anyone know.what the " El29 modem bug fix " is?? im using UNnamed rom with the.el29 modem and just was notified about the ota update.. i might be waaaay behind.idk, but is it safe to download and flash? its 24mb?
Sent from my SPH-D710 using XDA App
It's most likely the Full EL29 update that Sprint is pushing out that removes Carrier IQ from our phones. And no it's not safe to download any OTA if you are rooted it would fail anyways.
ok.. thanx.. ill probly wait and make sure it doesnt take away my 4g hack.or.anything... thanx man!
Sent from my SPH-D710 using XDA App
pewipo123 said:
ok.. thanx.. ill probly wait and make sure it doesnt take away my 4g hack.or.anything... thanx man!
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
It probably wont work anyways since you are not on stock. Since you are running UnNamed like me you are already good...
I put the attached file in system/app folder and rebooted into recovery and wiped cache and dalvlik and have not seen the popup since. Oh yea I ran fix permissions just for good measure. You can also check out this thread here
pewipo123 said:
anyone know.what the " El29 modem bug fix " is?? im using UNnamed rom with the.el29 modem and just was notified about the ota update.. i might be waaaay behind.idk, but is it safe to download and flash? its 24mb?
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Sprint announcement is here.
If I do this update, would it effect my ability to root in the future?
Highly unlikely. However, if you want to be completely safe, root and install a rom with EL29 and also update your modem.
tygger said:
If I do this update, would it effect my ability to root in the future?
Click to expand...
Click to collapse
You have almost nothing to gain from updating to this if you're already rooted...this has been leaked weeks ago already and as far as I can tell it's exactly the same thing.
parkslope said:
Highly unlikely. However, if you want to be completely safe, root and install a rom with EL29 and also update your modem.
Click to expand...
Click to collapse
Just flash Calk's E4GT v2.8.1 Rom... Includes Root, Rogue EL29 kernel, El29 Modem... It's a bad ass Rom!
Here's the link: http://forum.xda-developers.com/showthread.php?t=1332837
Thanks. I went ahead and just rooted. Haven't been following the different ROMs... is Calk's the best?
I also got a question about this. I am on baseband Ek02. I am rooted and have the blazer rom installed. My kernal says El29 and build number says same Gingerbread El29. So when I do get the OTA should I unroot? or just click update?
Thanks,
tygger said:
Thanks. I went ahead and just rooted. Haven't been following the different ROMs... is Calk's the best?
Click to expand...
Click to collapse
This might be up for debate, but I'm gonna say yes. It's the best...
Sent from my SPH-D710 using XDA Premium App
Ind3lible said:
I also got a question about this. I am on baseband Ek02. I am rooted and have the blazer rom installed. My kernal says El29 and build number says same Gingerbread El29. So when I do get the OTA should I unroot? or just click update?
Thanks,
Click to expand...
Click to collapse
EL29 is the most current you should not get the update, if you do try any ota update at this point, it will fail.
Sent from my SPH-D710 using XDA Premium App
playya said:
It probably wont work anyways since you are not on stock. Since you are running UnNamed like me you are already good...
I put the attached file in system/app folder and rebooted into recovery and wiped cache and dalvlik and have not seen the popup since. Oh yea I ran fix permissions just for good measure. You can also check out this thread here
Click to expand...
Click to collapse
I put the file you posted in /system/apps and used TB to freeze system updates, as well as a cache and dalvik wipe with reboot. Am I all set so the update won't install and screw up Calk's rom for me? And get rid of the notifications?
What if your a stock root and want the update? Should I unroot then update and then reroot?
I don't know if this will work so try at your own risk. I read about a recent ota for the epic 4g that the notifications were getting on some people's nerves. Someone brought up the idea and a few people said it worked.
If you are on a custom rom and the ota nag screen pops up, let it update. It will fail and I'm guessing it will try to flash but give you an exclamation mark when trying to update. When you get the mark, pull the battery them put it back in. They are saying in that post that the nag screen will stop appearing after that. I haven't tried it yet because I don't need to. If you do decide to do it, I think it would be a good idea to nandroid before everything and have all the files you need to flash it back to where you want it if something goes wrong. I don't know for sure but I don't think it will brick a phone.
Somebody was asking about cal's 2.8.1. I have the trexcell 3800 battery in the phone now. I did properly break in and condition the battery when I first got it. Here is a screen shot. I went off the charger at 8am and have not been plugged in at all during the day. I used the phone quite a bit too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tygger said:
Thanks. I went ahead and just rooted. Haven't been following the different ROMs... is Calk's the best?
