[Q] defy not start with CM help - Defy General

Hi All Dear Members Today :S i Drop phone becuase i try to unlock but :S when i restart it is no work
PLEASE help it is no my pphone
see on youtube youtu.be/iUbE3digF5o
thanks in advance

Please tell what you did... (with links to posts it threats is the best way)
It's a bit confusing
Sent from my MB525

bro i fllow this step in this post>>
hotukdeals.com/deals/motorola-defy-payg-99-99-compulsary-10-00-topup-orange-shop-1104611?p=13425731
Click to expand...
Click to collapse
343
but i make an mistake in this step >>
[1.3] Installing Cyanogen Mod 7.1.0
(Cyanogen Mod 7.1.0 zip and Gapps zip files required)
You will need to download Cyanogen Mod 7.1.0 and Gapps. Put these on your MicroSD card. Now you need to boot into 2nd init recovery. Do this by turning on your phone and pressing the Volume down button when you see the blue status LED light.
Once inside, use the volume up and down buttons to navigate, and the power button to select. Firstly, you can backup here by going to "Backup and restore" and selecting "Backup (all)". Then "go back" to the main menu and select "Wipe data/factory reset". Once this is successful, select "Wipe cache partition". Now you select "Install zip from sdcard" and install Cyanogen first by selecting the file. After this, install Gapps.
Your phone should now start with a red Motorola icon with a wasp stating cyanogen defy 7.1-11 with the LEDs flashing blue and then green before displaying a blue cyanogen mod logo with the swirling animation. This will then lead into setup, meaning your install was successful!
[Note: CM 7.1.0 comes with the latest version of 2nd init recovery]
[1.4] Soft unlocking your Defy
(bp_ptc file and Root Browser Lite required)
Firstly, you will want to backup your system again. To do this, turn off your phone and when it's on the first Motorola logo, press Volume down when the blue LED light flashes. Then select "Backup and restore" and select "Backup (all)".
Then boot back normally and download the bp_unlock file and extract the file and copy the file "bp_ptc" to your MicroSD card and ignore all the other folders and files. Now search for Root Browser Lite in the Market and open it and enable the root features when it asks by pressing "Yes" and allow SuperUser access. Press the Home button on the top left and select "SD card" and look for bp_ptc and highlight it by holding your finger on it and selecting "Copy". Now press on the Home button again at the top and select "Home" and scroll down to system > bin and press "Paste". Now go back to the previous parent folder by pressing the green arrow and select bootmenu > 2nd-init.
Here, look for the file init.mapphone_umts.rc and long press on it and select "Open in text editor" Scroll down until you get to "service usbd /system/bin/usbd" (about 10 medium flicks) and just after it, enter "service bp-ptc /system/bin/bp.ptc user root group root user root" on a line underneath it. Now press the "Save" button.
Bro i Reboot phone and in boot i Choose to install from SDcard with Gapps.zip AND when i see only logo in device, can you see in youtube video.
I hope to have understood

Download one of the latest CM7 nightlys, put out on your sd, go to custom recovery (vol down on let...). There, wipe data/cache and flash the zip. Reboot (if you get stuck for more than 10 min on the turning boot logo, press both volume buttons + power = hot reboot). If you can't boot the second time, just tell. Normally you don't have to do anything to softunlock in CM7.
Sent from my MB525

I followed the inscrutions to soft unlock my defy, but there are a couple of typos in the post on hotukdeals (. instead of _ in the file name):
you need to edit the file to look like this:
service usbd /system/bin/usbd
user root
service bp-ptc /system/bin/bp_ptc
user root
group root
service nvm-daemon /system/bin/nvm_daemon
user root
group radio
Thanks

thank you very much my problem is solved
but I have a question
how tu unlock all networks
Thanks labsin

Have you installed a recent nightly? I thought you didn't have to do anything else. I could be wrong (don't have a locket one).
Please post if it works/doesn't work our you have a question.
Sent from my MB525

Hi Bro.
I Download and Install in defy CM9 from defy-net
CM9-ICS-MR1-120210-jordan-2.2-Quarx.zip
it works but
not unlock sim
can you help me

