Develop Bugs

[DEV][UNOFFICIAL]CyanogenMod 7.2-GIO[Update: April 26, 2012]

Android 2.3.7 - Cyanogen Mod 7.2.0 For Galaxy GIO
I am not responsible for any damage to your phone
From 2012-03-25 i change this version to Like NIGHTLY. why??? because this version is most like vanilla build from CyanogenMod team.
i only changes alittle code to make this rom perfect on our device.
So, dont request unofficial feature to this rom
My target is to make stable, fast & good power comsumption rom[/CENTER]
Current status:
Working:
RIL
proximity sensor
touchscreen with multi touch
keychar
storage mode
gps
compass
accelerometer sensor
microphone (both phone & headset)
headset button
Root & Busybox
call,sms,mms
auto rotate
packet data with automatically apn detect
GPRS, EDGE, 3G, HSDPA
wifi
hardware video acceleration
secret code
bluetooth
camera
static wifi mac address
audio & FM Radio
wired & hotspot tether
Backlight Notification
Not Working:
Sim Toolkit (maybe)
known issue:
some option are not working on setting (like: mute camera sound, etc)
slow loading png image on gallery
after use camera, governor force back to "ondemand"
Download link:
ROM
You can download from goo-inside.me
Patch
WARNING: you must choose select correct patch, depend on your rom!
Note: you only need to install latest patch for your rom. latest patch included all change in previous patch
Patch for CM7.2-02112012
patch-CM7.2-02112012-1.zip [OUTDATED]
Patch for CM7.2-RC1-b1
CM7.2-RC-1-patch-4.zip - (2012-01-30) [OUTDATED]
CM7.2-RC-1-patch-3.zip - (2012-01-28) [OUTDATED]
CM7.2-RC-1-patch-2.zip - (2012-01-20) [OUTDATED]
CM7.2-RC-1-patch-1.zip - (2012-01-20) [OUTDATED]
PLEASE DO NOT MIRROR MY LINK
Source:
https://github.com/phiexz
Special thanks to:
CyanogenMod team
amarullz for Fantastic Aroma Installer
squadzone
ketut.kumajaya
psyke83
Maclaw
Donator
Nur Ahmad
T. William
go to next post to read changelog & how to install

How To Install
Flash latest Clockworkod Recovery:
skip this step if you have latest clockworkmod installed on your phone
Download latest ClockworkMod Recovery from This thread
Place it on root of your sdcard
reboot to recovery mode
install this cwm from recovery
Flash Cyanogenmod 7 ROM :
Download and copy the latest CM7 ROM to SD Card
Reboot to Recovery Mode
Select install zip from sd card
Select choose zip from sd card
Select the new CM7 ROM
Select Yes - Install update
Wait till the Installation is finish
Select reboot system now
NOTE:
It's not automatically wipe your data. if you want to install fresh rom, you must wipe data before install it!
If you from stock / custom rom based on rfs filesystem, u must flash ext4-formatter.zip before flash CyanogenMod. link & instruction can fount on This Thread. otherwise you'll stuck on android logo because it cant mount rfs filesystem!
have problem after upgrade from earlier cyanogenMod? you should wipe your data!!
Install & Enable a2sd Darktremor
Download dtapps2sd-2.7.5.3-beta04-signed.zip
Reboot to Recovery mode
mount your system & data, then Install it
After install, reboot your phone. it'll make your phone bootloop for 2-3 times
For Activating it:
go to terminal emulator and write:
su
a2sd zipalign
a2sd cachesdreset
if u want use a2sd extream (move data to sd-ext):
a2sd datasd
Install & Enable Simple2Ext (S2E):
install it from market. be sure u've install gapps before!
open s2e, and press menu and choose setting
checklist the advance mode, extended partitions info, mount as ext4
DON'T CHANGE READ BUFFER!! IT CAN MAKE YOU PARTITION CORRUPT
press back, and press menu -> reboot
if your phone not automatic reboot, u should reboot it manually
after reboot, open s2e again. u can check whatever u want
i'm check it all, except Application data (Application data = a2sd extream datasd)
reboot again
NOTE: if you cant activate S2E, i think your 2nd partition is corrupt. try to repartition it from PC

Changelog & Download Link
[ROM] patch-cm7.2-20120426.2-NIGHTLY-gio.zip
Revert some samsung's prebuilt library
Fix Audio routing to headset
Add missing sec_key keychar
[ROM] patch-cm7.2-20120426-NIGHTLY-gio.zip
update samsung's prebuilt binary & library
fix unstable ril daemon when in 2G mode
[ROM] patch-cm7.2-20120422-NIGHTLY-gio.zip
FIX: Video HW Acceleration
[ROM] CM7.2-20120421-gio-NIGHTLY-AROMA.zip
Changes by me:
AROMA: Update Aroma Binary
Change Experimental Kernel to v20120420
Many Changes on Experimental Kernel
Remove Disable SetupWizard.apk
Fix disable YouTube Function
Update Goo-Manager App to v2.0.2
Update prebuilt library & modules
Fix camera info
More: http://github.com/phiexz
Changes by cyanogenmod Team:
fix "Skip on security" functionality
Allow theming of framework UI elements.
Fix Quick unlock bug
Fix Quick unlock bug
Update & Add many translation
Improove webkit (Let me know if u have problem with browser)
Improve GPS
and more, you can check it here and here
[ROM] CM7.2-20120325-gio-NIGHTLY-AROMA.zip
Changes by me:
AROMA: User can select theme
Add more apn
remove unneded tweak, more vanilla
update dhcpconf
goo-inside.me OTA support
fix libaudio (mute on call). by psyke83
Big update for kernel
kernel: 800Mhz instead 806Mhz
kernel: Default clock is 800Mhz now, instead 787Mhz
kernel: A lot tweak for improve performance
kernel: Add Zcache & frontswap. better memmory management
More: http://github.com/phiexz
Changes by cyanogenmod Team:
Ipsec-Tools: racoon: introduce authentication method parameter
Skia: improve API
Zlib: Update to version on adler32/slhash repo as of Mar 07, 2012
Framework: implement Motoblur-like fingerprint tactile feedback
ADW: add sortable apps list for catalog setup
CMParts: Add option to enable/disable the ICS rotation animation
Contacs: Fix soft keyboard appearing on dialer under certain conditions.
Contacs: Fix initial state for t9 sort mode
MMS: Added a max SMS length option
MMS: Fix cursor repeatedly moving back to beginning of To field
Phone: Improve toast strings
MediaProvider: Backport "disappearing SD media" fixes from CM9
and more, you can check it here and here
[ROM] CM7.2-03092012-gio-KANG-AROMA.zip
Changes by me:
Using AROMA Installer to install ROM
NB: if you use px-recovery, please update to verison 0.28
Include 3rd apps & setting for customize rom
Include latest Google Apps
A lot of change on kernel-20120309 from squadzone
improve libaudio. by psyke83
Changes by cyanogenmod Team:
Added many translation
Added build time on system info
Many bugfix, more stable
and more, you can check it here and here
[ROM] CM7.2-02242012-gio-KANG.zip
Changes by me:
remove unused tweak
cpufreq: tweak ondemand cpufreq
update libaudio from CodeAurora, thanks to psyke for fix libaudio for FM Radio & Mic
lib: add libmmomxcore & use libOmxCore from samsungs
improve gallery, but sometime still have issue with .png image
wlan: using official atheros tools, remove get_macaddress
sd-ext: now always mount as ext4. this change should fix any problem with S2E but not tested
updater-scripts: unmount before formatting device. this change for anyone who use px-recovery
Filemanager: Using source from squadzone. fix send files from filemanager
Changes by cyanogenmod Team:
fix alarm freeze on landscape mode
fix rotation freeze on screen off
and more, you can check it here and here
[Patch] patch-CM7.2-02112012-1.zip
L]
Working with Camera.apk
Fix video capture orientation
Remove wide option from video capture mode
[ROM] CM7.2-02112012-gio-KANG.zip
Many patch on kernel for better performance
Framework: Improved cached
Framework: Add screen rotate animation from ICS
Many new option on setting (Tablet tweak, lockscreen style, disable scrolling cache, custom carrier label, lock volume key, bootanimation, power button end call, and many more)
Fix: fixed wired tether. now not need 3rd application like wiredtether.apk (tested on my archlinux)
Fix: Create & Loading thumbail on Gallery3D. now much faster. but sometime slow on png image
Fix: Screen flickering when turn on phone & disable screen on animation
IMPROVE: 100% rendering use GPU
IMPROVE: more snappy rom
IMPROVE: better ram management
and other
[Patch] CM7.2-RC-1-patch-4.zip
[Download]
trying to fix screen on blinking (when u disable screen on animation), but sometime still blinking
sensors hack, it should decrease gmaps v6.x lag. please test it. not tested by me
now using RGBA8888 color
[Patch] CM7.2-RC-1-patch-3.zip
[Download]
reworking again with camera driver on kernel, please check about orientation now
change camera app with modded camera.apk by squadzone
fix Droidwall problem (please check)
screen on animation (enable it from cyanogenMod setting)
[Patch] CM7.2-RC-1-patch-2.zip
[Download]
fix charging when phone turn off
[Patch] CM7.2-RC-1-patch-1.zip
[Download]
fix camera orientation driver from kernel. include with new official camera.apk from cyanogenMod. yesterday we used unofficial camera.apk
improve video recording, now using AAC instead of amr for audio
change local version to perf-CL783107, included module for CL783107 (wifi,zram,tun & cifs)
improve usb mass storage stability
patch usb composite.c, hope will fix usb tether problem
[ROM] CM7.2 RC-1-b1
[Download]
Added many option on cyanogenMod setting
Change device name from GT-S5660 to gio
Fixed many bug
disable live walpaper by default, because live wallpaper make cpu & gpu extra work, hot & drain more battery
added lagfree & lulzactive governor
added 672Mhz cpu scalling
patch backlight to fix backlight problem after set brightness
added Backlight Notification (BLN) support. use bln controll to set it!
patch libaudio for better audio. please check it and let me know your opinion. is it better or worse?
Change hardware name from GT-S5660V to GT-S5660
[ROM] CM7.2 RC-0-b2 to b4
Please go to [DEV][2.3.7]CyanogenMod 7.2-GIO-KANG-RC0 build 4 thread to see changelog
[ROM] CM7.2 RC-0-b1
[Download]
First build cyanogenmod 7.2 rc-0 from source, with many bug & problem

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Downloading
I will be a tester.
---
Found bug :
1. Bluetooth can't received file from PC.
2. Can't sign google account in account settings.
3. android.process FC for 2 times.
4. Backlight always on (maybe the kernel?)
5. As phiexz said, camera wrong orientation.
---
i don't know what is the changelog from 7.1.0 RC 3.0. Galaxy Ace thread says that the changelog is under the hood (maybe the performance), not the cosmetics (appearance).

