Related
Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.
dietotherhythm said:
Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.
Click to expand...
Click to collapse
Why do you need to overclock that high? I've used the 1.8Ghz and found that to.be overkill. I'm running at about 1ghz at that seems ample.
Sent from my CM7 powered Desire Z
cjward23 said:
Why do you need to overclock that high? I've used the 1.8Ghz and found that to.be overkill. I'm running at about 1ghz at that seems ample.
Sent from my CM7 powered Desire Z
Click to expand...
Click to collapse
+1
Wouldn't that fry your phone without any active cooling system or something? Sounds unnecessarily risky..
dietotherhythm said:
Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.
Click to expand...
Click to collapse
You don't need a VM. You need to wipe the garbage off and install linux on the "bare metal".
While it would be *neat* to oc this phone to 2GHz - just because. It would be beyond useless and I can just see some noob burning down their parents house or possibly starting a nuclear war with Russia by accident. Lets not forget your carrier reporting you to the CIA for having a nuclear reactor in your phone.
Look, with no active cooling it's just downright stupid to go that high. However being the genius' that we are I'm sure somebody could devise a method to install a mini fan or some liquid cooling on this phone. But then you may need that nuclear reactor to power all that stuff. Haven't we already set a guiness world record at 1.8GHz on a production phone anyway? Maybe we need to tell them so we can make it in the book
My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds
MacaronyMax said:
My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds
Click to expand...
Click to collapse
LOL, it didn't make you go back in time or some ****?
The 1.9Ghz kernel caused my phone to crash. 2.0 would burn your phone's processor out. Just use the 1.8Ghz kernel and have the profiles on SetCPU set to the lowest speeds when the display's off.
Your phone may not actually run stable at 2GHz. Mine doesn't run stable past 1.6GHz, and that runs psx4droid *perfectly*, especially with the optimization they've done in the app recently.
Also, even with setCPU profiles, battery drain when you ARE running that high is a beeeotch.
Honestly, it's not really for OCing that high, but rather the look at what I can do I had a friend just ask be how high I can OC my phone and at 1.5GHz he's like woah :O His face at 2GHz would have been like
I previously used Flippy's kernel on my G2 and did OC it to 1.8 GHz, and got a Quadrant score of 3037. It was cool to see how fast my phone could actually get, but I'm more than comfortable with OC'ing it to 1.4 GHz. Anything more than that seems to be unnecessary to me, but that's just my opinion. Last thing I want is to have my G2 melt while it's in the pocket of my pants.
Try the .ko module and overclock that way
Sent from my HTC Vision using XDA App
mejorguille said:
Try the .ko module and overclock that way
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Oh yeah totally forgot that existed. Thank you for the useful response.
tried the module but the phone freezes after doing anything above 1.4ghz
I believe it needs voltage tweaking which I don't know how to go about sooo... yeah
MacaronyMax said:
My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds
Click to expand...
Click to collapse
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!
EdWRX said:
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!
Click to expand...
Click to collapse
Nope, not for me anyway. I know different HW revisions and such have an effect on how high you can oc but my phone doesn't skip a beat at 1.8GHZ. I'm sure I could go to 2GHZ or a bit higher but unless I'm trying to emulate a PS3, I don't see the purpose - aside from maybe setting a record.
KCRic said:
Nope, not for me anyway. I know different HW revisions and such have an effect on how high you can oc but my phone doesn't skip a beat at 1.8GHZ. I'm sure I could go to 2GHZ or a bit higher but unless I'm trying to emulate a PS3, I don't see the purpose - aside from maybe setting a record.
Click to expand...
Click to collapse
Same. I can do 1.8 all day if I keep near a charger. Anything over 1.3 will drain my battery like a monster though.
I keep at 1.2 regularly and only go higher for games.
Sent from my HTC Vision using XDA App
EdWRX said:
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!
Click to expand...
Click to collapse
I can jog 1.8 and 1.9Ghz for a day without even reaching a dangerous temperature.
Can I get some supportive ideas and less herp derp personal opinions?
Highest Ive pushed mine is 1.5ghz. No need to go any further, Im satisfied with the performance. I get a full days battery life and the temperatures never get critical (my setcpu profile is set to underclock at 38.2 degrees Celcius but my G2 hasn't gotten close to that). Im curious at what stage my G2 would score 3000+ in Quadrant.
