I can't get the GPRS on my (formerly O2) XDA 2s to work my new network Vodafone (Pay as You GO).
Has anyone managed this?
Any suggestions?
So far I tried the settings from http://www.filesaveas.com/gprs.html
Half solved
I fiddled with it a bit more and got it to work. However it seems to lose connection "for an unnown reason" after 1-2 pages. I don't now why...
Vodafone seems to charge 13p per each page viewed on PAYG.
I thought I would put the settings here just in case someone else might need them.
In start - settings - Connectins Tab - Connections icon:
Enter name for connection: Vodafone GPRS
Select a modem: Cellular Line (GPRS)
Access point name: pp.vodafone.co.uk (for pAY AS YOU GO)
Usename: web Password: web
Domain 212.183.137.012
In advanced menu:
TCP/IP: tick "Use server-assigned IP address" Untick the rest.
Servers: tick Use server-assigned addresses, leave rest blank
In start - settings - Connectins Tab - GPRS:
I didn't change anyting here:
Authentication: PAP
GPRS - Setting: Class 10 (3R2T)
M
Related
Added a Linksys WAP to my home network (itself a Linksys ADSL Router). When I search for a connection on my XDA2s I quickly connect to the WAP (The name of the SSID I set up on the WAP config appears in the Current Config window of my XDA).
Why can't I use PIE then. Sat in the cradle I can surf the net like a good'un, but WiFi just refuses to work. I can't access the WAP config page so I cannot be properly connected to the network.
I am getting somewhat frustrated - is this a WAP setup problem or a problem with my XDA?
Not sure if this is your problem but if it's complaining about 'No DNS server specified' etc when you're trying to browse you could try this:
Open Wireless Manager
Goto Tools->Network Cards
Select 'tiacxwln Compatible Wireless Ethernet'
Select the 'Name Servers' tab along the bottom
In the DNS box enter the IP address of your WAP
Soft reset (probably not ultimately necessary but it can't hurt)
Just a suggestion as it's proved useful for myself in the past.
JDH
P.S. If that doesn't work you could also try setting a static IP in the same dialogue
I recently updated my SX66 m to v1.4O. My SX66 is an ATT variant so I followed the instructions from Blue Angel. I am on the Cingular network and and am having difficulty connecting to the internet. I have checked the settings and everything appears to be correct. Does anyone have any ideas?
THanks
Copy this cab to the device and run it! Enjoy!
Mike
Does this just allow access to plain ol' vanilla MEdia Net, or does it allow access to the mMode homepage that AT&T used to have?
Um it says cingular. so um no Mmode at&t. If you want the gay Mmode change your home page.
There are two types of Access points for Cingular. If you have a "data plan" with them, usually for access to DUN or a dedicated data service like GoodLink, you want to use the ISP access point. If you're just trying to browse the web, and you have a pay per use or small intnernet, you use the WAP access point. If you don't have a plan for ISP it won't work - you should try WAP first. Here's the info:
Start > Settings > Connections tab > Connections Icon > Manage existing connections under MEdia Net
Select the existing Access Point and click Edit
On the wizard, select Cellular Line (GPRS) for your modem
For the next few pages you specify either the WAP or ISP access point. *cAsE does matter, you need to specify usernames and passwords in all caps*:
"WAP" APN:
Access point name: wap.cingular
User: [email protected]
Pass: CINGULAR1
"ISP" APN:
Access point name: isp.cingular
User: [email protected]
Pass: CINGULAR1
That should do it. save your changes at the end of the wizard and try connecting to the internet. Questions: josh AT pinwheeltech [NOSPAM] dot com.
For those that have upgraded to the latest ROM you probably don't have the GRPS settings, I hope the simple steps below will help.
CINGULAR SETTINGS
1) Start, Settings, Connections, GPRS, - CHAP Authentication
2) Start, Settings, Connections, Manage existing connections
Name: MY ISP GPRS, Edit
Name: MY ISP GPRS
Modem: Cellular Line (GPRS, 3G)
Access point name: wap.cingular
Username: WAP[email protected]
Password: CINGULAR1
Advanced tab: use server-assigned ip address, and check use IP header compression (TCP/IP).
Servers: use server-assigned addresses.
walshieau released an applicaion to automatically configure these settings a couple weeks back.
its on the forum.
jasjamming said:
walshieau released an applicaion to automatically configure these settings a couple weeks back.
its on the forum.
Click to expand...
Click to collapse
as well as 2 flavors of a cing rom and shoguns cing settings cab... sigh....
hi,
i am new to windows mobile. i am trying to connect to internet using my mobile over bluetooth/wifi. I can connect to active using either of them.
To access internet we have to use a http proxy with authentication for internet & specify 'no proxy' for internal websites.(for browsers)
in windows mobile, where should i specify these settings? I went to settings--> proxy and added http proxy, but couldn't figure out those 'connect from' work, wap etc. (connect what from what?)
i can access internal websites. using kavana's wm6.1
pay for unlimited web like the rest of us..i pay $30.00 every month for mine
and if everyone was paying for the unlimted internet maybe it would be cheaper than these people trying to set up proxy's
F$#k Proxy hack
If that's the way you want to go I suggest do a search/or google it 'cause I agree with hovax, the more people hack proxy's the more money we have to pay for our unlimited plans. I'm not speaking for everyone , but I know a lot of people here pay for their plan, rather than steal it.
well, i am from india. the plans we have here gives too low speed (10 to 15kbps) not worth it
timepassman said:
well, i am from india. the plans we have here gives too low speed (10 to 15kbps) not worth it
Click to expand...
