Hy guys
I have a HTC P3350 and after sw installation it display the HTC splash screen only
I have tried to reboot, soft and hw reset but the PDA receive mtty commands only.
I have tried to install the P3300 original ROM but the systems don't accept it ......
I'm thinking to install the P3350 original ROM but don't find it .... in the CD is not present and in the HTC support site too.
How could I solve my problem? .... is it possibile to have the P3350 original ROM?
Help me and thank's a lot
Fede71
Yesterday I started to get problems with my HTC Touch Diamond. I flashed my device with udK Syrius HD R0 (BETA 5) and everything was going smooth, restored my contacts, my messages and tweaked WM6 a bit.
But after a soft reset to apply all changes the device welcomed me with the ordinary "You're using your device for the first time" message and I had to setup my device again. After another soft reset my device hung at the boot screen with ROM information and the "Touch Diamond" text.
All I could do now was a hard reset. But the problem didn't go away... the device kept freezing and resetting, and I had to do 2 or 3 more hard resets before I decided (actually I already had, but had to wait for the download to finish ) to flash to another ROM.
So I downloaded Vic Hybrid 2 Diamond ROM UC. Flashed and everything seem to went fine. But just as before, after a soft reset the device hung. Hard reset...
Why's this!? Is my HTC Touch Diamond broken or is there anything I'm missing? Perhaps this occur because of the ROM's is based on the firmware 1.97??
EDIT #1: sorry, wasn't meant to create this topic under "ROM Development"... Any mod, feel free to move it.
EDIT #2: Seems one more guy had this a relating problem after ROM flash (udK's ROM for that matter too): http://forum.xda-developers.com/showthread.php?t=455335
EDIT #3: "The device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source. Press SEND to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings."... didn't have time to press any "SEND" button either... it continued to... guess? The setup! Entering date + time + calibrating the stylus...
*sigh*... not it happend again. Just restored all my SMS and tried to thread them again (screw that either way!), soft resetted my device... and the damn WM6 setup guide for clock, calibration showed up, and now "Installing..."
*sigh - again*
hi dude i had the same problem
i have a DIAM300 and had the olinex 1.40 hard spl with mossis rom 2.5 (ger)
i flashed mossis 2.6 which is based on 1.97 and i had those problems too, after a few softresets it makes a hardreset...then i tried olinex 1.93 thought it could be the bootloader but the problems were still there...
i tried some other roms, udk Syrius too which is fast as hell, but unfortunately the same problem here and sometimes it even didn't boot...
i made about 50 softresets, 20 hardresets, flashed bout 10 times....then i had enough, flashed the original O2 rom, flashed the original bootloader, flashed the original rom again, and now everything is allright, it's runnin, no hardresets, i tried about 20 softresets, installed software blabla....
but now i'm wondering if the problem will be there again when i start to flash
and its really annoying when u flash a rom, customize everything, everyting seems to be allright and then it makes a hardreset instead of a softreset....
gizz68erz said:
then i had enough, flashed the original O2 rom, flashed the original bootloader, flashed the original rom again, and now everything is allright, it's runnin, no hardresets, i tried about 20 softresets, installed software blabla....
Click to expand...
Click to collapse
Damn, I don't want to flash to the orginal ROM! Just flashed to a ROM I've tried earlier, based on 1.93, Panosha ShineOn, so let's see if there's any more trouble...
gizz68erz said:
but now i'm wondering if the problem will be there again when i start to flash
and its really annoying when u flash a rom, customize everything, everyting seems to be allright and then it makes a hardreset instead of a softreset....
Click to expand...
Click to collapse
Yeah, I feel the pain. Getting sickin' tired of this **** now!!!
Try this one
Hi
Whenever i have this kind of bizar issues [ also with previous devices i had before my Diamond] i did the following:
1. Flash back to original official ROM including Radio [ no need to compelrte the initial setup , just flash and go back to bootloader screen right after]
2. Flash again to the targeted cooked ROM
3. Probelm disapeared
My assumption is that for some cooked ROMs the coverage of files been flashed and replaced is not 100% and therefor we face inconsistancy issues.
Try it
my view of this
my view of this:
new roms have other architecture such as new manila new drivers etc etc (1.97)
when you "tweak" them such as manila mods wich are made for older versions this kind of problems can happen. the problem is we have to many modded roms right now. we have 1.37 roms 1.93 roms 1.94 roms (ported from raphael) 1.97 roms and so on. all of this roms you cant compare with each other.
a example: HTC Diamond Manila has no LANDSCAPE files. every rom wich has landscape support had included RAPHAEL Manila parts. no one can deny this. cause its the only device right now that offered the landscape support on manila. but looking to diamond application and software section here and the date this files were made are back in the past. this is just a example where this problem result of.
just my 2 cent
alphazero said:
my view of this:
new roms have other architecture such as new manila new drivers etc etc (1.97)
when you "tweak" them such as manila mods wich are made for older versions this kind of problems can happen. the problem is we have to many modded roms right now. we have 1.37 roms 1.93 roms 1.94 roms (ported from raphael) 1.97 roms and so on. all of this roms you cant compare with each other.
a example: HTC Diamond Manila has no LANDSCAPE files. every rom wich has landscape support had included RAPHAEL Manila parts. no one can deny this. cause its the only device right now that offered the landscape support on manila. but looking to diamond application and software section here and the date this files were made are back in the past. this is just a example where this problem result of.
just my 2 cent
Click to expand...