You might PM flippy and see if he will customize a kernel for you that goes that high. Let him know you will send a certified letter signed in blood and a video of you stating you release him of all liability for what ever town you destroy when your phone goes nuclear.
Seriously though, I'm willing to be he'll make it for kicks if you ask nicely - btw, call guiness so you can make it into the record books. Also, I'm not sure but if you flash a 'blank' kernel couldn't you just echo the speed and voltage in the 00banner file or whichever one it is?
So, Im sure this was answered somewhere, and I searched all over.
With that said, why cant the Evo be overclocked past the standard 1.19 or 1.2? I know stability is an issue, but there are other ARM processors that can OC almost double. Is the Evo ARM processor just not able to handle anything past that?
Does anyone know?
Thank you for the insite
You cannot compare the processor in teh Evo to other similar processors. Every single processor is different, and overclocking the evo past those speeds could brick it.
Why would you want to overclock that far? The Evo has no ventilation and crappy power management, even with an extended battery. You're taking an already unstable system and pushing it to the edge. Not only will your phone overheat and freeze, but you can permanently damage the hardware.
I know every processor is different and each one has their own limits.
There is always a risk of bricking and damaging the actual hardware, but what im asking is, in theory, and a practical test, can you push the evo processor past the 1.19 that seems to be the limit (im not talking about going huge, but is there a possibility of being able to hit the 1.5Ghz?). Because there are certain frequencies that are not stable, but ones slightly past that could be stable.
Just throwing it out there.
A car traveling at 120 MPH is not as easy to control as a car doing the speed limit.
try it out n see what happens n then report back ur findings for others that have the same question and cannot find an answer anywhere
Product F(RED) said:
A car traveling at 120 MPH is not as easy to control as a car doing the speed limit.
Click to expand...
Click to collapse
good analogy but that doesnt help anything.
{ParanoiA} said:
try it out n see what happens n then report back ur findings for others that have the same question and cannot find an answer anywhere
Click to expand...
Click to collapse
I would, but all the kernels that the Devs have developed have either a limit put on them, or they havent been able to allow it to OC that far
shagav said:
good analogy but that doesnt help anything.
I would, but all the kernels that the Devs have developed have either a limit put on them, or they havent been able to allow it to OC that far
Click to expand...
Click to collapse
I was wondering this too. It would be nice to have the option to push it over 1.19ghz, I'll be the test dummy.
My Evo can handle 1228 fairly well but can tell its not as stable as say 1190. 1190 MHz is no prob...1267 usually crashes after a run or 3 in quadrant. 1113 runs niiiice for me and my 0004 evo
stkiswr said:
My Evo can handle 1228 fairly well but can tell its not as stable as say 1190. 1190 MHz is no prob...1267 usually crashes after a run or 3 in quadrant. 1113 runs niiiice for me and my 0004 evo
Click to expand...
Click to collapse
I can run 1190 just fine. Can a Dev possibly create a kernel that allows us to go past 1.2whatever.
I can't go up to 1.19 stabley
Gimme a couple a days to come up with a new sig that is cool.
if I pass 1190 endless bootloop.... then ya gotta be fast and turn that damn thing down
I can go to 1228 MHz with Tiamat but it will crash and reboot once you do a couple of things.
shagav said:
So, Im sure this was answered somewhere, and I searched all over.
With that said, why cant the Evo be overclocked past the standard 1.19 or 1.2? I know stability is an issue, but there are other ARM processors that can OC almost double. Is the Evo ARM processor just not able to handle anything past that?
Does anyone know?
Thank you for the insite
Click to expand...
Click to collapse
despite the meriad of answers you have gotten, I have been running my Evo on Sprint lovers Rom, and KiNgxKernel-Evo-12-BFS357-2.6.32.25-Flashable.zip for kernal.
I have been overclocked at 1267 since the day the kernal came out. it is singularly the only kernal that has allowed me to do this without ever crashing. OH, and I'm using
SetCPU 1267 on both min and max and scaling set to performance.
shagav said:
I know every processor is different and each one has their own limits.
There is always a risk of bricking and damaging the actual hardware, but what im asking is, in theory, and a practical test, can you push the evo processor past the 1.19 that seems to be the limit (im not talking about going huge, but is there a possibility of being able to hit the 1.5Ghz?). Because there are certain frequencies that are not stable, but ones slightly past that could be stable.
Just throwing it out there.
Click to expand...
