Okay, so I have a HTC Desire which is quite a pain in the ass, the USB is broken so I cannot easily root my Desire. I want to try out some custom roms, but this isn't really possible.
My HTC Desire:
Android 2.3.3
Software 3.14.405.1
Everything stock, S-ON, no root, no custom recovery
What I tried all ready:
Trying to get temp root so I could flash recovery using z4Root & VIOSIONary+, GingerBreak, all failed
Trying to get temp root using the rageagainstthecage method, it shows "Forked Childs", but when i close the terminal my phone will hang or the terminal won't start up again, so still no temp root
First it was still on Froyo, tried all methods. Then I updated it to GingerBread, tried all methods again + GingerBreak.
It's not that it has the USB Brick, it really is a hardware problem.
I spend two days on the problem by searching the form, but I really can't figure it out.
Please help me out!!
With a 2.3.3 and no usb, I'd imagine that what you want is next to impossible. You probably will have to get the hardware fixed before attempting this. Btw, just for completion sake, if I were you, I'd connect it to a Linux box and see if I can get any adb connection. that'd eliminate windows driver issues
Hardware fix wil even be harder, the connector inside is broken and messed up and I really don't know how to fix that. Btw, I already tried on a MAC computer, but also no luck. On a Windows PC it says, USB device not recognized (with HTC Sync installed), code 43, looked that up but couldn't find an answer. An a Mac it says, this device uses to much power and could not be connected for security reason, or something like that. Anyway, thanx for your reply!
Well, I'd say that you're definitely not going to get a solution from here. Try the Alpharev IRC channel. This is beyond most people in this forum.
One question that come's in mind: how the *** are you charging your phone ?
But now on topic. Why not solder a new usb connector to your phones motherboard ?
I just looked at some disassemble movies from youtube, seems like it's not to difficult to remove the broken one and replace it with a new one.
I presume as a junior member i cannot place any direct links, but search for HTC Desire A8181/A8180 Micro USB Data Charging Port Connector and for as low as $2,00 you can fix your problem.
The charger does work but I thing one of the pins for connection to the computer is broken inside.
Thanx for pointing that out, shouldn't be that hard I guess. I'm just going to order one and hope it will solve my problems.
Still i'm wondering, why the rage against the cage method does not work, does anyone else have this problem?
Everything does seem right, I placed it in /data/data/jackpal.androidterm/, changed chmod, execute, it says the "Forked Child, I close my terminal emulator, try to restart but it won't do anything until I restart my phone. I have two terminal emulators, the other one I can startup after the method, but it doesn't give me su. When I try the method again on the other terminal, my phone hangs and it needs a restart. I haven't read it somewhere else that someone has this problem so it's kinda weird.
I suspect that rageagainstthecage was closed in Android 2.3.3. zergrush works, but it operates over adb
Hmm, than maybe another option is control adb via WiFi, but can't found real success stories about that. There are some threads that say there can be a connection via WiFi without root, but can't figure it out, again.
Related
Can you help me, i've made a mistake attempting to downgrade and root an HTC Desire on Voda UK from hboot 0.93. Downgrade seemed to be successful, but the device was stuck in bootloader mode. Since then i have managed to lose my goldcard and flash an uncompatible RUU. And now the screen is dead but if i pop out the battery and put it back in i can hear the start up animation sounds. What can i do to recover my screen? Your advise would be appreciated. Mat
Old versions do not support SLCD (Your Display) hence it turn black (i had hard time, believe me), i personally installed newest official RUU and everithing went OK. But there other solutions, read here http://forum.xda-developers.com/showthread.php?t=748498
wish You luck
Wish i could help you but i don't remember. Been pre-occupied with trying to find a fix and move forward. Can't guarantee that i wouldn't make the same mistake again either. Currently flying blind withthe 'SLCD BRICK FIX Method1' without success.
download ADB to your computer
open up a command prompt/terminal window
cd to your adb/tools directory and type:
adb reboot recovery
Thanks for your reply. I downloaded adb sdk etc but my lack of skill in the command promt is holding me back, not to mention that the Device screen is still black and it isn't recognised by my pc when i plug it in. Don't know what to try next..
