hi i have a desire z in a closet,today i took it and turned on,the touchscreen didn't respond,i haven't used it,so i guessed it was a kernel problem,so i flashed the latest virtuos 4 ics,same problem
so im guessing its a hardware problem(waddafck??) need to do a rma,but the phone its s-off and rooted and MOST IMPORTANT i cant remeber if the s-off was made by engineering hboot or gfree,i dont have the sdcard nomore so no gfree backup
if this is the case i'm ****ed?
edit
touchscreen seems to work right now but is slow as hell
edit2
not working right now,what the **** is going on??
edit3
working sometimes
edit4
flashed vision rom and touchscreen is not working at all
edit5
in recovery mode touchscreens buttons(home,back) are working fine...
Related
Hi friends
i am using HTC wildfire, android froyo 2.2.1 i bought new mobile (3 months old)
touch screen input not working properly and sometimes touch was hanging
that problem came from rooted the device
pls, anybody help me
how to recover the problem
Thanks
Hi, I recently started experiencing touchscreen issues all of a sudden on my wildfire which is very weird.
i have uploaded a video on youtube of the problem.. please let me know if anythin can be done. my phone isn't rooted.
http://www.youtube.com/watch?v=spDBm34OgWU
yes..got the fix
Use cm7 for fix
what???>>>Use cm7 for fix
what is this??and how use this??
Try taking it to the service center. If you want, un-root it beforehand so that they can't claim the warranty is void.
wildfire touch screen problem after 2 week of rooting
shemulweb said:
Use cm7 for fix
Click to expand...
Click to collapse
i just rooted my wildfire a few days back and succesfully installed custom rom,everything was working fine,until now,today when i restarted my wildfire i couldn't unlock my phone because the touch screen was not working please help me,i don't know that if the touch screen has been damaged or may be the custom rom has some issues.
Its prob the ROM.
Perform a FULL clockworkmod wipe and install the ROM completely from scratch. If that doesn't work, try the same thing with a different ROM. And if that doesn't work, well, than I was wrong and it is prob not your ROM, but an hardware issue.
Good luck
Erwin
i cant post in dev section yet so i just installed bcm 3.3 cm9 from dk_zero cool and the home button stopped working ,the market says not enough memory which there is ,the lock screen is gone but is ticked in settings.i tried reinstalling but still the same,i have 1gb ext4 on sd as well ,just after some advice or help .i restored back to last version and all works fine .
What hboot do you have? If you have never heard of hboot or never changed it, its stock hboot and ok.
has the stock hboot and s-off
Hi. I just flashed my old g2 with ARHD 7 and now the phone after I turn it on it boots into the HTC screen and then it goes directly into recovery. I had never had a problem like this when flashing a rom in this phone. I have searched all around but still cant find anything like this.
Off the top of my head, do you have the Desire Z hboot installed?
(Not sure if the problem description is a symptom of not having it, but it is required when running pretty much any Sense ROM)
This can happen if the ROM you flashed did not flash properly. Have you tried to wipe everything, redownload, and reflash the ROM?
I believe that biohazrd51 is correct, not having the desire z HBOOT can cause this problem as well.
Hey! Thanks for the replies! I did found out that I didn't had the desire z hboot....noobiadaaaa onmy side...hehe...I flashed it and I didn't even had to reflash the rom...it worked flawlesly. I was trying to use the phone with AT&T but it would not connect in other band than edge. I guess I'll check to see if the frequencies on the G2 are compatible with the AT&T network. It would make calls and receive. But the internet was slow as hell! Thanks again guys.
Hello everybody ....
My problem is with the accelerometer as about one month ago i needed try one sense rom on my G2 so i flashed the desire Z hboot as it was required to get the rom working , Yesterday i needed return back to normal rom so i flashed back the G2 hboot and flashed the rom & GAPPS , when it started the wizard of the first time i noticed screen doesn't rotate but ok , i thought maybe in settings is not set to rotate by default but after i ended with the wizard i found in settings that auto-rotate screen is checked , here i thought the problem is with rom specially that i downloaded one program from play store to test sensor and found that all sensor values are "0" , i flashed an old rom i had before with the G2 hboot ( accelerometer was working like charm with that rom in the past ) and i found that this rom too has same issue , screen can't rotate , I flashed back desire Z hboot and found that sensor returned to work again and screen is rotating the right way , i tried back G2 hboot with no hope , now i`m forced to use desire Z hboot to keep accelerometer working
any ideas ????
Just keep the dz hboot, if this is working you just loose a little of your data partition for the system, it seems you aren't the first with this issue but no real reasoning has been made to as why. Just flash whatever ROM you please, keeping the dz bootloader
Sent from my Nexus 4 using xda premium
Okaii so my htc was working all normally , suddenly the screen touch stopped resonding , once i restart it , it works for like a minute then stops , but sometimes it doesn't work at all , i want to know if it's hardware related or software , it's rooted and it has ARHD , i did a nan droid restore to stock but the issue is still there.. help ?
( Also no touch in CWR , i use the volume buttons.. )
No touch in cwm is probably due to the used version of cwm. But the inside the running OS you should not have that issue !
It was on arhd & stock, my guess .... hardware issue !
Mr Hofs said:
No touch in cwm is probably due to the used version of cwm. But the inside the running OS you should not have that issue !
It was on arhd & stock, my guess .... hardware issue !
Click to expand...
Click to collapse
Well i wish it's a hardware issue because after all the things i have done , from nandroid to CID getting to restoring and everything , nothing worked ! i was on ARHD 33.1 for like a whole month and noting happened , just one day it stopped and started this glitching :/ so you recommend fixing the screen or something wired inside it ?
I cant recommend anything, im not a hardware guy .....sorry.