[Q] Pre-rooted Stock Gingerbread (3.14.405.1) fails - Desire Q&A, Help & Troubleshooting

Hi all,
the installations of the Pre-rooted Stock Gingerbread (3.14.405.1) ROM fails with the following error:
Code:
ClockworkMod Recovery v2.5.0.7
-- Installing: SDCARD:3.14.405.1-signed.zip
Finding update package...
Opening update package...
Installing update...
Formatting SYSTEM:...
Formatting DATA:...
Copying files...
Writing BOOT:...
E:Error finishing BOOT:
E:Failure at line 86:
write_raw_image PACKAGE:boot.img BOOT:
Installation aborted.
Could anybody please bring any light on this?
I updated the radio image with the latest version from the thread before.
Thanks in advance
GBIC

do you have a pvt4 desire?

It seems to be stalling at boot.img. have you got Alpharev stock hboot. It needs this has its a stock rom.

kotag82 said:
do you have a pvt4 desire?
Click to expand...
Click to collapse
bored_stupid said:
have you got Alpharev stock hboot. It needs this has its a stock rom.
Click to expand...
Click to collapse
Thanks for your replies.
I'm sorry, but I can't answer your questions because I don't know by heart.
How can I find that out?
I just know that I have HBOOT 0.80.

just post info from your fastboot...
have you done full wipe before installation?

kotag82 said:
just post info from your fastboot...
Click to expand...
Click to collapse
Sure!
Code:
BRAVO PVT1 SHIP S-ON
HBOOT-0.80.0000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
Mar 29 2010,21:34:33
kotag82 said:
have you done full wipe before installation?
Click to expand...
Click to collapse
Yes, done that from recovery and also performed all "format" options from the "mounts and storage" menu.
Btw:
The [BETA 0.3.5][20.01] ICS for Desire [with Camera+video][4.0.3] ROM runs excellent.

Update!
Now I'm on:
Code:
BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
Aug 10 2010,17:52:18

try to switch to different recovery

Thanks for your help, but I think I'll stick with ICS for Desire.
That ROM really works excellent.

Is the camera working properly on ICS for Desire?