Click to expand...
Click to collapse
Depends on what your taste and personal preferences are. All the ROMs found here are at least as good as the stock ROM.....most are better. For a really awesome appearance and stability with speed and increased battery life I'd recommend Strongsteve's odex blue ROM.
I figured I would ask here instead of making my own thread. Would it be best to download an OTA on a brand new phone and then doing all this rooting and flashing and ROMing? I'm asking because I don't have the phone yet but I'll be doing all this cool stuff as soon as i get it.
A lot of members that went from calk's ROM to the blazer ROM are showing battery improvements, one member even said his tripled. I'm currently using it and couldn't be happier!
Sent from my SPH-D710 using xda premium
Related
After today's system update for my sgs3. I believe it took my root out. I downloaded a free root checker and it said "this device does not have proper root access" I first noticed when I opened mybackup pro and my toolbox wasn't there anymore. I wanted to freeze some more bloatware. What should I do not? Unroot then reroot?
You don't accept system updates from carriers or samsung if your rooted.
incubus26jc said:
You don't accept system updates from carriers or samsung if your rooted.
Click to expand...
Click to collapse
What should I do?
You sit and wait till the devs root the update.
Sent from my SCH-I535 using xda app-developers app
rbarcenaslp said:
What should I do?
Click to expand...
Click to collapse
You're just going to have to wait to see if someone can figure out a way to obtain root on it While you wait, you may want to go read all the things you were supposed to read before you rooted (e.g. warnings in big letters about not taking updates). If you're going to root and play around with the sensitive bits of your phone, its pretty important to know exactly what you're doing. Everything you need to know is here, you just need to read it.
My last two phones have been Motorola and im new to Samsungs.. We used an app called Voodoo OTA Root keeper when there was a new OTA out. MOST of the time it would protect root on an OTA, but, like everything else, it wasnt 100% guarantee. Does anyone know if this app works with Samsung and the GS3?
No it doesnt.. YOU LIVE AND LEARN NOW.
Sent from my SCH-I510 using Tapatalk 2
DROID3R said:
No it doesnt.. YOU LIVE AND LEARN NOW.
Sent from my SCH-I510 using Tapatalk 2
Click to expand...
Click to collapse
Was this in response to my question?
Maybe you can flash stock rom with Odin and start all over if you need root that bad? Otherwise wait
Sent from my SAMSUNG-SGH-I747 using xda premium
What carrier? I hate these forums. A complete mess. The op and everyone else needs to state in the title what carrier they are using. No offense op.
There was another update? :skeptical:
|Trolling with a smile|
last i checked, he can just reroot the phone like he did the first time. they never blocked that as far as i know. I'm assuming your not using a verizon s3.
After today's system update for my sgs3. I believe it took my root out. I downloaded a free root checker and it said "this device does not have proper root access" I first noticed when I opened mybackup pro and my toolbox wasn't there anymore. I wanted to freeze some more bloatware. What should I do not? Unroot then reroot?
Click to expand...
Click to collapse
:what:
Sent from my GS III on 4G LTE
I'm on sprint..I'm not looking to install roms I just wanted to root to remove the bloatware to save battery and the WiFi tether. I never got the tether to work even after watching videos but my battery has been great. I guess I'll wait for an update but I have no idea how to find out if there's an update or not. The gs3 update was just for bugs and security update. So I dont think the firmware or anything changed? Thanks for the help btw I'm new.
Sent from my SPH-L710 using xda app-developers app
rbarcenaslp said:
I'm on sprint..I'm not looking to install roms I just wanted to root to remove the bloatware to save battery and the WiFi tether. I never got the tether to work even after watching videos but my battery has been great. I guess I'll wait for an update but I have no idea how to find out if there's an update or not. The gs3 update was just for bugs and security update. So I dont think the firmware or anything changed? Thanks for the help btw I'm new.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I was rooted before the update but was tired of the dang nag screen...so after reading from others that rooting still works, I accepted the update and re-rooted + flashed update to radio. Everything has been fine.
I think the update took away part of the search functionality that Apple has been squawking about, so I downloaded that file to avoid the issue.
BTW I also had trouble at one point getting WiFi Tether to work, even using recommended profile = Samsung Galaxy Nexus (CDMA/LTE). I deleted, then re-installed and it seems to be working fine.
