Related
hi everyone. ok here's my problem, yesterday i installed acs ics 5.5 rom, then i nandroid restored the ei22 deodexed stock just to test the nandroid restore, just to see if it worked for me. i then again flashed back to the ics 5.5 rom, and this morning i nandroid back to ei22 again, because i wasn't happy of the non - 4g function.
anyways, later on today i decided to go into "my files" and delete 3 of the 4 nandroid backups that i had. because i believe the 3 that i deleted were bad. well after i did that, i started getting apps force closes, and now i can't open gtalk or my text message app.
if i do a factory reset, should that fix the problem? before i turn to odin and perform the whole process all over again?
NOTE - everytime i did the restores and flashes, i did do a pre-rom wipe with acs recovery.
androidmaster1 said:
hi everyone. ok here's my problem, yesterday i installed acs ics 5.5 rom, then i nandroid restored the ei22 deodexed stock just to test the nandroid restore, just to see if it worked for me. i then again flashed back to the ics 5.5 rom, and this morning i nandroid back to ei22 again, because i wasn't happy of the non - 4g function.
anyways, later on today i decided to go into "my files" and delete 3 of the 4 nandroid backups that i had. because i believe the 3 that i deleted were bad. well after i did that, i started getting apps force closes, and now i can't open gtalk or my text message app.
if i do a factory reset, should that fix the problem? before i turn to odin and perform the whole process all over again?
NOTE - everytime i did the restores and flashes, i did do a pre-rom wipe with acs recovery.
Click to expand...
Click to collapse
Someeone just posted a similiar issue they associated with the8ir sd card.
They said after nand bkp they had fc's and no apps on sd showed. Wiping cache and dalvik would be pre factory default wipe imho.
Sent from my SPH-D700 using XDA App
Yes, a Factory data reset will clear the FCs. But you will lose 3rd party apps and anything you have set up will have to be set up again. If you have a nandroid you can trust you can do an advanced restore data to get those things back.
Sent from my SPH-D700 using XDA App
so does that mean that i have to go into recovery and repartition the sd card?
update - heres what it says on bootup - UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable.
WHAT DOES THAT MEAN?
androidmaster1 said:
update - heres what it says on bootup - UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable.
WHAT DOES THAT MEAN?
Click to expand...
Click to collapse
No idea but sounds like you need to do a factory reste
sent from a phone using an app
Djinn23 said:
No idea but sounds like you need to do a factory reste
sent from a phone using an app
Click to expand...
Click to collapse
None of that will touch your sd card. And you don't need to. The errors are in phone memory.
kennyglass123 said:
None of that will touch your sd card. And you don't need to. The errors are in phone memory.
Click to expand...
Click to collapse
+1
sent from a phone using an app
ok, here is the update to what's happened. last night i odin back to ec05 and redid the process again for updating and rooting, and now everything works ok.
i don't know what happened, but it was so bad, that i couldn't even use my phones dialer to make a call. but the problem is fixed. THANKYOU EVERYONE, for your help, i really appreciate it.
androidmaster1 said:
ok, here is the update to what's happened. last night i odin back to ec05 and redid the process again for updating and rooting, and now everything works ok.
i don't know what happened, but it was so bad, that i couldn't even use my phones dialer to make a call. but the problem is fixed. THANKYOU EVERYONE, for your help, i really appreciate it.
Click to expand...
Click to collapse
Awesome good work. Just out of curriosity...did you try the reccomendations here? What were the results?
Glad u got it up and thanks for the update.
sent from a phone using an app
yes i did. i did a factory reset and wiped the cache partition and dalvik cache, and still nothing. somehow after i deleted the 3 nandroid backups, things got messed up. i kept getting errors of framework and gapps process issues. i don't know what could have caused it, but it wasn't pretty. at least i was able to get it fixed with odin.
question regarding this type of issue though, if i would have checked marked re-partion along with the reboot, what would happen? cuz i was really tempted to do so, but i didn't, given the fact that i didn't know exactly what would happen.
If you check repartition you need to include the PIT file which is the map of the partition for our phone. That will put your phones partition back to what it was when new.
ok, and where can i find the pit file? sorry again for the dumb question, but this is the part that is very new to me.
androidmaster1 said:
ok, and where can i find the pit file? sorry again for the dumb question, but this is the part that is very new to me.
