I haven't seen much about this case on the forums. I thought people might enjoy a review of another option. This is the the Boxwave Unicolor in frosted white that I received from Amazon.
You can purchase the case for 16.95 with free shipping.
Boxwave.com
Amazon.com
The case is made of two different materials. The rim/bumper is made of a gloss TPU material. This is the what constitutes the color (frosted white) of the case. It does wrap the front of the phone, creating the lip for lay flat/facedown protection. The back is made of "see through" matte hard plastic. The pictures on the website are kind of deceiving as far as the back appears. It's doesn't seem as see through as it actually is. Hopefully the pictures I put up are a better representation of this. I actually like the effect, the hyperskin of the back door shows through and from straight on it almost looks as if there is no back cover at all. The hard plastic is thick and rigid enough to expect good protection.
I am using a Verizon LTE Galaxy Nexus and it fits very well with the standard battery door. The case does not add much thickness to the phone in my opinion. It is actually much tougher (but not too tough) to remove than other standard tpu cases, which I think lends credence as to how well this case fits. All of the cutouts are spot on. In regards to using this case with an extended battery door you will notice a squishy feeling on the bottom third of the sides, but the the lip of the case still wraps around the screen. I'm personally using the standard battery door with the extended battery and it fits in the case perfectly.
I do feel that the case is of good quality and will protect the phone as well and perhaps better than a diztronic or cruzer tpus case due to the hard plastic back. The buttons are standard tpu feel and are fairly easy to press, and to me are easy to find by touch. I personally like my buttons to be covered due to wear that I've had on previous phones where the buttons were exposed.
Overall I think the case is a nice option and something a little different than the cases that have been reviewed here already. The only real complaint I may have is the seam around the edge of the phone on the TPU, but thats fairly standard among these types of cases. It may be a bit over priced at 16.95 but I'm not regretting the purchase. Please ask questions, I'll try my best to answer them.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are with the extended battery door on:
Link to the full album:
http://imageshack.us/g/201/20120217170239518.jpg/
Some pics of the case would be nice or possibly the phone IN the case.
jonnyg1097 said:
Some pics of the case would be nice or possibly the phone IN the case.
Click to expand...
Click to collapse
I have some photos uploaded to image shack but I can't post links here yet. Pm me and I can send you the link.
here's the link if anyone is interested
http://www.amazon.com/BoxWave-UniCo...EZO2/ref=sr_1_1?ie=UTF8&qid=1329540157&sr=8-1
Looks similar to the sgp's. I like!
Updated op with pictures.
are the buttons easily depressed? I had a commuter and was terrible.
I've never used the commuter so i can't really compare, but I personally don't have any trouble pressing the buttons. The definitely aren't as nice as the naked button, but feel good enough for me.
OMG, this case is orrible! XD
matteventu said:
OMG, this case is orrible! XD
Click to expand...
Click to collapse
Really? What's so wrong about it? I really like how the back is clear, different compared to other cases
---------- Post added at 11:39 AM ---------- Previous post was at 11:03 AM ----------
I might have to buy this one! Very tempting
D3TH METAL said:
Really? What's so wrong about it? I really like how the back is clear, different compared to other cases
---------- Post added at 11:39 AM ---------- Previous post was at 11:03 AM ----------
I might have to buy this one! Very tempting
Click to expand...
Click to collapse
I agree,
all the cutouts look very professional as well
BlackDino said:
I agree,
all the cutouts look very professional as well
Click to expand...
Click to collapse
I just bought the frosted white. It will look awesome with a custom etched battery cover
Related
I recently came across this brand while looking for a case, brand is AkiBa. They are made in Taiwan so I believe quality and fitment will be quite good. Its a slider type case so no screws to fasten the case. I believe they go for $59USD, I'm still trying to find a shop that ships to Canada.
What do you think of this case?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
looks tough! although i don't think it provides any shock absorbing capacities
Lots of pictures of the case here, as a review :
http://www.eprice.com.tw/mobile/talk/4159/4669264/
If anyone ever finds a way to order them please share.