Now I do have a question about OTA RootKeeper by Project Voodoo. According to the app page on Google Play -
Typical system where the protection won't work:
- HTC Desire
- Samsung Galaxy Spica
- Samsung Galaxy S / SII
but when you look at the app itself, it says that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"Useless with Samsung phones updated via KIES or Odin and older devices using YAFFS filesystems only."
I did not use Odin to update, so I wonder whether this might start working on my Spring SGS3...
Just wondering...
DROID3R said:
No it doesnt.. YOU LIVE AND LEARN NOW.
Sent from my SCH-I510 using Tapatalk 2
Click to expand...
Click to collapse
Actually, i used OTA rootkeeper on my ATT GS3 to protect my root from the dumb search OTA update and it kept mg root alive. Im using stock samsung rom. So for me at least, OTA rootkeeper worked perfect. Just remember to go in the program (i refuse to call them apps), and back up your root before you apply the OTA.
Sent from my SAMSUNG-SGH-I747 using xda premium
Ota rootkeeper in the play store. Get it.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
So I guess that answers my above question that VooDoo does work on the S3... but it will not work if an update is "pushed manually" via Odin?
rbarcenaslp said:
After today's system update for my sgs3. I believe it took my root out. I downloaded a free root checker and it said "this device does not have proper root access" I first noticed when I opened mybackup pro and my toolbox wasn't there anymore. I wanted to freeze some more bloatware. What should I do not? Unroot then reroot?
Click to expand...
Click to collapse
Hello everybody. I've got same problem as thread maker.
What are my available options to access root again?
I'm newbie in Android phones so please explain everything precisely.
s1mpd1ddy said:
Maybe you can flash stock rom with Odin and start all over if you need root that bad? Otherwise wait
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
If i'm not in hurry to get my root back, what am i waiting for and how should i know that it's ready?
To the OP, I am not sure if you are still having issues getting rooted, but I used the method described Here.
like another user posted, I was rooted and was tired of the nagging about updates, so I took the update and forgot to download Voodoo OTA rootkeeper. I used the above method and was able to reroot without a problem. I then used OTA Rootkeeper to maintain root. Havent had an issue since.
Hope this helps
Here is a link to the official ota update to Jellybean
Here is a quick video from qbking on how to install. Special thanks go out to him.
qbking77 said:
Put together a video showing everyone how to manually update to 4.1.1 JB on their Sprint GS3.
Also have a download link there.
How to manually update:
http://www.youtube.com/watch?v=9dsoLJiz2fo
Click to expand...
Click to collapse
http://android.clients.google.com/p...0/eec955eb4a5b.update_SPH-L710_LI3_to_LJ7.zip
mirror
http://www.mediafire.com/file/91127v6z0x7xu85/eec955eb4a5b.update_SPH-L710_LI3_to_LJ7.zip
Thought to post here easy for everyone to find..instead of being in the middle of a thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: if using billards quick back to stock rom/ect. it says this...
billard412 said:
NOTE:: If you are flashing this in preparation of the official jellybean OTA, It is recommended that you flash the misc files listed at the bottom of the post as well to avoid any conflic
################################################################################################### THESE ARE RECOMMENDED IF YOU PLAN ON FLASHING THE OFFICIAL OTA FROM SPRINT
LI3(ICS)- https://rapidshare.com/files/1858214151/==OPTIONAL==ICS_LI3_BOOTLOADER_TZ_FILES.zip
Click to expand...
Click to collapse
DONT FORGET TO "THANKS" IF I HELPED
Thank you sir!!!!
Sent from my SPH-L710 using xda app-developers app
Weird that it is not PALJ7 but will take PBLJ7 all day as official OTA lol
thanks..but it told me update signature failed!
5:30 am..SUCCESS!! Gues it was being temperamental. Thanks Again!
I Love this place!
TransformerX said:
thanks..but it told me update signature failed!
Click to expand...
Click to collapse
you may have a bad download or your not 100% stock
*you cant have root access for it to work*
also this [ROM][RESTORE]~Quick Return to COMPLETE UNROOTED STOCK(NOW WITH FLASH COUNT RESET!!) DOES NOT WORK that i know of ( i tried it, and failed) but i also didnt do
The following files ARE NOT REQUIRED.They are included for any members that requested them.They are bootloaders and other miscellaneous files. However.. THESE ARE RECOMMENDED IF YOU PLAN ON FLASHING THE OFFICIAL OTA FROM SPRINT
LI3(ICS)- https://rapidshare.com/files/1858214...R_TZ_FILES.zip
Click to expand...
