4.67 kernel on 4.54 version - EVO 4G Q&A, Help & Troubleshooting

Hello all,
First time posting here.
I recently rooted and flashed MikG 3 rom and chopsuey kernel.
All is working well...however, I would like to have the new kernel for version 4.67 on sd card as a backup. I have version 4.54...will this kernel work for my version if I decide to go back?

Related

EB13/EC05 and Midnight v5 ROM

Hi all quick question,
I am pretty new to this and by reading I have managed to sucessfully root and change Roms. This has been alot of fun and I am trying to understand the following changes to my phone after updating to the new Midnight v5 BYOR.
I had rooted with odin this
Stock EB13 Deodexed EXT4 + CW 3.0.0.6
I was running Nidnight 4.2 Standard
I flashed the new midNIGHT ROM v5 (BYOR Edition) EC05 NCIQ
everything seems to be working fine but when checking about phone it says the following;
2.2.1 Firmware
EB13 Baseband
2.6.32.9 Kernel version
Midnight v5BYOR
shouldnt I be on EC05 ?
and is this the correct kernel? (the v4.2 said Bonsai)
Thanks alot
bryanberlin said:
Hi all quick question,
I am pretty new to this and by reading I have managed to sucessfully root and change Roms. This has been alot of fun and I am trying to understand the following changes to my phone after updating to the new Midnight v5 BYOR.
I had rooted with odin this
Stock EB13 Deodexed EXT4 + CW 3.0.0.6
I was running Nidnight 4.2 Standard
I flashed the new midNIGHT ROM v5 (BYOR Edition) EC05 NCIQ
everything seems to be working fine but when checking about phone it says the following;
2.2.1 Firmware
EB13 Baseband
2.6.32.9 Kernel version
Midnight v5BYOR
shouldnt I be on EC05 ?
and is this the correct kernel? (the v4.2 said Bonsai)
Thanks alot
Click to expand...
Click to collapse
You need to Odin the EC05 modem found here:
http://www.multiupload.com/LNZXJFTCS0
bryanberlin said:
Hi all quick question,
I am pretty new to this and by reading I have managed to sucessfully root and change Roms. This has been alot of fun and I am trying to understand the following changes to my phone after updating to the new Midnight v5 BYOR.
I had rooted with odin this
Stock EB13 Deodexed EXT4 + CW 3.0.0.6
I was running Nidnight 4.2 Standard
I flashed the new midNIGHT ROM v5 (BYOR Edition) EC05 NCIQ
everything seems to be working fine but when checking about phone it says the following;
2.2.1 Firmware
EB13 Baseband
2.6.32.9 Kernel version
Midnight v5BYOR
shouldnt I be on EC05 ?
and is this the correct kernel? (the v4.2 said Bonsai)
Thanks alot
Click to expand...
Click to collapse
EC05 Modem Package (Odin)
—Until the OTA hits the EC05 modem MUST BE ODIN’D.
—However, EC05 runs just fine on the EB13 modem as well
—EB13 ROMS run fine with the EC05 modem also.

[Q] Help getting back to stock or decent rom

Hi Guys
I rooted my HD last night with latest cyanogen with everything working fine.
So I then tried to overclock and flashed a kernal to do it
2.6.32.21-ck2-hrkfdn-cyanogenmod-gf01fa7d-dirty
since then the phone has been running like a dog. if i run a benchmark i get device does not support stencil buffers and I cant play games at all.
Is there a better kernal to use or can anyone explain how to get back to the stock kernal ?
Cheers
Flash your cyanogenmod rom again, then you have your old kernel back.
MicBoef said:
Flash your cyanogenmod rom again, then you have your old kernel back.
Click to expand...
Click to collapse
thanks mate ive flashed a new kernal onto it
2.6.35.14 leo droid
now i cant get bluetooth working and i need it for the car
any ideas ?
Try this kernel http://forum.xda-developers.com/showthread.php?t=1085725, i think it's the best aosp kernel here on xda!
Back to stock
Hi guys,
I've unrooted my DHD the other day from LeeDroid 3.3.3, now back to stock (I believe?) 1.32.405.6, Android version 2.2.
When I check online for OTA updates the phone says there are no updates, but I know there is a 2.3 GB version with a 3.0 Sense available.
Any ideea how to get the latest OTA, please?
The only thing I can guess at is that something is not quite 'stock'. Did you restore your old radio and original hboot backup that was made when you originally rooted it? You might've already used this but Yoshi_523 wrote an awesome guide that I used when I needed phone fixed under warranty:
http://forum.xda-developers.com/showthread.php?t=920876
remuspider said:
Hi guys,
I've unrooted my DHD the other day from LeeDroid 3.3.3, now back to stock (I believe?) 1.32.405.6, Android version 2.2.
When I check online for OTA updates the phone says there are no updates, but I know there is a 2.3 GB version with a 3.0 Sense available.
Any ideea how to get the latest OTA, please?
Click to expand...
Click to collapse
U need S-on to receive the official update

[Q] Going back to Sense 3.0 from Cyanogen?

