Has anyone tried this? I got it tonight and am having a hell of a time. I installed Gummy on slot 1 and 2 and everytime I boot to it I loop at the Google screen and have to while and restore through recovery. It worked once but I ****ed it up with a mod now nothing works. I've factory reset and deleted both slots.
Any ideas?
Sent from my Transformer Prime TF201 using xda premium
Hi,
I have no problems with it. My PhoneRom is CM9 and Slot1 is MIUI. Have you tried it with another Rom?
Gesendet von meinem Galaxy Nexus mit Tapatalk
I too have not had any problems. I have MIUI on ROM 1, Codname ANdroid on slot 2, and CM9 on ROM 3 with Wookie as my stock ROM. No problems, can easily switch between them. GO to your SD card, find the bootmanager folder, and delete the folders for the ROM's - maybe something was bad in the slots.
I checked the bootmanager folder after i whiped the slots out and all was left was a empty android.secure folder.
I'm going to try some other ROMs today, it just doesnt make sense that Gummy does this now after it worked fine the first time =\
What version of recovery are you guys using? I downloaded another ROM And tried using Boot Manager but got the same issue. I decided it must be my actual phone rom, so i tried to whipe and install Gummy, but it threw an error related to my version of CWM. I upgraded and am trying now with Gummy as my primary ROM
Upgrading my CWM seemed to work.
Anyone know how to sync texts between slots?
I selected the slots but the messages didnt take
Can't get the syncing messages or call log to work either. It's also not allowing me to flash kernals on slotted roms.
DroidHam said:
What version of recovery are you guys using? I downloaded another ROM And tried using Boot Manager but got the same issue. I decided it must be my actual phone rom, so i tried to whipe and install Gummy, but it threw an error related to my version of CWM. I upgraded and am trying now with Gummy as my primary ROM
Click to expand...
Click to collapse
I too ran int osome issues, then i realized that i am running AOKP milestone 6 and was trying o put a JB rom on slot 1.. Both ROMs have to run off the same kernel. So if you have ICS as your main ROM then you must use an ICS rom for your slots. I dont know if this helps any1, but now I am runing smooth
I am new with nexus.is boot manager work with this phone?
Sent from my GT-I9300 using Tapatalk 2
Related
Every time I try a custom cm10 Rom or even the new preview of aokp when I flash gaps when I reboot it just reboot back into recovery. I have tried flashing right after flashing the Rom, I have tried flashing Rom first then reboot into Rom then back into recovery, I have tried wiping cache, nothing every time I flash gaps I can't get back into the Rom
Sent from my Galaxy Nexus using Tapatalk 2
yes its not working on these roms i've tried: CM10, AOKP, Bugless Beast ...
blowtorch said:
yes its not working on these roms i've tried: CM10, AOKP, Bugless Beast ...
Click to expand...
Click to collapse
Are you getting the same error where it just reboot into recovery
Sent from my Galaxy Nexus using Tapatalk 2
dislplin01 said:
Every time I try a custom cm10 Rom or even the new preview of aokp when I flash gaps when I reboot it just reboot back into recovery. I have tried flashing right after flashing the Rom, I have tried flashing Rom first then reboot into Rom then back into recovery, I have tried wiping cache, nothing every time I flash gaps I can't get back into the Rom
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
are you using the right gapps? have you tried redownloading them at all?
dislplin01 said:
Every time I try a custom cm10 Rom or even the new preview of aokp when I flash gaps when I reboot it just reboot back into recovery. I have tried flashing right after flashing the Rom, I have tried flashing Rom first then reboot into Rom then back into recovery, I have tried wiping cache, nothing every time I flash gaps I can't get back into the Rom
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Try a full wipe?
simms22 said:
are you using the right gapps? have you tried redownloading them at all?
Click to expand...
Click to collapse
3bananas said:
Try a full wipe?
Click to expand...
Click to collapse
Yea I have the correct gapps and have tried a full wipe I don't understand I downloaded the gapps from aokp post in Google± still same thing on any jelly bean Rom
Sent from my Galaxy Nexus using Tapatalk 2
I'm thinking it's the recovery I'm using clock work mod 6.0.0.1 touch I will update later and try it out let you guys know
Sent from my Galaxy Nexus using Tapatalk 2
derp nvm
I'm having the same problem with TeamEOS ROM. I tried everything above too. I'm using ClockworkMod 6.0.1.0.
