Related
I am running Genocide 0.3 with setCPU set to 1.2 Ghz and performance. I am getting scores lower than a 1.0 Ghz stock Epic with 2.2. I am getting 1113 and 2435 at 1.2 Ghz. That is definitely an improvement over stock EB13 where I was gettin 300-400 less on each. What could be slowing my Epic down?
Thanks.
kennyglass123 said:
I am running Genocide 0.3 with setCPU set to 1.2 Ghz and performance. I am getting scores lower than a 1.0 Ghz stock Epic with 2.2. I am getting 1113 and 2435 at 1.2 Ghz. That is definitely an improvement over stock EB13 where I was gettin 300-400 less on each. What could be slowing my Epic down?
Thanks.
Click to expand...
Click to collapse
Those scores aren't really all that bad. Not great, but not bad!
If it helps any (and might make you feel better ) run Smartbench again and note the scores of the next 2 or 3 phones below your score. Run Smartbench again and see what the scores are listed at for those same phones again and you will see that they have changed.
I'm sure that Smartbench is one of the best benchmark programs out because of they way it tests, but the "comparison" output it gives leaves a lot to be desired.
In any case, scores also vary based on what things are running in the background when the test is performed. (IE: As soon as the phone is booted up, immediately after killing apps/tasks, etc.)
Edit: The way a Rom is optmized has a lot to do with it as well. What Rom are you running with the Genocide kernel?
cjobanion said:
Those scores aren't really all that bad. Not great, but not bad!
If it helps any (and might make you feel better ) run Smartbench again and note the scores of the next 2 or 3 phones below your score. Run Smartbench again and see what the scores are listed at for those same phones again and you will see that they have changed.
I'm sure that Smartbench is one of the best benchmark programs out because of they way it tests, but the "comparison" output it gives leaves a lot to be desired.
In any case, scores also vary based on what things are running in the background when the test is performed. (IE: As soon as the phone is booted up, immediately after killing apps/tasks, etc.)
Edit: The way a Rom is optmized has a lot to do with it as well. What Rom are you running with the Genocide kernel?
Click to expand...
Click to collapse
Dameon's stock odexed eb13.
kennyglass123 said:
I am running Genocide 0.3 with setCPU set to 1.2 Ghz and performance. I am getting scores lower than a 1.0 Ghz stock Epic with 2.2. I am getting 1113 and 2435 at 1.2 Ghz. That is definitely an improvement over stock EB13 where I was gettin 300-400 less on each. What could be slowing my Epic down?
Thanks.
Click to expand...
Click to collapse
Ext4?
Sent from my SPH-D700 using XDA App
The answer to your speed desires is in my signature.
tpike said:
Ext4?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
No, stuck with RFS for now.
i use quadrant, its seems smartbench hates our phones..... i get crappy scores with smartbench, but with quadrant my phone roxxxxxxxx
k0nane said:
The answer to your speed desires is in my signature.
Click to expand...
Click to collapse
Hehe...you are tempting me. K0nane, answer my new question about flashing and I'm heading your way
Sent from my SPH-D700 using XDA App
kennyglass123 said:
No, stuck with RFS for now.
Click to expand...
Click to collapse
Ext 4 made a big difference for me. why not change?
Sent from my SPH-D700 using XDA App
kennyglass123 said:
I am running Genocide 0.3 with setCPU set to 1.2 Ghz and performance. I am getting scores lower than a 1.0 Ghz stock Epic with 2.2. I am getting 1113 and 2435 at 1.2 Ghz. That is definitely an improvement over stock EB13 where I was gettin 300-400 less on each. What could be slowing my Epic down?
Thanks.
Click to expand...
Click to collapse
1390, 2930 for me on trinity 0.4 oc 1.2ghz conservative.
Sent from my SPH-D700 using XDA App
tpike said:
Ext 4 made a big difference for me. why not change?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
It made a big difference on Smartbench? Want to switch but keep my stock apps and TouchWiz. I had some FCs last time I tried to just convert so want to make sure to pick a ROM with as little bugs as possible.
k0nane said:
The answer to your speed desires is in my signature.
Click to expand...
Click to collapse
+1 I almost went back to the evo before I tried this rom.
