Develop Bugs

* Samsung Omnia I900 Arabic Support *

UPDATED
Now Its possible to read and write arabic with your Samsung Omnia.
this program is hassle free ! no more start up freeze
Instructions :
After sending the files to your device run them in order :
1- Arabic Keyboard New !!
2- Arabic1 New !!
3- Arabic2 New !!
After a soft reset, Go to Settings >> Input >> Input Method and select Arabic Keyboard from the drop menu. Now your omnia is ready to read and write arabic.

ألف شكر لك يابطل..

thaaaaaaaaaaaaaaaaaaaaaaanks

i test on my i780,
so far no problem.....
very smooth......
just a problem about keyboard interface....
cant show properly even i change to 96dpi.....
have any idea about it???
TQ

Thanks
i will try it on my i780

almansouri said:
Now Its possible to read and write arabic with your Samsung Omnia.
this program is hassle free ! no more start up freeze
Instructions :
After sending the files to your device run them in order :
1- Mobidiv WM6.1 install FIX
2- Arabic1
3- Arabic2
After a soft reset, Go to Settings >> Input >> Input Method annd select Arabic Keyboard from the drop menu. Now your omnia is ready to read and write arabic.
Click to expand...
Click to collapse
So Thank's ...

help needed
thanks guys for your efforts , i did as above and installed the arabic keyboard successfully but there is a problem still. when i write in arabic it does it from left to right rather than right to left if you know what i mean, so the letters are not forming words and very confiusing to read. any suggestions!!!
Thanks in advance

Go to Settings >>>Regional Settings>>> Select Arabic (Saudi Arabia). It will be the first on the top of the selection drop down menu.. hope this helps

Go to Settings >>>Regional Settings>>> Select Arabic (Saudi Arabia), It should be on Arabic (Saudi Arabia). It will be the first on the top of the selection drop down menu.. hope this helps

help
hey can you please help me im new and i just t the omnia..can you please tell me where i should send it to should i unzip it first more detailed instructions..thanks for the help

hey guys its ok i figured it out bs one more problem..the actual keyboard doesnt appear but i can read arabic..i dont what the problem is i did the chose region and i did the input keyboard..please reply as soon as you can

really thanks broo
i was searching for the Omnia arabic
and it worked =)

almansouri said:
Now Its possible to read and write arabic with your Samsung Omnia.
this program is hassle free ! no more start up freeze
Instructions :
After sending the files to your device run them in order :
1- Mobidiv WM6.1 install FIX
2- Arabic1
3- Arabic2
After a soft reset, Go to Settings >> Input >> Input Method annd select Arabic Keyboard from the drop menu. Now your omnia is ready to read and write arabic.
Click to expand...
Click to collapse
I have done the above on mine, the date showed in arabic but in reversed letters. The arabic message received are also in reversed letters and the only arabic Keyboard is incomplete and named PCM keyboard.... the result seems strange

Hi guys. I've tried to install Arabic keyboard. I can read Arabic fine, but cannot get Arabic keyboard although I have gone thru what is stated word to word. Any advice. Thanks

worked well but had to do this
greetings, thanks much for the tip, it worked for me but I had to install these files first, then install Imaginet for WM5, then reinstall the same files. Now the arabic reading and writing works, but non of the other imaginet software, i.e. dictionary, prayers time, hijri calendar ..etc. Regards,

x-h-x said:
hey can you please help me im new and i just t the omnia..can you please tell me where i should send it to should i unzip it first more detailed instructions..thanks for the help
Click to expand...
Click to collapse
Pleaaaaaaaaase somebody help

Hello All
I'm using Treo Pro I just instaled the this software but the msg is reveserd, can anyone help on this??

x-h-x said:
hey can you please help me im new and i just t the omnia..can you please tell me where i should send it to should i unzip it first more detailed instructions..thanks for the help
Click to expand...
Click to collapse
Here is the drill .... send those files to your device " my storage "
Go to Programs and scroll down until you find file explorer and locate the files you sent and run them in their sequence arab 1 ... arab 2 .. keyboard .. the device will restart .. go back and run the second file and the keyboard.

fajwani said:
Hello All
I'm using Treo Pro I just instaled the this software but the msg is reveserd, can anyone help on this??
Click to expand...
Click to collapse
these are new files .. try them after removing the previous files

Arabic Keyboard and Font
Thanks a lot for your help. I finally was able to download the files and they worked beautifully on my Samsung i900.