I'm having the same issue.
Whenever I flash a ROM without Gapps bundled, then flash the Gapps package, I just boot back into CWM. I tried the two Gapps packages for Jellybean I could find, neither worked. Another issue I found is if I flash some modded Gapps packages (such as the one for the Team Bamf JB ROM or others) I can boot, but the apps aren't installed, and some functions might actually be missing after the flash.
I tried this with both JB ROMS and ICS ROMS, same story with both.
Another interesting thing, when I try to flash the MrMaddon Galaxy SIII Add-On pack, it installs the TW5 launcher, it themes everything, but none of the sounds, apps, or widgets are installed. This is for both the JB Light version, and the full version for ICS.
Flash a ROM with the Gapps already installed, everything is fine and dandy. I really want to use Paranoid Android, and the other amazing ROMs available for my GNex, but I don't want to have to do without Google Now and Google Voice. I've grown partial to them lol.
Hi guys I searched the forums but can't seem to figure this one out. I can flash and boot all ICS Roms completely fine. When I try ANY Jellybean ROM AOKP, CM whatever I get stuck on a boot screen loop. I use these steps:
Flash darkside super wipe
Flash ROM
Flash gapps
Flash darkside super wipe cache
Reboot
Now I've tried cwm 5.x.x and 6.x.x and twrp. Any suggestions?
MARINERMOOSE241 said:
Hi guys I searched the forums but can't seem to figure this one out. I can flash and boot all ICS Roms completely fine. When I try ANY Jellybean ROM AOKP, CM whatever I get stuck on a boot screen loop. I use these steps:
Flash darkside super wipe
Flash ROM
Flash gapps
Flash darkside super wipe cache
Reboot
Now I've tried cwm 5.x.x and 6.x.x and twrp. Any suggestions?
Click to expand...
Click to collapse
Download the file again. Sounds like a bad flash.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Thanks elesbb but this bootloop happens with ANY JB from I try to.flash on my hercules. So I don't think its bad downloads I wonder if I posted a log at during boot if someone could help.
MARINERMOOSE241 said:
Thanks elesbb but this bootloop happens with ANY JB from I try to.flash on my hercules. So I don't think its bad downloads I wonder if I posted a log at during boot if someone could help.
Click to expand...
Click to collapse
That's why I recommended downloading again. Sometimes packets are lost in cyberspace. I don't see how your device is the only one doing this. Gotta be something on your end. (Not trying to point fingers. Just saying it can be a million and 2 things )
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Ok, I now downloaded 4 different roms ALL Jellybean and ALL get frozen during the bootscreen and bootloop. ADB just sits at waiting for device when trying to logcat. I've reflashed to stock gingerbread just fine, reflashed to ICS AOKP just fine no loops. But going to JB after just keep causing a bootloop, its driving me crazy.
MARINERMOOSE241 said:
Ok, I now downloaded 4 different roms ALL Jellybean and ALL get frozen during the bootscreen and bootloop. ADB just sits at waiting for device when trying to logcat. I've reflashed to stock gingerbread just fine, reflashed to ICS AOKP just fine no loops. But going to JB after just keep causing a bootloop, its driving me crazy.
Click to expand...
Click to collapse
What cwm are u using? I couldn't flash any Jb roms with cwm 6
Sent from my SAMSUNG-SGH-T989 using xda premium
Rememdium said:
What cwm are u using? I couldn't flash any Jb roms with cwm 6
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Were you getting freeze bootloops?
I have tried cwm 5.x nd 6 which I'm on now. Also twrp gave me the same loop. I've even gone as far.as.formatting sdcard and eemc with no luck.
MARINERMOOSE241 said:
Were you getting freeze bootloops?
I have tried cwm 5.x nd 6 which I'm on now. Also twrp gave me the same loop. I've even gone as far.as.formatting sdcard and eemc with no luck.
Click to expand...
Click to collapse
Try switching to TWRP.
Then re-download the JB rom you want to use, put it on the root of your internal SD, make sure the MD5 matches and then try flashing again. I think most of these JB boot problems are coming from CWM recoveries.
Digital1325 said:
Try switching to TWRP.