Check ICS thread.
Sent from dGB using Transparent XDA App

Related

[Q's,A's,Solutions] HELP THREAD n00b friendly

I had this idea for a long time now. Questions and answers are scattered all over XDA now, so it can be difficult to find correct information even using search, as there are too many irrelevant search results.
So here is my idea. N00b friendly thread, where n00bs can ask ANYTHING. I hope that more experienced users will join me. If you have an answer and feel like helping poor n00b, just join in. If you want to abuse a n00b, well, i suppose you could create a thread called "abuse a noob" and do as you like there.
Ask ANY questions which are related to HTC Desire here guys. Battery, flashing, rooting etc. and we will try to direct you to place where you can find info or give you an answer if we know it. Do that instead of creating useless thread with just one question in it. Please, include as much detail as you can when asking something.
This is opportunity for peeps to ask questions without being sworn at, and for the helpers to earn their THANKS.
reserved in case thread successful and some faq is built.
I've just started a thread about having problems with flashing InsertCoin_GB_Sense2.1_CM7_1.0.3 ROM
My Desire is:
AlphaRev CM7
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.1000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02_2
My SD card is partitioned EXT4 (1GB)
I updated the Hboot to "PB99IMG_bravo_cm7" (PB99IMG.ZIP) found on alpharev.nl
After I wiped all data and cache, flashed the ROM...now I'm stuck at the "Why So Serious?" screen.
Thanks for opening this thread for noobs.
Meddroid said:
I've just started a thread about having problems with flashing InsertCoin_GB_Sense2.1_CM7_1.0.3 ROM
My Desire is:
AlphaRev CM7
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.1000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02_2
My SD card is partitioned EXT4 (1GB)
I updated the Hboot to "PB99IMG_bravo_cm7" (PB99IMG.ZIP) found on alpharev.nl
After I wiped all data and cache, flashed the ROM...now I'm stuck at the "Why So Serious?" screen.
Thanks for opening this thread for noobs.
Click to expand...
Click to collapse
Have you tried flashing it again? What are your attempted fixes so far?
I flashed it for the second time now and I still have the same problem.
What do you mean by the attempted fixes?
Have you tried different recovery?
Sent from my HTC Desire using XDA App
No. Can you give me the link to the best one?
Try 3.0.0.5. It worked for me - link in sig.
It's the same one I have.
I'm using amonra 2.0.0, and it's yet to give me any problems. I must admint i haven't tried flashing latest IC.
Now even when I try to restore the backup, it doesn't work...it still gets stuck in the "why so serious screen?"
I had a normal non custom htc sense before. Help please!
Here is a link to the ROM I used to have.
http://forum.xda-developers.com/showthread.php?t=741775
Why is the restore not working is it because of the AlphaRev CM7?
Yes.
Meddroid said:
Here is a link to the ROM I used to have.
http://forum.xda-developers.com/showthread.php?t=741775
Why is the restore not working is it because of the AlphaRev CM7?
Click to expand...
Click to collapse
Sent from my HTC Desire using XDA App
tinky1 said:
Yes.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Can you please tell me which one of the following images should make me restore my old rom?
Bravo Stock 1.8 bravo_alphaspl.img
Bravo N1Table bravo_alphaspl-n1table.img
Bravo Data++ bravo_alphaspl-data.img
Bravo Sense bravo_alphaspl-sense.img
Bravo Oxygen bravo_alphaspl-oxygen.img
Bravo stock mate
Meddroid said:
Can you please tell me which one of the following images should make me restore my old rom?
Bravo Stock 1.8 bravo_alphaspl.img
Bravo N1Table bravo_alphaspl-n1table.img
Bravo Data++ bravo_alphaspl-data.img
Bravo Sense bravo_alphaspl-sense.img
Bravo Oxygen bravo_alphaspl-oxygen.img
Click to expand...
Click to collapse
Sent from my HTC Desire using XDA App
First of all some background info
BRAVO PVT3 SHIP S-ON
MICROP -051 d
Touch Panel-SYNT0101
RADIO-5.14.05.17
Jun 10 2010,12:12:05
ok i have few queries
1--If I want to install a gingrbrd rom say leedroid's 3.0..do I need to upgrade my Hbot? If yes, how to it in a safe manner?
2--Is it really necessary to S-OFF?I just install some themes,new roms n games..wats advantage of it for me?
3--Also how to root desire as per latest softwares?Ofcourse my phone is rooted a long time back by me n i don remember what exactly i did? i remember using Unrevoked.I lost all software now..Links plz coz i want to root my frnd's desire with hboot 0.93.001 n amoled display..
thanks a lot for answering dis silly queries and spending your precious tym
Sent from my HTC Desire using Tapatalk
1. You most likely are going to need 0.93 hboot, best way to do it to s-off and flash latest hboot. 2. Advantage is that you can flash different hboot and try data++/cm7 roms. Also this allows safer radio flash. S-on doesn't allow you to edit system folder when Rom is running, s-off does.
3. Look in rooting guide stickie, not much changed, you still need to use unrevoked.
lordvoldemort said:
First of all some background info
BRAVO PVT3 SHIP S-ON
MICROP -051 d
Touch Panel-SYNT0101
RADIO-5.14.05.17
Jun 10 2010,12:12:05
ok i have few queries
1--If I want to install a gingrbrd rom say leedroid's 3.0..do I need to upgrade my Hbot? If yes, how to it in a safe manner?
2--Is it really necessary to S-OFF?I just install some themes,new roms n games..wats advantage of it for me?
3--Also how to root desire as per latest softwares?Ofcourse my phone is rooted a long time back by me n i don remember what exactly i did? i remember using Unrevoked.I lost all software now..Links plz coz i want to root my frnd's desire with hboot 0.93.001 n amoled display..
thanks a lot for answering dis silly queries and spending your precious tym
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Sent from my HTC Desire using XDA App
Meddroid said:
I've just started a thread about having problems with flashing InsertCoin_GB_Sense2.1_CM7_1.0.3 ROM
My Desire is:
AlphaRev CM7
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.1000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02_2
My SD card is partitioned EXT4 (1GB)
I updated the Hboot to "PB99IMG_bravo_cm7" (PB99IMG.ZIP) found on alpharev.nl
After I wiped all data and cache, flashed the ROM...now I'm stuck at the "Why So Serious?" screen.
Thanks for opening this thread for noobs.
Click to expand...
Click to collapse
Is the Insertcoin rom the right size for the cm7 hboot you are using?
If its too big you won't be able to boot it without changing the partition table.
stringer7 said:
Is the Insertcoin rom the right size for the cm7 hboot you are using?
If its too big you won't be able to boot it without changing the partition table.
Click to expand...
Click to collapse
Judging by the info he's given everything is ok.
Problem solved. I couldn't flash the ROM because I partitioned the SDcard with EXT4 directly from the computer, not via phone.
The ROM is working like a charm now. Thanks to you all for the help.
What's left now is which radio to Flash? and why? What are the advantages?
Reminder:
My Desire is:
AlphaRev CM7
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.1000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02_2
My SD card is partitioned EXT4 (1GB)