Yes please post a way to order them
---------- Post added at 09:36 PM ---------- Previous post was at 09:31 PM ----------
case is a variant of "sweet armor". I did a basic search "sweet armor s2" and i got lots of results. it's not the slider version but the screw version. try searching for it. one of them leads to this : http://english.gmarket.co.kr/challenge/neo_goods/goods.asp?goodscode=216196087
Doesn't 60 USD sound a little expensive for a bumper?
Which color do you guys think look best on a black S2? I'm think about getting black and chrome if I can ever find out where to order!!
Looks a litle bit like the one from Taurus, but the Taurus one looks better.
---------- Post added at 02:23 PM ---------- Previous post was at 02:08 PM ----------
But it's nice, too :-D
Since the antennas are in the bottom of the phone and it's covered by metal I would be concerned that it would degrade signal quality.
pappschlumpf said:
Looks a litle bit like the one from Taurus, but the Taurus one looks better.
---------- Post added at 02:23 PM ---------- Previous post was at 02:08 PM ----------
But it's nice, too :-D
Click to expand...
Click to collapse
I think the taurus metal case is too bulky. this one is slim
As with all metal cases, they will degrade signal quality, but only a little.
I think I'm in love with the black one lol
I was very tempted to buy the taurus case, but then I saw this thread. Now I cant decide, plus I cant find these on ebay. Could anyone, if its possible, share a link to buy one of these ? For EU.
father is going to Taiwan in a few days...might ask if he can have a look for these cases especially...if so, try to get a few and ship to people around New Zealand and/or Australia...?
0semaj0 said:
father is going to Taiwan in a few days...might ask if he can have a look for these cases especially...if so, try to get a few and ship to people around New Zealand and/or Australia...?
Click to expand...
Click to collapse
Nice people here on the XDA forum! I'm looking into where I can purchase these as well and will help my fellow Canadians too if they want to pick up this case.
nice looking
but:
1. it will be difficult to access buttons, since they already thin
2. expencive
Hmmm....it looks good but I think it is not very handy to use a metal cover.
I love my silicone cover. It protects my phone and when I put it on a slippery surface it stays on it's place, I like that!
Also I think a metal cover will soon look less good because of the scratches on it!
When Your phone falls on a floor of stone it wont protect your phone, I think it will bring even more damaging risc.
lexi250 said:
Nice people here on the XDA forum! I'm looking into where I can purchase these as well and will help my fellow Canadians too if they want to pick up this case.
Click to expand...
Click to collapse
The silver IMO looks awesome awesome...but looking at the photos, the recess on the buttons do look quite a lot...
i think i may buy this one:
http://english.gmarket.co.kr/challe...01&pos_class_kind=T&keyword_order=sweet+armor
but dont know which color yet, but the price is quite expenisve like all other metal case =/
will it fit a zenis dock thought?
not really like this Akaida !
Taurus much more aggressive...
zkyevolved said:
Doesn't 60 USD sound a little expensive for a bumper?
Click to expand...
Click to collapse
I was thinking the same surely they have to be available cheaper than that.
oopeteroo said:
i think i may buy this one:
http://english.gmarket.co.kr/challe...01&pos_class_kind=T&keyword_order=sweet+armor
but dont know which color yet, but the price is quite expenisve like all other metal case =/
will it fit a zenis dock thought?
Click to expand...
Click to collapse
One thing I hate about the sweet armor case is they still have the 'hole' for their Korean version TV antenna. It looks bulkier than the AkiBa too!
I think I found the sources for this cases! I will go ahead and order black and chrome for myself!
Since these two cases are pretty similar (silicone inside, hard shell outside), here are some pics of both to help you decide.
Size wise both are very similar with the Seidio being slightly thinner in width.
The inner silicone of the Incipio comes out farther onto the screen than the Seidio.
The sides of the Seidio are not floppy like the Incipio, mainly because it has an extra piece of the hard outer shell latched on.