Click to collapse
so you can try that first
Reciviing firmware update failed: error 6 no connection when i try. Also the cloud feature in settings says my samsung password is wrong when its not.
Also, would you happen to have the LI3 OTA zip? i have they keyboard issue and i was thinking if i update back to that, and if it installs correctly, my issue will be gone and then i could reupdate jb without issues.
ReapersDeath said:
Reciviing firmware update failed: error 6 no connection when i try. Also the cloud feature in settings says my samsung password is wrong when its not.
Also, would you happen to have the LI3 OTA zip? i have they keyboard issue and i was thinking if i update back to that, and if it installs correctly, my issue will be gone and then i could reupdate jb without issues.
Click to expand...
Click to collapse
(LG8 TO L13) http://android.clients.google.com/p...0/ea5d7d1ce298.update_SPH-L710_LG8_to_LI3.zip
(LG2 TO LG8 )http://android.clients.google.com/p...0/04646f9535b3.update_SPH-L710_LG2_to_LG8.zip
Can this be flashed with stock recovery
Sent from my SPH-L710 using xda app-developers app
budde2 said:
Can this be flashed with stock recovery
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
YES, no changes made, pulled directly from my phone when i got the ota update
Thanks!
Ran the update with CWM without any issues, then flashed the Team Epic Root zip which still works.
HELL YEAH!
hmm, and I called it I said in a previous thread last month that JB would be out for Halloween to give all of us a treat (android candy)! ^^
Amazing this the same Samsung/Sprint I delt with for 2 years with my Samsung Epic 4G, with the slow updates... Where by the time we got Froyo, everyone was getting Gingerbread... And by the time Gingerbread came out... Well... It was older than dirt. To see these improvements with the handling of the S3 is remarkable.
Thanks again for the update link!
Now to bed... It's SILENT HILL day o.o
No need to download all OTAs. Just install one stock unrooted officially signed ROM and then place this on External SD Card then install through stock recovery with Device Status: Normal.
Wish they would have changed the status bar to black but o well super nice thanks for posting
Sent from my SPH-L710 using xda app-developers app
If my idea works to fix keyboard issues people have had, and ends the bug forever thanks to the links you posted me, I will want to marry you lol.
Sent from my SPH-L710 using xda app-developers app
ReapersDeath said:
If my idea works to fix keyboard issues people have had, and ends the bug forever thanks to the links you posted me, I will want to marry you lol.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
hope it works :good:
What's the baseband showing up as for you guys? It's in the about phone section.
jsarella said:
what's the baseband showing up as for you guys? It's in the about phone section.
Click to expand...
Click to collapse
l710vpblj7
Z a p i x said:
Thanks!
Ran the update with CWM without any issues, then flashed the Team Epic Root zip which still works.
HELL YEAH!
hmm, and I called it I said in a previous thread last month that JB would be out for Halloween to give all of us a treat (android candy)! ^^
Amazing this the same Samsung/Sprint I delt with for 2 years with my Samsung Epic 4G, with the slow updates... Where by the time we got Froyo, everyone was getting Gingerbread... And by the time Gingerbread came out... Well... It was older than dirt. To see these improvements with the handling of the S3 is remarkable.
Thanks again for the update link!
Now to bed... It's SILENT HILL day o.o
Click to expand...
Click to collapse
So can I just flash the update file through twrp without wiping anything? Or does something need to be wiped?
Sent from my SPH-L710 using xda app-developers app
EggosEvo said:
So can I just flash the update file through twrp without wiping anything? Or does something need to be wiped?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
twrp may or may not work but you CAN NOT BE ROOTED at the time for it to work
jcwxguy said:
l710vpblj7
Click to expand...
Click to collapse
cool, that's interesting, guess they had a little typo in that press release of theirs!
JSarella said:
cool, that's interesting, guess they had a little typo in that press release of theirs!
Click to expand...