Sent from my SPH-D700 using Tapatalk
Well I jumped in to EXT 4 and Bonsai and bricked my phone, which only confirms my phone was flaky from the start. So I Odin'd the EB13 Deodexed with EXT4 and then Bonsai on top of that, restored with Titanium and VOILA, superfast! I finally beat the stock Epic and just about tie with that LG on top! Thank you all for the advice.
trying to run quadrant, phone hangs up on cpu step 10/12 every time. I know it's doing video decoding, but I feel like it shouldn't sit there for 5+ minutes...
running syndicate rom on eb13 ext4
Which SmartBench are you running? 2010 or 2011? If you're running 2011, the scores are going to be lower because he changed the baseline.
My scores on 1.2Ghz, Syndicate ROM are 949 and 2264 but significantly lower than the 2010 version which was (going from memory) around 1300 and 2900.
The way I use these benches are firstly against my own phone. The first numbers are my base and then I only compare against myself.
Secondly, you'll have to go to the website to filter the score results, but you'll compare your phone ONLY with those of the same phone.
Thirdly, once it's been established that all units are being run against the same tool, you can compare your marks against others.
Not saying my way's the only way of looking at things or that it's better; just that I do it this way.
How do you get kernal to overclock g2 to 1.9mhz
Sent from my T-Mobile G2 using XDA App
I thought at those it blows up!!!
Sent from my LG-P999 using XDA Premium App
You need flippys g2 fast kernel, http://forum.xda-developers.com/showthread.php?t=839687
Why do you want to OC to 1.9?
Sent from an ice cream sandwich
For me the 1.9 ghz kernel is a bit unstable for every day use . But oc at 1.5cm kernel works much better and 100% sable and battery friendly if you use profile in setcpu.
stian230 said:
For me the 1.9 ghz kernel is a bit unstable for every day use . But oc at 1.5cm kernel works much better and 100% sable and battery friendly if you use profile in setcpu.
Click to expand...
Click to collapse
Unfortunately, that varies by phone. Mine becomes unstable and 1.5GHZ
liltay53 said:
How do you get kernal to overclock g2 to 1.9mhz
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
I have to say. If you gotta ask dont do it! Make sure you setup good profiles for heat or you run a serious risk of frying your phone! Good luck some people got lucky and have no problems running 1.9. My phone has no problem with that speed until for some reason i have yet to discover somthing makes it heat up at random times. After that happened a few times i decided 1.5 is plenty.
Sent from my HTC Vision using XDA Premium App
I thinks it's underclocked @ 1.9Mhz
Root the phone
Install ROM Manager from the Android Market
In ROM Manager, flash Clockworkmod Recovery
Also in ROM Manager, backup ROM ("nandroid" backup)
Download the kernel and put it on the SD card.
Flash kernel from Recovery
Get SetCPU or CPU Tuner to set the CPU clock
As already mentioned, if you want to OC that high, SetCPU profiles with temp failsafes, etc. are a must. You might want to start with lower CPU clock speeds.
If you need more guides on how to get this done:
http://forum.xda-developers.com/showthread.php?t=916431
The Wiki guide is considered the safest way to root:
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
kernel manager has it.
Yeah, it does. Unfortunately for me, it's stable for less than five blazingly-fast minutes Guess I'll stay at 1.5!
I think for a phone that was clocked at 800, 1.9 is far too risky. I have no factual basis to say that, just seems like common sense.
Sent from my HTC Vision using XDA Premium App
^I agree^ That doesn't seem logical....
I can't see OC our phones to 1.9 being good on any level. Seems like were trying to push the hardware a bit too far.
Is that how people are able to get Quadrant scores in the 2000+? I can't seem to get that high at all. I have been using pershoot's kernel with CM7...but now on nightly #91- using stock kernel now. I have been cautious on trying out this one...
liltay53 said:
How do you get kernal to overclock g2 to 1.9mhz
Click to expand...
Click to collapse
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
dhkr234 said:
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
Click to expand...
Click to collapse
I really think they meant GHz...at least I hope so...
dhkr234 said:
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
Click to expand...
Click to collapse
Lol, i think he meant GHz, typo =P..
As for quadrant, my DZ easily hits an average of 2100+ when OCed to 1.3GHz using Virtuous G-Lite 1.0.2. I really don't trust those benchmarks though, as long as the battery lasts and the UI is smooth, I can't really complain.
