Seidio Innodock Jr. Charging Cradle - Samsung Galaxy Nexus

Just found this Seidio Innodock Jr. charging cradle for the Galaxy Nexus and ordered it from Shopandroid.com. The thing I like about this is that I can sit it on my night stand and charge the phone while using it for an alarm clock. And hopefully I can do that without removing the silicon cover for the phone, which makes this better than a desk dock for my needs. Removing that tight fitting cover every night and putting it back every morning can be a bit of a pain.
Click here for more details.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UPDATE:
I received the cradle today, so here's a review on it... First, this is a nice looking charging stand. It's not your typical square box shape. It can be used for either charging or transfering data with your phone - just like plugging your phone into your computer with the USB cable that came with it. The picture shows a power adapter plug on the back of the unit along with the USB port. However, that little hole is NOT for a power adaptor. It probably used to be, but now it's just a hole with a little plastic plug inserted to close it off. So, if you want to use this cradle for charging your phone on a night table (which is why I bought it), then you have to also buy a 5v AC adaptor that you can plug a standard USB cable into (like this one). This cradle does come with a standard USB data/charge cable (with a full size usb plug on both ends).
Perhaps the nicest thing about this cradle is that you can fit almost any phone on it that has a center-bottom mini USB port (like the Samsung Galaxy Nexus). AND, best of all, you can leave the phone in the case. There is plenty of room to acommodate almost any tight fitting hard or soft case. The same feature, however, makes the phone a bit wobbly on the cradle. But the USB plug does fit snuggly, so there's little chance of the phone falling off. The USB port on the cradle does pivot back and forth, to allow the phone to rest against the back support regardless of the width of the phone, and whether or not you have the phone in a case.

Just making a suggestion here, but if you want a dock for your bed side, may I suggest this one? Only for the fact that it has a second battery charger in the dock as well as it is only 20 bucks
http://www.ebay.ca/itm/USB-Sync-Cra...Accessories&hash=item3cbfabe768#ht_2858wt_866

jonnyg1097 said:
Just making a suggestion here, but if you want a dock for your bed side, may I suggest this one? Only for the fact that it has a second battery charger in the dock as well as it is only 20 bucks
http://www.ebay.ca/itm/USB-Sync-Cra...Accessories&hash=item3cbfabe768#ht_2858wt_866
Click to expand...
Click to collapse
I doubt this one will allow the phone to dock with a case on it which is what the OP likes about the other one...nice looking dock though.

dgwood12 said:
I doubt this one will allow the phone to dock with a case on it which is what the OP likes about the other one...nice looking dock though.
Click to expand...
Click to collapse
Your right he did say that, I missed that part and he even underlined it. =/
I do like the look of the dock too if I do plan on getting one it be this one most likely.

Robin M said:
Just found this Seidio Innodock Jr. charging cradle for the Galaxy Nexus and ordered it from Shopandroid.com. The thing I like about this is that I can sit it on my night stand and charge the phone while using it for an alarm clock. And hopefully I can do that without removing the silicon cover for the phone, which makes this better than a desk dock for my needs. Removing that tight fitting cover every night and putting it back every morning can be a bit of a pain.
Click to expand...
Click to collapse
I was reading the review there about the charger and the person says it can only be charged via usb. Can you plug that cable into the power outlet adapter that comes with the Nexus? If so, that shouldn't be a big deal if this becomes your primary charger.
I also wonder if I would be able to leave my Incipio NGP case on while using this to charge my phone?

What that reviewer was saying is that there is no mini USB input. Looking at the back of the thing, it looks like the power source can either be a standard USB cable or the plug-in ac adaptor that comes with it. I'll be using the plug-in AC adaptor. Obviously, this cradle was made to fit a large variety of phones, not just the GN.
It also looks like it will take almost any skin-type case, but may have trouble with anything too thick. I'll let you know more when I get it in a few days.
UPDATE: That little hole is NOT a power port, so you need a 5v USB power adaptor if you want to plug this into an AC outlet. See updates to original post.

I wish there was something like this dock with the ability to charge a second battery...

clos101 said:
I wish there was something like this dock with the ability to charge a second battery...
Click to expand...
Click to collapse
This one's pretty close. Just won't charge the phone in a skin case. Also, it says it's for the i9250 model, and will not fit the Verizon i515 model.
http://www.wirelessground.com/samsung-galaxy-nexus-charging-cradle.html

I saw that one. Ideally, I want to find something that works with a case on the phone and has a slot for a second battery.
The hunt continues... I'll report back if I find one I like.

