Hello all, long time lurker here. I got the Trident Aegis case in the mail today and thought I'd compare it to a couple other popular cases out there. I've had the Ballistic SG on my phone for a week or so, so far I'm liking the Aegis!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Size
The first thing I noticed when I took the Ballistic off and slipped the Aegis on is that it feels quite a lot thinner and less bulky. It seems like its right in between the Ballistic and the TPU case for thickness, I tried my best to show that in the pictures.
Protection
The Ballistic is definitely more rugged than the Trident. The silicon is thicker everywhere, the hard layer is thicker, the corners are reinforced, and the ridge around the screen comes farther in and is deeper. While the Ballistic case was on I actually got in the habit of lightly bouncing my phone on the desk to keep my hands busy. I had no doubt that the phone would be fine.
The Aegis is way better than no case at all I'm sure but it's not the same as the Ballistic. If you want protection for frequent drops, go Ballistic. If you want to keep a thinner profile and still have some protection, go for the Aegis. Personally, I'm pretty careful with my stuff, so I'm perfectly happy with the Aegis.
Usability
I feel like I had a better grip on the phone while using the Ballistic case. The corner bumpers not only protect from drops, but also give a nice place for my index and pinky fingers to rest.
The silicon on the Ballistic is stickier, which is great for grip, but horrible for dust and pockets. Getting the Ballistic in and out of my pocket was a pain. Even in a large coat pocket, I always had to jiggle it a little to rip it free. Both the silicon and the hard plastic on the Aegis are smoother. I have no troubles pocketing the Aegis.
Note: The deep bezel on the Ballistic case makes touching the right edge of the screen with my right thumb while holding it in my right hand difficult. I often had to re-swype words that used "P", "O", or "L," with a conscious effort to push all the way to the edge of the screen. Not un-usable, but the issue is non-existent with the Aegis.
Conclusion/TLDR
The Ballistic SG and the Trident Aegis are both great cases. The Ballistic is perfect for people that want a lot of protection and don't mind a little bulk. The Trident is a good compromise for the people that want to keep their phone thin.
Edit: got a few posts, added the images!
I have a Ballistic SG case coming later this week. I was looking for something that will hold up to my immense amount of clumsiness and bad luck, looks like I made a good choice.
globalninja said:
I have a Ballistic SG case coming later this week. I was looking for something that will hold up to my immense amount of clumsiness and bad luck, looks like I made a good choice.
Click to expand...
Click to collapse
Yup looks like you did. Another good choice is the tough case by case mate. Its about the size of the Trident case
Sent from my SPH-D710 using xda premium
I got my case today. Its great, i'm not worried about dropping my phone
Sent from my SPH-D710 using Tapatalk
I picked up the trident today. Nice case
Sent from my SPH-D710 using xda premium
Nice review and helpful comparison pics.
I'm loving the Ballistic, but like the Ballistic HC case I used on my Evo, it's extreme overkill for running and the office. I''d still use it most of the time but it's difficult to get in and out of my pocket.
So I've got an Aegis in the mail. It will likely replace the TPU and silicone cases I currently rotate between. I have the same two-tone TPU case in your photos, but in clear. Best case for the money.
Nice review, I own a Ballistic case and have often found myself bouncing it on tables when bored...LOL
I've had the Trident case for a few days now, the screen is much less recessed and easy to use with one hand compared to the Ballistic SC. My only complaint is that the smooth plastic shell could be slightly grippier. Much easier to get in and out of pockets than the SC, and great thickness for the protection offered. The buttons are prominent and easy to press, and the port covers look durable.
This is the last case I will buy for my phone. I recommend it!
thanks for this review... im currently using the TPU case and never heard about the others... i might have to check out the Aegis. Thanks for the review. Appreciated it
Ordered the Trident Aegis, Red and Black, will be here tomorrow!!! Thanks for the review and comments really helped in my decision!!!
Sent from my SPH-D710 using XDA App
I couldn't be happier with my Ballistic SG-- as a runner who uses his device as a music player (and person with a clumsy side now and then) when I purchased the Epic Touch in early December the most important decision I had to make was which case is durable enough to survive the occasional drop, had an easy to hold form factor and included access to all ports/keys (headphone jack & volume buttons were most important). I did my research and after seeing the video on the Ballistic site, made my decision and am completely satisfied with it. It's all about what keeps your device safe and meets your specific needs.
Thanks the pics are really helpful
FitChicago said:
I couldn't be happier with my Ballistic SG-- as a runner who uses his device as a music player
Click to expand...
Click to collapse
Glad I'm not the only person lugging this behemoth around on runs! I like to use Endomondo to record runs and bike rides, so it's my music player too.
i got the trident aegis today and while this is my favorite for the e4gt so far, the clear screen protector they supply with it is not very good. it has a rainbow effect on it (kind of like a glare) and i didnt quite get it on right without any bubbles.. (there are some specks of dust creating air bubbles too. so i'm going to remove it.
can anyone suggest a quality screen protector for our phone?
cuezaireekaa said:
i got the trident aegis today and while this is my favorite for the e4gt so far, the clear screen protector they supply with it is not very good. it has a rainbow effect on it (kind of like a glare) and i didnt quite get it on right without any bubbles.. (there are some specks of dust creating air bubbles too. so i'm going to remove it.
can anyone suggest a quality screen protector for our phone?
Click to expand...