Sent from my T-Mobile G2 using XDA App
Well...ok, I was just trying to make sure I wasn't missing a step. I am happy with my phone's performance, so I will not be concerned about that anymore.
Tommebaas said:
I thinks it's underclocked @ 1.9Mhz
Click to expand...
Click to collapse
Bravo! I can't believe nobody else caught that.
1.9Ghz will sometimes cause my phone to either overheat or crash. I have it set to 1.516Ghz on Pershoot's kernel.
Sent from a Western Union telegram.
How much can you overclock HTC Desire HD without damaging the hardware?
And how much do you have your Desire HD overclocked right now?
Sent from my mind.
I'm running the HTC Inspire, which is just the DHD +4g radio, keep that in mind though. It shouldn't affect CPU speeds, but who knows.
I've overclocked to 2.1ghz, but the most you'll ever need is 1.5. Past that you get stability issues and no speed increase, at all. It might even slow you down because of random glitches. Oh, and it gets really, really hot.
I usually stay around 1.2 ghz if I expect heavy usage (gaming, HD video), 700mhz for normal usage (web browsing, ebook reading, music)
I dunno about a safe zone, I've heard 1.5ghz and 1.6ghz, but nothing to back either up.
Thank you for your answer
And anyone else?
Sent from my mind.
Constantly on 1.25, I get glitches if I go higher, have to increase voltage in that case, works great for me this way though...
Depends on the rom. I'm using cm7.2 stable at 1.5 ghz and it's fast with no freezes or crashes
Sent from my laser emitting mammary glands.
It also depends on the hardware. Not all devices can OC to the same amount even if on the same set up
Sent from my Inspire 4G using Tapatalk 2
1.3 on interactive governor is my usual. Works flawlessly
As Zelendel points out there is no "safe" overclock, anything over 1ghz is outside the manufacturers stated performance and therefore at your own risk.
Yes I know there is a risk, but I know there is a point where the device starts to lag or glitch. Like more than 1.5 GHz
Sent from my Desire HD using xda premium
Muikkuman said:
Yes I know there is a risk, but I know there is a point where the device starts to lag or glitch. Like more than 1.5 GHz
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
You'd have to test your own hardware, I know of people who can run 2ghz all day and others who struggle with anything over 1.2ghz. Even if you'll run stable at xghz it doesn't guarantee that it's not over stressing your device.
Sent from my Desire HD using Tapatalk 2
ghostofcain said:
You'd have to test your own hardware, I know of people who can run 2ghz all day and others who struggle with anything over 1.2ghz. Even if you'll run stable at xghz it doesn't guarantee that it's not over stressing your device.
Sent from my Desire HD using Tapatalk 2
Click to expand...
Click to collapse
Is there anyway to see if your current overclock is stressing your device?
Sent from my Desire HD using xda premium
I can't imagine if you don't touch voltages and only overclock the CPU much can go wrong. In worst case scenario your phone will force reboot if it's OC'ed too high.
I been running my phone on +- 1.5GHz for months now and never had a problem (and definitely higher scores in benchmarks), higher seems useless because in benchmarks you see no more improval.
Anything til around 1.5/1.6GHz should be fine.
I'm currently on rcmixed rom as you can see in my signature, and I'm using daemon controller with andrev_oc using daemon controller standard voltages for overclocking.
what voltage do you use at 1.5 GHz?
Sent from my Desire HD using xda premium
Muikkuman said:
what voltage do you use at 1.5 GHz?
Click to expand...
Click to collapse
Sent from my Desire HD using xda premium
It really depends
Hi. It really depends how much your device can be overclocked without losing stability. But I don't think overclocking is really necessary on DHD. With the right ROM, it runs pretty smooth on 1 GHz.
I've installed ARHD 6.3.3. with a couple of its scripts, and it runs extremely smooth on my device and there is no lag whatsoever.
Overclocking really can lower the life of your device.
blinkash said:
Hi. It really depends how much your device can be overclocked without losing stability. But I don't think overclocking is really necessary on DHD. With the right ROM, it runs pretty smooth on 1 GHz.
I've installed ARHD 6.3.3. with a couple of its scripts, and it runs extremely smooth on my device and there is no lag whatsoever.
