I'm the [almost] happy owner of a Defy whose digitizer, from time to time, stops working or goes crazy.
The "goes crazy" part it's obvious and it only happens in Angry birds. The game keeps on zooming in and out like, beside the finger that I am putting on the screen, there's an invisible one that shifts on the screen. Seems to be app related as this doesn't seem to happen in any other app.
On the other hand, from time to time, the digitizer seems to stop out of nothing. I haven't noticed any particular pattern on this but it might be driver/app dependent too.
Both of these situations are resolved with a blanking of the screen (top button).
Does anybody else have this kind of problems? Any idea where is the problem?
PS: If I get any more patterns I'll get back.
Yes, very rarely. Screen will not respond and have to time out screen and then it's fine. Usually happens while on charger.
I have trouble with most multi-touch games. After a while, the screen stops responding. Sometimes if I release my touch temporarily it will work again, but by then I'm dead or have crashed Not sure if it's just my fingers sweating onto the screen or something!!
I tried the multi-touch tester app in the market, and it tracks two touches without a problem; so it only seems to happen during games.
eg
Gun Bros
Mini Squadron
The multitouch tester also does the bug. Just try to simulate playing in the tester and you'll see sometimes one finger not responding. But I think there are very few phones with perfect touch screen for playing games. So not a big bug for me.
Hi all!
I hope someone could help me,
My Desire Z touchscreen works weird, sometimes it does 2 unusual things:
-sometimes when trying to scroll it will zoom in or out like there is another finger there but there is not. If i run pointer location test, then it shows there is screenpress in the middle, but im not pressing it. the only way to fix it is to turn off the screen then turn back on.
-other times, the problem is similar, about 1/4 of the touchscreen in the middle/horizontal does not recive input. And the whole screen wont recognize touch correctly.
The problem happens mostly -but random- when i play games, or read pdf!
Is this problem related to the digitizer? I have tried more ROMs, the same problem. Not charging, no screen protector on the device, no break on glass.
Thanks in advance
I have a question for all of you FPSE players out there have you tried it with your Galaxy Nexus yet?
I can't seem to get the on screen analog controllers to work. The touch control needs to be calibrated or something. When I put my finger on the screen the sick is not centered on my finger where i'm pressing. Is anyone else having this issue? Also I can't seem to get screen filtering to work with out fast draw on.
If there is anyone out there that has it working fine can you send me your config.ini file so I can look at some of the differences?
Hi all.
My wife's s4 mini started to play up, 1/4 of the touch screen from the bottom has stopped working. this means she cannot assess app tray, call log etc.
the screen itself looks fine and all other parts are responsive to touch.
I manage to reset the phone by turning it sideways to assess all the keys but this has not solved the issues.
Do I need a new screen or can this be repaired?
thanks
Maybe it's just me, but I couldn't figure out how to set a screen timeout. I saw threads about screensaver, etc. but never came across a post about telling how to make the HU turn off the screen automatically and stay like that. There is a legend about Android being configurable, but this is killing it for me.
I know there is several ways to do it manually like long pressing the Mute(thx to Wolf Hamburg) or trying to locate the incredible small on screen button, which I find even more stupid and dangerous than texting in the car. But besides it's far from being comfotable, there are a few more issues which I should face when the screen is off. First it will turn back on seemingly random. It will turn back on if I change the volume, not like on my phone. To avoid this I tried to activate the speed dependent volume control, at most it could have been a workaround, but it was malfunctioning as well...(after 5 sec you switched off the screen it will set the safe volume, then turn back on the screen, if you retry it might work for some time after the second try).
What I'm looking for is a very basic functionality which works with every android phone I know: set a screen timeout (15-30 sec) and being able to change the volume without lighting up the display.
I would be really thankful for a solution!
p.s.: I already tried to switch off the stay always on in the debugger menu, without any effect :\
That bothers me too, specially screen coming back on volume change.
Hope someone develop a solution.
dejdo said:
Maybe it's just me, but I couldn't figure out how to set a screen timeout. I saw threads about screensaver, etc. but never came across a post about telling how to make the HU turn off the screen automatically and stay like that. There is a legend about Android being configurable, but this is killing it for me.
I know there is several ways to do it manually like long pressing the Mute(thx to Wolf Hamburg) or trying to locate the incredible small on screen button, which I find even more stupid and dangerous than texting in the car. But besides it's far from being comfotable, there are a few more issues which I should face when the screen is off. First it will turn back on seemingly random. It will turn back on if I change the volume, not like on my phone. To avoid this I tried to activate the speed dependent volume control, at most it could have been a workaround, but it was malfunctioning as well...(after 5 sec you switched off the screen it will set the safe volume, then turn back on the screen, if you retry it might work for some time after the second try).
What I'm looking for is a very basic functionality which works with every android phone I know: set a screen timeout (15-30 sec) and being able to change the volume without lighting up the display.
I would be really thankful for a solution!
p.s.: I already tried to switch off the stay always on in the debugger menu, without any effect :\
Click to expand...
Click to collapse
pczao said:
That bothers me too, specially screen coming back on volume change.
Hope someone develop a solution.
Click to expand...
Click to collapse
This isnt normal Android, its been modified to work with car head unit components in a car stereo and the Chinese devs have, annoyingly, done it so that ANY screen press, even volume changes, turns on the screen. Theoretically it shouldnt be too hard to change, just a case of searching for the code and of course there will also be some sort of interaction with the MCU. You could try looking in the build prop if your unit is rooted.
If you have a Klyde unit with hard buttons, holding down mute will turn the screen off, this may work on others too.
dejdo said:
Maybe it's just me, but I couldn't figure out how to set a screen timeout. I saw threads about screensaver, etc. but never came across a post about telling how to make the HU turn off the screen automatically and stay like that. There is a legend about Android being configurable, but this is killing it for me.
I know there is several ways to do it manually like long pressing the Mute(thx to Wolf Hamburg) or trying to locate the incredible small on screen button, which I find even more stupid and dangerous than texting in the car. But besides it's far from being comfotable, there are a few more issues which I should face when the screen is off. First it will turn back on seemingly random. It will turn back on if I change the volume, not like on my phone. To avoid this I tried to activate the speed dependent volume control, at most it could have been a workaround, but it was malfunctioning as well...(after 5 sec you switched off the screen it will set the safe volume, then turn back on the screen, if you retry it might work for some time after the second try).
What I'm looking for is a very basic functionality which works with every android phone I know: set a screen timeout (15-30 sec) and being able to change the volume without lighting up the display.
I would be really thankful for a solution!
p.s.: I already tried to switch off the stay always on in the debugger menu, without any effect :\
Click to expand...
Click to collapse
Today; Is there any solution for this to turn off the screen automatically? I'm looking at lots of posts without finding anything. I hope someone can help me. I have Android 6.0.1 Mashmallow.
I use this app, activated by my SWC. Only minor issue is that you have to tap screen to turn on. Screen stays off during volume changes.
https://play.google.com/store/apps/...toff&rdid=com.cygery.screenbacklightoff&pli=1