[Q] Phone stuck on HTC start-up logo

I have problems with my HTC desire.
1) My Desire is stuck on HTC start-up logo
2) Boot screen LOCK / UNLOCK info is missing from HBOOT MENU.
3) INFO (ERR) Command error !!! on "fastboot oem get_identifier_token"
4) REMOTE: SIGNATURE VERIFY FAIL on flashing CWM
INFO: There is no Recovery mode install in my HTC desire.
I don't know what's happen with my phone,:crying: I am giving all info about my HTC kindly help me to solve it.
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-fail
RADIO-5.09.05.05.30_2
Aug 10 2010, 17:52:18
Download the ruu and flash it. Check out the sticky Bortak's guide.
Sent from my HTC Desire using Tapatalk 2
@dvsk69
dvsk69 said:
download the ruu and flash it. Check out the sticky bortak's guide.
Sent from my htc desire using tapatalk 2
Click to expand...
Click to collapse
could you plz explain how can i get the ruu or give me any link for it
Problem is still alive after flash RUU
dvsk69 said:
Download the ruu and flash it. Check out the sticky Bortak's guide.
Sent from my HTC Desire using Tapatalk 2
Click to expand...
Click to collapse
I have download the ruu and flash it and my HBOOT get updated to
BRAVO PVT4 SHIP S-ON
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-fail
RADIO-5.17.05.23
Jul 22 2011, 16:19:16
But my problem is still alive
so what to do now. plz help.
dearatanu said:
I have download the ruu and flash it and my HBOOT get updated to
BRAVO PVT4 SHIP S-ON
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-fail
RADIO-5.17.05.23
Jul 22 2011, 16:19:16
But my problem is still alive
so what to do now. plz help.
Click to expand...
Click to collapse
Which RUU you used? Use this one http://d-h.st/d44
dvsk69 said:
Which RUU you used? Use this one http://d-h.st/d44
Click to expand...
Click to collapse
I have already download the stock ruu and flash it and my HBOOT get updated to
BRAVO PVT4 SHIP S-ON
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-fail
RADIO-5.17.05.23
Jul 22 2011, 16:19:16
But my problem is still alive
so what to do now. plz help.
dearatanu said:
I have already download the stock ruu and flash it and my HBOOT get updated to
BRAVO PVT4 SHIP S-ON
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-fail
RADIO-5.17.05.23
Jul 22 2011, 16:19:16
But my problem is still alive
so what to do now. plz help.
Click to expand...
Click to collapse
i would fix the highlighted problem

