I'm trying to access and change the diagnostic info for this phone, but none of the Samsung codes from other phones and versions of Nexus seem to work. Does anyone have this? Or does a diag mode even exist for this phone?
I'm still trying to access the phoneutil/diag mode on this. Anyone have any ideas? I have one with me if anyone would like me to try anything.
Sent from my Galaxy Nexus using XDA App
I'm trying to find it myself, any luck?
So... does *#*#4636#*#* work/is it what you're looking for?
FredFS456 said:
So... does *#*#4636#*#* work/is it what you're looking for?
Click to expand...
Click to collapse
That just for testing mode. Its need diagnostic mode for flashing to another carrier
ODIN mode
alexander_ekin said:
That just for testing mode. Its need diagnostic mode for flashing to another carrier
Click to expand...
Click to collapse
If by flashing you mean the famous samsung ODIN mode then there are couple of threads in development section.
Hit THANKS if I helped
Related
Does anyone know how to put the G Nexus Jelly Bean in Diagnostic Mode, like for flashing it for another carrier, you know, QPST, and all that stuff.
I really need it, like 2 weeks ago i bought a GN and its f*cking awesome, just flashed Jelly Bean, and i cant get it into DIAG Mode.
By the way, ,the following doesnt work:
*#*#8778#*#*
*#*#DIAG#*#*
##DIAG#
##8778#
Anything else?
Damian8a said:
Does anyone know how to put the G Nexus Jelly Bean in Diagnostic Mode, like for flashing it for another carrier, you know, QPST, and all that stuff.
I really need it, like 2 weeks ago i bought a GN and its f*cking awesome, just flashed Jelly Bean, and i cant get it into DIAG Mode.
By the way, ,the following doesnt work:
*#*#8778#*#*
*#*#DIAG#*#*
##DIAG#
##8778#
Anything else?
Click to expand...
Click to collapse
Have you tried the default Android testing menu?
*#*#4636#*#*
*#*#INFO#*#*
Ok, I flashed the Cyanogenmod 9.0 and the *#*#DIAG#*#* actually worked, i get into the menu that let me select between PDA and CDMA MODEM conection.
BUT!! It kinda doesnt connect like a Samsung Modem or anything like that, it shows me two new devices in the Device manager:
1) In the modems it shows a "VIA Telecom USB Modem"
2) In the Other devices shows "INTF2"
And when I try to connect it to DFS or QPST it doesnt work.
Im shure i need some drivers or something, but i dont know which ones.
Any clue?
Damian8a said:
Ok, I flashed the Cyanogenmod 9.0 and the *#*#DIAG#*#* actually worked, i get into the menu that let me select between PDA and CDMA MODEM conection.
BUT!! It kinda doesnt connect like a Samsung Modem or anything like that, it shows me two new devices in the Device manager:
1) In the modems it shows a "VIA Telecom USB Modem"
2) In the Other devices shows "INTF2"
And when I try to connect it to DFS or QPST it doesnt work.
Im shure i need some drivers or something, but i dont know which ones.
Any clue?
Click to expand...
Click to collapse
Oi, hit thanks instead of reply. O well.
I doubt you'll be able to 'flash' the phone for any other carriers through any menu available through the device itself, if that's what you're intending to do.
JaiaV said:
Oi, hit thanks instead of reply. O well.
I doubt you'll be able to 'flash' the phone for any other carriers through any menu available through the device itself, if that's what you're intending to do.
Click to expand...
Click to collapse
Well Its just matter of changing the MSL and the PRL and modifiying the Data parameters and sh*t like that.
And Ive done that like a thousand times with several HTC's Samsungs and Motorolas(Thats actually my second job, seriouslly, i get paid for doing this), I just need to connect it in diag mode and have the drivers.
Which is beeing really hard to do right now
Obviously using my laptop to change the parameters
Same problem
I have been struggling with the same problem for 2 weeks. Have any one found an answer. Can use 'better cut' to write prl, however can use qpst to make internet work.
marjohn1000 said:
I have been struggling with the same problem for 2 weeks. Have any one found an answer. Can use 'better cut' to write prl, however can use qpst to make internet work.
Click to expand...
Click to collapse
Uhh, Well I found an answer, but its not a solution yet.
Check out this thread http://forum.xda-developers.com/showthread.php?t=1696621
It explains why we can't use QPST...
Well it actually doesnt dierctly explain, but we have VIA Chpisets on our phones, instead of the common Qualcomm Chipset, who owns QPST.
But it also give some instructions about a program for VIA chipsets, ETS i think.
I was also reading in a Droid Charge thread (also VIA chipset) that there is a programm named VPST and VPCT or something like that, its like the "QPST" of the "VIA telecom" chipsets.
I'll try it tonight.
Is your gnex Sprint or Verizon?