Overclocking really can lower the life of your device.
Click to expand...
Click to collapse
Yeah that's true =\
Sent from my Desire HD using xda premium
setcpu
can you uninstall setcpu after your dont over clocking?
I can go up to 1.3Ghz, anything higher just freezes the device after some time and I have to pull battery out.
Muikkuman said:
How much can you overclock HTC Desire HD without damaging the hardware?
And how much do you have your Desire HD overclocked right now?
Sent from my mind.
Click to expand...
Click to collapse
Don't try to Overclock more then 1.5Ghz.
Hehe I did overclock to 1.8 GHz once and my mobile froze. But I pulled the battery and now I'm running stock speed.
Sent from my HTC Desire HD using xda premium
The one v has a 1 ghz single core processor so my question is is it possible that the processor from our one V behave like a dual core processor ? Ist it possible
Sry for my bad english xd
Sent from my HTC One V using xda premium
I'll assume when you mean behave like a dual core you mean the processing power of a dual core.
Most likely not however users are reporting (assuming you flashed a kernel that allows overclocking) that you can do 1.5Ghz stable (which I am currently doing), however Titanium allows up to 2.0Ghz.
Not dual core, but it's as good as can be.
I have the kiss kernel up to 1,5 ghz on 2ghz my phone frezzes how can this be fixed?
Sent from my HTC One V using xda premium
dontbelive said:
I have the kiss kernel up to 1,5 ghz on 2ghz my phone frezzes how can this be fixed?
Sent from my HTC One V using xda premium
Click to expand...
Click to collapse
Then just try higher frequency above 1.5 and below 2.0
So you can find your best frequency clock..:good:
Because it's depends on what kind of activities that peoples doing in their phone.
I'm running at 1.7ghz on my primoc with no issues so far
Sent from my One V using xda app-developers app
My phone withstands the 2ghz constantly, but I don't think it's necessary. Every phone has different CPU, and so withstands different freq.
Sent from my ONE V with CM10
My phone runs fine till 1.7 ghz.
It depends from phone to phone. However even after overclock you will not find a lot of difference in performance.
I've tried it but it frezzes only up to 1,5 ghz is able to work for my phone
Sent from my HTC One V using xda premium
Then use 1.5 ghz.
imo anything above 806 mhz feels the same if not playing games. When you play games then 1.4ghz is good enough.
Lil bit an off topic question here. What is the best governor for playing games. I'm currently OC'd at 1.2GHz?
JalmiNyondong1933 said:
Lil bit an off topic question here. What is the best governor for playing games. I'm currently OC'd at 1.2GHz?
Click to expand...
Click to collapse
many people will suggest smartass v2 or ondemand...
you can read the details, here :good:
A few questions about overclocking
First, is this even working? I'm using the latest PA ROM.
What are the best possible settings that don't damage the phone?
Sent from my One V using xda premium
Yes overclocking is definitely working. U can notice a sharp difference between lower and higher values...don't overclock above 1.7 GHz it may damage ur phone...
Sent from my One V using xda app-developers app
matjazfinzgar said:
A few questions about overclocking
First, is this even working? I'm using the latest PA ROM.
What are the best possible settings that don't damage the phone?
Sent from my One V using xda premium
Click to expand...
Click to collapse
Woha dude don't even think about going above 1.5.....and I am using 1.2 it's super stable right now...once again if u go.above 1.5 u may damage ur phone
Sent from my One V using xda premium
what kind of kernel do you need to overclock? are most custom roms ready for it already?
tellabee said:
what kind of kernel do you need to overclock? are most custom roms ready for it already?
Click to expand...
Click to collapse
All roms can be over clocked...it depends on the kernel
Sent from my One V using xda premium
ohhh i see. so are all kernels that are compatible with the phone compatible with all roms?
cybervibin said:
Woha dude don't even think about going above 1.5.....and I am using 1.2 it's super stable right now...once again if u go.above 1.5 u may damage ur phone
Sent from my One V using xda premium
Click to expand...
Click to collapse
mihirengg19 said:
Yes overclocking is definitely working. U can notice a sharp difference between stock and overclocked kernels...don't overclock above 1.7 GHz it may damage ur phone...