Anyone try this one? I have a GSM Nexus but I have extended battery - worried it might not fit.
http://www.amazon.com/RND-Power-Sol...9C/ref=sr_1_10?ie=UTF8&qid=1327422364&sr=8-10

mobilehavoc said:
Anyone try this one? I have a GSM Nexus but I have extended battery - worried it might not fit.
http://www.amazon.com/RND-Power-Sol...9C/ref=sr_1_10?ie=UTF8&qid=1327422364&sr=8-10
Click to expand...
Click to collapse
I was looking at that one. I have a sgp Neo hybrid case coming and would love to know if it would fit with that dock. It looks pretty nice.
Sent from my Galaxy Nexus

I should be getting that dock tomorrow so I'll let you guys know

skyhigh2004 said:
I was looking at that one. I have a sgp Neo hybrid case coming and would love to know if it would fit with that dock. It looks pretty nice.
Click to expand...
Click to collapse
Yes, any tight fighting soft or hard case should fit just fine. There is plenty of room. See the update to my original post.

mobilehavoc said:
Anyone try this one? I have a GSM Nexus but I have extended battery - worried it might not fit.
http://www.amazon.com/RND-Power-Sol...9C/ref=sr_1_10?ie=UTF8&qid=1327422364&sr=8-10
Click to expand...
Click to collapse
Just ordered it for my LTE version for delivery tomorrow, so as soon as it's in, I'll post up a review.

Juvenall said:
Just ordered it for my LTE version for delivery tomorrow, so as soon as it's in, I'll post up a review.
Click to expand...
Click to collapse
Cool. Will be looking forward to it. I need a charger for my nightstand that doesn't require me to remove my case.

mobilehavoc said:
Anyone try this one? I have a GSM Nexus but I have extended battery - worried it might not fit.
http://www.amazon.com/RND-Power-Sol...9C/ref=sr_1_10?ie=UTF8&qid=1327422364&sr=8-10
Click to expand...
Click to collapse
Dang! I wish I'd seen that one before I bought this one. I'd guess that the 2100 m Ah extended battery that VZW sells should fit. It doesn't add much thickness at all beyond the natural curve at the bottom of the phone.

mobilehavoc said:
Anyone try this one? I have a GSM Nexus but I have extended battery - worried it might not fit.
RND Power Solutions Desktop Dock Station for Samsung Galaxy Nexus
Click to expand...
Click to collapse
I also just ordered this one, should be here by Friday. The description on amazon says it has a removable insert that will help accommodate different sized cases, so I would bet if it doesn't fit initially, removing that insert should allow you to fit the extended battery in there.
Unfortunately I don't have the extended battery so I won't be able to tell you for sure. Hopefully someone else that has ordered it does have the extended batt and can give you a definite answer.

Related

Anyone ordered this dock?

