So I bought a new phone since my old Onyx (One+ X) died (cracked screen and charging port is getting iffy). And finally I decided on this one, a cheap Chinese docomo branded one off Ebay.
I was so exited when it arrived, the UPS truck was at my gate when I got home that day, ready to leave, but the driver was nice enough to wait and give me my package then and there. Pheew.
Well, now to my, bootloader unlocking, recovery flashing, after market os installation and rooting story...
Bootloader:
The phone was supposed to be unlocked, and I guess that only meant SIM unlocked, because the service menu read "Bootloader unlock allowed: no". Damn.
A few Duckduckgo searches later, turned up I needed the "S!Unlock tool" which I found a copy off online, but username/password fields needed to be filled in, and I think I found a pirated s/n which didn't seem to work, (might have if I had tried harder).
But since it was just over £22 at https://networkunlocking.com/ I thought I could spare that on the off chance it worked. I was very surprised when it finally did, truth, I needed a few tries. And it actually did turn that service menu's pesky "no" to a thumbs-up "yes". Yay!
So now, pulling the cable, holding "volume up" and inserting cable for that blue light goodness, and running the "flashtool.exe -i 0x???? oem unlock bootloader 0x????????????" comand.
Not so fast, that doesnät work with newer flashtool versions...
Finding the old one from my Xperia Arc days and runnning it again, Yay!
(Wish I had read ahead and done that temporary root trick to rip my DRM codes off my phone first. But I don't plan to revert to stock, and I gather (might be wrong) that the DRM is only needed for stock roms, and not Lineage OS and such.)
Recovery (TWRP):
Now the problems start for real, getting into recovery was a **** and a half. Most guides for the phone says to push "volume up" multiple times during the boot-process. This turns out to be plain wrong. The actual button combo is holding "volume down" and "power" button together atleast until the screen goes blank after the unlocked bootloader warning.
Now, I wanted 17.1 on the phone and the recommended TWRp is 3.1.1 or something, and this works to install lineage fine, but don't forget to erase /data partition as I did. Stupid mistake that made wifi fail miserably, and probably a lot of other stuff, that I never tried before noticing my mistake.
However trying to get my own set of ringtones on the phone turned out to be another issue, going back into recovery when I noticed my ringtone.zip had failed. Obviously the media folder had moved since los 15.1,so no wonder right? Turns out it wasn't the only problem. TWRP 3.1.1 (or something) failed to unencrypt the root partition, so changing anything via recovery was a lie. fortunately the latest recovery, 3.5.2_9 did. So after installing that everything was rosy peaches.
Rooting:
SuperSU? forget it.
Magisk? yeah, but how? No really good step by step guide out there, except download from the github page, but what version?
A little trial and error, tried with the arm64 version and it turned out to be the right one. (Sometimes you just get it right on the first try...)
Renamed the apk to .zip put it on the phones memory, entered recovery and installed the zip, et voi effing la, Magisk root installed.
Root checker verifies root status, TitaniumBackup and RootExplorer works. Yes, my phone is playing ball.
Final notes:
This above looks simple right? In fact this was a two day process since the guides are surely lacking for this phone, a lot of trial and error, the greatesthurdle was getting into Recovery, until I found the right button combo I accidently managed to enter it once making me believe I had the right combo and something was wrong with the phone. 4 hours or so wasted trying different versions rebooting and flashing. Getting back my Viber messages turned out to be a problem to, TitaniumBackup got the messages back, but the db had references to my old images on my old phone, and probable pointed at the wrong directory so trying to send images either from gallery or take new photos crashed the app. Solution, backup the messages to my google account, uninstall and reinstall viber and restore from that backup. TitaniumBAckup is good but no magic bullet, it's a ***** that we have to rely on Google for backups though, I am allergic to the cloud, something about it makes my skin crawl.
Otherwise I like the phone, it says docomo on the back, something I can live with. The Chinese vendor even supplied one glass screen protector for the phone and a clear soft plastic case, in case I wanted some extra protection. I only wish there was a screen protector that had the same surface as the one that was on the phone in the box, that slightly opaque cloudy feel was so nice on my finger.
Can I recommend this phone? Nah, if noone writes a step by step guide that will cut down the time I spent on making this phone palpatable, I can't. But if you, like me, don't mind to tinker and don't want a phablet or spend way too much for the privilege to get a screen size you don't want, then sure. But why do we have to get them from China?
My trusty xz1 compact is slowly dieing on me and i am looking for a replacement how much did you pay for yours and is a really new or just refurbished ?
"Final notes:
This above looks simple right? In fact this was a two day process since the guides are surely lacking for this phone, a lot of trial and error, the greatesthurdle was getting into Recovery, until I found the right button combo I accidently managed to enter it once making me believe I had the right combo and something was wrong with the phone"
This Phone is in the mobile Sphere already ancient. Don't expect to get any help here or newer hot to guides.
my biggest problem is the fastboot recognition of my Windows. If this would work reliable i could better flash the phone but getting the right driver is a kind of roulette for this phone.
muhschaf said:
my biggest problem is the fastboot recognition of my Windows. If this would work reliable i could better flash the phone but getting the right driver is a kind of roulette for this phone.
Click to expand...
Click to collapse
Also had a non-connecting fastboot issue on Windows until I ran into this guide showing me it was not about a driver but an installation method:
How to install Sony Xperia Drivers Manually (Super Easy Guide)
Step-by-Step guidelines to install Sony Xperia Drivers Manually (this method can be used on Windows XP, Vista, Windows 7, Windows 8, 8.1 and Windows 10).
xperiausbdriver.com
4qx said:
Also had a non-connecting fastboot issue on Windows until I ran into this guide showing me it was not about a driver but an installation method:
How to install Sony Xperia Drivers Manually (Super Easy Guide)
Step-by-Step guidelines to install Sony Xperia Drivers Manually (this method can be used on Windows XP, Vista, Windows 7, Windows 8, 8.1 and Windows 10).
xperiausbdriver.com
Click to expand...
Click to collapse
Handy cannot boot now anyway so i would probably not able to recover anyway.
muhschaf said:
cannot boot now anyway so i would probably not able to recover anyway.
Click to expand...
Click to collapse
The phone completely refuses to boot?
Do you have recovery installed? If not, are you able to install it via fastboot on linux?
4qx said:
The phone completely refuses to boot?
Do you have recovery installed? If not, are you able to install it via fastboot on linux?
Click to expand...