With goldcard inserted, started phone in fastboot mode (back key and power button). Flashed back to stock htc rom. Screen is back on and i'm up and running.
Thought i had tried this before but it worked this time (so happy!). Thanks for reading and helping.
Woulda been easier following this guide - as should everyone else currently:
http://forum.xda-developers.com/showthread.php?t=768256
]SK[ said:
Can I ask which method you were using? I see your on Vodafone the same as me. I got my Desire yesterday and want to use OpenDesire however I fear that I will make a mistake and end up in the same situation as yourself.
I was going to follow this http://forum.xda-developers.com/showthread.php?t=768256 guide although I can't as I don't have a SD caddy to plug it into my PC.
*Mods*
Can a mod please fix it so I can post URL's please?
Click to expand...
Click to collapse
URL privileges will be working soon.
And if I come across any new members URL issues I put them in for them.
Would appreciate your help on the following issue (amoled display):
- phone doesnt boot up, it is stuck to a screen showing htc in the middle and 4 small triangles in the corners; if I unplug the pc cable it goes to a RUU menu
- no access to recovery or bootloader menus (by holding power + vol down/back)
- installing stock RUUs dont work; there is a 110 error saying that the RUU is not complete (tried 5-6 RUUs, both 2.1 and 2.2). there is a progress bar on the phone's screen that is normally green, but turns red when the radio is being written (as per the install wizard on the pc) and there is another triangle showing up at the end of the progress bar
- fastboot oem boot restarts the phone, but then it gets stuck to the white screen having htc in the middle (like when you start up the phone and after this quietly brilliant shows under htc, for me it doesnt go beyond this initial point)
- fastboot reboot-bootloader restarts the phone into the same 4triangles screen with htc in the middle
- adb doesnt work as it doesnt show my device
- any power + vol down/back combination brings the phone to the 4triangles screen
- if I run the stock RUU after fastboot oem boot (white screen with htc in the middle) there is a menu showing up on top of the white screen showing up the progress (1-bootloader, 2-radio_v2, 3-radio, then system, recovery, user data, etc.); bootloader is updated ok but then it gets stuck when updating radio_v2 and doesnt move further from that point)
- after the RUU install fails, I plug out the pc cable and see the RUU menu; depending on the RUU that I try to flash the hboot version changes up and even goes down after, but the firmware (what the RUU installer "sees" on the phone) and radio (seen on the RUU menu) remains the same: 1.21.405.1 and 4.06xx; the date on the RUU menu also changes depending on the RUU that I try to flash
Any suggestions to get my desire unbricked?
Bit of a background to the problem:
- rooted (unlockr) and was having Paul's r3 rom (2.1)
- updated the radio to 5.10xx
- got into silly restarts when using gps and thought to reflash a new rom and went for Paul's r8
- restarts were there also when using the phone normally
- thought to re-do all the rooting, wiping out everything from the phone, etc; so having r8 as the rom (pre-baked version) I started the rooting process with creating again the goldcard, etc etc
- error message at some point saying partition update fail (following the steps from theunlockr as I did the first time when rooting) and then the phone got to this triangles screen with htc in the middle
- strange though that this screen is different than the one when I first rooted when there was just one big triangle in the middle
Thanks a ton guys!
I've seen a few posts about this screen with the 4 triangles, but never seen the result of any potential fixes, or if it was ever actually fixed.
Just an idea, but it was maybe a bad radio flash if you are saying it started playing up after that? Unfortunately a bad radio flash is fairly terminal so I hope that's not your problem.
Good luck with this one and if you get it fixed then post the result here if you don't mind!
Will definitely post the solution when found; so far though nobody has any thoughts around what might be the reason behind this problem and how to get around it. I dropped a few PMs to the people that had this problem in the past and contacted Paul at Modaco, but so far no replies...
You can fix this with an RUU, I've had the same issue when I unplugged too early after flashing, but you are asking for help in the wrong section.
thought that the dev's section is where the best knowledge exists...
about the RUU process, I am trying to flash stock RUU.exe files, but there is a problem when the radio is being written and then I get a 110 error from the RUU install wizard saying that the RUU is incomplete.
for you the RUU install worked smoothly?