Downloading. Will install later and post any issues.

Can i upgrade directly from RC 3.0?

下载中，待会测试download and test

Culfa said:
Can i upgrade directly from RC 3.0?
Click to expand...
Click to collapse
Sure, i upgraded it from Rc 3.0

Upgraded from 7.1.0 RC3.0. Everything seems to work except the camera orientation. I've noticed a faster connection to the GSM and 3G network. In RC 3.0 it ometimes took ages to get a connection.

Is it non wipe like CM7 nightlies...
I dont want to redo everything again just to test...
I dont have problems with the previous version, but it is my second phone, only use SMS, calls, bluetooth, wifi and market...

gps
1. Gps not working, not even shows the icon in notification bar.
2. After a call, the screen remains blank, the proximity sensor have issues.
Back to RC3

fantastic! fast update
i want to try it, but not now

tried to install from rc 2. having troubles: at the boot appears a "android" logo and then nothing else. returning to rc2

ItachiSama said:
tried to install from rc 2. having troubles: at the boot appears a "android" logo and then nothing else. returning to rc2
Click to expand...
Click to collapse
i also had this, try re-running the zip in recovery agn, and reboot it a few times. i did this and it was okay.

Thanks for your reports about the bugs.
By the way, just for info.
I, friend of phiexz want to say this. Maybe phiexz will probably take a little longer time to fix the bugs because of his busy in college. He has so many task to do for his college, so he asked our help to find the bugs on 7.2 and post it here. Once he is not busy anymore, he will fix the bugs for us.
So, we have to be patience.

ok, because not many reacted on the update test, i just installed it over the RC3 without wipe or anything.
First look was ok, but no apps that where installed, so i rebooted again, and all is working, what was already on the phone.
Yes, camera has lost its direction and barcode scanner too .. but heck we know that ... link2sd still ok, wifi and 3G working, root explorer and google / gmail, Go contact, sounds market still working ... so no complaints yet ... other then the known issues oh wait Angry birds seasons still works !!
small correction, Gmail settings did not remember to synch email, but ticked that option again and its working
Correction (and wierd!) Qr scanner works ok (applied the fix on RC3) so cam scks but barcode scanner works

I cant connect to google account.
Fast discharged baterry, if I use only wifi, and 3G and screen light on 25%, 1% baterry per minute, its very bad. If screen is off, and locked, everything with baterry its okay (baterry is after callibration).
I not prefer ADW launcher, because it is slow, i Installed GO Launcher, and it is very faster than ADW on this ROM.
I've not found other bugs.

yonzz said:
Thanks for your reports about the bugs.
By the way, just for info.
I, friend of phiexz want to say this. Maybe phiexz will probably take a little longer time to fix the bugs because of his busy in college. He has so many task to do for his college, so he asked our help to find the bugs on 7.2 and post it here. Once he is not busy anymore, he will fix the bugs for us.
So, we have to be patience.
Click to expand...
Click to collapse
Thanks for the update.. Tell him to take his time.. Remember, the only rule on cyanogenmod, you don't ask for ETA.. ..

Camera and WiFi-mac fixed by me.
I'll upload new package soon.
Now it's fully functionally - only proximity sensor doesn't works.

[ROM][IMM76L][4.0.4][AOSP] ICS333 2.0.1 | Team 3xtr3m3 | Fast,stable,easy (6/7/2012)

This ROM is built from Google Android sources, with a few added functionalities programmed by me and others based on CM9 and AOKP to make it more comfortable and user-friendly, improving the user experience.
This is a serious ROM, no functionalities of doubtful utility are added, and their source code is studied in order to be sure what they are exactly doing. This ROM is focused on providing stability and a better stock experience.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main features:
Built from Android sources (IMM76L)
Improved notification bar toggles: long press a toggle to go to related Settings menu; multi-state sound toggle.
Numeric battery indicator (Optional - can be changed to stock battery indicator in Settings -> Battery -> Press Menu Button -> Change battery style).
Brightness control in status and notifications bars (Optional - can be disabled in Settings -> Display -> Brightness control slider).
Real and improved autobrightness: brightness really goes down when light decreases (Optional - Can be disabled in Settings -> Display - Automatic decrease). Based on stratosk's approach but using a logarithmic scale, which fits best to the human eye.
Extended power menu with reboot, recovery and screenshot.
TV-Out (Go to Settings -> Display to activate it).
Video face effects working
Application killing with long press on back button (Optional - Can be disabled in Settings -> Developer options -> Fast application killing).
Choose storage in Camera application
Power button shooter in Camera application
Timer option in Camera application
T9 Dialer
Galaxy S Settings from CM9 are 100% integrated in Settings menu
Removed "R" roaming indicator for national roaming
Root, Busybox and SuperSU
Kernel Semaphore 1.2.2s (387 MB RAM)
HugeMem patch for 720p video by F4K
Preinstalled app: OI File Manager
APN's predefined huge list (source: CM9)
Modified hosts file to remove ads in applications (source: http://winhelp2002.mvps.org/hosts.txt)
What works
Everything!
Known bugs
Camera FC when restoring default settings
Phone app FC if Bluetooth is disconnected while the phone is trying to connect to a Bluetooth headset
**************************************************************************************************
2.0.1 RELEASED!
ALWAYS READ THE FAQ AND SEARCH IN THE THREAD BEFORE ASKING!!!
Download Links
ICS333 2.0.1: http://d-h.st/PpL (Mirror: http://minus.com/mcnldhbFF/)
GAPPS: http://goo.im/gapps/gapps-ics-20120429-signed.zip
If you have questions/problems or you just want to chat about it, you can also go here : http://webchat.freenode.net Channel : ##ICS333
**************************************************************************************************
How to update from a previous version of ICS333:
Flash ICS333-2.0.1-signed.zip in CWM Recovery, without making any kind of wipe
Flash the GAPPS
Reboot. If you have followed these instructions, you won't have lost any data.
If you notice, after updating, that your media (photos, music, videos...) appears twice in Music and Gallery apps, just clear "Media Storage" data (Settings -> Apps -> All -> Media Storage -> Clear data) and reboot. Then, just wait a long while (it can take even 1 hour depending on the amount of media files you have in your phone).
Always check your IMEI after flashing. If it starts with 0049, you have lost your IMEI. If that's your case, read the installation guide for further instructions.
**************************************************************************************************
Clean Installation (if you come from other ROM)
Follow the instructions that are available in this post: http://goo.gl/elAJv (big thanks to psyqiq)
**************************************************************************************************
FAQ
I have flashed the ROM and it works OK, but I can't get signal or make/receive calls/sms. What is happening? You have lost your IMEI. You can get your IMEI back recovering your EFS backup (if you made one) or flashing a Gingrebread Stock ROM (look for one with PDA, PHONE and CSC) with Odin.
I have flashed the ROM and I don't have Play Store. How can I install it? Before flashing, read the instructions! Download the gapps file and flash it.
Does Facebook sync works? No, because adding Facebook sync breaks Picasa sync. The only responsible for this problem is Facebook. You can use third-party apps such as HaxSync for this purpose.
Battery is draining fast. What is happening? Before reporting battery problems complete two charging cycles. If you still have battery problems, ask yourself how long should the battery last with your usage (we are not using an old Nokia phone with 1.0" screen) and discard that is caused by an application. And then, if you still have a draining problem, and you don't know the cause, report your problem attaching:
1) Screenshots of every battery statistics
2) BetterBatteryStats dump. You can download BetterBatteryStats in this thread: http://forum.xda-developers.com/showthread.php?t=1179809. To generate the dump press Menu key -> More -> Dump to File. The dump file will be generated in /sdcard, and its name starts with "BetterBatteryStats".
3) The output of the logcat (the last one better in a private message). In order to get the logcat output, you will have to enable the Logger in the Semaphore app and reboot if you hadn't enabled it before. The logcat starts from scratch each time you reboot or turn on your phone so, wait some hours before sending it.
Remember: just complaining about battery life without providing useful information doesn't help anybody and will not solve your problem.
My music, photos and videos are duplicated in Music and Gallery apps. It usually happens when you flash the ROM without wipe. To fix that, just clear "Media Storage" data (Settings -> Apps -> All -> Media Storage -> Clear data) and reboot. Then, just wait a long while (it can take even 1 hour depending on the amount of media files you have in your phone).
Suddenly, all apps start throwing FCs. What's happening? Your /datadata partition is full. The best solution is to wipe everything and make a clean install of the ROM. Then, when you have finished installing the ROM, flash one of these fixes: http://forum.xda-developers.com/showthread.php?t=1541942, http://forum.xda-developers.com/showthread.php?t=1665742.
Does FM Radio work? Yes, you can download Spirit FM, but do it at your own risk.
Does HW acceleration work when playing videos? Yes, but not with stock player. There are video players in the Play Store that support HW acceleration. For instance, Dice Player.
The LED buttons don't turn on when I have notifications. How can I enable this feature? Download BLN Control from Play Store.
Can I use other kernels such as Devil or MNICS?Yes, just follow their installation instructions as in any other ICS ROM.
Can I customize or remove the toggles of the notification bar? No, you can't But maybe you want to publish a MOD for ICS333?
**************************************************************************************************
2.0.1 changelog:
Updated to IMM76L build
Changed updater script in order to make it harder to lose your IMEI when updating from Gingerbread
2.0 changelog:
New autobrightness system, totally reworked from scratch. Based on the approach of stratosk, but using a logarithmic scale.
Added option for enabling/disabling autobrightness decrease (Settings -> Display -> Autobrightness decrease)
Added option for enabling/disabling "long press on back key to kill apps" (Settings -> Developer options -> Fast application killing)
"Galaxy S Settings" is now totally integrated in the Settings menu.
Updated kernel to Semaphore 1.2.2s (will help with bootloops).
Modified installation script (trying to prevent some IMEI losses, but I can't promise anything).
Updated Messages app: prevents FC when the mmsc is null in the APN.
Updated Email app: prevents wake-ups in downloader component (source: CM9)
Updated translations (thanks to all of you that have collaborated)
Updated Busybox
Updated APN list (source: CM9).
Updated host file (source: http://winhelp2002.mvps.org/hosts.txt)
1.1 changelog:
Added an option to show/hide the brightness control slider of the notifications bar (Go to Settings -> Display -> Brightness control slider).
Added an option to change between stock battery icon and numeric battery icon (Go to Settings -> Battery -> Press Menu Button -> Change battery style).
Tried to prevent an infrequent soft reboot when loading the lock screen.
Older changelogs: http://pastebin.com/3Gbm6uxj
**************************************************************************************************
(Thanks to jarhead166 for the video)
Thanks to:
Huge thanks to Cyanogenmod team for their GalaxyS-specific code, some AOSP modifications and gapps
AOKP team (brightness control and fast application killing)
F4K for the BigMem patch
http://winhelp2002.mvps.org for the hosts file
stratosk for his awesome kernel
psyqiq for his awesome support