Looks pretty good and has room to charge another battery while your phone is docked and charging.
http://cgi.ebay.com/USB-Battery-Dock-Charger-Cradle-HTC-Thunderbolt-4G-/300540578121?pt=PDA_Accessories&hash=item45f99d4949#ht_2490wt_952
Hm.. nice find. That is tempting. I wish it was a bit cheaper.
I'll probably pick one up anyways to use at work. Looks like it won't fit a tbolt with a case.
eleazar123 said:
Hm.. nice find. That is tempting. I wish it was a bit cheaper.
I'll probably pick one up anyways to use at work. Looks like it won't fit a tbolt with a case.
Click to expand...
Click to collapse
Yeah looks like the TB will have to be naked to fit in this dock. Please post your review as soon as you get it.
If you wait a bit, I'm certain you'll be able to find it cheaper on ebay. You should start seeing other chineese companies selling them for much less, but shipped from China (slower to get here though).
I have the Incredible dock that is similar, and hacked it up to hold the phone with a case on it (doesn't look pretty, but it DOES work).
yep i bought one from amazon...listed that its for the merge but it fits....its tight but it fits...also it has to be naked..which sucks, but the for the price its a good deal
http://www.amazon.com/gp/product/B004JX1FOY
92slammer said:
yep i bought one from amazon...listed that its for the merge but it fits....its tight but it fits...also it has to be naked..which sucks, but the for the price its a good deal
http://www.amazon.com/gp/product/B004JX1FOY
Click to expand...
Click to collapse
When you plug the TB in, does sense rotate to landscape like the car dock?
Sent from my Thunderbolt using Tapatalk
gadget! said:
When you plug the TB in, does sense rotate to landscape like the car dock?
Sent from my Thunderbolt using Tapatalk
Click to expand...
Click to collapse
Virus rom does rotates without the dock.
gadget! said:
When you plug the TB in, does sense rotate to landscape like the car dock?
Sent from my Thunderbolt using Tapatalk
Click to expand...
Click to collapse
no it doesnt .....and scratch this off your list....it stopped working this morning....the usb charger part for the phone died....returning to amazon now!
was it the adapter that died or the connected cord or plug set in the dock? would love to buy this, especially for the price.
jacobk said:
was it the adapter that died or the connected cord or plug set in the dock? would love to buy this, especially for the price.
Click to expand...
Click to collapse
not sure....it just stopped charging the phone...would charge the spare battery fine though
Thanks for the Amazon link, been looking for a dock with spare battery charger for cheap.
i was going to buy this but not now since it stopped working for you
92slammer said:
not sure....it just stopped charging the phone...would charge the spare battery fine though
Click to expand...
Click to collapse
I had that problem on my charger for the DInc, and it ended up the actual USB plug housing had split apart, and the plug was sliding back into the housing. I ended up fixing it (mine came from china, so no recourse there), and it still works fine. Just curious if that was the problem with your unit or not.
Also looks like you can get it cheaper on ebay now. As with anything from China, you take a gamble on quality... I might pick one up and see if it works with my pop case, although the USB header might be a tad too short to reach and some plastic will definitely have to be shaved off to get it to fit the back.
Anyone find a charger without the big extra battery back?
heffe2001 said:
Also looks like you can get it cheaper on ebay now.
Click to expand...
Click to collapse
I just ordered it...I will give an update when I receive it.
loztboy said:
Yeah looks like the TB will have to be naked to fit in this dock. Please post your review as soon as you get it.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes, it has to be naked in order to fit into the dock.
I have 23 of these in stock... tested one and it works great.
Any questions let me know.
I ordered one too - figured not too big of a risk for that $$ and my TB will be staying naked anyway. $25 shipped on Ebay vs $60(!) for the official one.
Edit:
Funny, as soon as I posted this, the dock arrived - FAST shipping! The dock is not bad, works fine. The only complaint I have is that the phone is held almost completely vertical, no angle at all really. So that makes it a little awkward for watching video but not too bad. Charges fine, USB works fine, insertion and removal is easy. As stated before, you cannot use a case with this dock, it is a snug fit. Slot on the back for charging a second battery.
Time will tell with the durability, but it serves my needs well - easy place to plug in and charge at my office desk. Recommended especially considering the price. If the HTC dock has HDMI (I doubt it) then maybe it will be worth $60. In the meantime this is shipping and shipping fast!
I'd buy one of these if the extended battery would fit on the dock :/
boingboingbilly said:
The only complaint I have is that the phone is held almost completely vertical, no angle at all really. So that makes it a little awkward for watching video but not too bad.
Click to expand...
Click to collapse
I ordered one as well, and your complaint is the same as mine...
The phone is almost vertical when docked.
I will not be using it.
In fact if anyone wants it, I'd sell it for 20 bucks shipped (US only).
FWIW Newegg has them for $28, but they are out of stock right now....
Dock