Click to collapse
Not going too big? Going from 1.0 ghz to 1.5ghz on a phone is like going from a civic to a v8. Alot of computer cpu's dont even overclock 500 mhz. I think you're expecting a little too much from a phone. If you want more, go buy a dual-core cpu atrix 4g or something. I'm a speed freak myself when it comes to cpu overclocking (mainly on computers) but 1.113 is plenty for a phone. It even runs fine at 600mhz. Dont get me wrong, it would be cool to get it that high, but your phone would hate you lol
Overclocking
Just flashed Netflix-AllianceROM-2.1-HybriD-3D-OTA-Themed-r7.3TCsigned.zip and was wondering if there is a safe compatible overclocking kernel. Anyone have an idea?
kdogg530 said:
Just flashed Netflix-AllianceROM-2.1-HybriD-3D-OTA-Themed-r7.3TCsigned.zip and was wondering if there is a safe compatible overclocking kernel. Anyone have an idea?
Click to expand...
Click to collapse
There are tons of kernals available in the Dev forum. I personally recommend Netarchy's kernals, but you are free to try any of them.
kdogg530 said:
Just flashed Netflix-AllianceROM-2.1-HybriD-3D-OTA-Themed-r7.3TCsigned.zip and was wondering if there is a safe compatible overclocking kernel. Anyone have an idea?
Click to expand...
Click to collapse
Until HTC drops source codes you will lose camera and other things.
How did you overclock the CPU? I have tried the setCPU and it does not work, I have my Phone rooted, installed the crazy UNleashed rom (since uninstalled) and could not get the setCPU to overclock. Even though UNleashed is made to do that, and I have read others getting over clocked. I am running Synergy now, which I do not think it can Overclock the EVO, but I would like to know how you fine folks are accomplishing this. I would love to go 1.1 right now.
AmericanAlien said:
How did you overclock the CPU? I have tried the setCPU and it does not work, I have my Phone rooted, installed the crazy UNleashed rom (since uninstalled) and could not get the setCPU to overclock. Even though UNleashed is made to do that, and I have read others getting over clocked. I am running Synergy now, which I do not think it can Overclock the EVO, but I would like to know how you fine folks are accomplishing this. I would love to go 1.1 right now.
Click to expand...
Click to collapse
If you're using a stock HTC kernel, hit menu inside SetCPU -> Perflock Disabler. Disable Perflock -> Set On Boot. Ta da.
Hello,
I know it's stupid but i would like to overclock my OneX, what kernel should I choose ?
Thank you.
gatinho75 said:
Hello,
I know it's stupid but i would like to overclock my OneX, what kernel should I choose ?
Thank you.
Click to expand...
Click to collapse
only faux kernel betas allow OC
big warning OC is bad for the HOX given the thermal envelope
you are risking both you battery and processor if you OC
i know you are used to OC from other devices but those had headroom, it is not the case this time, T3 is operating at its max thermal capabilities on the HOX
You right, thank you.
gatinho75 said:
Hello,
I know it's stupid but i would like to overclock my OneX, what kernel should I choose ?
Thank you.
Click to expand...
Click to collapse
It's not stupid and I'm dying to overclock my HOX also. Unfortunately Faux's kernels won't let me overclock on my phone, I'm going to name my first kid for whoever is the first to let us overclock this beast .
As already said it gets already hot enough, overclocking will kill it.
And I used to love overclocking on my Xperia Arc, overclocked it 60%
But I think the HOX isn't made for it
Sent from my iPad 2 using Tapatalk
Flo95 said:
As already said it gets already hot enough, overclocking will kill it.
And I used to love overclocking on my Xperia Arc, overclocked it 60%
But I think the HOX isn't made for it
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
the snapdragon 2 on the Arc had a lot of headroom
the chipset is rated @ 1.5ghz stable!
not the case with T3 its milking the very maximum of the 40nm process
in other words Nvidia is OCing its T3 out of box because their chips are designed to survive massive amount of heat (sadly it doesnt mean the battery or other components would survive)
it is already Overclocked lol
sometimes you have to listen to the "science" of it and surrender
feel sorry for the kid
Why you need to overclock this beast. It is already an monster. Don't let it destroy.
Sent from my HTC One X using Tapatalk 2
It's fast enough already, leave the poor thing alone!
It's already running a fever!
I would actually like to underclock mine to keep heat down
Sent from my HTC One X using Tapatalk 2
I understand why people want to overclock. Why does someone tune a brand new sports car after all it is fast enough to reach the limit in no time.