Related

[Q] How to change ROMs

have found several pages with info but none for the HTC slide. So I don't know if it is recommended to follow any of those.
I installed the CM 6 on my slide and I don't really like it. I found another ROM that I would like to try but have NO CLUE how to do it.
Can someone point me in the right direction; either via a website or a step by step guide here?
Thanks a million
download ROM to your computer and put it on your SD card without unzipping it. go to market and download ROM Manager > open app > select "Flash ClockworkMod Recovery" and tap myTouch Slide > select "Reboot into Recovery". phone will power down and boot itself in to recovery. select wipe data/factory reset > under "advanced" select "wipe Dalvik Cache" > go back to main menu > select "install zip from sdcard" > select "choose zip from sdcard" > scroll through list till you find your ROM and select it > after it is done installing go back to main menu and select "reboot system now" > enjoy new ROM
edit 1 : when in recovery use volume button to scroll up and down, trackpad is enter and back arrow is back.
edit 2 : you can also flash Overclock Kernels the same way... just skip ALL of the wipes
RavenWulf said:
download ROM to your computer and put it on your SD card without unzipping it. go to market and download ROM Manager > open app > select "Flash ClockworkMod Recovery" and tap myTouch Slide > select "Reboot into Recovery". phone will power down and boot itself in to recovery. select wipe data/factory reset > under "advanced" select "wipe Dalvik Cache" > go back to main menu > select "install zip from sdcard" > select "choose zip from sdcard" > scroll through list till you find your ROM and select it > after it is done installing go back to main menu and select "reboot system now" > enjoy new ROM
edit 1 : when in recovery use volume button to scroll up and down, trackpad is enter and back arrow is back.
edit 2 : you can also flash Overclock Kernels the same way... just skip ALL of the wipes
Click to expand...
Click to collapse
You are one in a million!!
Doing this now ... will report once done
Edit - what do you mean by Overclock kernels?
CM 6 does not have market ....=/ how do I get the app now?!?!
Here is link to post to get latest Gapps (for market) you will have to get into recovery the way you did to flash CM6)
As far overclock click link in my sig for more info
edit : the GApps link will auto download when you click it
A couple notes on switching between ROMs:
1: when going from one ROM to another, very few allow you to simply install on top of an existing ROM, thus requiring you to wipe the phone from recovery
2: When you do a wipe, you will also need to remember to install the Google Applications ("gapps"). Link for gapps is in the post above me.
Thank you fermunky and raven!! =D I'll look into that in a second.
OK so I booted into recovery and selected "wipe data/factory reset " but the screen has been black for about 5 min now =/ is that normal?
Edit - I went the "brave path" and simply lightly pushed the power button and the screen came up. OK, so I am continuing the process =)
Edit 2 - does the update.zip need to be applied at all?
ROM manager recovery
I have gotten through to trying to reboot in recovery mode through the rom manager. However, when I press the choice to reboot in recovery through the program, nothing happens. Any suggestions?
arcybarrios said:
Thank you fermunky and raven!! =D I'll look into that in a second.
OK so I booted into recovery and selected "wipe data/factory reset " but the screen has been black for about 5 min now =/ is that normal?
Edit - I went the "brave path" and simply lightly pushed the power button and the screen came up. OK, so I am continuing the process =)
Edit 2 - does the update.zip need to be applied at all?
Click to expand...
Click to collapse
nope don't need update.zip if you have ROM Manager. what did you press when selecting? power or the track pad? just asking because the track pad is enter/select, power turns off screen.
RavenWulf said:
nope don't need update.zip if you have ROM Manager. what did you press when selecting? power or the track pad? just asking because the track pad is enter/select, power turns off screen.
Click to expand...
Click to collapse
Good to know I didn't need to do the update.zip =)
I think I might have have used the power as I had done so through the root process but when I touched the power key again the screen came back up instantly and used the track pad from there on.
Raven I OWE you big time!!!!! You have been EXTREMELY helpful. The instructions you gave me were to a T and easy to follow. I found that the Rom Manager was already loaded on the CM 6.
I think this is a great easy to follow post for other noobs and or anyone wanting to change roms with no previous experience!
I just broke down your initial post line by line as it was easier to my eyes/brain lol
1. download ROM to your computer and put it on your SD card without unzipping it.
2. go to market and download ROM Manager
3. open app
4. select "Flash ClockworkMod Recovery" and tap myTouch Slide
5. select "Reboot into Recovery".
Phone will power down and boot itself in to recovery.
(when in recovery use volume button to scroll up and down, trackpad is enter and back arrow is back.)
6. select wipe data/factory reset
7. under "advanced" select "wipe Dalvik Cache"
8. go back to main menu
9. select "install zip from sdcard"
10. select "choose zip from sdcard"
11. scroll through list till you find your ROM and select it
12. after it is done installing go back to main menu and select "reboot system now"
Enjoy new ROM
Edit - BTW I replaced the CM 6 with this one http://forum.xda-developers.com/showthread.php?t=784241
Roboito said:
I have gotten through to trying to reboot in recovery mode through the rom manager. However, when I press the choice to reboot in recovery through the program, nothing happens. Any suggestions?
Click to expand...
Click to collapse
I'll ask the same thing Raven asked me; did you use the track pad to do the selection or did you use the power key?
If you used the power then I think that could be it. Try the track pad as it is what worked for me
Roboito said:
I have gotten through to trying to reboot in recovery mode through the rom manager. However, when I press the choice to reboot in recovery through the program, nothing happens. Any suggestions?
Click to expand...
Click to collapse
did you tap "flash ClockworMod Recovery" before trying to reboot into recovery? if not tap that and tap "myTouch Slide" when it pops up and then tap "reboot into recovery"
edit : this might be a dumb question... you are rooted right?
What types of ROM works for the Mytouch Slide? (Ex: would a ROM meant for the G1 work? Any examples of multi-phone capable ROMs?)
Sent from my rooted T-Mobile myTouch 3G Slide using XDA App
saynotopunx said:
What types of ROM works for the Mytouch Slide? (Ex: would a ROM meant for the G1 work? Any examples of multi-phone capable ROMs?)
Sent from my rooted T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
The only ROMs that will work are the ones in the "Development" section for the myTouch Slide, ROMs for any other phone will crash your phone.
Poop. I didn't think so... thanks.
Sent from my T-Mobile myTouch 3G Slide using XDA App