Click to collapse
s**t outta luck
hi i have the 20.00 unlimted internet plan. is there a better proxy setting for the dash? because sometimes all the applications (sky fire, PIE, flick) refuses to connect to EDGE
okay im going to breakdown US only i dont think india has this
WINDOWS MOBILE 6.1 INTERNET SETTINGS!
ok first of all both of you guys that posted settings, they will work for the older versions. Good job for that cuz of the million tmobile phones I used that on!
Here are the settings for WM6.1
settings
connections
gprs
edit the existing T-Mobile Data with the following
connects to: wap network
access point: wap.voicestream.com
username and passwork: (leave blank)
authentication type: none
primary dns: 216.155.165.50
secondaty dns: 0.0.0.0
ip address: (leave blank)
now go back to connections menu
select gprs
select New...
name: tmobile gprs
connects to: wap network
access point: wap.voicestream.com
user name and password: (leave blank)
authentication type: none
primary dns: 216.155.165.50
secondary dns: 0.0.0.0
ip address: (leave blank)
now go to proxy from the connections menu
add new proxy
name: tmobile proxy
connects from: wap network
connects to: the internet
proxy (name port): 216.155.165.50:8080
type: HTTP
username and password: (leave blank)
now go back to the connections menu
click menu
select advanced
set all connections to automatic
now open IE
click menu
select tools
select options
select connections
check automatically detect settings
select network: wap network
I know you shouldnt need to GPRS accounts but for some reason on certain WM6 phones it ONLY works with both, doesnt matter if you have one or the other it wont work unless you have both (on certain phones), mine as well just put it all in, wont hurt anyway
P.S., this was all tested on 4 different t-mobile dash phones
Edge and IE work fine on any of the T-Zones plans with these settings on the dash just pop them in to Settings / Connection /
http://www.htcwiki.com/page/The+Dash+FAQ
NEXT TIME DO SOME RESEARCH GOOGLE IT OR USE THE SEARCH FORUM ABOVE^^^^ and maybe you wont have to ask stupid questions. most of this stuff is already on the web you just have to SEARCH
if it's not on the forum look at some other sites because most likely there's people like us that's had this problem before and solved it already.
there is already a tread regarding it
http://forum.xda-developers.com/showthread.php?t=374413
Hi, dears!
Q: why I can not use my wireless networks?!
I have two type of wireless network.
I can use both of this networks in my laptop, but I am confused and tired of retrying more and again and again in pocket pc.
===========================
First network is in our faculty:
1- Proxy Server (that will be set in pc in: InternetExplorer/Tools/InternetOptions/Connection/LanSetting/)
Address:192.168.12.20 Port:8080
2- And not any more setting is required in this network!
-----------------------------------
Second, in our dormitory:
1- Proxy Server (that will be set in pc in: InternetExplorer/Tools/InternetOptions/Connection/LanSetting/)
Address:192.168.0.1 Port:8080
2- In this network anyone has an specific IP for Wireless
Mine is:
IP: 192.168.0.188
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.188
(You maybe know it better than me that this configuration must be set in wireless properties in PC)
3- This network also use user-password that when I open opera or InternetExplorer (In PC), it will ask me for them:
suppose it is: user: 1111 and password: 2222
----------------------------------
In PC, I use both of this networks successfully.
Also I can connect both of them in ppc, (PPC show me "connected"!)
BUT! I cant not use this "connected" network in IE or Opera in PPC, Why?
I am really confused and tired.
----------------------------------
Now, who know what I must do?
Help Me, Just Step By Step!
Becuase I am a simple user of WM, not proffesional!
Extra Information:
Artemis P3300.
WM 6.1 Build 20771.1.4.6
I don't know what kind of more info is needed for describong device situation!
1. Setings-Conections-Conections-Advanced-Select Networks from My ISP changed it to My Work Network, select Edit button Proxy Setings to go and check on This network conects to the Internet button and then OK.
2. In Wifi settings on the card again in Conections (the icon is Wifi) Network Adapters to select The Internet. Ok. Wifi-and restarts it.
Good luck.
Dear, SPGI!
First thank you for answering.
Altought I did many test on this ways before, but I removed all old configurations first, and then I did your advice, but not worked!
I am often (and now) in Dormitory. In dormitory wireless network when I try to load any site IE shows this error: " The page connot be found. Check the name and try again", What is the matter? (In PC in this moment IE must show user-pass window!)
I saw some problem in wireless in this pags that their text was very onfusing for me!
http://forum.xda-developers.com/showthread.php?t=567110
http://forum.xda-developers.com/showthread.php?t=568878
Can I ask, those phone are same as mine? or they have another problem. becuase (I said) I can connect wireless, (altought it is useless yet) but it seems they can not turn their wireless or semi-problems.
-----
Everyone I restart my phone, it shows a message that had not set any data connection, why?
In Setting/Connection/Connection/Manage existing connections/Proxy Setting/Advanced/HTTP/
(I set dormitory wireless network server as 192.168.0.1 and port as 8080 there.)
There are username and passoword also that I think it must be instead of user-pass login that IE in PC will show when I Open IE. But I don not know what is the domain?
Then, If user-pass must be set here, what is the domain?
And if not: where it must be set?
Also, I found this In Setting/Connection/WiFi/Network Adapter/SDIO WLAN Wireless Adapter:
IP and Subnet mask and Default gateway.