Hello all,
I have an issue that I could really use some input on.
I am currently unable to send a txt message and can't figure out why, but this is what I did.
I went into Phone Testing settings (the #*#* command) and only really looked around. I checked the other band options but put it back to GSM/CDMA auto. I also looked at the Select Bands option and am not sure what it was set to before, but I just chose Auto.
After I did that I am now unable to send txt messages and can't think of anything else I may have done to mess it up. Handscent nor the stock txt app will send, it just fails immediately.
I otherwise have a strong signal and full data connectivity. I tried a baseband restore as well as reinstalling the kernel and that has not restored my sms.
I didn't change any settings in APN and even restored it to default.
I'm using Team KANG milestone 2 and Franco Kernel 14 on WIND in Canada. Everything was working just fine before all of this.
Thanks for the help!
rAy
UPDATE: I also did a CWM restore of a backup I did only an hour or so before this happened and when things were working fine and now I'm getting panic prompts for 'google.process.gapps'. Ideas??
UPDATE 2: Judging from other posts in his thread it COULD be related to the Franco Kernel, he just upped a fix for something. Going to try flashing the old one and then to the newest to see if that helps.
UPDATE 3: It did not, still can't send txt.
I remember reading a post like this before, don't remember if it was fixed or not
Type *#*#4636#*#* in your dialer. Press phone info. Scroll down to smsc and then press refresh then update. See if that works. Otherwise you can manually enter that number. Search for the smsc # for your carrier.
Sent from my Xoom using xda premium
Actually I have solved the mystery!
What I apparently did was delete my SMSC number in the Phone Testing menu by hitting 'Update' next to the box... so I'd advise anyone else not to do it either lol.
I found the code needed for WIND in Canada too in case anyone finds themselves in this situation.
You need to re-enter the SMSC Carrier number. For WIND Mobile Canada, SMSC is 16135009000
Android requires you to enter this info in Hex.
Hex = 07916131059000F0
In the dialpad enter *#*#4636#*#*
Select phone information
Scroll down to SMSC field, enter 07916131059000F0 and done. Then reboot
Click to expand...
Click to collapse
You can find the code to other networks with a search here at XDA, just remember that you apparently need to convert to HEX first.
rAy
PS: I think I was writing mine as you wrote yours, but thanks for the reply El Daddy! That would have saved me if I wasn't so impatient lol
ray2jerry said:
What I apparently did was delete my SMSC number in the Phone Testing menu by hitting 'Update' next to the box... so I'd advise anyone else not to do it either lol.
Click to expand...
Click to collapse
I read here that it is apparently a bug and so may not actually be your fault!
rowanparker said:
I read here that it is apparently a bug and so may not actually be your fault!
Click to expand...
Click to collapse
Not really a bug. The carrier doesn't expect people to know how to go into the service menu and change it themselves. People really shouldn't be randomly hitting buttons that they don't understand what it will do.. Google could have designed the UI better also. It's kind of a huge mess of a design.
jhuynh said:
Not really a bug. The carrier doesn't expect people to know how to go into the service menu and change it themselves. People really shouldn't be randomly hitting buttons that they don't understand what it will do.. Google could have designed the UI better also. It's kind of a huge mess of a design.
Click to expand...
Click to collapse
Did you even read what I posted? I'll quote: "It apparently wipes the SMSC number as soon as you enter the hidden phone settings...". Now, that's not randomly hitting buttons is it? Just viewing a settings menu shouldn't wipe a setting (and, it hasn't before for me on gingerbread, froyo or eclair) so I'd call that a bug.
rowanparker said:
Did you even read what I posted? I'll quote: "It apparently wipes the SMSC number as soon as you enter the hidden phone settings...". Now, that's not randomly hitting buttons is it? Just viewing a settings menu shouldn't wipe a setting (and, it hasn't before for me on gingerbread, froyo or eclair) so I'd call that a bug.
Click to expand...
Click to collapse
That is not true. It only removes the SMSC if you touch the update button. I have been in that menu a lot and have never had it randomly delete my SMSC settings.
jhuynh said:
That is not true. It only removes the SMSC if you touch the update button. I have been in that menu a lot and have never had it randomly delete my SMSC settings.
Click to expand...
Click to collapse
But, I could say that is not true. I didn't touch anything other than the network mode (changing from WCDMA Preferred or GSM auto (PRL)) yet mine got wiped. Just 'cause it didn't happen to you doesn't mean it isn't a bug!
