Related
I have new hyperdrive rom while changing network mod WCDMA preferred to lte/gsm/wcdma..it goes back to again wcdma thats why have problems signal lossing n 4g lte
Sent from my SGH-I747 using xda premium
nepal1 said:
I have new hyperdrive rom while changing network mod WCDMA preferred to lte/gsm/wcdma..it goes back to again wcdma thats why have problems signal lossing n 4g lte
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Ive been having the same problem the last two weeks and no one seems to be able to help me out. The best advice I can give is to change your APN to the lte one and its supposed to work from there, people usually have the most success doing that. But it didnt help me so any other advice would be greatly appreciated.
Last time I had that issue, I created a new ATT APN and changed to it. After a reboot, the phone changed from CDMA to the LTE preferred mode.
I can't tell you if that stuck though, because I flashed another ROM the next day and never saw the issue again.
Here are some APN's you can use. I used the last one:
Name: ATT PTA
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
APN: wap.cingular
User Name: [email protected]
Password: CINGULAR1
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Auth Type: none
APN Type: internet + mms
Bearer: unspecified (unless you're in an LTE area, then select LTE)
Name: ATT Phone
APN: phone
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl
Bearer: Unspecified
This is my exact problem, I have hyperdrive which I love, but I have no LTE. I am having the same problem as OP and I have not been able to find a solution. Any help would be great!
Believe it or not, I somehow found a way to fix it for me. Now Ive literally tried everything I could find on the topic and nothing seemed to work. Kind of on a whim I decided to go to Network Operators in the settings and selected ATT, after that for some reason I was able to pick LTE/GSM/WCDMA. I disabled data, dialed *#*#4363#*#* and changed it to LTE/GSM/WCDMA and then made sure I had the right APN selected and re-enabled data, and next thing I knew 4G popped up! I hope this helps someone. I was infuriated for a few weeks without 4G and the fix was much simpler than what everyone kept telling me to do.
SpiderJames said:
Believe it or not, I somehow found a way to fix it for me. Now Ive literally tried everything I could find on the topic and nothing seemed to work. Kind of on a whim I decided to go to Network Operators in the settings and selected ATT, after that for some reason I was able to pick LTE/GSM/WCDMA. I disabled data, dialed *#*#4363#*#* and changed it to LTE/GSM/WCDMA and then made sure I had the right APN selected and re-enabled data, and next thing I knew 4G popped up! I hope this helps someone. I was infuriated for a few weeks without 4G and the fix was much simpler than what everyone kept telling me to do.
Click to expand...
Click to collapse
I tried this, but unfortunately for me it did not work :crying: Although its a little different for me since I am on Telus, but I followed the same steps and picked Telus in Network Operators. But no prevail. Hopefully I can figure something out
Same here, with rogers and not able to get LTE/WCDMA/GSM mode on the latest hyperdrive rom .13 RLS13
Back in CM10.1 I am able to get LTE signal
Any idea?
EmilyLynn said:
I tried this, but unfortunately for me it did not work :crying: Although its a little different for me since I am on Telus, but I followed the same steps and picked Telus in Network Operators. But no prevail. Hopefully I can figure something out
Click to expand...
Click to collapse
I'm having this issue in that I am only able to select the following two options, and have them stick;
GSM/WCDMA auto
GSM/WCDMA preferred (this option is currently selected).
If I try to select "LTE/GSM/WCDMA", it immediately goes back to GSM/WCDMA preferred.
I'm currently using StraightTalk on the AT&T network. I know the sim I have in the phone probably won't allow access to the LTE network (I want to get new sim cards to get LTE through StraightTalk), but I should be able to at least select that network option, and the LTE radio would scan, and find nothing.
I'm on the 9/13 nightly, stock kernel.
tokuzumi said:
I'm having this issue in that I am only able to select the following two options, and have them stick;
GSM/WCDMA auto
GSM/WCDMA preferred (this option is currently selected).
If I try to select "LTE/GSM/WCDMA", it immediately goes back to GSM/WCDMA preferred.
I'm currently using StraightTalk on the AT&T network. I know the sim I have in the phone probably won't allow access to the LTE network (I want to get new sim cards to get LTE through StraightTalk), but I should be able to at least select that network option, and the LTE radio would scan, and find nothing.
I'm on the 9/13 nightly, stock kernel.
Click to expand...
Click to collapse
You will need a new sim and it will allow you to select it. They will overnight it to you for free for 7 bucks on the website.
chrisdfw said:
You will need a new sim and it will allow you to select it. They will overnight it to you for free for 7 bucks on the website.
Click to expand...
Click to collapse
Ahhhh... So my smartphone is smarter than me in this case... Sounds about right.
chrisdfw said:
You will need a new sim and it will allow you to select it. They will overnight it to you for free for 7 bucks on the website.
Click to expand...
Click to collapse
I have to new St sim in my skyrocket and I got lte for a little bit the after connecting to wifi the network mode changed and won't go back even when not in Wi-Fi. Defaults black to wcdma on the beanstalk 4.3 rom. Not sure what to do.
Sent from my Amazon Kindle Fire using Tapatalk 2
Go back to mobile data and select the correct APN, then reboot from there. It should stick.
BAD SIMS CARD!!! Get a new one...
How do i get my 3g run 3x faster on my flashed samsung note 5 from sprint to boost. I was able to unlock it and put a boost flashed nano sim. It works but Internet sucks it runs on 3g evdo A 1xRTT. Do anybody know how to change this and make 3g run fast.
