Related
Update: Saw some reports about Cyanogen fixing Canadian LTE issue in his latest CM10 build! Now to wait for AOKP JB to follow suit.
Hey Guys,
So I've been hearing a lot of Canadian LTE Issues on JB Roms such as CM10 and AOKP JB. Although I did have 4G (LTE) on CM10 when I first flashed it, straight from AOKP ICS no data wipe just Cache & Dalvik, my 4G icon disappeared after a couple hours so I thought I was subject to the same issue as all the other Canadians. Not a big deal, JB outweighed having LTE at least for now.
Since AOKP JB was just released last night (Can't thank you guys enough Task + Ktoonsez), I immediately jumped back on AOKP (JB) and happy to report that I do have LTE working on a Canadian carrier (Rogers).
I didn't do anything special, although slightly risky, I'm sure if it works for me it will work for you. Just to be clear, I'll run you guys through my exact steps:
1) I started on CM10.
2) CWM recovered back to AOKP ICS (I did this just to see if my LTE was still working on AOKP, it was.)
3) Did all my pre-Flash setup (Titanium Backup, SMS/Whatsapp backup).
4) Nandroid of course.
5) Clear Cache/Dalvik (I know Task said to do a full Wipe, but I ran into no issues from AOKP ICS -> CM10 without Data wipe, so I took the risk for AOKP ICS -> AOKP JB too, so far no issues.)
6) Flashed AOKP JB (I assume this would work the same for CM10 too.)
7) Flashed JB GAPPS (and then JB Inverted GAPPS )
8) Reboot.
That's it really. Im still running amazing on AOKP JB, no issues so thank you Task and Ktoon, you guys do amazing work.
As a final note: I am extremely sorry if you run into any bugs with the JB Roms, a Full Wipe is ALWAYS recommended if you run into unexpected bugs. Also, if you experience boot loops, then that's what the Nandroid is for. Of course most people are running these JB Roms as a Daily Driver, they really are that good. But, keep in mind they are also still considered "Previews" so don't expect 100% functionality.
Plus most importantly, this is just a procedure to get LTE working on JB Roms for Canadian phones, if you run into any other errors then you probably should start clean, you have been warned.. I've only been running AOKP JB for a couple hours now, but I can say I haven't noticed any issues at all yet + LTE with a Rogers phone.
TLDR - How to get LTE working on Jellybean Roms, on Canadian S3 (I747M)
Warning: This Method utilizes a No Data-Wipe Flash, use this at your own risk. But, ATM, this is probably the only way to get LTE on JB for Canadian Carriers/S3s until the Network Preference Setting is implemented.
1) Start from an AOSP ICS ROM where you had LTE working. Recover back or flash an AOSP ICS Rom. (This is important as I don't recommended a Non-Wipe flash from a Non-AOSP Rom to an AOSP Rom, especially ICS -> JB)
2) Make sure you have your LTE APN set for your Canadian carrier.
3) Make sure you set Network Mode: LTE Preferred
4) Nandroid!
5) Wipe Cache
6) Wipe Dalvik Cache
7) Flash AOKP JB or CM10
8) Flash GAPPS
9) Reboot
There you have it, it worked for me and I sincerely hope it works for all of my fellow Canadians as well!
Good luck everyone!
all of this...
5) Wipe Cache (x3)
6) Wipe Dalvik Cache (x3)
is useless and unnecessary just so you know. it does absolutely nothing. just saying.
task650 said:
all of this...
5) Wipe Cache (x3)
6) Wipe Dalvik Cache (x3)
is useless and unnecessary just so you know. it does absolutely nothing. just saying.
Click to expand...
Click to collapse
Haha np, I figured as much! But, it's what I did, just for good measure. Thank for the clarification, good to get one from a Pro Dev. I'll edit the OP. :highfive:
Your TLDR is almost as long as your original post... but thanks! :good:
GalaxysHeart said:
Your TLDR is almost as long as your original post... but thanks! :good:
Click to expand...
Click to collapse
Haha true that, I wrote the TLDR and rambled on again.
Let me fix it again... :fingers-crossed:
It works.
Cheers.
Now, the only problem would be if I wanted to switch between 3G, H+, and LTE, would I lose LTE until I flash to ICS and back?
This needs some further testing.