This looks promising. Will try it out asap.
Tapatalking in my sleep

Looks really nice, gonna try this soon!

Nice . But GApps link outdated .

btw, where are the AOKP controls? Can't see any controls in the settings menu!!

amirage said:
btw, where are the AOKP controls? Can't see any controls in the settings menu!!
Click to expand...
Click to collapse
Hello! This is not AOKP. The base is AOSP, just took brightness slider and fast application killing from AOKP. Probably I will make these two features configurable from Settings menu in the next release.

Trojan38 said:
Nice . But GApps link outdated .
Click to expand...
Click to collapse
I think that I posted the latest CM9 Gapps package. Check here:
http://wiki.cyanogenmod.com/wiki/Latest_Version#Google_Apps
I don't provide support for other third-party gapps packages.

el_navajita said:
I think that I posted the latest CM9 Gapps package. Check here:
http://wiki.cyanogenmod.com/wiki/Latest_Version#Google_Apps
I don't provide support for other third-party gapps packages.
Click to expand...
Click to collapse
Most updated GApps are always at goo.im : http://goo.im/gapps .

Trojan38 said:
Most updated GApps are always at goo.im : http://goo.im/gapps .
Click to expand...
Click to collapse
Ok, I'll try them to be sure that there is no problem using them and update the post. Thank you!

nice..
do you read my mind?
i also think a simple rom like CM9 but have a Brightness control in status bar like aokp before this and today it is in front of my eye...
i will try it after i go back to my college this friday..

Thanks, look interesting. Will flush it this weekend (so many roms to test!) and report

Trojan38 said:
Most updated GApps are always at goo.im : http://goo.im/gapps .
Click to expand...
Click to collapse
Thank you very much! Link updated.

el_navajita said:
Hello! This is not AOKP. The base is AOSP, just took brightness slider and fast application killing from AOKP. Probably I will make these two features configurable from Settings menu in the next release.
Click to expand...
Click to collapse
Yes you are correct. My mistake. Do you think you could include power saver feature from AOKP in the next update? Would love to have this...it'd be really great.

Thank you el_navajita!!!
Hey, one more new ROM. Flaaaaaaaaaaaaaaaaashing Now. Thank you el_navajita!!!

I will check that feature and think about it. Thanks!
Enviado desde mi GT-I9000 usando Tapatalk

Why not develop clean AOSP ROM odexed 4.0.4 and continue where team ICSSGS stop
Sorry for my english!
Sent from my GT-I9000 using Tapatalk 2 Beta-5

Theoretically, ICSSGS has not stopped. Anyway, this is a very clean AOSP ROM, just with very few additions that I'm sure improve the user experience. It is impossible to build a ROM that likes everybody, you know Anyway, if you want pure AOSP with my ROM, probably replacing some files of my framework with the ones of a stock Nexus S ROM will work.
Enviado desde mi GT-I9000 usando Tapatalk

sorry wrong post
Sent from my GT-I9000 using xda premium

Do you suggest an example?At least, I can see chinese words in websites.
Enviado desde mi GT-I9000 usando Tapatalk

sorry posted in a wrong thread ><
Sent from my GT-I9000 using xda premium

[ROM] CM-11.0 | Android 4.4.2 KitKat | Galaxy Tab 7" [RETIRED]

[ROM] CM-11.0 | AOSP | Android 4.4.2 KitKat KOT49H | Kernel 3.x HumberOS | SGT7 | TWRP | P1000/L/N SGH-T849 GSM | SCH-I800/SPH-P100 CDMA VZW/SPRINT
[RETIRED] (Download links in Post #4)
| CyanogenMod 11.0 - Android 4.4.2 - KitKat |
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR YOUR
In case you don't know:
Code:
/*
* I am not responsible for bricked devices, ruined SD cards,
* damaged network, mobile or data components, or any other loss or stress
* suffered by you, your loved ones or your device resulting
* from flashing and/or using any of the ROMs provided in this thread.
*/
terenceng said:
Do some homework first before you flash any ROM. At the very least, read the WHOLE thread first about what others have said in this thread. Read about flashing, rooting, going back to stock, bricking and unbricking, the various AOSP and CM versions and their derivatives, odexed versus deodexed files, Dalvik, ART, etc. Do not expect us to answer your questions if they are already answered in my first few posts or somewhere else in the thread. Test your ROM that you've flashed carefully and thoroughly. We will not answer questions that claim something doesn't work when we know it does.
Always back up what you mind losing (eg. /data) before flashing. Better still, back up everything via a nandroid backup. Or you can use the Titanium or Helium app to back up what you want to save.
I'm a programmer by training and profession. Here, I'm a ROM builder, programmer and scripter. I may make changes to the code (local repos) pulled from the remote repos to suit my builds. I build CUSTOM ROMs and NOT OFFICIAL ROMs. Nevertheless, ALMOST ALL the original code will be left unchanged. If you strictly want an OFFICIAL ROM, you are in the wrong thread.
Except where I made enhancements and fixes to certain aspects of the ROMs, I am not one of the original developers. So do not expect me to fix or include PRIMARY features not already in the builds. You can tell us what works, what doesn't. You can tell us what's good and what's not. You can tell us what you want in the ROMs. And through this thread, hopefully, the developers will take take. We will certainly take what you say into consideration as that's what this thread is for, but we may or may not be able to help fix everything, and are not obliged to do anything you say.
You are encouraged to participate actively in this thread. This thread is for you. Without you, this thread is meaningless. Help us to help you.
This thread is STRICTLY only for custom ROMs based on Android 4.4 KitKat built for the Samsung Galaxy Tab 7". ROM builders for Android 4.4 are welcomed to post such builds in this thread. NO UNRELATED POSTS HERE.
Click to expand...
Click to collapse
terenceng said:
Some new features in Android 4.4
Chromium WebView
Tools for analyzing memory use (adb shell dumpsys procstats)
Screen recording (adb shell screenrecord) (not working yet)
Full screen immersive mode
Latest commits from Google AOSP 4.4, CyanogenMod's and SGT7's repos
SELinux enabled (Enforcing or Permissive settable mode)
TWRP touch-UI recovery with support for encryption, compression,
time and battery display
Root
Compatible with both Dalvik and ART
Faster and slickier than CM-10.2
Over-clocking to 1.4GHz
6 CPU governors
Trebuchet launcher
SGT7 features (more to come)
Tablet UI features (more to come)
Screenshots
USB Host / USB OTG (need Y cable) (Testers needed)
USB Tethering
Service
Call
SMS/MMS
2G
Data (3G/HSDPA)
WiFi
WiFi Tethering
Bluetooth
Bluetooth Tethering
Bluetooth support for HID Devices, Low Power Proximity and extended LE scan
GPS
Audio playback
Video playback with support for HD and HW acceleration
Camera
Include ROM variants for tabs with damaged internal sdcards (New!)
Click to expand...
Click to collapse
terenceng said:
Apollo
Browser
Calculator
Calendar
Camera
Clock
Downloads
DSP Manager
Email
File Manager
Gallery
Messaging
Movie Studio
People
Phone
Search
Sound Recorder
Terminal Emulator
Torch
Voice Dialer
WhisperPush
Click to expand...
Click to collapse
terenceng said:
Issues:
terenceng said:
Long-standing bugs carried over from previous CM versions:
Wired headset button presses do not work.
Stock camera app FCs in video mode (fixed, will include in newer builds)
P1s only:
Num Keys squashed in SIM Unlock Screen (fixed, will include in newer build)
app2sd not working for NoInternalSD build
P1Cs only:
No data/service/gps
app2sd not working for NoInternalSD build
Click to expand...
Click to collapse
Incompatibilities:
terenceng said:
ART compatibility list
(May not be up-to-date or accurate)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
terenceng said:
Back up.
P1/L/N flashers: if you haven't backed up your /efs folder, restock to GB-v5, root your tab and back up the /efs folder.
Preferably start from a clean state by restocking to GB-v5 for P1/L/N, EI04 for SCH-I800 or EF17 for SPH-P100.
If you're coming from a ROM before CM-10 or equivalent, especially if coming from a non-MTD based ROM, flash CM-10.x first.
Verify the integrity of the cm-11-YYYYMMDD-terenceng-p1*.zip and and other zip files before you proceed.
You can let CwM or TWRP verify for you before it flashes by also copying the corresponding .md5 files
if available to the same location (root of internal or external sdcard).
If the current ROM on your tab does not have CwM or TWRP recovery, boot into DOWNLOAD mode and flash a suitable kernel:
heimdall flash --KERNEL kernel_filename
You may obtain a suitable (and the correct) kernel from the Downloads section or from another ROM.
Boot into CwM or TWRP recovery.
Wipe cache, dalvik cache and data.
Wipe or format system.
Flash cm-11-YYYYMMDD-terenceng-p1*.zip.
If you're switching from Normal build to NoInternalSD build, or vice-versa, reboot into TWRP Recovery, wipe cache, dalvik-cache and data again.
Reboot.
Allow tab up to 20 minutes (usually takes much less time) to reboot to the initial Setup screen.
Complete the initial setup (CM Account setup is optional).
Go to Settings, and enable Developer Options, allow installation from Unknown Sources,
enable Android Debugging, enable Advanced Reboot, etc.
P1/L/N flashers: if necessary, restore /efs and/or replace /radio/modem.bin with your local modem.bin, and reboot.
Restore any other backup(s) (eg. /data) that you have previously saved, if you want to.
If you want to convert to ART, do so now.
If you haven't done so, install the correct version of BaNkS Core GApps package obtainable here. You can install some other larger BaNkS GApps package (eg. Standard package) but, because this ROM is larger than other ROMs, for some removable stuff (eg. some removable system apps, wallpapers, ring tones, etc), either you remove them directly or from the cm-11-YYYYMMDD-terenceng-p1.zip file before you flash or you move and install them as user apps, so that the larger GApps package will fit into the limited /system space. Other GApps packages like PA GApps, etc will most likely not fit in. Remember to install GApps after the ROM install and reboot steps. If you don't follow this instruction, you may get weird results like "installed stuff not appearing".
Click to expand...
Click to collapse
How to Enable Developer Options
terenceng said:
Go to Settings, About Device and press Build Number 7 times
Click to expand...
Click to collapse
How to Enable ART
(Note that ART is experimental at this point)
terenceng said:
Go to Settings, Developer Options, Select Runtime and choose Use ART.
If prompted with a CyanogenMod disclaimer pop-up, tap OK to proceed with the ART conversion.
System will reboot. The reboot (including "Optimizing Apps") will take a LONG time as the system
converts to ART, so be patient.
Click to expand...
Click to collapse
How to Enable Battery Percentage
terenceng said:
In Terminal Emulator or using adb shell, enter following commands:
su (not necessary if you are already root)
content insert --uri content://settings/system --bind name:s:status_bar_show_battery_percent --bind value:i:1
reboot
Note: From build dated 5 Dec 2013, a better alternative is: go to Settings | Interface | Status bar | Battery status style, and select the style you prefer.
Click to expand...
Click to collapse
Enjoy!
First 10 posts of this thread:
#1: This post
#2: Screenshots
#3: ChangeLog
#4: Downloads
#5: Credits
#6: Testing and Reporting Bugs
#7: reserved
#8: reserved
#9: reserved
#10:reserved