---------- Post added at 11:29 PM ---------- Previous post was at 11:23 PM ----------
kaiso said:
Go back to mobile data and select the correct APN, then reboot from there. It should stick.
Click to expand...
Click to collapse
My nano sim is boost mobile. Do i use boost APN
I have a problem with my samsung-SGH-I337 . I flashed the phone and running At&t but when I checked to the setting for changing network mode I found that the option was missing what should I do to get it back?? Help please!!
yaslife said:
I have a problem with my samsung-SGH-I337 . I flashed the phone and running At&t but when I checked to the setting for changing network mode I found that the option was missing what should I do to get it back?? Help please!!
Click to expand...
Click to collapse
You should try posting this in the AT&T S4 forums. This thread is for the S3.
Now you can
SpiderJames said:
Ive been having the same problem the last two weeks and no one seems to be able to help me out. The best advice I can give is to change your APN to the lte one and its supposed to work from there, people usually have the most success doing that. But it didnt help me so any other advice would be greatly appreciated.
Click to expand...
Click to collapse
CAP HERE !
for those that can't change the preffered network type, please follow this simple stupid step, it works, you can thank me later.
1. Turn off your phone, then remove the SIM card
2. Remove and replace the battery to make sure that your device well rebooted.
3. Dont instert the SIM Card then turn on your device
4. Go to dial, *#*#4636#*#*
5. Go to device information and change the preferred network type, make sure it can be changed and not back to the old setting.
6. Turn off your device and insert the SIM card, then turn it on.
7. Go back to *#*#4636#*#* and check the preferred network, and now you can chage the network as what the f*ck you want, its your phone, dont let the issues brings you down fellas.
8. BOOM thats it.
---------- Post added at 04:39 PM ---------- Previous post was at 04:35 PM ----------
nepal1 said:
I have new hyperdrive rom while changing network mod WCDMA preferred to lte/gsm/wcdma..it goes back to again wcdma thats why have problems signal lossing n 4g lte
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
CAP HERE !
for those that can't change the preffered network type, please follow this simple stupid step, it works, you can thank me later.
1. Turn off your phone, then remove the SIM card
2. Remove and replace the battery to make sure that your device well rebooted.
3. Dont instert the SIM Card then turn on your device
4. Go to dial, *#*#4636#*#*
5. Go to device information and change the preferred network type, make sure it can be changed and not back to the old setting.
6. Turn off your device and insert the SIM card, then turn it on.
7. Go back to *#*#4636#*#* and check the preferred network, and now you can chage the network as what the f*ck you want, its your phone, dont let the issues brings you down fellas.
8. BOOM thats it.
^^ That didn't work for me.
I previously had an Axon 7 that got stolen. I ordered another one on Swappa and can't for the life of me get it to connect to LTE on AT&T in Southern California (Los Angeles area) when my first one had no issues at all. I wonder if the sim card they gave me isn't an LTE card. It's really frustrating.
Fikryaulia said:
CAP HERE !
for those that can't change the preffered network type, please follow this simple stupid step, it works, you can thank me later.
1. Turn off your phone, then remove the SIM card
2. Remove and replace the battery to make sure that your device well rebooted.
3. Dont instert the SIM Card then turn on your device
4. Go to dial, *#*#4636#*#*
5. Go to device information and change the preferred network type, make sure it can be changed and not back to the old setting.
6. Turn off your device and insert the SIM card, then turn it on.
7. Go back to *#*#4636#*#* and check the preferred network, and now you can chage the network as what the f*ck you want, its your phone, dont let the issues brings you down fellas.
8. BOOM thats it.
---------- Post added at 04:39 PM ---------- Previous post was at 04:35 PM ----------
Worked very nicely...thank you very much!!
CAP HERE !
for those that can't change the preffered network type, please follow this simple stupid step, it works, you can thank me later.
1. Turn off your phone, then remove the SIM card
2. Remove and replace the battery to make sure that your device well rebooted.
3. Dont instert the SIM Card then turn on your device
4. Go to dial, *#*#4636#*#*
5. Go to device information and change the preferred network type, make sure it can be changed and not back to the old setting.
6. Turn off your device and insert the SIM card, then turn it on.
7. Go back to *#*#4636#*#* and check the preferred network, and now you can chage the network as what the f*ck you want, its your phone, dont let the issues brings you down fellas.
8. BOOM thats it.
Click to expand...
Click to collapse
Worked like a charm. Thanks alot!!
Edit: Tested on Stock Oreo LG V 30
Theres an app called 4G Only Network Mode on the playstore that allows you to access more in depth settings of your device, then you can manually lock the phone into LTE mode or whatever mode you prefer.
https://play.google.com/store/apps/details?id=www.extremedroid.com.a4gltetoolkit&hl=en_CA
Hi,
1. I bought a Samsung s4 mini SGH-I257M, locked by Telus.
2. I tried install super root, but each time it tried to launch the application, a shield from up-left corner will block it to run.
3. I asked a mobile shop unlocked for me with Z3X, but the sim card cannot be registered (the sim card is not from Telus.) Every time when the phone try to register the sim card to network, there is a small shield icon will shows in the up-left corner and blocks it.
4 After two days, I went to the shop and got my phone back. I rooted my phone with Root Dashi, a chinese root software. It works! I inserted a Fido sim, the shield no longer there, but I still cannot register my phone to the network. Any idea?
Sorry for my English.
simickey said:
Hi,
1. I bought a Samsung s4 mini SGH-I257M, locked by Telus.
2. I tried install super root, but each time it tried to launch the application, a shield from up-left corner will block it to run.
