Related
I got a jasjar and from past 2 weeks its acting wired by getting hanged every now and then.. I have no idea on whats goin wrong in that! Im think to update it to wm6.
If anyone can help me on how to stop this piece of brick on getting hanged every now and then it would be a great favour for me. I would also like to know how can i get the update to wm6 for jasjar. Im using the lastest ROM from club imate which is
For the Arabic Build: NEW
Rom version 1.30.82
Radio version 1.09.00
ExtROM version 1.30.171
hello
I have trid all radios, all wm6 roms and all wm6 versions....all , and more than one time...i faced such hanging and crashs , battery drains...etc
but lastly i found the best rom...
the best combination you must use is pdaviet 2.10.06 and radio 1.17 ( this radio version you can get it from tmobile last update)
do this combination and you will see brilliant jasjar....and i'm ready to help you
and or arabic....you can use imaginet 343 , and after that i can give you 3 files to put in windows folder of your jasjar, then your keyboard will write in arabic and english......
Nedal
Thx Bro, Cud u send me the files n the way of doin it.. Im really havin tough time coz i have to rest the device for more than 50 times a day.
Will i be able to get messages in arabic n reply them back?
download the following file http://www.t-mobile.hr/firmware/UNI_TMO_TMO_HR_20041_200147_11700_WWE_Ship.exe
extract it and from output folder take radio_.nbf
then download 2.10.06 rom from here http://rapidshare.com/files/28336384/ROM_v2.10.06_PDAVIET_UNI.rar
add the radio_.nbf to the rom update folder, then flash it....after flashing your rom i will tell you about arabic to have full full functions..
Im an average PDA guy, I really dun know what do you mean by flash it... plus how would i do that? Do i have to connect my device through USB and then do it? what software will do the update
How can I upgrade it to WM6 after that?
Bro
I'm sorry i have to go now...alfajr prayer then sleeping...inshalla after a few hours i will be at office and i will continue with you ...by the way , 2.10.06 is wm6 with new features and better speed that any other rom..and the battery will be so s so great....and radio reception and stability.....i'm uploading this combination to rapidshare now ....hope within half hour upload will finish and then you can update directly withut merging files from here and there...if you are patient you can download onefile....
for arabic i will also send you imaginet 343..its so better than the default version....its right to left also..you will not have any difficulty to delete any letter in the message like before...and the keyboard will be functional....
Salam
Nedal
Will have the video call and other featuers after updating it?
To be honest I have never done experiments with the device exept updating the ROM once from the club Imate website so juz being cautios u know
ok bro
then wait till morning and the file uploading will be finished,,,that time , you will just connect your jasjar to computer and just clicking romupgrade file , then update process will begin till then end...after that you will have wm6 on your jasjar and radio 1.17
video call is not working with this version, but you can use HTC_VideoCAll , maybe it can do video call for you...i didn't try it, but i don't video call...
Salam
Thx dude, I will also go to sleep after Fajer prayer then will be in office after couple of hours u know its Ramadans and timings r different.
I really appricate your help bro.. thx a million.. will continue with you from office enshallah
hello guyz
walah i found this forum by mistake i think am lucky to find it , i used PDA2 all that time .. and jst changed to jasjar 2 days ago .. and i wanna update it .. its used .. anyway it doesnt hang or anything its clean, i jst want to update to wm6 and update the roms .. wat i found is vista doesnt accept activesync and the Windows Mobile Device center doesnt work !! dunno why anyway mashalah nedal u look like an expert .. i dunno wat to do exactly and the files u sent alrdy downloaded them .. so if u help him ur helpin me too thanks alot ^^, every option u said is great and the arabic fully functioned is perfect but only the Video call .. i needed it .. il try the HTC but after updating everything so please proceed and thanks alot bro =)
btw jst for the info ... the pass for the rar file is PDAVIET
and btw how to flash !! if u can tell us please and after that wat shall we do ..
from my name u can know am a Newbie
Salami
nfqa said:
ok bro
then wait till morning and the file uploading will be finished,,,that time , you will just connect your jasjar to computer and just clicking romupgrade file , then update process will begin till then end...after that you will have wm6 on your jasjar and radio 1.17
video call is not working with this version, but you can use HTC_VideoCAll , maybe it can do video call for you...i didn't try it, but i don't video call...
