www.nena.se/nenamark/view?version=2&device_id=593
See how you compare against these scores! If you get #1, make sure to post all your info! And, by all means, feel free to brag!
OG Epic scores below to see how superior your phone is to the last GS series.
www.nena.se/nenamark/view?version=2&device_id=153
I don't understand the scoring on the website. My score is on the top
54.3fps
Sent from my Epic™ 4G Touch
globalninja said:
I don't understand the scoring on the website. My score is on the top
54.3fps
Sent from my Epic™ 4G Touch
Click to expand...
Click to collapse
YOU WIN !!!!!!!
inb4
Sorry couldn't help it
HaiKaiDo said:
inb4
Sorry couldn't help it
Click to expand...
Click to collapse
Hey look its this picture again
Sent from my Epic™ 4G Touch
HaiKaiDo said:
inb4
Sorry couldn't help it
Click to expand...
Click to collapse
Lol.
This is purely for passing the time. No need to take anything seriously.
Carry on folks!
Sent from something with a Kモ尺れモㄥ.
Either way this is cool, you can post whatever you want if you get top 10.
Sent from a phone with kNOw CIQ
Cleared cache and dalvik, running calkin 2.8.1 and newest rogue at 1.7ghz
natelw said:
Cleared cache and dalvik, running calkin 2.8.1 and newest rogue at 1.7ghz
Click to expand...
Click to collapse
1.7???? How? My phone always locks up at 1.7
sent from the near past
Danial723 said:
1.7???? How? My phone always locks up at 1.7
sent from the near past
Click to expand...
Click to collapse
So does mine. He may just be one of the lucky ones.
Sent from my SPH-D710 using XDA App
1.7 seems right on the edge... mine will run there for a little while; sometimes even long enough to get through the benchmark but it's never long before it hangs and/or reboots itself.
(Running calk 2.8.1, 75mv UV, w/ gunslinger kernel and overstew ICS btw; been considering trying OC w/ less uv to see if its more stable but since I'm usually uc'd for daily use haven't bothered yet.)
jt_hatch said:
1.7 seems right on the edge... mine will run there for a little while; sometimes even long enough to get through the benchmark but it's never long before it hangs and/or reboots itself.
(Running calk 2.8.1, 75mv UV, w/ gunslinger kernel and overstew ICS btw; been considering trying OC w/ less uv to see if its more stable but since I'm usually uc'd for daily use haven't bothered yet.)
Click to expand...
Click to collapse
I've tried raising voltage and lowering.....freeze every time....sometimes I can get through a benchmark but not usually
sent from the near past
58.7 seems to be my mark
Sent from my SPH-D710 using XDA App
Oops. Fixed the link in the OP.
Sent from something with a Kモ尺れモㄥ.
Danial723 said:
I've tried raising voltage and lowering.....freeze every time....sometimes I can get through a benchmark but not usually
sent from the near past
Click to expand...
Click to collapse
I have the voltage set at 1475mV for 1704mHz on setcpu and put min and max at 1704 performance. I can run it all day no freezing but I usually run it at 200/800
See a lot of users with blazer rom, must be pretty quick?
Sent from a phone with kNOw CIQ
Eh...still rebooted at 1.7....its all good till I run quadrant it seems, anything graphic intensive
sent from the near past
I think that is pretty standard... I can run at 1704 and get through about half of my benchmarks
Related
I am running Genocide 0.3 with setCPU set to 1.2 Ghz and performance. I am getting scores lower than a 1.0 Ghz stock Epic with 2.2. I am getting 1113 and 2435 at 1.2 Ghz. That is definitely an improvement over stock EB13 where I was gettin 300-400 less on each. What could be slowing my Epic down?
Thanks.
kennyglass123 said:
I am running Genocide 0.3 with setCPU set to 1.2 Ghz and performance. I am getting scores lower than a 1.0 Ghz stock Epic with 2.2. I am getting 1113 and 2435 at 1.2 Ghz. That is definitely an improvement over stock EB13 where I was gettin 300-400 less on each. What could be slowing my Epic down?
Thanks.
Click to expand...