Click to collapse
I just got My Aegis and yeah the screen protector suck. Love the case. I was thinking of getting this one. I like the way its cut out and its flexible like the zagg invisible shield. Any body got one of these?
http://www.ebay.com/itm/Samsung-Gal...ccessories&hash=item5ae50c3eb7#ht_3964wt_1163
Im really impressed with the trident aegis case. I work at home depot and my co-worker dared me to toss the phone down a aisle. So threw like a bowling ball so it bounced on the corners and it was perfectly fine (only went half way down the aisle). I even had a plastic piece sitting in between the phone and the trident symbol just enough to grip surfaces because the case slides to easy as its designed to curve with the phone on the hard plastic part of the case.
mexiking713 said:
I just got My Aegis and yeah the screen protector suck. Love the case. I was thinking of getting this one. I like the way its cut out and its flexible like the zagg invisible shield. Any body got one of these?
http://www.ebay.com/itm/Samsung-Gal...ccessories&hash=item5ae50c3eb7#ht_3964wt_1163
Click to expand...
Click to collapse
that one looks pretty good and not too expensive either. i just wonder if it is 'tacky' like the zagg. i didnt like the sticky feeling of that protector. i'll wait to see if anyone has this and if its any good. if you do get it, please post your thoughts.
---------- Post added at 06:26 PM ---------- Previous post was at 06:03 PM ----------
kyhassen said:
Im really impressed with the trident aegis case. I work at home depot and my co-worker dared me to toss the phone down a aisle. So threw like a bowling ball so it bounced on the corners and it was perfectly fine (only went half way down the aisle). I even had a plastic piece sitting in between the phone and the trident symbol just enough to grip surfaces because the case slides to easy as its designed to curve with the phone on the hard plastic part of the case.
Click to expand...
Click to collapse
great tip about putting something between the phone and the trident symbol. now my phone doesnt slide away!
wow, threw it down the aisle huh!? im too faint hearted for somethin like that.
cuezaireekaa said:
great tip about putting something between the phone and the trident symbol. now my phone doesnt slide away!
wow, threw it down the aisle huh!? im too faint hearted for somethin like that.
Click to expand...
Click to collapse
It is a great tip, I actually got it from someone else on this site, who also tried to sell some junk too... :-/
I have protection plan on it anyway so i'm not too worried about it breaking as i'm a klutz anyway and have dropped it several times with the case on already. Plus i had to test it out.
I also went with the Trident Aegis. I checked out the ballistic and didn't care for the larger corners and loose rubber feel. also, the protectors on the Aegis (usb & headset) were a plus for me. The Aegis also gives the phone/screen a wider & flatter appearance...which I like. several friends who have the ballistic prefer my Aegis after actually handling it.
Both are nice, but the Aegis is top for me. got mine on ebay, about $22~
I am looking at both of these. I like to wear my phone on my hip. What pouch/case/holster will fit this phone with the case on it?
Related
Hey everyone, I received my TPU case from EBay (item 290530353216) today, here are some comments and pics. The fit is only OK - the cutout for the USB/HDMI ports is a little off, and there is a little bit of an edge around the power button that impedes fingerprint swipability a little. I will say too that I didn't expect it to have the goofy pattern - what is it with TPU cases and argyle patterns?? Also, as you've noticed it is somewhat translucent.
I give it a 3/5. $7 shipped in the US. I'll keep it until another inexpensive case rolls around that is higher quality.
And just in case anyone wonders, on my screen are the Pandora Widget, Android Agenda Widget, and some apps. I am running ADW Launcher (free). Also, I know I left my back panel sticker on there, and that was on purpose.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah seriously with the frikin argyle ****! Its like they made a billion sheets of the argyle TPU and they just like heat mold them to phones (not like thats how they're made). This will be my third phone encased in argyle TPU. Other two were the dark one like yours, this time I got sick of trying to hide the argyle and people asking about the stupid pattern. I got clear so, "yes its frikin argyle! got a problem!?"
Waiting for the Realook screen protectors to be cut. no idea why it takes them so long to cut the right size. Realooks are by far the best screens...
Everything is temporary at this point...I'll buy nicer stuff once my 30 days are up.
I was fortunate enough to have a solid black non-patterned TPU case for my EVO that someone on this forum actually commissioned and was selling out of their garage essentially.
Check out tpu-cases.com. I bought an all black one there, shipped same day. Quality is nice, it's glossy, feels good in the hand for an 8$ case.
the 1.99 one I got from ebay is decent
Nice, never seen that site before. I'll order one up and hopefully it'll get here by the time I'm home from travel. Wish someone would make one like I had for my Evo though - it was matte on the back and shiny on the front.
daveop said:
Check out tpu-cases.com. I bought an all black one there, shipped same day. Quality is nice, it's glossy, feels good in the hand for an 8$ case.
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
Well I tried the Speck (or whatever it's called) case from AT&T and hated it...looked and felt like a toy.
Then I tried the Otterbox Impact (the smallest case they make). It's made of a type of rubber that sucks up all dust and won't let it go. It's pure black rubber but after putting it in my pocket and driving up to Starbucks to meet some friends...it looked gray. My pockets don't have any lint or anything in them...and yet the case now looks completely gray. I just put it on yesterday. It's also a bit big for my tastes...and the phone can easily come out of the bottom.
I'm going to try the cheapest cases on eBay. They always worked great for my Nexus 1 and most other phones I've used. The cheap thin rubber is fantastic for me. The phone's so freaking sexy...I just don't want to add a bunch of mass to it.
hotleadsingerguy said:
Well I tried the Speck (or whatever it's called) case from AT&T and hated it...looked and felt like a toy.