3. I asked a mobile shop unlocked for me with Z3X, but the sim card cannot be registered (the sim card is not from Telus.) Every time when the phone try to register the sim card to network, there is a small shield icon will shows in the up-left corner and blocks it.
4 After two days, I went to the shop and got my phone back. I rooted my phone with Root Dashi, a chinese root software. It works! I inserted a Fido sim, the shield no longer there, but I still cannot register my phone to the network. Any idea?
Sorry for my English.
Click to expand...
Click to collapse
Rooting and carrier unlock are not the same thing. it sounds like you do not have an APN for Fido or slightly possible the shop was not successful, but if so the Fido SIM should prompt the phone to ask for an unlock code.
If so, there are tons of outfits that offer carrier/provider unlocking. You can Google the string "carrier unlock SGH-I257M". You will find How to videos on YouTube regarding unlocking as well.
But likely it is just a lack of an Fido APN not allowing it to register on the repeater. I looked for the APN BTW, No luck.
You might also do some XDA searches on Chinese online Rooting. The XDA Developer Arco68 has an excellent method that works very well on your phone if you should loose the root you have.
systwk said:
Rooting and carrier unlock are not the same thing. it sounds like you do not have an APN for Fido or slightly possible the shop was not successful, but if so the Fido SIM should prompt the phone to ask for an unlock code.
If so, there are tons of outfits that offer carrier/provider unlocking. You can Google the string "carrier unlock SGH-I257M". You will find How to videos on YouTube regarding unlocking as well.
But likely it is just a lack of an Fido APN not allowing it to register on the repeater. I looked for the APN BTW, No luck.
You might also do some XDA searches on Chinese online Rooting. The XDA Developer Arco68 has an excellent method that works very well on your phone if you should loose the root you have.
Click to expand...
Click to collapse
What do you mean "do some XDA search on Chinese online Rooting".
Should I ask Arco68 and see is there a i257m ROM for me?
When I power on my phone with Fido SIM card, it won't ask for unlock code any more. Where I can get the APN setting?
simickey said:
What do you mean "do some XDA search on Chinese online Rooting".
Should I ask Arco68 and see is there a i257m ROM for me?
When I power on my phone with Fido SIM card, it won't ask for unlock code any more. Where I can get the APN setting?
Click to expand...
Click to collapse
There are several threads on XDA about Chinese online rooting, it has been found that IMEI's, personal data and so forth have been transmitted to the host servers in the rooting process and links on XDA (wisely) have been banned until the matter has been fully researched. There is a good search function on these forums. You can find info.
Asking a developer for a specific ROM is bad form, just asking generaly in the Q&A section in will net what you are seeking. The Dev's are not paid, they donate serious work to the community as a whole, Read the forums for the i9195's, those are the ROMs available right now.
Read up on APN's, locate Fido users, call fido, do research. Anyway, hope some of that helps, it's about all I know about Fido. Learning with some effort is well worth the time spent. No one is born knowing this.
simickey said:
........................... Where I can get the APN setting?
Click to expand...
Click to collapse
APN Settings: From inside the Fido support website:
-------------------------->
Tap on Settings > Wireless & Networks > Mobile Networks > Access Point Names;
Once on the APN screen, press the Options button on the device;
Tap on New APN
Enter a name into the APN Name field. such as Fido APN
Please insert the following APN settings:
APN Settings:
APN: Fido-core-appl1.apn
If you have a LTE device, use the following setting: LTEMOBILE.APN
MMS (Picture & Video Messaging Settings):
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.11.13
MMS Port: 80
Leave the following fields blank: Proxy, Port, User Name, Password, Server
Press the options button on your device, tap on Save in order to save the APN settings.
Open the Internet browser icon on your device and start browsing. There are occasions where restarting your device is needed before it can browse. If you cannot connect to the Internet, restart the phone and try browsing the Internet again.
NOTE: The created APN will show up on the APNs screen. To activate the APN, tap on the radio button located in front of APN.
Hi Systwk,
Thank you! Actually I use Chatr, not Fido. Because I don't want damage my current SIM card (cut to micro), so I use FIDO sim card which is currently not in use to test my phone. I got my SIM adapter today. I cut my Chatr SIM card and tested with my phone. It says registered on network, but the notification on the main screen says ?Selected network(chatr) unavailable", and I cannot make any calls. When I choose "Select automatically", it will say "unable to connect, try later".
Do you have any idea?
BTW, I tried with APN FIDO, it's not work.
simickey said:
Hi,
1. I bought a Samsung s4 mini SGH-I257M, locked by Telus.
2. I tried install super root, but each time it tried to launch the application, a shield from up-left corner will block it to run.
3. I asked a mobile shop unlocked for me with Z3X, but the sim card cannot be registered (the sim card is not from Telus.) Every time when the phone try to register the sim card to network, there is a small shield icon will shows in the up-left corner and blocks it.
4 After two days, I went to the shop and got my phone back. I rooted my phone with Root Dashi, a chinese root software. It works! I inserted a Fido sim, the shield no longer there, but I still cannot register my phone to the network. Any idea?
Sorry for my English.
Click to expand...
Click to collapse
Shield Icon sounds like Knox to me. Please post screenshot. (Hold home + Power)
simickey said:
Hi Systwk,
Thank you! Actually I use Chatr, not Fido. Because I don't want damage my current SIM card (cut to micro), so I use FIDO sim card which is currently not in use to test my phone. I got my SIM adapter today. I cut my Chatr SIM card and tested with my phone. It says registered on network, but the notification on the main screen says ?Selected network(chatr) unavailable", and I cannot make any calls. When I choose "Select automatically", it will say "unable to connect, try later".