Sent from my SAMSUNG-SGH-I747 using xda premium
Oddly enough, LTE was working the first time I flashed 7/25 CM10, but when I wiped and flashed again, the network types menu disappeared. I can still manage to change the network mode to lte temporarily I'm the *#*#4636#*#* menu, but the setting doesn't stick and it goes back to WCDMA preferred on a reboot.
Any other Canadians still experiencing problems with LTE and the latest CM10?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Finally convinced myself to install JB, and I've got LTE working on a clean install.
As usual, just add the Rogers LTE APN.
After a reboot, my 4G symbol was back, and I've confirmed LTE speeds of 24/22 (not bad).
Here's the info:
APN - ltemobile.apn
MMSC - http://mms.gprs.rogers.com
MMS proxy - 10.128.1.69
MMS port - 80
APN type - *
All other values are left as default.
GalaxysHeart said:
Finally convinced myself to install JB, and I've got LTE working on a clean install.
As usual, just add the Rogers LTE APN.
After a reboot, my 4G symbol was back, and I've confirmed LTE speeds of 24/22 (not bad).
Here's the info:
APN - ltemobile.apn
MMSC - http://mms.gprs.rogers.com
MMS proxy - 10.128.1.69
MMS port - 80
APN type - *
All other values are left as default.
Click to expand...
Click to collapse
I tried your method, i was able to get lte speeds on AOKP ICS but when I went over to AOKP JB without a wipe I lost my LTE speeds, it just stayed on 3G. What could I have missed?
Not sure if this will help, but when I upgraded from a previous cm10 build to the current without wiping, my existing lte APN (that I added before) would not pick up; I'd select it and it would automatically switch back to the default rogers APN.
I fixed the problem by adding another lte APN (different name than the existing one, named "lte") and it worked. I used the same settings above, with the exception of "apn type", which I did not set.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I just tried creating a duplicate lte apn on AOKP after doing a full wife from stock. no luck. still no lte after reboot.
There must be a cause for this problem. Without figuring that out, it will be harder to find a solution.
I wish I could use CM10 or AOKP. I find that my connection has trouble staying even on H and usually reverts to 3g.
Oh well.
@OP
Curious to ask which AOKP build did you use when you dirty flashed and have you experimented with some of the later builds
bakasam said:
@OP
Curious to ask which AOKP build did you use when you dirty flashed and have you experimented with some of the later builds
Click to expand...
Click to collapse
Hey Bakasam, sorry for the late reply. I've successfully "dirty flashed" every AOKP JB build one after the other since the beginning keeping LTE along the way. I have noticed that it is still possible to lose LTE while on AOKP from the following:
1) Flashing Ktoon's kernel caused me to lose LTE.
2) Turning on Navigational Softkeys from Rom Control + Reboot caused me to lose LTE.
Still, as long as you have a working version of a JB AOSP rom (CM10 or AOKP) with LTE on, so far it has seemed safe to dirty flash over without problems. Keep note I have not tweaked my phone's system settings much so maybe that's why it has been so safe.
realist123 said:
I just tried creating a duplicate lte apn on AOKP after doing a full wife from stock. no luck. still no lte after reboot.
There must be a cause for this problem. Without figuring that out, it will be harder to find a solution.
I wish I could use CM10 or AOKP. I find that my connection has trouble staying even on H and usually reverts to 3g.
Oh well.
Click to expand...
Click to collapse
If you want LTE on AOKP JB, you're gonna have to follow my instructions in the OP and not do a "full wipe". I haven't flashed CM10 since the first build, so I can't confirm if it has the Network Preferences setting to set LTE. Most likely, the problem isn't APN for Canadian phones, it's the fact that we are missing the Network Preferences option (at least in AOKP we still are, not sure about CM10.)
sm00nie said:
Not sure if this will help, but when I upgraded from a previous cm10 build to the current without wiping, my existing lte APN (that I added before) would not pick up; I'd select it and it would automatically switch back to the default rogers APN.
I fixed the problem by adding another lte APN (different name than the existing one, named "lte") and it worked. I used the same settings above, with the exception of "apn type", which I did not set.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
If you followed the OP steps, by not full wiping (dirty flash), I'm not sure why you would have to touch APN settings at all? For me I haven't even touched the Networks setting section ever, but I'll still have LTE (because my LTE APN was selected before the dirty flash in the previous build).