Hey
I used the Ace Hack Kit to root my Desire HD, then out of curiosity installed the CyanogenMod, and I wonder if I can go back to HTC Sense 3.0 now?
If it is possible, will I still have root?
Thanks
Android version
2.3.7
Baseband version
12.56.60.25U_26.10.04.03_M
Kernel version
2.6.35.14-cyanogenmod-g9e5cdf1
[email protected] #1
Mod version
CyanogenMod-7.1.0-DesireHD
Build number
GWK74
I am assuming you have successfully installed CM and therefore have root.
If you have been able to install CM successfully, you can install any other ROM with the same process. There are many ROMS in the development forum.
Pick you fav ROM
Download it
Check the MD5 (an important but not a compulsory check)
Put the file on SD card
Boot into recovery
Choose Install from SD Card
Navigate to the location of ROM
Select to install it
If you want to go back to Sense 3.0, I recommend you try out Android Revolution (ARHD) roms, you can try out Runny based roms if you want Sense 3.5 and if you are ok without video recording and WLAN support, you can even try out LC's ICS rom if you want Andorid 4.
Thanks so much for the reply, I was wondering if I could go back to the stock HTC sense 3.0 rom because that's actually the only I like the most.
Is it possible to have root with a stock rom?
You will find the stock ROM right here http://forum.xda-developers.com/showthread.php?t=1382235
it's already rooted. so u dont need to root your device again
flash it just like u did with CM
Thanks so much for that link!
One last question please, After I flash the stock rom, can I still get software updates from HTC?
No, u won't get any HTC Updates. I don't think this is what you want because u would have to flash a RUU and loose root permissions.

[Q] E4GT Flashing question

Hey this may sound like a silly question but seeing as i am a new comer to the world of the Epic 4g Touch (previously live in the world of the OG Evo) some of this is a little new to me.
current set up is as follows
baseband version s:d710.10 s.el29
kernal version: 2.6.35.14-rogue_et-1
4.1+
build number : calculins.e4gt.rom.v3.0
i was looking at installing the super galaxy rom but wanted to know if it is safe to flash a rom that is based off of ff11 when im currently on el29.
again only reason i ask is because i could not find mention of this in the op for that rom.
that and i never really had to worry about sow many different builds when i was on my OG Evo. any help would be greatly appreciated.
Mastergrimm28 said:
Hey this may sound like a silly question but seeing as i am a new comer to the world of the Epic 4g Touch (previously live in the world of the OG Evo) some of this is a little new to me.
current set up is as follows
baseband version s:d710.10 s.el29
kernal version: 2.6.35.14-rogue_et-1
4.1+
build number : calculins.e4gt.rom.v3.0
i was looking at installing the super galaxy rom but wanted to know if it is safe to flash a rom that is based off of ff11 when im currently on el29.
again only reason i ask is because i could not find mention of this in the op for that rom.
that and i never really had to worry about sow many different builds when i was on my OG Evo. any help would be greatly appreciated.
Click to expand...
Click to collapse
You have to flash the el26 kernel then copy the rom to your internal or external sd then you are all set just flash the rom in cwm.
Zero Night said:
You have to flash the el26 kernel then copy the rom to your internal or external sd then you are all set just flash the rom in cwm.
Click to expand...
Click to collapse
ah, thank you for the fast reply man.
and the kernal can also be flashed in cwm just like i used to do on the OG Evo? or would it have to be done through ODIN?
Yes it is safe. Youre baseband aka modem can be different from your kernal or rom base (super galaxy rom is based on FF11 stock rom). Just be extra careful flashing ICS roms so read up before doing anything.
And you don't need to go back to EL26 before you flash. Just use a custom recovery and flash Calk's Format All instead of wiping using the recovery. You don't need to do the extra work of going back to el26.

what rom/kernal am i using?

Hi guys, I got my glide sent over from the u.s (I'm in the u.k) a few months ago, it was already rooted for me, and as such, I'm wondering what rom and kernal I'm using?
The details I can retreive are:
Android ver 4.0.4
Baseband : I927RUXKJ5
Kernal : 3.1.10-I927UCLG9-CL970642
Build. : IMM67D
Does this give anyone any clues?
Is this the stock ota ics update from at&t?
The phone is a rojers one.
Stock kernal?
Just wondering as was thinking about flashing the litekernal, and not sure if it would work ok with the rom I am using, as this rom is very stable..
Btw cwm is installed etc..
Thanks..
James.
jmpcrx said:
Hi guys, I got my glide sent over from the u.s (I'm in the u.k) a few months ago, it was already rooted for me, and as such, I'm wondering what rom and kernal I'm using?
The details I can retreive are:
Android ver 4.0.4
Baseband : I927RUXKJ5
Kernal : 3.1.10-I927UCLG9-CL970642
Build. : IMM67D
Does this give anyone any clues?
Is this the stock ota ics update from at&t?
The phone is a rojers one.
Stock kernal?
Just wondering as was thinking about flashing the litekernal, and not sure if it would work ok with the rom I am using, as this rom is very stable..
Btw cwm is installed etc..
Thanks..
James.
Click to expand...
Click to collapse
Correct, that's the UCLG9 Samsung stock rom with stock kernel and you should have no problems installing the ICS version of litekernel.
kick buttowski said:
Correct, that's the UCLG9 Samsung stock rom with stock kernel and you should have no problems installing the ICS version of litekernel.
Click to expand...
Click to collapse
Cheers kick butt

Categories

Resources