How sure are you that you didn't hit update? It's not intuitive that you are not supposed to do it so you might have done it without thinking. Also, I noticed a lot of tutorials online that tell people to hit update when they shouldn't be doing that.
This is the first I've ever read of this as the most likely cause was that button. Just re-read the first post and there might be a bug in the kernel? Or maybe it's just an Orange thing, but didn't think there was much difference between the different versions of yakju**.
jhuynh said:
How sure are you that you didn't hit update? It's not intuitive that you are not supposed to do it so you might have done it without thinking. Also, I noticed a lot of tutorials online that tell people to hit update when they shouldn't be doing that.
This is the first I've ever read of this as the most likely cause was that button. Just re-read the first post and there might be a bug in the kernel? Or maybe it's just an Orange thing, but didn't think there was much difference between the different versions of yakju**.
Click to expand...
Click to collapse
I'm pretty damn sure I didn't touch that button. I wasn't going anywhere near that setting until I went in the second time after noting I couldn't send texts. I think one thing that should be sorted is the requirement to enter the SMSC in HEX format, that wasn't required on my desire.
SMSC code for AT&T US
The SMSC code for carrier AT&T US is: 07913121139418F0
Once you put the SMSC code in, click update, then refresh and your all set. NO REBOOT / RESTART needed.
therealdamiani said:
The SMSC code for carrier AT&T US is: 07913121139418F0
Once you put the SMSC code in, click update, then refresh and your all set. NO REBOOT / RESTART needed.
Click to expand...
Click to collapse
AWESOME dude you fixed it for me! thanks so much! without even being a jerk about it!
:good::good::good::good::good::good:
Related
Hi there.
When I go into messages app and make a new message I select contact but then the program drops the area code.
However if I go into the people app then select a contact, press the message button then the sms message will go through because it doesn't drop the area code..
So it is sort of annoying that I have to start messages that way. Anyone else have this?
I am running 4.1.1
Thanks
Seth_nexus said:
Hi there.
When I go into messages app and make a new message I select contact but then the program drops the area code.
However if I go into the people app then select a contact, press the message button then the sms message will go through because it doesn't drop the area code..
So it is sort of annoying that I have to start messages that way. Anyone else have this?
I am running 4.1.1
Thanks
Click to expand...
Click to collapse
are you on maguro, toro, or toroplus?
and what ROM and Kernel are you running?
Wolfbeef123 said:
are you on maguro, toro, or toroplus?
and what ROM and Kernel are you running?
Click to expand...
Click to collapse
I am running this in the odexed version.
http://forum.xda-developers.com/showthread.php?t=1737849
My phone said maguro.
Seth_nexus said:
I am running this in the odexed version.
http://forum.xda-developers.com/showthread.php?t=1737849
My phone said maguro.
Click to expand...
Click to collapse
maybe you got a bad flash.
nandroid and rewipe nad reflash. see if it fixes it.
Wolfbeef123 said:
maybe you got a bad flash.
nandroid and rewipe nad reflash. see if it fixes it.
Click to expand...
Click to collapse
I just went back to 4.04 and downloaded the official ota file. Setting it up now.
Seth_nexus said:
I just went back to 4.04 and downloaded the official ota file. Setting it up now.
Click to expand...
Click to collapse
Turns out that did not fix the issue either.
I guess I am just stuck with starting sms from my people app.
i've noticed this too after the ota, seems like the Parentheses around the code confuse it(###)
Grey Ghost said:
i've noticed this too after the ota, seems like the Parentheses around the code confuse it(###)
Click to expand...
Click to collapse
Glad I am not the only one.
I also have this problem. All my contacts have parentheses () as well.
Bill
I'm also experiencing this issue with the ota update on my i9029a
Anyone solve this issue. This is happening for me too
Seth_nexus said:
Hi there.
When I go into messages app and make a new message I select contact but then the program drops the area code.
However if I go into the people app then select a contact, press the message button then the sms message will go through because it doesn't drop the area code..
So it is sort of annoying that I have to start messages that way. Anyone else have this?
I am running 4.1.1
Thanks
Click to expand...
