-ON, never rooted) so I have decided to downlod RUU:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
booted in fastboot with vol- + power and ran the above file but the process has failed so I had to reboot and since that moment I don't have fastboot menu anymore and I just see the 4 triangles screen. I can still connect phone to PC (windows 7) and run RUU file but everytime it fails with 152 error and "Radio_V2 Fail-PU" error (I can see the RUU process when I disconnect the USB cable, when I connect the cable again the RUU disappear and I see again the black screen with HTC and 4 triangles). I have also tried RUU_HTC Desire Android 2.3 Upgrade (Gingerbread).exe but no lucks.
Any suggestion on how to get my desire working again?
any help is really really appreciated,
many thanks
Click to expand...
Click to collapse
hi guys, im having the same problem with my htc inspire 4g im stuck and dont know what to do, can u plz help:crying:
jwijnaldum said:
hi guys, im having the same problem with my htc inspire 4g im stuck and dont know what to do, can u plz help:crying:
Click to expand...
Click to collapse
try posting in htc inspire 4g section
Sorry guys, service best of ur luck. My desire got this for triangles before but it is not of radio brick, it is that I've got cm7r2 hboot.....
Sent from my HTC Desire using xda app-developers app
---------- Post added at 09:29 AM ---------- Previous post was at 09:23 AM ----------
You can try flashing an individual standalone radio image from those that rom cookers provide in dev thread
Sent from my HTC Desire using xda app-developers app
For anyone who is looking for the solution or a similiar one.. just install all the drivers on the net for the htc desire (at least i installed everything i could find). Go to htcdev.com website, register for free, and get a copy of the ruu for desire gingerbread. Attach the phone to the pc, turn it on, wait until the pc recognizes the phone and get the ruu_xxx.exe running. Solved!
Hope I came useful to some one.
Another way: Relock bootloader
PHP:
fastboot oem lock
and then install the corect RUU
Hey there,
i actually own a Htc sensation, but my cousin wanted to s off and root his desire, which went all fine.
Now after a year, he wanted to send in his Desireto maintenance, and asked me to to return everything to stock. According to the guides, it was said that is would be sufficient to simply flash a stock ruu to S-on und unroot again.
I flashed the stock ruu via pc, and followed all the instructions. It says flash successful and i can use the desire again.
There goes the trouble, the phone wont boot up anymore only white boot screen with htc logo, no bootloop or anything similiar, all i can access is the bootloader ?
Am i missing something ? can someone help me out please ?
The bootloader says the following :
REVOLUTIONARY
BRAVO PVT4 SHIP S-OFF
HBOOT 6.93.1002
MICROP-051d
TOUCH PANEL SYNT0101
RADIO 4.05.00.11
This is was it given after flashing the officiall ruu , recovery cant be started anymore as well
any help would be appreciated
First you need to flash downgrade hboot from:
www.alpharev.nl
And flash it via fastboot.
Then download 2.3 ruu from htcdev (you have an explanation how to get in my signature) and run it from your PC. Then you'll get s-on and stock and working 2.3 on your device.
Sent from my HTC Desire using Flashes and Thunders
That did it, thank you !
Hi there guys, I'm new to this place so I'm not entirely sure if this is the right area to post, hope it is XD
So basically, I have my HTC Desire, which I am unable to root. When I try rooting via Revoked, it gets to the screen where it says 'Make sure drivers are installed', but the thing is, when I follow tutorials for installing the drivers (Install HTC Sync, uninstall, connect with the Android 1.0 and update) the problem is, I do get Android 1.0, but I can't update it, it is just grayed out. But then Windows Update does something and it changes to HTC Serial Interface (COM4/5)
So in another tutorial I read I had to unlock bootloader, so I jumped on HTCDev and got the file and then it updated my HBoot to 1.03.0003, which apparently is not something that works or something? (I'm not fully sure, first time rooting D: ) and then I read I had to downgrade, but when I downgrade with the RUU it just won't work, it says to make sure it's connected even though it is. I am fully stuck, and really don't know what to do!
The guides I used (I can't find em all) are:
http://theunlockr.com/2010/09/20/how-to-root-the-htc-desire-unrevoked-method/
http://androidforums.com/desire-all...ked-windows-updated-20th-december-2012-a.html
http://androidforums.com/desire-all-things-root/503471-desire-all-things-root-guide.html
http://forum.xda-developers.com/showthread.php?t=788044
http://forum.xda-developers.com/showthread.php?t=2032467
http://forum.xda-developers.com/showthread.php?t=1550397
If I could get some guidance, maybe in the form of Teamviewer or something, I would be hugely grateful! (and if you could tell me how to increase storage space etc that would be AMAZING)
Info: PC Windows 7 64bit Ultimate
Android: Froyo 2.2.2 (Software number: 2.29.405.14)
*** LOCKED (OOW) ***
BRAVO PVT4 SHIP S-ON
HBOOT- 1.03.003
MICROP-051d
TOUCH PANEL- SYNW0101
RADIO-5.11.05.27
Dec 21 2011, 20:44:09
Flash the ruu using this guide: http://forum.xda-developers.com/showpost.php?p=45298337&postcount=21
Let me know once you've done that.
Sent from my HTC Desire using XDA Free mobile app
I know this topic shown in other tread at Amaze 4G. But the answer was not complete since now I'm with HTC desire HD.
originally Posted by PeterC18st
1.RELOCK Amaze
2.Downloaded 2.14.531.3from here http://d-h.st/z70
3.Renamed it to PH85IMG.zip
4.Placed it onto my SD-Card
5.Rebooted into bootloader.
6.Let bootloader find the update and let it finish its update.
7.Rebooted phone.
How should I do now for my desire HD? what file actually he was asking to download?
my phone state now is
ACE PVT SHIP S-On RL
HBOOT-2.00.0027
RADIO-26.14.04.28_M
Much appreciated the senior here can help, I'm stuck with here months already.:crying:
Tq!
Some update.
I also tried to flash RUU (considered downgrading) by using AAHK2 methods.
but it stuck at CMD when flashing, showing
Starting flash process...
< waiting for device >
That is...nothing happen after that. And I even try to unplug and plug in again.
and it said success after that. But when return to recovery, it prompt me to wipe data/cache.
I do so. then I try to flash a ROM (CM7.20). same problem again.
sorry for bad english and long story. hope some senior can help here.
Thanks!