Then I tried the Otterbox Impact (the smallest case they make). It's made of a type of rubber that sucks up all dust and won't let it go. It's pure black rubber but after putting it in my pocket and driving up to Starbucks to meet some friends...it looked gray. My pockets don't have any lint or anything in them...and yet the case now looks completely gray. I just put it on yesterday. It's also a bit big for my tastes...and the phone can easily come out of the bottom.
I'm going to try the cheapest cases on eBay. They always worked great for my Nexus 1 and most other phones I've used. The cheap thin rubber is fantastic for me. The phone's so freaking sexy...I just don't want to add a bunch of mass to it.
Click to expand...
Click to collapse
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Fixter said:
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Click to expand...
Click to collapse
i like the feather as well. not much in terms of impact protection, but most of my scratches come from the phone vibrating on the desk over time and scuffing the battery door, so its a nice line of defense against that. also, its a little less slippery than the standard battery door which i like
domin8 said:
i like the feather as well. not much in terms of impact protection, but most of my scratches come from the phone vibrating on the desk over time and scuffing the battery door, so its a nice line of defense against that. also, its a little less slippery than the standard battery door which i like
Click to expand...
Click to collapse
Yeah its great for worrying less about the normal wear and tear.
I particular like the argyle tpu cases which give decent protection and feel. i have it for the ipad, galaxy tab, atrix, inspire, and xoom.
www.degasis.net offers these as well
I ordered my case from http://www.degasis.net/models/atrix.html (as the poster above recommended. $6.98 shipped
This is the best fitting TPU case I've had across all my devices. The best part is that it actually makes the on/off button easier to push and the finger scanner easier to operate (its cut at the perfect angle to compliment it). Its slightly different cut but a better fit than the pictures posted above.
I'll post pictures when I come across another camera some time today or tomorrow.
TPU is far superior to any other case material in my book. perfect balance of grip/non-stick, thinness, protection, and fit.
eatkabab said:
I ordered my case from http://www.degasis.net/models/atrix.html (as the poster above recommended. $6.98 shipped
TPU is far superior to any other case material in my book. perfect balance of grip/non-stick, thinness, protection, and fit.
Click to expand...
Click to collapse
looks exactly like the case i got from ebay for $1.99 lol
Incipio protection?
Fixter said:
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Click to expand...
Click to collapse
I really like the look and feel of the Incipio low profile cases. Do you feel like it would do any good if you dropped the phone?
grayfoxx said:
I really like the look and feel of the Incipio low profile cases. Do you feel like it would do any good if you dropped the phone?
Click to expand...
Click to collapse
That's the problem I have with the feather - it doesn't protect either end of the device, only the sides and back.
Judging by the picture, it looks like you have that "textured" screen protector. What is the screen protector you are using? Those are my favorite kinds and I have been trying to find one for a while! thanks in advance
Kbc, who are you asking? I'm using an AT&T screen protector. It's matte and perfectly smooth.
kbc88 said:
Judging by the picture, it looks like you have that "textured" screen protector. What is the screen protector you are using? Those are my favorite kinds and I have been trying to find one for a while! thanks in advance
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
phobos512 said:
Nice, never seen that site before. I'll order one up and hopefully it'll get here by the time I'm home from travel. Wish someone would make one like I had for my Evo though - it was matte on the back and shiny on the front.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Sounds similar to the one i had on my desire but I cant find it anywhere now
eatkabab said:
This is the best fitting TPU case I've had across all my devices. The best part is that it actually makes the on/off button easier to push and the finger scanner easier to operate (its cut at the perfect angle to compliment it). Its slightly different cut but a better fit than the pictures posted above.
Click to expand...
Click to collapse
OK, you've sold me on this case Good description of how it is, what colour did you get?
Came across these by accident. I LOVE THEM! I was looking at the cases available for the Infuse, and found this odd brand by the name of Ballistic making a case for it. I became jealous and Googled them. Google took me to their website which I discovered, OUR PHONE is supported!
Here's the link (they are $35 & $50 for the one on the right): http://www.goballisticcase.com/products/motorola-atrix-ballistic-sg-series-case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are great if you have a UHaul to carry your phone around in after you have encased it in this thing!
The second one from the right...
It looks like it would suck to wake the phone up or use the fingerprint sensor.
And taking this on a plane TSA would think it's a bomb
Mgamerz said:
And taking this on a plane TSA would think it's a bomb
Click to expand...
Click to collapse
Wait!............You haven't seen the commercial???.............It's a phone that acts like a laptop............or, it's a laptop that acts like a phone............no way this could be a bomb!
Bomb bomb bomb............bomb bomb ba bomb..............."Doing Atrix the Focker way"!
CaelanT said:
Wait!............You haven't seen the commercial???.............It's a phone that acts like a laptop............or, it's a laptop that acts like a phone............no way this could be a bomb!
Bomb bomb bomb............bomb bomb ba bomb..............."Doing Atrix the Focker way"!
Click to expand...
Click to collapse
Haha!
Sent from a Honeyglowin' Atrix
kimmikolter said:
Came across these by accident. I LOVE THEM! I was looking at the cases available for the Infuse, and found this odd brand by the name of Ballistic making a case for it. I became jealous and Googled them. Google took me to their website which I discovered, OUR PHONE is supported!
Here's the link (they are $35 & $50 for the one on the right): http://www.goballisticcase.com/products/motorola-atrix-ballistic-sg-series-case
Click to expand...