They're both lint magnets, so bare with me on these select pics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Awesome what do u think of the seidio? I'm thinking about ordering one. I already have the incipio silicrylic and it's OK. Which one do you like better? Also do you think you can post pics of the seidio case with the phone in it? Thanks
Sent from my SGH-T989 using xda premium
Current fave is the Seidio, it just fits tighter than the incipio.
I'll snap some more pics with the phone inside, I just need to find another cam.
Sent from my SGH-T989
Cool ill have to order one thanks broseph.
Sent from my SGH-T989 using xda premium
I currently have the Seidio and posted a lot of pics in the other thread. I like that the Seidio has the side reinforced the other did not. Plus the seidio has a kickstand.
Sent from my SGH-T989 using xda premium
Nice comparison! Is that Incipio white and grey? If you get sick of either one and PM me Ed! I'm a case whore LOL!
Lakeshow423 said:
Nice comparison! Is that Incipio white and grey? If you get sick of either one and PM me Ed! I'm a case whore LOL!
Click to expand...
Click to collapse
Yup, the White/Gray one.
Lol, you're about as bad as I am when it comes to cases. When it's time to sell the phone, I usually end up with a crapload of accessories.
I'll probably get rid of the Incipio sooner or later, I'll let you know if I do
lol case whore..
---------- Post added at 06:42 PM ---------- Previous post was at 06:41 PM ----------
Lakeshow423 said:
Nice comparison! Is that Incipio white and grey? If you get sick of either one and PM me Ed! I'm a case whore LOL!
Click to expand...
Click to collapse
dude i posted on your fs thread. i wanted to buy your case and holster.
where did you get the white and grey incipio case?
ktan004 said:
where did you get the white and grey incipio case?
Click to expand...
Click to collapse
http://www.myincipio.com/Samsung-Ga...CRYLIC-Hard-Shell-Case-with-Silicone-Core.asp
they dont have the grey and white one anymore
ktan004 said:
they dont have the grey and white one anymore
Click to expand...
Click to collapse
It's still available, it's the dark/light gray version.
Sent from my SGH-T989
Oh! I thought it was white. My mistake lol.
I have two questions:
1) Does the case make the phone feel bulky?
2) Does the case cause your phone to echo? like if you're on the phone with someone, can they hear themselves talking?
I have a two piece case, but it's one of those cheap ones so every time I'm on the phone with someone, they keep mentioning that they can hear themselves.
ktan004 said:
Oh! I thought it was white. My mistake lol.
I have two questions:
1) Does the case make the phone feel bulky?
2) Does the case cause your phone to echo? like if you're on the phone with someone, can they hear themselves talking?
I have a two piece case, but it's one of those cheap ones so every time I'm on the phone with someone, they keep mentioning that they can hear themselves.
Click to expand...
Click to collapse
1) slightly, all cases like this do.
2) don't think I've had that happen.
Sent from my SGH-T989
They both look great...I'm torn
I am torn between the Seidio and the Trident Agies case.
Get them all, swap daily
How much bulk does the Seidio Active add? I am looking at a case to use once in awhile and I just want something that offers decent protection with minimal bulk. I don't need anything thick like Otterbox Defenders or anything like that.
moondrius said:
How much bulk does the Seidio Active add? I am looking at a case to use once in awhile and I just want something that offers decent protection with minimal bulk. I don't need anything thick like Otterbox Defenders or anything like that.
Click to expand...
Click to collapse
The Active is definitely not as thick as the defender. Honestly, it isn't much bulk. If you want protection, you're going to add size no matter what.
Which cases/bumpers provide minor drop protection without adding bulk? Anything less bulky than TPU?
clninja said:
Incipio Feather is now available !
I just ordered mine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.incipio.com/Samsung-Gala...-S-III-feather-Ultralight-Hard-Shell-Case.asp
Click to expand...
Click to collapse
here you go
clninja said:
here you go
Click to expand...