P1000 running build dated Jan 1, 2014
System apps
​

terenceng said:
12 Feb 2014 (P1C build)
Front camera fix with 1.3MP resolution
app2sd fix (untested)
Left-handed navigation bar in landscape mode (untested) (setup in Settings | Interface)
Add file uploading support in chromium-based web browsers (untested)
Click to expand...
Click to collapse
terenceng said:
26 Jan 2014 (P1C build)
Essentially same updates as the P1/L/N build dated 20140124
Main bugs in build 20140111 still exist
Include an experimental build for P1Cs with damaged internal sdcards
Click to expand...
Click to collapse
terenceng said:
25 Jan 2014
Experimental build for P1000/L/Ns with damaged internal sdcards
Essentially the same as the normal 24 Jan 2014 build
(since I compiling a NoInternalSDCard build, I might as well include the normal build)
Click to expand...
Click to collapse
terenceng said:
24 Jan 2014
Newest commits from AOSP, CyanogenMod and SGT7
Front camera fix with 1.3MP resolution
Bluetooth support for HID Devices, Low Power Proximity and extended LE scan (more to come)
Status bar enhancements: slide for brightness control, double-tap to sleep (setup in Settings | Interface | Status bar)
Click to expand...
Click to collapse
terenceng said:
11 Jan 2014 (P1C build)
Initial cm-11.0 release for the P1C
Essentially the same features and bugs as with the P1/L/N build dated 1 Jan 2014
Bring back Launcher3
Main things that do not work:
No data/service/gps
app2sd not working
Click to expand...
Click to collapse
terenceng said:
1 Jan 2014
HumberOS kernel v1.54 update
SystemUI :
Remove the navigation camera icon in keyguard if disabled
Fix battery charging indication
Make available full-screen immersive mode and custom lockscreen widgets
Boot animation fix
Click to expand...
Click to collapse
terenceng said:
30 Dec 2013
Newest aosp, cm and sgt7 commits
P1L/P1N boot-loop fix (testers needed)
Click to expand...
Click to collapse
terenceng said:
25 Dec 2013
HumberOS kernel official v1.53 update
Lockscreen Security settings :
Reorganize and clean up lock screen section
Lockscreen Vibrate
Slide Lock Delay
Menu Unlock
Home Unlock
Variable size pattern lockscreen
Toggle dots/error pattern visibility
Click to expand...
Click to collapse
terenceng said:
20 Dec 2013
Disable volume change tone during quiet hours.
SystemUI: use the same color for circle battery as clock color, fix hidden battery icon style, fix circle battery percentage alignment for low dpi.
Latest commits from aosp, cm and sgt7.
(Note: Default value of dalvik.vm.dexopt-data-only is now 1 instead of 0 (they changed it, not me!). From this build onwards, if the property dalvik.vm.dexopt-data-only is missing or unset, it defaults to dalvik.vm.dexopt-data-only=1. Set dalvik.vm.dexopt-data-only=0 if you want to revert back to the traditional use of /cache).
Click to expand...
Click to collapse
terenceng said:
16 Dec 2013
Enable Quick Settings panel, Tiles and layout
More battery icon styles in status bar (Settings | Interface | Status bar | Battery status style)
CyanogenMod disclaimer when you convert to ART
Battery: fix FC on boot till battery stat present, dock battery support
Lockscreen quick unlock checkbox fix
(Note: This and subsequent builds include the set property dalvik.vm.dexopt-data-only=1. Therefore, whether you have resized cache partition or not, whether you want to use ART or not, ALL P1/L/N users CAN flash it.)
Click to expand...
Click to collapse
terenceng said:
12A/B Dec 2013
Fix TWRP to enable it to boot from OFF state by holding Volume-Up + Power keys
Build dated 12A: Allow use of ART without cache partition resize (experimental)
Build dated 12B: Require cache partition resize to use ART ("relatively" stable)
(Note: If you have resized your cache partition, you can still flash build 12A)
Click to expand...
Click to collapse
terenceng said:
12 Dec 2013
Android 4.4.2 (KOT49H)
Click to expand...
Click to collapse
terenceng said:
11 Dec 2013
Latest SGT7 commits with TableUI, more Lockscreen and Wifi settings
Latest CM and AOSP commits
Click to expand...
Click to collapse
terenceng said:
6 Dec 2013
Android 4.4.1 and latest commits (KOT49E)
Click to expand...
Click to collapse
terenceng said:
5 Dec 2013
More SGT7 UI features - try them yourself - go to Settings | Interface and explore the various options
TV Out (need testers) (Settings | Device/More | Advanced | TV)
Screenshots now working (Enable screenshots: Settings | Buttons | Power Menu | Screenshot.
Take screenshot: Hold Power button and choose Screenshot)
Initial setup, rotation and switching between landscape and portrait modes are now smooth.
Click to expand...
Click to collapse
terenceng said:
1 Dec 2013
SGT7 features premier
Trebuchet launcher (replaces stock launcher)
Google Play removed from ROM
Click to expand...
Click to collapse
terenceng said:
27 Nov 2013
Phone/RIL/Data is up (need testers).
A new boot animation. (They changed it, not me!)
Click to expand...
Click to collapse
terenceng said:
22 Nov 2013
CM Superuser now works - SuperSU no longer required (you can still install it of course).
Browser app now works.
Latest CM commits.
Click to expand...
Click to collapse
terenceng said:
21 Nov 2013
Initial alpha release.
Expect FCs, stuff to be NOT working.
Click to expand...
Click to collapse

terenceng said:
Read and Follow the Installation Instructions in Post #1 Carefully
(Download links removed)
Click to expand...
Click to collapse
​

terenceng said:
All the "hundreds" of AOSP and CyanogenMod development team members
cdesai, humberos, sbradymobile, and other device maintainers for the Samsung Galaxy Tab 7"
humberos for his outstanding HumberOS kernel
TeamWin development team for TWRP
Everyone else who participated in the development
Click to expand...
Click to collapse

Note
terenceng said:
The 4.4 builds are clearly VERY NEW. Test the boot-up, system, root access, recovery, data, mobile, wifi, 3G, bluetooth,
GPS, audio, video, camera, UI, the 4.4 features, etc.
Report issues you encounter. 4.4 development will inevitably proceed at a fast pace, so check for feedback by
other users, updated builds, etc.
It is imperative that you don't just report a problem verbally but also submit some evidence or logs of the problem.
Attach the logs to your posts.
These logs are especially useful to the developers who might be looking through the pages of this thread.
Grab a logcat right after the problem has occurred. (Include at least a few pages of the log, not just the last few lines)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot.
A logcat after a reboot is useless)
Use one of the following ways to get a logcat, dmesg and/or last_kmsg:
Using adb:
Code:
adb logcat -v long > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
adb shell cat /proc/last_kmsg > last_kmsg.txt
Using Terminal Emulator:
Code:
logcat -v long > /sdcard/logcat.txt (wait for a few seconds then press Vol-Dn + C)
dmesg > /sdcard/dmesg.txt
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
OR
logcat -v long > /emmc/logcat.txt (wait for a few seconds then press Vol-Dn + C)
dmesg > /emmc/dmesg.txt
cat /proc/last_kmsg > /emmc/last_kmsg.txt
[/list]
Click to expand...
Click to collapse

You're kidding, right!?! If you make this work you are amazing and more power to ya!
Sent from my Evo V 4G using Tapatalk

GreyCelt said:
You're kidding, right!?! If you make this work you are amazing and more power to ya!
Sent from my Evo V 4G using Tapatalk
Click to expand...
Click to collapse
It's already working, as reported on the 4.3 thread.

