is there a mod/ kernal etc flash able for miui that allows you to wake phone
using any of the desires buttons eg home etc .
what settings do i need to apply if i want my phone to lock immediately once screen goes out , at the moment it still wakes after my screen goes out ( pointless to put lock if screen lock doesn't appear once power button is pressed , i know about the app lock function on miui )
I've set my phone for the screen to go out after 30 sec .
if you want to change the buttons with which you wake your phone you could look here:
http://forum.xda-developers.com/showthread.php?t=683902
Related
Hi,
In general I am very happy with my new TP2, however, I keep forgetting to press the lock button (hold down the call end buttoun until it vibrates) prior to pussing the power button and putting it in the case.
Does anyone know of a way of adding this function to the power button, so that it automatically locks?
richkidd said:
Hi,
In general I am very happy with my new TP2, however, I keep forgetting to press the lock button (hold down the call end buttoun until it vibrates) prior to pussing the power button and putting it in the case.
Does anyone know of a way of adding this function to the power button, so that it automatically locks?
Click to expand...
Click to collapse
If you use S2U2 you get this functionality, I don't know how to do it with normal screen lock.
Dave
Or if you use Throttle Lock you can use a pattern to unlock your device, and you can set it up that when you push the powerbutton it gets locked with the pattern, or that when you push the powerbutton it will wait a x given minutes and then your device get's locked with a pattern.
I don't know how to do it with normal screen lock.
i have this on mine dont know how i got it take it came with some app i have installed
Anyone know how to fix this so that the phone's standard lock autolocks? Tried throttle etc but I still really like the simplicity of the normal phonelock, just need to get it to do it by itself.
Homescreen plusplus (Batterystatus) has this option. You can select lock on standby, it uses normal wm lock app. Used it on my Wizard, not sure if it's compatible with the TP2...
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm
aiaob said:
Anyone know how to fix this so that the phone's standard lock autolocks? Tried throttle etc but I still really like the simplicity of the normal phonelock, just need to get it to do it by itself.
Click to expand...
Click to collapse
Use TouchLockPro as locking utility. Automatically locks at power on and unlocks by light sensor. And you can configure a key unlock sequence. And with a slide to answer solution, you can only lock the hardware keys at incoming call.
if you simply press the power button that switches off the screen and locks all buttons.
uilt-in WM feature.
If you set a password it also automatically locks it
how do you enable ALL BUTTONS UNLOCK ?
in older devices there was an option somewhere in the keys section, now only the power button turns the phone on,. i want all the keys to turn it on, since i use the s2u2...
thanx
otohabibi said:
how do you enable ALL BUTTONS UNLOCK ?
in older devices there was an option somewhere in the keys section, now only the power button turns the phone on,. i want all the keys to turn it on, since i use the s2u2...
thanx
Click to expand...
Click to collapse
When not removed from ROM you will find it as \Windows\keylock.exe
Otherwise try: http://forum.xda-developers.com/showpost.php?p=5875933&postcount=5
I am still looking for auto lock at suspend. I don't want to install a program bringing with it 100.000 functions.
I dont see the point in adding extra features to a lock screen. its there to keep the screen locked and thats it lol
Anyways, try 'lock device GUI'
It just adds the function to lock the device when the power button is pushed (Sleep).
Keeps the old lock screen, only adds function
Yea check out LockDevice. I use it and it works great..
http://forum.xda-developers.com/showthread.php?t=542482
DeviceLock.cab Works As Well...
I had similar issue. So I installed "DeviceLock.cab" and added it as a Quick Link on HCT Sense 2.5 Homescreen. Now I just have to click on the link to lock the device. Once the screen if off the keys don't matter.
Also used "Lock Screen With Bottom Slider" for easy access.
I can't post links, but if you search for quote phrase, you should be able to find a download.
Hope that helps.
Try smartlock. Works perfect! Just install the cab, then it can be found in: Start/Settings/System
http://forum.xda-developers.com/showthread.php?t=505032
I like my device locked after pressing the Power button.
The screen goes off and I want my device locked.
Where in the prefs do I setup?
By default, every time you press the standby button, it is locked already. When you wake the device, you always have to do the downward swipe to unlock...
So, what's the problem?
If you mean the pattern code then it is a choice when you set the pattern up.....I think default is set to 3 mins.....change it to immediately.
Sent from my HTC Desire using XDA App
Thats exactly what's not working. I push the power knob. And my device just wakes up.
I can't find any settings in the pattern preferences either. THAT'S my problem
Wohoo. Just found it in and undersection of cyanogen prefs.