Desktop Docks at Mobile Fun

Just found these desktop docks at Mobile Fun:
Standard
http://www.mobilefun.com/35463-samsung-galaxy-s3-case-compatible-charging-dock.htm
Dual Charge
http://www.mobilefun.com/35464-samsung-galaxy-s3-case-compatible-dual-charging-dock.htm
Anyone use one of these? They look like they would hold the phone more securely than the Samsung dock, and they're fairly cheap as well.
One thing I'm curious about - With my old Nexus One, I used to be able to set the phone in the dock, and it would automatically switch into home mode. This mode would display the clock and weather, and then switch to a dim alarm clock at night. Anyone know if the S3 behaves the same way, or if any of the after market docks support this feature?
Update: I bought the standard version of this, in black. Here's some thoughts...
It takes a few weeks to receive one of these, since they are shipped from overseas, even if you order it from the .us version of their site.
The Galaxy S3 does not recognize this as a dock, so the phone doesn't automatically switch to desktop dock mode. This XDA thread has info on DIY hacking to address this. It's also been suggested NFC might be a good workaround for this.
The dock is fairly solid, and holds the phone securely. It's very light, but the footprint makes it pretty stable and unlikely to tip over if bumped.
It has a small pop out piece that allows docking the phone even when using a slim fitting case. I have the Rock Quicksand case, and it's a little bit loose, so something slightly thicker than that should still fit.
This is a good looking dock with a glossy black face and flat black sides, but unlike the pictures on the website, there's a white KiDiGi logo on the front of it. This logo is screenprinted on, and I'm not sure if there is any way to remove this without damaging the finish.
It has a standard micro usb connecter on the back of the dock, so any of your typical charging or syncing options should work. It also ships with a standard usb to micro usb cable, instead of the UK mains to micro usb cable as originally stated on their website. Perhaps they've changed this for the US market.
Overall, this is a pretty nice dock for the price.
It looks like it can be docked while the S3 is in a case. I wonder how thick the case can be?
I was usedto the one from captivate so I ordered 2 of these
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=310404943509
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just ordered the kidigi dual dock - I'll let you know what I think once it gets here from HK.
Apparently the maker (kidigi) has a white version.. I can't find it onsale anywhere yet.
Diznario said:
Just found these desktop docks at Mobile Fun:
Standard
http://www.mobilefun.com/35463-samsung-galaxy-s3-case-compatible-charging-dock.htm
Dual Charge
http://www.mobilefun.com/35464-samsung-galaxy-s3-case-compatible-dual-charging-dock.htm
Anyone use one of these? They look like they would hold the phone more securely than the Samsung dock, and they're fairly cheap as well.
One thing I'm curious about - With my old Nexus One, I used to be able to set the phone in the dock, and it would automatically switch into home mode. This mode would display the clock and weather, and then switch to a dim alarm clock at night. Anyone know if the S3 behaves the same way, or if any of the after market docks support this feature?
Click to expand...
Click to collapse
I really like how there's no logo on the front. I don't mind saving a few bucks by getting a non-Samsung brand, but I don't like seeing the name of some obscure brand plastered across the front of the dock (like this one)
As for the part about the home mode... I suspect you could maybe accomplish this with an NFC tag. There appears to be enough flat real estate on the dock to fit a square on there. I don't know how well it would line up with the receiving part of the phone, which I imagine is more towards the center? Definitely some testing would need to be done before sticking it on.
EDIT: I just noticed in the item description it says it comes with a "UK AC Power Adaptor." Spelling mistake aside, I'm a bit bummed by that.
Excellent point on the NFC tag. That dock in particular does seem to have the perfect spot for it.
I bet that UK power adapter goes to micro USB, which then plugs into the back of the dock. That's how my last dock was. If that's the case, then you should be able to use any other micro USB power you have handy. but yeah, that is sort of a bummer.
There is another dock like this for sale on ebay too. The ebay one has an LED on the front of it though:
http://www.ebay.com/itm/USB-Sync-2n...713864?pt=PDA_Accessories&hash=item2c6668ee88
cweemin said:
Apparently the maker (kidigi) has a white version.. I can't find it onsale anywhere yet.
Click to expand...
Click to collapse
Totally gunna wait for this version to come out. Was gunna pre order a mugen one but white would look so sweet with the white phone. Extra battery slot and charges phone.
Sent from my SPH-L710 using xda premium
I just ordered one of these:
http://www.amazon.com/gp/product/B008AFSSRE/ref=oh_details_o01_s00_i00
should be here in a few days
z0phi3l said:
I just ordered one of these:
http://www.amazon.com/gp/product/B008AFSSRE/ref=oh_details_o01_s00_i00
should be here in a few days
Click to expand...
Click to collapse
ME TOO!
I figured for $12 it was worth a try...and from a review I saw of one that looked identical but had a branding on it I felt it was a good option.
Plus from what I have read/watched it appears it may be a little nicer to play with a TPU case where I am not sure the Kidigi will work with most TPU Cases...though slim cases like the Rok case and others that more cover the back and sides but don't have the face lip appear they will work fine with the Kidigi with the insert out.
inningsdefeat500 said:
I was usedto the one from captivate so I ordered 2 of these
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=310404943509
Click to expand...
Click to collapse
I like having it sideways like this for a night stand clock. Does it go into clock mode when you dock it?
I like the sideways too, too bad the default OS doesn't go sideways on desktop view...
Just an update, I bought a spare charger from RND Power Solutions.....looks exactly the same as the Kidigi/Mugen charger posted on the first page. Unfortunately it will not charge batteries to 100 percent.....they only get to about 85% or so. This seems to be the issue with most of the aftermarket spare chargers out there right now. According to RND, this is because of the different voltage the S3 uses for overcharge protection and the manufacturer is working on a solution.
I'd stay away from these chargers till they get it fixed.
Man, I just want some good ones on Amazon with prime ;/
just FYI, mobilefun US and UK seems to be the same company, but all their US orders are believed to be sent from their UK location, this is not something that is stated on their US site. i ordered a case from their US site on july 8th and just received it today on the 18th, and the shipping address on the package is from their UK location.
Just got mine today. I've updated the original post with my thoughts.
I want to know if this would work with the Incipio Silicrylic two-piece case. Based on the OP's comments it sounds like it would but I'd rather not throw away $30 if it didn't.
I've had one of these stands, works with any type of phone. very very very very sturdy. I've had this for quite some time. Worked with my evo and my touchpro2:
http://www.thoughtout.biz/products/PED3.html
I ordered one and it said it was shipped on 7/3 and it's 7/22 and I still have not received it. I contacted their customer service and they've been slow to respond. Hopefully I'll be able to get my money back.
Sent from my SCH-I535 using xda app-developers app

qi charging question..