Then re-download the JB rom you want to use, put it on the root of your internal SD, make sure the MD5 matches and then try flashing again. I think most of these JB boot problems are coming from CWM recoveries.
Click to expand...
Click to collapse
No they aren't. Teamchopsticks recommends cwm 6.0.1.1 as the optimal recovery to use.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
elesbb said:
Teamchopsticks recommends cwm 6.0.1.1 as the optimal recovery to use.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Where did you read that? And does 6.0.1.1 still have a broken cache wipe?
Someone had a similar problem in the dev thread and switching recoveries seemed to fix it. So worth trying.
Sent from a BAMF Jedi ROM from the Lightside
Digital1325 said:
Where did you read that? And does 6.0.1.1 still have a broken cache wipe?
Someone had a similar problem in the dev thread and switching recoveries seemed to fix it. So worth trying.
Sent from a BAMF Jedi ROM from the Lightside
Click to expand...
Click to collapse
I read it on their website but i came across it in binarybishops nightly thread. And no the cache wipe is fixed. I use the touch version, tried TWRP and CWM 5 hell i tried them all! They all produced the exact same results for me as far as performance goes. But ive never had any issues with 6.0.1.1 i love it to death
Ok guys this is very puzzling. I have been flashing roms for years and have never had a loop like this.
So I flashed TWRP again verified the md5 has was correct for both AOKP JB nightly and gapps. Flashed following the correct steps posted in the thread by Whitehawkx and I still get a bootloop freeze on the AOKP unicorn. So I tried CM 10 nightly... same freeze/loop. I downloaded AOKP ICS, no loop at all boots fine.
I've tried cwm 5, 6, and twrp all with the exact same results. I have formated SD external and internal EMMC... nothing has worked.... All I want is some Jelly bean goodness.... I flashed AOKP on my nexus 7 just fine. Like I said I am really stumped on this one as to why ICS roms would flash perfectly fine and using the same steps JB roms bootloop.
MARINERMOOSE241 said:
Ok guys this is very puzzling. I have been flashing roms for years and have never had a loop like this.
So I flashed TWRP again verified the md5 has was correct for both AOKP JB nightly and gapps. Flashed following the correct steps posted in the thread by Whitehawkx and I still get a bootloop freeze on the AOKP unicorn. So I tried CM 10 nightly... same freeze/loop. I downloaded AOKP ICS, no loop at all boots fine.
I've tried cwm 5, 6, and twrp all with the exact same results. I have formated SD external and internal EMMC... nothing has worked.... All I want is some Jelly bean goodness.... I flashed AOKP on my nexus 7 just fine. Like I said I am really stumped on this one as to why ICS roms would flash perfectly fine and using the same steps JB roms bootloop.
Click to expand...
Click to collapse
It's something wrong with your flash file. Use an actual adapter to transfer the file. And download it again. Then if you still get the loop plug your phone into your computer and boot it up then run adb logcat.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
elesbb said:
It's something wrong with your flash file. Use an actual adapter to transfer the file. And download it again. Then if you still get the loop plug your phone into your computer and boot it up then run adb logcat.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
When you say flash file do you mean the ROM? If so I've tried downloading it on my Mac and transferred it via USB mode still no dice. Also I.tried to.log at during the bootloop but adb never sees the device.
MARINERMOOSE241 said:
When you say flash file do you mean the ROM? If so I've tried downloading it on my Mac and transferred it via USB mode still no dice. Also I.tried to.log at during the bootloop but adb never sees the device.
Click to expand...
Click to collapse
Yes im saying the zip. Something isnt getting placed where it belongs or something is corrupt. And DONT use the USB mode, get an actual Mirco SD to SD adapter and a SD to USB adapter and do it that way.
elesbb said:
Yes im saying the zip. Something isnt getting placed where it belongs or something is corrupt. And DONT use the USB mode, get an actual Mirco SD to SD adapter and a SD to USB adapter and do it that way.
Click to expand...
Click to collapse
I have an adapter so I can try that right now. However, if the md5 hash is correct wouldn't that mean the zip downloaded correctly? And it still doesn't answer why every JB from bootloops while ICS does not.
MARINERMOOSE241 said:
I have an adapter so I can try that right now. However, if the md5 hash is correct wouldn't that mean the zip downloaded correctly? And it still doesn't answer why every JB from bootloops while ICS does not.
Click to expand...