Click to collapse
I have had the same problem for a while now as well. The most convenient solution in my opinion is to edit the contacts by deleting the parenthesis from the number. I realize this can be tedious but at least its a one time fix instead of starting a conversation through the people app every time. I have been editing the contacts on my Gmail on my computer for convenience and then syncing to my phone. Or just keep using your phone like normal and whenever you run into a problem, just go to the contact page real quick and fix it.
I haven't tried the previously proposed solution of performing a factory reset and re-downloading contacts from the google account. I prefer my method since performing a factory reset would be very inconvenient for me.
Does anyone came up with the solution. Been experiencing the same problem also.
Just installed 4.2.2 on my VZW GNex, using a stock, rooted rom.
Now the feature where I could say "Text Bill - Hi I'll be there soon" and it would generate a text message is not working. It correctly translates the text but just does a google search.
Am I missing something or a setting ?
Your help is much appreciated.
How are you attempting to do this so I can try and do it myself? I dont ever start texts that way.
EDIT: Actually, i think its part of Google Now.
Thanks.
Press and hold the mic button so it comes up (from the regular google now) and say
Send Text to xxxxxxxx Please call me back
It should generate a text message.
homemadehitshow said:
Thanks.
Press and hold the mic button so it comes up (from the regular google now) and say
Send Text to xxxxxxxx Please call me back
It should generate a text message.
Click to expand...
Click to collapse
Yeah, I tried it in Google now and it worked.
jsgraphicart said:
Yeah, I tried it in Google now and it worked.
Click to expand...
Click to collapse
mmmm, thanks. Now I'm confused
homemadehitshow said:
mmmm, thanks. Now I'm confused
Click to expand...
Click to collapse
You tried it in Google Now right? Or from your homescreen, if you have the search bar enabled at the top, tap the mic and start speaking. You said tap and hold the mic botton. I dont know what button that is and I wouldnt think to tap and hold it.
Yes that is how I use it. I have found others having the same problem, many others not.
homemadehitshow said:
Yes that is how I use it. I have found others having the same problem, many others not.
Click to expand...
Click to collapse
Hmm. Maybe it has something to do with some settings somewhere. Maybe some kind of sync option that allows it to know your contacts. In all of my google settings for all of my apps, I give Google access to everything. I'm not worried about them stealing my info. lol. So maybe its some odd setting you need to change.
I am open with Google also.
and guess what, all of a sudden it's working.
I wonder if there was a google hiccup sometime or other.
Who knows.
Works perfect for me though. Even I had a problem last night. Apparently it's fixed.
I'm having an issue with my SMS where after a while they will sit in my inbox trying to send but not actually send or fail. I physically have to reboot the phone for them then to send. S-off, rooted running ARHD 10.2. I'm not sure if it's more network related or handset related as I can receive and everything else works solidly.
Anyone else experienced this?
I am running a similar set up like you, im on ATT, I can't say I've had that problem enough to say its a problem..
Obviously your service is good in that particular area?
xavier2k3 said:
I'm having an issue with my SMS where after a while they will sit in my inbox trying to send but not actually send or fail. I physically have to reboot the phone for them then to send. S-off, rooted running ARHD 10.2. I'm not sure if it's more network related or handset related as I can receive and everything else works solidly.
Anyone else experienced this?
Click to expand...
Click to collapse
Have you upgrade the firmware? Check this link http://forum.xda-developers.com/showpost.php?p=54408500&postcount=9592
US users may wish to try the 2.22.1540.3 fw
jmoneste said:
Have you upgrade the firmware? Check this link http://forum.xda-developers.com/showpost.php?p=54408500&postcount=9592
US users may wish to try the 2.22.1540.3 fw
Click to expand...
Click to collapse
Yeh I have upgraded my firmware before flashing 10.2. It's an intermittent problem which is the most annoying thing. In the ARHD post there seem to be at least 2 others with this same issue as well which is strange...
xavier2k3 said:
Yeh I have upgraded my firmware before flashing 10.2. It's an intermittent problem which is the most annoying thing. In the ARHD post there seem to be at least 2 others with this same issue as well which is strange...
Click to expand...
Click to collapse
I had an issue with sms notifications after I installed a custom rom. Then learned that my problem comes from the hearbeat interval settings. I think my carrier uses a custom value (5min is default) and since I changed the rom, their settings have not been pushed to my phone.
Testing several things I came across this app. It will not hurt to try it:
Install an app called "pnf push notification fixer". Is free from store.