Click to collapse
okay i will explain.
i had this common issue with this running out of internal space (13GB pictures i could not find, only 300MB left) and after looking into it i figured, that, due to my constant app installing and deinstalling, i had literrally thousends of little images (thumbnails, icons, you name it) that got not deintalled for whatever reason and clogged up my internal memory. So i made a Backup and decided to completly wipe and flash the newest lilac from Modpunk (18.1) and did a big Mistake here. i go into recovery and wiped EVERYTHING...without checking that recovery is untouched. then during the same session i installed the ROM and rebooted...so far all nice and dandy. Setting up the Phone, then get the newsest Gapps and then try to reboot into recovery to install them...well did i mentioned that i had wiped EVERYTHING? Well, there was no recovery anymore. Not my first rodeo i headbutt myself into the desk and spun up ADB/fastboot...only to run into the same problem i run everytime due to improper intalled driver i forgot already about. Longs story short: after some time handy refused to boot also into system.
Phone is now unbootable into any state, but Black screen fastboot over hardware buttons...
i COULD still try to make a blind fastboot flash after following the driver install instruction from above, but consider my lucky or clumsyness i will **** this up too and only waste time. and due to my current covid recovery i have not the energy nor the patient to diddle around with this sorry excuse of an absolute restrictive Phone and rather get me a S5 mini or something else that has no bootlock whatsoever and let you flash it from the very start.
i am plain running out of patient with sonys harassment.
/€: Also the constant "cannot get root" on a rooted phone is plain BS³. having permanent trouble to install adaway or use my sdcard proper is so friggin annoying that i now will search for a android version that got rid of this bull**** and will buy any phone that is suported by that ROM.
It is MY phone, and not Goolge nor the the phone company will dictade what i can or cannot install on it. i decide and i carry the risk, period. and the biggest security reason holds the phone anyway.
@muhschaf okay so it doesn't seem bricked. Pretty sure you just need to flash the recovery through fastboot and flash a ROM. Try that on Windows with the driver method; if that fails boot a Linux distro e.g. EndeavourOS, even from a USB without installing no adb/fastboot driver is necessary for Linux, it just works. You can do it.
4qx said:
@muhschaf okay so it doesn't seem bricked. Pretty sure you just need to flash the recovery through fastboot and flash a ROM. Try that on Windows with the driver method; if that fails boot a Linux distro e.g. EndeavourOS, even from a USB without installing no adb/fastboot driver is necessary for Linux, it just works. You can do it.
Click to expand...
Click to collapse
i known, the question is more "i really want that?" like i said i struggle with this phone ever since. and i realized yesterday the problem is not the phone itself, it's the bull**** of androids security architecture. Google seems to be very prone to make sure that they can shove any amount of advertisements down your throat. Given that they earn their money with ad network it doesn't surprise me.
i came to the conclusion that in reality i want to have a reliable way to install ad away on any given phone i own. i archive similar things on my desktop with Firefox and umatrix and ublock. And what can is say: Having Advertisment fee Internet is a bliss and i not care a bit about "but the free stuff" and i incrisingly fury about my inability to archive similar things on my phone i rely quite a bit.
@muhschaf I get it but you know what they say: good things require effort. But I find that once I set my Android up, I'm happy to have done it.
In regards to ads, you can actually install uBO on Android Firefox now, and many other addons also.
So i gave it a try again and the result was that it detects now a "?" under fastboot but ADB can't see anything failing sucsequently to flash recovery. i am also seemingly unable to get even into hardware fastboot anymore. But could be quite possible that the battery is already drained again. so i recharge it the night.
4qx: i was going away from uBO several years ago. Wonder that he has survived the drain after his "whitelist" decision, but it seems like.
Adaway block advertisement in apps and this is mainly the feature i wanted, see advertisment have gotten out of the browser itself into the Base/apps systems (Android, Windows) and therefore the Adblocker have to go with it. under windows i can control the System itself pretty easy and throughoutly with Powershell and package debloating scripts or regedit. under Android i haven't this option and have to rely on app like adaway. This shortcoming is pretty frustraing for an "Open Source" OS
After nearly a Year i stumble upon something windows related and now i have finally my xz1c back:
Windows USB Hubs of ANY kind (Monitor USB Hubs, Powers external USB Hubs, hell sometimes even the PCH, that is technical also a USB Hub), can and sometime WILL prevent proper lowlevel access to devices like...USB Headsets (Logitech Pro X) and Mobile Phones in fastboot mode (xz1c).
To circumvent this you have to connect the phone to a USB Port on the Back of your PC Motherboard DIRECTLY. every other Port can have an USB Hub in between that alters your write or readout and therefore failed the flashing.
Related
HI,
I used to be more active in this forum, but honestly nowadays I can't found any reason to since everything has been smooth sailing for me without any problems—until this day, at least. Somehow I got my internal sdcard busted, it was pretty spontaneous, all I can recall is suddenly the system starts to reboot itself. Nothing much, I thought to myself, problem is the system keeps rebooting, it doesn't even last a minute. Naturally when faced with this problem one would do the usual procedure, namely completely format the thing to stock the rule out any possibility on the user side of things, but then this is the part when it starts to get interesting...
The thing refused to be formatted, seriously, it baffles me at first but it does
Things I've tried:
Fastboot, it hangs at writing system, whether I was doing it line per line manually or via the flash_all.sh script, I haven't tried the toolkit but I think it's safe to assume that It'll do the same thing. Even if it does go on (which it did, once) it doesn't do any sort of changes whatsoever to the system.
ADB, nope, not this one either. And since the system reboots faster before I can do anything worthwhile it's pretty much out of the question.
Recovery, multiple times I've tried nuking everything via CWM, nada. I've tried TWRP too, I have to boot it from fastboot since it apparently doesn't allow me to flash a new recovery either, it reverts back to CWM every time. Also tried to flash a different ROM (CM), that didn't work, it spits out an error message regarding some failure in changing metadata, thought it was a corrupted file or something, so I re-downloaded it, that doesn't work. Still convinced that it's corrupted I tried 4 different version of it without any luck. Even the one I had successfully flashed before. Interestingly enough, flashing the exact same ROM I'm currently using (ShinyROM) works, not that it seems to do anything.
Built-in data format from settings, now this doesn't work because I assume that it needs the stock recovery to work, which I couldn't flash because it wouldn't let me—in a sense that it flashes just fine on the command line—fastboot doesn't show up any error or anything—but it defaults back to CWM as soon as I reboot it.