Salam
Click to expand...
Click to collapse
Did the upload finished? I will try HTC Video Call.. once the update process get done successfully..
Nedal waitin to hear you
Salam
Mr. UAE, actually I'm not expert, i have some little experience and i wish it will help all.
first of all : the best ROM for me till now is PDA viet 2.10.6 with Radio 1.17 , i have tried all PDA Viet , Helmi,midget,leo,ivan,kdskamal,darkeforce.....etc
its the best for me, without any hang ,without any crash...and battery performance so much better (but you have to make some settings on your windows mobile when using it)
i have upload it here http://rapidshare.com/files/58117814/Nedal_PV2_10_6.rar
with this file , you will find update files , Arabic v343 ,and keyboard files.
after you update your jasjar , copy the folders jasjarbn343 and arabickeyboard to your memory card, then from inside the folder jasjarbn343 run the first two files (1ACERTOEMTahoma_KJ ,2ACERT2OEM_KJ) the other files are for extra files for prayertimes ,hijri calendar and dictionary .
after you do the previous steps , you should use resco explorer or total commander to copy the files inside arabickeyboard folder to your windows folder, accept overwrite.
second, uae, thanks my dear for your words ,if your jasjar is going fine with wm5 why to change to wm6? if you want wm6 , i recommend using only the one i uploaded.
for windows vista and activesync...you have to copy some files to your computer , the driver files ...its so easy and in this forum there is a separate thread about this.
Salam
okay i thnk my jasjar is done ... !! i did the flash thing u told me about and it got an error in the middle .. so now my jasjar doesnt work anymore .. only shows USB .. and v0.60 at the bottom i cant flash it again .. i think its gone right ?? no way to fix it .. well i hope ther is but i rly started to cry -.- !!
uaenoob said:
okay i thnk my jasjar is done ... !! i did the flash thing u told me about and it got an error in the middle .. so now my jasjar doesnt work anymore .. only shows USB .. and v0.60 at the bottom i cant flash it again .. i think its gone right ?? no way to fix it .. well i hope ther is but i rly started to cry -.- !!
Click to expand...
Click to collapse
nothing happened my Dear....you need the update the bootloader from here http://www.4shared.com/file/25010359/7a6a71a7/JASJAR_BL101_RUU_v12.html
and after bootloader update , upgrade your rom normally another time, inshalla everything will be fine, and tell me what happen
Salam
nfqa said:
nothing happened my Dear....you need the update the bootloader from here http://www.4shared.com/file/25010359/7a6a71a7/JASJAR_BL101_RUU_v12.html
and tell me what happen
Click to expand...
Click to collapse
man i tried it .. didnt work ,
it says check the cable from both sides .. its in alrdy and workin fine
and says switch on ur fone .. which i cant .. it doesnt switch on ..
and please check ur private msg
okay thanks alot .. done installing wm6 on it and am gonna install the arabic lang and let u know asap .. thanks alot nedal for ur help
uaenoob said:
okay thanks alot .. done installing wm6 on it and am gonna install the arabic lang and let u know asap .. thanks alot nedal for ur help
Click to expand...
Click to collapse
Hi,
Could you tell me how did you solved your problem? Please share it with here so that it could help others as well...
Please tell me on what setups you took and where did you got error? I will do the updates today after working like 4pm I hope to see your response by then so that I could take care of this update smoothly...
Thank you in advance
Mr. UAE guess u r not here.. I need to do the grade within in 30 mins can you post me solution to the problem you faced?
Nadel.. Can you please hint about what issues I could face so that I dun get panic in case if I see something different..
I appreciate all your time and help and Jaza kum allah b5air
hey
devil , its jst happened cuz i have windows visita and using windows mobile device .. and thats it .. well i found the solution here in this forum , plus who really helped me is nfqa ( nedal ) .. what happend to me is like this exactly
http://forum.xda-developers.com/archive/index.php/t-245131.html
http://forum.xda-developers.com/archive/index.php/t-259003-p-2.html
its workin fine now .. wm6 and arabic enabled .. but no videocall .. ill try to look for hlc and tell u wat will happen with me
EDIT 17 Nov 2007
Thanks to Jiggs, ViVi, Ervius, and anyone that help me out !!
