[DEV][UNOFFICIAL]CyanogenMod 7.2-GIO[Update: April 26, 2012]

[DEV][UNOFFICIAL]CyanogenMod 7.2-GIO[Update: April 26, 2012] - Samsung Galaxy Gio GT-S5660

Android 2.3.7 - Cyanogen Mod 7.2.0 For Galaxy GIO
I am not responsible for any damage to your phone
From 2012-03-25 i change this version to Like NIGHTLY. why??? because this version is most like vanilla build from CyanogenMod team.
i only changes alittle code to make this rom perfect on our device.
So, dont request unofficial feature to this rom
My target is to make stable, fast & good power comsumption rom[/CENTER]
Current status:
Working:
RIL
proximity sensor
touchscreen with multi touch
keychar
storage mode
gps
compass
accelerometer sensor
microphone (both phone & headset)
headset button
Root & Busybox
call,sms,mms
auto rotate
packet data with automatically apn detect
GPRS, EDGE, 3G, HSDPA
wifi
hardware video acceleration
secret code
bluetooth
camera
static wifi mac address
audio & FM Radio
wired & hotspot tether
Backlight Notification
Not Working:
Sim Toolkit (maybe)
known issue:
some option are not working on setting (like: mute camera sound, etc)
slow loading png image on gallery
after use camera, governor force back to "ondemand"
Download link:
ROM
You can download from goo-inside.me
Patch
WARNING: you must choose select correct patch, depend on your rom!
Note: you only need to install latest patch for your rom. latest patch included all change in previous patch
Patch for CM7.2-02112012
patch-CM7.2-02112012-1.zip [OUTDATED]
Patch for CM7.2-RC1-b1
CM7.2-RC-1-patch-4.zip - (2012-01-30) [OUTDATED]
CM7.2-RC-1-patch-3.zip - (2012-01-28) [OUTDATED]
CM7.2-RC-1-patch-2.zip - (2012-01-20) [OUTDATED]
CM7.2-RC-1-patch-1.zip - (2012-01-20) [OUTDATED]
PLEASE DO NOT MIRROR MY LINK
Source:
https://github.com/phiexz
Special thanks to:
CyanogenMod team
amarullz for Fantastic Aroma Installer
squadzone
ketut.kumajaya
psyke83
Maclaw
Donator
Nur Ahmad
T. William
go to next post to read changelog & how to install

How To Install
Flash latest Clockworkod Recovery:
skip this step if you have latest clockworkmod installed on your phone
Download latest ClockworkMod Recovery from This thread
Place it on root of your sdcard
reboot to recovery mode
install this cwm from recovery
Flash Cyanogenmod 7 ROM :
Download and copy the latest CM7 ROM to SD Card
Reboot to Recovery Mode
Select install zip from sd card
Select choose zip from sd card
Select the new CM7 ROM
Select Yes - Install update
Wait till the Installation is finish
Select reboot system now
NOTE:
It's not automatically wipe your data. if you want to install fresh rom, you must wipe data before install it!
If you from stock / custom rom based on rfs filesystem, u must flash ext4-formatter.zip before flash CyanogenMod. link & instruction can fount on This Thread. otherwise you'll stuck on android logo because it cant mount rfs filesystem!
have problem after upgrade from earlier cyanogenMod? you should wipe your data!!
Install & Enable a2sd Darktremor
Download dtapps2sd-2.7.5.3-beta04-signed.zip
Reboot to Recovery mode
mount your system & data, then Install it
After install, reboot your phone. it'll make your phone bootloop for 2-3 times
For Activating it:
go to terminal emulator and write:
su
a2sd zipalign
a2sd cachesdreset
if u want use a2sd extream (move data to sd-ext):
a2sd datasd
Install & Enable Simple2Ext (S2E):
install it from market. be sure u've install gapps before!
open s2e, and press menu and choose setting
checklist the advance mode, extended partitions info, mount as ext4
DON'T CHANGE READ BUFFER!! IT CAN MAKE YOU PARTITION CORRUPT
press back, and press menu -> reboot
if your phone not automatic reboot, u should reboot it manually
after reboot, open s2e again. u can check whatever u want
i'm check it all, except Application data (Application data = a2sd extream datasd)
reboot again
NOTE: if you cant activate S2E, i think your 2nd partition is corrupt. try to repartition it from PC

Changelog & Download Link
[ROM] patch-cm7.2-20120426.2-NIGHTLY-gio.zip
Revert some samsung's prebuilt library
Fix Audio routing to headset
Add missing sec_key keychar
[ROM] patch-cm7.2-20120426-NIGHTLY-gio.zip
update samsung's prebuilt binary & library
fix unstable ril daemon when in 2G mode
[ROM] patch-cm7.2-20120422-NIGHTLY-gio.zip
FIX: Video HW Acceleration
[ROM] CM7.2-20120421-gio-NIGHTLY-AROMA.zip
Changes by me:
AROMA: Update Aroma Binary
Change Experimental Kernel to v20120420
Many Changes on Experimental Kernel
Remove Disable SetupWizard.apk
Fix disable YouTube Function
Update Goo-Manager App to v2.0.2
Update prebuilt library & modules
Fix camera info
More: http://github.com/phiexz
Changes by cyanogenmod Team:
fix "Skip on security" functionality
Allow theming of framework UI elements.
Fix Quick unlock bug
Fix Quick unlock bug
Update & Add many translation
Improove webkit (Let me know if u have problem with browser)
Improve GPS
and more, you can check it here and here
[ROM] CM7.2-20120325-gio-NIGHTLY-AROMA.zip
Changes by me:
AROMA: User can select theme
Add more apn
remove unneded tweak, more vanilla
update dhcpconf
goo-inside.me OTA support
fix libaudio (mute on call). by psyke83
Big update for kernel
kernel: 800Mhz instead 806Mhz
kernel: Default clock is 800Mhz now, instead 787Mhz
kernel: A lot tweak for improve performance
kernel: Add Zcache & frontswap. better memmory management
More: http://github.com/phiexz
Changes by cyanogenmod Team:
Ipsec-Tools: racoon: introduce authentication method parameter
Skia: improve API
Zlib: Update to version on adler32/slhash repo as of Mar 07, 2012
Framework: implement Motoblur-like fingerprint tactile feedback
ADW: add sortable apps list for catalog setup
CMParts: Add option to enable/disable the ICS rotation animation
Contacs: Fix soft keyboard appearing on dialer under certain conditions.
Contacs: Fix initial state for t9 sort mode
MMS: Added a max SMS length option
MMS: Fix cursor repeatedly moving back to beginning of To field
Phone: Improve toast strings
MediaProvider: Backport "disappearing SD media" fixes from CM9
and more, you can check it here and here
[ROM] CM7.2-03092012-gio-KANG-AROMA.zip
Changes by me:
Using AROMA Installer to install ROM
NB: if you use px-recovery, please update to verison 0.28
Include 3rd apps & setting for customize rom
Include latest Google Apps
A lot of change on kernel-20120309 from squadzone
improve libaudio. by psyke83
Changes by cyanogenmod Team:
Added many translation
Added build time on system info
Many bugfix, more stable
and more, you can check it here and here
[ROM] CM7.2-02242012-gio-KANG.zip
Changes by me:
remove unused tweak
cpufreq: tweak ondemand cpufreq
update libaudio from CodeAurora, thanks to psyke for fix libaudio for FM Radio & Mic
lib: add libmmomxcore & use libOmxCore from samsungs
improve gallery, but sometime still have issue with .png image
wlan: using official atheros tools, remove get_macaddress
sd-ext: now always mount as ext4. this change should fix any problem with S2E but not tested
updater-scripts: unmount before formatting device. this change for anyone who use px-recovery
Filemanager: Using source from squadzone. fix send files from filemanager
Changes by cyanogenmod Team:
fix alarm freeze on landscape mode
fix rotation freeze on screen off
and more, you can check it here and here
[Patch] patch-CM7.2-02112012-1.zip
L]
Working with Camera.apk
Fix video capture orientation
Remove wide option from video capture mode
[ROM] CM7.2-02112012-gio-KANG.zip
Many patch on kernel for better performance
Framework: Improved cached
Framework: Add screen rotate animation from ICS
Many new option on setting (Tablet tweak, lockscreen style, disable scrolling cache, custom carrier label, lock volume key, bootanimation, power button end call, and many more)
Fix: fixed wired tether. now not need 3rd application like wiredtether.apk (tested on my archlinux)
Fix: Create & Loading thumbail on Gallery3D. now much faster. but sometime slow on png image
Fix: Screen flickering when turn on phone & disable screen on animation
IMPROVE: 100% rendering use GPU
IMPROVE: more snappy rom
IMPROVE: better ram management
and other
[Patch] CM7.2-RC-1-patch-4.zip
[Download]
trying to fix screen on blinking (when u disable screen on animation), but sometime still blinking
sensors hack, it should decrease gmaps v6.x lag. please test it. not tested by me
now using RGBA8888 color
[Patch] CM7.2-RC-1-patch-3.zip
[Download]
reworking again with camera driver on kernel, please check about orientation now
change camera app with modded camera.apk by squadzone
fix Droidwall problem (please check)
screen on animation (enable it from cyanogenMod setting)
[Patch] CM7.2-RC-1-patch-2.zip
[Download]
fix charging when phone turn off
[Patch] CM7.2-RC-1-patch-1.zip
[Download]
fix camera orientation driver from kernel. include with new official camera.apk from cyanogenMod. yesterday we used unofficial camera.apk
improve video recording, now using AAC instead of amr for audio
change local version to perf-CL783107, included module for CL783107 (wifi,zram,tun & cifs)
improve usb mass storage stability
patch usb composite.c, hope will fix usb tether problem
[ROM] CM7.2 RC-1-b1
[Download]
Added many option on cyanogenMod setting
Change device name from GT-S5660 to gio
Fixed many bug
disable live walpaper by default, because live wallpaper make cpu & gpu extra work, hot & drain more battery
added lagfree & lulzactive governor
added 672Mhz cpu scalling
patch backlight to fix backlight problem after set brightness
added Backlight Notification (BLN) support. use bln controll to set it!
patch libaudio for better audio. please check it and let me know your opinion. is it better or worse?
Change hardware name from GT-S5660V to GT-S5660
[ROM] CM7.2 RC-0-b2 to b4
Please go to [DEV][2.3.7]CyanogenMod 7.2-GIO-KANG-RC0 build 4 thread to see changelog
[ROM] CM7.2 RC-0-b1
[Download]
First build cyanogenmod 7.2 rc-0 from source, with many bug & problem

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Downloading
I will be a tester.
---
Found bug :
1. Bluetooth can't received file from PC.
2. Can't sign google account in account settings.
3. android.process FC for 2 times.
4. Backlight always on (maybe the kernel?)
5. As phiexz said, camera wrong orientation.
---
i don't know what is the changelog from 7.1.0 RC 3.0. Galaxy Ace thread says that the changelog is under the hood (maybe the performance), not the cosmetics (appearance).