Click to collapse
doesnt surprise me, they had a typo for one of the ota updates for the HTC EVO LTE as well lol
As detailed here ( http://forum.xda-developers.com/showthread.php?t=2140645 ), I got a "Galaxy SII" from Boost Mobile back in Feburary. Apparently I'm in the right forum for this device. The stock rom on this thing has a lot of issues, so I wanted to replace it with a good Cyanogenmod build. It hasn't been rooted or otherwise tampered with yet, and I have the latest OTA update. What's the safest way to put cyanogenmod on here?
yanom said:
As detailed here ( http://forum.xda-developers.com/showthread.php?t=2140645 ), I got a "Galaxy SII" from Boost Mobile back in Feburary. Apparently I'm in the right forum for this device. The stock rom on this thing has a lot of issues, so I wanted to replace it with a good Cyanogenmod build. It hasn't been rooted or otherwise tampered with yet, and I have the latest OTA update. What's the safest way to put cyanogenmod on here?
Click to expand...
Click to collapse
just like a sprint one... root it from this guide and then follow this guide to get 10.1 or atleast a version of it... there are no official cyanogenmod builds for this phone.
Double check your model number before you flash anything, if you don't have an Epic Touch you may bork your phone.
By the way there's nothing safe about cyanogenmod, just follow the threads and read the posts, especially the ones that start with "help".
Pp.
From my Epic Touch full of Xparent Blue Tapatalk 2.
eisawi99 said:
just like a sprint one... root it from this guide and then follow this guide to get 10.1 or atleast a version of it... there are no official cyanogenmod builds for this phone.
Click to expand...
Click to collapse
oh, so root is required in order to flash roms? I was under the impression that this "Odin" tool could flash roms directly. Anyway... is cyanogenmod not a good rom for this phone? What is?
That's up to you my friend
Laughing at you while eating Jellybeans
yanom said:
oh, so root is required in order to flash roms? I was under the impression that this "Odin" tool could flash roms directly. Anyway... is cyanogenmod not a good rom for this phone? What is?
Click to expand...
Click to collapse
odin can only flash stock roms... but its a helpful tool. if you every softbrick your phone its the easiest way to fix it
yanom said:
oh, so root is required in order to flash roms? I was under the impression that this "Odin" tool could flash roms directly. Anyway... is cyanogenmod not a good rom for this phone? What is?
Click to expand...
Click to collapse
Only stock roms for odin but it does more than roms modems, kernel, etc. Root is needed to flash through recovery and the best rom is up to you we all like different stuff but one thing we will keep doing is flashing roms
Sent from my SPH-D710 using xda app-developers app
eisawi99 said:
just like a sprint one... root it from this guide and then follow this guide to get 10.1 or atleast a version of it... there are no official cyanogenmod builds for this phone.
Click to expand...
Click to collapse
ok, so I followed the first guide up to the point where I now have "AGAT recovery" on my phone. Is this like the Clockworkmod Recovery I used to have on my EVO 4G? Meaning I can just put roms like cyanogenmod or similar on the sd card and install through AGAT recovery?
no i recomend you root with agat and then flash el29 directboot safe recovery to flash the rom
eisawi99 said:
no i recomend you root with agat and then flash el29 directboot safe recovery to flash the rom
Click to expand...
Click to collapse
I can't seem to find this "el29 directboot safe recovery" anywhere. How do I get it? It's a superior replacement for AGAT recovery I presume? I read somewhere that "safe recovery" is required to avoid brick on the Epic 4g touch. Can anyone fill me in on this?
yanom said:
I can't seem to find this "el29 directboot safe recovery" anywhere. How do I get it? It's a superior replacement for AGAT recovery I presume? I read somewhere that "safe recovery" is required to avoid brick on the Epic 4g touch. Can anyone fill me in on this?
Click to expand...
Click to collapse
here is the recovery
Once you flash el29, wipe data, and flash CM. And imho, CM is a very reliable build, but they are many other TW and AOSP builds now that are pretty freaking awesome as well.
Sent from my SPH-D710 using xda premium
eisawi99 said:
here is the recovery
Click to expand...
Click to collapse
AAAhhh, thanks. I just run that from the Windows desktop with my phone plugged in? What makes it safer than AGAT recovery anyway?
also, my phone runs android 4.0.4. This means that I should use the CM9 rom, correct? I've seen warnings about ICS/JB incompatibilities regarding the modem or something.....
yanom said:
AAAhhh, thanks. I just run that from the Windows desktop with my phone plugged in? What makes it safer than AGAT recovery anyway?
also, my phone runs android 4.0.4. This means that I should use the CM9 rom, correct? I've seen warnings about ICS/JB incompatibilities regarding the modem or something.....
Click to expand...