Click to collapse
Just emailed them to let me know when they are available. I have the otterbox defender and while I usually recommend them, the one for the atrix has issues. I'm on my second outer silicone part, and this one doesn't fit right either. The bottom corners bulge away from the inner plastic part, which makes them come off pretty easy.
barry99705 said:
Just emailed them to let me know when they are available. I have the otterbox defender and while I usually recommend them, the one for the atrix has issues. I'm on my second outer silicone part, and this one doesn't fit right either. The bottom corners bulge away from the inner plastic part, which makes them come off pretty easy.
Click to expand...
Click to collapse
x2
The cases happen to be made right here in Fort Lauderdale on the other side of town. I may go get one on Monday. I have the Commuter case which I like, especially since the ports and earphone jack have covers to keep out dust and dirt and the case is easy to get on and off. I dunno if the ballistic has covers and there are no pictures of the front i can find but the design and colors look nice and I am sure the protection is good. Anyone get one yet?
Damn that thing looks thicker then my otterbox defender case. I like the color schemes though. Does it come with a holster? I have to use the holster with my defender case, just to hard putting it in my pocket.
sifon187 said:
Damn that thing looks thicker then my otterbox defender case. I like the color schemes though. Does it come with a holster? I have to use the holster with my defender case, just to hard putting it in my pocket.
Click to expand...
Click to collapse
Yea, the big one comes with one, at least it's in the pictures....
panflute said:
The cases happen to be made right here in Fort Lauderdale on the other side of town. I may go get one on Monday. I have the Commuter case which I like, especially since the ports and earphone jack have covers to keep out dust and dirt and the case is easy to get on and off. I dunno if the ballistic has covers and there are no pictures of the front i can find but the design and colors look nice and I am sure the protection is good. Anyone get one yet?
Click to expand...
Click to collapse
Let us know if you get one. I definitely want one! Black on black is my choice, but the red/black looks pretty cool too.
Awesome!
Got my Ballistic SG
Well I recieved my Ballistic SG in the mail today, got it off ebay for $22 bucks! I haven't bought a lot of cases for my Atrix yet, I tried a Otterbox Impact on launch day and was disappointed with that. This case however feels extremely tough, My brother has the Otterbox Commuter, which i thought was awesome untill this one showed up. It feels very solid, The ports on the side are left exposed, as well as the speaker grill. The space for the fingerprint sensor does feel a slight bit cramped when swiping downwards, I may have to re-enter my prints to get it to read more accurately, but for now it doesn't seem to affect it too much. I've only had it for about 30 minutes but so far i'm impressed. The case doesn't slide around on the phone (though that may be in part to my invisible shield). The rubber/silicone layer does attract dust, but overall I'm happy with my purchase. I attached a few pictures if anyone's interested.
Reaverofdawn said:
Well I recieved my Ballistic SG in the mail today, got it off ebay for $22 bucks! I haven't bought a lot of cases for my Atrix yet, I tried a Otterbox Impact on launch day and was disappointed with that. This case however feels extremely tough, My brother has the Otterbox Commuter, which i thought was awesome untill this one showed up. It feels very solid, The ports on the side are left exposed, as well as the speaker grill. The space for the fingerprint sensor does feel a slight bit cramped when swiping downwards, I may have to re-enter my prints to get it to read more accurately, but for now it doesn't seem to affect it too much. I've only had it for about 30 minutes but so far i'm impressed. The case doesn't slide around on the phone (though that may be in part to my invisible shield). The rubber/silicone layer does attract dust, but overall I'm happy with my purchase. I attached a few pictures if anyone's interested.
Click to expand...
Click to collapse
Not a bad looking case ya got there... is it rubber or plastic or both?
Edit: so the grey is rubber, red is plastic?
Sent from my Motorola Atrix 4G on the network with the most backhaul, whatever that is. This post might have errors as I hate touchscreen keyboards.
Yeah, the black part is rubber, the red is plastic, with a weird layer of black, that feels like slightly rubberized plastic. After using it for a few hours now I'm still satisfied with it. Definitely feels more solid than my brothers commuter case. Now to wait for the HC to be released and try that sucker out.
Dude, that's freaking sweet looking. Can't wait for the HC cases to be released.
Reaverofdawn said:
Yeah, the black part is rubber, the red is plastic, with a weird layer of black, that feels like slightly rubberized plastic. After using it for a few hours now I'm still satisfied with it. Definitely feels more solid than my brothers commuter case. Now to wait for the HC to be released and try that sucker out.
Click to expand...
Click to collapse
Can you please drop your phone from the second or third floor while it's in the case and if nothing happens can you drop it without a case? I just want to check how though is the case before investing in it.
fincan said:
Can you please drop your phone from the second or third floor while it's in the case and if nothing happens can you drop it without a case? I just want to check how though is the case before investing in it.
Click to expand...
Click to collapse
epic !
I like it! May replace my Commuter, even though I couldnt be happier with the OB.
covered ports
I did not buy this case (yet). It looks really similar to the Commuter case as the designs are the same///a soft rubber held on with a hard plastic. However, the ports are not covered on this one. On the commuter both ports are covered in addition to the earphone jack. Someone here reported dust on the inside of the screen and it may have entered thru the earphone jack? On my wish list is a case with a built in stand.
I've been looking through the threads but I am still not sure if I should get this case Black TPU S-Line Gel Skin case (They are only $1.99 on ebay) or a Trident Aegis.
I'm not too concerned with protection but will the TPU case be protective enough from some short drops?
And for those who have a Trident Aegis case, how much bulk does it add to your phone?