Click to collapse
Yes that is usually the norm. But it is millions and millions and millions of bits of data we are talking about here... all it takes is for one of those bits to either not be there or be in the wrong place to screw it up. And yes that is extremely strange, but seeing as you are the only one experiencing this, i am sure its not the ROMs and its something you are doing or not doing. Im not trying to be rude or imply that you are dumb. its just extremely hard to pin point something weird like this when i dont have the device in my hands. See where im getting here?
elesbb said:
Yes that is usually the norm. But it is millions and millions and millions of bits of data we are talking about here... all it takes is for one of those bits to either not be there or be in the wrong place to screw it up. And yes that is extremely strange, but seeing as you are the only one experiencing this, i am sure its not the ROMs and its something you are doing or not doing. Im not trying to be rude or imply that you are dumb. its just extremely hard to pin point something weird like this when i dont have the device in my hands. See where im getting here?
Click to expand...
Click to collapse
I totally agree I don't believe its the roms themselves as they seem to work for most people. I've just never ran across this before.
MARINERMOOSE241 said:
I totally agree I don't believe its the roms themselves as they seem to work for most people. I've just never ran across this before.
Click to expand...
Click to collapse
I have on my HD2. But a complete format of the memory card using HP USB disk tools fixed it. Have you tried that yet?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
elesbb said:
I have on my HD2. But a complete format of the memory card using HP USB disk tools fixed it. Have you tried that yet?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Formated the SD card ... used the external adapter to copy the flash to the SD same bootloop I also copied the file directly to internal storage removed the sd card and flashed same result... looks like no Jelly bean for me... so freaking odd as I can flash ICS any rom all day long just fine.
I've flashed other Android phones in the past so I'm not a complete noob but for some reason I cant go from AOKP to Paranoid. I've reflashed the a stock rom and did everything from scratch a few times now. Am i missing something? When in CW it just gives me an error when installing. The only rom that installs properly is the AOKP rom which happens to be the first Rom I've tried out since I had the Paranoidandroid rom on my Note. I've wiped cache, Devlick cache and factory wipe/restore. I honestly cant think of anything else after flashing back to stock and after trying the CM10 nightlys and MIUI roms i get the same errors. I've downloaded the roms straight from sites to my phone and from the computer. I've store to an internal sd card and the external sd card. Someone please tell me where I'm screwing up and why only AOKP works. I like the rom i just miss my Touchwiz!
WOW I'm retarded. Fixed
What kind of error are you getting in CWM? (i.e. what does the error message say?)
Edit: My timing... so you solved your own issue? What were you doing?
Id say using an old version of cwm
Sent from my SAMSUNG-SGH-I747 using xda premium
Hey guys, I'm really new to rooting, flashing roms, and Android in general (I've used iOS since 2007 until a month ago... please have mercy on my soul). I have an AT&T GN2 that I would like to remove the bloatware from, hence why I began investigating rooting, but it's snowballed into my desire to try out some of the amazing ROMs that the developers here have produced. Since the Note 2 uses the Exynos 4, I rooted using the ExynosAbuse exploit and downloaded Titanium Backup to freeze the AT&T apps. So far, so good.
However, I am wanting to get into how to flash custom ROMs, like CyanogenMod, so I downloaded the CWM RomManager and flashed the CWM Recovery. I downloaded the CyanogenMod 10.1 release for the i317 model (here: http://forum.xda-developers.com/showthread.php?t=2024495) and the latest gApps package (for 4.2.1), and flashed both from CWM RomManager. When it rebooted, it showed the CyanogenMod boot screen, but it appears to be stuck there. I'm not sure what to do at this point, and am hoping I didn't brick my phone. Is there anything I can do at this point?
Use the three button combo to get into recovery, should be volume up, home, and power, and then wipe data or install a stock rooted ROM. That should help get you to a bootable stage.
Sent from my GT-N7105 using xda premium
Have you changed kernel???
Sent from my MT11i using xda app-developers app
id10terrordfw said:
Use the three button combo to get into recovery, should be volume up, home, and power, and then wipe data or install a stock rooted ROM. That should help get you to a bootable stage.
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
When I booted into recovery, I got the CWM recovery (which is a good thing, I suppose). I wiped the cache, and then installed the CM 10.1 zip and gApps zip. However, I think I still need to wipe data/factory reset, right?