Click to collapse
You can flash CM 10 or 10.1, just keep your ICS modem. And EL26 is safest do to the emmc bug. But Agat's should be fine, but almost all devs insist on a safe recovery, and I'd listen to them
Sent from my SPH-D710 using xda premium
eisawi99 said:
here is the recovery
Click to expand...
Click to collapse
I started up that EXE on my computer with my phone plugged in, and I get this interface:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not much happens when I press start, as you can see. What should I put in those boxes?
or, is this the only way to get a safe recovery? Are there others besides this EL29 CWM?
your phone is in odin mode right? also start the program then plug in your phone.
eisawi99 said:
your phone is in odin mode right? also start the program then plug in your phone.
Click to expand...
Click to collapse
ooh, that's the problem(s). Should be automated from there right?
yea
eisawi99 said:
yea
Click to expand...
Click to collapse
Success! I got Cyanogenmod running on this thing! Thanks everyone!
It's a bit bloated tho; I'll have to search around for some leaner roms. Are there any optimized for battery life like ther were for the EVO 4g?
any time man
It's finally here. Downloading from NYC. 695mb
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-P600 using Tapatalk
Enjoy.....g
wilsonhuang said:
It's finally here. Downloading from NYC. 695mb
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Can we get a screen shot of your "About device page... expecially the baseband and kernel versions... build also if possible.
Can someone let us know if the update fixes the stupid screen rotation bug when you turn off auto-brightness. Also, if there is a noticeable change in overall snapiness. Thanks!
jfkerekes said:
Can we get a screen shot of your "About device page... expecially the baseband and kernel versions... build also if possible.
Click to expand...
Click to collapse
It's up sir!
Sent from my SAMSUNG-SGH-I317 using Tapatalk
General noob question:
How would I go about rooting 4.3 for AT&T? Can someone point me to the thread of it exists? Yes I've tried the search function and no nothing exact came up. I don't want to mess up and then be "that guy" on here crying about making a noob mistake.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Jspex said:
General noob question:
How would I go about rooting 4.3 for AT&T? Can someone point me to the thread of it exists? Yes I've tried the search function and no nothing exact came up. I don't want to mess up and then be "that guy" on here crying about making a noob mistake.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
See Dr. Ketan and his thread regarding the bootloader on 4.3.....g
Will you be able to go back to 4.1.2 if you take this update?
gregsarg said:
See Dr. Ketan and his thread regarding the bootloader on 4.3.....g
Click to expand...
Click to collapse
But that's a thread specifically for 7100-based (non-LTE) variants, right? Whereas we have n7105-based LTE Versions...if I'm missing something please let me know. TIA.
Keeping root after 4.3 update
Jspex said:
General noob question:
How would I go about rooting 4.3 for AT&T? Can someone point me to the thread of it exists? Yes I've tried the search function and no nothing exact came up. I don't want to mess up and then be "that guy" on here crying about making a noob mistake.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I rooted using this method while still on 4.1.2 and it worked flawlessly.
I then paid for and installed SuperSU Pro and activated "Survival Mode"
Lastly, after the OTA update was COMPLETELY finished, I followed this simple procedure to get root back again.
SuperSU disables Knox for you on 4.3 which is also nice. I should have qualified here that I am COMPLETELY stock other than root. I have not "frozen" any apps., deleted any Samsung provided files, etc. and I have stock bootloader and stock recovery. This will likely NOT work if you have done any of those things.
Is there a flashable version of this? If not, can somebody make one? Thanks.
I'm running a custom rom and rollouts/updates from vendors freak me out because I don't trust not one of them. Knowing AT&T they have thrown in some bit of encryption that locks the bootloader. I understand this might not be the case this time but I do know none of them can be trusted.
Now if you excuse me, I'm 1/2 done with 1984 the book and my tin foil hat is making me itch.
Guys I need help I am stuck, I am using unlock att with tmobile, I check software update but it days interrupted, and I even tried with kies but it's not connecting at all, I tried 2 pcs.... Any help... What to do to update it... Please
Sent from my SAMSUNG-SGH-I317 using Tapatalk
rsalan said:
Is there a flashable version of this? If not, can somebody make one? Thanks.
Click to expand...
Click to collapse
The update has only been out for a few hours and we are asking for .zip files already ??
Sheesh...
Give the devs some time to pull it apart and clean it up...unless you would like Knox and a bootloader lock ??
gregsarg said:
the update has only been out for a few hours and we are asking for .zip files already ??
Sheesh...
Give the devs some time to pull it apart and clean it up...unless you would like knox and a bootloader lock ??