Just looking to get an opinion if something is due-able or not. The only thing i miss on my nexus 4 to my Htc one is wireless charging (qi charging) So i have been thinking of making a qi charging case for the htc one. This shouldnt be too hard... buy a mico usb male plug
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
solder the + and - connectors to that of the NFC charging coil card (http://www.amazon.co.uk/Wireless-Ch...1&keywords=QI+Wireless+Charging+Receiver+Coil) for example and install it into a case.
Thoughts?
chambers7867 said:
Just looking to get an opinion if something is due-able or not. The only thing i miss on my nexus 4 to my Htc one is wireless charging (qi charging) So i have been thinking of making a qi charging case for the htc one. This shouldnt be too hard... buy a mico usb male plug (/snip)
solder the + and - connectors to that of the NFC charging coil card (http://www.amazon.co.uk/Wireless-Ch...1&keywords=QI+Wireless+Charging+Receiver+Coil) for example and install it into a case.
Thoughts?
Click to expand...
Click to collapse
You may encounter trouble because of the One's all-metal body. Your case will need to completely isolate the coil from the body for this to work, if memory serves me right. Admittedly, it is aluminum, so I'm not altogether certain it will be an issue.
chambers7867 said:
Just looking to get an opinion if something is due-able or not. The only thing i miss on my nexus 4 to my Htc one is wireless charging (qi charging) So i have been thinking of making a qi charging case for the htc one. This shouldnt be too hard... buy a mico usb male plug
solder the + and - connectors to that of the NFC charging coil card (http://www.amazon.co.uk/Wireless-Ch...1&keywords=QI+Wireless+Charging+Receiver+Coil) for example and install it into a case.
Thoughts?
Click to expand...
Click to collapse
I would really like to see something like this. A couple of challenges I think would be keeping the plug area on the bottom to as thin as possible and second would be to keep the case as thin and small as possible.
I wish you luck!
MG
I know this is a bit of an old post now, but I just got one of these and its working well!
http://www.ebay.com/itm/New-Wireles...Cell_Phone_PDA_Cases&var=&hash=item257fdbe5bb
how much bigger does that case make the phone?
how much bigger does that case make the phone?
Acill said:
I know this is a bit of an old post now, but I just got one of these and its working well!
http://www.ebay.com/itm/New-Wireles...Cell_Phone_PDA_Cases&var=&hash=item257fdbe5bb
Click to expand...
Click to collapse
It is Qi compatible? What charger are you using it with? It doesn't have any mention in the ad, so I'd like to make sure.
Thanks!
Acill said:
I know this is a bit of an old post now, but I just got one of these and its working well!
http://www.ebay.com/itm/New-Wireles...Cell_Phone_PDA_Cases&var=&hash=item257fdbe5bb
Click to expand...
Click to collapse
Post pics of it on the phone and let us know what kind of charger your using. It looks like you could rip off that coil and place it in any case if it's thin .
Definitely report on results. I tried to make something like this for my One XL, and while it worked as far as charging went, it was unpredictable and seemed to make the phone unstable, though I could never figure out why. I suspect it's not just the charging current but that the phone's charging circuits and drivers need to be tuned for wireless.
Qi-compatible wireless backplate
planning to replace my housing so wanted to see if while im doing that, i could use something like this inside the case or will it not work at all due to the metal?
http://www.fasttech.com/products/0/...ductive-wireless-charging-upgrade-kit-for-sam
wireless Universal Charger receiver pad Coil with Micro USB
I just received this http://www.ebay.com/itm/261348107126
you need the Type b for the HTC One, it seems to work but as it's only 500mA at 5V the charging is
going to be fairly slow
It is very slim and unnoticeable behind a tpu case, the connected usb does not stick out that far either
(about 3mm)
As it came from China it took awhile to arrive but the price is right
bexwhitt said:
I just received this http://www.ebay.com/itm/261348107126
you need the Type b for the HTC One, it seems to work but as it's only 500mA at 5V the charging is
going to be fairly slow
It is very slim and unnoticeable behind a tpu case, the connected usb does not stick out that far either
(about 3mm)
As it came from China it took awhile to arrive but the price is right
Click to expand...
Click to collapse
Thanks for letting us know about this. I'd not seen that, but it looks like just what I'd like to try and fit between my phone and case. The lack of wireless charging was the biggest reason I held off switching from my DNA to the One. I love the convenience of just plopping my phone on the orb charger during the day. The "type b" info is a big help. Much appreciated!
kit available
Anyone tried this ....
http://www.amazon.co.uk/Aftermarket...2317&sr=1-1&keywords=wireless+charger+htc+one
http://www.ebay.co.uk/itm/Type-B-Mi...lePhonesCasesPouches&var=&hash=item3a87e872ad
iOStoAndroid said:
Anyone tried this ....
http://www.amazon.co.uk/Aftermarket...2317&sr=1-1&keywords=wireless+charger+htc+one
http://www.ebay.co.uk/itm/Type-B-Mi...lePhonesCasesPouches&var=&hash=item3a87e872ad
Click to expand...
Click to collapse
I saw them but they were more expensive than the one I picked up from ebay and still come from China
they are supposedly 750mA so should be a bit quicker to charge than the 500mA one I picked up
I just received this
http://www.ebay.de/itm/111186469984...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Works good, put it between my hardshell-case and the phone. Looks like the amazon-solution above is roughly the same
edit: Yeah, same as mentioned a few posts above... sorry for that. So, I can at least second that it fits quite well and doesn´t stick out much on the USB-Port
any idea how to use these universal receivers on my THL W8S?
my camera and my micro-usb port are in the same side, so the wire will cover my camera.
does anyone knows about an item that has longer wire so i can bend it around my camera?
this may not sound like the most logical idea, but isn't it possible to somehow use NFC for wireless charging, since NFC is about near field communication after all?
alireza_simkesh said:
this may not sound like the most logical idea, but isn't it possible to somehow use NFC for wireless charging, since NFC is about near field communication after all?
Click to expand...
Click to collapse
Nfc doesn't connect to the battery of the phone and the coil is not inductive as it is a derivative of close range rfid
A quick tip for the add on qi pads with the HTC one, as the USB is not in the middle you can't position the pad straight up or the curved back makes it hard to get a connection. Put it on a bit of a diagonal so the pad is in the centre of the back
Sent from my Nexus 7 using XDA Premium 4 mobile app
A lot of cool, useful information in this thread. Thanks everyone!