[Q]How to add a language to the csc file

Hi everyone
The thing I want to do is add my own language (for viewing and texting only) to the xxjk1 firmware
I have my own region files so I can copy files from it to the xxjk1 firmware
Does anyone know how can I do it?
(Is it possible after all ?)

By the way, you can flash JK1 firmware with CSC from your region (with your own language). But it must be CSC from any other firmware of Bada 1.2...

Have you tried it your self?
Is it ok to flash xxjd1 with a kc1 csc file from another region?

Yes, I often use it.

Thank you very much for the tip.
Now does anybody know the answer of the first question I asked?

thats totally wrong
just tried with XXJID and took CSC from JPKC1 and guess what happened
lost Arabic language
please find a way to fix it

I don't undestand what is wrong... I use it many times and it was working. As I said If you going to flash Bada 1.2 firmware, CSC is must be from other Bada 1.2 firmware.

Both firmwares are 1.2. so according to what u said it should work
But looks like it didn't work
Which two regions and firmwares are you yourself(baza 14) using?
Thanks for participating

For example I flashed FW JK1 with CSC from JL1 (XD region).

Oh you mean all from Europe??
i just flashed JK1 to make sure that it doesn't support Arabic too
@roostaamir
give it a try maybe it will work for you
i'll wait for ho1od until he succeeds in QMD Compression tools maybe it will fix that problem

Sorry but i don't have my wave in my own hands right now(it has a long story)
But if you can test this and share the results,I would be thanful:
Flash your phone with xxjid and the parts of jp firmware which have open arabic.each time with one of the jp files.(i mean first flash the factory-fs from the jp firmware and other parts from xxjid.then do this with pfs .... and so on)
Please tell me when will the arabic language will be in your phone.
(i mean which file caused the arabic language to be in your phone)
Thanks

that is a bad idea
i tried it before a got a really bad results
just wait for ho1od i think he will finish his tool in a few days
P.S. : Arabic language was there but appeared in squares shape (i think it is due to decoding of it) maybe your language will be another case

@mylove90 Yes, all from Europe. Maybe it is the problem.

The decoding of arabic language differ totally than european languages
that's the problem

as i now bada internal works with unicode, everything over is not important. i am a developer and we are trying to pass all string always in unicode to bada cause this is saveing the process to convert them. In my two apps i could add russian as normal letters without any problems.

The language i want to add is persian(Simillar to arabic)
What can i do?
Are u saying that there's no way to do it?
Or the new tool (being created by ho1od) can do it?

ho1od is developing Wave remaker : a small tool to make changes in the bada firmware files
CSC files (apparently contains language) have two parts the first one every one can extract it using trix and the other one is QMD compressed so no one extracted it until(as i know) now so i am waiting for ho1od to see what is in there
but i think there will be *.rsr files that contains language

http://forum.xda-developers.com/showthread.php?t=984482
Next step after (de)compress, is *.rsr edit for Display Language.
No idea which files needed for Keyboard ...
But at this time not tested, because QMD...
Best Regards

any news anyone?

Where are the language files?

Where are the language files?
Is the language file is the CSC?
Is it enough to just change the csc and language change?
If I take csc Israeli and installs it on the new version of bada
Is the device supposed to be in Hebrew now?
I changed the CSC and the language has not changed ... I've pre-configeration and nothing happened except that I now can not even choose a language ...
I wish you would answer the questions ... Thank you and good day!

same Questions as you .can someone help me ,what to do? thanks!

as i know the fonts of the languages are in rc1 file so you can read your language with rc1 but if you want to type with your lang you have to use csc file

Hebrew language
hii litebass2
nice to find more Israeli's here ...
I wish the answer was simple - actually the rc1 file is holding the language files
the keyboard the X9 settings and all
and CSC file contains the operator settings and regional settings
we need combination of both .
By the way - do you have PTR or PCL firmware for 1.2 ?
10x

before few month I flashed my phone to bada 2.0 (i have S8530 from pelephone..)
and I saw that the firmware is not hebrew..a
so I made hebrew firmware base on PCL without keyboard
cause we cant upload files to Rc1 file..and to get the keyboard files with Stune for ex.
but you have to understand its doesn't matter the "operator setting" and the "regional setting"
if you have not the files the make the
firmware hebrew you will not have hebrew on your phone
now I have the original PCL version
Because I gave the device to repair and "Pelephone" given me back new device