Set the heartbeat mobile interval to 3 minutes.
Reboot.
Make sure the value did not change itself
Monitor and see if the problem stays the same.
This maintains the connection alive for me.
Have you checked when you experience the issue if the sms carrier center number removes or changes?
On the dialer press *#*#4636#*#*
Select phone info
Scroll down to smsc and hit refresh. Note the number when working. When it stops, repeat the process and check if the number is diff or was removed. You can also hardcode one there.
jmoneste said:
I had an issue with sms notifications after I installed a custom rom. Then learned that my problem comes from the hearbeat interval settings. I think my carrier uses a custom value (5min is default) and since I changed the rom, their settings have not been pushed to my phone.
Testing several things I came across this app. It will not hurt to try it:
Install an app called "pnf push notification fixer". Is free from store.
Set the heartbeat mobile interval to 3 minutes.
Reboot.
Make sure the value did not change itself
Monitor and see if the problem stays the same.
This maintains the connection alive for me.
Have you checked when you experience the issue if the sms carrier center number removes or changes?
On the dialer press *#*#4636#*#*
Select phone info
Scroll down to smsc and hit refresh. Note the number when working. When it stops, repeat the process and check if the number is diff or was removed. You can also hardcode one there.
Click to expand...
Click to collapse
Was your problem with notifications or actually having the messages send?
xavier2k3 said:
Was your problem with notifications or actually having the messages send?
Click to expand...
Click to collapse
I had a bit of both. The cellphone was not maitaining the network alive fast enough.
I have the same issue.
I've tried what jmoneste wrote, but the problem still persist. SMS keep failing. Everytime I want a message to be sent I have to activate airplane mode and then desactivate en resend the SMS. It's so annoying.
This problems comes from stock rom and now I'm using the Viper One ROM but it still fails.
Has anyone found the solution?
KamixD said:
I have the same issue.
I've tried what jmoneste wrote, but the problem still persist. SMS keep failing. Everytime I want a message to be sent I have to activate airplane mode and then desactivate en resend the SMS. It's so annoying.
This problems comes from stock rom and now I'm using the Viper One ROM but it still fails.
Has anyone found the solution?
Click to expand...
Click to collapse
I too have the sms not sending until put in flight mode and then off it again occasionally. Cant believe that its so common, but theres no fix. My phones completely stock too!
Sooo I got the phone last Thursday and am using it on Verizon. I've had a few issues that I figured I'd throw a thread together incase anyone else has the same...
Known Issues that I have:
"GroupMe" application will not update unless I am in the application and clicking on a specific chat. - Worked on every other phone I have and cant even find anything on this subject on google. If someone sends a message in a chat it will not update or notify me. I have to click on the specific chat for it to update. I've reinstalled the app 3 times and cleared the cache. un-optimized it with battery settings, nothing is working.
Fixed Issues that I have:
Phantom vibration. - Almost like a notification is happening but nothing is showing on the screen. Cant figure out this one for the life of me. I even have a notification log downloaded and it just vibrates away with nothing being logged.
Found out it was Verizon Caller ID app. Apparently it keeps crashing and "starting" over and over again. I disabled notifications on it and the vibration went away!
MMS Cannot be received only sent. - I've gone through this extensively with Verizon support. Tried everything on another thread, switched out sim blah blah blah, finally they have opened a ticket with the engineers and will get back to me in 48 hours.
Works now in default app just not android messages......................................
Anyone else having any other issues?
That's disappointing that there are mms issues. MMS on the U11 using anything but the stock messaging app was a complete ****show. I hope you can get more bands than just 13 as well.
Sent from my Pixel 2 XL using Tapatalk
MMS works fine on my European un-locked (and rooted) U12+. Got one as late as yesterday... Using stock SMS app.
Pr3dict said:
Sooo I got the phone last Thursday and am using it on Verizon. I've had a few issues that I figured I'd throw a thread together incase anyone else has the same...
Known Issues that I have:
MMS Cannot be received only sent. - I've gone through this extensively with Verizon support. Tried everything on another thread, switched out sim blah blah blah, finally they have opened a ticket with the engineers and will get back to me in 48 hours.
Phantom vibration. - Almost like a notification is happening but nothing is showing on the screen. Cant figure out this one for the life of me. I even have a notification log downloaded and it just vibrates away with nothing being logged.