Manually via terminal emulator/file manager, still nothing, curiously enough, Terminal Emulator indicates that the whole system is read-only (I tried making a file with it, it shows that exact message).
Grit my teeth, clench my fist and screams out every curse word that I know of, this somewhat reduced my stress levels, but ultimately yields nothing.
Which led to be believe that either my phone was either a) Haunted or b) Has a serious hardware problem, I'm leaning on the latter. A few quick lookup with my limited amount of Google-fu and I've found several threads that described the exact same issue:
http://forums.androidcentral.com/go...-factory-settings-no-matter-method-i-try.html
http://forums.androidcentral.com/go...eset-nexus-7-2102-using-multiple-methods.html
Both of which hints at it being a hardware problem. Which was my biggest fear since I can't really revert the phone back to stock now can I? Locking the bootloader doesn't seem to work either (the 'fastboot oem lock' command works just fine but just like every single thing I've tried, reverts back to my previous setup as soon as I did a reboot), plus this means I have to send it back with my private data still on it, and I can't say I trust Samsung, Google (or anyone really) with my private data. Not to mention some of the stories I've heard/read about Samsung and their policy regarding rooted devices (much less ones with an unlocked bootloader).
In case it helps, here's a few more details:
What state the device is currently in:
It boots up just fine, but nor for long, apps starts to hang and ends up with a cold reboot (sorry if it's not the right jargon, but it starts right from the Google screen).
Everything that doesn't require you to access the filesystem works fine.
Apps doesn't seem to be able to write anything to the filesystem, I tried backing it up with Titanium Backup, much to my surprise the backup files weren't made (although TiBu seems to indicate that they were).
What the device is running:
Variant: Maguro 16GB
ROM: ShinyROM 4.4.2
Kernel: franco.Kernel r395
Baseband: XXLJ1
Bootloader: PRIMED04
Also I don't know if this will affect things but for the record I'm running the latest Ubuntu and Debian.
So this post is pretty much a shot in the dark, since I think I know what I'm dealing with already; if anyone had this problem before in the past, or has it now and somehow managed to fixed it, please do tell. Or if anyone has any experiences RMA-ing your device with a condition like this I'd love to know.
Yep your EMMC is fried. Sorry man.. But you can go to warranty. They *should* accept it since it is a developers phone but they could make a lot of hassle about it being rooted..
Sent from my Galaxy Nexus using XDA Premium HD app
the phone is a sprint gnex.
i had twrp as recovery, and i was playing around with it, got distracted, and my 2 year old grabbed it and wiped everything. no OS, no recovery, no nothing.
i'm not even sure where to start. my newbie self is thinking maybe odin? i used adb once, is that where i should be looking?
i guess my question is where does one start when he has no OS. and i could sure use a link for wherever factory images, or tar files, or whatever, are reposed.
please help a brother out, and keep in mind i am in fact over my head. just trying to salvage this if possible. it is not an urgent thing, as i the device is merely used as a media device for my 2 year old.
my laptop is a windows 7 device. i've downloaded usb drivers for samsung, odin, and adb fastboot. they are sitting in my download folder as zip files. that is where i stand.
boathead said:
the phone is a sprint gnex.
i had twrp as recovery, and i was playing around with it, got distracted, and my 2 year old grabbed it and wiped everything. no OS, no recovery, no nothing.
i'm not even sure where to start. my newbie self is thinking maybe odin? i used adb once, is that where i should be looking?
i guess my question is where does one start when he has no OS. and i could sure use a link for wherever factory images, or tar files, or whatever, are reposed.
please help a brother out, and keep in mind i am in fact over my head. just trying to salvage this if possible. it is not an urgent thing, as i the device is merely used as a media device for my 2 year old.
my laptop is a windows 7 device. i've downloaded usb drivers for samsung, odin, and adb fastboot. they are sitting in my download folder as zip files. that is where i stand.
Click to expand...
Click to collapse
Don't worry you'll be fine.
If you can get into twrp, try just downloading a ROM and gapps zip on computer and using adb to push or sideload to device (Google "adb sideload ROM galaxy nexus...exact steps easy to find)
If you can't get into recovery, or just want to go back to complete stock and start from there, go here https://developers.google.com/android/nexus/images
Grab a package for sprint gnex(mysidspr, aka toroplus) and if u have adb&fastboot installed on computer(if not then Google "installing android SDK" and it will be top result, fastboot and adb come WITH the SDK when u install it)
Then you just unzip that factory img file, plug device into computer while in boot loader mode (hold power and both volume keys), open the folder created when u uncompressed factory IMG file, hold down shift and right click and choose "open command prompt". Enter "fastboot devices"(no quotes) in the command window to make sure device is recognized. Then just run "flash-all.exe" or "flash-all.bat" in command prompt and BE PATIENT AND LET IT FINISH EVERYTHING. After that device will be like brand new out of box.
ashclepdia said:
Don't worry you'll be fine.
If you can get into twrp, try just downloading a ROM and gapps zip on computer and using adb to push or sideload to device (Google "adb sideload ROM galaxy nexus...exact steps easy to find)
If you can't get into recovery, or just want to go back to complete stock and start from there, go here https://developers.google.com/android/nexus/images
Grab a package for sprint gnex(mysidspr, aka toroplus) and if u have adb&fastboot installed on computer(if not then Google "installing android SDK" and it will be top result, fastboot and adb come WITH the SDK when u install it)
Then you just unzip that factory img file, plug device into computer while in boot loader mode (hold power and both volume keys), open the folder created when u uncompressed factory IMG file, hold down shift and right click and choose "open command prompt". Enter "fastboot devices"(no quotes) in the command window to make sure device is recognized. Then just run "flash-all.exe" or "flash-all.bat" in command prompt and BE PATIENT AND LET IT FINISH EVERYTHING. After that device will be like brand new out of box.
Click to expand...
Click to collapse
thank you so much for responding. i will play around with this later, but it is a bit comforting to know that maybe i'm not doomed.
i cannot get into recovery, so yeah, i don't know what i'm doing.
boathead said:
thank you so much for responding. i will play around with this later, but it is a bit comforting to know that maybe i'm not doomed.
i cannot get into recovery, so yeah, i don't know what i'm doing.
Click to expand...
Click to collapse
Why can't you get into recovery?
Are you choosing recovery mode via the bootloader menu? I didn't think it was POSSIBLE to wipe recovery from within recovery.