Click to collapse
Those scores aren't really all that bad. Not great, but not bad!
If it helps any (and might make you feel better ) run Smartbench again and note the scores of the next 2 or 3 phones below your score. Run Smartbench again and see what the scores are listed at for those same phones again and you will see that they have changed.
I'm sure that Smartbench is one of the best benchmark programs out because of they way it tests, but the "comparison" output it gives leaves a lot to be desired.
In any case, scores also vary based on what things are running in the background when the test is performed. (IE: As soon as the phone is booted up, immediately after killing apps/tasks, etc.)
Edit: The way a Rom is optmized has a lot to do with it as well. What Rom are you running with the Genocide kernel?
cjobanion said:
Those scores aren't really all that bad. Not great, but not bad!
If it helps any (and might make you feel better ) run Smartbench again and note the scores of the next 2 or 3 phones below your score. Run Smartbench again and see what the scores are listed at for those same phones again and you will see that they have changed.
I'm sure that Smartbench is one of the best benchmark programs out because of they way it tests, but the "comparison" output it gives leaves a lot to be desired.
In any case, scores also vary based on what things are running in the background when the test is performed. (IE: As soon as the phone is booted up, immediately after killing apps/tasks, etc.)
Edit: The way a Rom is optmized has a lot to do with it as well. What Rom are you running with the Genocide kernel?
Click to expand...
Click to collapse
Dameon's stock odexed eb13.
kennyglass123 said:
I am running Genocide 0.3 with setCPU set to 1.2 Ghz and performance. I am getting scores lower than a 1.0 Ghz stock Epic with 2.2. I am getting 1113 and 2435 at 1.2 Ghz. That is definitely an improvement over stock EB13 where I was gettin 300-400 less on each. What could be slowing my Epic down?
Thanks.
Click to expand...
Click to collapse
Ext4?
Sent from my SPH-D700 using XDA App
The answer to your speed desires is in my signature.
tpike said:
Ext4?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
No, stuck with RFS for now.
i use quadrant, its seems smartbench hates our phones..... i get crappy scores with smartbench, but with quadrant my phone roxxxxxxxx
k0nane said:
The answer to your speed desires is in my signature.
Click to expand...
Click to collapse
Hehe...you are tempting me. K0nane, answer my new question about flashing and I'm heading your way
Sent from my SPH-D700 using XDA App
kennyglass123 said:
No, stuck with RFS for now.
Click to expand...
Click to collapse
Ext 4 made a big difference for me. why not change?
Sent from my SPH-D700 using XDA App
kennyglass123 said:
I am running Genocide 0.3 with setCPU set to 1.2 Ghz and performance. I am getting scores lower than a 1.0 Ghz stock Epic with 2.2. I am getting 1113 and 2435 at 1.2 Ghz. That is definitely an improvement over stock EB13 where I was gettin 300-400 less on each. What could be slowing my Epic down?
Thanks.
Click to expand...
Click to collapse
1390, 2930 for me on trinity 0.4 oc 1.2ghz conservative.
Sent from my SPH-D700 using XDA App
tpike said:
Ext 4 made a big difference for me. why not change?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
It made a big difference on Smartbench? Want to switch but keep my stock apps and TouchWiz. I had some FCs last time I tried to just convert so want to make sure to pick a ROM with as little bugs as possible.
k0nane said:
The answer to your speed desires is in my signature.
Click to expand...
Click to collapse
+1 I almost went back to the evo before I tried this rom.
Sent from my SPH-D700 using Tapatalk
Well I jumped in to EXT 4 and Bonsai and bricked my phone, which only confirms my phone was flaky from the start. So I Odin'd the EB13 Deodexed with EXT4 and then Bonsai on top of that, restored with Titanium and VOILA, superfast! I finally beat the stock Epic and just about tie with that LG on top! Thank you all for the advice.
trying to run quadrant, phone hangs up on cpu step 10/12 every time. I know it's doing video decoding, but I feel like it shouldn't sit there for 5+ minutes...
running syndicate rom on eb13 ext4
Which SmartBench are you running? 2010 or 2011? If you're running 2011, the scores are going to be lower because he changed the baseline.