Do you have any idea?
BTW, I tried with APN FIDO, it's not work.
Click to expand...
Click to collapse
farewellartist's suggestion is a good one. It could help to see what is going on. That aside, you have to use an APN that matches the network you intend to use and the account has to be active. Also the network protocol set on auto shows it finds the Network, the Sim and phone can connect, but it also needs to know how to communicate with it to register on the system. That's possibly the issue.
You really may find some help calling your Providers tech support regarding connection. Yes, that about as fun as banging your toes with a hammer, but usually has better results. It may be as simple now as plunging in an Access Point Name, user name and password in the APN. (Some Pre-Pay acct's use user and Password) Good news is you DO have connectivity. It's now down to details.
Keep plugging along, you are making progress.
Here is the support link for their Pre-Pay. I'm in Florida so I'm clueless regards to who you are dealing with.
http://www.chatrwireless.com/web/content/support_landing
Hope that helps you some.
The picture shows below.
The shied is gone after I took back my phone from a mobile shop. I rooted my phone and deleted the knox.
simickey said:
The picture shows below.
The shied is gone after I took back my phone from a mobile shop. I rooted my phone and deleted the knox.
Click to expand...
Click to collapse
You are certainly not weak on signal. As long as you have the APN set at 'APN: chatrweb.apn' you should register.
Rare as it is, Bad SIMS happen. (Murphys Law). Just to rule out you can try the below and I Know the steps getting there are not needed, but it's for others in the future who may be newer at this:
To check connection at the base level try the following.
GoTo: Settings-Connections-Network connections-More networks-Wireless and networks-Mobile Networks-Network Mode, THEN start ticking the 4 setting starting with GSM only, and work upwards. It can't hurt.
Also when trying to connect with chatr, in the search for Network operators/Available Networks in mobile Networks, when it's done searching nets available, choose one chatr. not auto. If it finds two chatr towers try each.
I'm adding the chatr APN for anyone in the future as well. I assume you have the same but it's not in the screenshots.
You must be frustrated by now, hope someone else with experience on chatr can offer a fix. I assume you did get on either Telus or Bell so you know the thing connects, a replacement SIM is the last option I can think of.
Good Luck.............
Chatr APN
------
Name: Chatr
APN: chatrweb.apn
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mms.chatrwireless.com
MMS Proxy:205.151.11.11
MMS Port:8080
MMS Protocol: WAP 2.0
MCC:
MNC:
Authentication Type: PAP
APN Type: default, MMS, supl
APN protocol: IPv4
APN roaming Protocal: IPv4
APN enable/disable: APM enable
Bearer: Unspecified
Hi Systwk,
I did what you said, but my phone remain to same. It says unable to connect. Maybe flash the ROM is my last step?
simickey said:
Hi Systwk,
I did what you said, but my phone remain to same. It says unable to connect. Maybe flash the ROM is my last step?
Click to expand...
Click to collapse
If it were me I would not re-flash anything. The connection problem would not likely be from a carrier unlock. Also it is not likely it would be from rooting or installing the CWM boot loader.
You have a known system now, you know when it worked, and you know the few modifications you have done. Even if you have called Chatr tech support before, it might help to call again and tell them it will not log on to their system. DO NOT tell them you have rooted the phone, DO NOT tell them you installed a boot loader. If you do that, they will probably say that is the problem, END of support. Just say it was unlocked by a dealer and now takes their SIM but it won't work.
They should walk you through each step of the configuration, they want your money every month, you want their service. Good place to start. Give them your IMEI, make sure it's good and not 'blocked'. it's in the settings/about device/status or dial *#06#. I'm assuming you already have confirmed your phone is comparable with chatr, I think you mentioned it was from TELUS, but with BELL, ROGERS or whatever, unlocking does not guarantee the Modem is the same as the new network you are trying to use.. There are several other reasons, but SIM, IMEI and improper configuration are the most likely problems if compatible.
There is a chance it is something simple that has been missed. You have shown patience, that is a big plus with modding phones. Going step by step and being willing to start over is something many here have done, and many times. Small problems are sometime the easiest to miss. So Call Chatr tech support, if they have an outlet near you maybe you can get a replacement SIM from them, (I would check that first) as I mentioned before.
One other thing to try, see if you can get a new Pre-Pay/month to month SIM from TELUS or the original carrier the phone was branded for. It should work and if not, they know their configuration. I'm out of suggestions, hopefully someone from Canada can be of more help. Don't give up. There are always answers.
Thank you, Systwk
The SIM card works with my old phone, so probably is not the SIM card problem. I take out the SIM card from S4 mini and power on it, the signal still shows good. So, I think flash ROM is the most simple way for me. Anyway, I will can chatr on Monday.
Hi Systwk, I called Chatr just now. She said the APN setting is only for Internet and I need to go to a Chatr shop to check my phone and SIM card. I think I will go this weekend.
I think you bought the phone that has been report as stolen and has been blacklist so it is block on all network in Canada.
QCN FILE
If you are having a problem getting a signal on your I257M message me I will send you the qcn file for it so you can write it to phone via QPST.