Version 17 Nov 2007
Final Version for OS 5.2.1933
- Fixed All Bugs
http://www.uploading.com/files/U8RXQU3P/P51_neogin_17NOV2007_FINAL.rar.html
http://rapidshare.com/files/70269084/P51_neogin_17NOV2007_FINAL.rar.html
Benq P51 TouchFlo Touch IT
I just almost seen your video about p51 with TouchFlo, this is include in this new version?
Tha last previous version (wm6) have a liltte bugs when you plug the cable to charge, (not responding the screen or any button) in this rom is this solved?
Thank you for your efford and your time!!!!
I have already installed and works very fine!
You has done a very excellent work.
GREAT,neogin.
vivi
Hey Neogin. is the touchflo fully working? i remember using any of the touchflo on any p51 rom will freeze the device when u put it on standby? anyway im downloading it now to try it out. hopefully it works now..
Cutefox said:
Hey Neogin. is the touchflo fully working? i remember using any of the touchflo on any p51 rom will freeze the device when u put it on standby? anyway im downloading it now to try it out. hopefully it works now..
Click to expand...
Click to collapse
good news ..
no freeze !!
Just a few bugs... (not a big deal)
1. When a call or a message arrived...the led dont blinking red...
2. The bar of battery on the upside is always full even if the battery is empty...
I will continue testin'...
Again...Excellent Work!
did u use the new one ?
i just uploaded it today ..
yep .. previous version has bugs ..
you shouldn't see the battery icon .. i remove to clock instead !!
hi neogin, just flash it. it actually hanged when u put the device on standby. wait a few minutes after u switch it off so that S2U wont wake the device up when u press any button, and press the power button to wake it up. mine wont wake up at all.
yeah i just found out about that too ..
the problem comes from FTouchFlo ..
don't use it .. you can remap the left button with any programs ..
yea so i guess its a touchflo thing and not ur rom since it was like that with all your other rom.. its a shame since u almost got everything working.. good work so far thou!!
i have to admit that .. most of the previous rom .. i stole it from here and rework them all .. were not the perfect clean rom ..
only the clean rom .. i prefer that ..
but u see !!
most of the clean rom that i thought that they were CLEAN ..
not clean .. so, most of the rom here i can say that they are not clean ..
got bugs .. more like .. one part is new .. and add up to their rom and say that
this is newest OS .. blah blah ..
these bugs are hard to catch .. very hard ..
i spent my time reading all registry over and over .. study them ..
still can't fix it .. i'm still a noob .. so sad ..
but some roms are really clean .. i like those clean rom too .. just like u ..
easy for me to rework .. Bepe always give us clean one ..
i hope there are people like him in our society .. it's nice to live with ..
Version 17 Nov 2007
Final Version for OS 5.2.1933
- Fixed All Bugs
http://www.uploading.com/files/U8RXQU3P/P51_neogin_17NOV2007_FINAL.rar.html
http://rapidshare.com/files/70269084/P51_neogin_17NOV2007_FINAL.rar.html
In this last version i cannot install the last update for 2sus. (S2U2-0.85-WM5)
It gives me this message:
Installation was unsuccesful. The program or setting cannot be installed because it does not have sufficient system permissions.
Could you install this in this last rom? THnxs!!!
neogin what's up man? Where are you?
Help us with the installation of the last s2u2 in this last rom.
I must be doing something wrong because I cannot install this. I followed the directions but all the phone ever says is "USB Connected". Any thoughts?
I'm running Vista btw.
lakers8833 the procedure only works in WinXP...
Ok got it to work. Thanks farfanet!
hi. i update the rom yesterday to my p51 but a got some issues.
-the red tray icon on the right botom to turn on/off wlan suddenly disapair, cant enable it.
-when i use stereo bluetoot A2DP (HBH-DS220 & HBH-DS970 sonyericsson) in media player it bleep for 5-8 seconds and skips to the next song after 15-25 segs.
Neogin could you fix it please i use to hear my music whit this sweeties .
one more thing where i can get the Radio Rom 1.09 ???
Neogin,
great work on the remarkable improvements.
I am also wondering where the 1.09 radio ROM is.
thanks in advance!
george
Hi All !!
First - Thanks alot for this forum! it's the BEST!
I'm currently using PDACornerPro.V27 on my TyTN. but the same error happend with Schaps, Corner v20 and another TouchFLO rom.