My scores on 1.2Ghz, Syndicate ROM are 949 and 2264 but significantly lower than the 2010 version which was (going from memory) around 1300 and 2900.
The way I use these benches are firstly against my own phone. The first numbers are my base and then I only compare against myself.
Secondly, you'll have to go to the website to filter the score results, but you'll compare your phone ONLY with those of the same phone.
Thirdly, once it's been established that all units are being run against the same tool, you can compare your marks against others.
Not saying my way's the only way of looking at things or that it's better; just that I do it this way.
Anybody with questions about the speed of Calk's Rom, here it is. Not sure how this compares with other, more modern phones. Quadrant seems a bit out dated at the moment. This is at forced 1.6 ghz with the LoST kernel Exp build. I don't particularly trust the kernel that gets up to 1.8 ghz..
Ryan23474 said:
Anybody with questions about the speed of Calk's Rom, here it is. Not sure how this compares with other, more modern phones. Quadrant seems a bit out dated at the moment. This is at forced 1.6 ghz with the LoST kernel Exp build. I don't particularly trust the kernel that gets up to 1.8 ghz..
Click to expand...
Click to collapse
Sent from my SPH-D710 using xda premium
Try it with Renegade kernel.
It is extremely fast!
I'm loving it but I'm just wondering how to add TSMParts (such as multiple lockscreens like Starburst has or extended toggles). With those tweaks, this would be nearly perfect.
Fus3D said:
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
New 1.5 ROM, LOL.
5400+
Sent from my SPH-D710 using xda premium
My high is 5200 on stock......
Sent from my Samsung Galaxy S2
is this done on wifi or reg 3g? sorry for the noobish question
m_reyna_16 said:
is this done on wifi or reg 3g? sorry for the noobish question
Click to expand...
Click to collapse
3g and wifi are internet speeds. Benchmarks are your cpu speeds. Neither wifi or 3g will affect the benchmarks.
Sent from my SPH-D710 using Tapatalk
You realize that none of these "fast" roms are actually faster than stock?
All of them use various tricks to improve the sd card score without affecting the cpu/gpu scores. Quadrant is a flawed benchmark susceptible to cheating that way.
None of those "high" scores truly translate to real world performance improvements.
nabbed said:
You realize that none of these "fast" roms are actually faster than stock?
All of them use various tricks to improve the sd card score without affecting the cpu/gpu scores. Quadrant is a flawed benchmark susceptible to cheating that way.
None of those "high" scores truly translate to real world performance improvements.
Click to expand...
Click to collapse
Exactly... But what kernel is the op talkig about that goes up to 1.8 ghz? Ive never seen that one :/
Sent from my SPH-D710 using xda premium
iSaint said:
Exactly... But what kernel is the op talkig about that goes up to 1.8 ghz? Ive never seen that one :/
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Who gives a damn?
Kernels don't "go to" megahertz. Your hardware can either handle it or it can't.
Get any kernel which allows cpu voltage tinkering, and figure out your best speed.
nabbed said:
Who gives a damn?
Kernels don't "go to" megahertz. Your hardware can either handle it or it can't.
Get any kernel which allows cpu voltage tinkering, and figure out your best speed.
Click to expand...
Click to collapse
I Just wanted to know wtf he was talking about ...
I don't overclock it makes no sense on this phone ... i underclock for battery
nabbed said:
Who gives a damn?
Kernels don't "go to" megahertz. Your hardware can either handle it or it can't.
Get any kernel which allows cpu voltage tinkering, and figure out your best speed.
Click to expand...
Click to collapse
Geez, little angry?
This rom is awesome. Everything works as described to this point. I highly recommend.
Sent from my SPH-D710 using XDA App
This rom is amazing. Its the fastest rom that I ever installed on my epic 5239 quadrant score
Sent from my SPH-D710 using XDA App
uMad bro lol just joking quad. Scores mean nothing
Sent from my SPH-D710 using xda premium
First off bench scores are about the same with any Rom depending on the Kernel and they really mean nothing other then posting them.
