Hi,
can someone help me about the settings (special the mms settings) on the htc universal, please ?
My Provider is Fonic/ Germany and since 3 days i couldn't set the informations on the right places.
The automatic setup (per sms) from fonic doesn't work because i can't install or save the sms on my handy....and puzzle about the pincode in the sms...so i must do it manually.
The settings are:
---------------------------------------------------------
Setting for MMS:
FONIC GPRS/UMTS
Profilname: FONIC UMTS
APN (Zugangspunkt): pinternet.interkom.de
User: -
Password: -
IP-Adresse: 82.113.100.6
IP-Port für WAP 1.x Handy: 9201
IP-Port: für WAP 2.0 Handy: 8080
Verbindungssicherheit: Aus
Startsite (Homepage): http://wap.fonic.de
FONIC MMS
Name (Profilname): FONIC MMS
Datenträger: “GPRS„ oder “UMTS„
APN (Zugangspunkt): pinternet.interkom.de
Benutzername: -
Passwort: -
Gültigkeitsdauer:Maximum
Read- Report: Aus
Zustell.Report: Aus
Auto-Delete:Off
Auto-Download: On
Messageserver (Startsite): http://10.81.0.7:8002
WAP-Profil: FONIC UMTS
Setting for WAP
FONIC GPRS/UMTS
Profilname: FONIC UMTS
APN (Zugangspunkt): pinternet.interkom.de
Benutzer: -
Passwort: -
IP-Adresse: 82.113.100.6
IP-Port für WAP 1.x Handy: 9201
IP-Port: für WAP 2.0 Handy: 8080
Verbindungssicherheit: Aus
Startsite (Homepage): http://wap.fonic.de
Setting for Internet
FONIC GPRS/UMTS
APN (Zugangspunkt): pinternet.interkom.de
Benutzer: -
Passwort: -
---------------------------------------------------------
Parameters under "My ISP" or "My Work Network" or under "Messaging" and must i used proxies and which ?
Thanx for the time
Schuschi
Problem is soved !
Solved, closed
Related
Hi guys, Could somebody please post MMS settings for an MDAIII on the T-mobile UK network. Much appreciated!
Setup the internet first with the following.
I can connect to the internet fine using:
APN: general.t-mobile.uk
username= user
password= one2one
Then setup the mms client as follows.
Server name: t-MobileUK
Gateway: 149.254.211.10
Server Address: http://mmsc.t-mobile.co.uk:8002
I use my XDA II in the uk and the states. Works like a charm. and I have T-Mobile! Let me know if it works for you.
If you want to use the cab just copy it to your device and run it
For those that have upgraded to the latest ROM you probably don't have the GRPS settings, I hope the simple steps below will help.
CINGULAR SETTINGS
1) Start, Settings, Connections, GPRS, - CHAP Authentication
2) Start, Settings, Connections, Manage existing connections
Name: MY ISP GPRS, Edit
Name: MY ISP GPRS
Modem: Cellular Line (GPRS, 3G)
Access point name: wap.cingular
Username: WAP[email protected]
Password: CINGULAR1
Advanced tab: use server-assigned ip address, and check use IP header compression (TCP/IP).
Servers: use server-assigned addresses.
walshieau released an applicaion to automatically configure these settings a couple weeks back.
its on the forum.
jasjamming said:
walshieau released an applicaion to automatically configure these settings a couple weeks back.
its on the forum.
Click to expand...
Click to collapse
as well as 2 flavors of a cing rom and shoguns cing settings cab... sigh....
I recently upgraded the rom to WM6 on my universal but in doing so i've lost the connection settings enabling me to connect to the internet via my 02 (uk) provider.
Can anyone point me in the right direction for getting them back.
aRTE YOU ON CONTRACT OR PAY AS YOU GO?
Wright me in to private, or i might miss you reply...
Hopefully it helps!!!!