"GroupMe" application will not update unless I am in the application and clicking on a specific chat. - Worked on every other phone I have and cant even find anything on this subject on google. If someone sends a message in a chat it will not update or notify me. I have to click on the specific chat for it to update. I've reinstalled the app 3 times and cleared the cache. un-optimized it with battery settings, nothing is working.
.....................................
Anyone else having any other issues?
Click to expand...
Click to collapse
Someone on Android Central had Verizon block messaging and then re-add it for everything to work. Maybe worth a shot?
Same here... Unlocked US model. Send but not receive texts...
I've done the same, reset, new SIM, swapped Sims etc.
I'll take a look on AC and see if they have something there for a solution... Thanks for the heads-up. Glad I'm not alone.
CJ
I have found that Android messages app doesn't work as you can't select the preferred sim for messages. Having to use stock at the moment.
Somewhere in another thread, there was an adb command I think that set and enforced the default sim slot. Wonder if that would help with your issue, Nestacres? Sorry, I would search myself and link but just checking in on a quick break at work.
Nestacres said:
I have found that Android messages app doesn't work as you can't select the preferred sim for messages. Having to use stock at the moment.
Click to expand...
Click to collapse
Android Messages isn't comiled for usage with Dual-SIM, as Google Nexus/Pixel phones are all Single-SIM devices. If you know how to use adb you cand do the following:
From adb shell run the following command
Code:
adb shell settings put global multi_sim_sms 1
This did the trick on the U11 DUGL as well, and Android Messages could be used and worked just fine. Thanks to @Electronic Punk for pointing that one out to me!
Soooo Got MMS to work on the default app and with Verizon Message +.... Android messages still does not work and that is something many others have said as well....
Very sad.
Pr3dict said:
Soooo Got MMS to work on the default app and with Verizon Message +.... Android messages still does not work and that is something many others have said as well....
Very sad.
Click to expand...
Click to collapse
Pr3dict: did you do anything different other than what you originally posted? I've been on vacation since i got the U12 and haven't called Verizon. I can send everything, but not receive. I can pop the SIM and put it in my iPhone x and the texts just role in immediately...I really want to love this phone! Lol
5m4r7ph0n36uru said:
Android Messages isn't comiled for usage with Dual-SIM, as Google Nexus/Pixel phones are all Single-SIM devices. If you know how to use adb you cand do the following:
From adb shell run the following command
Code:
adb shell settings put global multi_sim_sms 1
This did the trick on the U11 DUGL as well, and Android Messages could be used and worked just fine. Thanks to @Electronic Punk for pointing that one out to me!
Click to expand...
Click to collapse
It actually works great with dual sim, for some reason HTC left out the default SMS sim option out on Oreo (simply doesn't exist in settings.apk anymore) and only left the data one. Fortunately that fix is basically a fire and forget, once it sees a default it has no issue picking between them.
HTC handle it differently on phone and SMS as they have a button for each sim.
Electronic Punk said:
It actually works great with dual sim, for some reason HTC left out the default SMS sim option out on Oreo (simply doesn't exist in settings.apk anymore) and only left the data one. Fortunately that fix is basically a fire and forget, once it sees a default it has no issue picking between them.
HTC handle it differently on phone and SMS as they have a button for each sim.
Click to expand...
Click to collapse
Yeah they handle it quite different. But let's see. Maybe we'll get an overhaul with Android P.
Sent from my HTC U12+ using XDA Labs
cramjammer said:
Pr3dict: did you do anything different other than what you originally posted? I've been on vacation since i got the U12 and haven't called Verizon. I can send everything, but not receive. I can pop the SIM and put it in my iPhone x and the texts just role in immediately...I really want to love this phone! Lol
Click to expand...
Click to collapse
I did everything possible. Even got a new SIM... What seemed to do the trick (and was the last thing I did) was having Verizon block my messages and then unblock them.
Then I could send + receive. Beforehand I could only Send... But beware it does not work with Android Messages.
cramjammer said:
Pr3dict: did you do anything different other than what you originally posted? I've been on vacation since i got the U12 and haven't called Verizon. I can send everything, but not receive. I can pop the SIM and put it in my iPhone x and the texts just role in immediately...I really want to love this phone! Lol
Click to expand...
Click to collapse
How did you first activate your phone? If it's not activated properly on Verizon it can fry your SIM card or cause things to not work.