Click to expand...
Click to collapse
No problem, we are here to help. The PIT file should be packaged with Odin so when you unpacked it into a directory it should be there. Victoryxxxxx.PIT
ohh yea, i have that file. so that's what that file is for. ever since i got odin and started using it, i've bee wondering what that file was for. ok, so, in what type of circumstances can i use that file? like what happened to my phone yesterday? or what?
just so i have an idea of when i should use it.
When in doubt you can always use the PIT and repartition. F.reset resets all the clocks in the phone so there is no need to fear if you accidentally leave that checked.
I'm having the same issues here. Once I flash a rom, after a week or two I get this FCs but I notice this usually happens when I swap batteries or restart my phone. Once I flash a new rom or same rom everything works just fine until I have to swap or restart my phone.
What's causing this? Mine friend epic is having the same issue and he is getting tired of the phone to the point of putting it for sale. Is there a way to fix this?
Sent from my SPH-D700 using XDA App
lepapirriky said:
I'm having the same issues here. Once I flash a rom, after a week or two I get this FCs but I notice this usually happens when I swap batteries or restart my phone. Once I flash a new rom or same rom everything works just fine until I have to swap or restart my phone.
What's causing this? Mine friend epic is having the same issue and he is getting tired of the phone to the point of putting it for sale. Is there a way to fix this?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
You are not shutting down correctly causing bad data writes to your phone. Turn power off, after the vibration make sure keyboard lights are off before you pull battery. Also make sure you have journaling enabled.
Sent from my SPH-D700 using XDA App
I have used marcusant and sleeper rom at the moment, and they usually shut downs completely with the screen, but yes I make sure the light on the kb are shut. I don't know much about journaling, I guess I have to read about it.
Sent from my SPH-D700 using XDA App
lepapirriky said:
I have used marcusant and sleeper rom at the moment, and they usually shut downs completely with the screen, but yes I make sure the light on the kb are shut. I don't know much about journaling, I guess I have to read about it.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Then it is strange that swapping batteries would cause any kind of data corruption. I believe those ROMs have journaling on by default. FCs are usually easy to fix. Most times it is a Google Services Framework error. This can be fixed using Titanium Backup and scrolling to Google Framework Services, select it and choose wipe data. Do that for any other app that FCs as well.
Sent from my SPH-D700 using XDA App
I just recently upgrade my rom into the beastmod 4.1 before that i was on beastmod 4.0 and faux kernel 0.006 and i didnt have any problems but this morning i just installed the beastmod 4.1 and now i cannot download my apps everytime i try to download an app it will say "swiftkey X keyboard could not be download due to ERROR 492." can someone please help
EffnNice said:
I just recently upgrade my rom into the beastmod 4.1 before that i was on beastmod 4.0 and faux kernel 0.006 and i didnt have any problems but this morning i just installed the beastmod 4.1 and now i cannot download my apps everytime i try to download an app it will say "swiftkey X keyboard could not be download due to ERROR 492." can someone please help
Click to expand...
Click to collapse
Look in this same forum for Market 3.4.4 and reinstall Market again. It is a broken issue caused by the new updated kernel on BM4.1.
EDIT: actually here you go and good luck
http://forum.xda-developers.com/showthread.php?t=1391559
i got a APK file how do i reinstall this? im very new to this stuff >_< got the phone a week
EffnNice said:
i got a APK file how do i reinstall this? im very new to this stuff >_< got the phone a week
Click to expand...
Click to collapse
Go to setting>applications and make sure that "unknown sources" is checked and go to development in the same page and see if USB debugging is checked as well. Then you are going to go to the "Files" in your applications list and look for your download folder where your APK file was downloaded to and click on it and follow the instructions and you should be good to go from there
omg im downloading my apps again ^_^ thank you so much!!!!!
when i download a new rom or update a new rom how do i keep my old widgets on my screen and apps? reinstalling the apps and adding widgets and customizing screen is so tiring T_T
EffnNice said:
omg im downloading my apps again ^_^ thank you so much!!!!!
when i download a new rom or update a new rom how do i keep my old widgets on my screen and apps? reinstalling the apps and adding widgets and customizing screen is so tiring T_T
Click to expand...