[Q] Installing Custom over an other Custom keeps resetting to pincode screen

Hi,
I have a problem. I Installed CyanoMod a month ago (but it so slow and shutting down at random times) so I wanted to install a ligther rom (MildWild MW-9.5 Based on Redux2 TEST). But now he keeps just restarting over and over to the pincode screen
I did a full wipe (factory reset) with 4EXT (although I rooted my phone with Evolutionary)
Any ideas/fixes?
my old topic from last month if u want to know more:
EDIT: I doesn't reset in airplane mode.
http://forum.xda-developers.com/showthread.php?p=43360803#post43360803
Have you tried any other roms?
Also from your other thread it looks like your radio is out of date. Just to confirm can you go into the bootloader and post which radio you have.
I haven't tried to reinstall yet? should I do a full wipe and try again maybe?
Code:
-Revolutionary-
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.1002
MICROP-031d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
Aug 10 2010, 17:52:18
8bitboy said:
I haven't tried to reinstall yet? should I do a full wipe and try again maybe?
Code:
-Revolutionary-
BRAVO PVT1 SHIP S-OFF
HBOOT-0.93.1002
MICROP-031d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
Aug 10 2010, 17:52:18
Click to expand...
Click to collapse
First update your radio. You can download the latest one from here.
After flashing that, do a full wipe and reflash the mildwild rom.
appa oomaimo
Should I install the latest version?
8bitboy said:
Should I install the latest version?
Click to expand...
Click to collapse
Yes
all fisctl
I can't update the radio :/
It says: Amend scripting is no longer valid and something about edify scripting. Also I used the 2nd method but where can I find the modaco r5 root pack to use the 1ste method.
8bitboy said:
I can't update the radio :/
It says: Amend scripting is no longer valid and something about edify scripting. Also I used the 2nd method but where can I find the modaco r5 root pack to use the 1ste method.
Click to expand...
Click to collapse
Use fastboot to flash it then. Setup adb/fastboot, unzip the latest radio zip and then use "fastboot flash radio radio.img" while the phone is in fastboot mode.
Chromium_ said:
Use fastboot to flash it then. Setup adb/fastboot, unzip the latest radio zip and then use "fastboot flash radio radio.img" while the phone is in fastboot mode.
Click to expand...
Click to collapse
Thanks, I kinda thought I would needed to use fastboot when I searched. Thanks for the help!!

[Q] How to downgrade hboot to go back to stock for Desire Bravo?