What gets me is people posting "just leave it" "its fast enough". It's not your device and I'm sure they know its fast enough. Please those kinds of post really arnt needed.
As for the OC in faux's early (001bX) kernels overclocking was available although it was found there are 3 variants of the Tegra 3 SoC. And Asian variant, European and Australian variants. Each reacted differently to OC.
Taken from faux kerenel thread. Everything about OC'ing is from page 10~ to 45~ for anyone interested.
faux123 said:
WHOA! You have ANOTHER variant for Tegra3 Wow... how many variants are there... I will try to give you an OC build for your variant...
So far there are 3 Tegra3 variants:
Variant 1: European -- So far not OC capable (boot loops)
Variant 2: Australian -- Status unknown.. just reported...
Variant 3: Asian (Non-Australian) -- OC capable @ 1.70 GHz (very stable)
Click to expand...
Click to collapse
If you're wondering id love to have the capability of overclocking doesn't mean ill be overclocked 24/7
EDIT: @Kris underclocking is available on every kernel something like setcpu or sys tuner will be all you need. Although if your looking to keep heat down there's a thread on XDA about an app called corecontrol (not the one on play store) that can limit the Tegra 3 to 2 cores. Another thing too look at for reducing heat is undervolting. Sys tuner is also capable of this. Currently I believe faux's kernel is the only kernel with true UV control
nikorette said:
I understand why people want to overclock. Why does someone tune a brand new sports car after all it is fast enough to reach the limit in no time.
Taken from faux kerenel thread. Everything about OC'ing is from page 10~ to 45~ for anyone interested.
If you're wondering id love to have the capability of overclocking doesn't mean ill be overclocked 24/7l
Click to expand...
Click to collapse
I use Faux's kernels and even though I have the Asian one that supposedly can be overclocked to 1,700, mine maxes out at 1,500 just like all of the other ones. Still the Faux kernel upped my quadrant speed from 4,700 to 5,000 and seems quicker so I still use it daily. I'm still waiting for the first kernel that can be overclocked .
Only the early kernels had OC it was removed to avoid bootloops in the euro and aus tegra3's the 003bx kernels don't have oc ability
Sent from my HTC One X using Tapatalk 2
OK, so I currently have my PLAY set to 1.2ghz. My first android phone I OCd from 600mhz to 1ghz and one day while playing a game I heard a loud pop noise, then my phone shut off and that was that... toast. So I have been extremely leary of overclocking now. I am aware there are users who have OCd their phone to 1.4+
My question is how safe is when I use No frills to OC is it ramping up the volts to get that extra power. Also according to the Snapdragon layout it lists the S2 in our phones as capable of 1-1.5ghz... does this mean I could technically go up to 1.5 and be OK? I have a large 3600mha mugen battery, so thats not an issue, but what I am afraid of is popping my phones brains out...
http://en.wikipedia.org/wiki/Snapdragon_(system_on_chip)
Look at Snapdragon S2 section
MSM8255
Also, it sayd for phones that use the above chip.. GSM only for Xperia PLAY... if that is the case does that mean R800x users are on a differerent chip? And if so what chip is it? Thanks in advance.
jgregoryj1 said:
OK, so I currently have my PLAY set to 1.2ghz. My first android phone I OCd from 600mhz to 1ghz and one day while playing a game I heard a loud pop noise, then my phone shut off and that was that... toast. So I have been extremely leary of overclocking now. I am aware there are users who have OCd their phone to 1.4+
My question is how safe is when I use No frills to OC is it ramping up the volts to get that extra power. Also according to the Snapdragon layout it lists the S2 in our phones as capable of 1-1.5ghz... does this mean I could technically go up to 1.5 and be OK? I have a large 3600mha mugen battery, so thats not an issue, but what I am afraid of is popping my phones brains out...
http://en.wikipedia.org/wiki/Snapdragon_(system_on_chip)
Look at Snapdragon S2 section
MSM8255
Also, it sayd for phones that use the above chip.. GSM only for Xperia PLAY... if that is the case does that mean R800x users are on a differerent chip? And if so what chip is it? Thanks in advance.
Click to expand...
Click to collapse
We're on the MSM8655 instead of the 8225. iirc, the difference is that it's cdma oriented as opposed to gsm
Each chip is different in what it can handle, so your best bet is to test it out, slowly. When your system starts to act funky, step down the voltage/speed levels.