Latty said:
Oddly enough, LTE was working the first time I flashed 7/25 CM10, but when I wiped and flashed again, the network types menu disappeared. I can still manage to change the network mode to lte temporarily I'm the *#*#4636#*#* menu, but the setting doesn't stick and it goes back to WCDMA preferred on a reboot.
Any other Canadians still experiencing problems with LTE and the latest CM10?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I'm planning to flash back to CM10 to check it out either this build or the next, I'll let you know how it goes. EDIT: Flashed 8/10 CM10 and indeed there is the "Network Preferences" option and choosing LTE gave me LTE fine. Looks to be good on CM10, now hopefully AOKP follows eventually..
just an update.
I've managed to get LTE working on the latest CM10 build (8/8 v3). All I had to do was change some APN settings and it works! I did a clean install with the ROM.
I ran it all day and did lose data at one point. I just had to turn off and on LTE in the bearer option and it was back again.
LTE works great on CM10, (08/10) , i noticed CM10 has Network Mode , hence why LTE works great.I switched to CM10 after being with AOKP since Captivate days.
Just to give an update, i asked Task650 to see if there are any plans to add "Network Mode" and he did not confirm mentioning the AOKP ROM currently only supports AT&T, so for the time being, if you are in Canada and like your LTE, try CM10, i have been running it since Friday with no issue.
edit: nm sorry ahh
I was having this issue with the AOKP rom and I missed the option to select from the Network settings for LTE. CM10 is much better as there is a configuration option I can select in the notification drawer to turn on or off LTE. Works great on my Telus Galaxy S3.
I fixed the issue when I stop using AOKP since all other roms worked fine on my phone even with all ATT roms..
Sent from my SAMSUNG-SGH-I747 using xda premium
Raul77 said:
Just to give an update, i asked Task650 to see if there are any plans to add "Network Mode" and he did not confirm mentioning the AOKP ROM currently only supports AT&T, so for the time being, if you are in Canada and like your LTE, try CM10, i have been running it since Friday with no issue.
Click to expand...
Click to collapse
I asked that question long time ago, and his answer was very arrogant and condecendent as far as us being in Canada. Something like "if you want LTE to work develop your own ROM", reason why I stopped using the ROM, any other ROMS work just fine.. with LTE and Network Mode...
Currently very happy with http://forum.xda-developers.com/showthread.php?t=1889449 and Ktoonz Kernel .. very good battery life lots of features.. in both ROM and ktoonz kernel
* Unfortunately, I'm having the same problems with this ROM on HSDPA that I was having on aeroevan's ROM. GSM is found immediately on boot, however, HSDPA is very flakey. It will succeed in connecting every now and again, but then randomly drops the signal and won't reconnect. I thought maybe I just had a weak 3G signal where I was testing, but I have a BB Bold for work as well and that can easily maintain a 3G connection on the same network. I also had no problem way back in the day with CM7.2, but that ship has sailed .
Also, when the phone is in WCDMA preferred mode, after a while the phone will lose all connections (usually after a reboot but not always), including to GSM and when I go to reselect my network operator I get the message "Error while searching for networks". No matter how many times I reboot the phone or switch to "GSM Only" or "GSM/WCDMA auto" it never lets me again select my network provider.
As I said, I ran into the same problems with aero's port, so its not specific to this ROM.
* Situation are me after uproom (http://forum.xda-developers.com/showthread.php?t=1932573), spent two days lost wave, down to the original room (fullwipe finished down about 2.3.4). So lose the 3G network always in global mode (global), 3G users they will never be, but 2G ok (you spend vina sim and have installed APV vina). The physician who has experience helping hand factories. Thank a lot.
I don't known?
I do not understand.Specific guidance for me? please!
nabin229 said:
I do not understand.Specific guidance for me? please!
Click to expand...
Click to collapse
Aeroevan's rom? CM9, CM10? Is your radio outdated? What carrier are you on? More info = more help.
nabin229 said:
Situation are me after uproom (http://forum.xda-developers.com/show....php?t=1932573), spent two days lost wave, down to the original room (fullwipe finished down about 2.3.4). So lose the 3G network always in global mode (global), 3G users they will never be, but 2G ok (you spend vina sim and have installed APV vina). The physician who has experience helping hand factories. Thank a lot.
Click to expand...
Click to collapse
BTW, I don't understand this part.