I want to go back to the stock version of Desire, The way it comes from factory, I tried according to many posts to flash a RUU but it cant as it shows S-Off even after flashing RUU. Some people says I have to downgrade hboot before flashing RUU, I am also not sure about which RUU I should flash. Please guide me how to do that , what hboot i need and how to come to stock hbook and please tell me the correct RUU to flash according my phone specs.
My phone Specs are:
Currently on Cyanogen Mod Version 10.1 (JB 4.2.2)
4EXT Recovery.
Unbranded GSM HTC Desire Bravo (Not bound to any network provider)
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010
Mastermindsaifee said:
I want to go back to the stock version of Desire, The way it comes from factory, I tried according to many posts to flash a RUU but it cant as it shows S-Off even after flashing RUU. Some people says I have to downgrade hboot before flashing RUU, I am also not sure about which RUU I should flash. Please guide me how to do that , what hboot i need and how to come to stock hbook and please tell me the correct RUU to flash according my phone specs.
My phone Specs are:
Currently on Cyanogen Mod Version 10.1 (JB 4.2.2)
4EXT Recovery.
Unbranded GSM HTC Desire Bravo (Not bound to any network provider)
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010
Click to expand...
Click to collapse
Just flash the Alpharev downgrade.img then run a ruu for ur device, or if u dont wana search for the correct ruu then just use the 2.3 gb upgrade ruu, it can be found in bortaks troubleshooting guide, or at shipped roms.
Going to do as directed
jmcclue said:
Just flash the Alpharev downgrade.img then run a ruu for ur device, or if u dont wana search for the correct ruu then just use the 2.3 gb upgrade ruu, it can be found in bortaks troubleshooting guide, or at shipped roms.
Click to expand...
Click to collapse
Could You please provide me the links for Alpharev downgrade.img and 2.3gb upgrade
many thanks in advance
jmcclue said:
Just flash the Alpharev downgrade.img then run a ruu for ur device, or if u dont wana search for the correct ruu then just use the 2.3 gb upgrade ruu, it can be found in bortaks troubleshooting guide, or at shipped roms.
Click to expand...
Click to collapse
I found that file on Alpharev site , i know how to flash PB99IMG file, put it on SD Card and it automatically run it when we on the phone with vol down and power button, going with that
alpharev.nl/PB99IMG_downgrade.zip
Mastermindsaifee said:
I found that file on Alpharev site , i know how to flash PB99IMG file, put it on SD Card and it automatically run it when we on the phone with vol down and power button, going with that
alpharev.nl/PB99IMG_downgrade.zip
Click to expand...
Click to collapse
u have to rename that file to just PB99IMG.zip for it to work, as for a ruu, google shipped roms the look in bravo section and find the ruu for ur phone, i.e country/region etc etc
I did all as u said but m still on S-OFF
jmcclue said:
u have to rename that file to just PB99IMG.zip for it to work, as for a ruu, google shipped roms the look in bravo section and find the ruu for ur phone, i.e country/region etc etc
Click to expand...
Click to collapse
I did all as u said but m still on S-OFF
I flashed Alpharev downgrade by Android Flasher and then run the RUU (2.3 gb update) from http://forum.xda-developers.com/showthread.php?t=1196172
when i go to bootloader it still shows the option to go into recovery and etc , but when i clicked on recovery there is a black screen with a mobile and a /!\ symbol at the center of screen , then i have to pull the battery off and restart the phone.
Thats the before and after Alpharev and RUU (I underlined the changes)
Before
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010
After
BRAVO PVT4 SHIP S-OFF
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Jul 22 2011
Mastermindsaifee said:
I did all as u said but m still on S-OFF
I flashed Alpharev downgrade by Android Flasher and then run the RUU (2.3 gb update) from http://forum.xda-developers.com/showthread.php?t=1196172
when i go to bootloader it still shows the option to go into recovery and etc , but when i clicked on recovery there is a black screen with a mobile and a /!\ symbol at the center of screen , then i have to pull the battery off and restart the phone.
Thats the before and after Alpharev and RUU (I underlined the changes)
Before
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010
After
BRAVO PVT4 SHIP S-OFF
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Jul 22 2011
Click to expand...
Click to collapse
Dunno so, usually when u flash bravo_downgrade.img then ruu it should be s-on again. Why does it matter that its s-off? it doesnt affect the phone in any way now that ur back on stock rom.
did you try the ruu from here?
http://forum.xda-developers.com/showthread.php?t=695667
Are you trying to go back for warranty or sth??
RoyW said:
did you try the ruu from here?
http://forum.xda-developers.com/showthread.php?t=695667
Are you trying to go back for warranty or sth??
Click to expand...
Click to collapse
jmcclue said:
Dunno so, usually when u flash bravo_downgrade.img then ruu it should be s-on again. Why does it matter that its s-off? it doesnt affect the phone in any way now that ur back on stock rom.
Click to expand...
Click to collapse
nops thats not for warranty purposes, My camera was working fine before rooting, But after root camera is not working on any of the avilable roms for HTC, I tried almost all roms. I sent the phone to be checked for the camera for hardware issues and they said its ok, So I decided to return to stock on which camera is working fine.
Mastermindsaifee said:
nops thats not for warranty purposes, My camera was working fine before rooting, But after root camera is not working on any of the avilable roms for HTC, I tried almost all roms. I sent the phone to be checked for the camera for hardware issues and they said its ok, So I decided to return to stock on which camera is working fine.
Click to expand...
Click to collapse
Did camera works for sure after that ? what you thinks ?
Mastermindsaifee said:
Did camera works for sure after that ? what you thinks ?
Click to expand...
Click to collapse
I tried telling you before, it's likely hardware.
You're already on stock ROM, even if you get it to S-ON I don't believe it will make a difference to the camera.
If you really need to get to S-ON, try flashing the downgrader manually using fastboot commands instead of android flasher. Set it up here You will know it works as it will say "Alpharev Unlock" at the top of the bootloader screen.
Then try the 2.3.3 RUU again.
If the camera still doesn't work, S-ON and stock ROM, then it's hardware related.
eddiehk6 said:
I tried telling you before, it's likely hardware.
You're already on stock ROM, even if you get it to S-ON I don't believe it will make a difference to the camera.
If you really need to get to S-ON, try flashing the downgrader manually using fastboot commands instead of android flasher. Set it up here You will know it works as it will say "Alpharev Unlock" at the top of the bootloader screen.
Then try the 2.3.3 RUU again.
If the camera still doesn't work, S-ON and stock ROM, then it's hardware related.
Click to expand...
Click to collapse
Must try it tonight for sure , Thanks
eddiehk6 said:
I tried telling you before, it's likely hardware.
You're already on stock ROM, even if you get it to S-ON I don't believe it will make a difference to the camera.
If you really need to get to S-ON, try flashing the downgrader manually using fastboot commands instead of android flasher. Set it up here You will know it works as it will say "Alpharev Unlock" at the top of the bootloader screen.
Then try the 2.3.3 RUU again.
If the camera still doesn't work, S-ON and stock ROM, then it's hardware related.
Click to expand...
Click to collapse
Got an Error message
Mastermindsaifee said:
Got an Error message
Click to expand...
Click to collapse
It says Not Allowed, which to me sounds like your no longer s-off. Are you?
Try using the PB99IMG.zip method and see if that works.
Chromium_ said:
It says Not Allowed, which to me sounds like your no longer s-off. Are you?
Try using the PB99IMG.zip method and see if that works.
Click to expand...
Click to collapse
I think so as the phone shows :
Before
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010
Now
BRAVO PVT4 SHIP S-OFF
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Jul 22 2011
Mastermindsaifee said:
I think so as the phone shows :
Before
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010
Now
BRAVO PVT4 SHIP S-OFF
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Jul 22 2011
Click to expand...
Click to collapse
Weird. Try the PB99IMG.zip.
Chromium_ said:
It says Not Allowed, which to me sounds like your no longer s-off. Are you?
Try using the PB99IMG.zip method and see if that works.
Click to expand...
Click to collapse
In PB99IMG.zip method , I have to rename ""bravo_downgrade.img"" in to PB99IMG.zip and put it on sd card root, and then open phone in boot HBOOT ? After that again run 2.3 RUU ?
Mastermindsaifee said:
In PB99IMG.zip method , I have to rename ""bravo_downgrade.img"" in to PB99IMG.zip and put it on sd card root, and then open phone in boot HBOOT ? After that again run 2.3 RUU ?
Click to expand...
Click to collapse
No, you DONT just rename an .img file to a .zip file. Download the PB99IMG_downgrade.zip from alpharev. Then rename that file to PB99IMG.zip. After that put it on the root of the sdcard, and boot into hboot. Wait a few seconds and it should ask you if you want to install. If it installs successfully run the 2.3 RUU.
Chromium_ said:
No, you DONT just rename an .img file to a .zip file. Download the PB99IMG_downgrade.zip from alpharev. Then rename that file to PB99IMG.zip. After that put it on the root of the sdcard, and boot into hboot. Wait a few seconds and it should ask you if you want to install. If it installs successfully run the 2.3 RUU.
Click to expand...
Click to collapse
Trying