I first swapped my SIM from my U11 and could not make calls but was able to use internet and send and receive text and mms. But just like the U11, I can only receive MMS on the stock apps like HTC messaging and Verizon message+. Cannot receive MMS on third party apps.
But the proper way to activate the U11 and U12+ is to first register your imei with Verizon then you have to transfer your SIM from a Verizon device that has advanced calling/VoLTE in the settings.
The U12+ does not have any Verizon advanced calling or VoLTE setting so if you just pop a new SIM in without first having it activated on a Verizon advanced calling device, it could cause problems and fry your SIM card.
It sucks but that is the best way to activate it.
Manually attached IMEI to SIM, and toggled messages/on/off on my account.
All is well and working for receiving SMS/MMS on stock messages! It worked immediately...
Thanks for the feedback and discussion everyone.
CJ
In my case, after updating (purely, after RUU) to v1.21.401.3 I have noticed a few times that after picking up the device and "squeezing" I should wake up, scan my face and unlock my smartphone (I have my preferences set) .
But just the few times after "squeezing" the device does not react at all, there is no vibration.
After the traditional unlocking (applying the finger to the fingerpront or pressing the POWER button) the smartphone wakes up properly.
This happens when the smartphone is not used for a long time (deep sleep?).
But this is not the rule.
I also had ONE total reboot.
On the other hand, the update did not improve in the first few months the best inflections of the volume up button (Vol +). Very often you have to press many times "to surprise", and pressing and holding it to turn up in series - is very difficult to achieve
regards
q.
Is anyone else having issues with the youtube app? Im finding it buggy. To be precise: if I start a video and then turn the phone landscape to go into fullscreen, if I then turn back the phone vertical and come out of fullscreen and then try minimise the still playing video it goes a bit haywire, parts of the screen goes grey and I can't minimise the video. Can any replicate?!
Sent from my HTC U12+ using Tapatalk
New issue thats bothering THE CRAP OUT OF ME!!!!
The phone isnt vibrating on incoming calls. I thought I just kept not feeling it or hearing it but nope, the phone literally turns the screen on and it just doesnt vibrate. I don't have battery saver on, and I don't have "Do not disturb" on. Its weird.
sentient85 said:
Is anyone else having issues with the youtube app? Im finding it buggy. To be precise: if I start a video and then turn the phone landscape to go into fullscreen, if I then turn back the phone vertical and come out of fullscreen and then try minimise the still playing video it goes a bit haywire, parts of the screen goes grey and I can't minimise the video. Can any replicate?!
Click to expand...
Click to collapse
I have the same problem. It also happens when I press back on the navigation bar
tdwpkidd said:
I have the same problem. It also happens when I press back on the navigation bar
Click to expand...
Click to collapse
Discovered a slight work around since. It doesn't happen if you go in and out of fullscreen using little button in the bottom right. So it only happens with auto rotation.
Sent from my HTC U12+ using Tapatalk
Hello all. I am using red magic 6 global version 12/128. When i get call, only number seems but not name. The number and name is registered but it does not show the name. How can i fix this? Thank you so much and greetings all.
jirain21 said:
Hello all. I am using red magic 6 global version 12/128. When i get call, only number seems but not name. The number and name is registered but it does not show the name. How can i fix this? Thank you so much and greetings all.
Click to expand...
Click to collapse
After the call name is showing in history and also when i am calling someone its ok, but when i get call it does not show the name
Check permissions. Disable power management.
Clear system cache.
Try clearing app data (make sure contacts are backed up first).
Clear sim toolkit data.
Seems to be a lot of firmware/software glitches with these lines in general though. One reason I avoid them.
blackhawk said:
Check permissions. Disable power management.
Clear system cache.
Try clearing app data (make sure contacts are backed up first).
Clear sim toolkit data.
Seems to be a lot of firmware/software glitches with these lines in general though. One reason I avoid them.
Click to expand...
Click to collapse
I made everyting except power management, now i made it too. Hope it works thank you
Just found out the solution. Im sorry but its soooo stupid. Just turn off the VOLTE and here you go.
jirain21 said:
Just found out the solution. Im sorry but its soooo stupid. Just turn off the VOLTE and here you go.
Click to expand...
Click to collapse
can u help me bro i have the same problem, i turned off VOLTE from mobile networks but my contacts still dont show