CM6 Bootloader Loop Error! EVO 4G

I Have An Evo 4G, Rooted With UnrEVOked Forever. Used Rom Manager to Install Clockmod Recovery And To Install Cyanogen Mod 6. Before This, I Put a PC36IMG zip that had Splash1 in it, from the unrevoked site and instead of saying HTC EVO 4G in a bright white screen, its UNREVOKED with bright white screen. it then goes into a cyanogen mod bootloader animation that i got off the market called Boot changer lite or something? and it loops over and over showing either the cyanogen mod title, or it just gets to the cyan dude with a skateboard but freezes. i tried putting different PC36IMG files and using clockmod recovery to push it on sd and load it, but it says
-- Installing: /sdcard/PC36IMG.zip
Finding update package...
Opening update package...
Installing Update...
Installation Aborted.
HELP ME PLEASE!!!
Flash a stock rooted ROM from http://goo-inside.me/evo/stock/ and then using ROM Manager, flash the alternate recovery (Amon_RA Recovery 1.8.0), then download CyanogenMod 6.1.2 ( http://goo-inside.me/cm/supersonic/stable/ ), copy it to the root of your SD card, remove any PC36IMG.zip, boot into recovery, and flash the ZIP from there.
how do i use rom manager when my screen is looping the boot animation over and over? i can flash stock rooted rom using clockwork recovery 3.0.0.2, and flash the recovery amon_RA? im sorry i am a noob and i would ask for step by step, not very detailed but to where i can know what to do first, if you have time?
1) Flash the stock rooted 3.70.651.1 ROM from my link above (here it is again), via ClockworkMod Recovery.
I'm going to assume you have an older phone with the older partition structure. For more information, and to tell what structure you have, check out this thread once you complete Step 1, before you do Step 2. I'm also going to assume you have the Android SDK installed and set up. If you do, just open your Command Prompt, cd to your SDK\platform-tools folder, and run the command "adb shell cat /proc/mtd" (without the quotes). If you see an erase size of 20000, then continue. If you see 40000, STOP and let us know.
DO NOT CONTINUE IF YOU HAVE THE NEW PARTITION ERASE SIZE OF 40000!
2) Once you boot up into the ROM, download ROM Manager from the Market, if it's not already included in the ROM. You will of course have to add your Google account in order to access the Market.
3) Open ROM Manager, scroll to the bottom, and tap "Flash Alternate Recovery"
4a) Once it has finished flashing, download CyanogenMod 6.1.2 using your browser at the above link (here's the link again). You'll want the file update-cm-6.1.2-Supersonic-signed.zip.
4b) Also download the attached FORMAT_ALL.zip. This will help ensure you don't have any files from Sense accidentally carry over into CM.
4c) Finally, download the latest HDPI Google Apps package from here (the latest one has a link at the top of the page, and is the gapps-hdpi-20101114-signed.zip file).
5a) If you downloaded via your phone, use a file manager of your choice (I like Root Explorer, but there's free ones like OI File Manager in the Market) to move the three ZIPs from /sdcard/download/ to /sdcard/ (aka, the root of your SD card).
5b) If you downloaded via your computer, attach your phone to your computer via USB, turn on Disk mode, and copy the three ZIP files to the root of your SD card.
6) Power off your phone, then hold down Volume Down and Power to turn it back on. If you're taken to a white screen with skating Androids on the bottom (aka, hboot), then press Volume Down until RECOVERY is highlighted, then press the power button.
7) You should now be at a black screen with yellow text. This is Amon_RA recovery. Press Volume Down until you highlight Backup/Restore, and press Power. Press Volume Down and highly Nand Backup, and press Power again. Press Power one more time to confirm the start of the backup. It'll then take a few minutes to perform the backup (depending on how fast your SD card is).