Hi:laugh: Well I'm new to theses stuff so I will estate my problem and question:
I bought a unlocked (Verizon) HTC One, and I put my AT&T Sim Card --
The phone recognized the sim and its says 'at&t' and I input the at&t APNs(the 4g because thats its the plan i got)
but I can't call, sms or even going in to the internet its just says E(I think thats means Edge rigth?) and the phone doesn't do anything.
(I live in Puerto Rico)
I had tried in Global Mode and in GSM/UMTS mode.
I cant entered even setting that are suppose to pop when you dial *#*#4636#*#*
The phone is S-On.
What can I do to at least call/txt in the phone? Or what do you guys advise me?
GhostNinja said:
Hi:laugh: Well I'm new to theses stuff so I will estate my problem and question:
I bought a unlocked (Verizon) HTC One, and I put my AT&T Sim Card --
The phone recognized the sim and its says 'at&t' and I input the at&t APNs(the 4g because thats its the plan i got)
but I can't call, sms or even going in to the internet its just says E(I think thats means Edge rigth?) and the phone doesn't do anything.
(I live in Puerto Rico)
I had tried in Global Mode and in GSM/UMTS mode.
I cant entered even setting that are suppose to pop when you dial *#*#4636#*#*
The phone is S-On.
What can I do to at least call/txt in the phone? Or what do you guys advise me?
Click to expand...
Click to collapse
You should be able to text and call fine just no 4g.
Uhm..
Chilidog said:
You should be able to text and call fine just no 4g.
Click to expand...
Click to collapse
Uhm... I put the 2 AT&T APNs so far(3g and 4g) and neither of them let me txt or call.
I tried a dozen of time now; what do you think the problem is? Am I missig something here?
Update: I got it running, I put another apns that got the call/txt rthings working.
Anyways, mind to tell me why cant I get 4g?
GhostNinja said:
Uhm... I put the 2 AT&T APNs so far(3g and 4g) and neither of them let me txt or call.
I tried a dozen of time now; what do you think the problem is? Am I missig something here?
Update: I got it running, I put another apns that got the call/txt rthings working.
Anyways, mind to tell me why cant I get 4g?
Click to expand...
Click to collapse
Because the antennas built in the phone are different.
What about Metro PCS? How does it work there? Anbody can share some experience?
Thanks!
So...
Chilidog said:
Because the antennas built in the phone are different.
Click to expand...
Click to collapse
So what carrier (instead of Verizon) would do the work?
(by that I mean: the phone working with multimedia message, message, 4g, calls)?
In PR we got NET10, CLARO and some other, I just want the phone working with its pros :l
there's no way to patch the radio of the phone or something?
GhostNinja said:
So what carrier (instead of Verizon) would do the work?
(by that I mean: the phone working with multimedia message, message, 4g, calls)?
In PR we got NET10, CLARO and some other, I just want the phone working with its pros :l
there's no way to patch the radio of the phone or something?
Click to expand...
Click to collapse
dohcvtec said:
What about Metro PCS? How does it work there? Anbody can share some experience?
Thanks!
Click to expand...
Click to collapse
All I know is that everything will work except 4g.
Chilidog said:
All I know is that everything will work except 4g.
Click to expand...
Click to collapse
So it doesn't matter if you unlocked the phone or no, 4g won't work and that's it?
Thanks!
I have heard that the radios are there but have been disabled. I'm not sure how true that is, but knowing Verizon I wouldn't put it past them to do that so you can't use it 100% on their rivals. Kinda like how every other HTC One has the FM radio but ours is mysteriously broken... hmm...
Oh
Crawshayi said:
I have heard that the radios are there but have been disabled. I'm not sure how true that is, but knowing Verizon I wouldn't put it past them to do that so you can't use it 100% on their rivals. Kinda like how every other HTC One has the FM radio but ours is mysteriously broken... hmm...
Click to expand...
Click to collapse
Oh, even it's possible to enable those radios... right now any of the DEVs has been working on something like that?
GhostNinja said:
Hi:laugh: Well I'm new to theses stuff so I will estate my problem and question:
I bought a unlocked (Verizon) HTC One, and I put my AT&T Sim Card --
The phone recognized the sim and its says 'at&t' and I input the at&t APNs(the 4g because thats its the plan i got)
but I can't call, sms or even going in to the internet its just says E(I think thats means Edge rigth?) and the phone doesn't do anything.
(I live in Puerto Rico)
I had tried in Global Mode and in GSM/UMTS mode.
I cant entered even setting that are suppose to pop when you dial *#*#4636#*#*
The phone is S-On.
What can I do to at least call/txt in the phone? Or what do you guys advise me?
Click to expand...
Click to collapse
What settings did you use?
I have a verizon htc m8 sitting here I put my AT&T nano sim in today I got almost everything working EXCEPT sending pictures as attachments
I can browse the web, I can text, I can make calls, I just can not send a picture in txt messaging??
I did the following
settings
mobile data
cdma options or gsm/umts options
access point names
click the dots
then new apn
Added a new APN Deleted the verizon one..
my settings were from this page
http://apn-settings.com/us/att-apn-settings/
Name: ATT HSPA+
APN: phone
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms,hipri
APN Protocol: Leave it to the Default one
Bearer: leave it to the Default one
davew41 said:
What settings did you use?
I have a verizon htc m8 sitting here I put my AT&T nano sim....
Click to expand...
Click to collapse
You're in a forum devoted to the Verizon versions of the HTC One. So why post about your AT&T sim?
jpradley said:
You're in a forum devoted to the Verizon versions of the HTC One. So why post about your AT&T sim?
Click to expand...
Click to collapse
Because the phone is the Verizon version and is unlock that's why about the Att Sim problem.