I have and i am still on this Rom right now but all i get are reboots and when i do reboot my phone loops and i have to flash all over again.
And yes i wipe all before i flash.
rdcrds said:
First off bench scores are about the same with any Rom depending on the Kernel and they really mean nothing other then posting them.
I have and i am still on this Rom right now but all i get are reboots and when i do reboot my phone loops and i have to flash all over again.
And yes i wipe all before i flash.
Click to expand...
Click to collapse
Sucks bro my 1.5 setup works great, not a single issue.
Sent from my SPH-D710 using xda premium
Hey guys Just got my hands on a dinc2. I'm coming from the evo shift, its great to see 3.5 roms. Looks like the incredible 2 has a strong community, I will contribute as much as possible.
What are you guys have your kernel OC'd to? How much undervolted can she take? Does anyone use tv-out?
hightech316 said:
Hey guys Just got my hands on a dinc2. I'm coming from the evo shift, its great to see 3.5 roms. Looks like the incredible 2 has a strong community, I will contribute as much as possible.
What are you guys have your kernel OC'd to? How much undervolted can she take? Does anyone use tv-out?
Click to expand...
Click to collapse
As far as OC and UV I don't bump it real high, as a matter of fact right now I'm running at 1 ghz (stock speed) if I do OC I'm usually running it at 1.3 ghz.
UV usually a decent is -50 under. Much under that and you could run into freezing up.
I don't remember if TV out works very well with this phone (or at all, I just don't remember lol)
Welcome to this awesome phone.
Sent from my Mikrunny'd Superphone using Forum Runner
I overclock to 1.1 GHz and undervolt -75.
Sent from my HTC_Flyer_P512_NA using xda premium
There is dlna, that's as close to tv out as we can get right now
Sent from my DINC2 in Yuma, AZ
1.3 overclock smartassv2 and 50 mv under
Sent from my ADR6350 using xda premium
I'm really enjoying this phone. I have it OC'd @ 1.2 undervolted 25-50 . Running real strong, and very snappy.
I'm diggn this ext4 touch recovery.
Sent from my ADR6350 using XDA App
hightech316 said:
I'm really enjoying this phone. I have it OC'd @ 1.2 undervolted 25-50 . Running real strong, and very snappy.
I'm diggn this ext4 touch recovery.
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Touch Recovery is super slick, no way i can go back. Got mine oc'[email protected] and [email protected] across the board, on sense roms i [email protected] across but on these new ICS roms -25 works just fine, I get decent battery life and a fast phone.
dankblaze said:
Touch Recovery is super slick, no way i can go back. Got mine oc'[email protected] and [email protected] across the board, on sense roms i [email protected] across but on these new ICS roms -25 works just fine, I get decent battery life and a fast phone.
Click to expand...
Click to collapse
I was going to get ICS a shot tonight, its an SDK build isn't it?
Sent from my ADR6350 using XDA App
hightech316 said:
I was going to get ICS a shot tonight, its an SDK build isn't it?
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Cm9 based. Its built from source.
Sent from my Mikrunny'd Superphone using Forum Runner
hell, on CM7 with aeroevan's .7 cfs kerrnel i've gotten a stable 1800mhz overclock with no undervolting...this phone can take a beating
Welcome to the clan my friend
1.8 is a bit extreme. That's not something you won't wanna keep for long periods of time. I heard that can mess things up potentially.
Sent from my Mikrunny'd Superphone using Forum Runner
Ya be weary.. had the original dinc and I fried it.. its not fun at all.. I could only run skyraider and had to have an extremely uv'd kernel for it to just work normal. If I used GPS I had to have my AC on and my phone shoved in the vent or it would restart
Sent from my ADR6350 using xda premium
Zax_Was_Here said:
hell, on CM7 with aeroevan's .7 cfs kerrnel i've gotten a stable 1800mhz overclock with no undervolting...this phone can take a beating
Click to expand...
Click to collapse
Doesn't heat up quick? What's the highest tempature these snap dragons will take before damaging ?
Sent from my ADR6350 using XDA App
Linch89 said:
Welcome to the clan my friend
Click to expand...