Have you tested? Did you get it working? I tried but 'getprop' not showing my MSL code.
marjohn1000 said:
Have you tested? Did you get it working? I tried but 'getprop' not showing my MSL code.
Click to expand...
Click to collapse
I've just made the MSL change to 000000, and switched the PRL to my carrier, but just that. I havent had time to work on anything else.
Is your nexus Verizon or Sprint?
If its Verizon your MSL is already 000000, if its Sprint you can get the MSL code with a script made by Viperboy
Damian8a said:
I've just made the MSL change to 000000, and switched the PRL to my carrier, but just that. I havent had time to work on anything else.
Is your nexus Verizon or Sprint?
If its Verizon your MSL is already 000000, if its Sprint you can get the MSL code with a script made by Viperboy
Click to expand...
Click to collapse
I have a Srint. Searching for ViperBoy now.
has there been more progress on this? would love to update prl on cm10
jaron7_11 said:
has there been more progress on this? would love to update prl on cm10
Click to expand...
Click to collapse
Dont know man, I dont have the Nexus anymore, but for the PRL updating theres an app that makes shortcuts, I cant remember the name right now, i think it something like bettercut or something like that.
You can also flash an ICS rom and update the PRL like you would normally do.
Hope i helped
Im flashing the sprint galaxy nexus to boost mobile and need to access the Phone Utility Menu (UART/USB Modem & PDA Selection). i have no idea what the dialer code is. Anything from you guys?
Nothing? Please I really need this
Sent from my Nexus 7 using Tapatalk 2
how about telling what you actually want to do? as what you write makes no sense to me
atifsh said:
how about telling what you actually want to do? as what you write makes no sense to me
Click to expand...
Click to collapse
Im flashing the sprint galaxy nexus to boost mobile and need to access the Phone Utility Menu (UART/USB Modem & PDA Selection)
Anything
CooLoserTech said:
Anything
Click to expand...
Click to collapse
Gnex doesn't work the same way as the other samsung phones that use the qualcomm chipset, No one has successfully gotten data working on any of the other CDMA carriers yet... check out the VIA chipset (used in the Gnex) thread in the general section for more info and to talk to the guys who are working on this,..
pdxtechdoctor said:
Gnex doesn't work the same way as the other samsung phones that use the qualcomm chipset, No one has successfully gotten data working on any of the other CDMA carriers yet... check out the VIA chipset (used in the Gnex) thread in the general section for more info and to talk to the guys who are working on this,..
Click to expand...
Click to collapse
I know for a fact its possible as shown here
http://www.boostberryconvert.com/
once i get to change it to MODEM mode im home free
pdxtechdoctor said:
Gnex doesn't work the same way as the other samsung phones that use the qualcomm chipset, No one has successfully gotten data working on any of the other CDMA carriers yet... check out the VIA chipset (used in the Gnex) thread in the general section for more info and to talk to the guys who are working on this,..
Click to expand...
Click to collapse
Well, do you know anybody that got voice and text working? Once i get that working i know how to get the rest
Im giving the via chipset way a shot.
a windows program called efs professional will trigger that menu for ya mate, simply open efs professional and after the adb identifies your phone click the Samsung tools tab then click the drop down menu under Phone Service Apps, select PhoneUtil (Newer Devices) and click launch.
Heres the link to the program
http://forum.xda-developers.com/gal...ol-updated-09-06-14-efs-professional-t1308546
Hello People,
I have an R530 i trought that it was an normal galaxy s 3 and rooted with normal odin and patch files of i9300 and then i checked that it was
R530.
Now i have following problems the phone is stuck on samsung logo i can enter into download mode i have tried samsung Qcom toolkit but it asks me to enable usb debugging but i cant enable it caurse phone is not starting into normal mode.
i have searched alot and then after posted here.
so i m looking for a solution i just want that the phone comes into normal state i hope you guys can help?
Looking forward for replies..
with best regards,
hanikhurana
Well wtf is R530? But you mentioned the I9300 which is the international gs3. You may want too start looking in the international forum.
Sent from Pluto.
hanikhurana said:
Hello People
I have an R530 i trought that it was an normal galaxy s 3 and rooted with normal odin and patch files of i9300 and then i checked that it was
R530.
Now i have following problems the phone is stuck on samsung logo i can enter into download mode i have tried samsung Qcom toolkit but it asks me to enable usb debugging but i cant enable it caurse phone is not starting into normal mode.
i have searched alot and then after posted here.
so i m looking for a solution i just want that the phone comes into normal state i hope you guys can help?
Looking forward for replies.
with best regards,
hanikhurana
Click to expand...
Click to collapse
US CELLULAR RIGHT? I think you want this. Flash in Odin http://www.wildthingsgrow.com/olvis/rwdump/ROM/Samsung_R530__Galaxy S III_LG1.zip
And do some reading. Were far from the i9300. You got lucky
Speedin07si said:
Well wtf is R530? But you mentioned the I9300 which is the international gs3. You may want too start looking in the international forum.