Looking for a wireless charger that is smaller than the phone

I am on a hunt for a good wireless charger that has smaller dimensions than the N5 (height & width) and is relatively thin AND is USB.
I want to mount it inside my car mount to get wireless charging whiled docked.
Thanks!
cgendreau said:
I am on a hunt for a good wireless charger that has smaller dimensions than the N5 (height & width) and is relatively thin AND is USB.
I want to mount it inside my car mount to get wireless charging whiled docked.
Thanks!
Click to expand...
Click to collapse
I am using the T200 wireless charger. It is very small and It is working flawless with my Nexus 5. Also it still power the phone after the battery is full like an directly connected USB charger.
http://www.fasttech.com/product/1462103-t200-qi-wireless-charging-plate
It is also working well with my SPIGEN slim case (have just this case)
How about some thing like this? If you get a QI charger that has a battery pack built in you would not need to have the charger plugged into your car all the time and have to see ugly wires. Plus you can also charger your friends phones at the same time if they need. How do you plan on adding the wireless charger to your car dock? Seams like a fun project, good luck. Keep us updated.
Amazon.com: LuguLake 6000mAh Qi - Enabled Inductive Wireless Charger Charging Pad
fireproofrev said:
I am using the T200 wireless charger. It is very small and It is working flawless with my Nexus 5. Also it still power the phone after the battery is full like an directly connected USB charger.
http://www.fasttech.com/product/1462103-t200-qi-wireless-charging-plate
It is also working well with my SPIGEN slim case (have just this case)
Click to expand...
Click to collapse
The LG WCP-300 is also similar to that, if you're looking for a "name brand". Of course, the LG is more expensive, and slightly thicker.
fireproofrev said:
I am using the T200 wireless charger. It is very small and It is working flawless with my Nexus 5. Also it still power the phone after the battery is full like an directly connected USB charger.
http://www.fasttech.com/product/1462103-t200-qi-wireless-charging-plate
It is also working well with my SPIGEN slim case (have just this case)
Click to expand...
Click to collapse
This looks like a pretty good option. Thanks!
grndc2gsr said:
How about some thing like this? If you get a QI charger that has a battery pack built in you would not need to have the charger plugged into your car all the time and have to see ugly wires. Plus you can also charger your friends phones at the same time if they need. How do you plan on adding the wireless charger to your car dock? Seams like a fun project, good luck. Keep us updated.
Amazon.com: LuguLake 6000mAh Qi - Enabled Inductive Wireless Charger Charging Pad
Click to expand...
Click to collapse
The LuguLake is too wide to fit. Thanks tho.
I have a Proclip adjustable mount that has some space between the back of the phone and the front of the plate. All I am planning on doing is finding something that will fit in that space, double side sticky tape it and plug my existing (hidden) usb cable in to it. Nothing too fancy. Realistically, the only thing it gives me is the ability to slide my phone into the mount and get juice without having to go through all the trouble of plugging in the usb cable (joking, it's not saving me more than 3 seconds, but gives me bonus geek points).
raichur0xx0rz said:
The LG WCP-300 is also similar to that, if you're looking for a "name brand". Of course, the LG is more expensive, and slightly thicker.
Click to expand...
Click to collapse
This also looks like a good option. May be the one I go with for the name brand sake... Thanks!
cgendreau said:
This looks like a pretty good option. Thanks!
The LuguLake is too wide to fit. Thanks tho.