But its seem that Its not the 'at; like they're saying is suppose to be a problem with the disable radios...
That's why asking is there's a way to enable those radios or something now
GhostNinja said:
Because the phone is the Verizon version and is unlock that's why about the Att Sim problem.
But its seem that Its not the 'at; like they're saying is suppose to be a problem with the disable radios...
That's why asking is there's a way to enable those radios or something now
Click to expand...
Click to collapse
I believe that any radios that do not function in the Verizon version of a phone (including frequency ranges for various cellular services as well as the FM Radio) were not disabled by any sort of software. Instead Verizon supplies phones with modified hardware: the circuitry and connections in the phone. No patch or App can change the hardware.
jpradley said:
I believe that any radios that do not function in the Verizon version of a phone (including frequency ranges for various cellular services as well as the FM Radio) were not disabled by any sort of software. Instead Verizon supplies phones with modified hardware: the circuitry and connections in the phone. No patch or App can change the hardware.
Click to expand...
Click to collapse
What about achieving S-Off and enabling the proper radios? I too have a Verizon HTC One with an AT&T SIM. Ive been doing a lot of research into it and found a couple suggesting that method would work. Thoughts?
Zachbnonymous said:
What about achieving S-Off and enabling the proper radios? I too have a Verizon HTC One with an AT&T SIM. Ive been doing a lot of research into it and found a couple suggesting that method would work. Thoughts?
Click to expand...
Click to collapse
I stand by what I said. A SIM doesn't change the hardware to which it is connected. But: is anyone preventing you from
continuing your research and trying whatever pleases you? I for one will be delighted to hear if and how you got FM to work on a Verizon HTC One.
So can someone please tell me if Verizon phones are supposed to have G connection only with Verizon sim card, how did my phone had G connection?!!?! Where I live and most of the places it says "E" but already I noticed on a couple of places that it says "G". What's the deal? Using MetroPCS!
p.s. Also contacted MetroPCS and they confirmed that I was using "G" connection...
I got this phone for my dad, as he had this old crappy phone for years and overpaid for his cell bill every month for minute plan lol i know.
So i got him this Galaxy s4-m919 model to find out that it was upgraded as part of a plan, then the person claimed it they lost it to sell it to another person, and ofc they wouldn't refund me.
So i took another path and came on here to get help, ofc it was a T-mobile phone, so I guess i'm blacklisted on t-mobile networks, but i flashed to 4.3 modem, did sim unlock, then flashed back to 4.2.2.
Put in my new Att sim card, and service has worked ever since, the lame part is now he wants to use MMS, and it keeps on failing to send/receive, when he recieve a mms from someone, it comes up as a huge ass url(you have to click it to see the picture in the browser or w.e, but never ever loads rofl, idk y.)
He doesn't use any apps, he just uses it for calling, internet at times, navigation, wants to use MMS, takes pictures/video, etc. But MMS doesn't work, I ever called the H2O to help me, and they said that i needed to change my "Message Center #" for it to work, seriously? My other phone has "+12063130004", and my dad's is "+13123149810", i think H2O rep wanted me to change it to the # my other phone has which is the first number i listed. Is this really the care? If so, how can I change it? =/
First thing to check, in my opinion, is to see if all the APN options are set correctly. Settings \ Mobile Network \ <more> APN Settings will usually get you there. The ATT APN settings can be found here but you may need to search around if H2O requires different ones. I'm on standard ATT and the settings at that link work for me, with my M919 phone.
Good luck!
Marc
Frankenscript said:
First thing to check, in my opinion, is to see if all the APN options are set correctly. Settings \ Mobile Network \ <more> APN Settings will usually get you there. The ATT APN settings can be found here but you may need to search around if H2O requires different ones. I'm on standard ATT and the settings at that link work for me, with my M919 phone.
Good luck!
Marc
Click to expand...
Click to collapse
Just tried ATT Phone APN settings, and my internet nor MMS work; yeah H2O has a bit different settings then att.
They're:
name: h2ointernet (doesn't do anything but eh)
APN: att.mvno
proxy: not set
port: not set
server: not set
MMSC: http://mmsc.cingurlar.com
Multimedia message proxy: 66.209.11.33
Multimedia message port: 80
MCC: 310
MNC: 410
Authentication type: not set
APN type: *
APN roaming protocol: IPv4
Turn APN on/off: on
Mobile virtual network operator type: none
I also saw somewhere that you can hook up your phone to the computer and change the Message Center # using Root Explorer(just re-read the post on xda about this and u have to have it rooted =/), then 'SilverEdit' to edit the xml to enter the message center number?( also heard it wasn't permanent either, if u turned it off, or battery died or w.e. it would revert to the previous #, not sure tho) Not sure what to do here. The internet works fine, but H2O rep says i need to change my Message center number to a different one for mms to work. Also tried changing default msging app to hangouts and sending a mms, and it came up with " mobile plan blocks MMS." I also put his sim card into my working phone, and ofc the message center # was the same when i switched it over to my phone and ofc it won't send, says "mms not supported by network, service response error"
Anyone?
Can anyone help me with "Message Center"? My MMS doesn't work, can't send or receive(when i receive an mms, it comes as a big ass url something like "viewmymessage.com/webgui/bla bla/ bla bla/ and so on/", can't open the link on the phone.
If you have AT&T service on a t-mobile phone it needs to be unlocked. He is using it to call people, so I guess it is. You should try flashing an AT&T modem.
