hi all.
I got a Vodafone Romania Galaxy Nexus yesterday and started doing the usual stuff , oem unlock, root, install custom rom... Everything went smoooth ( i had another gnex in december so i knew what i had to do). Used Galaxy Nexus toolkit 5.3. I installed ARHD 2.1.5 with stock kernel then i tried to revert back to stock. So i got the images from google site and reflashed with the same galaxy nexus toolkit.
Then it started. After flashing was ok, phone rebooted and started to bootloop. Shows the Google logo, vibrates and reboots. Countless times.
Tried to reflash it. same stuff. Used the odin file chainfire posted. Odin flash was fine too, but when it rebooted, the same endless loop. Tied all rom variants ( its a GSM Nexus). Nothing, still loop.
I thought i should re-lock it and try to get it back, but the fun part is I cannot re-relock. I start the phone, go to fastboot, it shows up when i type : fastboot devices, i do fastboot oem unlock command, does its magic, shows up as locked, but after reboot ( even if i reboot bootloader), it's unlocked again.
I can flash temporary CWM but not permanent. Needles to say i didnt't do a nandroid before....
What else can i do, if there's anything i can do to make it work?
Thanks in advance.
Related
So I am the proud owner of a shiny, new Galaxy Nexus (GSM). Unlocked the bootloader and installed CWM recovery and was doing great. Today I decided to install the volume fix. Installed the zip through recovery, completed and rebooted. The phone got stuck in a bootloop over and over and over and over and would not boot Android at all. Did a ton of research here and everywhere and, in a panic, I booted into CWM recovery, reset the cache & did a full factory reset. NOW, the phone will not go past the Google bootscreen with the unlock symbol, no matter what I do. AND, I can't even flash the original google image because I can't get in to set USB debugging so my computer won't even recognize the phone (FYI, I'm on a Mac). I am at a complete loss and don't know what to do. If I could only get the computer to recognize the phone I could flash the original google image through Terminal, but alas, I can't. Any ideas? If I can somehow get this phone back up and running I would be eternally grateful. For now, I think I may be SOL. Thanks....
This happened to me, I was not able to solve the issue, even though I could push and pull data to and from the device via ADB. I could still not get past the google logo. I decided to lock the boot loader again and return to the store for a new device.
http://groups.google.com/group/android-building/msg/2cd2b16ed56a7e84
Sent from my Galaxy Nexus using XDA App
hartford said:
So I am the proud owner of a shiny, new Galaxy Nexus (GSM). Unlocked the bootloader and installed CWM recovery and was doing great. Today I decided to install the volume fix. Installed the zip through recovery, completed and rebooted. The phone got stuck in a bootloop over and over and over and over and would not boot Android at all. Did a ton of research here and everywhere and, in a panic, I booted into CWM recovery, reset the cache & did a full factory reset. NOW, the phone will not go past the Google bootscreen with the unlock symbol, no matter what I do. AND, I can't even flash the original google image because I can't get in to set USB debugging so my computer won't even recognize the phone (FYI, I'm on a Mac). I am at a complete loss and don't know what to do. If I could only get the computer to recognize the phone I could flash the original google image through Terminal, but alas, I can't. Any ideas? If I can somehow get this phone back up and running I would be eternally grateful. For now, I think I may be SOL. Thanks....
Click to expand...
Click to collapse
One more post like this in Dev section and you'll be banned for 3 weeks
I am running the stock rom without root and unlock and I got the 4.0.2 OTA update 3 days ago. Today when I do the pattern unlock my phone froze and reboot. Now I cannot get pass the Google logo boot screen.
I am able to get into the recovery mode but I don't want to do a factory restore as I don't have anything backup yet.
Is there any solution to this boot loop problem? I am surprise that I am getting this problem as I am running the stock rom without any root / mod.
If there is no solution to this, is there any way I can backup my phone before doing the factory restore?
Many thanks!
You can back up via adb. Try searching in the General threads, since there's a long topic on this...
Good luck!
Thanks, I do find information about backup, but I can't find anything regarding the bootloop...
When i got stuck at the Google screen with a bootloop i booted into the bootloader/fastboot screen with vol up+down power and i redid the one click all process and it basically rewiped my device and put it back to working again with unlocked bootloader rooted etc....