Tried with Wave Remaker ?
after looking and looking the net I have found PCL ver or 1.2
i have taken ( I think) all the important files from the Rc1 and transferred them to the new rc1 of bada 2.0 but I cant sign the file with wave remarker to reupload them via multiuploader to the phone
i can sign the pfs file - the csc and shp and i have great custom ver but I coudnt with rc1 file - which is the important file
did you try ?

http://forum.xda-developers.com/showthread.php?t=984482
For language support minimum requirement:
Font in *.ttf (True Type Format)
bada 1.x
System/Font (RC1 file)
bada 2.0
SystemCSC/Font (CSC in compressed part)
Text is in rsr files
SystemCSC\String
Both RC1 and CSC compressed part is hard nearly impossible to Edit now...
Please, btw...
Try to read other Threads and better deliver anwsers, instead open ever new Thread for same Question...
And nobody investigate deeper.
[Q] Is it possible to translate into another language?
http://forum.xda-developers.com/showthread.php?t=1200864
[Q] Changing the system font
http://forum.xda-developers.com/showthread.php?t=910275
Please, this time download your Firmware...
Investigate deeper and post results...
Like how to edit... *.rsr files...
You could compare for instance some files, maybe no changes between bada 1.x and bada 2.0 Strings...
I have no problem... my German is supported in every Font and English too...
Best Regards

Local font
From where I can add local font to wave?
and honestly where's the thank button?

[Custom Firmware] S8530XPKH3 with Asian keyBoard

I know that many of you were waiting for this! So here it is.
Now you can write the following languages for S8530​​:
English
korean
Indonesian
Vietname
Thai
Chinese_S
MALAY
Aarabic
Farsi
Urdu
Hebrew
Know Bugs :
-We can't capture screen I wanted to show you pictures ...)
-All Bugs that we know from XPKH3
-Post here if you found more bugs..
Remember :
In this version we have a blue screen when we flash the first time
and need to remove the battery and enter again to download mode..
Link to download :
http://www.multiupload.com/87D60BWETZ
password : Bada_Xda
Bootfiles (I forgot to put it in the archive..LOL) :
http://www.multiupload.com/XOD0WASL3S
I hope you will help to make this firemware better...
On this occasion I want to say thanks to:
ho1od for your WaveRemaker
b.kubica for your Trix
adfree for your very important information

Did XPKH3 have Asian stuff included ?!!!!!
Did you add system strings or not??
Thank you so much for your work
I'd love to help you to make it better
Best Regards

mylove90 said:
Did XPKH3 have Asian stuff included ?!!!!!
Did you add system strings or not??
Thank you so much for your work
I'd love to help you to make it better
Best Regards
Click to expand...
Click to collapse
No..I added few files from S8500MBUKI1
I didn't add system string ..only keyboard is asian lang for now..
and the system lang it's english..

And signature check?!!!!!!
I appreciate uploading the firmware maybe telling me about the signature hack will be better
I'll edit the strings for you
Best Regards

I did not examine in depth the importance of signature, but I will in the coming days ...
I tested all the files on the shpApp.app..
and I can tell that you can even to take all the files from shpapp.app from some firemware and replace them with other firmware , and the system will run but with a lot of bugs and after 2 min it crashed...I did not try to do it without a signature ....
Thanks

request for 8500,please and thanks

I can't download the Files ,I'm In China,can you send the files to my email :[email protected]
thank you!

How to insert Keyboard into FW? Can u give me source plz!!!! I really need a Vietnamese keyboard!!!!!!!!!!!!

why didn't you gave stats?
can you please explien what work and what isn't?
you gave to much generle
try to use this programe for capturing :
http://www.megaupload.com/?d=BJ03X1O6

When will you release it for s8500?

http://www.multiupload.com/RW1QRH5QFF
this for s8500...you can visit in my site http://www.bada-il.co.cc

Thanks!
Are the bugs in this version the same as the ones on the wave 2's frimware?
And can you make this frimware with Orange settings please?
Thanks in advance!