Sent from Pluto.
Click to expand...
Click to collapse
But good idea sending a US variant of the phone to go look in the intl' section for stuff to flash. Sure a doorstop will help the op a whole lot SMDH. Why couldn't they have made this phone the same all over like the note ii? The bricks r outrageous lately I swear
thanks for reply ,
Yes it is US variant i m downlading the file and will try & report it if worked.
wbr ,
hanikhurana
a big thanks to billard412 .
i flashed the firmware file with odin.
and the phone is working now in normal state.
thank you very much
regards,
hanikhurana
HEY guys I have the note n900t. I am trying to get the Diag mode to work. I tried ##3424# and *#7284#. I have stock rooted 4.3. Does anyone know what rom, and a link please, I need for Diag mode?
Also does anyone have the script to get the msl as well. Yes I know it's gsm but Im pretty sure it's going to prompt me for that as well. I bought a note 3 with imei issues and would like to fix it.
Thank You
Update *#9090# pulls up the diag menu
Sent from my SM-N900T using XDA Premium 4 mobile app
Blank?!?
roketteere said:
Update *#9090# pulls up the diag menu
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Why is it that when i input this code my screen comes up blank?
btw I'm fully stock and unrooted.
Thanks
fouxhound said:
Why is it that when i input this code my screen comes up blank?
btw I'm fully stock and unrooted.
Thanks
Click to expand...
Click to collapse
What kind of phone is it?
Sent from my SM-N900T using Tapatalk
roketteere said:
What kind of phone is it?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
SM-N900T
White galaxy note 3 T-mo
because you lost your imei, and your baseband.
check and see.
have you tried to unlock or change the imei?
No, I've never messed with it. Even my wife's note 3 does the same.
fouxhound said:
Why is it that when i input this code my screen comes up blank?
btw I'm fully stock and unrooted.
Thanks
Click to expand...
Click to collapse
I got the same results. My note 3 is from tmobile and white, and my IMEI and baseband are okay.
Sent from my SM-N900T using XDA Premium 4 mobile app
Ditto
parusia said:
I got the same results. My note 3 is from tmobile and white, and my IMEI and baseband are okay.
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I see the same screen just says diag config and nothing. I'm on the CNB4 firmware still though. I upgraded to the DNE6 but realized too late that I wouldn't be rooted and couldn't find a root solution quick enough so I just restored a backup via TWRP. Yes it does work, I have seen skepticism in the forums about TWRP Restores.
OP As for wanting help reaching the DIAG Menu, what Diagnostic are you trying to get to? You may want to visit this thread http://forum.xda-developers.com/showthread.php?t=2754957 About the hidden service menu. They list alot of dial codes that you may could use to accomplish your task.
USB Diag mode
Veritas Ent said:
I see the same screen just says diag config and nothing. I'm on the CNB4 firmware still though. I upgraded to the DNE6 but realized too late that I wouldn't be rooted and couldn't find a root solution quick enough so I just restored a backup via TWRP. Yes it does work, I have seen skepticism in the forums about TWRP Restores.
OP As for wanting help reaching the DIAG Menu, what Diagnostic are you trying to get to? You may want to visit this thread http://forum.xda-developers.com/showthread.php?t=2754957 About the hidden service menu. They list alot of dial codes that you may could use to accomplish your task.
Click to expand...
Click to collapse
thanks for the link. I was able to get the service menu screen, but i can't seem to find how to put the device on diag mode.
Diag mode?
fouxhound said:
thanks for the link. I was able to get the service menu screen, but i can't seem to find how to put the device on diag mode.
Click to expand...
Click to collapse
Same here. Were you ever able to get this figured out? I can't seem to get to diag mode in any way.
Diagnostic aka diag
VirtualTed said:
Same here. Were you ever able to get this figured out? I can't seem to get to diag mode in any way.
Click to expand...
Click to collapse
What specifically are you trying to get a diagnostic of? Do you want the screen that allows you to do all the hardware tests? Do you want the menus that allow you to change internal settings? Which diag menu / mode are you trying to reach?
Hi,
I had a bricked Desire HD on which I gave for JTAG (restoring hboot). However, after the JTAGging process, my mobile signals had gone and I noticed that the IMEI number was different on the firmware from the one written on the mobile box and the back of my phone, is there any way to repair restore it? I will be very thankful
same problem
coolyahya said:
Hi,
I had a bricked Desire HD on which I gave for JTAG (restoring hboot). However, after the JTAGging process, my mobile signals had gone and I noticed that the IMEI number was different on the firmware from the one written on the mobile box and the back of my phone, is there any way to repair restore it? I will be very thankful
Click to expand...