Click to collapse
Excellent! Ordered!
But if it fell, there isn't anything to absorb shock, no? I figured a bumper would provide good protection because if it fell, the actual phone would never touch the floor and there isn't extra bulk added
Sent from my HTC One S using Tapatalk 2
exactly not every piece of phone is protected! try some 0.9mm thin silicon from ebay...this will not protect your phone ...
http://www.amazon.com/Amzer-AMZ9396..._1_7?s=wireless&ie=UTF8&qid=1339253840&sr=1-7
Anyone have that one?
Case mate "Barely there". Not much for protection but it doesn't add much bulk but will help for minor fumbles. If you wanted a case that would hold up from chest high drops, a minimal no bulk case isn't what anyone should be looking for anyway. I have the barely there on my thunderbolt and it has been very nice. For aonyone like me that doesn't drop there phone but wants a little more protection than a skin, the case mate option is great.
hah2110 said:
http://www.amazon.com/Amzer-AMZ9396..._1_7?s=wireless&ie=UTF8&qid=1339253840&sr=1-7
Anyone have that one?
Click to expand...
Click to collapse
Are you kidding same same all the same, the whole upper edge is exposed!!! no more protection than one in 2nd post...
I have the official Samsung TPU, it doesn't add that much bulk at all.
http://www.mobilefun.co.uk/samsung-galaxy-s3-tpu-case-clear-samgsvtpucl-p35370.htm
Search Tridea on EBay. They have some slick looking covers that I'm looking into purchasing. Just have to wait until payday
BungeBash said:
Search Tridea on EBay. They have some slick looking covers that I'm looking into purchasing. Just have to wait until payday
Click to expand...
Click to collapse
Man, they look nice (some of them), but they look massive as well... Not the kind of things that one would say "doesn't add bulk".
The allke is not too bad, still... I may end up getting one
Not out yet, but this case looks to be good; minimal but also offering good protection
http://www.goballisticcase.com/products/samsung-galaxy-s-iii-ballistic-life-style-smooth-series-case
http://www.mobilefun.co.uk/crystal-case-for-samsung-galaxy-s3-p35478.htm
Its barely visible and clear, just the way I like it. Why hide the beautiful back of the case with another colour. Shame have to wait
kidd78 said:
http://www.mobilefun.co.uk/crystal-case-for-samsung-galaxy-s3-p35478.htm
Its barely visible and clear, just the way I like it. Why hide the beautiful back of the case with another colour. Shame have to wait
Click to expand...
Click to collapse
Looks nice, though I wish it covered the top of the device.
http://www.mobilefun.co.uk/genuine-samsung-s3-slim-case-white-efc-1g6swec-twin-pack-p35227.htm
These look really thin and would offer mild protection from minor slips and falls.
Buy a good casing to protect your SIII
Hi Guys,
just want to share my unfortunate event happened to my 8days old SIII.
To make story short I drop my S III on a hard surface, face down ( average height est 0.5 meter). Pick it up, heart dropped a moment. Display cracked. I had all this while put on screen protector as well as casing. Unfortunately.It does not do it job well. Went to Samsung service Ctr. Off course warranty not covered, Damage done USD$220 for replacement of entire front panel.
So my advice to you guys. Especially if you have occasionally butter fingers like I do. Get a good casing to protect your new S III.
Got the barely there case. Not much protection. Especially on the front where it is needed. Nice and sexy case.
http://www.amazon.com/gp/product/B0089E283G
This "Composite Poly-carbonate shell" Case looks pretty cool.
hboos said:
http://www.mobilefun.co.uk/genuine-samsung-s3-slim-case-white-efc-1g6swec-twin-pack-p35227.htm
These look really thin and would offer mild protection from minor slips and falls.
Click to expand...
Click to collapse
I like this case, wish it come with black color
I Dig that! I might have to order this one.