8) Once it's done, you'll be back at the Backup/Restore menu. Make sure Return is highlighted, then press Power. Press Volume Down until Flash zip from sdcard is highlighted, then press Power to select it. Use Volume Down to highlight FORMAT_ALL.zip and press Power twice to select it, then confirm the flash.
9) Once that's done, scroll back to Flash zip from sdcard, then select update-cm-6.1.2-Supersonic-signed.zip. Press Power twice to select then confirm it.
10) Finally, go back to the Flash zip from sdcard menu one last time, highlight gapps-hdpi-20101114-signed.zip, and press power twice to select and confirm.
11) Finally, select Reboot phone now, and wait. The first boot will be a few minutes (it has to rebuild its caches), but after it's loaded, the Tutorial "Welcome to your PC36100" screen will show up. Congratulations, you have CyanogenMod!
thanks aloottt mate! cm6 is runnning amazing, but where can i get my gapps back? just the gapps, i downloaded "youtube" and "mail!" but i click the app and it says Force Close Everytime? i have angry birds and all from custom downloads and theyre fine, just the gapps is what i want. can i get the market at least? or a substitute like appbrain?
If you followed the directions I gave, it tells you to download the gapps package, and flash it. Make sure you flash the HDPI package only, not the MDPI or MDPI-tiny.

WHOLE TUTOriAL TO HTC SENSE LEGACY

I will take everything from zero but I am not responsible if you brick your Defy.
WARNING!!! This rom can burn your flash.
WARNING!!! By using this tutorial you will lose all of your data so back it up!! using programs like Titanium Backup or others.
1. Install Moto Drivers
2. Install RSDLite
3. Put Defy in bootloader mode by turning your mobile off and then turn it on by holding in the same time VOL+ and the power buton and ont she screen will say
Bootloader 09.01
Baterry OK
OK to Program
Connect USB
Data Cable
4. Connect your Defy to the pc and open RSD Lite. Your phone shoud appear as connected.
5. Browse for this sbf by pressing "..." button, click start button and wait
6. Afther the instalation is finish your defy will try to boot but will remain stuck on the Android loading screen, bull the baterry out and power it up by ppressing Power and VOL- buttons in the same time that will open the recovery screen, press in the same time VOL+ and VOL- buttons to show the menu.
Select the "wipe data/factory reset" by moving whit the volume keys and select whit the power button, then select yer -- delete all user data. Afther it is finish the recovery menu will apear again and select "reboot system now"
7. Go to Settings ->Applications -> Development -> Select USB debugging ( a warning will apear select OK)
Root the device whit SuperOneClick by opening the program, press root and then wait to tell you that is rooted and then reboot.
8. Install SndInitDefy _2.0 apk by pooting on the card and bowse for it whit file manager.
9. Run Defy 2ndInit and install the latest 1.0.7. Will ask for root acces and click allow. This will finish whit a succes messege. You have to be connected to internet when doing this step.
10. Create on the SD card an folder named "clockworkmod" and in this folder create another folder named "backup" without the "" and in the backup folder copy the content of this arhive content.
11. Reboot your phone and when is starting to boot the led wil be blue for a few second in that moment press VOL- and you will bw in the bootmenu.
Firs go in to the Boot->Set Defoult->2nd-init then go back and go to recovery -> custom recovery -> go to backup and restore select sense_legacy_0.2 full recovery
12. after the recovery is finish bull the baterry out and put in back and start in bootloader mode and install via RSD the boot sbf.
13. After that the phone pull out the batery and go to recovery menu by power and vol- and do a factory reset and reboot and voila... Defy whit Sense.
Working link to all the files http://www.multiupload.com/OYJIAHIXFZ