If you get a write error during an RUU flash (i.e. while the flashing is taking place, not before) it probably means there's a hardware fault.
Could be hardware, but I find it hard to believe as the phone is new and it is network locked, hence I didnt even use it for real, apart from some wifi and gps activities. Besides, the phone worked very well when I first rooted with Paul's r3 and the whole mess with restarts when using gps started after I upgraded the radio to 5.10xx having a 2.1 OS.
I feel that the problem started when I tried to root the phone being on Paul's r8 2.2 OS (tried to root with a 2.1 system and then it got messed up in the process).
I am not saying that it is not hardware as it is a possibility, but still think that it might be a messy software aspect, as if the radio is messed up from a hardware perspective, then at least the system should boot up and then wifi, gps, gsm and the things that are controlled by the radio shouldnt work...but somehow the OS should start-up.
Basically I dont get a write error, it's just that the error comes up when the radio is being written, hence I think that there is something wrong with the radio set-up that I have now on the phone...
Maybe somebody knows how to flash the system from scratch using only fastboot in cmd (having the right zip or img files properly signed), or maybe just the radio to start with.
This is not a Development question and thus should not be posted in the Development forum.
Thread reported.
have a look here. i do not know if it helps though. and i know it is not a Desire
http://forum.ppcgeeks.com/htc-hero/118035-error-110-ruu.html
i also found this. sounds familiar? not for desire but might do the trick http://forum.androidcentral.com/htc-hero-roms-hacks/13171-110-error-ruu-1-56-fix-100-unroot-too.html
sorry if i wasted your time.
acolwill said:
This is not a Development question and thus should not be posted in the Development forum.
Thread reported.
Click to expand...
Click to collapse
Well, I thought that as various solutions to root the phone, to get past different restrictions in the OS, etc. were discussed here, it might be a good thing to develop a way to bring back to life a OS being in this situation like mine...come on...
mariosraptor said:
have a look here. i do not know if it helps though. and i know it is not a Desire
http://forum.ppcgeeks.com/htc-hero/118035-error-110-ruu.html
i also found this. sounds familiar? not for desire but might do the trick http://forum.androidcentral.com/htc-hero-roms-hacks/13171-110-error-ruu-1-56-fix-100-unroot-too.html
sorry if i wasted your time.
Click to expand...
Click to collapse
Thanks anyways man, I looked at that already, but cant get it done as I dont have adb commands available in cmd, only fastboot. Dont worry about waisting my time, I really want that these days
I had the same problem. Passed the device in service center. Changed the motherboard under warranty. It took one month's time.
but to get adb you need to download and install android sdk. look here http://developer.android.com/sdk/index.html system dependands download.
install it here are instructions on how to use if you aren't familiar with.
http://www.londatiga.net/it/how-to-use-android-adb-command-line-tool/
for anything else just use google.
i'm pretty sure that your device is fixable and you can fix it without any service center. cheers and post what ever happens.
popepope said:
Thanks anyways man, I looked at that already, but cant get it done as I dont have adb commands available in cmd, only fastboot. Dont worry about waisting my time, I really want that these days
Click to expand...
Click to collapse
I know how to use adb commands...pretty new to android and everything, but lately I roamed a lot through various things about it and learned a lot.
The problem is that adb doesnt list my phone when I run adb devices, it shows only when I run fastboot devices, I am sure you know what I mean...hence I cannot push any files to the phone, etc., at least not using adb in cmd.
That's actually the problem, that I cannot get adb to work, I only have fastboot commands. At least the way I see it now the question is how can I work with the phone to fix it just by having fastboot access in cmd.
I searched quite a lot various forums, etc, but I never came across a solution that will get things going just by having fastboot in cmd (without adb working). Maybe somebody here will come up with some magic trick...
Nerten said:
I had the same problem. Passed the device in service center. Changed the motherboard under warranty. It took one month's time.
Click to expand...
Click to collapse
How did you end up having this problem, just like that or after some update, flash, etc?