Also, if anyone has any other case recommendations, feel free to share. I'm really just looking for a thinnish stylish case.
Rum2rum said:
I've been looking through the threads but I am still not sure if I should get this case Black TPU S-Line Gel Skin case (They are only $1.99 on ebay) or a Trident Aegis.
I'm not too concerned with protection but will the TPU case be protective enough from some short drops?
And for those who have a Trident Aegis case, how much bulk does it add to your phone?
Also, if anyone has any other case recommendations, feel free to share. I'm really just looking for a thinnish stylish case.
Click to expand...
Click to collapse
I have the Trident Aegis. It provides good drop protection and doesn't add much bulk to the phone. If anything it adds personality to the phone IMO. Dont expect much out of the TPU case. It will protect it against scratches but will not help absorb the impact of the fall. I had a TPU case on my Evo 3d and I dropped it from waist height, the phone looked ok but the digitizer messed up. Ive dropped my Epic touch alot on concrete and the Trident case does a great job of protecting the phone. I would highly recommend it. As a warning do not get the Otterbox Commuter. Its slippery and the buttons are hard to press. I cant comment on the Defender but the Commuter for the Epic Touch is not one of their best cases.
Had a trident, switched to tpu.. Trident too thick and had too much grip when sliding out of pockets
Sent from my SPH-D710 using xda premium
I own both. I daily a TPU and the protection is fine. Mind you I have a desk job. However I think that when going out on a long trip the Trident is the better choice.
Sent from my SPH-D710 using Tapatalk 2
I also have a Trident Aegis a S-line TPU case and a dizitronic matte tpu case.
The TPU cases provide very little protection against shock or anything. They are good for keeping the phone from actually touching a surface and they add extra grip. I will sometimes use one when I'm home or at the office and my phone is just sitting on a desk while I work but I don't feel comfortable going out into the world with one. Volume and power buttons are also a bit difficult to use with tpu cases.
The Trident Aegis on the other hand stays on my phone 90% of the time. It adds a layer of protection that makes me comfortable and gives it a bit of rugged style. The design of the case also enhances the volume and power buttons and makes them very easy to push. A few weeks ago my baby grabbed my phone off a picnic table and dropped it on the concrete. No issues whatsoever, the Aegis absorbed the impact. It does add a bit more bulk than most people would like but its smaller than the ballistic or otterbox.
My recommendation is buy a few cases and go with what feels best for you. My phone is with me 24x7 so I didn't mind spending a few extra bucks on cases and screen protectors to find the combo I liked.
I had the black TPU and then later I bought the Aegis.
The TPU is good for what it's worth. It's cheap, looks nice, doesn't add bulk, and sort of protects your phone. The Aegis is real protection though. It DOES add considerable bulk, but it's also cheap and it looks nice. The drop protection is a lot better than the TPU though and it also has covers for the USB and mic ports so it prevents dust. My number one pet peeve with the TPU was that it collected dust, so the Aegis is perfect for me.
mexiking713 said:
I have the Trident Aegis. It provides good drop protection and doesn't add much bulk to the phone. If anything it adds personality to the phone IMO. Dont expect much out of the TPU case. It will protect it against scratches but will not help absorb the impact of the fall. I had a TPU case on my Evo 3d and I dropped it from waist height, the phone looked ok but the digitizer messed up. Ive dropped my Epic touch alot on concrete and the Trident case does a great job of protecting the phone. I would highly recommend it. As a warning do not get the Otterbox Commuter. Its slippery and the buttons are hard to press. I cant comment on the Defender but the Commuter for the Epic Touch is not one of their best cases.
Click to expand...
Click to collapse
I just received the Trident Aegis today. I bought it after using the Otterbox Commuter case. I know some people were complaining about the buttons being hard to press on the commuter, but without anything else to compare it to I thought it was fine and didn't understand why people were having problems.
Well, I put the Aegis on today and all I can say is wow! The buttons are SO much easier to press. It actually feels good pressing them lol. The OB and the Aegis are similar in design (with the Aegis being more aesthetic) but there is a bit more rubber exposed on the Aegis which improves the grip a bit more. The OB is just way to slippery. I'm happy with the Aegis and will be sticking with it; most likely as my permanent case. And for $18 on Amazon you cant go wrong
I have the TPU case. Its nice. Though, made from cheap materials, its starting to show its wear. I think I may check out this Trident Aegis case, looks awesome!
Here's another good case. This one is very similar to the Ballistic case, but not quite as bulky. Like the Ballistic and Trident cases, it has an inner silicone layer and then a hard plastic layer that goes on over it. I also like how it has thicker silicone on the corners to better absorb the impact of a drop.
It's available in multiple colors, I got the yellow one a couple weeks ago and I just ordered the pink version for the wife's phone. I also like the look of the white one, I just might order up one of those too.
http://www.ebay.com/itm/130680664696
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SPH-D710 using Tapatalk 2
kd0axs said:
Here's another good case. This one is very similar to the Ballistic case, but not quite as bulky. Like the Ballistic and Trident cases, it has an inner silicone layer and then a hard plastic layer that goes on over it. I also like how it has thicker silicone on the corners to better absorb the impact of a drop.
It's available in multiple colors, I got the yellow one a couple weeks ago and I just ordered the pink version for the wife's phone. I also like the look of the white one, I just might order up one of those too.
http://www.ebay.com/itm/130680664696
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
It's just as fugly as the Ballistic, lol.
To OP: get yourself a Trident if you want some color, or the Case Mate Tough if you're ok with black.