Downloading. Will install later and post any issues.

Can i upgrade directly from RC 3.0?

下载中，待会测试download and test

Culfa said:
Can i upgrade directly from RC 3.0?
Click to expand...
Click to collapse
Sure, i upgraded it from Rc 3.0

Upgraded from 7.1.0 RC3.0. Everything seems to work except the camera orientation. I've noticed a faster connection to the GSM and 3G network. In RC 3.0 it ometimes took ages to get a connection.

Is it non wipe like CM7 nightlies...
I dont want to redo everything again just to test...
I dont have problems with the previous version, but it is my second phone, only use SMS, calls, bluetooth, wifi and market...

gps
1. Gps not working, not even shows the icon in notification bar.
2. After a call, the screen remains blank, the proximity sensor have issues.
Back to RC3

fantastic! fast update
i want to try it, but not now

tried to install from rc 2. having troubles: at the boot appears a "android" logo and then nothing else. returning to rc2

ItachiSama said:
tried to install from rc 2. having troubles: at the boot appears a "android" logo and then nothing else. returning to rc2
Click to expand...
Click to collapse
i also had this, try re-running the zip in recovery agn, and reboot it a few times. i did this and it was okay.

Thanks for your reports about the bugs.
By the way, just for info.
I, friend of phiexz want to say this. Maybe phiexz will probably take a little longer time to fix the bugs because of his busy in college. He has so many task to do for his college, so he asked our help to find the bugs on 7.2 and post it here. Once he is not busy anymore, he will fix the bugs for us.
So, we have to be patience.

ok, because not many reacted on the update test, i just installed it over the RC3 without wipe or anything.
First look was ok, but no apps that where installed, so i rebooted again, and all is working, what was already on the phone.
Yes, camera has lost its direction and barcode scanner too .. but heck we know that ... link2sd still ok, wifi and 3G working, root explorer and google / gmail, Go contact, sounds market still working ... so no complaints yet ... other then the known issues oh wait Angry birds seasons still works !!
small correction, Gmail settings did not remember to synch email, but ticked that option again and its working
Correction (and wierd!) Qr scanner works ok (applied the fix on RC3) so cam scks but barcode scanner works

I cant connect to google account.
Fast discharged baterry, if I use only wifi, and 3G and screen light on 25%, 1% baterry per minute, its very bad. If screen is off, and locked, everything with baterry its okay (baterry is after callibration).
I not prefer ADW launcher, because it is slow, i Installed GO Launcher, and it is very faster than ADW on this ROM.
I've not found other bugs.

yonzz said:
Thanks for your reports about the bugs.
By the way, just for info.
I, friend of phiexz want to say this. Maybe phiexz will probably take a little longer time to fix the bugs because of his busy in college. He has so many task to do for his college, so he asked our help to find the bugs on 7.2 and post it here. Once he is not busy anymore, he will fix the bugs for us.
So, we have to be patience.
Click to expand...
Click to collapse
Thanks for the update.. Tell him to take his time.. Remember, the only rule on cyanogenmod, you don't ask for ETA.. ..

Camera and WiFi-mac fixed by me.
I'll upload new package soon.
Now it's fully functionally - only proximity sensor doesn't works.

Related

[ROM] Team Tiamat Xoom Rom 2.2.2 - Moray [9/10/11]

Download Center
2.2.2
Tiamat Xoom Rom 2.2.2 "Moray"
MD5sum: b8a2ca18954e63dad5aa6e704461ce9c
2.2.1
Tiamat Xoom Rom 2.2.1 "Moray"
MD5sum: 24c2afbade388cfb7a8d62b7fcef668d
2.2.0
Tiamat Xoom Rom 2.2.0 "Moray"
MD5sum: 50d5f7409dc865b29b67e213ff8cae5b
Bug reports & Feature requests
Forums are horrible for keeping track of bugs and feature requests. If you have a reproduceable bug, or a feature request, please create an issue for it at http://code.google.com/p/tiamat-xoom-rom/issues/list
Release Notes
2.2.2 Release Notes
Yet another update for the rom. Quite a few changes this time.
As usual, this can be flashed cleanly over 2.2.1.
-- solarnz.
2.2.1 Release Notes
You are able to flash 2.2.1 over 2.2.0 as it is mainly just bug fixes.
-- solarnz.
2.2.0 Release Notes
Boy has it been a busy last 2 weeks.
I have built a build system where we now do the majority of our coding in java. Yep java, not smali.
We now have quick controls, in the status bar settings menu.
This rom is mainly just a feature release. Unfortuantly if you had any issues regarding gmail in hammerhead, you will likely get the same issues in this release.
This rom is also still based of 3.2. Yeah I know I said I would be doing 3.2.2, but things change.
-- solarnz.
Changelog
Version 2.2.2
The browser UA string setting now sticks.
Reverted to the stock User Agent string.
Bluetooth tethering work-around
Removed the DigiNotar certificate (3.2.1)
Updated the market application (3.2.1)
New setting to load every module on boot (disabled by default)
Disable OTAs by default. You can turn them back on through the settings.
Ability to completely disable the software buttons through
Ability to turn on the european wifi channels in the settings menu.
Version 2.2.1
We now use the GMail.apk from the Asus Prime rom.
Re-implemented the shutdown (power) menu.
Brought in DSPManager from cyanogenmod. You can also access this through the Music2 Application.
Fixed various force closes in Music and Clock applications.
You are now able to enable wifi & bluetooth via quick controls while airplane mode is active. You will need to enable this through the quick control settings first however.
Disabling rotation in the quick controls will now freeze the rotation of the screen, instead of locking at the landscape position.
New adbWireless quick control
More support for the Hong Kong partition layouts.
Overclocking will now write the values to both cores.
Version 2.2
Quick Controls
Tiamat Settings - set your overclock on boot, and many more!
Extra command line applications - nano, powertop etc
Bash is now the default shell
New Wireless, Mobile and battery icons from bignadad
Browser now has a selectable UA string in the general menu, no more enabling the debug mode.
OSMonitor is now included.
There is a nice fortune displayed on the lockscreen now.
New boot animation by phokus
More stuff I can't remember
Version 2.1
Fixed all the application signatures - Google applications should update fine now.
All of the language packs are now incorporated into this rom
European 3g support should be 100% working now.
Native screenshot is back
Version 2.0.1
Replaced the battery icons with new ones from Nusince
Updated the maps application. NOTE: This is just a temporary fix, and we are working on a permanent fix.
Fixed up the euro build.prop
Version 2.0
Rebased off the 3.2 wifi image.
3G Support on Android 3.2
sdcard is now at /mnt/external1 and is viewable via MTP
Any application that can write to /sdcard can now write to /mnt/external1
usbOTG drives now mount at /mnt/usbOTG and act identically to the sdcard.
Now comes with the Katana 2.0 stock GPU kernel.
/MicroSD and /usbOTG synlinks to their respective locations in /mnt
Automatically modprobe all kernel modules, apart from the wireless module.
New wallpaper & charging icons
Version 1.1
Storage framework completely overhauled based on Transformer Rom Prime 1.5 (thanks Roach)
System now gives storage control thru status bar icon and in Settings / Storage
Unmount MicroSD, remove, put in another one for working Hot Swap
Automatically mount USB Host storage (unmount still broke do to borked vold.fstab)
All Android media services scan both internal and MicroSD for media (Gallery, Music, etc)
new native Transformer file explorer accessable thru status bar to explore all mounted storage
Unfortunately, USB Mass Storage is still broke. (It's turning out to be far more complex than it should be)
Entire rom re-signed with test key due to manifest changes for storage port. All services work 100% (Google music beta, Market, etc)
Implemented a variety of init.d scripts with "Tiamat Control" flags
Enable features by moving flags (/data/tiamat_controls) in or out of "unused" folder
Enable or diasble charging light while device on
Enable or disable logging for better battery life
sysctl memory tweak
Cron service enabled for time based scripts (put Cron scripts in /data/cron)
Rom zip-aligned on boot (still insanely fast boot time)
Included up-to-date Maps.apk and Video.apk
Removed bloatware (Cordy.apk, dungeondefenders.apk, and stingrayquickoffice.apk)
Changed back to mostly stock icons
Removed the charging percent text from the pull up settings.
When charging, it will now alternate between the battery percentage in the middle and a charging symbol.
Version 1.0 - Update 3 (Busybox fix)
Fixed the dependency that the ramdisk had on busybox, specifically run-parts.
Version 1.0 - Update 2 (charging light)
Enabled the led charging light in the ramdisk as per popular request.
Version 1.0 - 3g fix
Fixed permissions in /system/bin. This was causing issues with 3g connections.
Replaced framework-res.apk with a less modified version. There is no SIP calling and sms now, but the activation screens work now.
Tips
Automatically installing applications when you flash the rom:
In the zip file, under the directory "data" there is a directory called "tiamat_first_boot_install". You can place all of your apk files that you want installed when you first boot in there. This is useful for applications such as Thumb Keyboard and Titanium Backup

Moray 2.2 Modpacks
All of these mod packs can be flashed over the top of an existing Moray installation unless advised otherwise.
Mod pack 3 : Disable OTA notification ONLY FOR 2.2.0 & 2.2.1
MD5Sum: dd6291c50b815826ec18ee8acf89fa2c
Mod pack 2 : Stock User Agent String. ONLY FOR 2.2.1
MD5Sum: f795a79a37d811b9fe5464f393097c9d
Mod pack 1 : Stock User Agent String. ONLY FOR 2.2.0
MD5Sum: 9f0b2a117c3e2a578cccad5207f24851
Moray 2.2 Screenshots !!!