Click to collapse
Its a catch 22 since most times Market will re-up your apps but for Widgets you have to re-do again which YES its a pain lol
Also Titanium backup is a neat tool to backup your apps and remove ****e you don't need.
Glad to be of help and PM me anytime you have a question
Please delete
I think this young grasshoppa has found his answer and this thread needs no further action.
May you please delete?
Thanks in advance
solrac.dc said:
Look in this same forum for Market 3.4.4 and reinstall Market again. It is a broken issue caused by the new updated kernel on BM4.1.
EDIT: actually here you go and good luck
http://forum.xda-developers.com/showthread.php?t=1391559
Click to expand...
Click to collapse
I am getting the same error, still didn't fix it :-(
Matt -- HB Cali said:
I am getting the same error, still didn't fix it :-(
Click to expand...
Click to collapse
Try installing the red theme in the second post of BeastMOD that also worked for me in making market work or refer to the steps in the prior post with a reboot after
Matt -- HB Cali said:
I am getting the same error, still didn't fix it :-(
Click to expand...
Click to collapse
That link worked for me! Thanks!
I just flashed the senergy kernel .10 after i flashed the from and everything works fine
Sent from my GT-P1000 using XDA App
gatekpr said:
That link worked for me! Thanks!
Click to expand...
Click to collapse
Glad that it did and please hit the "thanks" button. Love to see my numbers go up (silly I know lol)
go into recovery mode and wipe cash and it will fix the problem
Another way is to log into your PC and log into the market and install an app or game from there. Worked for me.
Sent from my SGH-T989 using xda premium
schoi623 said:
go into recovery mode and wipe cash and it will fix the problem
Click to expand...
Click to collapse
I've wiped both the partition cache and dalvik cache, installed the 3.4.4 version of Market (above) and rebooted my phone.. Still getting 492 error..
I am having this same issue on my SGS2.
Running BeastMod 4.2 w/ Synergy Kernel
I have tried reflash of ROM, reflash of Kernel, install of Market 3.4.4, wipe cache, wipe dalvik cache, and fix permissions. None of these have worked.
These are some helpful steps I came across somewhere in the forums.
When I do this I have had no problems with the market.
Factory reset 3 times
Wipe cache 3 times
Wipe dalvik cache 3 times
Fix permissions 3 times
Wipe the battery stats 3 times
Reboot your phone
After the phone boots leave it without touching it for 10 minutes
492 error
Tried wiping dalvik cache, reloading Market 3.4.4, installing Red theme, and rebooting. Nothing works. Have the same problem with Paradox ROM. Cannot download or update anything from market. Finnally worked after booting into clockwork and wiping cache partition(not Dalvik cache).
Error (-101) ?????wtf is this?
has anyone got this error before? -101???
i flashed from jug 4.1 to dewizzed 2.0 and got it. then i flashed random roms and they all get it no matter the rom.
i even tried to re-flash kernels but no result
it even did it on a nandroid i flashed back to.... weird...
but i can select apps from the PC on the market site and it would download inot the phone...
someone help... my first really big problem in 3 months and i'm stuck...guess i was due for a speed bump
Mansquared said:
has anyone got this error before? -101???
i flashed from jug 4.1 to dewizzed 2.0 and got it. then i flashed random roms and they all get it no matter the rom.
i even tried to re-flash kernels but no result
it even did it on a nandroid i flashed back to.... weird...
but i can select apps from the PC on the market site and it would download inot the phone...
someone help... my first really big problem in 3 months and i'm stuck...guess i was due for a speed bump
Click to expand...
Click to collapse
May I suggest to ODIN to a stock rooted rom then choose a rom of choice and flash using CWM.
Sorry if it's a repost but I am trying to upgrade from T999UVLH3 to T999UVDLI3 but it fails as I have to go back to stock. What is the recommended way to downgrade to ICS from JB without wiping everything on my phone? or is there none? From what my search has resulted till now I will have to wipe everything, but i thought ill just confirm.
If i have to wipe everything then can i just use kies to do factory restore? I am using Mybackup to back everything up.
You really should be wiping everything every time you flash something.....
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
pradyots said:
Sorry if it's a repost but I am trying to upgrade from T999UVLH3 to T999UVDLI3 but it fails as I have to go back to stock. What is the recommended way to downgrade to ICS from JB without wiping everything on my phone? or is there none? From what my search has resulted till now I will have to wipe everything, but i thought ill just confirm.