Click to collapse
Glad to be here, EVO shift users were mostly rude....
Sorry for dbl post
Sent from my ADR6350 using XDA App
hightech316 said:
Doesn't heat up quick? What's the highest tempature these snap dragons will take before damaging ?
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Yeah, it got pretty warm, but i was careful to make sure i didnt melt a hole in my back cover xD.
I'm not too sure what the max temp these phones can handle is, i'm just giving an extreme example of what the phone can handle, i wouldnt reccomend more than 1.6, at the highest, 1.4 is fine for daily use
Zax_Was_Here said:
Yeah, it got pretty warm, but i was careful to make sure i didnt melt a hole in my back cover xD.
I'm not too sure what the max temp these phones can handle is, i'm just giving an extreme example of what the phone can handle, i wouldnt reccomend more than 1.6, at the highest, 1.4 is fine for daily use
Click to expand...
Click to collapse
i've seen mine around 125 deg before
Zax_Was_Here said:
hell, on CM7 with aeroevan's .7 cfs kerrnel i've gotten a stable 1800mhz overclock with no undervolting...this phone can take a beating
Click to expand...
Click to collapse
it's always cool to do that just for testing purposes but oc'ing your phone to that level will only fry out your cpu faster as well as kill your battery life. not really necessary to oc this phone above 1.3ghz and if you want to save battery uv between -25 to -50.
I have been running 1.4 for a while now. I uv -25, except the top two voltages I leave stock. Might try -50 eventually. Battery life is pretty beasty with smartassv2
Sent from my mobile typewriter with tapatalk
Oh that reminds me actually, when i oc to 1.8 (or is it 1.9, forgot what aero's kernel maxes at) i CANNOT run it at smartassV2
Locks up for me past 1.5ish every time when i'm on smartassv2, i have to switch to smoothass for the phone to work well
However, i've had no problems with smartassv2 below 1.5, which is why i run it on my phone
Is there an way someone can make a rom fast as SRF 1.2 EC05 but maybe for EL30?
Tha_Dynasty2049 said:
Is there an way someone can make a rom fast as SRF 1.2 EC05 but maybe for EL30?
Click to expand...
Click to collapse
Depends on what your definition of "fast" is doesn't it?
But there are lots of new roms out and kernels overclock to 1.4ghz same as genocide I believe, cm7 is very fast imo,
Sent from my SPH-D700 using xda premium
They're all "fast". Try each out and find one that fits your criteria.
Ditch the froyo already and start running some 4.0
Sent from my SPH-D700 using XDA App
b16flybye said:
Ditch the froyo already and start running some 4.0
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Lol yea i kno what you mean
but im running cm9 now and a red theme i kinda edit
Fire n mage said:
Depends on what your definition of "fast" is doesn't it?
But there are lots of new roms out and kernels overclock to 1.4ghz same as genocide I believe, cm7 is very fast imo,
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
well beleieve it or not on 2.2 @ 1.3ghz quadrant score are 2200+
and if you flash srf 1.2 u can actually see the speed in how apps are launched
or even just transitions when holding the screen
El30 roms and cm7 are just as fast if not faster. 4.0 is a bit laggy.
Sent from my SPH-D700 using Tapatalk
Tha_Dynasty2049 said:
Lol yea i kno what you mean
but im running cm9 now and a red theme i kinda edit
well beleieve it or not on 2.2 @ 1.3ghz quadrant score are 2200+
and if you flash srf 1.2 u can actually see the speed in how apps are launched
or even just transitions when holding the screen
Click to expand...
Click to collapse
Since when do quadrant scores mean anything?
Sent from my SPH-D700 using Tapatalk
Zeinzu said:
Since when do quadrant scores mean anything?
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
This. Quadrant faking was very popular during the EC05 days. The main reason you get these scores is that kernels from those time have insane EXT4 tweaks to disable not only journaling, but another form of keeping data. They also have other tweaks to make quadrant go crazy. Admittedly, I have included such tweaks in my older ROMs. I was able to achieve a quadrant score of about 5000...