Whenever I install Paragon LENG hebrew support on my device it just disables any way of accessing the Phone Dialer and the Contacts. Removing it doesn't work either, once installed - it f#$ks it up for good.
I've tried searching the registry with no luck whatsoever...
Can any of you Hermes Gurus help me out here?
Thanks!
hebrew on tytn wm6
NEW HEBREW BY ME:
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
don't use the LENG hebrew,in addition to the problems u describe, its doesnt support the hardware keyboard of tytn.
personally this is what i do:
1.install Hebcert.cab from orange extended rom(attached below)
2.install 180407_HebrewTyTN.cab but DONT restart when prompted.
3.goto Progs. Lang setting(hagdarot safa 3 letters icon alef bet gimel) change the upper bar from the top option to buttom(it suppose to say interface lang. and the upper is hebrew the other is english but you cant c before reset)
4.now press (x) to reset
//////note: u dont have contacts hebrew browsing in the normal contact manager,
so use pocketCM with the setting.ini file i attached(just put in the pcm folder in progam files
//////also u dont have smart dialling for hebrew, so use this one jimmy98 made for us its works great with htc touch dialer also attached below(u can use different skin with hebrew letters).
ENJOY
Nimitz.
http://www.pocketcm.com/downloadfile.php?f=PocketCM-0.27.zip
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
Thank you so much!
haven't tried it yet since it requires me to flash a new rom, I'll get to it this weekend.
anyhow, thanks alot, it's nice to have a supporting community.
bekef dude
u know u can hard-reset right? that way u dont have to flash anew rom
but if u feel like changing anyways i recommend this ones:
http://forum.xda-developers.com/showthread.php?t=428597
http://forum.xda-developers.com/showthread.php?t=439973
i use the last one cause its lighter but if u dont feel like working much go with the first it has everything plus youtube and google maps etc.
Yeah, I know I can Hard Reset.. but I've been meaning to change to a new rom for sometime now, and Hard Reset will make me install everything all over again so I used the opportunity to flash.
I have a problem with the hebrew, Maybe you came across it too - after installing the hebrew, When I press the power button the device goes to standby and when I press the power again it doesn't get out of it until I soft reset it...
It renders the device quite useless..
P.S I've flashed the device with the rom u've recommended. it's reallllly fast.
Tytn Doesnt wake up
its a known issue hate it when that happens
you can read more here:
http://forum.xda-developers.com/showthread.php?t=273836
it happened to me a few times i still havent figuered out why,
but thebest solution is to change the rom,
try falshing another rom i'm working with the lighter one ive posted and it works smooth havent tried the other so i guess thats the one you flashed.
good luck
No luck... so far I've tried with 4 different ROMs and didn't succeed in any attempt, I've tried both of the ROMs you've recommended, PdaCorner v.27 RBSN 3G and CRC dev 14.1 beta... as I said, The hebrew installs fine but once the device goes to standby/power saving it just dies...
I've tried doing what the post you've ref'd me to offered - disabling the advance network features on the pc-usb connection and removing some addons like the Voice-Commander... no luck either... been at it all night
is it possible that HebCert.cab or 180407_HebrewTyTN.cab you've attached are not of the right version?
The Hebrew is WAAAAAAY better than Paragon's LENG (as long as the device stays on) that doesn't even let me use Opera past ver8.6, and I'd really hate to give it up.
Please advise..
the version of the hebrew is from my phone but is identical to the hebrew cabs from other orange tytn phones.
+iv'e dumped my ext.rom like a year ago then my phone broke (physicly) just last week and
the new tytn orange gave me had the same exact cabs for hebrew
(with almost the same rom newer version but wm5 uglyass green lame-o)
so that's not it for sure..
++it happened to me as well with several roms with the same hebrew cabs
for no apparent reason but now it works just fine.
+++u can always go back (assuming u backedup)to the original orange rom
that came with your tytn and dump the hebrew cabs from your ext.rom though it will be a waste of time.
one thing i did that help with the PDAcorner's older version with this problem was to update the HARD-SPL version to 2.3
..so check your spl version by reseting to the bootloader
(reset while holding the power button and the top left ok button)
if its lower than 1.40 theres a big chance an update would do the job..
http://www.mrvanx.org/thg/
update to 2.1 or to the latest then reflash i suggest to http://forum.xda-developers.com/showthread.php?t=439973
cause we know it works for sure.