If i have to wipe everything then can i just use kies to do factory restore? I am using Mybackup to back everything up.
Click to expand...
Click to collapse
You could try just wiping the system.
If it doesn't work, then you will need a complete wipe. Question - did you have any complete nandroid backups
gaww said:
You could try just wiping the system.
If it doesn't work, then you will need a complete wipe. Question - did you have any complete nandroid backups
Click to expand...
Click to collapse
I used Mybackup to do a back. Is it good enuf?
Also i just read that I can't do a factory reset. I will have to download the stock rom and ODIN flash it. I am currently downloading T999UVALH2_T999TMBALH2_TMB.zip. Is this a correct stock rom?
pradyots said:
I used Mybackup to do a back. Is it good enuf?
Also i just read that I can't do a factory reset. I will have to download the stock rom and ODIN flash it. I am currently downloadingT999UVALH2_T999TMBALH2_TMB.zip. Is this a correct stock rom?
Click to expand...
Click to collapse
Im having the same problem but Idk what flashing through odin means? I havnt flashed anything since Windows mobile except at the bar a few times when I was drunk lol. So my question is how do you I flash through odin.
pradyots said:
Sorry if it's a repost but I am trying to upgrade from T999UVLH3 to T999UVDLI3 but it fails as I have to go back to stock. What is the recommended way to downgrade to ICS from JB without wiping everything on my phone? or is there none? From what my search has resulted till now I will have to wipe everything, but i thought ill just confirm.
If i have to wipe everything then can i just use kies to do factory restore? I am using Mybackup to back everything up.
Click to expand...
Click to collapse
do a titanium back up?
racemepls said:
Im having the same problem but Idk what flashing through odin means? I havnt flashed anything since Windows mobile except at the bar a few times when I was drunk lol. So my question is how do you I flash through odin.
Click to expand...
Click to collapse
Don't want to sound rude in anyway but you really need to just put your phone down and do some reading. Or you are going to end up with a really exspensive paper weight. If you have not even heard of odin you should not be messing wihmth any modems or radios because the wrong modem will brick the **** out of that shiny new SIII. Like I said no disrespect and we were all new at this at one point. But just take some time and do some reading. Google can be your best friend and the more you learn the more you will end up getting out of your device
sent via galaxy s3 in boss mode @2.1ghz
Here is a link to a helpful post on downgrading: http://forum.xda-developers.com/showpost.php?p=30666949&postcount=135
Follow those steps and you should be good.
I flashed DLI3 right on top of LH3 using mobile Odin without wiping anything except Dalvik.
android.process.media started crashing after the reboot, but clearing cache and data for media storage took care of that.
carrrnuttt said:
I flashed DLI3 right on top of LH3 using mobile Odin without wiping anything except Dalvik.
android.process.media started crashing after the reboot, but clearing cache and data for media storage took care of that.
Click to expand...
Click to collapse
I did that too but when it was crashing this idea didnt occur to me. So i flashed stock on top of it. Now its stuck on "FIRMWARE UPGRADE ENCOUNTERED AN ISSUE", kinda bricked. What do i do?
Try to boot back into download mode and odin back to stock.
There really is a reason these updates have to be applied a certain way. Sorry you had to find out one of them. Shortcuts CAN brick your device!
11 Years Ago Today...
WE WILL NEVER FORGET!!!
GOD BLESS AMERICA!!!
carrrnuttt said:
I flashed DLI3 right on top of LH3 using mobile Odin without wiping anything except Dalvik.
android.process.media started crashing after the reboot, but clearing cache and data for media storage took care of that.
Click to expand...
Click to collapse
ok im at this stage now... and its crashing like crazy. How do i clear cache and stuff? is it in recovery mode?\
pradyots said:
ok im at this stage now... and its crashing like crazy. How do i clear cache and stuff? is it in recovery mode?\
Click to expand...
Click to collapse
Look for "Media Storage" in the Applications manager list within System Settings. It will be under the "ALL" tab. Force Stop it then clear data and cache. If that doesn't fix it, disable it completely. You can tell that everything's been fixed if you open your Play Store without triggering a crash. Once it's fixed, you'll need to re-enable media storage again, and reboot.
carrrnuttt said:
Look for "Media Storage" in the Applications manager list within System Settings. It will be under the "ALL" tab. Force Stop it then clear data and cache. If that doesn't fix it, disable it completely. You can tell that everything's been fixed if you open your Play Store without triggering a crash. Once it's fixed, you'll need to re-enable media storage again, and reboot.