On MIUI (the gingerbread version) I do not get insane faked scores but my apps open instantly and I get no lag at all... SRF is very outdated and can softbrick your phone even if the battery just falls out or you get a random reboot (due to the tweaks).
I remember the transition from froyo to gingerbread. The phone itself seemed a lot faster but the quadrant scores went down until I added the tweaks that boosted it. Seriously, do not use quadrant or any other tool to judge speed.
Zeinzu said:
Since when do quadrant scores mean anything?
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
like never lol
but they was deff higher on ec05 than el30
but far visual speed to the eye i loved srf 1.2
and well for el30 i mean i like cleangb but still
if u flash srf 1.2 u will see what i mean
marcusant said:
This. Quadrant faking was very popular during the EC05 days. The main reason you get these scores is that kernels from those time have insane EXT4 tweaks to disable not only journaling, but another form of keeping data. They also have other tweaks to make quadrant go crazy. Admittedly, I have included such tweaks in my older ROMs. I was able to achieve a quadrant score of about 5000...
On MIUI (the gingerbread version) I do not get insane faked scores but my apps open instantly and I get no lag at all... SRF is very outdated and can softbrick your phone even if the battery just falls out or you get a random reboot (due to the tweaks).
I remember the transition from froyo to gingerbread. The phone itself seemed a lot faster but the quadrant scores went down until I added the tweaks that boosted it. Seriously, do not use quadrant or any other tool to judge speed.
Click to expand...
Click to collapse
yea i understand but it does give me a type of standing
usually i go by what actually treats my phone better by test
but quadrant and linpack usually gives me a base of things thats all
and srf yes i kno has bugs but thats y i asked if it could
be maybe transffered to a certain extent maybe just speed wise
well visual speed....
We've all been on SFR and loved it at the time, but there's no reason to stay on froyo. I love ACS, don't get me wrong there.
Sent from my SPH-D700 using XDA App
b16flybye said:
We've all been on SFR and loved it at the time, but there's no reason to stay on froyo. I love ACS, don't get me wrong there.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
yea acs is nice but i actually was running midnight a while back
when i was out before i got to srf
but im runnign cm9 and my theme jus not really happy
and well el30 nice i guess im jus stuck with it until anpther phone.
its cool jus was wondering
Technically, the latest modem should be the same or better as the modem before it, as the code in EC05 is added on, not taken away when you see Delta Updates.
Sent from my SPH-D700 using xda premium
Hi everyone just ported over from the evo 3d. I would of thought the e4gt would have a lot of fast roms with my eco on antutu I bench just alil over 7000+. I thought the e4gt would get over 8000 if not close to 9000. but I can for some reason the best ROM I can find is just alike 7600+ and that's with it clock at 1.6. Can someone point me in the right direction? OP yea one last thing how come every ics ROM I tried has some serious low benchmarks I thought ics was going to be God compared to GB?
Cause ICS are leaks right now and overclocking is not able to be done yet. Remember benchmarks dont mean squat.
Sent from my SPH-D710 using xda premium
musclehead84 said:
Cause ICS are leaks right now and overclocking is not able to be done yet. Remember benchmarks dont mean squat.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I know to some people they don't mean anything but to me I due see and feel a better system and benchmarks just confirm it for me all the ics looks cool but is just a Lil to laggy for my
jay2nice000 said:
I know to some people they don't mean anything but to me I due see and feel a better system and benchmarks just confirm it for me all the ics looks cool but is just a Lil to laggy for my
Click to expand...
Click to collapse
My benchmarks were all over too.. on GB, blazer 4.1 with gunslinger oc'd to 1.6g got close to 7300 in antutu, but gets 6600 in quadrant. On ICS, CM9a2 had a quadrant score of 5850 and antutu was about 6300.. (can't OC yet on ICS)
sj
Sent from my SPH-D710 sgs2e4gt on AoKPb31 FD02 AOS 4.0.4 using [email protected] 2 Beta 5
Clark el29 at 1.6
musclehead84 said:
Cause ICS are leaks right now and overclocking is not able to be done yet. Remember benchmarks dont mean squat.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
ICS kernels are now overclockable with Tegrak, sir =]
Sent from my SPH-D710 using Tapatalk
*Luke* said:
ICS kernels are now overclockable with Tegrak, sir =]
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I tried with tegrak can only go up to 1.45 and can't handle it. It can only handle 1.4 I guess I'm gonna play with voltage after my phone cools down
jay2nice000 said:
I tried with tegrak can only go up to 1.45 and can't handle it. It can only handle 1.4 I guess I'm gonna play with voltage after my phone cools down
Click to expand...
