Develop Bugs

[Q] Camera Broken Upon Update?

Anyone else have the camera load to a blank black screen with no buttons in any and all apps that utilize the camera? Camera, Barcode Scanner, Sniper Shot, and all other programs that use the camera fail to load since the update. Anyone have any idea as to why?

DanielWGK said:
Anyone else have the camera load to a blank black screen with no buttons in any and all apps that utilize the camera? Camera, Barcode Scanner, Sniper Shot, and all other programs that use the camera fail to load since the update. Anyone have any idea as to why?
Click to expand...
Click to collapse
Did you try a restart, I have heard of camera problems like this before (i think first FroYo update) and all it needed was a simple reboot.

Reboot didn't work. I reflashed the rom and BAM, it worked again. Crisis averted.

I have the same problem.
I'm running the following:
Azreal 3.0
circular battery widget update
removed HTC lock screen
superior battery charging kernel
wifi hotspot patch
I'm currently trying things to figure out what will fix it.
Here are the current things I have tried that did NOT fix the problem:
Reboot
Wipe cache/davlik cache
fix UID mismatches
I then reflashed azreal 3.0
At this point the camera worked again but everything was wiped. I then reapplied the following patches:
Circular battery
remove HTC lock screen
wifi/hotspot patch
after this everything continued to work
I then applied:
superior battery charging kernel and it broke again
I think the problem is the superior battery charging kernel

i am having the same problem and have not been successful yet fixing it. switched from cm7 back to stock to update my prl and tryed to use the camera while stock when the black blank screen happened. flashed to evdo(sense) and same result. flashed back to cm7 and the 1st time i opened camera it opened the ffc. when i tried to switch and everytime i have tried to open it since i get "camera error cannot connect to camera" help plz!

If you have HW 0004 phone or HW003 with the new camera, you have to make sure your rom has a kernel with the NEW drivers. The kernel in my signature has the new drivers for ASOP roms (like cm 7).

just flashed Savaged-Zen-V002-CFS-HAVS-SBC-WiMAX - GB.zip
with the same result running cm7. seems like ive tried 20 different things with no success. everything i have flashed has been off my sd meaning i have had all of it running before at one time or another with no problem. i really cant think of what ive done new to have caused this

Same here
Happened to me right after I flashed calkulins_format_all.zip and then the MikFroyo4.4.zip yesterday. I thought it was a problem with mikfroyo so I flashed Azraelz 3.1 and still the same issue (i was using azrael 3.0 with no prob prior to mikfroyo).
I'll post if I find anything that works, please also give any suggestions i'm willing to try anything b4 i take her to sprint.

I also flashed calkulins evio rom. When I flash back to stock it will start running again sometimes. Not even right away though. It will be black for a while then if I just let the phone sleep for a bit and come back to it bam. Camera again. For a little while. Then back to the same thing an hour later without doing anything! This is very frustrating! Someone plz help!
Sent from my PC36100 using XDA App

UPDATE
I turned my phone off and switched SD cards to one that has an old backup (3.29, kernel#11), when I booted into recovery, I could hear clicking noices coming from the lens, at a super fast rate (say 2-3 clicks a second).
Not wanting to do any more damage I turned off the phone.
I did just take my phone to sprint to fix my kick stand, maybe they did something to mess with me (thats just my paranoid side speaking)...
But what gives? What would make the camera shutter do that while im in recovery (btw using latest amon ra recovery)?

Multitouch doesn't work after flashing

Hi everybody!
I've recently flashed my rooted unbranded htc desire with the starburst 1.2.1+app2sd. Everything has gone well, except that my desire doesn't recognize anymore two touch input, only one (the pinch-to-zoom doesn't work so I tested the multitouch with an app, so I'm sure that is a real problem). What am I missing? Did I do something bad? Thanks!

I've seen that the 1.3.0 is out, right now I'm backing up so I'll see if flashing the new one will solve the problem

Perfect! With the new release everything is back to normal! This thread can be closed

Now it stopped working again!
I simply can't understand, I flash, it works for a while and suddenly it stops again. I can't keep on flashing, please someone has an idea?

I've done another flashing (I hope the last one) without wiping and applying the data2sd reinstaller. It seems to work properly, hope it'll last

[Q] Help: Gps not working as it should.

