[Q] USB Mode... HELP!!!!! - Wildfire Q&A, Help & Troubleshooting

hi guys I WAS wondering if anyone knew how to fix my problem...
every time i plug my phone into my computer it just charges and usb debugging is on it does not even allow me to choose disk drive.etc
someone pls help
running cm7

CJKaufman said:
hi guys I WAS wondering if anyone knew how to fix my problem...
every time i plug my phone into my computer it just charges and usb debugging is on it does not even allow me to choose disk drive.etc
someone pls help
running cm7
Click to expand...
Click to collapse
lfom said:
I have just found this:
Code:
# set default usb mode as usb mass storage
ro.default_usb_mode=2
It goes in build.prop. Valid values are 0-4. As it's "ro" (read only), probably you will have to reboot after changing the value in build.prop to test. If you do, please report the results. Thanks.
Click to expand...
Click to collapse
have you pulled the notification bar down and pressed the icon in your notification bar, a green adroid dude. Then press the "turn on USB storge" button underneath the green adroid guy. Then there will be another prompt to let you know that your SD card will not be availble to you phone while in this mode. This will put in the storage mode(SD card to Computer)

Nothing pops up only the charging light

Try a different cable

I have tried about ten different ones

Besides what user arkoze said,
Have you tried to disable/enable USB debugging mode in settings?

Related

Win doesn't recognize my Defy

Hello,
I've a big issue, if I try to connect the phone, via usb, to the pc windows none of the devices recognize the connection.
Nothing appear on the Defy. On the Pc, sometimes appear the "new device windows" but if I try to install drivers it show me an alert saying that the device is not installed correctly.
I've tried all the motorola drivers available but nothing happen. I've also tried 2 other pc and 2 other usb cable
Fortunally, the device is rooted and I can install a nandroid backup but I don't know how I can resolve this issue, someone can help me?
Thanks
nickee said:
Hello,
I've a big issue, if I try to connect the phone, via usb, to the pc windows none of the devices recognize the connection.
Nothing appear on the Defy. On the Pc, sometimes appear the "new device windows" but if I try to install drivers it show me an alert saying that the device is not installed correctly.
I've tried all the motorola drivers available but nothing happen. I've also tried 2 other pc and 2 other usb cable
Fortunally, the device is rooted and I can install a nandroid backup but I don't know how I can resolve this issue, someone can help me?
Thanks
Click to expand...
Click to collapse
Enable / disable USB debugging maybe? But normally there should be a prompt on the phone when you plug it in (pulling down the status bar usually asks you what to do, give memory card access, charge only...). Btw, does the Defy charge when plugged in or does the LED light up?
Arjoma said:
Enable / disable USB debugging maybe? But normally there should be a prompt on the phone when you plug it in (pulling down the status bar usually asks you what to do, give memory card access, charge only...). Btw, does the Defy charge when plugged in or does the LED light up?
Click to expand...
Click to collapse
Tried but nothing change. The phone doesn't charge correctly and no prompt message if I connect it to the pc.
And it is definitely not the cable and / or the USB port? Then it has to be a hardware problem on the phone's side I think.
Arjoma said:
And it is definitely not the cable and / or the USB port? Then it has to be a hardware problem on the phone's side I think.
Click to expand...
Click to collapse
Not the cable and not the USB
There's a way to reinstall all the Defy driver without the cable?
Try installing new moto drivers.
http://forum.xda-developers.com/showthread.php?t=1100585&highlight=rsd
Installed but no improvement on the situation. I think that's an hardware problem...
nickee said:
Installed but no improvement on the situation. I think that's an hardware problem...
Click to expand...
Click to collapse
Almost seems so : But charging works?
Arjoma said:
Almost seems so : But charging works?
Click to expand...
Click to collapse
Charging didn't work if I connect the phone to the pc, it's strange because if I connect to the electrical power it works.
I also think that I've had an issue when I've installed the custom firmware