I have a Proclip adjustable mount that has some space between the back of the phone and the front of the plate. All I am planning on doing is finding something that will fit in that space, double side sticky tape it and plug my existing (hidden) usb cable in to it. Nothing too fancy. Realistically, the only thing it gives me is the ability to slide my phone into the mount and get juice without having to go through all the trouble of plugging in the usb cable (joking, it's not saving me more than 3 seconds, but gives me bonus geek points).
This also looks like a good option. May be the one I go with for the name brand sake... Thanks!
Click to expand...
Click to collapse
If you want to see what the LG one looks like in person Verizon Wireless sells it. I picked one up. works great
cgendreau said:
This also looks like a good option. May be the one I go with for the name brand sake... Thanks!
Click to expand...
Click to collapse
If the specifications are accurate the T200 puts out 7.5W (5v x 1.5amp) whereas the WGP-300 puts out 5W (5v x 1amp).
I have no idea how that translates real world though. :silly:
Is Nillkin considered a brand name? They make a magic disk that is similar to the LG WCP-300. I've been trying to find reviews for it but am unable to.
fireproofrev said:
I am using the T200 wireless charger. It is very small and It is working flawless with my Nexus 5. Also it still power the phone after the battery is full like an directly connected USB charger.
http://www.fasttech.com/product/1462103-t200-qi-wireless-charging-plate
It is also working well with my SPIGEN slim case (have just this case)
Click to expand...
Click to collapse
Out of curiosity how fast does that charge your device? This looks like it's better than the LG one considering it's cheaper and will go in my car lol
cgendreau said:
I have a Proclip adjustable mount that has some space between the back of the phone and the front of the plate. All I am planning on doing is finding something that will fit in that space, double side sticky tape it and plug my existing (hidden) usb cable in to it. Nothing too fancy. Realistically, the only thing it gives me is the ability to slide my phone into the mount and get juice without having to go through all the trouble of plugging in the usb cable (joking, it's not saving me more than 3 seconds, but gives me bonus geek points).
Click to expand...
Click to collapse
Please post pics when/if you get this set up. I'm planning to get a proclip adjustable and was thinking about doing something similar
Clancy_s said:
If the specifications are accurate the T200 puts out 7.5W (5v x 1.5amp) whereas the WGP-300 puts out 5W (5v x 1amp).
I have no idea how that translates real world though. :silly:
Click to expand...
Click to collapse
These current ratings look like input not output...at least in T200 its 1.5A @ 74% efficiency which would be 1.11A, not sure about WGP-300
Sent from my Nexus 5 using XDA Premium 4 mobile app
no one suggested the nokia charger? cheap and neat, charges pretty well. smaller than the N5.
namartlu said:
no one suggested the nokia charger? cheap and neat, charges pretty well. smaller than the N5.
Click to expand...
Click to collapse
Nokia isn't usb.
Sent from my Nexus 5 using XDA Premium 4 mobile app
I'm going to try to get to a Verizon store tomorrow. Will let you all know if I get something worked out.
Sent from my Nexus 5 using Tapatalk
Just got this
http://www.amazon.co.uk/Technology-...d=1384619081&sr=8-9&keywords=wireless+charger
Well it works. It sets just perfectly for a charge. A little bit of double sided sticky tape and good to go.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 5 using Tapatalk
I've done it too!
irononreverse said:
I've done it too!
Click to expand...
Click to collapse
Is that the T200?
Dunno, it was just some generic qi puck I bought off of eBay.
http://pages.ebay.com/link/?nav=item.view&id=261284537863
anybody tried a palm pre charger? its dirt cheap on amazon. interested in it just because of the price, but not sure if itll work though.

Micro USB Qi wireless receivers?