So, at this point, I've:
1. Rooted the device using Chainfire's ExynosAbuse apk (super easy).
2. Installed RootChecker (success) and TI backup (froze bloatware apps).
3. Downloaded CWM RomManager.
4. Flashed CWM Recovery.
5. Downloaded CM 10.1 port for i317 (the AT&T GN2 model) and the 4.2.1 gApps zips.
6. Chose to install ROM from SD card in RomManager, added both CM 10.1 and gApps, and only selected install (did not wipe cache or user data at this point).
7. Received blue CyanogenMod boot screen... excited... but it remains on the boot screen. Sad face.
8. Removed battery to power the device off, placed battery back in, and then booted into recovery mode (CWM recovery).
9. Installed the CM 10.1 zip and gApps zip from SD, then wiped cache.
10. ???
Wipe data factory reset. Wipe cache/dalvik. Flash cm, flash gapps. Reboot
And dont use rom manager. Do it in recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Peleus16 said:
Have you changed kernel???
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
This is a great point, at no point op has mentioned kernel.
Sent from my SAMSUNG-SGH-I317 using xda premium
cdshepherd said:
Wipe data factory reset. Wipe cache/dalvik. Flash cm, flash gapps. Reboot
And dont use rom manager. Do it in recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Okay, booted into CMW recovery and performed all in that order. It booted! Hurrah. Only problem: the AOSP keyboard crashes constantly, making text input not possible. Sigh...
NowhereOutThere said:
Okay, booted into CMW recovery and performed all in that order. It booted! Hurrah. Only problem: the AOSP keyboard crashes constantly, making text input not possible. Sigh...
Click to expand...
Click to collapse
Boot back into recovery and fix permissions. That may help
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Boot back into recovery and fix permissions. That may help
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Okay, I booted into recovery mode and fixed permissions... the keyboard still crashes, which means I can't type anything. Do I have to do anything with the kernel? I didn't wipe the dalvik cache, should I have done that?
EDIT: wiped dalvik cache, didn't do anything... apparently, this was a fine release so I'm not sure what could be causing the keyboard issues.
NowhereOutThere said:
Okay, I booted into recovery mode and fixed permissions... the keyboard still crashes, which means I can't type anything. Do I have to do anything with the kernel? I didn't wipe the dalvik cache, should I have done that?
EDIT: wiped dalvik cache, didn't do anything... apparently, this was a fine release so I'm not sure what could be causing the keyboard issues.
Click to expand...
Click to collapse
Im not exactly sure either. I have yet to flash cm. Read the cm thread?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Im not exactly sure either. I have yet to flash cm. Read the cm thread?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
So what ROM are you using? I just picked cyanogenmod because I've heard of it before, but I would like something that works. Is there a way to add another ROM onto the phone's storage, as I don't have an SD card... And since I can't type anything, it's not like I can download it from the phone's browser?
NowhereOutThere said:
So what ROM are you using? I just picked cyanogenmod because I've heard of it before, but I would like something that works. Is there a way to add another ROM onto the phone's storage, as I don't have an SD card... And since I can't type anything, it's not like I can download it from the phone's browser?
Click to expand...
Click to collapse
Plug it into your computer and see if you can mount your internal sd. If you can download a new rom to your computer and transfer it to sd. Did you make a backup before flashing?
Im just running stock rooted for now.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Well, I'm downloading CleanROM right now. I also downloaded another cm 10.1 file just in case, perhaps it's because I downloaded it on the mobile Chrome browser that I'm having problems? I also downloaded a kernel from the thread to help with performance. However, if I can't get these on the phone, it doesn't matter. Since I'm on a Mac, I have to use Android File Transfer, and it isn't registering my phone, unfortunately. I may have to go out and buy a cheap SD card and throw the files on there. It may not hurt to have one around, anyways.
Text yourself the download link to CleanRom. :thumbup:
And chrome shouldnt have made a difference. I take it you didnt make a nandroid backup before you flashed cm?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Text yourself the download link to CleanRom. :thumbup:
And chrome shouldnt have made a difference. I take it you didnt make a nandroid backup before you flashed cm?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
No... I thought that a backup of the original ROM was made when flashing CWM recovery, but I am a noob and that did not happen. Unfortunately, the browser doesn't even work! So I cannot text myself the link for the download. I should be able to flash a zip file from a micro sdhc, right?