Tiamat Xoom Bactrack 5 Power User Expansion Pack

errr...where is the download link....
EDIT : Downloading now.....

Awsome, Really tks.
download link.......

Looks really solid guys, thank you for all of the hard work that makes my xoom so happy!

big tks,
waiting for download link

You guys are awesome running really good..
Thanks

1. setting alarm bug still exists.
2. In stock web-browser, when a type a random word on address bar , "xoom" for instance, then i hit "enter" , it does not automatically launch google search for "xoom" ?

Is this based on HC3.2.2 ?

tritran18518 said:
1. setting alarm bug still exists.
2. In stock web-browser, when a type a random word on address bar , "xoom" for instance, then i hit "enter" , it does not automatically launch google search for "xoom" ?
Click to expand...
Click to collapse
Yep, sorry I wasn't able to fix these issues. Hopefuly in the next release
daveba said:
Is this based on HC3.2.2 ?
Click to expand...
Click to collapse
Nope, still 3.2 sorry.

Argh I'm in work now
It will be another half of a day before I get myself some Moray goodness...

tritran18518 said:
1. setting alarm bug still exists.
2. In stock web-browser, when a type a random word on address bar , "xoom" for instance, then i hit "enter" , it does not automatically launch google search for "xoom" ?
Click to expand...
Click to collapse
Also have alarm bug ....but the browser one I do not get what u mean...I used the home screen top search bar....the browser address bar.....and the regular broswer search bar ...hit enter from keyboard and they all work fine.....I also did a fresh install ..so who knows
Sent from my HTC Sensation 4G using xda premium

Tito2007 said:
Also have alarm bug ....but the browser one I do not get what u mean...I used the home screen top search bar....the browser address bar.....and the regular broswer search bar ...hit enter from keyboard and they all work fine.....I also did a fresh install ..so who knows
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
OK, my browser problem is solved after I change my homepage to google.com and set UA string to desktop.

First impression : love the water boot animation. Still loading the boot animation.
EDIT : Done booting and saw new signal and battery icon. Nice. Only, when word '3G' nicely placed beside the signal. Only word 'H' overlapping with the arrow signal.

nice to see the the SD card persmissions are fixed!

Appears that the autorotation setting is broken... it will either toggle "on" or "upside down"
also torch doesnt appear todo anything
is the wifi dropout bug fixed in this release?
Sent from my Xoom using xda premium

mynameisjon said:
nice to see the the SD card persmissions are fixed!
Click to expand...
Click to collapse
May I know what you mean by 'SD card permissions are fixed'? Do you mean SD card is internal or the microSD card? Because I cannot delete any files inside microSD card except after changing the right using MicroSD Mounter.

Works fine so far.
When opening Music and switching to Genre or Interprets the Music App FC's.
It will do that until Force Stop and Clear Data from within the settings.
The Log mentions that the Error hast something to do with the piled Album images.
... MusicAlbumWallCallback.onRequestPileLableTexture(MusicAlbumWallCallback.java)

[ROM][S.U.R.F.A.C.E. v1.3] ♣ICS♣ Sam's Ultra-lite ROM Fast And Completely Expandable

[ROM][S.U.R.F.A.C.E. v1.3] ♣ICS♣ Sam's Ultra-lite ROM Fast And Completely Expandable
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Base: ICS 4.0.3 (Teamhacksung's Build 13)
Phone:XXJVU
Apps and Framework carefully optimized
Apps and Framework Zipaligned
TK-Glitch v14 Pre 5 kernel (Live OC, Voodoo Sound, DIDLE, Init.d,...)
Latest SuperCharger (update9 rc3.2)
Latest ThunderBolt (v2.3.7)
Latest Superuser (v3.07)
Latest Busybox (v1.19.3)
Latest SQLite (v3.7.9)
Auto Zipalign @ Boot
Full SIP VoIP support (WiFi & 3G)
AOSP IML74K Browser (100%)
Swype 3.26.92.37169 (7 languages)
Updated Market (v3.4.4)
Updated Hosts file (block ads)
Updated Large APN List
Changed GPS config for Europe
Changed wifi.supplicant_scan_interval=90
No Theming (100%)
S.U.R.F.A.C.E wallpaper as default
Stripped down to The Bone (Ultra-Lite & Ultra-Fast!)
Zeam Launcher (by cloakt)
Adao File Manager
Superuser (by chainsdd)
DroidWall
Permissions (by stericson)
Rom Toolbox (by jrummy16)
Voodoo Control (by Supercurio)
DSP Manager
CM Settings
Dev Tools
NSTools
Calculator
Calendar
Camera
Email
File Manager
Gallery
HTML Viewer
Live Wallpapers (all)
Music Player
Stock Keyboard
Stock Launcher
Quick Search
Sound Recorder
User Dictionary
Visualization Wallpapers
Video Editor
Voice Dialer
...
(app/services from signed GAPPS-IML74K-121911)
Calendar
Camera
Email
Gmail
FlashPlayer
Maps
Market
Music Player
QuickPic
RealCalc
Polaris Office
Spirit FM Radio (by mikereidis)
Street View
Google Talk
Google Search
YouTube
Separate Essentials Pack provided!
AdAway
Android System Info
AppWidget Picker (/system) (by boombuler)
aTrackDog
BLN Control Free (by neldar)
Camcorder shortcut (/system)
Car Home Google (/system)
CF-Root EXT4 Tools (by chainfire)
CPU Spy (by Storm717)
Download All Files
Droidwall
GPS Aids (by ondoteam)
GPS Test
Market Enabler
Permissions (by stericson)
Record My Call
ROM Toolbox (by jrummy16)
Script Manager
SGS Kernel Flasher (by neldar)
SGS Tools (by wilsongis)
SMS Backup+
Spare Parts+
Tegrak Overclock (by Tegrak)
Terminal Emulator
Titanium Backup
TouchScreen Booster
Voltage Control (by xan)
Voodoo Control (by Supercurio)
Widgetsoid
Separate Add-on Pack provided!
Dropbox
eBay
Facebook
Flickroid
Google Docs
Google+
PayPal
Hacked Skype 2.1 v11 (by theos0o)
TuneIn Radio
Twitter
WhatsApp
xda tapatalk
Separate Add-on Pack provided!
Blue Gps icon when connected
Blue upload and download arrows
Blue main text in notification dropdowm menu
New % Battery (CM7)
Center Date in notification dropdowm menu
Shortcut for settings to the left side
ICS Trebuchet Launcher
360 Launcher
Go Launcher EX
Nemus Launcher
Regina Launcher
LauncherPro
HomeSwitcher
Separate Launcher Pack provided!


Base Updated 10/01/2012! (Multiupload)
Essentials Updated 10/01/2012! (Multiupload)
Pawitp 3.08 kernel Updated 10/01/2012! (for reverting back)
Other modems (thanks to Silky_dude, flash in CWM...)
Add-on Pack I Updated 24/12/2011
Add-on Pack II Updated 24/12/2011
Add-on Launchers Updated 28/12/2011
ICS AOSP Keyboard Updated 28/12!
ICS AOSP Gallery, VideoEditor, VoiceSearch Updated 10/01/2012!
Wallpapers
Default Swype languages: Dutch, French, German, English, Spanish, Italian, Polish
Changes in v1.3
- Based on Teamhacksungs Build 13
- updated to TK-Glitch v14 Pre 5 kernel
- updated to latest XXJVU Modem
- updated ThunderBolt!
- updated hosts file
- new DeskClock.apk
- new Music.apk
Changes in v1.2
- Based on Teamhacksungs Build 12
- upgraded to TK-Glitch v14 Pre 3 kernel
- added latest Thunderbolt scripts
- added latest SuperCharger scripts
- changed DPI to 182
- updated Swype
- added CM Settings
- added DSP Manager
- added Dev Tools
- added NSTools
- updated camera.aries.so (HD video recording, Zoom,...)
Changes in v1.1
- Based on Teamhacksungs Build 11
- Latest Pawitp linux v3.0.8 kernel (fixes GPS, Color,...)
- removed some useless stuff
- changed back to JVT modem
- changed dalvik.vm.heapsize=128m
- updated Zeam Launcher (with ICS fixes!)
- updated Essentials Add-on (Spirit FM radio, Build 11 apps, Gapps7.1,...)
Changes in v1.0:
- APN settings correctly filled (updated APN list)
- added Rom Toolbox
- added Spirit FM Radio (essentials add-on)
Changes in RC3:
- removed theming (separate CWM zip)
- calendar sync fixed (Essentials Add-on)
- face unlock fixed (Essentials Add-on)
- browser lag and white screens fixed (Essentials Add-on)
- exchange calendar sync fixed (Essentials Add-on)
- updated all Google apps and services (Essentials Add-on)
- optimized and zipaligned all Google apps and services (Essentials Add-on) 
Base ROM Download File-Size
90MB
JUST PRESS THE THANKS BUTTON OR
IF YOU LIKE, YOU CAN ALWAYS BUY ME A BEER =)
Prost, Gezondheid, Skål, Kippis, Santé, Salud, Salute, Saude
Cheers, Sláinte, Slaandjivaa, Na zdorovje, Chukbae, Gan bei, Kampai, Fisehatak
Apki Lambi Umar Ke Liye
Lettering and logo made by trikkeuh - Name chosen by woolf clubs
Credits:
THX TO DocRambone FOR INSPIRING ME!!
THX TO Sicopat FOR POINTING ME IN THE RIGHT DIRECTION!!
THX TO Tk-Glitch FOR HIS EXCELLENT GLITCH KERNEL!!
THX TO Pikachu01 FOR HIS EXCELLENT TUNDERBOLT SCRIPTS!!
All credits to Teamhacksung's and Pawitp for providing CM9 Build 12!
Please keep in mind that this is a very early Test release of ICS and still in Alpha phase
Disclamer: If you flash this customized ICS ROM you may not go to Pawitp´s thread to complain or report bugs!
In order to complain or to report bugs in the CM9 thread you need to be on Stock CM9!