Thanks!
have a look here mate http://forum.androidcentral.com/htc...9-bricked-my-evo-but-there-away-un-brick.html
same story unfortunately, doesnt apply to my problem. in the link they use a terminal emulator, but I cant use that as it doesnt work...it's basically an alternative to using adb directly in cmd, and this doesnt work for me.
if I am to get adb functionality back, then I'm done with the problem in 5 mins probably...
thanks anyways, keeping the hope alive!
sorry idf i don't underdstand, but if you have fastboot working in your device and sdcard also then you should be able to push files to device via fastboot making as clean installs as possible.so if your device is picked up by command line type fastboot to see command list. i'am a bit comfused. pretty sure you should fix it through fastboot though.
popepope said:
same story unfortunately, doesnt apply to my problem. in the link they use a terminal emulator, but I cant use that as it doesnt work...it's basically an alternative to using adb directly in cmd, and this doesnt work for me.
if I am to get adb functionality back, then I'm done with the problem in 5 mins probably...
thanks anyways, keeping the hope alive!
Click to expand...
Click to collapse
right, I can run 2 things with fastboot in cmd: (name of the files just an example)
1. fastboot update update.zip
here I get that the archive doesnt contain android-info.txt or android-product.txt
2. fastboot flash update.img
here i get signature verify fail
for example, fastboot erase radio says FAILED, remote: not allowed
there are some fastboot commands related to the kernel and some others, but dont know how to make use of them for my problem.
sd card is accesible for sure and it is a goldcard.
I saw some linux/ubuntu methods to simulate adb usage in cmd, but I dont think it will work...will try to find an ubuntu image and mount it under windows, but dont have time now...
anyways, thanks to everybody for the suggestions and interest, maybe we'll crack it some day
You need to use an official RUU zip image - i.e. a PB99IMG.zip. Not an update.zip.
It's very strange As it seems to be recognized by the computer but is not found by the AIO 1.13 batch file , I've never used Odin as all I've done is to root and install the SDX Remover. I am able to transfer files to and from my SD Card. I've tried numerous USB Cables including the one which initially allowed me to root, it's the only one of all of my many cables which allows windows to recognize the device and transfer files at usb 2.0 speeds all others either fail recognition or tell me to find a faster port. So I'm at a loss and really, desperately wish to update to froyo. I've tried every tip I've found up to and including shutting down my computer and unplugging it for more than 30 seconds. It's probably something quite simple that I'm overlooking,. I recall having to create a guest account in order to run the batch file and tried that as well. Any tips very much appreciated.
I think I'd like to revert my phone to stock(I think I did a full backup) upgrade to froyo officially than re root or not. I've been way to busy to spend too much time fussing with my phone.
If you are still on stock, which it sounds like you are....just follow the instructions on this post:
http://forum.xda-developers.com/showthread.php?t=963652
since you are already at stock...start from step 11 "download update.zip" and go from there.
Hi guys and girls.
New to XDA but not to Android.
I need some help big time as I'm totally stuck and I'm about to send my phone to "will it blend".
Long story short my memory card will not read when inside the phone all I get under phone storage is "unavailable" with mount being greyed out.
HTC DESIRE HD 2.3.3 (Not Rooted)
Things I have tried:
Factory reset soft/hard both through phone and through power + vol down.
Tried two different mem cards both coming up in storage as "unavailable" the general fix seems to be formatting in fat32 on desktop pc I have done that for both cards (which are both readable on PC) and have even tried formatting through command prompt still no luck.
read alot in ADB/fastboot as it is something I'm abit unfamiliar with saw that users where able to restore sd card function by installing adb then running command prompt: "fastboot oem enableqxdm 0" I get a message saying it was successful I reboot guess what...same problem. One thing I have noticed is if I type "adb shell" I get "Daemon started on port 5079". (I have enable debugging) followed by device not found. have tried two diff usb cables both work with my S2 on either media faceplate or backplate usb ports still no luck. Trust me on this one guys I have searched far and wide and I'm just about read to quit on this. I'm at a dead end any advice would be awesome.
I've tried to resolve the adb method by installing various drivers (running windows 7pro 64bit) the issue I seem to get is that windows doesnt like the drivers Im trying to assign so im forced into have to update them manually through "let me choose a driver from location" blah blah blah...