Both of them are amazing cases.
Transmission sent from my slim n trim Galaxy S II.
Pheno.menon said:
It's just as fugly as the Ballistic, lol
Click to expand...
Click to collapse
I guess everyone has their own opinion. I like the look of this case much better. The Trident is ugly IMO.
Sent from my SPH-D710 using Tapatalk 2
trident adds small amount of bulk but blends well with phone- and protection is
well worth the small increase- the one drop you make with tpu- could be the last one to cost you $$$ Much less bulky looking than ballistic- and opinions are personal- evryone has one- wrong and right. In this case- Ugly is in eye of blind beholder.
kd0axs said:
I guess everyone has their own opinion. I like the look of this case much better. The Trident is ugly IMO.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
The thing is, if Ballistic (or the company you linked) made cases without those goofy padded corners, they would be much better looking. At my work everyone I asked preferred the look of the Casemate Tough to the Ballistic precisely for this reason. Also, they make getting the phone in and out of pockets more difficult than it should be.
That white case would look downright sexy if it had normal corners.. I'm sure there isn't that much difference in terms of protection offered.
Transmission sent from my slim n trim Galaxy S II.
I agree it would look better without the big corners, but they provide extra protection in case of a drop. I guess that's a trade off I don't mind.
Sent from my SPH-D710 using Tapatalk 2
Thanks everyone. I am now ordering my Trident Aegis. I think the bulk is worth it if it will save my phone. Plus my phone will have some color to it!
Rum2rum said:
Thanks everyone. I am now ordering my Trident Aegis. I think the bulk is worth it if it will save my phone. Plus my phone will have some color to it!
Click to expand...
Click to collapse
This is the first phone I've owned that I've used a case with. I was a bit hesitant because I love how the phone looks on its own. I bit the bullet and grabbed the Aegis, and I haven't regretted it one bit. It still looks fantastic and I've had a couple of accidents that could have easily been phone killers, but there's not a blemish on my phone OR the case. I'm impressed with it.
Anyone have any REAL pictures of what the phone looks like with the Trident case on?
What are people using for heavy duty protection? My job is pretty rugged outside in the elements a lot. Right now I'm using the seidio convert case and its nice but its dosent have a built in screen protector, it comes with a stick on one but I've never had good luck with them. I had an otterbox defender with my evo 4g and it was great i alsohad great customer service with otterbox. I think I'm gonna get another defender series otterbox I'm just curious if there are any other hard core protective cases i should look into.
Sent from my SPH-D710 using XDA
Just got the Aegis in red. Can't wait to put it on!
dw3bb10 said:
Anyone have any REAL pictures of what the phone looks like with the Trident case on?
Click to expand...
Click to collapse
kd0axs said:
Here's another good case. This one is very similar to the Ballistic case, but not quite as bulky. Like the Ballistic and Trident cases, it has an inner silicone layer and then a hard plastic layer that goes on over it. I also like how it has thicker silicone on the corners to better absorb the impact of a drop.
It's available in multiple colors, I got the yellow one a couple weeks ago and I just ordered the pink version for the wife's phone. I also like the look of the white one, I just might order up one of those too.
http://www.ebay.com/itm/130680664696
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Are the white areas grippy silicone or hard plastic? Is the case just as easy to remove as the ballistic case?
This is a new case offered by Incipio I already ordered mine I was just wondering if anyone has this case because I've searched the forums and found not anyone has mentioned it. I like tpu cases but I like the feel of polycarbonate. This case is probably similar to the Spigen NGP neo hybrid, which is what I was waiting for but I can't wait any longer. So let me know what you guys think about it if you own it.
http://www.incipio.com/Samsung-Gala...-Soft-Shell-Case-with-Polycarbonate-Frame.asp
Coupon code Sum2012 for 20% off. 27.99 free shipping.
I really like this one...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.incipio.com/Samsung-Gala...-SHINE-Hard-Shell-Case-with-Silicone-Core.asp
1SiK1500 said:
I really like this one...
http://www.incipio.com/Samsung-Gala...-SHINE-Hard-Shell-Case-with-Silicone-Core.asp
Click to expand...
Click to collapse
I just ordered the DualPro Shine last night!
mav3rick478 said:
I just ordered the DualPro Shine last night!
Click to expand...
Click to collapse
Please post pictures when it comes in! what color combo did you get?
How do these stack up against the Trident Aegis or Otterbox Commuter cases? This case life sits right between those two in terms of pricing.
Sent from my SPH-L710 using xda premium
Just got my s3 today and got the incipio case from radio shack, just so it wasn't naked. The case is alright, light and thin, but the screen saver blows.
Sent from my SAMSUNG-SGH-I747 using xda premium
ughh I was gonna post this case, but I thought people already know about it! I think it's super nice. wanna see some reviews! :d Thanks for posting it.
ericpd said:
How do these stack up against the Trident Aegis or Otterbox Commuter cases? This case life sits right between those two in terms of pricing.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I had a commuter for about 24hrs... Now on a silicryllic and couldn't be happier. I have no kids, no real damage to any device but an iPhone that fell completely face flat onto hardwood @ 4ft and shattered into 100 pieces in an incase slider.
Otterbox Commuter
Pros
- Tough as hell! It seems overkill for my everyday use. People with defenders must play baseball with their devices.
- Dust covers will keep things cleaner.
- Flash, Camera, speaker are seperate cutouts and deep.
Cons
- Added way too much thickness IMO. I don't remember my iPhone 3GS in a case being this thick...