Click to expand...
Click to collapse
Worked well but i can't root on JB now... Esignature verification failed when i try to install superuser.zip in recovery. Did u have this problem?
EDIT: Fixed it... all good. Thanks for ur help
Hi there!
I have had an s3 for a few days now and love it!.
Any TW rom and my camera works just fantastic.
Any cm10/aokp/miui/etc rom and I just cant use the camera no matter what app I use to try it, whether it be the built in app or camera360/etc.
Driving me nuts and would love someone to help me. Anyway research I have done hasnt told me what I'm doing wrong.
I wipe cache/dalvik/factory reset/system before each rom. I have tried different kernels but nothing has helped.
Any gurus out there have any ideas on what I can do to fix this?
Your install process would be and please link the files you are flashing... I'll try and help you. I've seen a few people mention this the past couple days.
The most recent I tried to flash was Illusion v1.1.18 - (d2tmo, d2att & d2vzw) - 1|18|13 from this thread:
http://forum.xda-developers.com/showthread.php?t=2037028
I downloaded Illusion-v1.1.18-d2tmo.zip and gapps-jb-20121212-signed.zip.
I went into recovery which is twrp and the most recent version. I installed it with the goo.im app.
When in recovery I did:
1) Factory Wipe
2) Wipe Cache
3) Wipe Dalvik
4) Wipe System
I would then click Install and select the rom file, and after it succesfully flashed I would then flash the gapps file. All were successful.
I would then reboot and the rom would boot up fine. I setup my google account and all that then for the heck of it I would reboot.
I then would try the camera app and it would complain that it couldnt connect to the camera basically. I went into the play store and tried a free version of camera 360, puddle camera, etc and all would not work.
I went back into recovery, wiped cache and dalvik again, hopped on one foot, faced east, and clicked my heels together. Upon reboot the camera does not work.
I have wiped all that and tried to install [Kernel][JB] Leankernel: Minimalistic Kernel for D2TMO/D2ATT (AOSP) v2.3 [1/17/13] which flashed fine. Upon reboot I could change voltages to undervolt, mess with governors but cameras still do not work.
I have a backup of two TW roms (one stock) and both of the those roms work beautifully with whatever camera I try, including the built in/stock camera.
I hoped I didn't leave out something. If there is something I missed than I'm an idiot because it seems like I am really missing something.
Thanks for your help.
I don't see any reason your steps lead to that, the exact steps I take every time to flash. I'm researching but in the mean time, go to app manager and wipe cache and data from gallery... Are you using the same Gapps over and over on each try? Might wanna try a different set.
mt3g said:
I don't see any reason your steps lead to that, the exact steps I take every time to flash. I'm researching but in the mean time, go to app manager and wipe cache and data from gallery.
Click to expand...
Click to collapse
I did that earlier with no luck.
I just force stopped on gallery, wiped cache/data, rebooted, and I tried the camera only to get the same message.
Thank you for that tip but I will continue my research also.
Just because I looked at about phone.
Model of phone is SGH-T999 (just in case someone thinks I'm in the wrong forum"
Baseband version is T999UVDLJA
Kernel is of course 3.0.59-leanKernel
AOKP Version is Illusion v1.1.18 d2tmo
Build number is aokp-d2tmo-userdebug 4.2.1 (I truncated the rest)
mt3g said:
Are you using the same Gapps over and over on each try? Might wanna try a different set.
Click to expand...
Click to collapse
I have downloaded this gapps twice for the last rom http://goo.im/devs/itsmikeramsay/gapps-jb-20121212-signed.zip.
For the miui rom there was a gapps that was specific to miui and had miui in the name. The miui rom's camera didnt work.
I'll look for a different gapps if that might be the problem but since I have tried a couple roms and a few different gapps I feel that might not be the issue.
I still will give it another try though. Just have to find another gapps to try.
try these just in case they're corrupted. http://d-h.st/dtk these are the ones I use
mt3g said:
try these just in case they're corrupted. http://d-h.st/dtk these are the ones I use
Click to expand...