Click to collapse
got any solution ?? i have same problem too
coolyahya said:
Hi,
I had a bricked Desire HD on which I gave for JTAG (restoring hboot). However, after the JTAGging process, my mobile signals had gone and I noticed that the IMEI number was different on the firmware from the one written on the mobile box and the back of my phone, is there any way to repair restore it? I will be very thankful
Click to expand...
Click to collapse
Z4Zeeshan said:
got any solution ?? i have same problem too
Click to expand...
Click to collapse
Hmmmmm..... In order to do such things, you have to put your device in HTC DIAGNOSTICS MODE, when the device is put in this mode. Another device is enabled in the DHD so that when its connected to a pc, the pc also recognizes the phone as HTC DIAGNOSTIC INTERFACE.
If you are able to archieve this, then you can modify your IMEI with QPST or CDMA WORKSHOP.
mickeyasamoah said:
Hmmmmm..... In order to do such things, you have to put your device in HTC DIAGNOSTICS MODE, when the device is put in this mode. Another device is enabled in the DHD so that when its connected to a pc, the pc also recognizes the phone as HTC DIAGNOSTIC INTERFACE.
If you are able to archieve this, then you can modify your IMEI with QPST or CDMA WORKSHOP.
Click to expand...
Click to collapse
Can u please tell how can I do this?
coolyahya said:
Can u please tell how can I do this?
Click to expand...
Click to collapse
Wow...this is going to be long... Anyway.
What rom are you using now?
Sense or AOSP/AOKP/CM/MIUI?
EDIT: Go to google and search for QPST and download it, install it on your PC
please reply
mickeyasamoah said:
Wow...this is going to be long... Anyway.
What rom are you using now?
Sense or AOSP/AOKP/CM/MIUI?
EDIT: Go to google and search for QPST and download it, install it on your PC
Click to expand...
Click to collapse
please tell us a tutorial for QPST and is there any addition cable or something like htc dongle etc needed for this???
mickeyasamoah said:
Wow...this is going to be long... Anyway.
What rom are you using now?
Sense or AOSP/AOKP/CM/MIUI?
EDIT: Go to google and search for QPST and download it, install it on your PC
Click to expand...
Click to collapse
I am using the AOSP KK ROM, ok downloading
Z4Zeeshan said:
please tell us a tutorial for QPST and is there any addition cable or something like htc dongle etc needed for this???
Click to expand...
Click to collapse
No.Just USB
]Now, the annoying part is, To put the DHD in DIAG MODE.
I searched and searched but couldnt find the command. So i went over to this thread http://forum.xda-developers.com/showthread.php?t=1626638
and found some DIAG codes but they were for samsung. I still tried and tried and was able to enable DIAG mode with this command
Code:
adb shell
su
echo 1 > /sys/devices/virtual/android_usb/android0/f_diag/on
After entering this, a new device pops up in device manager but QPST is unable to communicate with the device.
It seems i have to enable other stuffs.
And thats where i got stuck. But now that you guys are also in this mess, we could create a thread in the General Xda thread asking for how to completely enable DIAG on HTC Devices
mickeyasamoah said:
No.Just USB
Click to expand...
Click to collapse
any guide for HTC DIAGNOSTICS MODE for DHD ?? please help me i am a noob
mickeyasamoah said:
No.Just USB
Click to expand...
Click to collapse
Downloaded
Go here and download the diag drivers for htc.
http://www.cdmasolutions.com/drivers.html
I have got one or two things to do so you can try your hands. Once you have installed ur drivers and QPST and entered the command from adb, open QPST configuration. If you see an open port with the inscription no phone, then you are stuck but if you see an open port with phone then you could be getting your phone working any moment from now.
Note if your phone shows up correctly, becareful of what you do with QPST. or you could brick your device.
Got to go...seeya later.
mickeyasamoah said:
No.Just USB
]Now, the annoying part is, To put the DHD in DIAG MODE.
I searched and searched but couldnt find the command. So i went over to this thread http://forum.xda-developers.com/showthread.php?t=1626638
and found some DIAG codes but they were for samsung. I still tried and tried and was able to enable DIAG mode with this command
Code:
adb shell
su
echo 1 > /sys/devices/virtual/android_usb/android0/f_diag/on
After entering this, a new device pops up in device manager but QPST is unable to communicate with the device.
It seems i have to enable other stuffs.
And thats where i got stuck. But now that you guys are also in this mess, we could create a thread in the General Xda thread asking for how to completely enable DIAG on HTC Devices
Click to expand...
Click to collapse
have you figure out completely enable DIAG MODE? or any way to use QPST???please reply:crying:
Z4Zeeshan said:
have you figure out completely enable DIAG MODE? or any way to use QPST???please reply:crying:
Click to expand...
Click to collapse
Nope.