Click to expand...
Click to collapse
amen! Preach it my brethren
sent from my sgh-i317 using sky blue tapatalk
marckusdavis said:
I rooted using this method while still on 4.1.2 and it worked flawlessly.
I then paid for and installed SuperSU Pro and activated "Survival Mode"
Lastly, after the OTA update was COMPLETELY finished, I followed this simple procedure to get root back again.
SuperSU disables Knox for you on 4.3 which is also nice.
Click to expand...
Click to collapse
I have a few questions for you and/or those more in the know:
If I were to do this same thing, would I be able to flash a custom recovery (like TWRP) and/or flash custom ROM's/Kernels like I can already do now? One of my main concerns is that the stock kernel doesn't support Boeffla Sound, and that really makes for better audio on this device...might as well take full advantage of that Wolfson DAC...
I have to admit, it would be nice to be able to use pure AT&T stock, but rooted, as a base...this is why I loved the old CleanROM AT&T SE so much...
TIA for any guidance you can give on this.
Side note: after ODIN'ing back to 4.1.2 MA4, it says I have a 741MB update I can take....I'm sure that's this 4.3 update...Culpeper, VA here.
marckusdavis said:
I rooted using this method while still on 4.1.2 and it worked flawlessly.
I then paid for and installed SuperSU Pro and activated "Survival Mode"
Lastly, after the OTA update was COMPLETELY finished, I followed this simple procedure to get root back again.
SuperSU disables Knox for you on 4.3 which is also nice.
Click to expand...
Click to collapse
I did the same as marchusdavis but it resulted in a total disaster. After I downloaded the OTA update from AT&T I restarted my phone and it installed through CWM-Touch. At the end it asked if I wanted to ensure root was maintained and of course I said "yes" there (as well as through my SuperSU Pro Survival Mode). When it booted, my WiFi no longer works AND I lost root.
If anyway has any advice on how to get to a stock 4.3 from here please let me know!
Ugh, having trouble updating atm.
Goes up to 30%, then my phone reboots and says
"The update was interrupted" or something like that
On stock 4.1.2 rooted with stock recovery if anyone can help.
chris.l.naish said:
I have a few questions for you and/or those more in the know:
If I were to do this same thing, would I be able to flash a custom recovery (like TWRP) and/or flash custom ROM's/Kernels like I can already do now? One of my main concerns is that the stock kernel doesn't support Boeffla Sound, and that really makes for better audio on this device...might as well take full advantage of that Wolfson DAC...
I have to admit, it would be nice to be able to use pure AT&T stock, but rooted, as a base...this is why I loved the old CleanROM AT&T SE so much...
TIA for any guidance you can give on this.
Side note: after ODIN'ing back to 4.1.2 MA4, it says I have a 741MB update I can take....I'm sure that's this 4.3 update...Culpeper, VA here.
Click to expand...
Click to collapse
I don't believe so, as I am completely stock, bootloader and all. If you want to install other ROMs, you'd need to use a different method I believe. Likely downloading this update either via Kies or something else, and use ODIN to do everything. If you search around a bit on XDA, you'll probably find someone who has done it successfully and posted how. While I like custom ROMs, I have not had a need to use one yet on this device. However, if Samsung doesn't eventually give us Air Command, that might be enough to make me try it!
Is it possible to get the official update from the leak or do I have to downgrade to 4.1.2? I tried updating from the leak but it said it's the latest version.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Does anyone have any info on downgrading from OH1? I've yet to see any info on it, though it is apparently the latest modem for this phone, and quite frankly, it blows. I tried dropping to the MD4, and lost my MEID and things. Thankfully I had a modem backup and it worked coming back, but man, I hate that I can't update my data profile on AICP and none of the Touchwiz roms list compatibility with this new modem.
I'm new to the Samsung scene and all this extra crap I couldn't do with other devices is confusing as hell at 1am and no sleep or coffee. I know OH1 is what was there after the Stagefright update, but it may have been there when I bought the phone. Ideas and suggestions would be awesome on getting back to stock or switching to TW without losing service programming.
Please keep in mind I don't have a PC but I do have Mobile ODIN and the latest TWRP.
DaemeonZane said:
Does anyone have any info on downgrading from OH1? I've yet to see any info on it, though it is apparently the latest modem for this phone, and quite frankly, it blows. I tried dropping to the MD4, and lost my MEID and things. Thankfully I had a modem backup and it worked coming back, but man, I hate that I can't update my data profile on AICP and none of the Touchwiz roms list compatibility with this new modem.