All you have to remember is what build number you have and let the toolkit work its magic.
tigersgt said:
Thanks, I do find information about backup, but I can't find anything regarding the bootloop...
Click to expand...
Click to collapse
Sorry, forgot to mention. You're probably gonna have to wipe via recovery - which is why I pointed you to a back up...
danger-rat said:
Sorry, forgot to mention. You're probably gonna have to wipe via recovery - which is why I pointed you to a back up...
Click to expand...
Click to collapse
I can't find a way to backup without going into Android. I can only go to Fastboot Mode.
Anyone know how to backup the file using abd without getting into android?
Why did make 2 threads about this. Unlock the boot loader and use adb to flash your stock. Image files. You will loose all data unfortunately but I think that's the only way to fix it.
Sent from my Galaxy Nexus using xda premium
Ok I'm stuck with the same problem now. I wanted to flash a ROM, so I downloaded AOKP, flashed it and rebooted and the phone refuses to boot past the Google logo and keeps rebooting again and again. I am able to get into the recovery. I have flashed the ROM several times and its still the same. I have done a complete wipe as well. Still no go.
Fastboot command doesnt work in the bootloader either. I have made sure the drivers are installed, still there is nothing when I type fastboot devices. If I type any fastboot command it just says <waiting for device> or something like that.
Any other suggestions? :-s
So I was trying to put JB on my GN using this:
pcworld.idg.com.au/article/429778/how_update_your_galaxy_nexus_jelly_bean/[/url]
I reached to apoint where i had 4.04 yakju, but when I put the file to get JB, It said error and aborted, i went to wipe data and reboot, wipe data worked fine, reboot led me to the google home screen and is stuck there.
I can access fastboot. Recovery mode takes me to that android with the danger sign, doing another reset doesnt work, clicking reboot doesnt work.
I'm pretty nooby at this. I read a few other forums and they said something about flashing a new rom or something but I don't understand.
Please help! The phone isn't mine! Need help ASAP before owner finds out I messed up their phone, thanks!
If you can access fastboot and your bootloader is unlocked just flash a stock system image.
These are the reasons people shouldn't just one click everything they do. If you understood how fastboot worked you would be golden.
Reflash recovery. Then mount USB storage and then get a ROM on there and flash it.
Sent from my Galaxy Nexus using xda app-developers app
xjman said:
If you can access fastboot and your bootloader is unlocked just flash a stock system image.
These are the reasons people should just one click everything they do. If you understood how fastboot worked you would be golden.
Click to expand...
Click to collapse
The site I went to dumbed down everything, and all i had to do was input numbers into some program. I double checked what a fastboot was. I definitely don't know how to work that. I mixed up the fastboot with the bootloader...
how do i reflash recovery and get a rom on there? I know this is asking alot....sorry
My bootloader is unlocked but im not rooted. I will (figure out how to) root if needed.
Open up a terminal on your computer use fastboot to flash the recovery image.
Since you didn't take the time learn what you were doing to begin with, I would take the time now to go read. The answers are easily found with google, or searching this site.
Roughly, install adb and fastboot on your computer, load drivers for your phone, download the proper recovery and put it in the fastboot directory on your pc, plug in the phone boot to the bootloader
open term
./fastboot oem unlock
./fastboot flash recovery <nameofrecoveryimage>
I reached the fastboot part, but when i type in "fastboot flash recovery (file name) it says it cannot load file name...
What is the proper file that I should use? Running 4.04 YAKJU looking to just recover the phone back or switch to jelly bean, whichever is easier. (jelly bean if they are both the same)
okay okay okay, i think im almost there...got a rom and extraced it, i know how 4 files:
Boot 4,148KB
Recovery 4,478 KB
System 316,112 KB
Userdata 137,555 KB
Which one do I put for fastboot oem recovery (fileimagename)
Thanks
Stuck on Google screen
Background: GN is unclocked and rooted. I've had quite a few devices and have rooted them all and run custom ROMs. I am fairly familiar with all of the tools needed, but by no means an expert. I have the Android SDK with adb and fastboot installed on my Win 7 x64 machine as well as the samsung drivers. I loaded a Jelly Bean ROM the day after it was announced at Google I/O and ran it for awhile before I started having touchscreen issues. I removed the battery and restarted the phone and had no problems for about a week or so.