Installation
download Base + Essentials and copy them to your internal sdcard
reboot into Recovery using 3-button-combo
wipe data/factory reset + wipe cache partition and dalvic cache
install Base ROM from internal sdcard using ClockworkMod Recovery
don't shut down/reboot phone right after 1st boot! Wait at least 3 minutes...
reboot into Recovery using 3-button-combo
install Essentials Add-on from internal sdcard using ClockworkMod Recovery
phone will auto-reboot into ICS S.U.R.F.A.C.E.
If you got bootloops at first try, don't panic. Pull out battery, go into recovery mode and go true the flashing sequence again
Known Issues
Camera does not support scene modes
Phone unnecessarily gets data connection on device encryption password enter screen.
Cannot format external SD
Sometimes duplicates listing of external SD files in the media database
Android OS battery usage display higher than normal.
Sometime wrong SMS selected for forwarding
Format internal instead of external SD when requested to format ext. SD
Transfer speed slows down when screen off
Speed things up a bit
enable "force GPU rendering" in settings/developer options
disable "windows animation scale" in settings/developer options
disable "transition animation scale" in settings/developer options
disable "sync" in settings/accounts & sync (better battery life)
disable "data usage" in settings data usage (better battery life)
remove Talk if you don't need it (more free memory and better battery life)
remove Maps if you don't need it (more free memory and better battery life)
remove Gmail if you don't need it (more free memory and better battery life)
Frequently Asked Questions
My calendar sync isn't working!
I'll fix this in Essentials Add-on RC2
Can I mount the phone as mass storage via USB?
The default configuration is to transfer files via MTP from within android. The below command can be used to change into USB Mass Storage mode (starting from BUILD6). USB Mass Storage mode is always used in recovery.
Code:
setprop persist.sys.usb.config mass_storage,adb
Please reboot after executing the command.
I can't adb into the phone!
The build currently uses Galaxy Nexus driver due to the MTP support. Please download the driver here: http://www.multiupload.com/BUCFT8M42N. In mass storage mode (or recovery), the Nexus S driver should be used.
Can I flash other modems?
You may flash modem packages designed for CM7.
Does 3G work? Do I need to install a script for it?
3G works out of the box without the need for any script hack. If it doesn't connect, please check if you have the correct APN.
How do I take a screenshot?
The screenshot taking function is built into ICS. Hold volume down + power.
Can I use CM7 kernels?
No, the kernel has modifications to make graphics, camera, data counter and data limit work.
Can I disable LED Notification?
Yes. Untick Settings -> Display -> Pulse notification light.
Maps keeps asking me to sign in even though I'm signed in!
Ignore the sign in dialog and pull down the notification menu. Answer the request for permission. Do this a few times and Maps will work.
How do I enter Galaxy S Settings (Device Settings)?
Type "am start com.cyanogenmod.AriesParts/.AriesParts" from adb. Or starting from BUILD 7, it is available as an icon in your launcher.
How do I enter service mode?
Type "*#*#197328640#*#*" into the dialer.
Is there a Captivate/Vibrant version?
A captivate build from the same source (but with captivate config) is available here. We currently lack a developer/maintainer for Vibrant.
Does this work for I9000B?
No, the I9000B requires a different kernel configuration. A build for I9000B may be added later in the process.
What's working? Why is there only a list of issues?
Everything else not listed are supposed to be working (aside from the usual CM7 bugs). If they're not listed, please post so that they can be added to the list of issues. A list of issues is far more useful from a development standpoint.
Why am I getting notified that my data partition is getting full when I have 1+ GB free?
Your /datadata partition, a smaller partition, is getting full.
All credits to Teamhacksung's and Pawitp for providing CM9 Build 10!
Please keep in mind that this is a very early Test release of ICS and still in Alpha phase
ICS S.U.R.F.A.C.E. is just for testing purposes only and to play around with

Disclamer: If you flash this customized ICS ROM you may not go to Pawitp´s thread to complain or report bugs!
In order to complain or to report bugs in the CM9 thread you need to be on Stock CM9!

To All,
Please keep in mind that this is a very early Test release of ICS and still in Alpha phase.
ICS S.U.R.F.A.C.E. is completely dependent on the releases made by Teamhacksung
It will be basically a stripped down version of Teamhacksung but with all the fixes, patches, mods, hints and tips,... found in Pawitp's thread already integrated. The Essentials pack will be basically the latest Gapps with some stuff removed, some apps added, fixes, optimied & zipaligned,...
ICS S.U.R.F.A.C.E. is just for testing purposes only and to play around with
It's a work in progress and together we can make this ready for everyday use, for YOU and everybody else
Perhaps this could take the load of postings on Pawitp's thread
-Sam-
Disclamer: If you flash this customized ICS ROM you may not go to Pawitp´s thread to complain or report bugs!
In order to complain or to report bugs in the CM9 thread you need to be on Stock CM9!

Wow finally the thread!
What about vodoo control? Is fully working also for color tuning?

I'll try it. thanks.

Super, Thanks for all your efforts. Flashing it as we speak.
---------- Post added at 12:55 AM ---------- Previous post was at 12:43 AM ----------
edit: apn not hooking again, don't know what causes it. will add manually now.
Missing a taskmanager also, as TB tends to act awkward on the ICS builds.

To All,
Please keep in mind that this is a very early Test release of ICS and still in Alpha phase.
ICS S.U.R.F.A.C.E. is completely dependent on the releases made by Teamhacksung
It will be basically a stripped down version of Teamhacksung but with all the fixes, patches, mods, hints and tips,... found in Pawitp's thread already integrated. The Essentials pack will be basically the latest Gapps with some stuff removed, some apps added, fixes, optimied & zipaligned,...
ICS S.U.R.F.A.C.E. v1.0 RC2 is just for testing purposes only and to play around with
It's a work in progress and together we can make this ready for everyday use, for YOU and everybody else
Perhaps this could take the load of postings on Pawitp's thread
-Sam-

Any major probs anyone? Is it ready for everyday use, good signal and battery life...?
I'm still happy with darky's 10.2, but feels a bit oldschool...
(EDIT):
SamHaLeKe said:
It's a work in progress and together we can make this ready for everyday use, for YOU and everybody else
Click to expand...
Click to collapse
Ok, i get it!

hey sam, thanks for your build!
somehow i have problems with downloading from mediafire (interrupted 5th time atm) ;/
could you upload it to some other hosting, please?
maybe its temporary, but i'm sure as hell problem isn't on my side (other things are downloading properly).
Cheers!
edit: 6th and counting -.-
8th... wtf

Thanks Teamhacksung and Sam! I need my phone in working conditions for the next few days but hopefully I'll flash it soon!
How do you guys like the ram management of ICS? Have you tried playing heavy games on it yet like shadowgun, sleepy jack, modern combat 3?

erto90 said:
Wow finally the thread!
What about vodoo control? Is fully working also for color tuning?
Click to expand...
Click to collapse
Voodoo Control is working perfectly fine, except for the color tuning.
I'm sure Pawip or another brave kernel developer will release something soon
LentoViolentoMan said:
Super, Thanks for all your efforts. Flashing it as we speak.
---------- Post added at 12:55 AM ---------- Previous post was at 12:43 AM ----------
edit: apn not hooking again, don't know what causes it. will add manually now.
Missing a taskmanager also, as TB tends to act awkward on the ICS builds.
Click to expand...
Click to collapse
It could well be that the integrated APN list is not readed correctly in ICS. I will investigate this.
Please be aware that the task manager is completely renewed in ICS.
Just long-press the home button and swype the apps you want to remove
TB is working fine for me but I'm sure updates to that app for ICS will follow soon also
Toastytwo said:
Any major probs anyone? Is it ready for everyday use, good signal and battery life...?
I'm still happy with darky's 10.2, but feels a bit oldschool...
(EDIT):
Ok, i get it!
Click to expand...
Click to collapse
No "major" probs, it's ready for everyday use as far as I'm concerned
Flash ahead, you'll be amazed... The rom runs exceptionally well for an alpha build and I've yet to run into a FC myself.

pwlj said:
hey sam, thanks for your build!
somehow i have problems with downloading from mediafire (interrupted 5th time atm) ;/
could you upload it to some other hosting, please?
maybe its temporary, but i'm sure as hell problem isn't on my side (other things are downloading properly).
Cheers!
edit: 6th and counting -.-
8th... wtf
Click to expand...
Click to collapse
Relax man, I'll upload it to multiupload or something
Cheers!
JJustin said:
Thanks Teamhacksung and Sam! I need my phone in working conditions for the next few days but hopefully I'll flash it soon!
How do you guys like the ram management of ICS? Have you tried playing heavy games on it yet like shadowgun, sleepy jack, modern combat 3?
Click to expand...
Click to collapse
If you flash this ROM your phone will be working alright JJustin Perhaps better stick to S.U.R.F.A.C.E. v8.0 (Samsung version) to be in a more stable environment?
I played, Asphalt 6 Adrenaline, Can Knockdown II, Samurai II Vengeance, Dungeon Hunter II, Nova II,... without any errors or lag, just as on Samsung ROM's

Multiupload links added @ 1st post

Just flashed the updated base (RC2) and essentials (still RC1?), and I still can't get my calendar to sync. Same problem as before on RC1. I did a factory reset and wiped cache/dalvik cache after I flashed base+essentials.
Is it working for anyone else? Also, just a minor thing, in 'about phone' it still says Surface RC1.
edit: I also cannot get my APN to work.. I filled in all the fields, although I don't understand why this would be necessary. I don't really know what to fill in the 'server' field, right now I have http://live.vodafone.com but I'm not sure if that's correct, because it's always been empty.

screenshots?

