plz guys ! i notice that when i unfold the phone its open without lock screen ?
but i have great lock screen wallpaper i cant see him so how can i unfold the phone and see the lockscreen?
Do you see a lock screen if you leave the phone open and press the power button (to lock the phone) than press it again (turning the screen back on) while making sure not to use a finger you have set up with fingerprint unlock?
_Dennis_ said:
Do you see a lock screen if you leave the phone open and press the power button (to lock the phone) than press it again (turning the screen back on) while making sure not to use a finger you have set up with fingerprint unlock?
Click to expand...
Click to collapse
Do you see a lock screen if you leave the phone open and press the power button?yes isee the lockscreen
but i wantto see it when i unfold thephone
What do you see when you open your phone?
I see my lock screen with the pin keyboard over it.
_Dennis_ said:
What do you see when you open your phone?
I see my lock screen with the pin keyboard over it.
Click to expand...
Click to collapse
i donthave anylock stuffnopin nothing just swip so wheniunfold the phone it goes right into homescreen without seen lockscreenonly when the phone foldedandim unfold it (goesto homescreen)
I don't think you're going to get what you want. It's a very niche desire you have.
Not many people want to have no protection of their device but still want to have to clear a lock screen stay opening their phone.
_Dennis_ said:
I don't think you're going to get what you want. It's a very niche desire you have.
Not many people want to have no protection of their device but still want to have to clear a lock screen stay opening their phone.
Click to expand...
Click to collapse
i didnt get it ,so why when the phone unfolded and you press power button it goes to lock screen on the big scrren? whats the point?
nosferatu123 said:
i didnt get it ,so why when the phone unfolded and you press power button it goes to lock screen on the big scrren? whats the point?
Click to expand...
Click to collapse
Because, the assumption is if you pick up your phone while closed you'll either use the lock screen on the outside screen or open the device to use it fully.
If you leave it open and less the power button, you want it to lock. It will then show the lock screen of you press the post button again because that's the default behavior. Show lock screen on current screen.
If you unlock the Fold 3 while it's closed then it won't have lock screen when unfolding. Since device is already been unlocked when it was closed. So to avoid this you have to unfold the device first then unlock that way you will see lock screen.
Related
Hi,
In general I am very happy with my new TP2, however, I keep forgetting to press the lock button (hold down the call end buttoun until it vibrates) prior to pussing the power button and putting it in the case.
Does anyone know of a way of adding this function to the power button, so that it automatically locks?
richkidd said:
Hi,
In general I am very happy with my new TP2, however, I keep forgetting to press the lock button (hold down the call end buttoun until it vibrates) prior to pussing the power button and putting it in the case.
Does anyone know of a way of adding this function to the power button, so that it automatically locks?
Click to expand...
Click to collapse
If you use S2U2 you get this functionality, I don't know how to do it with normal screen lock.
Dave
Or if you use Throttle Lock you can use a pattern to unlock your device, and you can set it up that when you push the powerbutton it gets locked with the pattern, or that when you push the powerbutton it will wait a x given minutes and then your device get's locked with a pattern.
I don't know how to do it with normal screen lock.
i have this on mine dont know how i got it take it came with some app i have installed
Anyone know how to fix this so that the phone's standard lock autolocks? Tried throttle etc but I still really like the simplicity of the normal phonelock, just need to get it to do it by itself.
Homescreen plusplus (Batterystatus) has this option. You can select lock on standby, it uses normal wm lock app. Used it on my Wizard, not sure if it's compatible with the TP2...
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm
aiaob said:
Anyone know how to fix this so that the phone's standard lock autolocks? Tried throttle etc but I still really like the simplicity of the normal phonelock, just need to get it to do it by itself.
Click to expand...
Click to collapse
Use TouchLockPro as locking utility. Automatically locks at power on and unlocks by light sensor. And you can configure a key unlock sequence. And with a slide to answer solution, you can only lock the hardware keys at incoming call.
if you simply press the power button that switches off the screen and locks all buttons.
uilt-in WM feature.
If you set a password it also automatically locks it
how do you enable ALL BUTTONS UNLOCK ?
in older devices there was an option somewhere in the keys section, now only the power button turns the phone on,. i want all the keys to turn it on, since i use the s2u2...
thanx
otohabibi said:
how do you enable ALL BUTTONS UNLOCK ?
in older devices there was an option somewhere in the keys section, now only the power button turns the phone on,. i want all the keys to turn it on, since i use the s2u2...
thanx
Click to expand...
Click to collapse
When not removed from ROM you will find it as \Windows\keylock.exe
Otherwise try: http://forum.xda-developers.com/showpost.php?p=5875933&postcount=5
I am still looking for auto lock at suspend. I don't want to install a program bringing with it 100.000 functions.
I dont see the point in adding extra features to a lock screen. its there to keep the screen locked and thats it lol
Anyways, try 'lock device GUI'
It just adds the function to lock the device when the power button is pushed (Sleep).
Keeps the old lock screen, only adds function
Yea check out LockDevice. I use it and it works great..
http://forum.xda-developers.com/showthread.php?t=542482
DeviceLock.cab Works As Well...