Even if you can't, trust me, Doing a factory img restore, or using fastboot to flash custom recovery again is VERY easy. To get the SDK that has needed fastboot tools, go here http://developer.android.com/sdk/index.html#ExistingIDE
And grab the needed exe for your setup(windows 64 or 32bit). Make sure you are getting the "ADT bundle" it's what has needed platform tools. Then just run the exe and follow instructions.
Now u COULD also just Google search for Wugfresg toolkit, and download and use that. Its very easy to use as well. I just prefer to have adb and fastboot installed to my computer so that I can always be good to go. Plus I use Linux so Im not able to use Wugfresh, but knowing how to just use fastboot and adb also makes ya feel like a boss(even though is pretty simple lol)
Don't worry, there is hope, and it's not gonna be difficult. You'll be up again in no time.
because you said you didn't think it was possible to wipe recovery from recovery, i went into bootloader. you are correct. in my panic i overlooked it. i DO in fact still have twrp.
but there is nothing to restore or install. so once my phone charges, i'll give it a shot as you suggested. would you kindly check in later in case i need some more help?
thanks my friend for steering me in the correct direction.
boathead said:
because you said you didn't think it was possible to wipe recovery from recovery, i went into bootloader. you are correct. in my panic i overlooked it. i DO in fact still have twrp.
but there is nothing to restore or install. so once my phone charges, i'll give it a shot as you suggested. would you kindly check in later in case i need some more help?
thanks my friend for steering me in the correct direction.
Click to expand...
Click to collapse
Of course!
I'm always checking in these forums, and I use Tapatalk, and have actually grown fond of Tapatalk notifications, so I SHOULD get a notif if you post back or PM(though I prefer to keep in thread, that way someone else searching for answer to similar issue can find a helpful thread as well)
Yea it sounds like your little one got into twrp and most likely wiped all of /data and /system. Instead of just a regular factory reset which would have left your stuff like flashable zips and all still in /sdcard. That sucks! I've actually done that on accideHahaha
hile back(a mistake you only make once to wipe all of /data AND /system lol, even though can pretty easily be fixed)
Sounds like you could use adb sideload or push to get ROM/gapps zips back on the device, or just go with a total device factory restore, whichever you choose at this point should work just fine.
I'm not sure if there is a way to do this yet, but I've always wanted to put a pin code lock for TWRP. That way if my nephew ever did find his way into there when using my phone, he wouldn't be able to do any damage. If it's not a part of custom recovery yet (I haven't looked actually lol) it would be awesome if someone found a way to add that feature in. Could save a lot of us the hassle in cases like this! Hahaha
I'll check back in the morning and randomly tomorrow (some of the day I won't have a connection, I use Gnex strictly on WiFi) to see if you need any help/tips/clarifying of any steps needed. Once you do this restore process once, you'll be amazed at how easy it can be, and as long as you keep the files on your laptop, you'll be ready to go if you ever need to do it again.
success!
i had a great deal of trouble sorting the drivers....took quite a while to get the pc to recognize the device. then i got confused about a few things...stunner, i know, but was able to reflash a factory image with the wug toolkit. so i guess i took the cowardly way and didn't do the adb route.
anyway, i'm good to go. i am left with the initial problem that had me in recovery in the first place. i figured flashing a rom would solve it, but no. so i'm left thinking it is on the server side. at least i have something to work with now.
so thanks again. without your calming words i never would have gotten this going. i don't have the temperament to play around with my devices, i've learned.
boathead said:
success!
i had a great deal of trouble sorting the drivers....took quite a while to get the pc to recognize the device. then i got confused about a few things...stunner, i know, but was able to reflash a factory image with the wug toolkit. so i guess i took the cowardly way and didn't do the adb route.
anyway, i'm good to go. i am left with the initial problem that had me in recovery in the first place. i figured flashing a rom would solve it, but no. so i'm left thinking it is on the server side. at least i have something to work with now.
so thanks again. without your calming words i never would have gotten this going. i don't have the temperament to play around with my devices, i've learned.
Click to expand...
Click to collapse
That temperament is something that is gained. MOST of us have been in that "oh holy crap what do I do now?!?! Im not prepared for this!!" Moments (my first one was on my birthday back when I had DroidX2, and didn't have my own computer to restore it using RSDlite sbf flash.. I accidentally flashed something that didn't work, and was left with no OS stuck in bootloop with no way to get into the bootstrap recovery we had...was without device for 3 days until I could get to a coworkers laptop!! Lol!!!) But the stress goes WAY down after you've restored device once or twice and have the tools at the ready with basic understanding of the steps at least
And as for drivers, I apologize for not warning/informing about that. I forgot that you mentioned you had multiple driver packages downloaded and i was going to clarify which to use(on a Linux setup you don't need drivers and it been a while since I used windows for my device so drivers aren't usually on my mind lol) I think a lot of people use the PDAnet drivers. But if you are connected to internet and just put device in fastboot mode and connect to computer, I think it will automatically find and install the correct drivers needed for fastboot/adb access.(the toolkit can also be used to install correct drivers I believe)
And don't worry, I wouldn't call using toolkit the "cowardly way". SOME people detest/despise use of toolkit since they think it takes away from learning and understanding how to do it without a toolkit. But when you use a toolkit you usually see command prompt correct? (Or at least a setting so you can SEE what it is running as far as commands) so you get to see what its doing, which helps beginners start to grasp the concepts of what it is doing.
Trust me, if you can use the toolkit correctly, you can easily transfer that knowledge to just using fastboot or adb commands.
by the way, fastboot is what's used for factory image restore. ADB is for pushing/pulling files, taking logs, sideloading a ROM/gapps zip that isn't on device, taking/restoring adb backups of system and or data, things like that. Think of adb as the "taker and giver". And fastboot as the "img installer/booter"...imgs being anything from system img files, to data partition img files, boot.img(aka kernel), recovery.img, bootloader update img, radio imgs. Things like that
The reason the knowledge from using toolkit easily transfers over to using just straight up fastboot for example is because of how they word the choices and menus. You will see it says something like "use fastboot to flash new recovery img", which the fastboot command for that in command line equates to "fastboot flash recovery "NameOfRecoveryImage.img" "
(With no quotes of course, and replace "NameOf...." With the actual file name of the recovery.img you have downloaded, and you can rename the downloaded recovery img file to something easier to type out if you want to also)
Basic structure of using fastboot command would be as follows:
fastboot[space]command[space]partitioname[space]filetobeused
Which after used once or twice is very easy to grasp basic usage
So are you able to at least boot into OS now? Also, make sure if you are trying to flash a KitKat ROM, that you install the 2.7TWRP recovery, anything earlier won't work correctly for 4.4based ROMs.