I've only one question... When we can try 4.4 for p1000 ?!?
thanks thanks thanks
Stefano

Thumbs up buddy, awaiting your master piece and try testing!

Great works!

Is this AOSP or CM ? Can you post screenshots of the current build?
Thanks

adi6262 said:
Is this AOSP or CM ? Can you post screenshots of the current build?
Thanks
Click to expand...
Click to collapse
CM build, which actually includes AOSP code.

Guys what's your initial feel after playing with the kitkat build?
If you haven't done so, I suggest you convert to ART. After rebooting at least twice, you should notice your tab boots up real fast, your apps load fast....one of the new novel features of kitkat.
Sent from my GT-P1000 running KitKat

deleted

Thanks Terence & devs devs et all.......
Simple test report, especially dedicated to USERS, I test this rom withOUT wipe on purpose to see what happens, and it keeps popping up FC after FC, completely unusable, no easy way in, now that you hear it here, don't bother thinking.
Instructions by Terence is ALL GOOD.
phone is gone even with modem.bin, no phone number pad, wifi works straight out of box retained passwords, BT works retained paired, trebuchet settings are gone obviously, wallpaper retained. apks retained. rebooted several times to try something and always "Android is upgrade xx of 103 apps". first boot only 2 mins, not 20 mins, may be because I didn't wipe????
End.
terenceng said:
Guys what's your initial feel after playing with the kitkat build?
If you haven't done so, I suggest you convert to ART. After rebooting at least twice, you should notice your tab boots up real fast, your apps load fast....one of the new novel features of kitkat.
Sent from my GT-P1000 running KitKat
Click to expand...
Click to collapse

[ROM] SlimKAT [9.0][FINAL] [unofficial] [2015.01.11]

Welcome to SlimRoms SlimKat
Update 1. January 2015
SlimKat 4.4.4 FINAL 9.0
Mirror with all my files incl. NewLayout
This is an UNOFFICIAL build for HTC Endeavoru.
Please report any errors you find. See post 2 for known issues and Special Builds.
Mixed reports for using ART - thanks @oddyZR for this info.
Credits to the people at SlimRoms, that again found new ways to improve the Android experience.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits and/or respect to people, that refuse to let the HOX die:
audahadi
eyosen
LorD ClockaN
Thömy
Xmister
xzzz9097
VIPER520 & ZhuHang for Viper4Android
EveryoneElseThatDeserveRespect
SlimRoms changelog
SlimRoms gapps
My sources
​
Installation
Requirements: Your device must be unlocked via htcdev.com. There are many guides for this
0)
Make sure your USB drivers are up to date and working. See bottom of this post.
1)
First things first:
Backup your programs/data.
Use your existing recovery to backup your current ROM/Data.
2)
For KitKat you need a new Recovery with SELinux support
Download Thömys CWM6047 or Philz v.6.xx.x-endeavoru or TWRP 2.8.X.X to your PC
Note: You must unzip the image first if you choose Philz. Thomys and mine are ready to flash.
3)
Copy the ROM and gapps to your HOX
Unzip boot.img from the ROM to your PC
4)
Boot to bootloader. Use power button or "adb reboot bootloader"
Flash the new recovery and the boot.img from the ROM.zip
Code:
$ fastboot flash recovery slim-twrp-recovery.img
$ fastboot flash boot boot.img
$ fastboot erase cache
6)
Reboot to recovery.
Clear/wipe data. (You can skip this step if you flash over Slim 3.X)
Flash ROM
Flash gapps (flashing ROM will wipe the system)
Reboot
Please report any issues you find.
Some USB errors in Windows can be solved this way:
Small guide for solving problem with usb not working in Windows.
I never have usb problems with my Linux. It just works. Always.
But at work, my Windows7 like to change settings as it think is best for me. I guess it just don't know me well enough. Here is what I do when Windows get confused and forget what I want.
First make sure you have the latest drivers from Google and HTC.
Install latest drivers from HTC for your PC. http://www.htc.com
Next, get your adb/fastboot drivers updated.
Locate "android.bat", mine is in C:\Android\android-sdk\tools, but yours will be wherever you initially installed your adb drivers.
Run the file and install any suggested updates.
Windows device manager (run devmgmt.msc from start menu or a command window).
Connect your phone and check where it get attached. For a working connection, it should say "Android USB Devices" -> "My HTC", but since you read this, chances are, that your device is in "Other Devices" -> "Android Phone".
That is what this guide will correct.
1. Wrong driver - double click "Android Phone"
2. Update Driver
3. Browse (for your HTC driver, which is already installed)
4. Pick the driver yourself
5. Select "Android USB Devices" -> Next
6. Select "My HTC" -> Next
7. Choose Yes - You know you want the HTC driver
8. Ahhh, success - test your adb/fastboot/MTP/UMS
9. Here is what happened. We make Windows choose the correct driver and Windows will place it under Android USB Devices.
.