- Plastic is SLIPPERY. You need such a tough case because you'll be dropping it more than naked.
- Plastic came down the sides further than I would like, so you're holding onto it's slippery face, and not the rubber near the screen face.
- Buttons are terrible to press, way to hard.
- Damn near impossible to remove. I like to remove mine for cleaning once a week or two, and switch out with a thin hard shell depending on my day.
Incipio Silicryllic (Should note I've had this on two other phones now, but been happy with it's durability on them)
Pros
- Slips into pocket very easy.
- Isn't too thick
- Adds side grip over stock
- Looks much better, frankly more grown-up too.
- Slightly easier to hit the home button
- Around $10 cheaper than Commuter
Cons
- Probably not as protective as the Commuter on big drops(Based on a GNex and Titan, It's still very good, better than a TPU, hard shell, etc)
- Flash, Camera, Speaker opening is one large hole, easier to get the lens if it's lands on a protrusion.
- no port coverings
- Silicone can catch dust, but a quick wipe takes care of anything visible with it's clean lines.
This thread was about the Incipio Faxion guys not other incipio cases
Got my faxion case.. And I like it... It is thinner and lighter than the sycrillic and has good drop protection. It is in between a two piece case like sycrillic and a tpu case.. The polycarbonate back does scratch up fairly easy. I have the blue and Grey case. The white might not show up as much. I will post pics if I get the time.
Oh dang I never noticed this was a TPU/Polycarb case . How sturdy is the TPU core around the top and the bottom of the phone? I recently got the Silicryllic case and I don't like how loose the top and especially the bottom where the USB mini port is. It feels like that area might tear sooner or later.
mossolb said:
Oh dang I never noticed this was a TPU/Polycarb case . How sturdy is the TPU core around the top and the bottom of the phone? I recently got the Silicryllic case and I don't like how loose the top and especially the bottom where the USB mini port is. It feels like that area might tear sooner or later.
Click to expand...
Click to collapse
While silicone does tend to be a little more flexible, I've never had even a pure silicone case tear on me yet, and I've had versions for years on a phone and a 7" tablet (switched to a folio for the tablet, though - better screen protection)
IMO, I'd always prefer silicone over TPU in a hybrid case, since it both provides better grip (if exposed by the polycarb shell) and better shock absorption. I don't think I'd ever want a pure silicone case for a phone ever again, though, since while the extreme grippiness is great, it's a lint magnet and a pain to pull out of your pocket sometimes. Also, it's too easy for toddlers to rip it off.
zmore said:
While silicone does tend to be a little more flexible, I've never had even a pure silicone case tear on me yet, and I've had versions for years on a phone and a 7" tablet (switched to a folio for the tablet, though - better screen protection)
IMO, I'd always prefer silicone over TPU in a hybrid case, since it both provides better grip (if exposed by the polycarb shell) and better shock absorption. I don't think I'd ever want a pure silicone case for a phone ever again, though, since while the extreme grippiness is great, it's a lint magnet and a pain to pull out of your pocket sometimes. Also, it's too easy for toddlers to rip it off.
Click to expand...
Click to collapse
A friend had a simple silicone case on his phone and had those exact problems as you mentioned with it being a lint magnet and how troublesome to put it in and pull it out of the pocket.
My family recently upgraded their phones to the Epic 4G Touch and I ordered some simple TPU cases for them and I found even though the grip is less compared to the silicone hybrid, just adding some bulk helps with gripping the phones. I like how the TPU cases are just a tighter fit around the phones.
We all have come from phones that were maybe 4+ years old so they were thicker and we didn't have to worry much about damaging the phone from a drop. I myself came from the HTC Mogul so it was a huge change in the thickness of the phone.
What about the body glove drop suit? Anyone seen this, or have any opinions on it.
Sent from my Nexus S 4G using xda premium
great comparison! thanks for sharing!
Hello guys, so I recently bought a AT&T i747 SGS3 and knowing how picky I am with my electronics I started to look right away for a case.
The case must not add bulk, must offer great protection against scratches as well as the case not scratching the phone in any way, must offer camera protection and must have at least a small lip on the front.
So far I have come across these 3 which are:
Otterbox Commuter
SGP Neo Hybrid
Urban Armor Gear Case for the SGS3
As far as the otterbox commuter, I had it on my atrix 4g and loved the protection it offered but a few months later it just gets old, attracts lint on the borders and overall takes the beauty and slickness of the phone but I must mention protection was great and that is the most important feature for me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The SGP Neo looks very promising offering a good quality screen protector and overall a great case all around but what has me worried is the direct contact of the TPU with the phone, specially the camera area and bezel as opposed to the otterbox which has a rubber sleeve, I had a blackberry about a year ago and the phone scratched badly on the bezel from dust getting under speck TPU case and acting as sand paper.
The Urban Armor Case seems like a very well rounded case, offering some type of rubber/soft TPU inner lining on the inside and a very tough poly-carbonate shield on the outside. What I like is that both pieces are bonded together offering a seamless design but what worries me a little is the X pattern on the inside which seems to be part of the outer hard layer which goes all the way to the top of the camera/flash/mic opening which could potentially scratch those components down the line.
Which case would you recommend and why?
Other case recommendations are welcome.
I wouldn't recommend the SGP Neo Hybrid due to the issues regarding sensitive buttons which many/most people are experiencing.
To make things harder for you, I'd also recommend looking at either the Incipio Silicrylic or the Acase Superleggera.