I would suggest reading through the entire thread of Aeroevan's rom that you were describing as well as the Global CM9 thread. During your reading you may find and answer in there. I have found more answers that way than waiting on someone to direct me there anyway. That is all the advice I can provide with my limited knowledge.
Help me
ThePhantom97 said:
Aeroevan's rom? CM9, CM10? Is your radio outdated? What carrier are you on? More info = more help.
BTW, I don't understand this part.
I would suggest reading through the entire thread of Aeroevan's rom that you were describing as well as the Global CM9 thread. During your reading you may find and answer in there. I have found more answers that way than waiting on someone to direct me there anyway. That is all the advice I can provide with my limited knowledge.
Click to expand...
Click to collapse
I installed your room ( {Rom}{ICS} Official Global CM9), after 2 days my phone is not network. I reinstall the original room 2.3.4 but only use 2G when I used dataroaming; completely unusable 3G & network global mode always (I fullwipe data before reinstalling room 2.3.4 & APN properly installed).I then set your room again, but as I said above condition.Please help me how to be able to use 3G
because my phone is example:
Unfortunately, I'm having the same problems with this ROM on HSDPA that I was having on aeroevan's ROM. GSM is found immediately on boot, however, HSDPA is very flakey. It will succeed in connecting every now and again, but then randomly drops the signal and won't reconnect. I thought maybe I just had a weak 3G signal where I was testing, but I have a BB Bold for work as well and that can easily maintain a 3G connection on the same network. I also had no problem way back in the day with CM7.2, but that ship has sailed .
Also, when the phone is in WCDMA preferred mode, after a while the phone will lose all connections (usually after a reboot but not always), including to GSM and when I go to reselect my network operator I get the message "Error while searching for networks". No matter how many times I reboot the phone or switch to "GSM Only" or "GSM/WCDMA auto" it never lets me again select my network provider.
Ok, I don't know if anyone else is having the same problem as you. I hope I don't offend you but I am going to take a guess and say that english is not your first language as some of that is difficult for me to read and completely understand. From what I am gathering is you can connect to your carriers network but only on a temporary basis. Here are the steps I followed to connect to Verizon's network using {10-25-2012}{Rom}{ICS} Official Global CM9 - After a full wipe and clean install and after initial setup I went to (doing this from memory as I don't have it installed at the moment) Settings --> More --> Mobile Networks --> chose CDMA w/EVDO --> Exit out of settings and rebooted. When the phone booted up it recognized the Verizon network and all service and data was all working, I didn't have to change the APN settings at all. If you are still having trouble staying connected I suggest you check the version of radio you are using and consider updating it. Here is the radio thread: http://forum.xda-developers.com/showthread.php?t=1134451 I don't think I am the best person to assist you but just telling you what I would do if I were in your situation.
3G disconnect, only use 2G (GSM). Help me!
ThePhantom97 said:
Ok, I don't know if anyone else is having the same problem as you. I hope I don't offend you but I am going to take a guess and say that english is not your first language as some of that is difficult for me to read and completely understand. From what I am gathering is you can connect to your carriers network but only on a temporary basis. Here are the steps I followed to connect to Verizon's network using {10-25-2012}{Rom}{ICS} Official Global CM9 - After a full wipe and clean install and after initial setup I went to (doing this from memory as I don't have it installed at the moment) Settings --> More --> Mobile Networks --> chose CDMA w/EVDO --> Exit out of settings and rebooted. When the phone booted up it recognized the Verizon network and all service and data was all working, I didn't have to change the APN settings at all. If you are still having trouble staying connected I suggest you check the version of radio you are using and consider updating it. Here is the radio thread: http://forum.xda-developers.com/showthread.php?t=1134451 I don't think I am the best person to assist you but just telling you what I would do if I were in your situation.
Click to expand...
Click to collapse
my phone 3G is disconnect, only use 2G (GSM) , rom 2.3.4 Verizon, radio 1.09.01.0312. *I'm from Vietnam, I speak English not good, sorry.
nabin229 said:
my phone 3G is disconnect, only use 2G (GSM) , rom 2.3.4 Verizon, radio 1.09.01.0312. *I'm from Vietnam, I speak English not good, sorry.
Click to expand...
Click to collapse
No need to apologize m8. Hopefully someone more advanced than myself can assist you with your issue. I am sorry that I couldn't be of more assistance.