Updates & Issues
DL Links below to be updated!
All my files are now at AFH
Updates:
2014.11.07
SlimKat 8.10.2
Change log - please see slimroms.net
2014.10.25
TWRP Recovery 2.8.1.0
Changelog
2014.10.16
SlimKat 8.6.3 with LS-Notification, NetSpeed and BatteryBar
2014.10.15
SlimKat 8.6.1
Changelog: 8.4 + 8.6
Google sign in problems This helped me two times, but other were not that lucky:
Update gsm! Flash com.google.android.gms.zip after flashing gapps.
2014.10.08
TWRP 2.8.0.0 Update
Recovery updated with MTP protocol. This is work in progress with a few quirks.
20140930 SlimKat 8.2
SlimKat 8.2 S - Normal friction (Slow scrolling, like aosp)
SlimKat 8.2 F - Low friction (Fast scrolling)
SlimKat 8.2.4 - Added: LSN + NetSpeedStatus + DTStatusBarToggle + BatteryBar
20140920 SlimKat 8.0.4 Special
SlimKat 8.0 + LSN + NetSpeedStatus + DTStatusBarToggle + BatteryBar
20140919 SlimKat 8.0.3 Special
SlimKat 8.0 + LSN + NetSpeedStatus + DTStatusBarToggle
20140914 8.0 PCFR
Fix/add APNs
Translations
Weekly 7.9 (SlimKat Extra)
Settings: Slimrecents card/text color
Add ADB over network tile
updated apns
more translations
Weekly 7.8 (not build)
Fix Recent Panel defaulting to white on clean flash
External_tinyalsa: Minor updates
Update APN list
Updates translations
20140830 SlimSpecial 7.6
SlimKat 7.6
+ LockScreen Notifications
+ BatteryBar (Top or Bottom)
+ Network Speed Indicator
20140822 SlimKat 7.6
Pure SlimRoms SlimKat
Customise Volume panel - Color it or make it transparent for gaming
Low friction = Fast Scrolling similar to Sense ROMs
20140822 SlimSpecial 7.4
SlimKat 7.4
+ LockScreen Notifications
+ BatteryBar (Top or Bottom)
+ Network Speed Indicator
USB OTG included in kernel (don't know if it actually works) ?
Install from Recovery:
Backup
Wipe Cache
Wipe Dalvik
Wipe System
Flash SlimSpecial
Flash your favorite Gapps
Reboot - Patience, this may take some time
First use may be very slow. Setup new features.
Reboot and let stuff "settle". Should run fine from here.
Optional: Flash kernel from ZIP if you want USB OTG.​
20140816 - SlimKat 7.2.1
More Slim actions.
Recents color and transparency.
Heads up at bottom.
Whether to disable system sounds during quiet hours.
Heads up functionality for messaging.
Added FLAC audio (thanks @Thömy)
Missing: OTG
20140721 - SlimKat 6.6
Changelog: http://www.slimroms.net
Issues: You tell me.
20140721 - SlimKat 6.4
JustArchi build.
Works very well. Only issue I found is GoogleCamera crash if using Lens Blur.
20140719 - SlimKat 6.4
JustArchi + Linaro4.9
Well....:
PlayStore graphics glitches
PowerAmp FC
GoogleCamera crash when rendering Lens Blur.
.
20140710 - SlimKat 6.2
Replaced DSP with V4A
Slims version of Heads Up
Quiet Hours redefined "setup your quiet times exactly like you want"
The rest.
20140703 - SlimKat 6 xtra
Adding Hover and Lock Screen Notifications
Small update to kernel. Might run fine with old kernel though.
2014.06.29
Pure SlimRoms Build 6
WiFi location is back if installing gms-5.0.81
Even better - PlayStore is updated with 5.0.82 - get it there if you can.
Click below for previous SlomRoms
2014.06.22
Back on track. Pure SlimRoms. A few optimisations. Build 5.95
2014.06.15
Installing: Dirty flash shoud be ok, but please flash boot.img!
SlimKat 5.8 - Hover - 2014.06.15
Hotspot fixed.
MMS fixed.
Hover preview.
ART not working.
2014.06.10
SlimKat 5.7 - 4.4.3 - 2014.06.10
Dialer colors partly fixed.
No Hotspot tether.
Mms with small unusable pictures (standard).
Navigation stop working approx 540m before you arrive at work.
Fix for Mms & Hotspot - might even solve Navigation problem as well. Please report if working
Flash boot.img !!! + Flash zip from recovery.
2014.06.09 Dialer colors fixed.
SlimKat 5.7 -4.4.3 - 2014.06.09
This is new android v.4.4.3! Although dirty flash is possible, I highly recommend a fresh install:
Backup your apps.
Create full backup from recovery (in case you want back to 4.4.2)
Wipe system (mandatory)
Wipe data (optional)
Flash ROM and gapps (new gapps available)
2014.06.02
SlimKat 5.6 2014.06.05
Trying to fix network connection problem.
2014.06.02
SlimKat 5.6
Local Build:
- Update tool chain to GCC4.8 for Build and Kernel
SlimRoms:
- Pulse Torch on Incoming calls
- Pimp-up QuickRecord Tile
- Add transparency to Glowpad background
- Shake sensitivity adjustments
Issue:
Very slow or no network connection.
2014.05.22
SlimKat 5.4
- Allow All Widgets On Keyguard
- Add ffmpeg audio&video codecs
- Lots of awesome TRDS updates!!!
- Updated vendor files (TheMuppets)
- Checkout the latest Slim-GAPPS
2014.05.22
Build 5.2a
Fixing bootloop...
2014.05.19
Build 5.2 Shake It more edition.
No dictionary & swype for your language ? --> Here!
Note on hard button lights:
Navigation - HW Buttons
You may have to toggle off/on/off to disable. Try a few times if not turning off first time.
Light is full power Go to /etc/init.d/99_slim_x and edit the last two lines, I use 20. ( min=1, max=255 ):
Code:
echo 20 > /sys/class/leds/button-backlight/button_brightness
chmod 444 /sys/class/leds/button-backlight/button_brightness
2014.05.14
Build 5.1 Shake It edition + New Gapps
Updating from SlimKat:
Boot to bootloader
fastboot flash boot boot.img.
fastboot erase cache
reboot to recovery
(backup if you want)
WIPE/FORMAT SYSTEM - (no need to wipe your data)
WIPE CACHE & DALVIK
Flash the ROM.zip
Flash the latest gapps
Reboot
Enjoy
Coming from other system: You can try procedure above, but if something in system fail do the following:
Backup all your programs and program data
Boot to bootloader
fastboot flash boot boot.img.
fastboot erase cache
reboot to recovery
(backup if you want)
WIPE/FORMAT SYSTEM + WIPE/FORMAT DATA (factory reset, but be careful not to erase your sdcard)
WIPE CACHE & DALVIK
Flash the ROM.zip
Flash the latest gapps
Reboot
Restore your programs & data
Enjoy
2014.05.06
Build 4.9
Included in /etc/init.d/99_slim_x (edit as you want it)
DEFAULT:
Code:
Sweep 2 wake - ON
Direction dependent - YES (Left: off | Right: on)
Distance:400
Button Lights - OFF (almost)
Put # on 4 lines to revert to normal light in buttons
Reboot for changes to take effect.
WiFi location not functional on Googles latest Location Apps.
Found that vol controls BT, if BT is just turned off. Toggle BT on/off may fix it.
2014.04.29
Weekly 4.8
Added config for s2w and button-lights. Edit file /etc/init.d/99_slim_x
2014.04.23
Shake to Secure.
WiFi location not functional on Googles latest Location Apps.
Found that vol controls BT, if BT is just turned off. Toggle BT on/off may fix it.
2014.04.17
SlimKat 4.4 - weekly
Small change to sepolicy in the kernel (boot.img). Not needed for upgrade. To be honest, I don't think it make a big difference. But the logs look better now
2014.04.09
Build 4.2
Fixed low level sound recording on video.
Removed nvidia perfhud, flooding logs.
Lots of small fixes from Slim. Most are for other devices though.
Lost WiFi hotspot again (replaced CM source with AOSP)
2014.04.03 2014.04.02
Build 4.1
Slim updates. Thanks @Iwarsson :good: Sorry - no blue buttons yet
Added experimental code for EAP-SIM. 3 changes at aosp, all marked "Needs Code-Review".
WiFi note: If your wifi gets "locked" (can't turn on or off): Toggle Airplane mode on-off. Should reset wifi-settings error.
This should only happen if you play with SIM settings. Let's see.
NEW GAPPS - AGAIN
d1n0x: Problems connecting with eap. on 04.03 build. Replaced now with "normal" build 2014.04.02
Video recording use wrong microphone, Very low sound.
2014.03.25
Build 3.10
Added code for EAP-SIM/AKA - code is completely untested and still in review at aosp.
Please go to SlimRoms for changelog
GAPPS is updated again 24+25 March. Download at SlimRoms|Downloads|Addons 4.4
2014.03.18
Recents for lefthanded. Resized recents.
GAPPS updated (keyboard error fixed).
2014.03.15
Added camera 16:9 profiles, wide-sizes in Slims source not usable for HOX
Fixed LED notification, thanks Thömy (Flash boot.img for this fix).
Updated audio routing, "it mostly fixes audio input, not the output".
2014.03.11
Build 3.6
A few updates to Browser.
Improvements to Notification Reminder
Improvements to Slim Recents
2014.03.06
Build 3.4
Camera: Some reports of green tint when using flash. Please confirm.
There is no visible notification when headphones is used.
2014.02.28
Build 3.2
2014.02.19
"Stable" Build 3.1 released.
WiFi / BT need testing!
2014.02.11
RC3 released.
SlimPIE, new Dialer, exposed fixes.
2014.02.06RC2 released.
Lots of bug fixes from SlimTeam.
Added support for XposedNote (for history only, not relewant since 9.feb: As Lloir points out there was is a security issue with current implementation.
SELinus are ment to lock down your data, so sneaky apps cannot access it.
This "workaround" to make Xposed work, may let bad behaved modules get to that data.
However this risk was always there in JellyBean and previous releases. It'a all up to you.​2014.02.01WiFi HotSpot​
Not working....
Echo at receiving end ...? Some reports say it is good now
WiFi hotspot
Notification light may blink even without notification ?
Audio distortion ? Uninstall DSP seem to help
Bluetooth works only if wifi is on. Works fine on my phone now. Build 3.2 / Build 3.4
Call: Not able to adjust sound.
​

teemo said:
Not working....
Echo at receiving end? ...... please test
WiFi hotspot.
Click to expand...
Click to collapse
:victory:
Congratz to your new thread! And to a really nice nice rom.
Running it now a couple of hours...and it is as nice as before without the "bugs" it had.
Really BIG Thanks!
No echo bug for me
But WiFi Hotspot unfortunately confirmed not working.

Hey thanks for the rom will try it and add to the OP what this ROM is about and maybe what's the difference between CM and SLIM
Gesendet von meinem One X mit Tapatalk

cappuccina said:
:victory:
Congratz to your new thread! And to a really nice nice rom.
Running it now a couple of hours...and it is as nice as before without the "bugs" it had.
Really BIG Thanks!
No echo bug for me
But WiFi Hotspot unfortunately confirmed not working.
Click to expand...
Click to collapse
Lol no, the echo is not for you - it's for the other part
I had one complain - not sure how reliable though.

Yay! Finally the good cookie has been served.
Downloading.....
Is the "signal drop" bug ironed out?
I didn't have any major complain except that
on past betas.
Will report how it works t'morrow.
Thanks!

Thanks teemo. Good to have slim for hox.

Rowlf said:
Yay! Finally the good cookie has been served.
Downloading.....
Is the "signal drop" bug ironed out?
I didn't have any major complain except that
on past betas.
Will report how it works t'morrow.
Thanks!
Click to expand...
Click to collapse
"Signal drop" should be gone now. But let's give it some time and see.
Actually it was not a signal drop. It was simply the Phone App getting killed. When restarted, it would ask for PIN as it should, which was very annoying.

Impression of first few hours :good:
Initially due to low dpi, I had to use a microscope(almost),
but increased it to 320 everything looks revealing and beautiful.
Everything is working perfectly. ROM is totally smooth and snappy.
A number of annoyances has been reduced/removed.
Battery life(seems to be stable but will decide later).
Upd(04-02-14): The memory leak bug suddenly appeared.
After reboot I tried to turn on bluetooth without turning on wifi
and bluetooth share has stopped error came so I didn't take kmsg.
Bluetooth working fine.
Upd(30-01-14): Battery life seems to be pretty awesome here.
Screen-on time doesn't drain much. And BT is finally working properly.
Greatly relieved that memory leak bug is fixed(hopefully) since the
rom didn't go zero to crap in few hours, unlike other KitKats.
Things to improve(top-medium priority for me) :angel:
- Enable 3-dot menu by default since H/W recent is set to recent apps
(I know I can change recent to menu but 3-dot is convenient)
- Vibration strength should be reduced, currently its causing mini-earthquakes in my room
(Don't know if any option is hidden somewhere, will look for it)
Wishlist(low priority for me) :fingers-crossed:
- Working Wi-Fi tether
- Working Wi-Fi direct(assuming same as CM)
- Theme chooser
Note: My priority is not equal to developer's priority,just expressing my opinion. No pressure, no demands.
Thanks for the great rom. Looking forward to more developments :laugh:

Great I will give it a try tomorrow ! Thank you teemo...

Extremely good work, keep up this great update. Is the most battery friendly rom i have tried after sense. Thanks for keeping the support to hox

Great to see this topic!
Thanks teemo
Sent from my EndeavorU using Tapatalk 2

nice rom , will try it later

Will try this Rom soon , thanks for making it!
Sent from my HTC One X using XDA Premium 4 mobile app

Nice job. Maybe i'll try later, but i need wifi tether for daily use. It's works in CM11.
S2W included or need Trickster Mod? Button backlight notification?

Great job guys, it seems to be very stable.
Just 2 questions....
Is there a way to have profiles?
How get the one shot bouton to erase history of apps?
..sorry for my broken english....
Sent from my Galaxy Nexus using xda app-developers app

Hi teemo thanks for this awesome rom!
Just a question: is it normal that while playing music if I tap on the screen or change task I get sound distortion?