Hey guys,
My gps isn't working accurate.
First off it worked pretty good but when I changed to a custom rom (android revolution Hd) it didn't anymore.
When i use google maps, it takes a damn long time to get a fix on my position and when it does it stays accurate for about 5 seconds and then it starts to change to a street next to me then to another side... etc. . Also when i am standing still it jumps for my location to 50meters ahead of me and behind me, changing my speed to 20km/h ... I think you get the problem. Also the same problem on navigon (navigation software) it is constanly rerouting me because of the inaccurate position. So its not an application issue.
I flashed the rom as it should be, with boot.img through fastboot and zip file in cwm. Except for the gps there are no other issues.
Then i flashed the original rom in cwm with boot.img in fastboot, still the same problem.
I then tried CM10 and it became even worse... every 20 seconds it gave me a position update in maps and with navigon there wasn't even a update because it couldn't get a fix.
And i also used fasterfix on every rom except the original one (not rooted) to set my gps to europe.pool.ntp.org or something like that...
Now i am trying to revert to android revolution HD but first my battery has to be charged above 10% and it goes damn slow because of the bricked boot (made a mistake while changing form CM10 to And rev HD) Can't flash the and rev HD yet but does somebody in the meantime know a solution ?

Somebody ??
Could it be a problem with the kernel ? because i didn't flash one separatly

Does somebody has a solution ?

Unfortunately, I also have the same problem with rom coredroid and igo primo aid to some expert please
thanks

I had the same issue when I moved from Stock to the Modaco Ir5 Vanilla ROM, my GPS didn't even go as far as finding my location inaccurately, it didn't work at all. Hence I couldn't use my maps/navigation.
I am now running the Slim Bean ROM and everything is working great. I am no expert, but have you always done the usual 'full wipe data > clear cache partition > clear Dalvik cache' while flashing new ROMs?
For your charging issue, maybe try this? http://forum.xda-developers.com/showthread.php?t=1646135

My phone is now allright but you i'll try the rom you are speaking about and see if the gps works better.
and... Also tried another kernel (eternity) but it still didn't work

I had this issue and had it fixed after sending my phone to service 3 times.
The first time they only did a reset, didn't help.
Second time they changed the wifi, GPS module, didn't help.
I sent them a recording of the problem on the third time. This time they changed the motherboard and it finally got fixed.
Remember to tell them that the issue is specially visible when GPS and WiFi are both on.
Sent from my HTC One X using xda app-developers app

waterscent said:
I had this issue and had it fixed after sending my phone to service 3 times.
The first time they only did a reset, didn't help.
Second time they changed the wifi, GPS module, didn't help.
I sent them a recording of the problem on the third time. This time they changed the motherboard and it finally got fixed.
Remember to tell them that the issue is specially visible when GPS and WiFi are both on.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
There isn't any diffrence when wifi is enabled and like i said, with stock rom everything was fine.

Just for now i can't flash another rom but other solutions are welcome...

kefjeuh93 said:
Just for now i can't flash another rom but other solutions are welcome...
Click to expand...
Click to collapse
Tried the agps patch (http://forum.xda-developers.com/showthread.php?t=1595800) still no solution

Tried some other roms and still nothing...
I will try to go back to stock with RUU but which one do i need to choose ? Based on what info ?
i know i have to choose HTC_E11 (dutch)

kefjeuh93 said:
Tried some other roms and still nothing...
I will try to go back to stock with RUU but which one do i need to choose ? Based on what info ?
i know i have to choose HTC_E11 (dutch)
Click to expand...
Click to collapse
This may help - GPS Fix.
It worked for me, but not for the faint hearted.

Sensors not working after revert from CM11 to 10

Hi all. I humbly request the knowledge of the ancients! I have rooted my HTC One X and I installed the regular CM11 on it. Due to the power drain bug I reverted to CM10.
However, since then my light, gravity and other sensors have not worked at all. Sensor box reports no activity. From Googling I think my problem is a known bug with low hboot versions, but when I run Cid checker I get no Cid back so I am unsure how to go about upgrading my hboot
I have tried various fixes found on the google, such as overheating and crashing the phone to no avail. If there is a way to fix it without a system wipe I would prefer it but if it is unavoidable I can live with that.
I thank you all in advance for any and all help given!

Bumping.

Sensors Broken after ROM Change

So, i'm completely lost. I was playing around with ROMs and mods (the RAM build.prop, for example), and now all my phone's sensors seem to be stuck.
I have reflashed back to completely stock ROM, taken official sprint update. Tried modded ROM, done factory resets, cleared/wiped everything, and still the issue persists.
It would appear my Gyroscope, Accelerometer, Proximity Sensor, and Compass are all not responding at all.
Right now i'm on rooted stock AOJ6.
Does anyone have any ideas? Maybe a corrupted sensor properties file or something similar like that? I'm completely at a loss.
Any help is appreciated.

Guys, it fixed itself. I booted into safe mode, restarted and all the sensors are working again.
I doubt it had anything to do with safe mode, as the sensors weren't working in safe mode.
I have no idea what could have done it. I wish I had a real answer for you.