Before that, try making your APN type: IPv4 or IPv6. And MM message proxy:0
I'l try that, just put in my H2O settings: APN type: IPv4 or IPv6. And MM message proxy:0; Can't try atm, as for some reason his data went down to 0, even tho he wasn't even using internet for anything on his phone...which was weird. The way I unlocked this phone was flashing the 4.2.2. modem, then went thru "service mode" and did step by step. If the Apn settings you gave, wouldn't work, would flashing the att modem 100% work(got link for the modem, cba to find it atm, last time if flashed it, i used odin)? I'm on 4.4.2 Android version, Baseband: m919uvufnb4.
Den Den said:
I'l try that, just put in my H2O settings: APN type: IPv4 or IPv6. And MM message proxy:0; Can't try atm, as for some reason his data went down to 0, even tho he wasn't even using internet for anything on his phone...which was weird. The way I unlocked this phone was flashing the 4.2.2. modem, then went thru "service mode" and did step by step. If the Apn settings you gave, wouldn't work, would flashing the att modem 100% work(got link for the modem, cba to find it atm, last time if flashed it, i used odin)? I'm on 4.4.2 Android version, Baseband: m919uvufnb4.
Click to expand...
Click to collapse
You're with AT&T on a Tmobile phone right? You should still need to have an AT&T modem. In the slot where it says "APN type", put it as IPv4 and the slot below "APN type", put it as IPv4, also. But non of that is worth trying if you are using AT&T service. You need AT&T modem and APN settings.
Edit: I was watching a movie and read you comment wrong lol. Yes you need to flash AT&T modem and APN
Kriptik210 said:
You're with AT&T on a Tmobile phone right? You should still need to have an AT&T modem. In the slot where it says "APN type", put it as IPv4 and the slot below "APN type", put it as IPv4, also. But non of that is worth trying if you are using AT&T service. You need AT&T modem and APN settings.
Edit: I was watching a movie and read you comment wrong lol. Yes you need to flash AT&T modem and APN
Click to expand...
Click to collapse
No problem, I was just wondering, is it safe to use other carriers modem onto T-mobiles phone, yet using At&ts modem(diff carrier), some people said it could screw up your IMEI or w.e rofl. I found the modems for i335 which is Att here: http://forum.xda-developers.com/showthread.php?t=2496517
Den Den said:
No problem, I was just wondering, is it safe to use other carriers modem onto T-mobiles phone, yet using At&ts modem(diff carrier), some people said it could screw up your IMEI or w.e rofl. I found the modems for i335 which is Att here: http://forum.xda-developers.com/showthread.php?t=2496517
Click to expand...
Click to collapse
I think you are safe.
Kriptik210 said:
I think you are safe.
Click to expand...
Click to collapse
Ahh okay, so I can just flash ATT NI1 KK modem(9/18/14) modem thru odin and i'm good? ;p
Off-topic, if you flash to att modem and you already unlocked your phone or w.e., nothing gets effected, once unlocked, stays unlocked eh?
Kriptik210 said:
You're with AT&T on a Tmobile phone right? You should still need to have an AT&T modem. In the slot where it says "APN type", put it as IPv4 and the slot below "APN type", put it as IPv4, also. But non of that is worth trying if you are using AT&T service. You need AT&T modem and APN settings.
Edit: I was watching a movie and read you comment wrong lol. Yes you need to flash AT&T modem and APN
Click to expand...
Click to collapse
Actually, be careful with this. The modem (which is two parts) has to be paired with the phone model. For example, an M919 can't use the modem from an I337. The Modem runs the radio hardware, which varies by phone. ATT & T-Mo variants have different antennae bands supported, so need somewhat different radios. I'm not sure if trying a different radio will brick anything, but numerous threads have said it doesn't work. The modem consists of the modem.bin (the "GSM Modem") which can be flashed at will, and the non-hlos.bin ("LTE Modem")which needs to be paired with the phone bootloader, or else chaos ensues.
You DO need the right APN settings. Unfortunately, I have no experience with the message center thing... can't help there.
Marc
Den Den said:
Ahh okay, so I can just flash ATT NI1 KK modem(9/18/14) modem thru odin and i'm good? ;p
Off-topic, if you flash to att modem and you already unlocked your phone or w.e., nothing gets effected, once unlocked, stays unlocked eh?
Click to expand...
Click to collapse
Your phone will still be unlocked regardless. Try to change the APN setting to AT&T first. Like Frankenscript said, both phones have different radios so changing the modem might not work.
Frankenscript said:
Actually, be careful with this. The modem (which is two parts) has to be paired with the phone model. For example, an M919 can't use the modem from an I337. The Modem runs the radio hardware, which varies by phone. ATT & T-Mo variants have different antennae bands supported, so need somewhat different radios. I'm not sure if trying a different radio will brick anything, but numerous threads have said it doesn't work. The modem consists of the modem.bin (the "GSM Modem") which can be flashed at will, and the non-hlos.bin ("LTE Modem")which needs to be paired with the phone bootloader, or else chaos ensues.
You DO need the right APN settings. Unfortunately, I have no experience with the message center thing... can't help there.
Marc
Click to expand...
Click to collapse
I seen people say it works and others say it didn't. Nothing about bricking the phone tho but I do understand what you are saying.