Mat08.cc said:
Hi teemo thanks for this awesome rom!
Just a question: is it normal that while playing music if I tap on the screen or change task I get sound distorsion?
Click to expand...
Click to collapse
Doesn't seem to be normal. I don't have it.
I can go through the menu open app etc without sound problems.
Have you made a full wipe?
Installed a sound mod like v4a?
sent from my slimmed Kitty Kat
---------- Post added at 10:02 AM ---------- Previous post was at 09:58 AM ----------
teemo said:
Lol no, the echo is not for you - it's for the other part
I had one complain - not sure how reliable though.
Click to expand...
Click to collapse
Sure I know that.
It's just after I installed it over 27th build, right after you send me the link I thought I didn't have it (or the other part , I checked myself because I also looked about the phone app crash issue)
But now after full wipe I do have it also unfortunately.
Also tried with xm#16 but still present.
Nevertheless great rom again.
sent from my slimmed Kitty Kat

cappuccina said:
Doesn't seem to be normal. I don't have it.
I can go through the menu open app etc without sound problems.
Have you made a full wipe?
Installed a sound mod like v4a?
sent from my slimmed Kitty Kat
---------- Post added at 10:02 AM ---------- Previous post was at 09:58 AM ----------
Sure I know that.
It's just after I installed it over 27th build, right after you send me the link I thought I didn't have it (or the other part , I checked myself because I also looked about the phone app crash issue)
But now after full wipe I do have it also unfortunately.
Also tried with xm#16 but still present.
Nevertheless great rom again.
sent from my slimmed Kitty Kat
Click to expand...
Click to collapse
I always make a full wipe no sound mods ( I can't even install v4a driver.. ) I noticed that this is happening only with some songs.. it's strange..

Mat08.cc said:
I always make a full wipe no sound mods ( I can't even install v4a driver.. ) I noticed that this is happening only with some songs.. it's strange..
Click to expand...
Click to collapse
Hmm ok.
Maybe try different player?
Haven't tested v4a yet but will do soon...
Edit:
Have you tried latest version? You could also try to disable or unistall dsp manager.
Or of you cannot install drivers because of Super user try a different app.
sent from my slimmed Kitty Kat

[EXPERIMENTAL][AOSP][NRD90U] Unofficial Android 7.0 Nougat build

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hello guys, this is an unofficial build of AOSP Nougat (with tag android-7.0.0_r6). Kernel is based on CM13's, with some recent commits in kernel/common in AOSP. Sources and patches are available at the end of the post.
Note: this ROM is just for having the first taste of Nougat, and thus missing a lot of key features. I may not be able to update it regularly.
Basic hardware functionality:
Almost everything works, except video hardware encoding, which causes camcorder to fail. HW decoding works though.
Everything should be working since 20160903.
I didn't find more hardware failures, but there can be more.
And remember, the proprietary firmwares and blobs are still in the age of Marshmallow, and a system won't be complete without corresponding firmwares and blobs.
Known bugs:
1. HW disk encryption is likely broken. I reverted some commits to make cryptfs_hw build, but I'm not sure if that works. Do not try it.
2. SELinux is permissive, and init allows service without a SELinux domain to start.
3. GPS may take longer to obtain a position fix. (yes it's working... sorry for the misunderstanding)
4. Only Launcher2 is included. You may install a new one as you like.
5. No LiveDisplay and gestures except DT2W (DT2W can not be turned off via Settings app for now) Color calibration is possible, see FAQ below.
6. Default input method could be broken. Be ready to "pm install your_ime.apk" in adb shell. Fixed in 20160828
7. com.qti.dpmserviceapp may produce continous FC. You can disable it via adb shell ("su -c pm disable com.qti.dpmserviceapp"). Removed in 20160828
8. Rotating screen while playing video can cause the display to "split" Fixed in 20160903
9. Camera service and media codecs all run in the same process, eliminating one of the security enhancements of Android N. May not be fixed until new HAL and blobs are available.
So the security improvements in Nougat are not making much difference in this only-a-taste ROM. If you rely on this, it would be better to wait for official releases.
FAQs:
1. Root / Gapps?
I'm using SuperSU 2.76 stable and OpenGapps 7.0 pico. They work without any issue.
If your contacts / calendars is not syncing, try the following steps:
1. Goto Settings > Apps, tap "Show system" in menu
2. Find "Google Contacts Sync", tap on it, tap "Permissions", turn on everything
3. Go back to Detail screen, clear its data
4. Go back to app list, clear "Contacts Storage"' data
5. Do the same for calendars (2-4)
6. Reboot
Click to expand...
Click to collapse
2. F2FS?
I did not test this myself... But kernel has support already (of cource, it's from CM) so you may have a try. Remember to backup!
EDIT: Some users reported that F2FS partitions are corrupted. If you are using F2FS, maybe you should wait.
Click to expand...
Click to collapse
3. Menu key / App switcher?
Menu key now acts as recents, since I don't think the former is as useful as the latter. And there is no more lag while tapping home button since we don't check for double tap anymore.
Click to expand...
Click to collapse
4. TWRP shows error?
If that's two lines of "log", you can safely ignore it.
If there is something else, please stop and post it here.
If you are using MultiROM, you may modify update-script. Read the first ~8 pages and you will find it.
Reference: I'm using official TWRP 3.0.2 w/o MultiROM This recovery didn't get replaced by stock one...
Click to expand...
Click to collapse
5. File manager (to install APKs)?
http://forum.xda-developers.com/showpost.php?p=68402423&postcount=73
Click to expand...
Click to collapse
6. Disable HW keys, enable soft keys, screen color calibration?
Disable HW keys: echo 0 > /proc/touchpanel/keypad_enable (needs repeat on reboot)
Enable soft keys: echo "qemu.hw.mainkeys=0 >> /system/build.prop (once)
Screen color calibration: echo "32768 31784 27852" > /sys/class/graphics/fb0/rgb (needs repeat on reboot, change the values as you need. This example is 100% R, 97% G, 85% B)
Optionally you can enable color enhancing: echo 1 > /sys/class/graphics/fb0/color_enhance
Click to expand...
Click to collapse
Screenshot spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing Guide by @The Dork Knight Rises
In the 3rd post. Direct link: http://forum.xda-developers.com/showpost.php?p=68397804&postcount=3
Video hands-on by @savadam
https://www.youtube.com/watch?v=r54vWk-Azh8
Thanks for all your support!
Download:
20160919: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpAYWRKd1owSUNudEU Mirror 2: https://mega.nz/#!fEk1CTyJ!F8rdnqT_oiipP-tHCuzFGFvsQGmUV6LRaD2t81N2WIA
You can still use HALs from 20160906 if you want.
(And if you are posting this somewhere else, please include the HALs in your post)
Older versions:
20160918: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpAMWZ4OEx6Unp5bU0 Mirror 2: https://mega.nz/#!rdlkgboI!LQuFDtcppbizC_7Tfww1uWAmhw-lYuxjAlrhg9Z0tuQ
20160910: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpAdGVTV3V0ekZaWHM Mirror 2: https://mega.nz/#!XEsTESpR!QDa7he2jdPCeIsbMY1vJAlCZ0RokAKV0IdtyuB0R-yc
20160906: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpAWHNFb0xyYlBZM3c Mirror 2: https://mega.nz/#!zBVX1DTZ!S-LnpIEgJqn1r7So6QmEoD_APUqDnp93XbP-Ug__XBk
CAF and original AOSP HALs: https://drive.google.com/open?id=0BwkmhbR5VHpAaGdCQmxDUWgxQlU
Note on the HALs:
AOSP HALs (msm8996 display + msm8974 media) can not record screen, but they "seem" to make the system smoother. (msm8974 display HAL cannot be used because it corrupts the display when rotating screen with video playing)
CAF HALs (both based on vanilla CAF LA.BF.1.1.3_rb1.13) can record screen but "seem" not to be so efficient as AOSP ones.
The HAL included in the ROM are the AOSP variant.
20160903: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpATlN5T29WTS01Qkk Mirror 2: https://mega.nz/#!OcFlTDDK!EYiNpfE-9Pxx2wu4Oto7kO_oevfe0bMkXOTdhP1HDZc
20160831: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpAVE1WR2xYd180MzA Mirror 2: https://mega.nz/#!jE92iSAD!pl0NMU6PPY3UNXE5DTDBKLUd4sFLG6fNTaUUMI0xdzg
20160828: Mirror 1: https://mega.nz/#!XdlXFDBQ!p7E0N64IEkGHn4GBzOZQDTCgR4KdD00O0dRwJlEnvcw Mirror 2: https://drive.google.com/open?id=0BwkmhbR5VHpAczA2T2g0RUZRS3c
20160827: https://drive.google.com/open?id=0BwkmhbR5VHpAUVdWUHNlc0lHZWs
Note: please read "known bugs" section before flashing! Also you can read the guide below.
When updating the ROM, just dirty-flash new build and Gapps (if you use them).
In order to prevent your recovery from being replaced by the stock one, flash SuperSU along with the ROM.
Sources:
Kernel: https://github.com/updateing/android_kernel_oneplus_msm8974/tree/nougat
Device: https://github.com/updateing/android_device_oneplus_bacon/tree/nougat
Build system: https://github.com/updateing/platform_build/tree/custom-kernel
And there are a lot more repos I didn't fork. The changes there as well as local_manifest are here:
20160918+ Check GitHub
20160910 https://drive.google.com/open?id=0BwkmhbR5VHpAcmo1RjhPd0N1c3c
20160906 No new patches except the HALs. For AOSP HALs, check previous patch archive and Sony's guide. For CAF HALs, just cherry-pick "Fix clang build" from CM.
20160903 https://drive.google.com/open?id=0BwkmhbR5VHpAQXFqZEJCT21UNDA
20160831 https://drive.google.com/open?id=0BwkmhbR5VHpASW54QnR4eGFlR1E
20160828 https://drive.google.com/open?id=0BwkmhbR5VHpAOEx2OWNYcE1xU2s
20160827 https://drive.google.com/open?id=0BwkmhbR5VHpALXdkNkptRnBLMkU
Changelog:
20160919
Fixed Fackbook crash by avoiding preloading libboringssl-compat.so (CM camera HAL is the only camera HAL that does not require this)
Updated BT configuration (please test if it has any side effect. Sometimes you need to search twice to find your Bluetooth gadgets.)
Tried to fix network location (added Google's network location provider)
20160918
Reverted to previous "stub" power HAL. May fix lagging and unusual power consumption noticed by some users.
Tried to fix NFC FW download mechanism. May fix non-working NFC for some users.
20160910
Updated to NRD90U (android-7.0.0_r6)
Switched to CM/QCOM power HAL. The original power HAL is more like a placeholder.
Now on Tap can be launched by long-pressing home button
Switchable WebView implementation, thanks to @fards here
Note:
1. If you are experiencing display issues (such as screen flicker with FLV SW decoding), try switching on "Disable HW Overlay" in Development Settings.
2. If you need multi-user feature, remove /system/priv-app/com.qualcomm.location. Otherwise the system will crash. It was accidentally added in this build.
20160906
Switched back to AOSP HALs to increase performance, but screen recording is broken again. You can choose CAF HALs listed above to fix that. Camcorder and HW encoding work with both variants, no need to worry.
Updated media profiles. Front camera knows that it is not capable of 1080p recording.
20160903
Fixed HW encoder and camcorder (they are different issues, though related) (and switched to CM13 media HAL)
Fixed display corruption while rotating screen with video playing (by switching to CM13 display HAL, don't know which lines of code fixed that)
DT2W can be turned off via Settings
Added Reboot option in power menu
20160831
Fixed crash in World Clock page when selecting countries/regions
Fixed hang in Developer Settings when the ROM is installed as secondary
Fixed crash when taking photos with HDR on
Added support for kexec
Added Stk
20160828
Fixed default input method FC
Remove com.qti.dpmservices to prevent FC
Dev: updated build system to finally automate everything
20160827
Initial build
Click to expand...
Click to collapse
Notes on the sources:
1. Build system produces correct boot.img in $OUT, but the boot image in OTA zip still has no DT included. Fixed in 20160828
2. Some fixes are really "dirty" (as I'm not able to find a proper way)...
3. Some JNIs fail to build (lots of C++ symbols no found). You may try linking C++ libs dynamically (c++_static -> c++_shared) to avoid this. See 20160828 patches, packages/inputmethods/LatinIME for example.
4. Some apps require android-8 ndk, but the earliest version in the tree is android-9. A symlink will do (or you can change the Android.mk in app) but I'm not really sure this will not introduce any bug.
5. Android N split mediaserver into multiple processes to improve security, such as cameraserver, mediacodec, etc. But camera blobs and old HALs were not designed like this. They assume they run in the same process, thus a buffer created by blobs are being used everywhere, which will cause illegal memory access under Android N. I reverted lots of patches about this, forcing camera and codec services to run in the mediaserver process as before - security compromised with functionality, again.
Hope you enjoy this.