There is a system update available which may possibly fix my issue however suprise suprise I can't download the update without having an sd card. I have even tried downloading a HTC sdmount widget whether Im downloading the wrong one I dont know? I have got HTC sync installed as others claimed this helped windows detect the correct drivers but then technically speaking its not an ADB interface?? just like to point out that both of the sd cards work flawlessly in my s2. anyone who can help me will get paypal'd a beer!
Thanks
Seb.
OK, I had same problem with my Desire S. I'm running Win7 64bit as well. I un-installed HTC sync, including the drivers. Control Panel>Programs & Features. I then download the latest HTC sync. Went back to Programs & Features and un-installed HTC sync but, left the drivers. Rebooted PC and Win7 picked up Desire S.
Hope this helps
How old is your phone? Depending in which country you are in you may still be under warranty.
Try cleaning the contacts?
Not too sure if you can mount the sd card on phones that are not rooted, or if you have the hboot option/recovery. Fastboot turned off, phone off, then press and hold the down volume button and while pressing it down, press the power button.
If you are not sure what you are looking at do not play around with those options, and it may not work. Not sure if you get those options if you are not rooted.
Do not root your phone, it is improbable it will help, and chances are, it may cause more problems than help.
First option, find out about the warranty.
Edit: just noticed you can boot into hboot. Not too sure if you have the option for recovery and even less if you get the option to mount sd card through there.
2nd edit: I'm not responsible for bad advice. I still haven't had my second cup of coffee
3rd edit: to find out if the adb is working properly and you got the htc sync installed type in whatever the command is in adb to see if it detects your device.
However, try cleaning the contacts and find out about the warranty.
Sent from a dream.
eloquence intshe
Thanks for the reply.
Hehe dont worry you can have some of mine I'm on the 4th cup thats how stressed I am getting with this. Just trying Taysider's method for trying to re-enable the sd card function. I have disabled fastboot using your method so is there a way of mouting sd in recovery? because Im sure I may have tried that already and all I got was an icon of a phone with a red exclamation mark infront of it?
thanks
3rd edit: to find out if the adb is working properly and you got the htc sync installed type in whatever the command is in adb to see if it detects your device.
However, try cleaning the contacts and find out about the warranty.
Sent from a dream.[/QUOTE]
How do I clean the contacts on the sd reader? it doesnt look very accessible unless I remove part of the housing? also what command prompt do you recommend I try first? like I said I tried "adb shell" and got no device found I'll update in a second as soon as I have tried this I have just uninstalled htc sync now all I need to do is assign driver to "android 1.0" in device manager then I'll take it for a spin.
Thanks dude
Ironman MarkV said:
Thanks for the reply.
Hehe dont worry you can have some of mine I'm on the 4th cup thats how stressed I am getting with this. Just trying Taysider's method for trying to re-enable the sd card function. I have disabled fastboot using your method so is there a way of mouting sd in recovery? because Im sure I may have tried that already and all I got was an icon of a phone with a red exclamation mark infront of it?
thanks
Click to expand...
Click to collapse
Re-read my previous post, there' another edit.
Thing is, Im not too sure what options you get nor l, well, anything related to non rooted phones. Do not root your phone as I mentioned previously. Mainly because first you ought to find out if you are still under warranty. If you are, send it to them.
Exclamation mark? Do a search, there were a few threads talking about that a few weeks back, but I believe it was about something else entirely, people effen up their phones trying to root.
From here on, the best advice I can give you is step back, take a break, continue later. There is probably too much info in your head right now.
1- see if adb can detect your phone.
2- try cleaning the contacts, do a search cause I can't remember if the cleaning of contacts was also for the sd card or only the wifi antenna.
3- Check your warranty, I can't stress this enough.
4- Coffee is kicking in
5- Check if you can detect the sd card through recovery. My assumption is that recovery works something like safe mode in windows, only an assumption.
6- Wait till someone more knowledgable than myself joins in. Chances are it would either be darunion, gleviatan or some chap who's nick I cant remember but starts with an M.
@guyinthecorner: you can skip this one - and I'm still waiting for that flashable zip.
Sent from a dream.
Teichopsia said:
Re-read my previous post, there' another edit.