I'm new to the Samsung scene and all this extra crap I couldn't do with other devices is confusing as hell at 1am and no sleep or coffee. I know OH1 is what was there after the Stagefright update, but it may have been there when I bought the phone. Ideas and suggestions would be awesome on getting back to stock or switching to TW without losing service programming.
Please keep in mind I don't have a PC but I do have Mobile ODIN and the latest TWRP.
Click to expand...
Click to collapse
Can't downgrade firmware, you can use any OD2 or OH1 Touchwiz ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bilgerryan said:
Can't downgrade firmware, you can use any OD2 or OH1 Touchwiz ROM.
Click to expand...
Click to collapse
Except there aren't any that I can find. The latest ones all show something other than OD2 and OH1. I assume I'm stuck with AICP for just that reason, which is crap because I can't revert to a stock TouchWiz OD2 that doesn't seem to exist. I haven't got a PC on my truck so I can't use Kies to get it back to actual stock. I suppose I'm screwed then.
Edit: I've seen plenty of s4 and up OD2 and OH1 roms but nothing for the S3. I know it's old as hell but damn, it's still a fairly solid phone.
Sent from a Potato using Kung-Fu
DaemeonZane said:
Except there aren't any that I can find. The latest ones all show something other than OD2 and OH1. I assume I'm stuck with AICP for just that reason, which is crap because I can't revert to a stock TouchWiz OD2 that doesn't seem to exist. I haven't got a PC on my truck so I can't use Kies to get it back to actual stock. I suppose I'm screwed then.
Edit: I've seen plenty of s4 and up OD2 and OH1 roms but nothing for the S3. I know it's old as hell but damn, it's still a fairly solid phone.
Sent from a Potato using Kung-Fu
Click to expand...
Click to collapse
Oops, my bad... I thought this was the S4 forum (the latest update is also OH1)... You need to use an ND8 or NJ2 ROM. I have 2 of them for the S3 in the Android Development section.
Same situation kind of...
I too had done the ota update to oh1 on my s3 and the modem turned to crap. I rerooted and installed wicked s5 xperience 2.2. used the flash directions except I used twrp no issues at all dirty flash and then clean flash. Modem works way better... I get signal in places I didn't have before.
i got the same problem
hi, could you tell me which room should i use, posting the link or something. l710vpudoh1, you meant this one SPH-L710_ND8_Full Restore_UNROOTED (Compressed Archive).exe (Resets user data). cuz im in 4.4.2 and i dont know if this is gonna work.
neo_on3 said:
hi, could you tell me which room should i use, posting the link or something. l710vpudoh1, you meant this one SPH-L710_ND8_Full Restore_UNROOTED (Compressed Archive).exe (Resets user data). cuz im in 4.4.2 and i dont know if this is gonna work.
Click to expand...
Click to collapse
www.sammobile.com
bilgerryan said:
www.sammobile.com
Click to expand...
Click to collapse
Sammobile, does it have triband s3 firmware?
Sent from my SPH-L710T using XDA Free mobile app
hilla_killa said:
Sammobile, does it have triband s3 firmware?
Sent from my SPH-L710T using XDA Free mobile app
Click to expand...
Click to collapse
It's one click away [emoji6]
Well yea i know its a click away!! Just when i type l710t nothing, d2refreshspr nothing, my model dont pop up. Was wondering if someone knew thats all! Thanks???
Sent from my SPH-L710T using XDA Free mobile app
hilla_killa said:
Well yea i know its a click away!! Just when i type l710t nothing, d2refreshspr nothing, my model dont pop up. Was wondering if someone knew thats all! Thanks???
Sent from my SPH-L710T using XDA Free mobile app
Click to expand...
Click to collapse
I know they have the triband S4 (L720T), sorry just figured they would have the L710T as well.
bilgerryan said:
I know they have the triband S4 (L720T), sorry just figured they would have the L710T as well.
Click to expand...
Click to collapse
Thanks yea unless i need to type something else or maybe they don't bother with it
Sent from my SPH-L710T using XDA Free mobile app
I returned my s3 to non-rooted stock NJ2 using Odin and it updated to OH1. I don't have service but want to activate it on RIngPlus. I am having this issue where the display flashes off and power button does not respond as it is supposed to. Wondering if a flash to a different rom will fix it. The problem is not new though. Even when drawing the pattern to unlock screen will go off.