---------- Post added at 06:10 AM ---------- Previous post was at 06:08 AM ----------
FWIW Drew...here it is in blue...
http://www.mobilefun.co.uk/genuine-samsung-s3-slim-case-blue-efc-1g6sbec-twin-pack-p35225.htm
There are many hard cases on the market and most feel like hard plastic shells. This case actually feels like rubber with the stiffness of plastic. It just feels like quality. It also manages to come about 1/4 of an inch further on the bottom and top to cover more area. The cutouts around the power and volume rockers are recessed which make a world of difference when pushing the already almost flush buttons. It also give extremely good grip. I dropped my first galaxy s3 with a casemate on it and that case didn't have any bottom or top protection and my phone suffered. I posted a picture of the damage and the casemate. If it were in the rearth it would have survived without a scratch. I can't say enough how good this case feels in the hand. Its a really slick phone and it needs a grippy case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Glad to hear a good review. I ordered one of these for my preordered S3.:fingers-crossed:
I ordered this, the casemate barely there, the Nilkin hard case, and I bought an Affinity smoke glass hardshell from Bestbuy that I was planning to return once I got one of the cases I ordered but boy does it look nice. I might keep it. It looks gorgeous.
Is there any angle that would hit the bottom or top edge if you dropped it? like facing 45 degrees forward?
Tazer2death said:
Is there any angle that would hit the bottom or top edge if you dropped it? like facing 45 degrees forward?
Click to expand...
Click to collapse
No there isn't unless it falls on a squared edge. Plus the rubbery coating gives extra protection.
if i ever buy a hardcase for my galaxy it will be this one.
glad to hear it works well.
Wow. After this case came, on the website they are giving away lanyard strap with it.......
could you post some pics of the phone with the case on it?
Thanks
Had the Slim on my SII and my Note. Absolutely loved them.
If I had a III this would be the case for me without a doubt.
It's a shame that they don't have any plans to release one for the One X.
Sent from my HTC One X
Ordered one last night. Never used a case on my Epic 4G but that's because they were a pain to find. Looks thin enough which was my only concern. Didn't want to add on a lot of extra bulk. Thanks
jitz said:
could you post some pics of the phone with the case on it?
Thanks
Click to expand...
Click to collapse
I could but they wouldn't do any justice to the pics on the rearth website.
I bought one of these for my Note. For the $30 I paid for it, I expected more. Why they don't make the plastic go all the way around the bezel is beyond me. I will pass on this one for the S3.
I think it would be fragile, that the reason no cases manufacturer makes a case like this with the bottom and the top covered.
Just ordered mine, thanks for the recommendation.
It took me a while though as I could not find a slime case!
)
Is there a link for these cases Google isn't bringing up anything
http://www.google.ie/webhp?sourceid....2,or.r_gc.r_pw.r_qf.,cf.osb&biw=1366&bih=643
Looks nice but for me cases with volume/power cut outs just feel awkward to me. I much prefer the built in buttons
jonny68 said:
Is there a link for these cases Google isn't bringing up anything
http://www.google.ie/webhp?sourceid....2,or.r_gc.r_pw.r_qf.,cf.osb&biw=1366&bih=643
Click to expand...
Click to collapse
Maybe try to search for slim case. But if you really want slime then keep looking...
Sent from my GT-I9300 using Tapatalk 2
@falconeight thanks for the suggestion. just ordered from their official site. they're offering free 2-3 day shipping. it can't come soon enough. i'm so stressed that something bad will happen to my new baby!
http://www.rearthusa.com/galaxy_s3_ringke_case
i think it's the size of the phone. large, but thin, that makes me feel like it will not take a fall very gracefully. fingers crossed until the case arrives.
oh also, in case anyone is having problems googling the case... it's Rearth Ringke Slim (the OP is missing a "g" and added the "e" in slime LOL)
This is an advertisement, not a review.
Got my Ringke Slim the other day. Similar to my Galaxy Nexus one, except it doesn't protect the top and bottom and it doesn't come with a screen protector or rubber port protectors. Overall I love it though, very thin. But after receiving my ROCK case, I'll probably use that more often. If you're looking for something that will make it look like you don't have a case on it, this is it.