Trouble with wifi/3G
ThePhantom97 said:
Ok, I don't know if anyone else is having the same problem as you. I hope I don't offend you but I am going to take a guess and say that english is not your first language as some of that is difficult for me to read and completely understand. From what I am gathering is you can connect to your carriers network but only on a temporary basis. Here are the steps I followed to connect to Verizon's network using {10-25-2012}{Rom}{ICS} Official Global CM9 - After a full wipe and clean install and after initial setup I went to (doing this from memory as I don't have it installed at the moment) Settings --> More --> Mobile Networks --> chose CDMA w/EVDO --> Exit out of settings and rebooted. When the phone booted up it recognized the Verizon network and all service and data was all working, I didn't have to change the APN settings at all. If you are still having trouble staying connected I suggest you check the version of radio you are using and consider updating it. Here is the radio thread: http://forum.xda-developers.com/showthread.php?t=1134451 I don't think I am the best person to assist you but just telling you what I would do if I were in your situation.
Click to expand...
Click to collapse
I have been having the same problem. Flashed CM10 after full wipe, mobile network (for verizon) is CDMA w/EVDO, tried rebooting and switching and wiping and re-flashing but I have no wifi and bad 3G. When I revert to stock everything is fine. How can I fine the latest radio for CM10, I didn't see any JB in the thread link.
SS823 said:
I have been having the same problem. Flashed CM10 after full wipe, mobile network (for verizon) is CDMA w/EVDO, tried rebooting and switching and wiping and re-flashing but I have no wifi and bad 3G. When I revert to stock everything is fine. How can I fine the latest radio for CM10, I didn't see any JB in the thread link.
Click to expand...
Click to collapse
The latest is the ICS radio .320 it will work on JB roms as well.
Have you guys flashed the new ics firmware?
I'm so fresh you can suck my nits...
This thread is a place for people to ask questions and get answers about CM 10.1 Nighty and Official when it comes out. This thread is the proper place for these kind of questions for now.
Link to CM 10.1 Nightly
http://jenkinsmanifest.clockworkmod.com/device/d2att/all
CM 10.1 Changelog credit lisek99
http://10.1.cmxlog.com/?device=d2att
4.2 GAPPS Credit Mike Ramsay
http://goo.im/devs/itsmikeramsay/gapps-jb-20121212-signed.zip
Ktoonsez 4.2 Kernel
http://forum.xda-developers.com/showthread.php?t=1871946
CyanogenMod's Progress
http://review.cyanogenmod.org/#/q/status:merged,n,z
itsmikeramsay's rendition of CM 10.1
http://forum.xda-developers.com/showthread.php?t=2039995
It has "..a few cherry-picks. We're shooting for that sweet spot between CM10.1 and AOKP."
Euroskank CM 10.1 kang d2att
http://forum.xda-developers.com/showthread.php?t=1806921
has cherry picks as well
Common Flash Process
1. wipe cache/dalvik
2. wipe system
3. factory reset
4. wipe data
5. TWRP users wipe internal-wipes internal data that could corrupt something
6. flash rom
7. flash gapps
Do this if you have any unexpected problems.
If you want flash ktoonsez kernel but if you have problems follow the flashing procedure before posting about problems/questions
Possible Data Fix
Alright, for anyone having issues with the CM10.1 "pre-release" builds (official or otherwise) not allowing you to keep a connection, here's how to fix it:
Download one of the modem files for your device (read!) in the OP of the modem thread. Any of the options will work, pick the one you want.
Keep that ZIP on your EXTERNAL storage. You need to be able to find it from CWM/TWRP.
With CM10.1 running, disable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (uncheck it)
Reboot into recovery. (Long-press Power, "Reboot", "Recovery", [OK])
Flash the modem from step 1.
Clear Cache and Dalvik Cache.
Reboot back into CM10.1.
Wait 30 seconds!
Enable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (check it).
You should have data within 10-20 seconds!
If this doesn't work, you might need to reset your APNs to default. This will only happen if you make changes to your APNs, so go into the APN list and press the menu key and hit "Reset to defaults". Then start over at step 1.
To prevent this problem, you should disable data before shutting off your device. You can enable it 30 seconds after boot and it should work again. If you get stuck in the "disconnect-loop", repeat these steps.