This application blocks the ringer mode to avoid changing the mode when the phone is locked (screen on)
this is a workaround for the following strange behavior / bug on stock android 4.2+:
Note: my phone uses a pattern to unlock screen.
- Steps to reproduce the problem.
1.Lock the phone, and light the screen with power button.
2.Long press power button until the power off menu appears.
3.Press the power button to close the screen.
- What happened.
4.After that, every time the screen is lighted (but not unlocked), press the volume keys can change the volume though no music is playing at all.
The volume keys keep working each time I turn on the screen without unlocking, and it is back to normal when I unlock the phone use the unlock pattern and lock again.
- What you think the correct behavior should be.
The volume keys should not work at all when the phone is showing lock screen, it has accidentally muted my phone and led to missed calls. This is worse than power off menu it self. Since power off menu only appears with long press, but when ever the menu appears once, the volume keys work every time until I re-lock the phone.
And also I don't think the power off menu should appear by long pressing during locking state, since it is quite possible that the power button can be long pressed even in my pocket during taking the phone in or out.
P.S. When the phone is rebooted and went into lock screen the first time, the volume keys will work on lock screen without the necessity of showing the power-off menu.
- Device
GSM Galaxy Nexus (yakju)
Unrooted Android 4.2 (factory image)
https://code.google.com/p/android/issues/detail?id=39828
https://code.google.com/p/android/issues/detail?id=39706
https://code.google.com/p/android/issues/detail?id=40522
Click to expand...
Click to collapse
Play Store Link:
Ringer Mode Lock
added steps to reproduce the problem and fix same bug
have any one faced this problem on h818n v10 d ??
it s like when u clear all recent applications and after that when u turn off display it shows unlock screen first then lights go off .(normally lights go off without anything) . it happens after i update v10 d on my G4 H818N .
after this i flashed KDZ file of v 10d and this problem still present.. i guess it was not in v 10 c cuz i didnt notice that problem earlier.
if anyone have this problem let me know . thankyou !
actually i figured out , that happens only when lock screen is set to knock code or pattern. its like when u clear all recent apps and then press multiwindow button ( u see no recent apps) .........>>> again press same button (multiwindow button) then turn off screen either by power button or double tap you will see one flash screen before lights dimm and display turns off . That screen is enter knock code screen or pattern screen when u turn on display (either by double tap or power button ) .
i dont know this is problem or not but i didnt notice this before .
plz guys ! i notice that when i unfold the phone its open without lock screen ?
but i have great lock screen wallpaper i cant see him so how can i unfold the phone and see the lockscreen?
Do you see a lock screen if you leave the phone open and press the power button (to lock the phone) than press it again (turning the screen back on) while making sure not to use a finger you have set up with fingerprint unlock?
_Dennis_ said:
Do you see a lock screen if you leave the phone open and press the power button (to lock the phone) than press it again (turning the screen back on) while making sure not to use a finger you have set up with fingerprint unlock?
Click to expand...
Click to collapse
Do you see a lock screen if you leave the phone open and press the power button?yes isee the lockscreen
but i wantto see it when i unfold thephone
What do you see when you open your phone?
I see my lock screen with the pin keyboard over it.
_Dennis_ said:
What do you see when you open your phone?
I see my lock screen with the pin keyboard over it.
Click to expand...
Click to collapse
i donthave anylock stuffnopin nothing just swip so wheniunfold the phone it goes right into homescreen without seen lockscreenonly when the phone foldedandim unfold it (goesto homescreen)
I don't think you're going to get what you want. It's a very niche desire you have.
Not many people want to have no protection of their device but still want to have to clear a lock screen stay opening their phone.
_Dennis_ said:
I don't think you're going to get what you want. It's a very niche desire you have.
Not many people want to have no protection of their device but still want to have to clear a lock screen stay opening their phone.
Click to expand...
Click to collapse
i didnt get it ,so why when the phone unfolded and you press power button it goes to lock screen on the big scrren? whats the point?
nosferatu123 said:
i didnt get it ,so why when the phone unfolded and you press power button it goes to lock screen on the big scrren? whats the point?
Click to expand...
Click to collapse
Because, the assumption is if you pick up your phone while closed you'll either use the lock screen on the outside screen or open the device to use it fully.
If you leave it open and less the power button, you want it to lock. It will then show the lock screen of you press the post button again because that's the default behavior. Show lock screen on current screen.
If you unlock the Fold 3 while it's closed then it won't have lock screen when unfolding. Since device is already been unlocked when it was closed. So to avoid this you have to unfold the device first then unlock that way you will see lock screen.