Edit: I also hope you realize you're in the wrong device forum (but accessories are all the same so doesn't matter)
Sent from my GT-I9300 using Tapatalk 2
I have the urban armor case and I really like it. It gives the phone a great feel in the hand and good protection from drops
Sent from my SGH-T999 using xda app-developers app
UAG, with out a doubt.
Sent from my BAKED SIII
Otterbox commuter. Feels better, looks better and UAG has horrible customer service
Sent from my SPH-L710 using xda app-developers app
Otterbox no longer attracts lint.
Otterbox is the biggest and has the most sturdy feel to it.
UAG feels really good in the hand. Less slippery than otterbox.
SGP still has button issues. It is super thin but feels as sturdy as a gel case.
The speck case is nice.
Sent from my SAMSUNG-SGH-I747 using xda premium
How about
how about using the original from Samsung called flip cover that comes especially for protecting front and back side, see the pic:
I have the same color as the pic, your SGS3 will look very nice, I promise!!!!
Dont forget the Trident Aegis
Acase Superleggera
Currently not being productive on my S3.
.
I have the UAG & Neo Hybrid, both are going back.
UAG isn't bad at all, but I'm not a fan of the stiff buttons...that being said, the Neo Hybrid buttons are atrocious. I can't believe they even released this case with all the issues I've been having.
Will probably try the commuter case next, as people seem to be having less issues with the power button.
Hey guys,
I have all three cases. Hands down the feel and the buttons go to UAG. what r u guys talking about the UAG buttons feel crappy?'honestly they feel better then any case I have ever tried for the gs3. The protection , otterbox wins this by a hair. Look goes to sgp but its very thin, buttons feel like crap and you can't buy the plastic bands seperate.. plus customer support is crappy. I love sgp ultra clear screen protectors though..
I'm just giving my honest opinion and in very anal on cases.. the gf gives me verbal treatment for buying all these cases
Thank you guys for your sincere opinions, so far I am leaning towards the UAG in white. I never drop my phones or anything and they are always over some layer of rubber or cloth when out of my pocket but I know accidents happened and that is why I need a case to at least cover it from getting scratched or dinged.
DBA Ultra Complete
wceoscar said:
Thank you guys for your sincere opinions, so far I am leaning towards the UAG in white. I never drop my phones or anything and they are always over some layer of rubber or cloth when out of my pocket but I know accidents happened and that is why I need a case to at least cover it from getting scratched or dinged.
Click to expand...
Click to collapse
I own, use, and recommend the DBA Cases Complete Ultra. It is both thin and protective. The inner piece is made of TPU, no scratching your phone. The outer piece is a flexible polycarbonate. The fit and finish are first-rate. Both sides of the phone are protected when resting on a flat surface.
RebDovid said:
I own, use, and recommend the DBA Cases Complete Ultra. It is both thin and protective. The inner piece is made of TPU, no scratching your phone. The outer piece is a flexible polycarbonate. The fit and finish are first-rate. Both sides of the phone are protected when resting on a flat surface.
Click to expand...
Click to collapse
I've been thinking about getting one of those cases but I was wondering what kind of drop protection this case offers
Sent from my SGH-T999 using xda app-developers app
Look at some reviews for the Incipio SILICRYLIC DualPro. I don't own it yet but it looks promising.
Sent from my GT-I9300
lolhard123 said:
Look at some reviews for the Incipio SILICRYLIC DualPro. I don't own it yet but it looks promising.
Sent from my GT-I9300
Click to expand...
Click to collapse
The Acase one is pretty nice for a dual layer one. It's what I use.
Godwarrior1 said:
how about using the original from Samsung called flip cover that comes especially for protecting front and back side, see the pic:
I have the same color as the pic, your SGS3 will look very nice, I promise!!!!
Click to expand...
Click to collapse
i have this case and the otter box (defender and commuter)
i like the defender because it has a protective screen the protects the entire front screen... the bad, obviously the size.
I like the commuter because it doesn't bulk up the phone that much, a bit slipper though at the back.
the original front flip case looks the best... but offers the least protection
Get the Commuter case! It's add a little bit bulky but the protection was MAX! I did few drop test in front of my friends to show off. It's drop from about 1.2 meter height and the case and phone survive it. I would recommend UAG case due to special design..^^
Commuter = Max protection + Keep the round shape of the phone
UAG = Less protection than Commuter + Makes your phone a bit square + nice design & less slippery.
Final decision still yours. Both case almost at the same price(UAG at Amazon.com, now only 21.99!!). Grab one of this and you will not regret for it. If not, grab both cases..xD
---------- Post added at 02:25 PM ---------- Previous post was at 02:20 PM ----------
Godwarrior1 said:
how about using the original from Samsung called flip cover that comes especially for protecting front and back side, see the pic:
I have the same color as the pic, your SGS3 will look very nice, I promise!!!!
Click to expand...
Click to collapse
My sister grab this case also. :laugh: Nice looking in the begining but after few months of use, the side of the flip cover start peeling off. Now she is using Non-Genuine SGP Neo Hybrid case only $6.
falcons2 said:
I've been thinking about getting one of those cases but I was wondering what kind of drop protection this case offers
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I'm waiting for mine to get here, just ordered one myself. As for drop protection, I would assume it offers as much protection as the spg or uag cases, if not more. There's a DBA thread where there is a picture of the outer plastic part of the case being bent almost in half and it still doesn't break so it's got to be pretty tough. The otterbox is pretty much max protection as far as drops go but it is also bulkier than any of the others mentioned.