Pax
Ps. Tried running mine @ 2 ghz once and was promptly rewarded with a random reboot. It takes some time, but with mine I've figured out our can run 1.6 with no issues (I tend to keep it at to stock levels because my battery sucks )
Sent from my R800x using Tapatalk 2
paxChristos said:
We're on the MSM8655 instead of the 8225. iirc, the difference is that it's cdma oriented as opposed to gsm
Each chip is different in what it can handle, so your best bet is to test it out, slowly. When your system starts to act funky, step down the voltage/speed levels.
Pax
Ps. Tried running mine @ 2 ghz once and was promptly rewarded with a random reboot. It takes some time, but with mine I've figured out our can run 1.6 with no issues (I tend to keep it at to stock levels because my battery sucks )
Sent from my R800x using Tapatalk 2
Click to expand...
Click to collapse
K, thank you Pax for the feedback.
Just thought I would open this to everyone on R800x, interested if people could point there OC status below.
Mine is still on 1.2ghz. with Performance and BFQ
Highest I can go is 1.6, but I keep it around stock or slightly underclocked, with SetCPU profiles that increase to 1.2 for games and internet apps. smartassv2 and sio for governor and scheduler.
I heard that underclocking can end up reducing battery life over time. Is there truth to this or is it just a myth?
1.6Ghz and Performance when the screen is on.
Stock when the screen is off.
Battery last all day, but I don't use heavily.
Sent from my R800x using xda app-developers app
Solar.Plexus said:
I heard that underclocking can end up reducing battery life over time. Is there truth to this or is it just a myth?
Click to expand...
Click to collapse
There's a large number of things that can adversely affect battery life, but by the time it becomes a problem, you'd most likely be on a new phone, anyway.
Sent from my SCH-I500
I tried my r800x at 1.6ghz (running Cyanogenmod 9 with stock kernal), and I was stuck in a boot loop that I had to fix through CWM Recovery. I am now running stable at 1.4ghz.
Yeah I'm on my 2nd xplay after I tried to oc to 1.6. My phone got extremely hot so I pulled the battery to let it cool. Upon booting my touch screen was non responsive. I don't ever go past 1.4 now.
Sent from my Xperia Play
Umm I got a r800x and the Max I can clock too is 1GHz but I see people up to 1.6 how do you do that?
Sent from my GBTweaked R800x using tapatalk 2
crazymonkey05 said:
Umm I got a r800x and the Max I can clock too is 1GHz but I see people up to 1.6 how do you do that?
Sent from my GBTweaked R800x using tapatalk 2
Click to expand...
Click to collapse
Custom kernel such as LuPuS or DooMKerneL
1.6 min and max. SIO, with performance governor, then I switch it after 30% and lower to powersave sio, 804-416 Max or whatever those numbers are.
Sent from my R800x using xda app-developers app
savage24x said:
1.6 min and max. SIO, with performance governor, then I switch it after 30% and lower to powersave sio, 804-416 Max or whatever those numbers are.
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
Good luck with avoiding frying your phone
R800a 1.4 GHz, sio, ondemand, with Lupus GB v5 + Xperia NXT
My play can stable oc to 1.8ghz
Sprint Samsung Galaxy S II Epic 4G Touch w/ Stock 4.0.4
Xperia Play R800X w/ supercharged stock 2.3.3 and doomkernel
Running the LuPuSv7 Kernel on AOKP Milestone 6.
Max CPU: 1612MHz
Min CPU: 249MHz
Scaling Governor: Superbad
~Set to Boot~
Runs SUPER smooth!
Battery performance; half of the day under heavy use/gaming, up to 2.5 days when I'm only calling and texting.
Hello, my problem is that i installed extreme Kernel and want to OC my CPU up to 2 or 2.3GHz and every time i select this frequence, my Phone reboots because i can't Overvoltage my CPU.
Can someone explain me how to Overvoltage my CPU.
Xperia Play 800i
ROM NXT Gaming 1.2
Kernel Extreme Kernel
Do ya want to burn your SoC? Reboot is because not-so-good-quality of crystal, so better for you not to try changing voltage.
If i brick one of my phones it doesn't matter, i have another Xperia Play.
But i want to get more Speed out of it.
1.6GHz is to slow for me.
Then I am sorry, you have wrong phone.
This is an old phone with a old SoC, It is not meant to go that high.
Instead check out you background programs, rom and what cpu profile you got. If this tweaking don't make your play good enough get a new phone.