Themes
Sense 4 10.1 theme (might work for other roms)
http://forum.xda-developers.com/showthread.php?t=2051326
My dataaa, oh my dataaaa.
I almost have everything working, however I can't seem to get my 4G data to work.
khep24 said:
I almost have everything working, however I can't seem to get my 4G data to work.
Click to expand...
Click to collapse
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?
smelenchuk said:
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?
Click to expand...
Click to collapse
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks
khep24 said:
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks
Click to expand...
Click to collapse
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).
smelenchuk said:
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).
Click to expand...
Click to collapse
There it goes , that did the trick thanks for the help. Now my GS3 is working perfectly with the update.
Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7
sliverboyx2002 said:
Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7
Click to expand...
Click to collapse
I'm going to offer the same suggestions: check your APN settings (that seems to be the big one for AT&T) and check your network types.
I assume you've had LTE coverage under other ROMs?
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Everything installs fine,....but the google play store gives me a "no connection" error....but browsing the internet works fine. I followed all the steps exactly.
zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Are no files displayed at all or is it just displaying differently? Once I updated, it moved all my files to the folder/0. Check there and it should display your folders as on 4.1. I believe it has to do with the multiple user functionality.
Sent from my Nexus 7 using xda app-developers app
When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium
zap12341 said:
When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I can't see any folders either. Same ROM.
Sent from my SAMSUNG-SGH-I747 using xda premium
zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Its a preview. Its not supposed to work. The preview I released is basically just a screenshot of what's to come. I haven't even release a full ROM yet.
Emoticons
The emoticons are now implemented in the keyboard, is there a way to flash em over or download em. If anyone else has this issue let me know.
I can't get Portable Wi-Fi hotspot to work?
any ideas, has anyone else tried it?
is there a way to submit bug reports for nightly builds?
no data connection at all now via the radio.(but the phone can receive & make calls) I followed the steps to check it as posted by another user above....but still tryin different modem files.
did you try the fix in the op?
CM10.1 on Bell Galaxy SIII
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.
wujiku said:
did you try the fix in the op?
Click to expand...
Click to collapse
Ya that's what I've been working on. I finally did get it working (for now) with the modem 3rd down on the list.
Does CM10.1 have a LTE icon that appears when LTE is being used, or does it always just say "4G"?
---------- Post added at 06:48 PM ---------- Previous post was at 06:39 PM ----------
ebfortin said:
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.
Click to expand...
Click to collapse
This is getting to be my experience. I just tried a few different modems, and finally got it to work...then I decided to reboot...and it stopped working. A few reboots later, and it still is down for the count. I guess I'll try another modem.
Hello I bought my phone off of ebay it was already flashed with tasks rom when I got it and the only problem I have which is very annoying is that it constantly switches from LTE/GSM/CDMA to CDMA only when I goto settings>more>mobile networks...Whenever there is no signal it is set to CDMA only I'm not sure what the problem is but its very frustrurating when I cant make calls when I need to...Is this a known problem? Will I have to revert back to stock?
n023b said:
Hello I bought my phone off of ebay it was already flashed with tasks rom when I got it and the only problem I have which is very annoying is that it constantly switches from LTE/GSM/CDMA to CDMA only when I goto settings>more>mobile networks...Whenever there is no signal it is set to CDMA only I'm not sure what the problem is but its very frustrurating when I cant make calls when I need to...Is this a known problem? Will I have to revert back to stock?
Click to expand...
Click to collapse
who is your carrier and what APNs are installed? also, you're in a GSM forum
xBeerdroiDx said:
who is your carrier and what APNs are installed? also, you're in a GSM forum
Click to expand...
Click to collapse
My carrier is Fido (GSM) its the same as at&t in the US or Rogers in Canada
By APNs do you mean Access Point Names? If so there are three options
Fido Default
fido-core appl1.apn which is the one I use since I use LTE
Fido Internet
internet.fido.ca
Fido tethering
isp.fido.apn
n023b said:
My carrier is Fido (GSM) its the same as at&t in the US or Rogers in Canada
By APNs do you mean Access Point Names? If so there are three options
Fido Default
fido-core appl1.apn which is the one I use since I use LTE
Fido Internet
internet.fido.ca
Fido tethering
isp.fido.apn
Click to expand...