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
You guys.... stop scarying the people already. Overclocking your device will not break it in any case, most likely will shorten YOUR BATTERY LIFE! But that's it! You will not fry your phone, motherboard, display or whatever. I can ramp my phone upto 2ghz and it has nothing... But 1024 mhz or 1200 is enough!
I had OCed hellboy to 2 GHz...it felt stable but the phone crashed every time i opened an app...anyways 1.2 is best works so smoothly...best for everyday use...
Sent from my One V using xda app-developers app
When I overclock to 1.5ghz I don't notice any difference at all ...why ?also if I sometimes try 2.0ghz the phone becomes laggy like hell
donhashem.dh said:
When I overclock to 1.5ghz I don't notice any difference at all ...why ?also if I sometimes try 2.0ghz the phone becomes laggy like hell
Click to expand...
Click to collapse
Difference is there. Just to be sure that your phone works at that range (and its not a rom/kernel problem) - install Perfmon from the market and open the CPU section - It will then show you in real time at what range your CPU works. And if 2.0 gh becomes laggy it is because your cpu can go that high. Some cpu's can and others can't. That's just how they work. My old HTC Hero could go upto 691 from 526 default but other HTC Heroes could go upto 740....
Yo Son, Just OC'ed my V to 1.8GHz, it flys. Kill those animation.
When I oc'ed to 2.0GHz stability test Crashed dawg. Stability test it son!
BTW: When I drop to 1.9Ghz throttling issues Nig. So bench your one V too.
now I'm at 1.8GHz it's stable and no heat issues at all.
soulz said:
Yo Son, Just OC'ed my V to 1.8GHz, it flys. Kill those animation.
When I oc'ed to 2.0GHz stability test Crashed dawg. Stability test it son!
BTW: When I drop to 1.9Ghz throttling issues Nig. So bench your one V too.
now I'm at 1.8GHz it's stable and no heat issues at all.
Click to expand...
Click to collapse
Throttle 1.9ghz vs no throttle 1.8GHz
Sent from my HTC One V using xda app-developers app
Benchmarks are useless..
Why?
1ceb0x said:
Benchmarks are useless..
Click to expand...
Click to collapse
May I ask why? Not about AnTuTu.. but Quadrant Standard is great!! Even helps in choosing a better ROM.. a little..:cyclops:
The only use I have for benchmarking apps is to compare changes in roms and kernels on your own phone. If you use the same app to benchmark, you can see the different performance gains and losses in various rom and kernel combinations. i really don't think they do any good comparing performance between different phones, but for checking on your own mods they do come in handy.
riggerman0421 said:
The only use I have for benchmarking apps is to compare changes in roms and kernels on your own phone. If you use the same app to benchmark, you can see the different performance gains and losses in various rom and kernel combinations. i really don't think they do any good comparing performance between different phones, but for checking on your own mods they do come in handy.
Click to expand...
Click to collapse
Use benchmark to determine throttling
Here are some tips I know which increases the benchmark rating..
Use PERFORMANCE as the Governer after overclocking.. And disable 'Force use of GPU for 2D Drawing' in developer options.
Sent from my One V using xda app-developers app
Paresh Kalinani said:
Here are some tips I know which increases the benchmark rating..
Use PERFORMANCE as the Governer after overclocking.. And disable 'Force use of GPU for 2D Drawing' in developer options.
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
dont diable them, ur games will lag like ****, paresh dont give wong instructions. if u cant give proper instructions,please dont!
if u diable that, only the taransition animations willl be smoother along with some others, if u dont play games go ahead
cybervibin said:
dont diable them, ur games will lag like ****, paresh dont give wong instructions. if u cant give proper instructions,please dont!
if u diable that, only the taransition animations willl be smoother along with some others, if u dont play games go ahead
Click to expand...
Click to collapse
Ya I know that games lag. I just told for the 'Benchmark'.. 'cause I've always noticed my benchmark increasing when I disable it..
Of course I enable after the bemchmark! Wonder why does the benchmark increase...
Sent from my One V using xda app-developers app
dear ,
i am on mysence-v liteRC2.0 rom with helboy kernal , i wanted to increase my phones performance and now i am on 1.2ghrts so please let me know whats the maxmimum and min freequesnce i should set to get good preformance like if i keep max to 1200 and min ?? please i am new to this