Again, any trouble feel free to ask.
(And apologies for the long rambling posts lol)
yes. i am in the OS now.
what gave rise to my troubles in the first place is that i've moved my residence. all my devices recognize my new wifi, and proceed along their merry way.
my gnex is another story. it recognized my wifi, shows me as connected, but nothing at all can actually access the server. i tried factory reset, nothing. then i was going to install a new rom, figuring something was corrupted. then my 2 year old took over!
so i am in the OS, but still cannot access the server. so it must be on the server side i figure. not sure how to fix this, but when i have some time, i'll do some looking around. i am going to try to access a different wifi network later on to see if at least it is not my device.
again, thanks for your help my friend.
boathead said:
yes. i am in the OS now.
what gave rise to my troubles in the first place is that i've moved my residence. all my devices recognize my new wifi, and proceed along their merry way.
my gnex is another story. it recognized my wifi, shows me as connected, but nothing at all can actually access the server. i tried factory reset, nothing. then i was going to install a new rom, figuring something was corrupted. then my 2 year old took over!
so i am in the OS, but still cannot access the server. so it must be on the server side i figure. not sure how to fix this, but when i have some time, i'll do some looking around. i am going to try to access a different wifi network later on to see if at least it is not my device.
again, thanks for your help my friend.
Click to expand...
Click to collapse
what security do you use on your router? if WEP try changing it. the gnex has issues sometimes with using WEP secured WiFi AP's
also, if using a 5ghz network, I can only get mine to connect to that on channel 153. there are only a certain number of 5ghz channels supported.
might also want to just try forgetting WiFi network and re add?(if it restored the access points by any means including Google backup/restore)
and make sure your router isn't rejecting the Mac address for some reason(and some people will suggest reboot of the router to see if that helps fix it, which I've seen fix many connection issues)
well, my device works beautifully....everywhere except in my house.:crying:
as much as drivers befuddle me, routers do even more so. it must be a router issue, right? my device connects to google elsewhere. and all my other devices connect to google here at home. maybe tomorrow i'll try the router's live chat to see if i can get some help.
boathead said:
well, my device works beautifully....everywhere except in my house.:crying:
as much as drivers befuddle me, routers do even more so. it must be a router issue, right? my device connects to google elsewhere. and all my other devices connect to google here at home. maybe tomorrow i'll try the router's live chat to see if i can get some help.
Click to expand...
Click to collapse
what type of security are you using in the router setting? WPA? wep? none?
what model router are you using?
is device connecting to internet and just not Google servers?
is device connecting to router at all and just no internet access?(meaning when you are in WiFi settings, and choose network does it show obtaining IP address and then connected? or just never fully connect?)
I've had similar issues in past and might be able to help with some more details
ashclepdia said:
what type of security are you using in the router setting? WPA? wep? none?
what model router are you using?
is device connecting to internet and just not Google servers?
is device connecting to router at all and just no internet access?(meaning when you are in WiFi settings, and choose network does it show obtaining IP address and then connected? or just never fully connect?)
I've had similar issues in past and might be able to help with some more details
Click to expand...
Click to collapse
wpa2...but i've even disable all security to see....i've disable firewalls...nothing. it is an arris router that time warner cable provided when i moved to my new place.
and i my phone does show me as connected to my network...just can't get into google. and the phone works just fine at my work. as you know, i've been through several roms and an entirely new OS...so it cannot be the phone...can it?
been through this entire threads, and no joy.
http://forum.xda-developers.com/showthread.php?t=2110225
if you have any ideas, post away. i will be away from access to the internet for a few days, so i won't even have a chance to check in here, but any info in the meantime would be most thanked.
boathead said:
thank you so much for responding. i will play around with this later, but it is a bit comforting to know that maybe i'm not doomed.
i cannot get into recovery, so yeah, i don't know what i'm doing.
Click to expand...
Click to collapse
my samsung s5 had the same problem. i wiped out everything and it says i have no os no nothing. i hope if anyone can help, i will be pleased.
the only question is that "how can i get an os and get my phone working"
ashclepdia said:
Don't worry you'll be fine.
If you can get into twrp, try just downloading a ROM and gapps zip on computer and using adb to push or sideload to device (Google "adb sideload ROM galaxy nexus...exact steps easy to find)
If you can't get into recovery, or just want to go back to complete stock and start from there, go here https://developers.google.com/android/nexus/images
Grab a package for sprint gnex(mysidspr, aka toroplus) and if u have adb&fastboot installed on computer(if not then Google "installing android SDK" and it will be top result, fastboot and adb come WITH the SDK when u install it)
Then you just unzip that factory img file, plug device into computer while in boot loader mode (hold power and both volume keys), open the folder created when u uncompressed factory IMG file, hold down shift and right click and choose "open command prompt". Enter "fastboot devices"(no quotes) in the command window to make sure device is recognized. Then just run "flash-all.exe" or "flash-all.bat" in command prompt and BE PATIENT AND LET IT FINISH EVERYTHING. After that device will be like brand new out of box.
Click to expand...
Click to collapse
The same thing happened to me right now, while I was installing CM13 in my Lenovo Zuk Z1. I took a backup from TWRP and copied the same to my pc. Then I wiped all the data from my phone using TWRP. Then I plugged in the Usb back to copy the downloaded files of CM13 to my phone but my pc is not showing the Internal Memory of my phone. I am so freaked out right now. I dont have an OS in my phone and I am unable to restore what I backed up. I am just stucked in TWRP. Guide me through to install CM 13 or atleast revert back to where I started. Any help is appreciated.
A brief history:
Several weeks ago my stock Gingerbread G2's touchscreen started dying. Replacing the touchscreen didn't solve the problem. I was able to continue using it via the keyboard for a little while and, in the meantime, enabled USB Debugging (thank the stars!) while I waited for a replacement phone to arrive. I could still access some functions using the keyboard & thumbpad, although usability was limited due to the inability to back out of an application. Cue lots of battery pulls to restart at the homescreen (a pox on designers who forget one of the fundamental rules of UI: It should always be possible to go back using the current input device!).
Then the screen started a somewhat frazzled HTC image loop during boot, shortly after I started testing ADB & fastboot. Curiously it was still booting the underlying OS, as evidenced by the various chimes telling me I had messages etc, and I could still access it via ADB.