Can't Get in USB Mode

Everytime i connect my phone to my computer through a usb both third party and OEM usb cable the phone notification doesn't show anything or any indication that i can select to enter into storage mode.
any idea what might be wrong because i dont storage mode alot so i dont know if anything can be wrong with the usb port.
any help would be appreciated
thank you
Jimmy
jimprime said:
Everytime i connect my phone to my computer through a usb both third party and OEM usb cable the phone notification doesn't show anything or any indication that i can select to enter into storage mode.
any idea what might be wrong because i dont storage mode alot so i dont know if anything can be wrong with the usb port.
any help would be appreciated
thank you
Jimmy
Click to expand...
Click to collapse
What ROM you running, that might help ..... maybe turn off ADB , in settings, and check usb storage there ...
no ROM, everything is stock and debugging mode is unchecked as well
when i mannually try to use the USB mass storage from Setting>Wireless>USB utillties and click on Connect Storage to PC it gives me a window saying "ATTENTION: Usb is connected. Remove the cable" when i remove the cable then it tell me to Connect the USB cable
Same thing happens to me.
My solution is to plug my/your phone to the computer and open the notifications. Click/press on the usb is connected notification and you can enter storage mode directly without hassle.
Sent from my SGH-T989D using Tapatalk
jimprime said:
no ROM, everything is stock and debugging mode is unchecked as well
when i mannually try to use the USB mass storage from Setting>Wireless>USB utillties and click on Connect Storage to PC it gives me a window saying "ATTENTION: Usb is connected. Remove the cable" when i remove the cable then it tell me to Connect the USB cable
Click to expand...
Click to collapse
When I had this problem, I just needed to fix permissions in recovery. Is the phone rooted? Did you recently buy it new or used?
Solution is simple I suppose.
Disconnect the cable.
Go to settings from where USB connection can be enabled.
Click that option and it will ask you to connect the cable.
Only then connect it. That should be work.
Sent from my GT-I9100 using Tapatalk 2 Beta-5
jimprime said:
Everytime i connect my phone to my computer through a usb both third party and OEM usb cable the phone notification doesn't show anything or any indication that i can select to enter into storage mode.
any idea what might be wrong because i dont storage mode alot so i dont know if anything can be wrong with the usb port.
any help would be appreciated
thank you
Jimmy
Click to expand...
Click to collapse
does ur pc detect any device?
Well I tried all that,... But after around 15 reboots it suddenly started working so I wonder what happened there
Sent from my SGH-T989 using XDA

missing usb connect modes...