Click to collapse
Using the optimization settings you should be able to get a little higher. Getting the voltage right is going to be the trick for sure.
Sent from my SPH-D710 using Tapatalk
*Luke* said:
Using the optimization settings you should be able to get a little higher. Getting the voltage right is going to be the trick for sure.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
thanks for the advice but i over did it i kinda fried my gpu its ok tho i was still under 30 days at best buy. i learned my leason i will no longer overclock pass the kernel lol
fried the gpu, wow. Because Ive had mine maxed at 400mhz and voltage all the way up for hours of benchmark tests. Must of been a bad unit, or Im super lucky.
Sent from my SPH-D710 using xda premium
How you have such high bench Marks ? I'm using cm9 alpha 2 also as a daily driver and once i ran a bench Mark my scores were in the 3000
Epic touch phone of xXHELLBoy91Xx
I have pulled down quadrant scores of 4100 easy running blazer 3.8 rom with stock EK02 kernel some reason my phone really like that one. I have since upgraded to 4.1 and EL29 still able to hit between 3600 to 4000. I have manage a 5550 with gunslinger at 1.6 but it was a clean install NOTHING but setcpu was added and quadrant. to be honest after all that bench marking didnt see a bit of feel diffrence only thing I noticed was how bad it hurt my batt life. I have been playing with supercharged v6 script on stock el29 blazer 4.1 for the past few days seems like it did smooth out a few things and didnt kill my battery maybe you could try that see what happens.
BTW wasnt desperado the kernel used with blazer rom that got like a 6000 not 100% on that but I think it was
pclev99 said:
I have pulled down quadrant scores of 4100 easy running blazer 3.8 rom with stock EK02 kernel some reason my phone really like that one. I have since upgraded to 4.1 and EL29 still able to hit between 3600 to 4000. I have manage a 5550 with gunslinger at 1.6 but it was a clean install NOTHING but setcpu was added and quadrant. to be honest after all that bench marking didnt see a bit of feel diffrence only thing I noticed was how bad it hurt my batt life. I have been playing with supercharged v6 script on stock el29 blazer 4.1 for the past few days seems like it did smooth out a few things and didnt kill my battery maybe you could try that see what happens.
BTW wasnt desperado the kernel used with blazer rom that got like a 6000 not 100% on that but I think it was
Click to expand...
Click to collapse
im not to sure but calkulin rom is better. for some odd reason i couldnt Oc blazers rom but i ran it stock vs calk el29 stock and calk won. though there was another rom that was ics and did beat calks rom but thats when my gpu friend and im gonna try to find it again. it did beat claks stock Non Oc by like 400 points. i know if i could find it again and try messing around with the Oc i could get real close to 8000 benchmark we will see what happens
az18zz said:
How you have such high bench Marks ? I'm using cm9 alpha 2 also as a daily driver and once i ran a bench Mark my scores were in the 3000
Epic touch phone of xXHELLBoy91Xx
Click to expand...
Click to collapse
In my eyes i think GB is faster than ics i used Calkulin's E4GT v3.0 EL29 Oc to 1.6gz. i have tested over the top roms and nothing comes close i have even Oc to 2.00 with other roms and still doesnt beat this rom. though other rom due look better.
TeamERA said:
fried the gpu, wow. Because Ive had mine maxed at 400mhz and voltage all the way up for hours of benchmark tests. Must of been a bad unit, or Im super lucky.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
i think your lucky because everytime i pushed 400 i would only get 10 seconds at best before either it froze or turn my screen green would have to wait till it cooled off to trying messing with it again but thats what i got insurance for