Post Deleted

nice sam! thanks!

Sam, should I use a teamhacksung's ICS build 10 as base to flash your ICS? Or maybe I cam flash straight from cm7, like teamhacksung's release?
Wysłane z mojego GT-I9000 za pomocą Tapatalk

wonsky21 said:
Sam, should I use a teamhacksung's ICS build 10 as base to flash your ICS? Or maybe I cam flash straight from cm7, like teamhacksung's release?
Wysłane z mojego GT-I9000 za pomocą Tapatalk
Click to expand...
Click to collapse
I think you should be fine if you do a factory reset/wipe (dalvik) cache and then flash ICS Surface. You can just follow the instructions from the first page..

Onraad said:
I think you should be fine if you do a factory reset/wipe (dalvik) cache and then flash ICS Surface. You can just follow the instructions from the first page..
Click to expand...
Click to collapse
Yes, I can read ;-) But my question is what rom should I flash first, because I assume it's not stock sammy rom
Wysłane z mojego GT-I9000 za pomocą Tapatalk

[ROM][ICS][4.0.4][IMM76L] CyanogenMod 9 Final Release (EOL)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After over 3 months of work, 2 hard-bricks (and a few soft-bricks) and a lot of coffee, it's time to release the first alpha version of CM9 for the Samsung Galaxy W (GT-I8150). This is very much still work in progress, but it should be decent enough now that it's usable, if you don't heavily rely on the not working stuff.
For general discussions, bug reports and FAQ, go here.
What's working:
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
Torch
Wifi and USB tethering
Screenshots
Videos
CM9 Install Guide
Note: CM for Galaxy W is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Download CM9 and gapps-ics zips and put in /sdcard
2013-07-30: CM9 Final Release [1]
MD5SUM: 11863C3A0F183E7D5A1D6BB8DA418981
Fixed issue with bluetooth not reconnecting to devices if it was on during reboot
Disabled unsupported functions on front camera
Reverted a bionic optimization that apparently causes issues on scorpion chips
Upstream security fixes
Fixed charging issue
Kernel 3.0.88
2013-05-11: CM9 rc9 [1]
MD5SUM: E43B628FA331AE0F70C29A0DD669BE5B
Fixed "pop" sound on shutdown and entering PIN (credits CastagnaIT)
Kernel 3.0.77
2013-04-15: CM9 rc8 [1]
MD5SUM: 2440D66628B350BC17AD2AB6B7CE1587
Updated CM logo in boot splash
Fixed lockscreen weather due to API changes from Yahoo
Enabled NTFS read support in kernel
Support for OTG webcam
Kernel 3.0.73
2013-03-18: CM9 rc7 [1] [2] [3]
MD5SUM: 22BA6559B0447BF6EE1AF8146FAFC6D1
New wifi driver
Support for PPPoE in kernel
Support for USB fast charging (needs 3rd party app to enable) (credits ivendor)
Support for OTG (needs external powered hub) (credits ivendor)
MMS auto-retrieval
Fixed non-working options for purging of asset bitmaps and dithering method
Fixed issues with OpenVPN and TUN
Thumbnail generation now uses HW (faster)
2013-02-19: CM9 rc6 [1]
MD5SUM: 907388CB949483D119FBD570054DCAF5
Fixed issue with no pin unlock screen after reboot
Updated BFQ scheduler
Backported I/O scheduler settings from jelly bean
Camera now uses system heap memory = a bit more free memory for kernel
Various other small rom and kernel fixes
2013-02-10: CM9 rc5 [1]
MD5SUM: DFFAD360A08390A369E22DD72EFE4B0F
Fixed snapshot issue with front camera
Fixed no sound in VoIP issue
Added and enabled ROW I/O scheduler
2013-02-04: CM9 rc4 [1]
MD5SUM: 69649976AC3A19EC674FECD21BB55CE2
Switched to 3.0 kernel (Yes camera works, front and back!)
Added Sound Recorder
Fix preview frame rate for front camera
Some RIL fixes
2013-02-01: CM9 rc3 [1]
MD5SUM: 4F0A8261721C7DD26451FB9BABDEE32A
Updated file manager
Updated terminal emulator
Fix camera preview frame rate
Some other small changes (device permissions, liblights debugging, init script)
2012-12-21: CM9 rc2 [1]
MD5SUM: 9BC21839899D874905349EA817AD97F5
Fixed loosing wifi connection during sleep
2012-12-19: CM9 rc1 [1]
MD5SUM: AC84C90A12D5715BF8B4D0EB37E8E03E
Build against optimized libv8
Enable tile rendering
Update media_profiles
Update kernel
2012-11-24: CM9 beta4 [1]
MD5SUM: 9FA0E3E4D28208D61A5E2F6CCB4E7D2C
Fixed issue with HSDPA protocol
Synced with CM
2012-10-23: CM9 beta3 [1] [2]
MD5SUM: 081583C3E9746492A09956B7D4C69561
Some updates to the camera HAL wrapper
Switched from BFQ to CFQ scheduler as default (after some testing, it seems to provide better database and 3D performance)
Some bionic tweaks (better CPU float performance)
Synced with CM
2012-10-04: CM9 beta2 [1] [2]
MD5SUM: 324EF26586EDCC9378D41B0D5450F8D4
Bluetooth sleep fix from ivendor
Reverted wifi drivers
Disabled VoIP over MVS
Updated Adreno libs
2012-09-17: CM9 beta1 [1] [2]
MD5SUM: 635447BF34B7E4D825808F8BA0F1C6D1
Fixed camera exposure issue
Fixed non working zRam
Fixed USB tethering
Fixed camera crash after taking a certain amount of pictures (credits ivendor)
Fixed issue with turning on phone when charging
Set governor to powersave and limit max frequency when charging offmode
Changed wifi country code to ALL (might help with issues in certain countries)
Increased minimum scaling frequency to 245760
Updated wifi driver
2012-08-29: CM9 alpha8 [1] [2]
MD5SUM: 7816E969ADF12463554869E4ACCFDA96
Fixed bluetooth calling (again)
Fixed notification drawer lag
Fixed issue with .nomedia file being created on sd cards (was a bug in ROM Manager)
Fixed offmode charging icon animation on ariesve (Hopefully)
Increased wifi.supplicant_scan_interval value, and moved definition to right place
Updated Adreno libs
2012-08-13: CM9 alpha7 [1] [2]
MD5SUM: 2FEA2F8398967099349D743FB86B55A5
Camera improvements and fixes (working front camera snapshots, zoom for back camera, 720p recording)
Fixed flickering led in torch app
Fixed usb mounting for external sd
2012-08-04: CM9 alpha6 [1] [2]
MD5SUM: E04AEEBCBC1DD2DD42267D836E86C224
Improved camera
Added Torch app
Various minor fixes
2012-07-17: CM9 alpha5 [1] [2]
MD5SUM: B422B7EA45DCE47C704FECD671ADB2B7
Reworked kernel
Synced with latest CM sources
2012-06-06: CM9 alpha4 [1] [2]
MD5SUM: AB169554BE0C976278AEDADA268CB824
LPA support (Low Power Audio).
Updated Adreno drivers.
Very broken and buggy camera support.
Long press menu to search.
Lockscreen weather and calendar events.
Apollo music player.
2012-05-24: CM9 alpha3 [1] [2]
MD5SUM: E2E19134AB9CAF6463B4BC419C10B388
Changed wifi driver. Hopefully it fixes most reported issues.
Enabled CIFS support in the kernel.
2012-05-12: CM9 alpha2 [1] [2]
MD5SUM: 38D44499305FB05DE82345AE2DDE8612
Fixed issue with bluetooth calling.
Fixed issue with APN's.
Improved haptic feedback.
Several kernel updates.
Sync with latest CM sources, which amongst other things includes themes and lockscreen shortcuts.
Probably some more stuff that I can't remember right now. Refer to my github for detailed changes.
2012-04-01: CM9 alpha1 [1]
MD5SUM: C564647586B394E16621283FA4A46788
Initial release
gapps UPGRADE REQUIRED
gapps version 20120429
MD5SUM: 7c524e1e078164f681e0aa6753180b2c
Please verify the md5sum to be sure you got the right one.
Before you install CM9: Preparation (First three are optional. If you want to start fresh, these can be skipped)
Install AppBak from Market, run it and save a list of all your apps.
Install SMS Backup and Restore from Market, run it and backup your SMS history.
Install Call Logs Backup and Restore from Market, run it and backup your call log history.
Boot into CWM5 recovery. Make a full backup. You will need this backup later if you decide to go back to your previous ROM and data.
WARNING: Many apps will Force Close crash if you restore data from a previous ROM.
Install
Use CWM5 or CWM6.
Warning: Only use this recovery to flash CM9. Otherwise, you risk bricking your phone!
Wipe data and cache.
Flash update*.zip.
Flash gapps*.zip. You must flash gapps after every upgrade to CM9 since /system is formatted, wiping your previous add-ons.
Reboot phone.
After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.
Warning: Do not restore backup data of system apps!
If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
It seems that restoring backups can also break Calendar sync.
Upgrades
Upgrades from previous versions of CM9 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between CM9 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.
NB: Going from a ROM using 2.6 kernel to a 3.0 kernel, a full wipe is recommended though.
Credits
CyanogenMod Team
Epic Touch CM Team for the install instructions
Private testers
ivendor and mirred for help with the camera HAL
Videos
KezraPlanes
HyperkidZero
Mirror kindly provided by THE-E.

known issues
fm radio
there's no fm radio support in cm9, period! It's not possible to add this when there's no support for it! So stop asking for it!
camera
camera will never work as good as in stock rom, period! We are using ugly hal wrapper hack to get it to work at all! This is only guaranteed to work partially ok with included camera app. And still not everything will work at all with it, like certain effects or video calls. All other 3rd party camera apps may or may not work. Don't cry if they don't. If you absolutely need a 100% working camera, use stock rom!