Thing is, Im not too sure what options you get nor l, well, anything related to non rooted phones. Do not root your phone as I mentioned previously. Mainly because first you ought to find out if you are still under warranty. If you are, send it to them.
Exclamation mark? Do a search, there were a few threads talking about that a few weeks back, but I believe it was about something else entirely, people effen up their phones trying to root.
From here on, the best advice I can give you is step back, take a break, continue later. There is probably too much info in your head right now.
1- see if adb can detect your phone.
2- try cleaning the contacts, do a search cause I can't remember if the cleaning of contacts was also for the sd card or only the wifi antenna.
3- Check your warranty, I can't stress this enough.
4- Coffee is kicking in
5- Check if you can detect the sd card through recovery. My assumption is that recovery works something like safe mode in windows, only an assumption.
6- Wait till someone more knowledgable than myself joins in. Chances are it would either be darunion, gleviatan or some chap who's nick I cant remember but starts with an M.
@guyinthecorner: you can skip this one - and I'm still waiting for that flashable zip.
Sent from a dream.
Click to expand...
Click to collapse
Lol, already saw your username and was like 'Yup, problem solved ;-)'
Flashable zip is being a pain in the rear, should have it soon (reading a crap-ton of tutorials to help me)
Sent from my Desire HD using Swype beta for Android!
So I bought a new phone since my old Onyx (One+ X) died (cracked screen and charging port is getting iffy). And finally I decided on this one, a cheap Chinese docomo branded one off Ebay.
I was so exited when it arrived, the UPS truck was at my gate when I got home that day, ready to leave, but the driver was nice enough to wait and give me my package then and there. Pheew.
Well, now to my, bootloader unlocking, recovery flashing, after market os installation and rooting story...
Bootloader:
The phone was supposed to be unlocked, and I guess that only meant SIM unlocked, because the service menu read "Bootloader unlock allowed: no". Damn.
A few Duckduckgo searches later, turned up I needed the "S!Unlock tool" which I found a copy off online, but username/password fields needed to be filled in, and I think I found a pirated s/n which didn't seem to work, (might have if I had tried harder).
But since it was just over £22 at https://networkunlocking.com/ I thought I could spare that on the off chance it worked. I was very surprised when it finally did, truth, I needed a few tries. And it actually did turn that service menu's pesky "no" to a thumbs-up "yes". Yay!
So now, pulling the cable, holding "volume up" and inserting cable for that blue light goodness, and running the "flashtool.exe -i 0x???? oem unlock bootloader 0x????????????" comand.
Not so fast, that doesnät work with newer flashtool versions...
Finding the old one from my Xperia Arc days and runnning it again, Yay!
(Wish I had read ahead and done that temporary root trick to rip my DRM codes off my phone first. But I don't plan to revert to stock, and I gather (might be wrong) that the DRM is only needed for stock roms, and not Lineage OS and such.)
Recovery (TWRP):
Now the problems start for real, getting into recovery was a **** and a half. Most guides for the phone says to push "volume up" multiple times during the boot-process. This turns out to be plain wrong. The actual button combo is holding "volume down" and "power" button together atleast until the screen goes blank after the unlocked bootloader warning.
Now, I wanted 17.1 on the phone and the recommended TWRp is 3.1.1 or something, and this works to install lineage fine, but don't forget to erase /data partition as I did. Stupid mistake that made wifi fail miserably, and probably a lot of other stuff, that I never tried before noticing my mistake.
However trying to get my own set of ringtones on the phone turned out to be another issue, going back into recovery when I noticed my ringtone.zip had failed. Obviously the media folder had moved since los 15.1,so no wonder right? Turns out it wasn't the only problem. TWRP 3.1.1 (or something) failed to unencrypt the root partition, so changing anything via recovery was a lie. fortunately the latest recovery, 3.5.2_9 did. So after installing that everything was rosy peaches.
Rooting:
SuperSU? forget it.
Magisk? yeah, but how? No really good step by step guide out there, except download from the github page, but what version?
A little trial and error, tried with the arm64 version and it turned out to be the right one. (Sometimes you just get it right on the first try...)