Click to collapse
Yeah, I bet there's some issues with the new 1.97 and all the new drivers. The chefs need to get stuff straight before I'm trying any new 1.97 based ROM out again.
My issue seem to have been fixed after flashing to Shine On 2.4 Full (1.93 based!). My device now soft resets OK, and I keep all settings... well, atleast for the moment. I'll continue to soft reset every now and then to see if the problem comes back to me.
Yeah, got EXACTLY the same problem with ROMs based on Touch HD or Quartz OS built Hard SPL 1.93 And I don't use any manilla mods, prefer its original view with original tabs. All I have is some portion of software to install:
- Inesoft Cash org;
- Inesoft Address book;
- Agenda Fusion 8;
- Alreader;
- Auto keeper;
- HiCalc;
- Navitel Navigation system.
and the only "tweak-like" soft I use is Answerkeysdisabler. But having serious intentions to reach the truth I didn't install it.
When I've tried to flash syrius beta 02 AND beta 05) I got a STABLE hard reset after 3-5 reeboots. And it doesn't correspond with the quantity of soft installed, it's just resets and thats all.
When using Aztor v7 i had 99% hangup when installing my software just after HR, and it always hangs on different program installation, then, after reeboot manilla cannot start.
These are very interesting ROMs, especially I like AZTOR's pholosofy, but... couldn't manage to give it a try
Tried SwiftBL's, Dutty's, Bepe's ROMS - all smooth and fine. And the STABLEST FOR ME was the old bElite 0,99d. NO issues at all! Now i'm usind Dutty's 3,4 in general it's stable and ok, but with some minor issues. Would be really nice to have issue-free ROM based on new versions of software.
I see in many roms threads the number of the update and the date, but i would know if an update, let me write an exemple ...
------------------------------
Htc diamond -> htc camera 1.0
Htc Raphael -> htc camera 1.2
-new rom for diamond
htc camera 1.2 from raphael
------------------------------
Do you realy think it's a really update, cause it's not the same hardware, raphael have a flash and not the diamond !
Updating i'm ok but i dont think updating with the last number is a good choice ! For exemple the "ati drivers", if the diamond has been selling with the driver "A" it's not for use it with the driver "B", i'm i in the error ?
Is there a follow near the manufacturer ( an idea ... htc ... to know what is compatible and what is not compatible ?
I know upgrading is as our own risk, are theyre really usefull ?
May be just a registry editing can be fast than a new rom, the black thing is the memory ... On a manufactured phone we have less than what we need for live ( it's an image ) with a cook too many memory !!!
Ok i guys,
I currently build a rom (French WM6.1 for the HTC Vogue). evrything i do so far is ok and i flash my phone with. when it start i know windows start cause the HTC animation appear and when i force close my phone, i hear the sound of the warning message, but the windows screen dont appear and my phone get stuck on the end of the HTC animation so my problem is that i want to know where i got something wrong in my custom rom
So what i do is that i take a rom from HTC Touch that was in french and i take the official bell mobility rom and i switch the language files. i custumixe my boot.rgu so it start in french (040C) and il modify my .hv file (In metadata)
So i upload the rom so if you guys can help me out
daXan
There's the link of my NBH rom (DO NOT FLASH!!!!!!)
http://www.megaupload.com/fr/?d=I34W3GB3
i try to install android from this ROM (dnbtommy_s1.RLS)
the set up can not finish successful in the end
whn i rest my device there is no wm rom , no boot screen
just load linux... i dnt know how to handle it....
i try to install Wm Rom bak on kaiser but there is no atcive sync connetion or nthing else
what gona i do...
plz help me
Hurry...... :'(
You used right procedure for installing Android?!
...use another build...i'm not sure how good dnbtommy works...
[going back to WinMO]
if you started procedure of installing Android (flashin kernel, build etc.) you will not be able to connect device over activesync. Get WinMO .NBH file ~60MB+ put on SDCard and flash it like you are flashing kernel for Android [Camera + Power button]...after that everything will work normal...
thnks Budyy i need some important information
buddy i need some important information about my kaiser
my kaiser is working fine but suddenly its gona turn off... whn i opend camera and make a video my kaiser .. and second thing batry drains so much fast....
and can u tell me the best wm6.5 rom for kaiser
plz post the link if u know abut the best rom
i install Rom
rom version is kaiser touch wwe
radio version is 1.70.18.02
no doubt room is gud but it has many bugs... like some time key pressing not responding like etc...