Click to collapse
I redid the entire install process from scratch using that gapps and the camera is still not working.
Ugh. Thanks for the link.
WIll keep trying :/
run a log cat and post it. Other then that maybe bad firmware...
did you update your phone to stock JellyBean via Over the Air or Odin? it updates the partitions which could be the issue, mmayyybbeee???!?!? Shots in the dark right now, just trying to help as I've never seen this issue before solved.
mt3g said:
run a log cat and post it. Other then that maybe bad firmware...
did you update your phone to stock JellyBean via Over the Air or Odin? it updates the partitions which could be the issue, mmayyybbeee???!?!?
Click to expand...
Click to collapse
It had JB on it when I got it almost 2 days ago. I tried to do an OTA when I got it but it said I was up to date.
Let me do a restore to stock and see what version it is.
Edit: Restored stock. Says android version 4.1.1, Kernel 3.0.31-370274se.infra, Build number JR003L.T999UVDLJA
Was it already rooted?
Sent from my SGH-T999 using xda premium
mt3g said:
Was it already rooted?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
It was new, out of the box. I watched the guy unrap it. It is one of the newer grey metal color looking ones. It was not rooted. I did that. Should I do an Odin to bring the device back to complete stock and start from scratch?
Will take a while since I have no idea where to start with all that
Thats the best suggestion I have. Maybe someone else will step in with an idea.
Sent from my SGH-T999 using xda premium
mt3g said:
Thats the best suggestion I have. Maybe someone else will step in with an idea.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
You have been helpful. In a bit ill reflash a cm/aokp rom and logcat it.
This is happening a couple of threads above you haha http://forum.xda-developers.com/showthread.php?p=36899130
Sent from my SGH-T999 using xda premium
mt3g said:
This is happening a couple of threads above you haha http://forum.xda-developers.com/showthread.php?p=36899130
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Hey thanks again for your help. I ended up falling asleep but installed Wicked V6 (tw based rom) and liking it enough that I will wait on a aokp/cm10.x rom until I get up the motivation to try again.
I'm sure I'll get an itch for a different rom in about a week though
dccoh said:
Hey thanks again for your help. I ended up falling asleep but installed Wicked V6 (tw based rom) and liking it enough that I will wait on a aokp/cm10.x rom until I get up the motivation to try again.
I'm sure I'll get an itch for a different rom in about a week though
Click to expand...
Click to collapse
All good, just hope the thread I pointed to will work out once you do want to give it another go.
Sent from my SGH-T999 using xda premium
mt3g said:
All good, just hope the thread I pointed to will work out once you do want to give it another go.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I backed up Wicked and loaded up my original rom that I wanted to try.
The fix in the said thread fixed me right up, camera works fine.
All this trouble because of one 350ish kb file
Thanks for checking on my issue.
dccoh said:
I backed up Wicked and loaded up my original rom that I wanted to try.
The fix in the said thread fixed me right up, camera works fine.
All this trouble because of one 350ish kb file
Thanks for checking on my issue.
Click to expand...
Click to collapse
Most definitely sir. I don't understand why that file was getting screwed over. Glad it all got worked out for you.
Sent from my SGH-T999 using xda premium
Hey guys,
I recently moved to the gs3 and jelly bean so this may be a known solution but for the life of me I can't find it. I've tried liquid 2.1 and 2.2 both with multiple gapps and still have the problem on clean wipes. Phone itself is only a day old.
When I start my camera it lags for a minute showing no picture then crashes, saying gallery has stopped. The funny thing is it actually WORKED before I updated my google apps through play? Worked fine on original rom also. This is driving me nuts as it is literally my only problem and I need my camera, but love this rom.
Thanks!
EDIT: BTW. Gallery starts fine on its own and I've tried the camera32_patched_v2.zip fix I found on another site and no luck(just have two camera icons and both do same thing)
thegrog said:
Hey guys,
I recently moved to the gs3 and jelly bean so this may be a known solution but for the life of me I can't find it. I've tried liquid 2.1 and 2.2 both with multiple gapps and still have the problem on clean wipes. Phone itself is only a day old.
When I start my camera it lags for a minute showing no picture then crashes, saying gallery has stopped. The funny thing is it actually WORKED before I updated my google apps through play? Worked fine on original rom also. This is driving me nuts as it is literally my only problem and I need my camera, but love this rom.