My new phone arrived (a Sony Xperia Z3 Compact. I still would prefer a proper keyboard though. Another pox on designers/manufactures who focus on marketing fads instead of functionality. I don't give a rat's arse if my phone is only 2.48291mm thick and has a screen the size of my 1st laptop. I want something small enough to use in one hand, and that has a hardware keyboard) & happily downloaded my contacts from the Borg....I mean, Google, but not notes or SMS/MMS etc. Leading to today....
I tried Sony's transfer app, but without screen viewing let alone touchscreen ability it wouldn't work (PC version, due Android version on the problem phone wasn't acceptable). Ditto problems with other root exploits. Even trying to use a recovery image on the SD card wouldn't work due to the non-root status. The recovery menu would only accept a stock image. An overriding consideration was that I didn't want to just gain root by what ever method, but I wanted to preserve my notes & sms/mms data, so fastbooting a factory image wasn't satisfactory - as far as I could tell, that would delete everything. After over a week of 0300, 0400, 0530 bed times while reading & trying the methods given in some huuuge number of XDA threads and some other websites, last night I was able to get temp root using the fre3vo exploit! Yay! At one point I had 70 threads open. It was an XDA-dev. thread that gave me the exploit though. Still couldn't do a simple Linux/Unix cp command in ADB shell to save the data but at least the file system was accessible now. Bloody frustrating!
Anyway, a bit more Googling & XDA-ing to find file locations & command formats and tonight I was able to use the ADB pull command to download the whole of the /data directory to my PC. Data saved! Even better, the Linux distro on my PC already has SQlite software to open the files. Even more yay!
I haven't tried to upload to my Xperia Z3C, but I will soon. Meanwhile my data is now available in my PC so phone access isn't as important anymore.
Some thoughts on what I went through:
Manufacturers: You do your customers a vast dis-service by making it so hard to salvage the data.
Service providers: Ditto, due to your insistance on locking down the system on the phones you sell
XDA contributers: I couldn't have done this without you, however.....it would have been easier if you *always* specified what would change/be wiped when you describe your exploit/change/recovery process. I was hesitant to try some methods due to not knowing if my data would be wiped in the process.
And after all that: Who the hell would ever want a phone that wasn't rooted? I don't even install Linux OS on my systems unless root can be gained (Ubuntu & Mint, I'm looking at you! Sudo isn't sufficient...) so I've learnt a lesson on my phone. If only I'd rooted it while it was still fully functional!
Next task? Rooting my Z3C before something goes ' bzzzzt!' on it!
Short version of question: How can I unbrick my ONEPLUS 3 (A3000) if I cannot boot to Android and OEM Unlock AND USB Debugging both have not been enabled?
Long version: Phone was recently purchased second hand from a third-party market (Kijiji, kind of like craigslist for Canadians). Person I bought it from claimed in the ad that the device was in a bootloop and couldn't access the OS. I had in the past successfully saved a ONEPLUS 1 from bricked status, so I didn't feel a simple bootloop would pose much of an issue. That, and at the price he was selling I really couldn't turn it down.
I tried various different methods of restoring the phone's partitions, OS, and firmware to stock/custom, but had no real luck with any (I will list below what I have attempted). If there was a root cause of this, I believe it's due to the fact that some part of the phone's storage partition (boot or system if I had to guess) had become corrupted at some point. Given the volume of threads I've seen here and elsewhere online, I wouldn't rule out a bad OTA flash, but doesn't really matter. What does matter, however, is that the Android OS is inaccessible despite my best efforts, and the bootloader is set to locked and ADB Debugging remains off.
Generally speaking, is there a way to access Developer Options to correct both these issues through terminal or a tool? I'm confident that I can get my device working again if I could access this menu, but as of yet I have had no luck.
Methods used to restore/info worth mentioning
While I don't doubt their effectiveness at large, for whatever reason I have yet to find a tool/guide that yields the anticipated results upon completion. MSM Download Tool (V3 and V4) have both been downloaded, executed, and completed numerous times, but will still not boot past the loading screen upon completion.
According to Unified Android Toolkit, my device build is being detected as "OnePlus3 7.0 NRD90M" and All-in-One Toolkit is showing that Android 6.0.1 is installed.
Drivers are all installed correctly, as proven both via tools downloaded and through Windows CMD terminal (adb devices, fastboot devices, adb get-state, etc)
Stock recovery and bootloader modes can both be reached through both hardware keys and software commands. I will note that it seems to take longer than I'd expect to boot to either of these modes using hardware keys.
I have utilized multiple USB ports, Type-C cables, different OS' on two laptops (MS Windows 10 and 7, FWUL Linux). I usually have no problem with the device being detected by the system. When I have, it usually involved one pesky USB cord.
common commands used and their effects:
fastboot OEM unlock: fails, cannot be done remotely
fastboot flash x: fails, remote: flashing partitions not allowed
ADB push: fails. cannot access partition
ADB devices: device is seen by system with serial and state
fastboot devices: device is seen by system with serial
ADB sideload: varying results. Some will fail at 0% citing "total xfer: 0.00x", some will reach 47% and fail (always exactly 47% oddly). Generally if the sideload operation passes 47% it will complete.
fastboot format/erase x: fails, partition formatting/erasing not allowed
fastboot continue: executes, but does not help with android bootloop issue as I had hoped
While I searched for an answer online, I did come across an infosec whitepaper regarding ONEPLUS 3 vulnerabilities, though it was over a year old. To my surprise, the command they had been entering works on my device, but I'm not sure how to properly use it effectively. The command used was fastboot OEM boot_mode [rf/wlan/ftm/normal]. Now, I was unable to determine what each of the triggers does, but what I did discover is that with boot_mode set to rf, my device would display chinese/korean lettering in lieu of the usual ONEPLUS logo with "powered by Android" below. This is also how I managed to have my device show up in CMD terminal for ADB commands to be issued. To the best of my knowledge though, there doesn't seem to be much point to it as I couldn't push/pull any files. Does anybody know where I could find more info on this command, as I'd like to know what the other triggers accomplish.
I've just about exhausted every available resource looking for an answer, but im still coming up short. I've gone as far as contacting ONEPLUS directly, but without proof of purchase they can't (more accurately won't) help me. And while it's not a business practice I would personally support, I can understand why they have it implemented. I've contacted a few phone shops in the area, but none have been able to assist me further than I've already gotten in this process.