+don't install nothing not even the hebrew..check if the device wakes then install ONLY the hebcert(btw:u install this first always) and main file but change the interface language before reset so it wont boot with hebrew menus even once..post back if the problem presists.. good luck
I Refuse to give up!!
Well, I did everything you offered, bit by bit -
1. Updated to HardSPL 2.1
2. Flashed to HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V5_WWE_12.11.2008
3. Did an ON and OFF tests, few times - after power off, soft reset eg.. (ps I found out that Soft Reset from the os doesn't work either after the hebrew installation - so I checked that too) - all worked fine.
4. I've installed the HebCert.cab and then the main file.
5. changed the interface language to english.
6. Reset and voila... same bug all over again
I thought maybe it had something to do with installing the hebrew while the tytn is connected to activesync so i did all that without it being so.
got any more ideas?
# _
listen this time youll get it stright,..
i think its all cause you got the WRONG rom..
i saw you wrote "HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V5_WWE_12.11.2 008" rom while i was talking about:
27/10/2008 ROM 3.62.502.20 (Manila2D) V.20 Build 20921 by PhamQuang
http://rapidshare.com/files/157947939/HERMES_WWE_3.62.502.20_B20921_Manila2D.rar as the lighter rom installed
anyways i felt kinda guilty cause i recommended it (though i told you i havent tested it but i guess you didnt understand to which one i was refferin)
so i flashed the rom you were talking about just to check
and suprise suprise my tytn didnt wake same as yours..
reflashed back to 27/10/2008 ROM 3.62.502.20 (Manila2D) V.20 Build 20921 by PhamQuang(http://forum.xda-developers.com/showthread.php?t=439973)
and TA-DA works like a charm..
so i would suggest to repeat the same stages as from your last message only this time with the right one
good luck buddy im sure this time itll work
btw the password for the file ishamQuang
If I haven't said it so far - thank you ever so much for your time and effort.
Well, I did write the name of that rom but I've tried both roms on the same process...
I did, however, manage to get some progress on another angle - I've updated my radio version (was the only thing we didn't cover) and now it works with the Manila2D rom. alas, nothing else seems to be working...
I've started to install all my favorite progies (Adobe Reader LE, PocketRAR, SPB Insight, JBED, Opera Mobile, Opera Mini, etc...) and everytime the darn phone hangs on one of the installation and just DIES... only hard reset can revive it...
I'm gonna start from scratch - tomorrow I'm gonna take a naked rom and start building on top of it... I must be doing something wrong. only good indication is that the phone can get in and out of standby WITH the your hebrew version - so I know the hebrew is ok.
I'll go thru with it tomorrow and keep you posted.
again, I really appreciate your efforts to help. thanks.
your very welcome.. to be honest its just cause were both israellis and also because i went through this crap myself but no one here could really help me i had to solve it myself..
i DID forget to tell you the first thing i did to the phone was to SUPERCID unlock it:
http://pof.eslack.org/hermes-unlocker/http://pof.eslack.org/hermes-unlocker/
try it if you havent already, mayb the protection is whats causin all the freezes. plus its unlocks the sim bull****.
GL again
BTW:
you dont need to install opera for manilla2d:
http://forum.xda-developers.com/showpost.php?p=2860699&postcount=4764
or use the file ive attached.
plus its better lookin htc version.
and use this as the PDF reader 100x faster than adobe:
http://forum.xda-developers.com/showthread.php?t=425268
http://www.4shared.com/file/69693567/504106d/Update_20.html?dirPwdVerified=2117bcd2http://www.4shared.com/file/69693567/504106d/Update_20.html?dirPwdVerified=2117bcd2
Great (Partial) Success!!
Ok! here's what I did and some conclusions I've come to:
1. flashed CRC r14.1 Big Storage ROM.
2. Installed ALLLLLLLLLLLL of the app's I needed prior to the hebrew installation.
3. Cleared all Caches, Temps, and MRU lists etc using SKtools.
4. Clean Start the device (SR).
5. Installed the hebrew, changed interface language and Soft reset.
6. Enjoyed my new revived device!!
now the only thing that DOES go wrong is the Java emulation, I've tried all available versions of Esmertec Jave (20080222 3.1M, 20080328.31 and 20080428.2.1) Tried installing to the device and to the SD and didn't succeed. I also tried to use the Device Update feature of CRC to get the latest java version from thier repository... didn't succeed either.