i feel like i'm missing something obvious here, but i don't see pc software or charge only in usb connect menu anymore, also the menu doesn't come up when i plug in usb, i just get a prompt if i want to mound sd card or not, it used to have a menu with 5 options now it has 3 and i have to go into settings > storage > menu button > usb connection mode just to see the menu.
thanks in advance for any help on this.
KronicSkillz said:
i feel like i'm missing something obvious here, but i don't see pc software or charge only in usb connect menu anymore, also the menu doesn't come up when i plug in usb, i just get a prompt if i want to mound sd card or not, it used to have a menu with 5 options now it has 3 and i have to go into settings > storage > menu button > usb connection mode just to see the menu.
thanks in advance for any help on this.
Click to expand...
Click to collapse
K so i've been reading more on this and i see that google took charge only mode out of android.... is this correct? if so did they also take pc software mode out to prevent connection from pc running terminal?
is there any other way to use adb shell from terminal on my pc using usb connection than pc software mode?
KronicSkillz said:
is there any other way to use adb shell from terminal on my pc using usb connection than pc software mode?
Click to expand...
Click to collapse
I have no problem using adb with whatever default setting the usb connection is set to in CM10. Just make sure you have Developer Options turned on and Android debugging enabled.
k good to know thanks
verified that on this rom V6, all usb modes are showing up and the menu is popup when i plug in usb, ahhhh, back to normal
http://forum.xda-developers.com/showthread.php?t=1980541
best Rom for p930 right now IMO.
KronicSkillz said:
verified that on this rom V6, all usb modes are showing up and the menu is popup when i plug in usb, ahhhh, back to normal
http://forum.xda-developers.com/showthread.php?t=1980541
best Rom for p930 right now IMO.
Click to expand...
Click to collapse
Sorry to bring back this thread but I wasn't sure if you figured it out or not?
Anyways, try this:
In CM10.1, I select Mass Storage. Afterward, a screen pops up saying "Press to toggle Mass Storage". When it's not toggled on, that is PC Mode. When toggled on, it's Mass Storage
i figured out that its cyanogenmod that has missing modes when i changed back to a stock based ics they all came back. i have 6 or 7 modes in stock ics and i only had 3 in cm10
KronicSkillz said:
i figured out that its cyanogenmod that has missing modes when i changed back to a stock based ics they all came back. i have 6 or 7 modes in stock ics and i only had 3 in cm10
Click to expand...
Click to collapse
Yeah that's what I'm saying. I don't think they actually are missing. I believe they've combined the settings so it's easier to switch between pc and mass storage (one button toggle between the two).
yes i know they are combined i dont like it.
KronicSkillz said:
yes i know they are combined i dont like it.
Click to expand...
Click to collapse
Oh sorry, I misunderstood you.