I apologize again for creating a new thread about this, but I felt my circumstances warranted a new thread due to the bulk of the others having either an unlocked bootloader or TWRP installed, neither of which I do.
So, can anybody offer their help or suggest something I haven't already tried? Or should I be on EBAY looking for motherboards? Thanks in advance.
Calgary84 said:
Short version of question: How can I unbrick my ONEPLUS 3 (A3000) if I cannot boot to Android and OEM Unlock AND USB Debugging both have not been enabled?
Long version: Phone was recently purchased second hand from a third-party market (Kijiji, kind of like craigslist for Canadians). Person I bought it from claimed in the ad that the device was in a bootloop and couldn't access the OS. I had in the past successfully saved a ONEPLUS 1 from bricked status, so I didn't feel a simple bootloop would pose much of an issue. That, and at the price he was selling I really couldn't turn it down.
I tried various different methods of restoring the phone's partitions, OS, and firmware to stock/custom, but had no real luck with any (I will list below what I have attempted). If there was a root cause of this, I believe it's due to the fact that some part of the phone's storage partition (boot or system if I had to guess) had become corrupted at some point. Given the volume of threads I've seen here and elsewhere online, I wouldn't rule out a bad OTA flash, but doesn't really matter. What does matter, however, is that the Android OS is inaccessible despite my best efforts, and the bootloader is set to locked and ADB Debugging remains off.
Generally speaking, is there a way to access Developer Options to correct both these issues through terminal or a tool? I'm confident that I can get my device working again if I could access this menu, but as of yet I have had no luck.
Methods used to restore/info worth mentioning
While I don't doubt their effectiveness at large, for whatever reason I have yet to find a tool/guide that yields the anticipated results upon completion. MSM Download Tool (V3 and V4) have both been downloaded, executed, and completed numerous times, but will still not boot past the loading screen upon completion.
According to Unified Android Toolkit, my device build is being detected as "OnePlus3 7.0 NRD90M" and All-in-One Toolkit is showing that Android 6.0.1 is installed.
Drivers are all installed correctly, as proven both via tools downloaded and through Windows CMD terminal (adb devices, fastboot devices, adb get-state, etc)
Stock recovery and bootloader modes can both be reached through both hardware keys and software commands. I will note that it seems to take longer than I'd expect to boot to either of these modes using hardware keys.
I have utilized multiple USB ports, Type-C cables, different OS' on two laptops (MS Windows 10 and 7, FWUL Linux). I usually have no problem with the device being detected by the system. When I have, it usually involved one pesky USB cord.
common commands used and their effects:
fastboot OEM unlock: fails, cannot be done remotely
fastboot flash x: fails, remote: flashing partitions not allowed
ADB push: fails. cannot access partition
ADB devices: device is seen by system with serial and state
fastboot devices: device is seen by system with serial
ADB sideload: varying results. Some will fail at 0% citing "total xfer: 0.00x", some will reach 47% and fail (always exactly 47% oddly). Generally if the sideload operation passes 47% it will complete.
fastboot format/erase x: fails, partition formatting/erasing not allowed
fastboot continue: executes, but does not help with android bootloop issue as I had hoped
While I searched for an answer online, I did come across an infosec whitepaper regarding ONEPLUS 3 vulnerabilities, though it was over a year old. To my surprise, the command they had been entering works on my device, but I'm not sure how to properly use it effectively. The command used was fastboot OEM boot_mode [rf/wlan/ftm/normal]. Now, I was unable to determine what each of the triggers does, but what I did discover is that with boot_mode set to rf, my device would display chinese/korean lettering in lieu of the usual ONEPLUS logo with "powered by Android" below. This is also how I managed to have my device show up in CMD terminal for ADB commands to be issued. To the best of my knowledge though, there doesn't seem to be much point to it as I couldn't push/pull any files. Does anybody know where I could find more info on this command, as I'd like to know what the other triggers accomplish.
I've just about exhausted every available resource looking for an answer, but im still coming up short. I've gone as far as contacting ONEPLUS directly, but without proof of purchase they can't (more accurately won't) help me. And while it's not a business practice I would personally support, I can understand why they have it implemented. I've contacted a few phone shops in the area, but none have been able to assist me further than I've already gotten in this process.
I apologize again for creating a new thread about this, but I felt my circumstances warranted a new thread due to the bulk of the others having either an unlocked bootloader or TWRP installed, neither of which I do.
So, can anybody offer their help or suggest something I haven't already tried? Or should I be on EBAY looking for motherboards? Thanks in advance.
Click to expand...
Click to collapse
Thanks for the exhaustive description. You seem to have covered every known method. If the MSM Tool also fails, I think that it is a hardware issue and you are better off searching for a new motherboard instead of wasting further time on trouble-shooting.
Best of luck!
tnsmani said:
Thanks for the exhaustive description. You seem to have covered every known method. If the MSM Tool also fails, I think that it is a hardware issue and you are better off searching for a new motherboard instead of wasting further time on trouble-shooting.
Best of luck!
Click to expand...
Click to collapse
I was afraid of that..... is there a way to test a given hardware component?
Have you tried the unbrick tool FULL updated: https://mega.nz/#!NmhhgZyB!CM7Fw8VjECiMIhh4gRXUx24QVCiE599_ZFAPDf08AiM
acetone802000 said:
Have you tried the unbrick tool FULL updated: https://mega.nz/#!NmhhgZyB!CM7Fw8VjECiMIhh4gRXUx24QVCiE599_ZFAPDf08AiM
Click to expand...
Click to collapse
Indeed I have, dozens of times between the full and mini versions. I've even gone as far as running the toolkits featuring MSMDownloadTool v4.0 to see if it achieved different results (it did not). The mini tool would finish doing its thing (turned the text green upon completion),but I would face varying partitions not being flashed correctly. The full version completes and does not have these varying partitions missing, but the device would then be either stuck in a bootloop where it will eventually reboot itself, or would hang indefinitely on the "swirling dots" loading screen. I tried the remedy of deleting cache in recovery, but this did not help.
deleted
***UPDATE*** - As I mentioned in this thread earlier, I noticed a discrepancy between the variant type listed on my actual device and the variant type returned when queried via fastboot. This got me thinking, and to make a long story somewhat shorter, I found that while most stock Oxygen images I attempt to sideload onto the device fail (at precisely 47%, oddly), I was able to sideload two different Hydrogen images without any resistance at all. I'm guessing something to do with the eMMC vs UFS file storage systems and how each OS uses them.