Wow need help from the experts

Im flashing my GF defy green lense. I myself have a htc hd2 and im no novice when it comes to flashing and modding but the defy really makes my head hurt. its out of warranty and its been running really crapp. I want to flash the: [ROM][05.02.2012]MS2Ginger - Android 2.3.6
Ive managed to root the device but i cant seem to get Clockwork mod on it to flash. Maybe because its late but ive been following the beginners guide but im stumped what to do next.
Any help from the experts would be superb
Thanks Baker0
Ive managed to root the device but i cant seem to get Clockwork mod on it to flash.
Click to expand...
Click to collapse
Do you mean you can't install clockworkmod, or that you're having trouble using it to flash the rom? To install Clockworkmod, just use this app: http://forum.xda-developers.com/showthread.php?t=1032212
Run the app and install custom recovery, then reboot the phone. The first time you reboot, the custom BootMenu will display. Use the volume buttons to navigate the menu and the power button to select an option. Select Boot > Set Default > Normal > Go Back > Reboot System. After the phone has fully booted up, power it off and reboot again. If the custom recovery installed properly, a blue LED on the phone should briefly light up each time the phone reboots (while the Motorola logo is being displayed).
To use the recovery, turn off USB debugging on the phone (Settings > Applications > Development > USB Debugging), then power off the phone. Press the power button to turn the phone on again, and as soon as the blue LED lights up, press the volume down button. The custom BootMenu will display. Select Recovery > Custom Recovery.
Thanks it makes more sense now i'll give it ago tonight. Very much appreciated
Glad I could help. Let me know if you need further assistance.
I do ive got further..ive done
Root your DEFY and Install BOOTMENU - CWM (2ndInit-Installer 2.0.apk - install 1.0.7) or use this SndInitDefy_2.0.apk
CM7/9 and MIUI user can start with step 2
2. REBOOT
3. run 2nd-init (voldown on blue LED)
4. Go to "Recovery"
5. Go to "Latest or Stable or Custom Recovery"
6. "wipe data and cache"
7. Go to "Backup and Restore"
8. Go to "Advance Restore"
9. Select "MS2Ginger3.0"
Once i select Ms2Ginger3.0 its coming up with :
Clockworkmod recovery v2.5.1.8
Checking MD5 sums...
MD5 Mismatch!
Then nothing else. Ive had a look on the forums but i cant find a solution. Ive formatted the SD card as fat32. Ive re-downloaded the file. Do I need to do something else before with my factory 2.2 defy?
Any help would be great
Cheers
Baker0
Did you unzip the "MS2Ginger3.0-RTM.zip" file? You have to unzip that file and put the "nandroid.md5" and "system.ext3.tar" files on your SD card in clockworkmod/backup/MS2Ginger. (The "MS2Ginger-Greenbread.zip" file should NOT be unzipped, however, and should be in the root of the SD card.)
If you did that correctly and you're still getting an MD5 mismatch error, try checking the MD5 sum yourself using an app like AFV (Android File Verifier), which is available free on the android market. (Open AFV and browse to the md5sum file, long-press it, and select “md5sum –c Type Check”.) Does AFV show a mismatch too?
ahh i didnt unzip. I dont do that with the hd2
Next step... Sorry I feel like a complete n00bie
All im getting now is system.img not found skipping restore of /system/.
Both files nandroid.md5" and "system.ext3.tar are in the folder....
Thank you
You need newer CWM, backup format changed recently. I'm typing from a phone, can't give you more directions now.
miscz said:
You need newer CWM, backup format changed recently. I'm typing from a phone, can't give you more directions now.
Click to expand...
Click to collapse
Yeah, that might be the problem. Download this: http://forum.xda-developers.com/attachment.php?attachmentid=787176&d=1321653982
Don't unzip it; just put it on the root of your SD card. Then boot into custom recovery, select Install zip from sdcard > choose zip from sdcard, and install it. That will update your recovery to the latest version.