By "no USB tethering" you mean that CM9 is a no turning back step unless we already have a different ROM on SD card to go back to since no transfer via USB will be possible until it's fixed? Or is it related only to use the phone as a modem?

wiseless said:
Or is it related only to use the phone as a modem?
Click to expand...
Click to collapse
This.
Transferring files via usb works fine.

Arco. me' main man. you have done it...you have given us glory to have this phone...this is the best rom out there. Best ics feel. best...well...best everything! merci! merci arco! Everyone knew you could do it. i hope you like beers for your gonna get alot of them

Thanks arco...
Sent from my GT-I8150

Good job. Samsung, now this device improve 100%.

You are my hero =) Thanks, arco.

Arco, you try use spirit fm?may be work.

1million beers to arco!!!
Sent From The Phone Of Gamers

Thank you, i will return my galaxy w back
Sent from my GT-I9000 using XDA

Be aware I've noticed a potential serious bug. What happens is that apps might start crashing, and when installing an app the phone will bootloop. This might take a while to occur, and seems to be caused by the mmc cards not coming back alive after suspend. I'm currently trying to trace what patch is to blame, unless my device has developed a hardware error. So if anyone else experience the same, please report back.

arco68 said:
Be aware I've noticed a potential serious bug. What happens is that apps might start crashing, and when installing an app the phone will bootloop. This might take a while to occur, and seems to be caused by the mmc cards not coming back alive after suspend. I'm currently trying to trace what patch is to blame, unless my device has developed a hardware error. So if anyone else experience the same, please report back.
Click to expand...
Click to collapse
i already flash mine, so far no bugs...seems very smooth....i will report here if i encounter any bugs...but i notice we cant see part of the wallpaper when scroll to the left...(although isnt a serious problem ).
& a million thanks to you acro68!! Thank you for spending so much time in developing CM9 for us...cant tell how much i appreciate it!

Only bug that I see (apart from camera) is the network settings. I see no service when I do have a service. Still performs as cm9 and ICS.
Sent From Galaxy Wonders Cm-9

arco68 said:
Use CWM5.
Warning: Only use this recovery to flash CM9. Otherwise, you risk bricking your phone!
Click to expand...
Click to collapse
Hmmm...this last update to CWM MUST be used for CM9 only?
So if I decided not to use CM9 for now I'll be able to flash the backup I made prior to CM9 install and to install another ROM after the restore I'll have to ODIN-flash the previous CWM (prior to 04/01)?

infernoaswen said:
i already flash mine, so far no bugs...seems very smooth....i will report here if i encounter any bugs...but i notice we cant see part of the wallpaper when scroll to the left...(although isnt a serious problem ).
Click to expand...
Click to collapse
Noticed that too. I'll look into it. If you set the same image again from Wallpapers app, it looks correct.
gmaster1 said:
Only bug that I see (apart from camera) is the network settings. I see no service when I do have a service. Still performs as cm9 and ICS.
Click to expand...
Click to collapse
Turn off mobile data, and it should work. It just doesn't work when mobile data is on. Known issue.
wiseless said:
Hmmm...this last update to CWM MUST be used for CM9 only?
So if I decided not to use CM9 for now I'll be able to flash the backup I made prior to CM9 install and to install another ROM after the restore I'll have to ODIN-flash the previous CWM (prior to 04/01)?
Click to expand...
Click to collapse
It just means you shouldn't use another recovery program than CWM to flash CM9 with. Not really an issue I think. You can still use this one as before to restore old rom backups.

Hell yeah, this baby is smooth, fast and has Brazilian Portuguese in it (not fully translated yet it seems, but mostly)!
Thanks Arco! The only missing feature that is closer to make any difference to me is the camera, but really, I've wiped my phone quite a few times lately testing ROMs so I haven't used it.
---------- Post added at 12:48 AM ---------- Previous post was at 12:24 AM ----------
Found a bug with the native browser. Tried visiting several websites, it shows the progress bar loading but shows nothing but a white screen.
When I click the tabs icon to the right of the address bar the thumbnail shows normally, but when selected to full view, white screen again.
Not a connection problem because gmail, Play store and Dolphin browser work just fine via wifi.

Good job Arco Finally good to see an official release

Wow... very hot in here... can't wait to get my SGW from SSC .

wiseless said:
Found a bug with the native browser. Tried visiting several websites, it shows the progress bar loading but shows nothing but a white screen.
When I click the tabs icon to the right of the address bar the thumbnail shows normally, but when selected to full view, white screen again.
Click to expand...
Click to collapse
Try a reboot and see if it's better. I've had that happen to me as well. It only happened after the 4.0.4 update for me though, so might be a regression in the browser rendering code.

[ROM][Aug 25] Jellybean 4.2.2 for Endeavoru AOSP Build [Kernel 3.1.10] [JDQ39] #20

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Banner by Sebianoti
Me and rogro82 started to port Android 4.2 to the HTC One X
Working
Wireless
Phone calls
GSM Data
Audio
Video Playback (including HD)
Camera (no photosphere - blame google)
GPS
NFC
Bluetooth
BT and Wireless tethering
Not Working
USB tethering (?)
Installation instructions
BACKUP YOUR DATA (using CWM)
Verify that your backup is complete - a backup of your sdcard may also be a good idea (see below)
Verify that you are running hboot 1.26 or newer (hboot 1.39 is recommended)
Download the ZIP and the boot.img (see Downloads)
Copy the .zip to your sdcard and reboot into fastboot
fastboot flash boot boot.img, then boot into recovery
WIPE your phone (this is not optional)
Install the .zip and reboot
Upgrading
You can always upgrade to a newer version without wiping any data, formatting system or wiping the cache.
But keep in mind that you must always flash boot.img + re-flash gapps after upgrading
Changelog
RC20 (20130825)
Fixed the two Android 'master key' bugs
Kernel patch for CVE-2013-2094
RC19 (20130317)
Merged CMs audio volume patch (http://review.cyanogenmod.org/#/c/33778/)
Changed gps.conf to use pool.ntp.org (they use geodns - why isn't this the default dear google?)
RC18 (20130311)
Option to control button backlight depending on the screen brightness (Settings -> Display)
Software fix for pabx's broken headphone jack detecion: Added an option to forcefully route mediaplayer-output to the headphone jack. (Settings -> Audio)
RC17 (20130301)
Use latest WIFI Firmware (improves reception)
RC16 (20130216)
Added ro.adb.secure=1 to build.props. The phone will now only accept ADB connections from authenticated hosts. Note that you must upgrade your local ADB installation to the version included in the 4.2.2 SDK. Connecting with an pre-4.2.2 adb will not work
Fixed quicksettings: longpress = toggle, press = settings
Internal: Use CMs nicer audio-recording patch
RC15 (20130213) Android 4.2.2
Upgraded to Android 4.2.2_r1
Silenced vibrate kernel driver + removed unneeded pm_qos request
RC14 (20130208) Kernel 3.1.10
First release with Linux 3.1.10. Note that you MUST upgrade your hboot to 1.3x (1.2 versions may work - any feedback is appreciated, but any version < 1.2 will NOT work - your phone will freeze during deepsleep!)
Mounting USB-OTG devices on 4.2 is somewhat tricky as filesystems are not shared with 'parent' processes - using some userspace app like 'Nexus Photo Importer' is recommended
Switched to ondemand govenor as the old 'interactive' is broken in HTCs Linux 3.1.10 source drop (doesn't make a big difference)
RC13 (20130202)
Merged missing cam pull request
Option to change the max frequency in settings (Developer Options -> CPU Frequency)
Improved frequency management - say goodbye audio dropouts!
RC12 (20130122)
More camera options (jpeg quality, burst mode, scenes) - thanks to seadersn
Option to enable the overflow button
New hardware button mapping profile: press = tasks / longpress = menu
RC11 (20130114)
Support for encrypted /data partition. (see this post)
Ability to limit the max CPU frequency (see this post)
Enhanced included Camera App (thanks to herrvorragend23)
Include SimToolkit
Option to change the Home + Menu longpress behaviour (Settings -> Display)
RC10 (20130104)
Support for big /data partition. This is experimental, see this post
Mount /data with '-o discard'
RC9 (20121229)
Added 'volume rocker' support (disabled by default -> settings -> sound)
Bluetooth Audio (A2DP) is now working
Stubborn BT devices should now be able to pair
RC8 (20121225)
Fixed WIFI Tethering
Changed halo background
RC7 (20121220) Doomsday edition
Bluetooth Tethering support (still a little bit flaky, try to re-enable bluetooth + tethering if the connection drops)
Changed quicksettings behaviour: Short press = toggle / Long press = open settings
Reboot + Screenshot options in Power-Off menu (thanks to lownoise2)
RC6 (20121219)
Support for Bluetooth file transfer and HID (Again: thanks to rogro82)
AUDIO AND INTERNET SHARING VIA BLUETOOTH ARE CURRENTLY NOT WORKING
RC5 (20121215)
Audio recording fixed (Send your thanks to rogro82)
Developer-Options enabled by default in Settings
Display internal + sdcard storage in Settings
Improved holo-background gardient
Switching from/to 2G-Data-Only works without reboot
'Silent' GSM-Data drop is hopefully gone
RC4 (20121211)
Camera support Install this if the camera icon is missing in your app drawer
RC3 (20121209)
Paid applications can now be installed using Play Store
Unity engine based games work correctly
Hboot 1.3x support
RC2 (20121202)
Multitouch fixed
Based on Android 4.2.1 (December fixed)
HD-Videos (OMX) working
RC1 (20121126)
Include Email.apk
Fix google location service provider (google now / gmaps)
Download links (always flash boot.img!)
http://blinkenlights.ch/static/android/endeavoru_42/latest/ (Primary host in Germany)
http://android.eqmx.net/android/endeavoru_42/latest/ (Mirror in Sweden)
Gapps download
NEW http://goo.im/gapps/gapps-jb-20121212-signed.zip
IRC Channel
Join us at #tg-endeavoru on Freenode irc
FAQ
I can not upgrade my hboot to 1.3x, help!
You can still run RC13:
This was the last release using Linux 2.6 and will therefore work on older hboot versions. RC13 is stable enough for everyday-use.
What kernel should i use?
Use the stock kernel from boot.img - there is nothing wrong with it. Using a different boot.img or/and kernel will just break stuff.
Even more links!
https://github.com/adrian-bl-hox-jb/android
https://plus.google.com/115564237657785223556/posts

For people wondering:
Although its an AOSP build it does have multi-user support which originally is only available on tablets in AOSP ( users can be added in settings )

Will try it as soon as links posted, thanks for your work! Can't wait for some of the important things like camera to work.