Renamed the apk to .zip put it on the phones memory, entered recovery and installed the zip, et voi effing la, Magisk root installed.
Root checker verifies root status, TitaniumBackup and RootExplorer works. Yes, my phone is playing ball.
Final notes:
This above looks simple right? In fact this was a two day process since the guides are surely lacking for this phone, a lot of trial and error, the greatesthurdle was getting into Recovery, until I found the right button combo I accidently managed to enter it once making me believe I had the right combo and something was wrong with the phone. 4 hours or so wasted trying different versions rebooting and flashing. Getting back my Viber messages turned out to be a problem to, TitaniumBackup got the messages back, but the db had references to my old images on my old phone, and probable pointed at the wrong directory so trying to send images either from gallery or take new photos crashed the app. Solution, backup the messages to my google account, uninstall and reinstall viber and restore from that backup. TitaniumBAckup is good but no magic bullet, it's a ***** that we have to rely on Google for backups though, I am allergic to the cloud, something about it makes my skin crawl.
Otherwise I like the phone, it says docomo on the back, something I can live with. The Chinese vendor even supplied one glass screen protector for the phone and a clear soft plastic case, in case I wanted some extra protection. I only wish there was a screen protector that had the same surface as the one that was on the phone in the box, that slightly opaque cloudy feel was so nice on my finger.
Can I recommend this phone? Nah, if noone writes a step by step guide that will cut down the time I spent on making this phone palpatable, I can't. But if you, like me, don't mind to tinker and don't want a phablet or spend way too much for the privilege to get a screen size you don't want, then sure. But why do we have to get them from China?
My trusty xz1 compact is slowly dieing on me and i am looking for a replacement how much did you pay for yours and is a really new or just refurbished ?
"Final notes:
This above looks simple right? In fact this was a two day process since the guides are surely lacking for this phone, a lot of trial and error, the greatesthurdle was getting into Recovery, until I found the right button combo I accidently managed to enter it once making me believe I had the right combo and something was wrong with the phone"
This Phone is in the mobile Sphere already ancient. Don't expect to get any help here or newer hot to guides.
my biggest problem is the fastboot recognition of my Windows. If this would work reliable i could better flash the phone but getting the right driver is a kind of roulette for this phone.
muhschaf said:
my biggest problem is the fastboot recognition of my Windows. If this would work reliable i could better flash the phone but getting the right driver is a kind of roulette for this phone.
Click to expand...
Click to collapse
Also had a non-connecting fastboot issue on Windows until I ran into this guide showing me it was not about a driver but an installation method:
How to install Sony Xperia Drivers Manually (Super Easy Guide)
Step-by-Step guidelines to install Sony Xperia Drivers Manually (this method can be used on Windows XP, Vista, Windows 7, Windows 8, 8.1 and Windows 10).
xperiausbdriver.com
4qx said:
Also had a non-connecting fastboot issue on Windows until I ran into this guide showing me it was not about a driver but an installation method:
How to install Sony Xperia Drivers Manually (Super Easy Guide)
Step-by-Step guidelines to install Sony Xperia Drivers Manually (this method can be used on Windows XP, Vista, Windows 7, Windows 8, 8.1 and Windows 10).
xperiausbdriver.com
Click to expand...
Click to collapse
Handy cannot boot now anyway so i would probably not able to recover anyway.
muhschaf said:
cannot boot now anyway so i would probably not able to recover anyway.
Click to expand...
Click to collapse
The phone completely refuses to boot?
Do you have recovery installed? If not, are you able to install it via fastboot on linux?
4qx said:
The phone completely refuses to boot?
Do you have recovery installed? If not, are you able to install it via fastboot on linux?
Click to expand...
Click to collapse
okay i will explain.
i had this common issue with this running out of internal space (13GB pictures i could not find, only 300MB left) and after looking into it i figured, that, due to my constant app installing and deinstalling, i had literrally thousends of little images (thumbnails, icons, you name it) that got not deintalled for whatever reason and clogged up my internal memory. So i made a Backup and decided to completly wipe and flash the newest lilac from Modpunk (18.1) and did a big Mistake here. i go into recovery and wiped EVERYTHING...without checking that recovery is untouched. then during the same session i installed the ROM and rebooted...so far all nice and dandy. Setting up the Phone, then get the newsest Gapps and then try to reboot into recovery to install them...well did i mentioned that i had wiped EVERYTHING? Well, there was no recovery anymore. Not my first rodeo i headbutt myself into the desk and spun up ADB/fastboot...only to run into the same problem i run everytime due to improper intalled driver i forgot already about. Longs story short: after some time handy refused to boot also into system.