Problem: I started having touchscreen problems again, but figured it was perhaps due to the early version of JB that was ported over from the GSM version (I believe). I tried a few other versions that were released later and they would work for a few days and then the touchscreen issue would pop up again. At this point I started thinking it might be a hardware problem because if I twisted the phone (weird, but it worked) the touchscreen would respond. I flashed another version of the Jelly Belly ROM yesterday (//rootzwiki.com/topic/28677-rom-jelly-belly-v33-07122012-jellybean-411-pure-aosp-its-all-about-speed/") to see if it would work by chance. Unfortunately, I still encountered the touchscreen problem. After rebooting a few times my GN started bootlooping and would not load into Android.
Actions: At this point I tried to recover from a backup, but much to my dismay it failed (don't remember exact error). I tried a few other backups with no luck. I tried reflashing another ROM, no luck. Then I started seeing some errors when booting into recovery (E: can't mount cache/recovery/log. Around this time I also noticed I was getting errors with sdcard. I decided to take the phone back to stock using the verizon ICL53F factory image. I tried via numerous toolkits (Odin, Galaxy Nexus Toolkit and directly from fastboot) and have been unsuccessful. I've searched every forum and have literally tried everything I with no luck. I can flash new recoveries, but it doesn't solve my problem. Right now phone is back to stock with stock recovery and just bootloops at the Google screen.
I assume my phone is completely hosed, but am hoping someone might know something I don't and might be able to help me restore this phone.
Edit: I tried flashing an imm76k factory image via fastboot and was finally able to get in. I must have had a bad icl53f factory image...close call.
Hello.
This is my girlfriend's Galaxy Nexus SC-04D(NTT Docomo).
This is the 7th SC-04D that I've played around with.
So I did the usual stuff.
Unlocked bootloader, rooted it, sim-unlocked the phone, installed AOKP and all went well.
While finding some apps at the Play Store, the phone suddenly hanged.
Then the display dimmed and some weird lines appeared.
So I forced shutdown the phone.
After that, phone won't reboot.
I can enter bootloader and download mode.
But, recovery is gone.
I can not flash a custom recovery as well, but I can enter it temporarily using the GNex toolkit.
Attempting to clear cache or factory reset was futile, everything is not mounted, and won't allow me to do so using cwm.
As I can enter download mode, I also tried flashing stock google image, but odin crashes when flashing it.
I also tried OMAP flashing, but gets stuck at:
ยป Sending data (131072 bytes) ::::::::::.......... [65536]
Can anyone help me on this?
I really have no idea what caused this as well.
As I mentioned, this is the 7th GNex(mine and friends') that I've played around with.
And has always been customizing since my Galaxy S days.
I'd appreciate anybody's help
Here's another weird thing.
I used the GNex Toolkit to relock the bootloader.
Operation is successful.
However, after restart, fastboot status goes back to UNLOCKED.
lemmy_0 said:
Here's another weird thing.
I used the GNex Toolkit to relock the bootloader.
Operation is successful.
However, after restart, fastboot status goes back to UNLOCKED.
Click to expand...
Click to collapse
Don't trust toolkits, read the stickies and do the whole thing manually.
Swype'ed on my CM10 Galaxy Nexus
hi thanks for the reply.
I did it manually as well.
even flashed a boot and radio image with it.
however, after reboot, it goes back to having no boot or recovery image, baseband is unknown and bootloader unlocked.
Your problem is like this? img843.imageshack.us/img843/8599/img0068ar.jpg
The my too
nope, mine can't boot
A week or so after upgrading from Pacman v15 to v15.3 I began having my phone drop into roaming for a really long time. I restarted my phone to see if it would fix the issue, and I got a bootloop, nothing past the white HTC screen I had issues flashing to fastboot, so I got a new unlocktoken and now I can flash. At least... it will send, write, and "okay" me on it, but then nothing will work. I will "successfully" flash a recovery (i've tried twrp and cwm) and then when I try and get into them through bootloader it just sends me on the same old bootloop.
Please help... I guess I should flash an RUU but I've never done that before, and I'm curious as to whether or not this will even work since nothing else is "taking."
UPDATE... DL'ed the RUU and followed directions of...
flashing recovery_signed.img
fastboot oem lock
then running RUU in fastboot usb.
Everything SEEMED to take fine, and then when I go to reboot I get a loop again. grr...