Danieliko said:
Thanks!
Are the bugs in this version the same as the ones on the wave 2's frimware?
And can you make this frimware with Orange settings please?
Thanks in advance!
Click to expand...
Click to collapse
you do it by your self after you flashed this firmware you will change the CSC with the Orange CSC with Stune

Can you link me an Orange CSC please?

Keyboard not showing up
litebass2 said:
multiupload com RW1QRH5QFF
this for s8500...you can visit in my site
Click to expand...
Click to collapse
hi,
first of all thanks,
i flashed the MBUKI from the link,
and i can see hebrew menus (with a bit translation errors)
but no keyboard is showing up when i click a text box.
even if i switch to english menus, the keyboard is not showing up.
in the setting, you can't choose keyboard, and if you press the little blue arrow right to the "samsung keyboard", nothing happens.
just for everyone's knowledge, i submitted to samsung an application with hebrew keyboard, not as convienent as a normal system keyboard, but still something to handle with. it works only with bada 2.0.
i hope soon it will be in samsung apps, but if someone wants it now, i can send him the source code and you can build it yourself with the sdk and have it on your phone.

idanrichman said:
hi,
first of all thanks,
i flashed the MBUKI from the link,
and i can see hebrew menus (with a bit translation errors)
but no keyboard is showing up when i click a text box.
even if i switch to english menus, the keyboard is not showing up.
in the setting, you can't choose keyboard, and if you press the little blue arrow right to the "samsung keyboard", nothing happens.
just for everyone's knowledge, i submitted to samsung an application with hebrew keyboard, not as convienent as a normal system keyboard, but still something to handle with. it works only with bada 2.0.
i hope soon it will be in samsung apps, but if someone wants it now, i can send him the source code and you can build it yourself with the sdk and have it on your phone.
Click to expand...
Click to collapse
send me the source code please if you don't mind

hebrewkeyboard source code
those stupid guys from samsung apps are keep rejecting this app because they don't know how to use it (and its not hard at all).
do an import of filesystem in your sdk and choose the folder in the .rar,
and then maybe you'll need to change the properties of the project to the correct path of the workspace or compiler. hope it'll go easy and smooth.
then just build and run on target and it will install it on your phone.

hmmmmm
It is a flash based keyboard not like Thai keyboard on Samsung Apps
I didn't test it on the device yet but a small recommendation to get certification...Make it able to Multi-task so users can use it in the background
Best Regards

litebass2 said:
http://www.multiupload.com/RW1QRH5QFF
this for s8500...you can visit in my site http://www.bada-il.co.cc
Click to expand...
Click to collapse
Do you have thai keyboard in this the firmware ?,tell me please

[Q] How to add keyboard language?

How can I add keyboard language in bada 2? (Wave 3)
I bought Wave 3 and there is no Arabic, only English.
I succeeded to add Arabic to the menu, but now I have only Enlglish keybard, and I need Arabic too.
PLEASE HELP ME!!!

Go to keyboard option that is on your keyboard (the small icon which is the same than the "parameter one"). Then keyboard language. There, you can choose all the keyboard you want to add. After that if you want to change the keyboard you are using you just have to click on the button where are the two first letter of the language. For exemple in english it is "en".

Arabic S8600 Firmware should be this here...S8600JPKK4/S8600OJPKK3
Otherwise no arabic Language...
Read this too...
http://forum.xda-developers.com/showthread.php?t=984482
Best Regards

Thank you adfree!!!!
But I want know how to add more language in myself.
I understood that it something in OpAsiaIME.so file, but I don't know how to open this file type or how to edit it...

I understood that it something in OpAsiaIME.so file, but I don't know how to open this file type or how to edit it...
Click to expand...
Click to collapse
Problem, it is not easy and no complete solution available...
Especially for S8600 users...
So you can choose. Between Original S8600 Firmware with arabic support...
Best Regards

Sorry shaiws I misunderstood your question...

adfree said:
Problem, it is not easy and no complete solution available...
Especially for S8600 users...
So you can choose. Between Original S8600 Firmware with arabic support...
Best Regards
Click to expand...
Click to collapse
If I have OpAsiaIME.so file in Shp folder in Shpapp file, I need to install only CSC with Arabic, and I have Arabic keyboard?