The thing is, before the hebrew was installed all versions worked fine, and after that NONE did...
I also think that this piece of software is what causing the device to die!!
After I remove the java emulator the device just hangs on the boot screen.
I've flashed my device numerous times with a whole bounch of ROMs, The conclusion I came to is that the hebrew worked on MOST of the ROMS didn't have JBED pre-installaed!
I would have checked it but I'm tired from flashing and installing stuff on my device for now, maybe next month... I gave up on using OperaMini since I don't have a working java emulator currently.
Which, if any, are u using?
Thanks for all the pieces of software you've recommended, I tried the PDF reader you suggested and I like Acrobat LE 2.5 Diamond edition better.,,
Anyhow - It's working now. so as my project instructor said - if it works - don't touch it!
Thanks alot for now! I WILL try to isolate the problem and keep you posted!
I Owe you man..
http://forum.xda-developers.com/showpost.php?p=1487409&postcount=67http://forum.xda-developers.com/showpost.php?p=1487409&postcount=67
http://www-jpc.physics.ox.ac.uk/ge
tjpc.html
i use it only when i get bored and start messin with stuff..
glad to hear u finnaly naild it
feel free to ask or recommend stuff to me espcially hebrew ot israel stuff
c u on the flipside
btw: i just found out something cool when you hold the green talk button from 2 sec it turns on/ff the speakerphone
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
badnimits said:
NEW HEBREW BY ME:
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
don't use the LENG hebrew,in addition to the problems u describe, its doesnt support the hardware keyboard of tytn.
personally this is what i do:
1.install Hebcert.cab from orange extended rom(attached below)
2.install 180407_HebrewTyTN.cab but DONT restart when prompted.
3.goto Progs. Lang setting(hagdarot safa 3 letters icon alef bet gimel) change the upper bar from the top option to buttom(it suppose to say interface lang. and the upper is hebrew the other is english but you cant c before reset)
4.now press (x) to reset
//////note: u dont have contacts hebrew browsing in the normal contact manager,
so use pocketCM with the setting.ini file i attached(just put in the pcm folder in progam files
//////also u dont have smart dialling for hebrew, so use this one jimmy98 made for us its works great with htc touch dialer also attached below(u can use different skin with hebrew letters).
ENJOY
Nimitz.
http://www.pocketcm.com/downloadfile.php?f=PocketCM-0.27.zip
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
Click to expand...
Click to collapse
Shalom,
Do you know if it works on an HTC Dual Touch with Windows Mobile 6.1 US ?
The HTC Dialer above is 2G version?
Are there any 3G version for WM 6.1?
Thanks
I have P3300 with original windows mobile but I would like to update in some other OS, like windows phone 7 or andoir that works perfectly. Becouse I had downloaded android but it's very slow and I wasn't vibrator, sound, wireless. I don't know mabe I must download a drivers for android system that works everything perfectly.
...
as far as i know, android is very buggy.
wm7 will not and cannot run on the artemis/p3300.
however if you want wm6.5 or 6.1 the artemis can be flashed to this..
firstly you will need USPL 1.11.cmon
(click it in my signature to download it)
(i have put a tutorial inside the download)
once you have done USPL you can flash any rom to the artemis..
i would recomend andrew82's rom but that wm6.1..
if you want wm6.5 i would recomend babeluts rom..
i was running wm6.1 on htc s620 , then i flash to wm6.5 , the phone freeze on htc start up screen , and i can't flash any rom again , and the phone don't open , can anyone help ?
i also can't connect my s620 through activesync to flash any rom
ahmed fahmy said:
i also can't connect my s620 through activesync to flash any rom
Click to expand...
Click to collapse
You should only follow a tutorial unbricking Excalibur by ookba, to be able to get the device back to normal and also perform upgrade..
from here you can get started ~ http://forum.xda-developers.com/showthread.php?t=540492
thnxxxx bro , it works great
glad to see someone manages to solve the problems on the device...
Closed since this just needed a minimum search in the sticky.