Will have to give this one a shot. Looks very interesting, even though there's some major flaws. Official CM10 has never been stable on the HOX, so looking for alternatives. AOSP might be the solution, in the long run (not currently in that state ).
Good luck with the upcoming work, attempts, hacks, tweaks etc.!
EDIT:
1. You can add NFC to the list of working things. Just tested it with a tag.
2. The performance of the ROM seems very snappy and nice. Just because of it I had to take a few benchmark tests, and yeah, the ROM performs! https://docs.google.com/spreadsheet/ccc?key=0Api2mSgk7cfUdENKWWVqNnUyS013dnJpMGxNQXZxeEE (oops, wasn't made public at first)
Generally about Android 4.2 and its new quick settings (QS):
I wonder why Google doesn't allow us to reorder the grid (by long pressing on the items, much like on their launcher; folders). Would be great if one could add or remove buttons too. Personally I'd like to add GPS + NFC and remove 'Airplane mode'. When tapping on the items their respective activities is started. Convenient sometimes, but it makes QS pretty much useless... On/Off toggling would've been the preferred way I think. Much like how the Airplane mode button works... it doesn't even ask the user if the device should be put in airplane mode (which I think is pretty vital).

Voted to XDA News page
5 Star'd
Keep up the good work Gentleman

Definitely wanna try, but will probably wait until it's a little more stable.

Needed to rename rc0.boot_img to rc0boot.img (really any .img name would work) but otherwise booting fine straight over the top of latest CM10 nightlies. I'm no dev, but love being on the bleeding edge
M.

booting, working fine, confirmed call, data, sms, multi users... will put my mirror up tonight or tomorrow

MashineGun said:
booting, working fine, confirmed call, data, sms, multi users... will put my mirror up tonight or tomorrow
Click to expand...
Click to collapse
NOT booting for me - I think its because i am on hboot 1.31 but anyway keep ist going

Great job. Thank you guys.

anja31:
Yes this is hboot related ( i will notify pabx to put this in the first post )
To everyone:
Please feel free to post bug reports ( if not already mentioned in the first post by pabx ) and in case of a crash a logcat would be great

This is really exciting, thanks guys.
Sent from my HTC One X using Tapatalk 2

Where do we find the Email app, for non-Gmail mail? I do see the Exchange apk, but no Email apk. Should we use the one from 4.1, or does 4.2 have a new mail client app? Thanks for the awesome work too by the way; so far this is actually impressively stable for a preview (known issues aside, and more testing to be done)!

Compiled the new Email app from source... I guess you can just push it to /system/app.
I have not been able to test it yet though, so i cant say if its 100% working

rogro82 said:
Compiled the new Email app from source... I guess you can just push it to /system/app.
I have not been able to test it yet though, so i cant say if its 100% working
Click to expand...
Click to collapse
This works (for pop3 at least).
M.
Sent from my HTC One X using xda premium

thank you!! i will try it once the camera works. :good:

First off, thanks for the rom - always great to try the newest version of android!
I found a bug with google now, it doesn't show me any cards relating to my location, it says that I need to turn on googles location services but they're already on.

rob9 said:
First off, thanks for the rom - always great to try the newest version of android!
I found a bug with google now, it doesn't show me any cards relating to my location, it says that I need to turn on googles location services but they're already on.
Click to expand...
Click to collapse
This is a known issue (see first post -> location services) and is already fixed in the git version.
We will probably release a new build that includes the fix today or tomorrow.

I have the feeling that the dpi is slightly off. On the lockscreen for example the widget area is bigger than the screen and The numberpad to enter the pin is cramped together. (I have no better way to explain it. Sorry)

Awesome guys keep on going will flash this one as soon as camera is fully functional as I really need it for work !!:good::good::good::good:

discontinued [Apr. 16, 2013] [Xylon-EV v2]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

XYLON-EV is a Beta ROM and was first WIFI working 4.2.2 ROM, also my first ROM
Built from the source code of the by merging Evervolvs base , Xylon frameworks/settings and uses tytung r1 kernel for JB.
If you like my work, Kindly hit thanks meter button on the bottom left below my name.
If you want to donate, you can donate to the guys below in Credits for their hardwork.
Credits: My special thanks goes to
Evervolv Team for their legacy base to support qsd8k devices
Xylon Team for their frameworks and settings that make this rom so customizable
tytung, marc1706, Sportsstar89, Securecrt, Xylograph, ph03n!x, datagr, Rick_1995,
texasice, marco.palumbi, datagr, Robbie-P, eng.stk, zeppelinrox, zexmunze, zain0300 for all HD2 kernels, libs, mods, corrections
And all those individual/teams who I might have missed.
I customized this rom for my needs and sharing with you.
Still tons of stuff not tested so expect more bugs, crashes, reboot than the ones that I have already posted.
Must say the roms animation are very smooth. thank to 4.2.2
This is an unofficial ROM so do not post any queries or question about this rom in Evervolv's or Xylon's thread
Whats working:
• Phone
• Audio
• SMS
• Data: 3G/HSDPA
• GPS/AGPS
• USB Mass Storage
• Notification lights
• Wi-Fi
• Bluetooth (Not fully tested)
• 720p Video Playback Can be enable but break camcorder See Here
Not Working:
• HWA (I don’t know if it works or no. Don’t know how to check)
• Camera (preview is bad sometimes, but closing and restarting camera app fixs it for now)
• Camecorder (laggy bad preview)
• Panorama
• 720p Video Playback
• WiFi Tethering
• Native USB Tethering
• Cannot set APN manually, force closes ( confirmed bug reported by users )
Video of Xylon features on Nexus 4, most ( not all) feature are present.
Feature include Xylon-EV
• Flip to mute incoming ring > Phone>Settings
• Swap volume buttons when rotated to 90 or 180 degree > Display settings
• Volume Key control cursor > Language and Input
• Statusbar brightness slider > System>General UI
• Choose notification background > System>General UI
• CRT Screen off animation mode > System>General UI
• Recent RAM bar > System>General UI
• Nav Bar customization > System>Navigation Bar
• Nav Bar Transparency > System>Navigation Bar
• Hidden Navbar > System>Navigation Bar
• NavRIng customization > System> Navigation Ring
• Status Bar transparency and customization > System>Statusbar
• Quick toggles customization > System>Quick Toggle
• Pie control customization > System>Pie
• Dark Toggle> Settings
• Expanded Desktop > System>Power
PLEASE TAKE YOUR TIME TO READ THE 4th POST WHILE YOU DOWNLOAD THE ROM TO GET IT WORKING, TO GET THIS ROM WORKING SMOOTHLY
This is XylonEV download whose look, settings were moded by me
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
DOWNLOAD XYLON-EV V2
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BOTH ROM ARE ASSIGNED SEPERATE FOLDER SO THEY WONT OVERWRITE DATA IN DATA2EXT MODE or OVERWRITE SYSTEM?DATA IN NATIVESD MODE
The is the Original Xylon ROM (This is actually how official Xylon should look, lot of setting available including HYBRID mode, but some might not work. Test version only)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
DOWNLOAD TEST VERSION XYLON V1
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System partition 350MB (+ 20MB for bad blocks. Our HD2 is very old. But would strongly suggest 390MB if you are data2ext. Why? Read note1 in installation instruction on post4)[/FONT]
• 720p Video Playback Can be enable but break camcorder See Here
• For haret users NativeSD can try copying THIS file in sdcard\NativeSD folder and sdcard\NativeSD\XYLON_EV folder. Credits: Datagr
IF YOU LIKED THE ROM PLEASE HIT THANK BUTTON BELOW

Logs
- Added CM battery icons (Xylon update)
- Scrollable toggles ( Xylon update )
- Inverted Mode, Dark Xylon ( Xylon update )
- Better Version of Swap Volume ( Xylon Update )
- Gps fix ( Xylon fix )
- CM file manager (Dark theme)
- Various small fixes by Xylon
- No 720p, but I could enable it but breaks Camcorders so left it. Will fix in the next version
- Tytungs R2 kernel.
- Installer has option EngStk animations or stock animation. Thanks zexmunze. View EngSTK animations here
xxxxxxxxxxxxxxxxxxxxxxxxxxx
DOWNLOAD V1
xxxxxxxxxxxxxxxxxxxxxxxxxxx
System partition 340MB (+ 20MB for bad blocks. Our HD2 is very old. But would strongly suggest 390MB if you are data2ext. Why? Read note1 in installation instruction on post3)
1. For some who have trouble booting NativeSD can try copying THIS file in sdcard\NativeSD folder and sdcard\NativeSD\XYLON_EV folder. Credits: Datagr
2. Solution for touchscreen pinch2zoom is HERE Credits: zexmunze
3. Solution for hardware key light disable is HERE Credits: zain0300
4. Solution for call echo on the other end (microphony)is HERE Credits: zexmunze
5. Some more build.prop mods that will make ROM better try THIS Credits: zexmunze
6. Greenesh photo in lowlight with flash fix is HERE