Has anyone tried one of these qi receiver tags that plugs into your Micro USB port?
http://www.ebay.com/itm/Universal-Q...S_Cell_Phone_PDA_Chargers&hash=item27e5adb896
http://www.ebay.com/itm/Universal-Q...l_Phone_PDA_Chargers&var=&hash=item2c83141608
I know they aren't optimal, but I figured if it works it would be a good hold over until good ones come out for the G3 specific.
I will let you know when my phone gets in, I have one left over from my LG G2. I don't see why it shouldn't work though.
Charsher47 said:
I will let you know when my phone gets in, I have one left over from my LG G2. I don't see why it shouldn't work though.
Click to expand...
Click to collapse
Thanks. Any idea which one I should look at getting? Haven't seen a good enough shot of the micro USB port to make sure I get one facing the right direction. I've got Amazon Prime so I'll probably get one from there to test.
http://www.amazon.com/Universal-Wireless-Charging-Receiver-micro-USB/dp/B00H7FJX7M/
That one is on Amazon, Prime, and has 2 different models. Anyone seen a close enough photo to know which one we'd need? Port A or Port B?
I'm going to try to find one with a metal plug instead of this plastic one.
This one has tons of different options. Less than $11 on prime.
http://www.amazon.com/Universal-Wireless-Charging-micro-USB-narrow-interface/dp/B00I1D4DWO/
Sorry for the multiple posts, I thought it would collapse them.
From what I saw in pictures, it should be this one correct?
Universal QI Wireless Charging Receiver film for micro-USB of All Android Mobile (middle/narrow-interface Up)
Click to expand...
Click to collapse
If so I'll pick one up today so its here for testing when my phone arrives.
Yes I got one and didn't work.
Didn't charge at all? Can you give us some specifics?
No didn't even register on the phone. It was only $7. I ended up ripping out the Quick Circle charging coil and putting it in my phone. Works a treat!
Thanks. Do you know exactly which one you used (perhaps a link to where you purchased) so those of us that want to test other ones skip it?
RED ZMAN said:
Thanks. Do you know exactly which one you used (perhaps a link to where you purchased) so those of us that want to test other ones skip it?
Click to expand...
Click to collapse
Yes sorry can't remember where I bought it from. I think eBay? This is it...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Im using this one; http://www.amazon.com/gp/product/B00HI8JYFE/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
No problems after all. Working OK with my F400K
So now its working? Awesome! Buying 2 right now.
Mine works as well, I have this one: http://www.amazon.com/gp/product/B00IQ2GUFI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
BUT it only works if i have the receiver stuck on the back of the phone in between it and the phone case. If I have it on top of the battery the signal doesn't make it through.. perhaps because of the curved nature of the phone and the NFC receiver on the inside of the back cover.
I was always under the impression that NFC and wireless charging interfered with each other unless it was one integrated unit. That's probably why yours only works that way.
Well I got mine and tried it out, and while it does work, kind of, I'm sending them back. The cable ribbon is so thin it feels like it is going to rip, it would also need you to bend it at a bad angle to get it inside a case or inside the back. I can't get a GOOD charging connection with my TYLT VU chargers, so it is going back.
RED ZMAN said:
Well I got mine and tried it out, and while it does work, kind of, I'm sending them back. The cable ribbon is so thin it feels like it is going to rip, it would also need you to bend it at a bad angle to get it inside a case or inside the back. I can't get a GOOD charging connection with my TYLT VU chargers, so it is going back.
Click to expand...
Click to collapse
The cable ribbon is probably thin because you need to bend it at weird/sharp angles and it has to fit in the cracks of the back or case. As long as you're not constantly pulling on it, there's really no risk of tearing. Connections are fine with my $20 chargers, I can drop it on pretty much anywhere in the vicinity of the receiver and it'll charge.
Charge rate depends on which receiver you go with. Most, including the ones posted here, are 500mA which is kind of slow. I should be getting an 800mA one soon so hopefully that'll pick up the pace. IMO, these are still better than switching to PMA.
Its not so much the thin that bothers me, it is how flimsy it is. I mean it could have some reinforcement of some kind you'd think. And it leaves the pad really low on the phone, probably part of the reason it doesn't connect well even with a QI pad a good as the TYLT VU. Just removing the thing to root my device was scary, I thought the USB plug was going to tear off and stay in.
I just bought 2 battery covers with integrated Qi/NFC for $23 each on ebay (my wife got a G3 also) so that should fix the issues for me. Not sure what the VU charges at, but with my Nexus 5 it was always great, for a heavy user like me, I was satisfied (Qi dock in my car too).
What kind of qi car dock do you have? I love the wireless charging and have seen a few posts you put on XDA. I ordered that back plate from eBay, hopefully it works OK and I had ordered the sticker from China but it seems like a pain in the ass ripping off the old one.
Sent from my VS985 4G using XDA Free mobile app
Let me find a link for you. Been really happy with it. Glad my posts are helping folks!
RED ZMAN said:
Its not so much the thin that bothers me, it is how flimsy it is. I mean it could have some reinforcement of some kind you'd think. And it leaves the pad really low on the phone, probably part of the reason it doesn't connect well even with a QI pad a good as the TYLT VU. Just removing the thing to root my device was scary, I thought the USB plug was going to tear off and stay in.
I just bought 2 battery covers with integrated Qi/NFC for $23 each on ebay (my wife got a G3 also) so that should fix the issues for me. Not sure what the VU charges at, but with my Nexus 5 it was always great, for a heavy user like me, I was satisfied (Qi dock in my car too).
Click to expand...
Click to collapse
Do you have a link to the ones you bought? Also could you post some pictures when you receive and install them?

Categories

Resources