I had similar issue. So I installed "DeviceLock.cab" and added it as a Quick Link on HCT Sense 2.5 Homescreen. Now I just have to click on the link to lock the device. Once the screen if off the keys don't matter.
Also used "Lock Screen With Bottom Slider" for easy access.
I can't post links, but if you search for quote phrase, you should be able to find a download.
Hope that helps.
Try smartlock. Works perfect! Just install the cab, then it can be found in: Start/Settings/System
http://forum.xda-developers.com/showthread.php?t=505032
Is there a way to change the lock button on the right to more of a soft lock.
every time i hit it, i have to enter my pin in again. so it would be nice if the button acted more like the screen timeout.
Any ideas?
You could turn off your lock password?
I can't. The phone has to be connected to our exchange server, which requires a pin at the minimum.
I don't know if you have owned a blackberry, but if you press the lock button it doesn't require your pin to be entered until a set amount of time, but still sleeps the display and doesn't allow input.
There is an app on the market that may do what your looking for - "Password Delay Full". There is also a free version but I don't know what the differences are, I figure it's better to get the paid one to support the devs!
There is a built in lock delay right?
reocej said:
There is a built in lock delay right?
Click to expand...
Click to collapse
Yes, once your lock is set up go to Settings>Location and Security>Timeout
3bs said:
Yes, once your lock is set up go to Settings>Location and Security>Timeout
Click to expand...
Click to collapse
Yes, with this option you can set delay upto 30 min. for the screen to lock out after it has been turned off.
3bs said:
Yes, once your lock is set up go to Settings>Location and Security>Timeout
Click to expand...
Click to collapse
That doesn't work. It says "Lock screen 'X' minute/s after screen automatically turns off."
That means if you leave your phone there with the screen on, it will lock X minutes after the screen turns off by itself. If you press the lock button, only way to unlock is with passcode. My Sensation didn't do this, hopefully there's an easy option on this phone.
shorty87 said:
That doesn't work. It says "Lock screen 'X' minute/s after screen automatically turns off."
That means if you leave your phone there with the screen on, it will lock X minutes after the screen turns off by itself. If you press the lock button, only way to unlock is with passcode. My Sensation didn't do this, hopefully there's an easy option on this phone.
Click to expand...
Click to collapse
Right, I have the same problem and am looking for a solution. HTC Sense has this working properly, but on Samsung the power key does the full screen off + lock rather than just screen off and let the lock delay lock it.
Very annoying. I'm guessing that a Samsung TW update or a new ROM could fix it.
So I set my phone to use a PIN and to lock 10 minutes after timeout; power button does NOT lock instantly.
For whatever reason when I turn the screen off and turn it back on I need to swipe on the screen but not enter a pin.
In every phone I've ever had turning the screen on before the pin is activated would go straight to my home screen, how do I fix this?
DroidHam said:
So I set my phone to use a PIN and to lock 10 minutes after timeout; power button does NOT lock instantly.
For whatever reason when I turn the screen off and turn it back on I need to swipe on the screen but not enter a pin.
In every phone I've ever had turning the screen on before the pin is activated would go straight to my home screen, how do I fix this?
Click to expand...
Click to collapse
You can't. That actually sounds like a pretty terrible idea to me. The point of at least swipe to unlock is to prevent accidental screen touches if your screen turns on in your pocket.
I have a few home screens on my 5T. If I am at any of the home screen and then the phone is locked, when I swipe to unlock the phone, the phone will show me the same home screen that it was displaying before the phone was locked. I need to press the home button to go to the default home screen.
How can I unlock phone and see the default home screen every time? I mean if the screen was at any of the home screens when the phone gets locked, once I unlock I want it to display the default home screen.
(Note: the default home screen I am talking about is the screen that you see if you press the home button)
Of course the phone shows up the last screen used...
Lmao. The stupid questions people ask now days. I can't believe you created a thread for this.
As the title says it. I'm not complaining or anything but I am kinda tired of pushing my lock button 2 times whenever I am in the dark place and want to unlock my phone with KnockON feature (double tap on the screen). Is there a way to get around that "press lock button 2 times to unlock the phone" or it's something wrong with my phone that is missing that setting?
Would be appreciated for an answer.
What phone model do you have? I only have to press mine once to unlock it.
BOO5TED said:
What phone model do you have? I only have to press mine once to unlock it.
Click to expand...
Click to collapse
It's LM-G710EM
Just increase the screen timeout.
LameMonster82 said:
Just increase the screen timeout.
Click to expand...
Click to collapse
That didn't help. I still can't get it unlocked by double tapping in a dark room.
it's how the phone prevents from accidental unlocks in pocket: when condition is pitch dark, double taps won't work; only with double press the lock button and fingperprint sensor.
superbonto said:
it's how the phone prevents from accidental unlocks in pocket: when condition is pitch dark, double taps won't work; only with double press the lock button and fingperprint sensor.
Click to expand...
Click to collapse
Thanks for the explanation but I was wondering if I can disable that function just for ease of use. Btw fingerprint unlock won't work in the dark either for some reason.