Thanks!
EDIT: BTW. Gallery starts fine on its own and I've tried the camera32_patched_v2.zip fix I found on another site and no luck(just have two camera icons and both do same thing)
Click to expand...
Click to collapse
Clear data on the gallery app (settings/ manage applications, or something along those lines) go to all apps and find gallery, clear data on it and try to use the camera again..
SPRINT GS3 FAQ
flastnoles11 said:
Clear data on the gallery app (settings/ manage applications, or something along those lines) go to all apps and find gallery, clear data on it and try to use the camera again..
SPRINT GS3 FAQ
Click to expand...
Click to collapse
I've tried that. Still no luck.
thegrog said:
I've tried that. Still no luck.
Click to expand...
Click to collapse
Are you downloading your GAPPS from goo.im? If so, are they the 4.2.2 version?
Android Attack said:
Are you downloading your GAPPS from goo.im? If so, are they the 4.2.2 version?
Click to expand...
Click to collapse
Yes and yes. I've tried gapps-jb20121011 and 20130301, both on liquid 2.1 and 2.2. Clean wiped each time. Same thing with camera always. Grey screen when it starts and then shortly after opening it crashes with gallery error.
thegrog said:
Yes and yes. I've tried gapps-jb20121011 and 20130301, both on liquid 2.1 and 2.2. Clean wiped each time. Same thing with camera always. Grey screen when it starts and then shortly after opening it crashes with gallery error.
Click to expand...
Click to collapse
Did factory reset first from settings(not sure if you should do this from inside a rom but oh well) and then rebooted into recovery. Tried rewiping and reinstalling again... Cleared cache, divak. used liquid 2.2 and jb2012011 which goo.im says is correct, fixed permissions. Got constant com.google errors and couldn't run initial setup had to put 20130301 just to get to setup and have phone back running again. Camera still broke(this time I tried before any updates again and it didn't even work then). What am I doing wrong?
thegrog said:
Did factory reset first from settings(not sure if you should do this from inside a rom but oh well) and then rebooted into recovery. Tried rewiping and reinstalling again... Cleared cache, divak. used jb2012011 which goo.im says is correct, fixed permissions. Got constant com.google errors and couldn't run initial setup had to put 20130301 just to get to setup and have phone back running again. Camera still broke(this time I tried before any updates again and it didn't even work then). What am I doing wrong?
Click to expand...
Click to collapse
Not sure if this will help, but I suggest: Do factory reset from custom recovery, wipe cache and dalvik. Then, install the latest M Snapshot of CyanogenMod found here. Then flash the latest 4.2.2 GAPPS from here. Reboot into system, try out the camera and check if it works. If it works on CM, do factory reset, wipe cache and dalvik then install Liquid Smooth. Good luck!
Android Attack said:
Not sure if this will help, but I suggest: Do factory reset from custom recovery, wipe cache and dalvik. Then, install the latest M Snapshot of CyanogenMod found here. Then flash the latest 4.2.2 GAPPS from here. Reboot into system, try out the camera and check if it works. If it works on CM, do factory reset, wipe cache and dalvik then install Liquid Smooth. Good luck!
Click to expand...
Click to collapse
Update... I've been busy and have not had time to redo the phone again today, and I'm already 4 /0 folders deep(wtf 4.2?).
Here is the thing.. the camera started working out of the blue. I had the phone up for about 4-5 hours and randomly opened camera(which i keep doing) and it finally worked! I was able to take pics. Then my battery died... and now the camera is borked again after restarting. This is driving me insane. Any idea what is going on?
thegrog said:
Update... I've been busy and have not had time to redo the phone again today, and I'm already 4 /0 folders deep(wtf 4.2?).
Here is the thing.. the camera started working out of the blue. I had the phone up for about 4-5 hours and randomly opened camera(which i keep doing) and it finally worked! I was able to take pics. Then my battery died... and now the camera is borked again after restarting. This is driving me insane. Any idea what is going on?
Click to expand...
Click to collapse
Charged for a bit and was able to start camera on second try then it would not reopen no matter what I did. Restated a few times and everything. This is going to make me crazy lol.
thegrog said:
Update... I've been busy and have not had time to redo the phone again today, and I'm already 4 /0 folders deep(wtf 4.2?).