[Q] [HELP] First installation JikantaruROM

Hello!
I switched to "ON S-Unlocked" with the official procedure HTCDEV.
Now I would like to install the JIKANTARU, but I do not know how.
I made ​​the partitions on the SD as indicated in the instructions, I downloaded the rom, I copied the sd and now?
Moreover, there is a patch in Italian?
Thank you!
you have to install ROM MANAGER first and install recovery.
after all backup your current rom from rom manager and then go in to recovery and install JikantaruROM.
Otherwise see this video
1. root your phone.
2. install rom manager
3. install CWM from rom manager while you backup your current rom it will ask for install it.
4. Put custom rom .zip file on your sd card.
5. Turn off your phone. Now, this is the important part.
Press the Power + Volume Down button simultaneously. (if you can't get it working, disable fastboot under settings)
You'll see the white bootloader screen and something will happen for about 5 seconds (don't worry, you haven't bricked your phone ). It's just a normal P76img.zip search. After that is done, select the "Recovery" option using the volume down button and then pressing the power button.
6. Wipe stuff
Congratulations, if you made it this far in one go
Easy stuff now.
Toggle using volume buttons and 'factory reset'.
Then 'wipe cache'.
Then go into advanced and 'wipe dalvik cache' and 'battery stats'.
7. Now select 'install zip from SD card'.
Then select 'choose zip'.
Then select the your zip file that you had placed on the root of your SD
Select 'YES' obviously
Let it do it's thing for about 4-5 minutes.
Once it is done okay.
Then, go back. Reboot. Have a heart in mouth moment and then watch the logo show up in a few minutes. You've done it successfully. Congratulations.
OR Read this thread below..
http://forum.xda-developers.com/showthread.php?t=1538035
enjoy... hope u understand and it helps u...
jimmysmart83 said:
you have to install ROM MANAGER first and install recovery.
after all backup your current rom from rom manager and then go in to recovery and install JikantaruROM.
Otherwise see this video
1. root your phone.
2. install rom manager
3. install CWM from rom manager while you backup your current rom it will ask for install it.
4. Put custom rom .zip file on your sd card.
5. Turn off your phone. Now, this is the important part.
Press the Power + Volume Down button simultaneously. (if you can't get it working, disable fastboot under settings)
You'll see the white bootloader screen and something will happen for about 5 seconds (don't worry, you haven't bricked your phone ). It's just a normal P76img.zip search. After that is done, select the "Recovery" option using the volume down button and then pressing the power button.
6. Wipe stuff
Congratulations, if you made it this far in one go
Easy stuff now.
Toggle using volume buttons and 'factory reset'.
Then 'wipe cache'.
Then go into advanced and 'wipe dalvik cache' and 'battery stats'.
7. Now select 'install zip from SD card'.
Then select 'choose zip'.
Then select the your zip file that you had placed on the root of your SD
Select 'YES' obviously
Let it do it's thing for about 4-5 minutes.
Once it is done okay.
Then, go back. Reboot. Have a heart in mouth moment and then watch the logo show up in a few minutes. You've done it successfully. Congratulations.
OR Read this thread below..
http://forum.xda-developers.com/showthread.php?t=1538035
enjoy... hope u understand and it helps u...
Click to expand...
Click to collapse
HI! MAny thanx for your answer! Ther's a problem: when i put PG76IMG file into sd, it says me CID INCORRECT!
Ok!!! I've put the root.zip file into sd and now it works!
I've just installed rom manager and put jikantaru rom into sd...now i procede.
THANX A LOT!
Italian language for jikantarurom?
Hi, Jikantaru works great!
Last question: doesn't exsist an italian patch?

Categories

Resources