[Q] Back to Stock ROM and others

Hello, i want back EVERYTHING in my phone to stock. I mean:
HBOOT
RADIO
ROM
My current phone state:
Revolutionary
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP-0622
TOUCH PANEL-ATMEL224_16ab
RADIO-3.35.20.10
NOV 17 2010, 12:08:53
ClockworkMod Recovery v5.0.2.0
Please help. I dont even know what do first and how .
imdyingdude said:
Hello, i want back EVERYTHING in my phone to stock. I mean:
HBOOT
RADIO
ROM
My current phone state:
Revolutionary
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP-0622
TOUCH PANEL-ATMEL224_16ab
RADIO-3.35.20.10
NOV 17 2010, 12:08:53
ClockworkMod Recovery v5.0.2.0
Please help. I dont even know what do first and how .
Click to expand...
Click to collapse
Google for the website shipped-roms.com and then enter its android section, then buzz. Download a RUU that's either local to you or speaks your language.
Run it. The phone should flash the stock ROM, and radio. Only thing left is the hboot.
In order to stop htc overwriting our hacked hboots the alpha rev team set a higher hboot number. So you need to google for the fast boot command to return the htc wildfire hboot to s-on.
Then your good to go.
Sent from my Desire S using Tapatalk
worked for me
i did worked for me
f4ll3n said:
i did worked for me
Click to expand...
Click to collapse
Happy to help
Sent from my Desire S using Tapatalk

Categories

Resources