Cheers optika it did help but the info was missing the bit about "myisp" , i've done a little bit more digging and found the settings which i'll post below in full, just in case others have the same problem as I did
__________________________________________________
My ISP
Add a new modem connection
Name: Mobile Web
Modem: Cellular line (GPRS, 3G)
Access Point Name: mobile.o2.co.uk
username: O2web (not sure on case sensitivity - I have cap on first letter O)
password: password
Click Advanced:
move to servers tab
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
My Work Network
Add a new modem connection
Name: O2 Active
Modem: Cellular Line (GPRS, 3G)
Access Point Name: wap.o2.co.uk
username: o2wap
password: password
click advanced: both tabs should be set to use server assigned
click ok
My Work Network
Click Set up My proxy server
check 'This network connects me to the Internet'
check 'This network uses a proxy server to connect to the internet'
leave proxy server blank
click advanced
Click WAP
Server: 193.113.200.195
Port: 9201
username: o2wap
password: password
click ok
__________________________________________________
tom tom 6
i recently changed the rom on my xda orbit from german to english. but my tom tom is not there nomore however i have another tomtom 6 but no activation code for it.
is there a way fo getting arround this
cotc2001 said:
Cheers optika it did help but the info was missing the bit about "myisp" , i've done a little bit more digging and found the settings which i'll post below in full, just in case others have the same problem as I did
__________________________________________________
My ISP
Add a new modem connection
Name: Mobile Web
Modem: Cellular line (GPRS, 3G)
Access Point Name: mobile.o2.co.uk
username: O2web (not sure on case sensitivity - I have cap on first letter O)
password: password
Click Advanced:
move to servers tab
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
My Work Network
Add a new modem connection
Name: O2 Active
Modem: Cellular Line (GPRS, 3G)
Access Point Name: wap.o2.co.uk
username: o2wap
password: password
click advanced: both tabs should be set to use server assigned
click ok
My Work Network
Click Set up My proxy server
check 'This network connects me to the Internet'
check 'This network uses a proxy server to connect to the internet'
leave proxy server blank
click advanced
Click WAP
Server: 193.113.200.195
Port: 9201
username: o2wap
password: password
click ok
__________________________________________________
Click to expand...
Click to collapse
Setings i sent you were from O2.
i did not change anything..
helps me all the time.
daveonfire said:
i recently changed the rom on my xda orbit from german to english. but my tom tom is not there nomore however i have another tomtom 6 but no activation code for it.
is there a way fo getting arround this
Click to expand...
Click to collapse
have you kept code from before???
If not go in to my folder...
below
I am sure that this has been posted already, but I have not been able to find my answer yet.
I am trying to get my MMS settings to work with suncom's service, here is my problem i think?
Suncom uses port 9201 and WAP 2.0 - when i set to port 9201 i get a default of WAP 1.2 and when I set to WAP 2.0 I get a default port of 8677.
Can someone please tell me how to change the port settings on the Hermes running WM5....I also have the same issue with an S710 running WM6.
Thanks in advance for your help.
I can't get the GPRS on my (formerly O2) XDA 2s to work my new network Vodafone (Pay as You GO).
Has anyone managed this?
Any suggestions?
So far I tried the settings from http://www.filesaveas.com/gprs.html
Half solved
I fiddled with it a bit more and got it to work. However it seems to lose connection "for an unnown reason" after 1-2 pages. I don't now why...
Vodafone seems to charge 13p per each page viewed on PAYG.
I thought I would put the settings here just in case someone else might need them.
In start - settings - Connectins Tab - Connections icon:
Enter name for connection: Vodafone GPRS
Select a modem: Cellular Line (GPRS)
Access point name: pp.vodafone.co.uk (for pAY AS YOU GO)
Usename: web Password: web
Domain 212.183.137.012
In advanced menu:
TCP/IP: tick "Use server-assigned IP address" Untick the rest.
Servers: tick Use server-assigned addresses, leave rest blank
In start - settings - Connectins Tab - GPRS:
I didn't change anyting here:
Authentication: PAP
GPRS - Setting: Class 10 (3R2T)
M