After searching for a soft silicone type case and only finding one cheap $5 on the bay...I came across what I thought was something possibly softer and has more grip than the typical TPU cases out there. I didnt want an expensive O-box type or one that adds so much bulk. I was only looking for something with moderate protection but soft and very gripping like silicone rubber.
I saw this YouTube vid on the Body Glove Satin case and it looked like it was softer and yet offered decent protection, so I was excited to get it for a few reasons.
1. it reshapes the bottom of the phone so it lays flat
2. has cut outs for the volume and power key making it easier to find and use quickly compared to covered ones
3. may be softer than the million other TPU type cases
But now after getting it......it failed in the one area of being at all close to anything soft or silicone. It is pretty much the same TPU type material as the million others out there. Though it has that etched/molded "satin finish" lines on the back, they only provide slight help in grip as the material is slippery anyway like the other TPU cases. It is nice that the molded cut lines on the side give it some decent feel and slightly better grip than a smooth TPU case.
The cut outs:
-All the cut outs are slightly larger than the few other cases I have seen in general.
-Charge port cut out is not at all restrictive to any of the many plugs I use.
- Headphone hole is plenty big enough to work with several different sized headset plugs I have.
-Mic holes are larger than the exit holes on the phone which allow sound to travel easy into phone.
- Power and volume cut outs are also wide as well. The opening off the bottom of the keys is done so
your fingers can rest and or quickly adjust as needed. It is also easy to do in the dark or not looking at the keys.
- Speaker and the Camera cut outs are perfect and not too big or too small, very well done.
As mentioned one of the aspects I like very much with this case is that you can rest the phone on its back and it does not rock or move around when you use the touch screen.
The lip of the case over the top of the screen is not tall, maybe 1-1.5mm above the screen. It also does not hang deep into the screen off the sides which would limit any swiping ability from any side of the screen.
Over all I like the case a lot, I just wish it was closer to being a softer silicone type material for grip in the hand as well as its grip on things like car seats, my counsel above the shift lever (that fake wood laminate) that i often set it on to use GPS while driving, and any other surface it may be knocked off accidentally like tables and such.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Woah that looks cool. Is it heavy?
Looks good but i have this one and actually its feel better..
nefescalanadam said:
Looks good but i have this one and actually its feel better..
Click to expand...
Click to collapse
Where did you get them? I saw the exact same model and I don't remember where :crying:
+1 where did you find those nefescalanadam?
Bert98 said:
Where did you get them? I saw the exact same model and I don't remember where :crying:
Click to expand...
Click to collapse
DigitalSnow said:
+1 where did you find those nefescalanadam?
Click to expand...
Click to collapse
I will send you pm..
Me too, please!
Hate to be a pain in the *** but if you could pm me too it would be awesome.
Thanks!
fundre said:
Woah that looks cool. Is it heavy?
Click to expand...
Click to collapse
The BG satin case weighs 31gm. My Moto G is 151gm.
nefescalanadam send me a pm as well. Im still looking for possible alternatives.
Is that case only soft grip around the side bumper? What is the material like on the black back side?
I'll just post what nefescalanadam sent.
http://www.aliexpress.com/item/SGP-...T1032-Hybrid-Silicone-PC-Dual/1884004449.html
Click to expand...
Click to collapse
The case is a Spigen Hybrid Case, but it appears to be no longer in production.
So far, I have not found any re-sellers with the case in stock.
DigitalSnow said:
I'll just post what nefescalanadam sent.
The case is a Spigen Hybrid Case, but it appears to be no longer in production.
So far, I have not found any re-sellers with the case in stock.
Click to expand...
Click to collapse
Never mind....that is a poor quality fake Spigen case.........terrible molding shows in pics...plus.....NED Spigen lol
I should of known if its from Taobao or aliexpress.com
the texture looks good but this is the bulky one