[Q] galaxy nexus troubleshooting help please

hi, i got this sgn from a friend with a broken screen, and ive now replaced the screen and the phone turns on and boots up no problem. but when i plug it in to my puter, it says usb device not recognized, one ot the usb devices attached.... as well in settings the wifi on/off toggle starts greyed out, if i go into the wifi setup, i can push the toggle and it says turning on wifi, but then after about 20 seconds or so, it just flicks the toggle back to off. bluetooth if i press the toggle, it instantly flicks back to off, and wont turn/stay on. and the last thing i have noticed that is not right, is when i try to go into the camera, it just f/c's and says gallery has has stopped, yet if i go into the gallery, it comes up. but f/c's if i try to access the camera.. i am thinking its probably a hardware issue, just was wondering if anyone might be able to give me any extra insight or suggestions, thanks in advance.
edit: oh, and the phone charges through the usb port, which i find weird that the puter wont recognize it...
slickwidnick said:
hi, i got this sgn from a friend with a broken screen, and ive now replaced the screen and the phone turns on and boots up no problem. but when i plug it in to my puter, it says usb device not recognized, one ot the usb devices attached.... as well in settings the wifi on/off toggle starts greyed out, if i go into the wifi setup, i can push the toggle and it says turning on wifi, but then after about 20 seconds or so, it just flicks the toggle back to off. bluetooth if i press the toggle, it instantly flicks back to off, and wont turn/stay on. and the last thing i have noticed that is not right, is when i try to go into the camera, it just f/c's and says gallery has has stopped, yet if i go into the gallery, it comes up. but f/c's if i try to access the camera.. i am thinking its probably a hardware issue, just was wondering if anyone might be able to give me any extra insight or suggestions, thanks in advance.
edit: oh, and the phone charges through the usb port, which i find weird that the puter wont recognize it...
Click to expand...
Click to collapse
hey,
if you don't mind rooting and phone is not underwarranyty, try: wugfresh nexus toolkit
or cyanogemod.org
may help fix...... and both are automated very easy.
gnexususer said:
hey,
if you don't mind rooting and phone is not underwarranyty, try: wugfresh nexus toolkit
or cyanogemod.org
may help fix...... and both are automated very easy.
Click to expand...
Click to collapse
Yeah, see the problem is my computer won't recognize the phone to be able to perform any of the functions of the toolkit... So I don't know what options (if any) I have...
slickwidnick said:
Yeah, see the problem is my computer won't recognize the phone to be able to perform any of the functions of the toolkit... So I don't know what options (if any) I have...
Click to expand...
Click to collapse
try reboot to odin bootloader. long press volume down + power button. can u boot it up?
memaro_maro said:
try reboot to odin bootloader. long press volume down + power button. can u boot it up?
Click to expand...
Click to collapse
yeah, ive got a usb jig to boot it into odin download mode, but i think i tried it but the computer still didnt recognize it, ill try it again and let you nkow what happens.. also, i have another working sgn here, and i switched out the boards, cause the usb port is not on the mainboard, it is connected by a flex ribbon (thinking it may be a faulty usb port) but either one generates the same results..
You dont need Odin. Just use fastboot and flash the latest Factory image. There are plenty of guides on how to do that. Good luck! If you cant get it to work just let me know.
Sent from my Galaxy Nexus using XDA Premium HD app
slickwidnick said:
yeah, ive got a usb jig to boot it into odin download mode, but i think i tried it but the computer still didnt recognize it, ill try it again and let you nkow what happens.. also, i have another working sgn here, and i switched out the boards, cause the usb port is not on the mainboard, it is connected by a flex ribbon (thinking it may be a faulty usb port) but either one generates the same results..
Click to expand...
Click to collapse
correctly install/setup adb & fastboot first & try ~
http://forum.xda-developers.com/showthread.php?t=2588979
if still not recognize ur device use odin tool, from odin bootloader
odin ~
http://forum.xda-developers.com/galaxy-nexus/general/guide-restore-to-stock-unbrick-galaxy-t2065470
memaro_maro said:
correctly install/setup adb & fastboot first & try ~
http://forum.xda-developers.com/showthread.php?t=2588979
if still not recognize ur device use odin tool, from odin bootloader
odin ~
http://forum.xda-developers.com/galaxy-nexus/general/guide-restore-to-stock-unbrick-galaxy-t2065470
Click to expand...
Click to collapse
okay i tried your advice, but the computer still fails to recognize the phone, i installed the drivers, cause the computer picks up the other sgn that i have here, i just unplugged the one thats fine, and plugged in the one i am trying to fix ant it doesnt do anything,...
Go to System Settings -> Storage -> 3 dots -> USB connection, and set MTP ON (V)
and if that doesn't work, try another DATA cable
.
Ed V said:
Go to System Settings -> Storage -> 3 dots -> USB connection, and set MTP ON (V)
and if that doesn't work, try another DATA cable
.
Click to expand...
Click to collapse
tried setting mtp on, tried setting ptp on, tried setting debugging mode off and on, tried a different cable, still nothing..
something i did notice was that i have another sgn here and i went to the storage settings, and i was able to uncheck both mtp and ptp and my computer installed a new device "samsung something something" cant remember what the new device was tho..
oh and the bootloader is locked on the sgn im trying to fix and it is unlocked on the second sgn i have here...
could that have something to do with any of this?

Windows 8.1 64 bit charging but not recognized

please how do I fix this problem?
I tried formatting pc and formatting the m8 but still charging and not recognized.
I have 3 original usb cables but still all charging and not recognized
I installed drivers etc still nothing..
can any1 give me latest driver or something?
htc sync manager also doesn't work...
Try diffrent pc and see if it worsks there.
PuG3o6 said:
please how do I fix this problem?
I tried formatting pc and formatting the m8 but still charging and not recognized.
I have 3 original usb cables but still all charging and not recognized
I installed drivers etc still nothing..
can any1 give me latest driver or something?
htc sync manager also doesn't work...
Click to expand...
Click to collapse
Have you enabled developer options on the phone? If not enable them, go to settings - about- tap build number until it says you are now a developer. Go back one screen and open the developer options. About half way down you will see an option that says usb debugging. Make sure that is checked. Unplug and replug your phone. A box should pop up asking you to allow rsa fingerprint click the checkbox and hit accept. Now your phone should be seen by windows.

Categories

Resources