Click to collapse
Fido's website says to use LTEMOBILE.APN if you have an LTE device
http://www.fido.ca/web/content/phonewarranty/configure_unlocked_device_guide&lang=en
xBeerdroiDx said:
Fido's website says to use LTEMOBILE.APN if you have an LTE device
http://www.fido.ca/web/content/phonewarranty/configure_unlocked_device_guide&lang=en
Click to expand...
Click to collapse
Just checked although its named after the core one it has the LTE settings I've been using LTE fine
Even though the settings were the same I still made a new profile for LTE and its having the same problems Sometimes toggling airplane mode or restarting the phone seems to fix it
Again the problem is that the phone constantly loses signal and the mobile network setting says "CDMA only" if I change it back to LTE/GSM/CDMA sometimes the signal will come back
n023b said:
Even though the settings were the same I still made a new profile for LTE and its having the same problems Sometimes toggling airplane mode or restarting the phone seems to fix it
Again the problem is that the phone constantly loses signal and the mobile network setting says "CDMA only" if I change it back to LTE/GSM/CDMA sometimes the signal will come back
Click to expand...
Click to collapse
the fact that your gsm device has built in options for cdma and consistently tries switching to cdma (which is probably why you lose service) tells me something needs to change. on your i747m, what is your baseband version? also, what is your android/task650 release?
xBeerdroiDx said:
the fact that your gsm device has built in options for cdma and consistently tries switching to cdma (which is probably why you lose service) tells me something needs to change. on your i747m, what is your baseband version? also, what is your android/task650 release?
Click to expand...
Click to collapse
I can't believe I forgot to mention what kind of phone it was its not the Canadian model... I bought the phone off of ebay it is an at&t SGH-I747 the phone already had the custom rom on it when I got it.
The baseband version is i747UCDLK3
Kernel version:
30.0.68-underwear kernel
[email protected] #1
Sun Mar 10
AOKP version
d2att (4.2.2 jdq39) build 3.10.2013
n023b said:
I can't believe I forgot to mention what kind of phone it was its not the Canadian model... I bought the phone off of ebay it is an at&t SGH-I747 the phone already had the custom rom on it when I got it.
The baseband version is i747UCDLK3
Kernel version:
30.0.68-underwear kernel
[email protected] #1
Sun Mar 10
AOKP version
d2att (4.2.2 jdq39) build 3.10.2013
Click to expand...
Click to collapse
oh wow, so you literally just bought that on ebay. unfortunately, when buying a device thats already rooted and running a custom ROM, you dont know the procedures used when that ROM was installed. there's a wrong and right way to do it so as to have a smooth running phone with little or no complications. I would make a backup in recovery and then try a different modem or reflash the ROM and google apps (gapps) again. is the ROM and gapps files (.zips) still on the phone?
xBeerdroiDx said:
oh wow, so you literally just bought that on ebay. unfortunately, when buying a device thats already rooted and running a custom ROM, you dont know the procedures used when that ROM was installed. there's a wrong and right way to do it so as to have a smooth running phone with little or no complications. I would make a backup in recovery and then try a different modem or reflash the ROM and google apps (gapps) again. is the ROM and gapps files (.zips) still on the phone?
Click to expand...
Click to collapse
I updated the rom the other day and had to reinstall gapps so yes I'll try flashing other radios.
I went to *#*#4636#*#* and set the radio to GSM/LTE and the phone still drops the signal and doesnt change to WDCDMA...
Edit: Update it will switch to WCDMA
n023b said:
I updated the rom the other day and had to reinstall gapps so yes I'll try flashing other radios.
I went to *#*#4636#*#* and set the radio to GSM/LTE and the phone still drops the signal and doesnt change to WDCDMA...
Click to expand...
Click to collapse
when you updated, did you perform a full wipe? that might fix this whole issue
xBeerdroiDx said:
when you updated, did you perform a full wipe? that might fix this whole issue
Click to expand...
Click to collapse
Yes I did the full wipe, cache wipe, and dalvik cache wipe.. It still has the same problem after I reflashed I'm going to try and flash different radios now.
If that doesn't work whats the next step reverting back to stock and seeing if that works?
n023b said:
Yes I did the full wipe, cache wipe, and dalvik cache wipe.. It still has the same problem after I reflashed I'm going to try and flash different radios now.