So I got Hydrogen flashed onto my my device. Smooth sailing, right? Afraid not. Despite fastboot's output clearly stating it was a successful transfer, and the stock recovery on the device echoing this, I still cannot get the OS to load. Now i' stuck with the loading screen hanging indefinitely prior to animation occurring, so basically the static ONEPLUS logo. Factory resets and cache wipes have done nothing to help the situation along. Conventional wisdom from the threads here seem to say using the MSMTool is the right answer..... and thus the circle of frustration is complete with me arriving back where I started. Does anybody have another suggestion I can try out? Still can't flash/boot to TWRP, unlock bootloader, or access Android to activate USB Debug/OEM Unlock either btw.
Have you tried flashing just the firmware, i havent flashed in years but i would assume you could sideload the firmware as well?
voodooline said:
Have you tried flashing just the firmware, i havent flashed in years but i would assume you could sideload the firmware as well?
Click to expand...
Click to collapse
Guess who didn't read? And after a year without flashing + a lack of reading skills, you still think you could solve this case? That's a spirit.
===
You better do pm some devs in dev section and point them to this thread and see if they can help, if you are still curious.
My guess is dead emmc, it can be replaced without buying the whole board.
150208 said:
Guess who didn't read? And after a year without flashing + a lack of reading skills, you still think you could solve this case? That's a spirit.
===
You better do pm some devs in dev section and point them to this thread and see if they can help, if you are still curious.
My guess is dead emmc, it can be replaced without buying the whole board.
Click to expand...
Click to collapse
I did read it, its funny always someone who has to be a **** about things. I should have been more specific. He was able to flash h2os. So he could try to flash the firmware for h2os to see if that gets it to boot.
voodooline said:
I did read it, its funny always someone who has to be a **** about things. I should have been more specific. He was able to flash h2os. So he could try to flash the firmware for h2os to see if that gets it to boot.
Click to expand...
Click to collapse
Magnificent, bro.
You're a truly genius.
Hi all!
Some days ago I urooted my TV android tv box with superSU and then I restarted it. From that moment when I plug the device it only reach the T9 logo (not the android one) and don't go further.
I've tried different ways to try to unstuck it, but nothing has worked.
I tried:
- enter recovery boot by holding the button in the av hole -> nothing happens
- install new firmware with adb sideload with both ubuntu and windows 10 -> always get errors (often error: closed, sometime other errors that at the moment don't remember)
- install new firmware with sd card using SDCard Installer -> the device doesn't boot when the sd is inserted
Moreover, with adb in ubuntu sometimes it recognises the device and I can enter the adb shell (but obtain errors when try any tipe of command), and sometimes don't (after adb devices I see list of attached devices: ??????????????? offline)
Now I'm thinking to try to install an ubuntu like on an usb pendrive...
I will be very grateful of any help/suggestion to how to revive my device :fingers-crossed:
Thank you!!!
Does this happen to be a pendoo model? I have a pendoo x10 MAX and i actually simply just installed supersu while it was rooted. Since then, I haven't gotten this thing to boot. Just stays on the boot screen the entire way. I wiped in recovery, knew that'd do nothing. I just wanted a root MANAGER. I tried Magisk, my favorite.. no go.. so then I went a bit old school.. so I tried ChainFire's SuperSU.. and THAT updated the SU binary! It said it succeeded.. it asked to do recovery install or normal install.. on phones, I've always done normal.. so I chose normal. Plus.. this thing has no custom recovery. I found it on Amazon. Overpriced, but great with the controller it had. It looks like I'll need a replacement and maybe a request to ask this guy if he could possibly NOT use something like KingRoot/KingoRoot/AmaraRoot or ANY One click root tool.. they just cause more bloatware, inciting boot issues and problems within the Android box itself. These One Click Root tools are out of control. It's to the point where I need to find a way in to adb and find the firmware for the latest version of this thing... X10Max from Pendoo.. I have not found a thing anywhere regarding firmware, and their website is ****. NOTHING *anywhere* on these things.. hell I'm about to return it as I bought it for $72. I have another one, same model.. wondering if the root method was different. About to boot that up and find out. I'll even swap the board. At this point.. he rooted it.. the WRONG way.. you can MOUNT THE /SYSTEM PARTITION IN RECOVERY. THIS IS ANDROID 9 we're talking about--the recovery supported by API v3.
This can and should have a TWRP custom recovery. If none exists, don't bother. As long as you can mount /system then you have a chance, at least, to root the damn thing.. which is why I'm still messing with it. I have another two weeks to return it. I'll give it another couple of days before I call it off and just switch out the good board for the bad one, return it, then return the other one and just use it until I find a way to use a custom recovery on this thing. There has to be.. unless there is no firmware available in sight (for an RK3318 or 3328, can't tell.. recovery mode says 3328, model name says RK3318. I see no difference at the moment aside from processor naming at this point--maybe speed?)
I'm still a nub with Android TV boxes so don't hold it against me for updating the damn root binary. If I could find a way to just reinstall the entire firmware and delete all previous stuff, I would. It would be worth it to learn. I would then mount /system in recovery and soldier on.
One little issue with this thing.. there's only one USB port that actually works. Same applies for the same exact product, a replication of the same thing.. was a "replacement" that still have/has the same qualities.
I've ranted enough. I vote more research into RK33xx processors and possible custom recoveries. I'm about to look for it based on only the device itself.
Note: Been stuck at boot screen ever since the binary was updated. I felt it was necessary to have a boot manager. I don't know where to even find the firmware. Can.. anyone point me in any direction? Something that MIGHT work on this thing? Android 6 or 7 would even suffice, return or no return, as "stuck on boot screen" will be my complaint. That's.. the actual complaint. I can't just *flash it* like the old days.. and maybe the original Android 9.0 firmware would suffice.. I don't know, but Pendoo.. wouldn't that be preferred?
You will need an SDcard to recover this box. I think the T9 32GB 4GB rom will do the job since its a cut down version.
Make a update SDcard and pop it in and power on the box. It will start the recovery on its own.
hello, sorry for my English I live in France I would have a question about the box: TV T9 RK3318, 4gb / 64gb. the problem is that the time is desynchronized on restart and creates problems to connect to applications when the time is out of order, I tried everything changed the time zone to deactivate and entered the time Manual it goes out of order all the time . is there a custom version or a version 10?
Very cook did I checked this out awhile back alot of good information that's for your contribution