Phone is now unbootable into any state, but Black screen fastboot over hardware buttons...
i COULD still try to make a blind fastboot flash after following the driver install instruction from above, but consider my lucky or clumsyness i will **** this up too and only waste time. and due to my current covid recovery i have not the energy nor the patient to diddle around with this sorry excuse of an absolute restrictive Phone and rather get me a S5 mini or something else that has no bootlock whatsoever and let you flash it from the very start.
i am plain running out of patient with sonys harassment.
/€: Also the constant "cannot get root" on a rooted phone is plain BS³. having permanent trouble to install adaway or use my sdcard proper is so friggin annoying that i now will search for a android version that got rid of this bull**** and will buy any phone that is suported by that ROM.
It is MY phone, and not Goolge nor the the phone company will dictade what i can or cannot install on it. i decide and i carry the risk, period. and the biggest security reason holds the phone anyway.
@muhschaf okay so it doesn't seem bricked. Pretty sure you just need to flash the recovery through fastboot and flash a ROM. Try that on Windows with the driver method; if that fails boot a Linux distro e.g. EndeavourOS, even from a USB without installing no adb/fastboot driver is necessary for Linux, it just works. You can do it.
4qx said:
@muhschaf okay so it doesn't seem bricked. Pretty sure you just need to flash the recovery through fastboot and flash a ROM. Try that on Windows with the driver method; if that fails boot a Linux distro e.g. EndeavourOS, even from a USB without installing no adb/fastboot driver is necessary for Linux, it just works. You can do it.
Click to expand...
Click to collapse
i known, the question is more "i really want that?" like i said i struggle with this phone ever since. and i realized yesterday the problem is not the phone itself, it's the bull**** of androids security architecture. Google seems to be very prone to make sure that they can shove any amount of advertisements down your throat. Given that they earn their money with ad network it doesn't surprise me.
i came to the conclusion that in reality i want to have a reliable way to install ad away on any given phone i own. i archive similar things on my desktop with Firefox and umatrix and ublock. And what can is say: Having Advertisment fee Internet is a bliss and i not care a bit about "but the free stuff" and i incrisingly fury about my inability to archive similar things on my phone i rely quite a bit.
@muhschaf I get it but you know what they say: good things require effort. But I find that once I set my Android up, I'm happy to have done it.
In regards to ads, you can actually install uBO on Android Firefox now, and many other addons also.
So i gave it a try again and the result was that it detects now a "?" under fastboot but ADB can't see anything failing sucsequently to flash recovery. i am also seemingly unable to get even into hardware fastboot anymore. But could be quite possible that the battery is already drained again. so i recharge it the night.
4qx: i was going away from uBO several years ago. Wonder that he has survived the drain after his "whitelist" decision, but it seems like.
Adaway block advertisement in apps and this is mainly the feature i wanted, see advertisment have gotten out of the browser itself into the Base/apps systems (Android, Windows) and therefore the Adblocker have to go with it. under windows i can control the System itself pretty easy and throughoutly with Powershell and package debloating scripts or regedit. under Android i haven't this option and have to rely on app like adaway. This shortcoming is pretty frustraing for an "Open Source" OS
After nearly a Year i stumble upon something windows related and now i have finally my xz1c back:
Windows USB Hubs of ANY kind (Monitor USB Hubs, Powers external USB Hubs, hell sometimes even the PCH, that is technical also a USB Hub), can and sometime WILL prevent proper lowlevel access to devices like...USB Headsets (Logitech Pro X) and Mobile Phones in fastboot mode (xz1c).
To circumvent this you have to connect the phone to a USB Port on the Back of your PC Motherboard DIRECTLY. every other Port can have an USB Hub in between that alters your write or readout and therefore failed the flashing.