Here is the thing.. the camera started working out of the blue. I had the phone up for about 4-5 hours and randomly opened camera(which i keep doing) and it finally worked! I was able to take pics. Then my battery died... and now the camera is borked again after restarting. This is driving me insane. Any idea what is going on?
Click to expand...
Click to collapse
What I recommend doing is having phone charged to at least 70%, using Titanium Backup to restore your apps, and follow these instructions to the dot. This is what I did while using TWRP 2.5.
1) redownload LS v2.2 and gapps 20130301
2) backup all apps to TB
3) boot into TWRP
4) select 'Wipe' then 'Advanced Wipe'
5) wipe dalvik cache, system, data, cache
6) flash ROM then gapps
7) go back to 'Advanced Wipe' and wipe cache and dalvik cache again ONLY
8) reboot and run through setup wizard
9) immediately go into Play Store and cancel all installing apps.
10) install TB and restore user apps from there
11) reboot
now test out the camera
Sent from my SGH-T999 using xda premium
LuigiBull23 said:
What I recommend doing is having phone charged to at least 70%, using Titanium Backup to restore your apps, and follow these instructions to the dot. This is what I did while using TWRP 2.5.
1) redownload LS v2.2 and gapps 20130301
2) backup all apps to TB
3) boot into TWRP
4) select 'Wipe' then 'Advanced Wipe'
5) wipe dalvik cache, system, data, cache
6) flash ROM then gapps
7) go back to 'Advanced Wipe' and wipe cache and dalvik cache again ONLY
8) reboot and run through setup wizard
9) immediately go into Play Store and cancel all installing apps.
10) install TB and restore user apps from there
11) reboot
now test out the camera
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Did exactly that.. except installed newest cm10.1 M instead of liquid just to test. Same issue. Camera seems to work randomly but most of the time get the gallery has stopped error. Wtf?
thegrog said:
Did exactly that.. except installed newest cm10.1 M instead of liquid just to test. Same issue. Camera seems to work randomly but most of the time get the gallery has stopped error. Wtf?
Click to expand...
Click to collapse
Is there a zip for the old camera to add it back? I just need a working camera don't care which it is.
Have you tried this one? The gallery seems to work. Maybe it will for you too
http://forum.xda-developers.com/showthread.php?t=1966426
Sent from my Nexus 4 using xda premium
---------- Post added at 08:29 PM ---------- Previous post was at 08:19 PM ----------
You can also try the Note 2 repacked camera
http://db.tt/i2BOv4Ax
Sent from my Nexus 4 using xda premium
Does it give you an error, or just close out, FC, any thing? Sounds like an issue that may need some other type of edits. Oh and update your recovery, that's why you have multiple /0 folders....
mt3g said:
Does it give you an error, or just close out, FC, any thing? Sounds like an issue that may need some other type of edits. Oh and update your recovery, that's why you have multiple /0 folders....
Click to expand...
Click to collapse
It force closes with gallery has stopped error
look through this and try it out http://forum.xda-developers.com/showthread.php?t=2102981&highlight=camera+connect
LuigiBull23 said:
Have you tried this one? The gallery seems to work. Maybe it will for you too
http://forum.xda-developers.com/showthread.php?t=1966426
Sent from my Nexus 4 using xda premium
---------- Post added at 08:29 PM ---------- Previous post was at 08:19 PM ----------
You can also try the Note 2 repacked camera
http://db.tt/i2BOv4Ax
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Didn't work same issue
Tried some of the fixes from that thread too and nothing...
My question now is, I've seen someone saying turning on geotagging fixed the issue. I always turned it off when camera starts the first time, is there some way to turn it back on without redoing rom? Installing that other cam didn't even give me the option again and can't find it in settings.
Still can't get this camera working. Have not even been able to get it to work at all for 2 days now. Someone has to have an idea?
Solution - switch roms. You aren't stuck with roms. Try the aokp port. It's good. So is cm.
Sent from my SPH-L710 using xda app-developers app
WindroidApps said:
Solution - switch roms. You aren't stuck with roms. Try the aokp port. It's good. So is cm.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I HAVE switched to cm, I'm running it right now. Same exact issue. Works once in a blue moon but usually gallery has stopped and force close of camera. Worked on stock, this is a brand new replacement I got last week.