If that doesn't work whats the next step reverting back to stock and seeing if that works?
Click to expand...
Click to collapse
Did you format /system?
try unrooting and going back to stock then rerooting.
That worked for me
xBeerdroiDx said:
Did you format /system?
Click to expand...
Click to collapse
Yes I believe I did I went to the official thread and did what it said there
f_E_a_R_e_D said:
try unrooting and going back to stock then rerooting.
That worked for me
Click to expand...
Click to collapse
I'll try that but weird thing...I remember reading somewhere too many open apps may cause signal problems and I just killed all open apps when the signal dropped and about 15 secs later signal was back dont know if this was the problem for sure I'll try again if it happens see if maybe I can narrow it down to a particular app or process
Hi.
I have a Samsung Galaxy S3 T999 model on carrier T-mobile. Lately the phone has gone nuts and will get stuck on dialing out and will never make the call. Everything else works fine. Sometimes I have to soft reset, pull the battery and that will fix it for a call or two, then it will get stuck again. I have contacted T-mobile about this over 5 times and none of them can help. We tried to change the sim, reset the account. Etc and nothing. I have reset the cache, factory reset and even put in a good working sim card from another phone and the same problem comes up. During my latest troubleshooting I have narrowed it down to where I switch "network mode" to GSM only and that can make calls out all the time, but the data stays on E (which then I can't use the internet because it's so slow) When I switch back to auto I am sometimes able to place calls again, but only a few. After I test a few calls and leave the phone for a few minutes the phone will get stuck back on not making calls out and just saying "dialing".
Has anyone had the same problems or know of a fix? Currently I have been trying to flash the modem to different versions to see if that fixes the problem. The first two modems I have flashed did not work and came up with "unknown baseband".
If anyone can help I greatly appreciate it.
This is a known issue with 4.3.. What firmware are you on? Assuming you flashed the correct baseband for your device, the 'unknown baseband' message sounds like you are in 4.3 but what build? You can't flash any modems successfully less than 4.3
Sent from my SGH-M919 using Tapatalk
serio22 said:
This is a known issue with 4.3.. What firmware are you on? Assuming you flashed the correct baseband for your device, the 'unknown baseband' message sounds like you are in 4.3 but what build? You can't flash any modems successfully less than 4.3
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I was previously on 4.1.2 when the problem first started. I updated it to 4.3 and still the same problem.
jss15j.t999uvuenc2 build. (I put this one back on last night so at least I can use the phone today when I am at work)
I was just hoping that the device didn't go bad when it was on 4.1.2 because it was working just fine before the problem started.
Was it official update to NC2 by OTA/Odin or you just flashed a ROM?
Sent from my SGH-M919 using Tapatalk
serio22 said:
Was it official update to NC2 by OTA/Odin or you just flashed a ROM?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
NC2 was OTA. After doing some searches it said that OTA could of been corrupt, so I went and downloaded KIES and did a reinstall that way.
When I upgraded to 4.3 I tried that default baseband out and had the same problems. That is when I was searching on google and came across this forum and also the thread about flashing modems.
What APN (Access Point Name) are you on ? Also what is your Preferred Network Type set to ? Its located in Settings > More I think.(I don't use Stock Firmware)
Perseus71 said:
What APN (Access Point Name) are you on ? Also what is your Preferred Network Type set to ? Its located in Settings > More I think.(I don't use Stock Firmware)
Click to expand...
Click to collapse
APN is epc.tmobile.com
Network Mode current set to GSM (the only way I can make calls out without the problem occuring)
WCDMA/GSM (Auto Connect) is what it should be on so my data is at 4G, but the calls is the problem here
I am not sure but can you check the settings of the Dialer to see if there is ways to choose Lookup providers ?
Perseus71 said:
I am not sure but can you check the settings of the Dialer to see if there is ways to choose Lookup providers ?
Click to expand...
Click to collapse
Nope don't see anything in the dialer about selecting a provider..
Its supposed to be something about Choose Lookup Providers. At least that's the way it is on AOSP.
I suggest Odin flashing the stock NC2 firmware and then factory resetting from stock recovery. (Backup first of course!) If it is still an issue, it will most likely be a hardware problem. From what you have said so far, I believe that you will find this to be the case. Could've been due to damage from a drop, or even overheating at some point. Or it could just be that its simply due to hardware degradation over time.