IMPORTANT!! Please take 2 minutes to read this
• After completing installation of ROM at the end of the aroma installer, the script will ask if you want to reboot. Once you click finish it might cause an error. Don’t worry about this as the ROM has installed successfully.
• On my class 10 card, the ROM take around 5mins to boot. So if you are on slower card or nand, first boot and setting up will be painfully long. Please have patience.
• After signing in google and completing setup wizard, you might get blank screen. Wait for 10 sec and hit the hardware home button on your device. The launcher will show. If you get an “not responding” for setup wizard please click “Wait” . Do not click OK.
• Developer option is not enabled by default. Please go to Settings>About Phone and tap on Build number 10 time. Dev options will be enable. Now go to Developers option in Settings and enable “Force GPU rendering”
• By default the Governor is On Demand. For better battery life and smoothness choose SmartassV2. Don't change default CPU frequencies. Keep it 245-998Mhz as to avoid bugs caused by changing frequencies. Dont forget to tick/check "set on boot" after changing governor.
• Lock screen clock widget is slightly towards the right. You need to remove the widget and add again to get it in center (Don’t know if it’s a bug or feature but other ROMs have this too)
• On 240 dpi the lock screen widget, the date gets clipped if we enable Nav bar. So stick to default DPI is 200 and you are good to go. (200 is my preference since NexusHD2 ICS coz everthing seems so cramped on 240 and you have to scroll everytime for anything).
• If your are using Dual pane mode or tablet combined nav/status bar stick to 160 dpi or else everthing will got out of place.
IF YOU HAVE A PROBLEM AND YOU WANT TO POST IT ON THIS THREAD, PLZ GIVE US AT LEAST THIS MINIMUM DETAILS
1) Tmous1024 or EU448
2) MAGLDR or CLK
3) What recovery? CWM, 4ext etc etc
4) Installation Nand, Data2Ext, NativeSD
5) Using Swap or Odex
6) System partition.
For example you can write " TMOUS,CLK,4ext,Data2ext, No swap, no odex, Sys=340MB. I have a problem *********"
Thank you for you time
Installation instruction
There are many different bootloaders/recoveries/method to install in HD2, but If you still new to HD2 and you are starting from scratch the fastest would be this.
1) Download HD2 toolkit and install HSPL, MAGLDR. Download and instructions here
2) Download 4ext recovery from here and follow this instruction bellow:
Just a brief understanding. During installation of rom has 3 options for setup. 1. NAND(Full, Custom ) 2. DataOnExt 3. NativeSD
In brief
1. NAND. Installing everything(System and data) on phone(Nand). Further you will have option full install or custom install
2. DataOnEXT. Installing all system files on phone(NAND) and Installing all data files on sdcard(EXT4 partition)
3. NativeSD. Installing everything(System and Data) on sdcard (EXT4)
Lets start with DataOnExt
I have attached a file for 4ext recovery from "Native sd" thread which makes partitioning of sdcard with ext4 very simpler.
Installing recovery
1. Download and extract the attached file in folder example lets call this folder "D:\4ext".
2. Boot in MAGLDR (By holding power off key during start)
3. Choose "USB flasher" Connect your Hd2 to computer using usb cable.
4. Run the DAF.exe from the folder that you have downloaded/extracted example "D:\4ext" click next > next> "(it will show error "readfile missing" no problem. just continue)
This will install 4ext recovery and reboot the phone
Partitioning SD card with ext4
5. Boot into 4ext recovery from MAGLDR (by choosing ADrecovery) you will see menu from 4ext which is quite similar to CWM recovery.
6. Go to "advance" > "partition SD card" > "Remove all partition and start from scratch"
Select the size of for 1st partition (Choose greater than 1024MB) (This will be the size of data partition)
Select the size of for 2nd partition (Choose "Skip")
Select the size of for swap partition (If you using Swap choose the size of swap partition or if not "Skip") then it will start formating and ask you what format do you want to format sdext.
Choose for format "EXT4" and Let it complete formating
Installing ROM
7. Now copy my ROM zipfile into the sdcard (You can do this from the recovery itseft by choosing "toggle usb storage" in the main menu and connecting hd2 to pc using a cable. after finish copying the file safely remove device from PC and slect unmount from HD2 )
8. In recovery main menu choose "install from sdcard"
9. Choose "NAND with DataOnEXT" and then choose full Install or custom.choose whatever you wish. continue with setup. ROM will install
10. Reboot and enjoy.
Note 1 Default system partition size selected for DATAonEXT is 390M(Why 390MB? since data is mounted on sdcard, why not use whole Nand as system).
if you want to adjust, change the value in flash.cfg in the 4ext folder before proceeding step 2
Note 2 the above setup is for DATAonEXT. If you decide to install NAND minimum install change to "system ya 370M" in flash.cfg and then continue step 2, 3, 4, 7, 8. (Skip step 5, 6) Step 9 choose NAND and custom
Note 3 . If you decide to install NAND full install change to "system ya 370M" in flash.cfg and then continue step 2, 3, 4, 7, 8. (Skip step 5, 6) Step 9 Choose NAND and full
Note 4 . If you decide to install NativeSD do steps 1 to 8. step 9 choose NativeSD. Install ROM. after installation reboot to MAGLDR.
In the main menu of MAGLDR choose 10.services > 1. bootsettings > 3. AD SD dir > select folder "NativeSD" (browse using Volume keys)
Go back to main menu
choose 10.services > 1. bootsettings > 1. Boot Source > 1. Android from SD

You know I Have Xylon running on my phone on nativeSD..
But mine is mere a port.
Congratulations for your build dude..!!
Feedback coming soon

Really nice to see one more dev.
Thanks button(s) pressed.
It's a shame that I JUST installed Tytung's new JB yesterday, should have waited one more day!

Marvlesz said:
Really nice to see one more dev.
Thanks button(s) pressed.
It's a shame that I JUST installed Tytung's new JB yesterday, should have waited one more day!
Click to expand...
Click to collapse
I'm not a dev. Dont even know C++ or Java... But I do read a lot of Github, so I get some basic idea and succeeded luckily...
Dont replace Tytungs ROM.. Remember this is beta dont know what more bugs are present.... Just flash on NativeSD and try it out before you replace and regret...... Just a safe guard comment....

flashing now
will give a full review later today as i have a couple appointments to go to

up and running native sd wifi on
will test it...
Wifi working,connected send/receive data
BT working,send/receive file
Graphic is little laggy,great start main futures working

Amazing...
Bluetooth is on (will try to connect a device)
Wifi is on (will try to connect a device)
Very nice ROM so far
Awesome

Zejsters said:
Bluetooth is on (will try to connect a device)
Wifi is on (will try to connect a device)
Very nice ROM so far
Awesome
Click to expand...
Click to collapse
Waiting more comments from you. if its stable enough I'll flash it for daily use test.
And OP how you managed to fix wifi ?

I used NativeSD method (MAGLDR), but it got stuck at HTC logo screen. Waiting for 20 mins but nothing happened. Please help me, what should I do now? Thanks

I'm on clk dataonext, data works fine, wifi can see my box but I have no IP adress only macadress, cannot connect here
Qtadb is not working : exec '/system/bin/sh' failed: No such file or directory 2 2) -

i´m on magldr and native sd,
wifi=ok, data=ok, it´s very very smoothly, download from play store=ok, switched wifi on/off=ok
bluetooth=not tested
thanx very much
gps=ok (tested with gps status)

this is the rom i was waiting for, almost as smooth as GB and everything including WIFI is working. Faster than any 4.1.2 rom on my class 2 sd card. If one has better SD Card he should definitely give it a shot.

Re: [18 March 2013] [ROM] [JB] [WIFI] XYLON-EV V1
Can someone test GPS please?
Sent from my PIXELDROID HD2 using xda premium

@macs18max: I don't know what happened with initrd.gz (NativeSD). It can't work with my phone. However, I used your initrd.gz (NAND) + HypoTurtle patch -> works perfectly. Your rom is the first 4.2 rom within working wifi. Thanks for your hard work :good:
datagr said:
Can someone test GPS please?
Sent from my PIXELDROID HD2 using xda premium
Click to expand...
Click to collapse
GPS works with Google map.

datagr said:
Can someone test GPS please?
Sent from my PIXELDROID HD2 using xda premium
Click to expand...
Click to collapse
gps=ok (tested with gps status)

quantan said:
@macs18max: I don't know what happened with initrd.gz (NativeSD). It can't work with my phone. However, I used your initrd.gz (NAND) + HypoTurtle patch -> works perfectly. Your rom is the first 4.2 rom within working wifi. Thanks for your hard work :good:
GPS works with Google map.
Click to expand...
Click to collapse
Hey... Anyone else have an issue with NativeSD... I think it's my installer and the way I'm zipping it... For me I took one whole day to get the installer working right.... I tried more than 15times and finally got it working... For the same system files, and same procedure, sometimes I had superuser problem, sometimes SytemUI force closes... I'm using gzip in Ubuntu. I also tried 7zip (store mode) in windows but it failed....
Any idea's Zesjters? you r a pro in this...

macs18max said:
Hey... Anyone else have an issue with NativeSD... I think it's my installer and the way I'm zipping it... For me I took one whole day to get the installer working right.... I tried more than 15times and finally got it working... For the same system files, and same procedure, sometimes I had superuser problem, sometimes SytemUI force closes... I'm using gzip in Ubuntu. I also tried 7zip (store mode) in windows but it failed....
Any idea's Zesjters? you r a pro in this...
Click to expand...
Click to collapse
Installed your zip using 4ext recovery on MAGLDR and had no problem with NativeSD install everything is working as it is suppose to

Develop Bugs

welcome