I tried ATT settings, didnt work. I put on H20 settings that were on the site, didn't work. Tried my bros H2O settings that he got from chat rep on their site, then 4G started working, but I keep getting "Mms failed, server error" or w.e. keeps failing, put the H2O internet settings(on), and mms settings. Not sure if his phone is missing something or because his phone is blocked on tmobile's networks, his using H2O meaning his on ATT's network.(i bought him a cheap 1$ mirco-sim, off ebay) Not sure if that plays any role, the calls are good, dats works now, etc, just mms wouldn't work. Suggestions? Some1 on H2Os rep side said it could be the "message center #", that's y it can't be sent or receive or w.e.(His is atts message center #, and its greyed out"
Anyone know how to fix mms problem?(cant receive or send atm, tried a lot of things). Mms keep failing, server error, not supported by network or w.e., lost on wut else to do.
Anyone?
Den Den said:
" then the person claimed it they lost it to sell it to another person,"
Click to expand...
Click to collapse
This is the root of your problem, buying stuff from other people, it's probably stolen.
Throw it away and go buy a new phone from Att and this issue will go away.
Somethings fishy here.
Pp.
PanchoPlanet said:
This is the root of your problem, buying stuff from other people, it's probably stolen.
Throw it away and go buy a new phone from Att and this issue will go away.
Somethings fishy here.
Pp.
Click to expand...
Click to collapse
Cell 4 sale store was selling it, not just a random person. I guess they probably either do it themselves ir buy it from ppl who do it.(upgrade their phone to gs4 or w.e. then claim it lost or stolen, thus keeping their old one and selling the new one) I think they probably flashed it to work for internation, but idk, might've been rooted before 4.4.2, since ota got installed, means root is gone. Anyway to fix the problem instead of just replying with a negative reply? I want to use the phone, calling etc works fine everywhere, 4g is a bit in some places, mms doesnt work at all, one rep at h2o said it might be cuz of message center number, he wanted me to change it to a diff one and see if it solves it or not, but my message center is greyed out.
Apparently there is something wrong with it, at least you should be able to get it replaced for one that works. It could be a build.prop issue. Just guessing.
Pp. Good luck.
Still looking for a solution, anything I could try, to fix Mms to work again?(cant send or receive as it says "server error", failed mms, etc)
So I jumped on the AT&T/DirecTV Unlimited data deal and ported my phone today. It all looked normal and I got the activation texts and such - it even populated the nxtgenphone APN info (though it was deselected and I had to select it). Anyway, I've had no data at all. As a test, I switched the APN to phone and data works, but the speeds appear to be much lower than what my wife's iPhone is seeing on the nxtgenphone APN. Anyone got any tips?
I'm running Viper 2.5, latest US unlocked firmware and US unlocked selected as carrier, and it works fine on AT&T other than this......only other thing I can mention is when I select preferred band or whatever it shows WCDMA/GSM and if I change it to WCDMA/GSM/LTE it reverts back for some reason. Any help much appreciated. I've called AT&T and they're like, uh, we don't sell the HTC 10 so can't really help you... grrrrrr.....
vettejock99 said:
So I jumped on the AT&T/DirecTV Unlimited data deal and ported my phone today. It all looked normal and I got the activation texts and such - it even populated the nxtgenphone APN info (though it was deselected and I had to select it). Anyway, I've had no data at all. As a test, I switched the APN to phone and data works, but the speeds appear to be much lower than what my wife's iPhone is seeing on the nxtgenphone APN. Anyone got any tips?
I'm running Viper 2.5, latest US unlocked firmware and US unlocked selected as carrier, and it works fine on AT&T other than this......only other thing I can mention is when I select preferred band or whatever it shows WCDMA/GSM and if I change it to WCDMA/GSM/LTE it reverts back for some reason. Any help much appreciated. I've called AT&T and they're like, uh, we don't sell the HTC 10 so can't really help you... grrrrrr.....
Click to expand...
Click to collapse
I'd suggest ruu to stock us unlocked rom and see if the issue persists.
Or, try clean flash of viper.
I have no issues using US unlocked on AT&T with both stock rom and ice.
Thanks for trying to help. I just finished trying stock RUU and same problem. I'm convinced, as I was before, that this is AT&T's issue. I've read numerous posts this afternoon that because the HTC 10 (and other phones) aren't in their "LTE approved" database, nxtgenphone APN won't work, or it will only give HSPA speeds. Seems like everyone who has resolved it, or didn't run into the issue at all had another AT&T LTE phone they could use for the IMEI on the account, or the rep entered the model as an iPhone or similar to make it work. Really, really frustrating, as they refuse to help me and I'm starting to think I should just terminate in the 14 day window and do T-mobile or Verizon.
I have at&t and everything worked out of the box, I've never been on stock rom, always on Viper I did the unlock and s-off without a sim and never had an issue or called at&t to activate the device I just transferred my sim from my note 4 to the HTC 10, no provisioning issues at all, VOLTE works, LTE is fine as well while on a phone call... No issues... If you need anything to compare let me know
Sent from my htc_pmewl using XDA Labs
jocarog said:
I have at&t and everything worked out of the box, I've never been on stock rom, always on Viper I did the unlock and s-off without a sim and never had an issue or called at&t to activate the device I just transferred my sim from my note 4 to the HTC 10, no provisioning issues at all, VOLTE works, LTE is fine as well while on a phone call... No issues... If you need anything to compare let me know
Sent from my htc_pmewl using XDA Labs
Click to expand...
Click to collapse
Thanks for replying. They did confirm it was a provisioning issue and they fixed it today. They had to do something different, as the default HTC 10 provisioning and IMEI check didn't fix it even when they tried it a second time, but they were able to adjust something and LTE definitely works now. VoLTE working here, too. Thanks!