Flash the right GAPPS, the crashing keyboard is a symptom of incorrect GAPPS. The December one is for 4.2.1 only, which is what CM10.1 is based on. Make sure you flash the right GAPPS with the right CM version.
Sent from my GT-N7105 using xda premium
The CM you linked in the OP is CM10 not 10.1, so you flashed the wrong GAPPs
ManelScout4Life said:
The CM you linked in the OP is CM10 not 10.1, so you flashed the wrong GAPPs
Click to expand...
Click to collapse
Oh... crap. Is there any way I can get the correct gApps on my phone? Ugh... I'm going to have access to a Windows machine today, so I can download the correct GAPPS and put them on my flash drive. I can still put it in USB debugging mode, but will the PC recognize it? Android File Transfer software for Mac does not recognize the phone any more, so I'm a bit limited in what I can do. Unless, like I said before, I can just pop in an SD card with the correct file.
Just grab goo manager from the market and dl the correct gapps to your phone. Either that or use your phones browser. No need for a pc. Boot in recovery, wipe cache and dalvik and flash correct gapps. Should be gtg.
Edit: just saw your browser isn't working. Goo manager's your best bet. Could always try another browser from the market as well. Good luck.
NowhereOutThere said:
Oh... crap. Is there any way I can get the correct gApps on my phone? Ugh... I'm going to have access to a Windows machine today, so I can download the correct GAPPS and put them on my flash drive. I can still put it in USB debugging mode, but will the PC recognize it? Android File Transfer software for Mac does not recognize the phone any more, so I'm a bit limited in what I can do. Unless, like I said before, I can just pop in an SD card with the correct file.
Click to expand...
Click to collapse
While in recovery plug usb into computer (make sure drivers are installed) in recovery menu navigate to mount usb storage. See if that works
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
I was using the latest alpha of CM11, then i i wanted to get back to CM10.2, i did all i had to do (wipes, and stuff) and when starting up, the phone frezees and keep on doing this...
I also have searched about this issue and found no answer.
tpag02 said:
I was using the latest alpha of CM11, then i i wanted to get back to CM10.2, i did all i had to do (wipes, and stuff) and when starting up, the phone frezees and keep on doing this...
I also have searched about this issue and found no answer.
Click to expand...
Click to collapse
Have you tried booting to recovery, then doing an advanced wipe (system/data/cache/dalvik) and reflashing rom/gapps?
What version of recovery are you using?
Almite said:
Have you tried booting to recovery, then doing an advanced wipe (system/data/cache/dalvik) and reflashing rom/gapps?
What version of recovery are you using?
Click to expand...
Click to collapse
yes, i have. I also got back to stock, used an older recover, flashed with an older version of CM and nothing. I first was using CWM 6.0.3.7., after that I used 6.0.4.3, then an older version of TWRP but nothing. I also tried booting to system without flashing gapps.
With stock ROM everything works just fine.
Just wipeout internal and external card once and than install with twrp 2.6.1.0. And don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app
iamdofus said:
Just wipeout internal and external card once and than install with twrp 2.6.1.0. And don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Well, thank you, but it didn´t work.
it happened to me the same thing months ago. never had solution. still in waiting. attempt internal and external SD format. and followed the same. I hope someday they can come up with the solution! : (
i have the same problem too
I try to install multiple ROM 4.2.2 and I could only install one version AOKP Milstone JB1. I also worked the other. however all 4.1.2 rom if I worked. I could not install any 4.3 and 4.4 now does not know what is the problem but I've tried everything! anyone found the solution yet but I see I'm not the only one! (excuse my bad English, not my language )
Well you all are right, I am also using shadow mastery (stock rooted rom). Just because I had the same problem sometimes stucking and rebooting and sometimes after going in gallery. Even I can't use 4.3 and 4.4 roms. Anyone have to contact with room developer or someone who know about this problem.
Sent from my SGH-T989 using xda premium
You might want to find an Official T-Mobile or Telus 4.1.2 or 4.0.3/4.0.4 rom that is Odin flashable, not one that has been custom made/flashable from recovery - then just start over after getting back to true stock, change to TWRP or CWM recovery that is 4.3+ compatiable, root and then flash rom/gapps etc.