Must be something wrong with wb preset.
Is google or samsung aware of it?
for me it was yellow not green but after upgrading to 4.0.3 I dont get the tint anymore
Sent from my Galaxy Nexus using xda premium
Most likely bad auto WB setting. Might wanna switch to manual
In my case they are red tinted and not green. I find it very strange myself.
Related
I would like to see what people are using/tweaking their color profiles to...right now I am at:
Red -10
Green 0
Blue -2
And I am pleased with the results
Feel free to chime in...who knows we may stumble onto a kickass combo (albeit each phone is'nt 100% identical)
-8 0 8, but kernel calibration dont calibrate white color... still very yellow tint.. very bad
I'm using the latest franco, but where can I find the color profiles setting?
Sent from my Galaxy Nexus using xda premium
Its In the app you buy from the market...just do a search for Franco...
jenicekk said:
-8 0 8, but kernel calibration dont calibrate white color... still very yellow tint.. very bad
Click to expand...
Click to collapse
I'm assuming that tint was there when you first bought the phone right? Which means I must really test the phones in the shop for this tint before I buy it.
I'm using 2 0 -5 as someone else posted when it was first released.
Sent from my Galaxy Nexus using XDA App
What do the number values correspond to? (i.e. gamma/tint/saturation, etc?)
I've been trying to get the app for a couple days now and it gives me an error everytime
Sent from my Galaxy Nexus using XDA App
fronc said:
What do the number values correspond to? (i.e. gamma/tint/saturation, etc?)
Click to expand...
Click to collapse
red, green, blue (I think)
Sent from my Galaxy Nexus using xda premium
666ogre666 said:
I've been trying to get the app for a couple days now and it gives me an error everytime
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
If it was a unauthorized to sell error, try it now, Franco was getting authorized by google and they wouldn't let anyone buy the app while they were doing that.
@fronc - IIRC its gamma
Can you post before and after screen shots?
sure..give me a lil bit...what are you wanting to see a screenshot of?
EddyOS said:
red, green, blue (I think)
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Changes the color brightness.
I get this weird problem when setting green very low: when the screen dims, it goes very green...
Yeah, I'm still trying to figure out what exactly this does...or at least what the use cases are of modifying these values.
I bought Franco's app to support him and for hotplug.....but haven't had the courage or motivation to mess with the screen settings.
What's the benefit of messing with these values?
Tubes6al4v said:
Changes the color brightness.
I get this weird problem when setting green very low: when the screen dims, it goes very green...
Click to expand...
Click to collapse
+1 if I even set it minus one it'll go green at the lowest brightness.
sent from my googletron
This is simple: this mod controls the RGB gamma values. If you give it R it will give some extra Red into the scree, G for green and B for blue. You can range between -255 and 255, and with experimentation there's the possibility to get the best color profile. It's as simple as this.
But it is not possible to change brighter tones and whites without completely screwing up dark and mid tones. This was possible with voodoo color
-10,2-2
That was just a random choice, but I plan on testing new things.
Sent from my Galaxy Nexus using xda premium
Tubes6al4v said:
Changes the color brightness.
I get this weird problem when setting green very low: when the screen dims, it goes very green...
Click to expand...
Click to collapse
I am also experiencing a green tint when the screen dims (if I lower the green value) I hope this can be fixed because the gamma on my screen is way too high and lowering all the values makes it look much better!
Sent from my Galaxy Nexus using Tapatalk
Same issue. Any time I mess with color values the screen goes green on lowest light settings.
Ok so on my et4g, the proximity sensor is lit up. I've never seen or knew it could light up.. it's a dim orange. Yes I'm positive its the proximity sensor too. I've messed around with it and it is still working..
Attached is a pic of it... looks light purple but it's not..
Anyone know why this could be lit up and not go off?? I've never seen anything like it before
Sent from my SPH-D710 using xda premium
Maybe the red led is screwed and if by any chance it is purple its just red+blue at the same time
I say reboot and if this keeps happening logcat and try a new rom
Your last hope would be going to the sprint store
Sent from my SPH-D710 using xda premium
How about a picture in the dark without the flash?
Not calling bs or anything, just covering all variables here. The 'lighting up' could be light reflecting off of it. I've seen mine shine before in the right light. It's not an LED so if it's actually emitting any light, in case you didn't know - that's not good
Seriously though, no flash and a dark room or it didn't happen.
That was in a dark roon with no flash on the other camera. If flash was on the et4g screen would have a flare on it.
I figured out what caused it.
It was an app called -notification pro plus-
There is a setting under general settings to use the proximity sensor.
I guess it doesn't work well with out phones.
Sent from my SPH-D710 using xda premium
gtuansdiamm said:
Maybe the red led is screwed and if by any chance it is purple its just red+blue at the same time
I say reboot and if this keeps happening logcat and try a new rom
Your last hope would be going to the sprint store
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Red and blue LEDs are on the left side of the phone, not the right.
Sent from my ridiculously long named phone ---
Sprint Samsung Galaxy S II Epic 4G Touch
I used a LED test app to see what colors would work and the colors were all off. I press the blue button and my red LED turns on. Green turns on like a weird blue Magenta.
I'm curious if anyone else has this problem or if there's a better app out there for testing (I've tried light flow, blink, and LED test)
Sent from my SGH-T999 using Tapatalk 2
Yeah, it's a known issue that all the color signal are screwed up. I believe this is an OS problem and using a non-touchwiz ROM like CM9 or CM10 would fix the issue.
Mine good.
Sent from my SGH-T999 using xda premium
i can confirm after having the issue with the stock rom, once i flashed to cm10 the led colors corrected themselves.
The developer for light flow had already escalated this to Samsung engineering. Touchwhiz screwed up the codes used to change the LED colors. That's why flashing a non Touchwhiz rom fixes it. We just have to wait for Samsung to issue an update or for Light Flow to figure out a workaround.
Sent from my SGH-T999 using Tapatalk 2
The lightflow Known Issues page has the best map of the color I have seen. It's about halfway down the page.
Thank you for that... i love how samsung always seems to jumble something lol
Sent from my SGH-T999 using Tapatalk 2
I'm using cm10 and almost all the colors didn't work, whatever color I chose it showed up red except for magenta color and purple the rest showed up as red led's
Sent from my SGH-T999 using xda app-developers app
Hey guys,
I bought a galaxy nexus with jellybean 4.1.1 but I have problems with the camera. It takes pictures with an obvious green tint. When I play around the settings it makes it either worse or not but still has a green tint. Also I cant even record videos because everytime I want to start the camcorder application it crashes. I upload a video to show you guys my problem. I really hope its not a hardware based error.
http://www.youtube.com/watch?v=3W-Ij3_SOrQ&feature=youtu.be
am i really the only one with this problem?
Sent from my Galaxy Nexus using xda app-developers app
Hello. Few months ago I noticed that screen doesn ´t show red color well. Screen has sometimes some kind of stripes. Definitely it is not normal. Has anyone same experience?
...
Try fiddling around with the screen settings in Trickster MOD
Sent from my Galaxy Nexus using xda app-developers app
So I noticed that it is not only red color problem, but red is worse.
When I set brightness to 50 % and more I can notice any stripes.
Is this something bad and should I worry about it?
I have the same problem , it's so annoying
If any one have a solution for this , please help us
I also have this problem. I think it is a screen burn in. I see it when displaying white colors and red. But with red it is way more obvious. I tried apps tot fix it with no luck.
Sent from my Galaxy Nexus using XDA Premium HD app
Can anyone explain this problem ? and why it's happening to us ?
Sent from my Galaxy Nexus