I am going to try this out, thanks @updateing for your work:good:
If I could find fixes then I would send an pull request.

The All-In-One Post
Oh look at the time...it's flashy time already? XD
Screenshots:
(Layers themes work. Use Substratum app)
Guide to flashing this properly (TWRP v3.0.2-0):
(THIS GUIDE IS MAINLY FOR THE FIRST BUILD 20160827. AS I AM RUNNING IT SMOOTHLY, I DO NOT PLAN TO UPDATE TO 20160828, AS IT HAS SOME MINOR FIXES, ALREADY COVERED IN MY GUIDE.
IF HOWEVER, YOU'RE FLASHING 20160828 OR LATER BUILD, HERE'S WHAT YOU SHOULD DO DIFFERENTLY:
-Flashing Google keyboard is not mandatory, as default input mode has been fixed
-adb steps do not need to be performed as the com.qti.dpmserviceapp has been removed
-You probably shouldn't flash the SystemUI Tuner mod zip, as the SystemUI APK from previous build may not be compatible with new build. If you flash it on 28 build and have SystemUI FCs or missing SystemUI, just reflash ROM, and don't flash the mod.
REST OF THE GUIDE REMAINS THE SAME)
(This guide is for flashing as primary ROM without MultiROM. MultiROM guide by @7u5h4r: http://forum.xda-developers.com/showpost.php?p=68413163&postcount=242)
TL;DR version (that means short version)
http://forum.xda-developers.com/showpost.php?p=68552389&postcount=1172
Download ROM zip from OP and Google Keyboard flashable zip, as well as any of the zips I linked below.
Wipe your device (data, cache, dalvik/ART cache; preferably even system, just to be as "clean" as possible)
(NOTE ABOUT DIRTY FLASHING:
-If you dirty flash this ROM (eg. flashing newer build), you will need to flash GApps again along with the ROM zip as GApps are not preserved
-This ROM actually booted for me even on a dirty flash from an MM custom ROM, and as a result I didn't face a lot of the problems you'd face on clean flash (GApps crashes, continuous qti app FCs, etc)
But a lot of my apps were crashing until I reinstalled them, and in any case, it is not advised to dirty flash when coming from MM)
Flash ROM zip and keyboard zip, optionally any of the following addons (DO NOT FLASH GAPPS YET):
-SuperSU (v2.68+) for root
-Any of the mods I linked below
-Any other mods like Viper4Android etc (AT YOUR OWN RISK)
Boot into the ROM. you'll probably see a lot of crashes, ignore them, and just find a PC for the next step
(Optionally, you could try to enable Developer Options by tapping past the FC dialogs, once you have DevOps enabled, you'll see an option to mute FC notifications till next boot)
Using ADB on your PC, disable the com.qti.dpmserviceapp package by running following commands:
Code:
adb devices
You should see a device in the list of devices connected
Code:
adb shell
pm disable com.qti.dpmserviceapp
If you get error with permissions, you may need root. If your device is rooted:
Code:
su
pm disable com.qti.dpmserviceapp
(SKIP 6, 7 & 8 if you do not need Google services)
Now reboot into recovery and flash a compatible GApps package (USE 7.0 GAPPS ONLY)
Boot into ROM
Go to Settings>Apps
Find Google Play Services, and go to its Permissions. Enable essential permissions. Now Play Services won't keep crashing on you. Also find Google Contact Sync and give it permission to access Contacts.
Go to Settings>Accounts and add your Google account
Profit
Praise DuARTe
Hit Thanks if this helped
Here's some helpful zips for you guys!
My flashable zip to ENABLE Navbar/softkeys (same as the one on the MM thread) https://drive.google.com/open?id=0B2Y1syM7UNuDYVRhM3BTYVA3SXc
Flashable zip to DISABLE HW keys
https://drive.google.com/open?id=0B2Y1syM7UNuDSFZwUHNLQ0RfdXM
Flashable zip to ENABLE HW keys (revert changes made by zip above)
https://drive.google.com/open?id=0B2Y1syM7UNuDalVLVzd0SFdLekk
Flashable stock bootanimation (same as the one in MM thread; since this ROM doesn't really have a bootanimation and uses the basic fallback bootanimation)
https://drive.google.com/open?id=0B2Y1syM7UNuDelFPZVh6dmxSR2c
Flashable zip to ENABLE Hidden SystemUI Tuner Features (thanks to @AL_IRAQI, see his original guide here)
This one was tricky, my first time decompiling an APK. I was getting some crashes at first, but I think this ZIP should work fine (I tested it on a dirty flash, and it works)
https://drive.google.com/open?id=0B2Y1syM7UNuDd0JBV2ViMXl1bnc
Flashable Google Keyboard 5.1
https://drive.google.com/open?id=0B2Y1syM7UNuDbnBmdEtWZlRlNlk
Flashable Nexus Launcher (credits to uploader)
https://www.androidfilehost.com/?fid=24588232905722237
Replace the stock Power Menu with an extended custom power menu (thanks to @nofx161):
See his post
Link to app
Layers themes are supported, use Substratum app (Play Store link) to apply
(ROOT NEEDED)
NOTE: Themes made only for Substratum will not work (properly) as this ROM doesn't support Substratum (that will need patches to ROM source). Only which support RRO/Layers will work without any issues.

Wow! Great work
Subscribed!

thanks for your work dude

Cool, thanks, gonna try asap
Enviado desde mi A0001 mediante Tapatalk

Great! Thank u dev!

updateing said:
2. SELinux is permissive, and init allows service without a SELinux domain to start.
Click to expand...
Click to collapse
Which sepolicy did you use? I am porting to a different device and Im currently trying to fix neverallows which is painful but I think I merged a commit to qcom/sepolicy which allows domain to start (im not very good in sepolicy). Its based off Cyanogenmod qcom/sepolicy repo. If you want to take a look its here android_device_qcom_sepolicy-1 and I had to add one thing to platform_system_sepolicy. I hope we'll be able to fix sepolicy soon.

Awesome.... Downloading already.

Awesome! Has anyone tried If gapps work?

Flashed it. But i get a FC all the time
com.qti.dpmserviceapp has stopped.
I cant do anything..?

Deltastylez said:
Flashed it. But i get a FC all the time
com.qti.dpmserviceapp has stopped.
I cant do anything..?
Click to expand...
Click to collapse
Really sorry that I forgot this. You could do "pm disable com.qti.dpmserviceapp" in adb shell (su first if it asks so)

A fellow hamster I see! Nice one.

updateing said:
Really sorry that I forgot this. You could do "pm disable com.qti.dpmserviceapp" in adb shell (su first if it asks so)
Click to expand...
Click to collapse
I am kind of a newbie to ADB
Could you perhabs tell me how to? step a step?
Thanks!

Deltastylez said:
I am kind of a newbie to ADB
Could you perhabs tell me how to? step a step?
Thanks!
Click to expand...
Click to collapse
You may find a lot of adb tutorials around...
But if there is a mute option in the FC dialog, you can mute it and disable in Settings.

updateing said:
Really sorry that I forgot this. You could do "pm disable com.qti.dpmserviceapp" in adb shell (su first if it asks so)
Click to expand...
Click to collapse
updateing said:
You may find a lot of adb tutorials around...
But if there is a mute option in the FC dialog, you can mute it and disable in Settings.
Click to expand...
Click to collapse
well, getting this error
" Error: java.lang.SecurityException: Shell cannot change component state for com.qti.dpmserviceapp/null to 2 "
Never mind, fixed

updateing said:
You may find a lot of adb tutorials around...
But if there is a mute option in the FC dialog, you can mute it and disable in Settings.
Click to expand...
Click to collapse
i've tried through adb shell but it doesn't work shell cannot change component state for com.qti.dpmserviceapp/null to 2 moreover it is not possible to disable it in settings thank u for your job

anyone!! please any reviews??

Knew it wouldn't be long before the famous Bacon machine got that great taste of nougat :good:

holy crap holy crap
EVERYONE BOARD THE HYPE TRAIN! CHOO CHOO!