Develop Bugs

BIG problem!! please help (no sd-card, no usb-connection AFTER recovery image update)

hey guys,
once every serveal months i check for updates for my rom, my recovery, and some apps.
yesterday i wanted to update tp the latest recovery (1.52)
now, the phone connected, driver was installed correctly (windows 7 32-bit)
i used the adb commands as posted in the recovery topic.
now it updated it, but after a few minutes using and wiping the phone, the usb-connection will not come to live (in any way, not even a "unknown device") and when the phone booted it gave a message: "SD removed, please place sd-card." while it has a 8 gb on there. luckily i backed up all data i needed from the sd before i flashed. so i used recovery to recreate partitions and wipe sd. but nothing works anymore... when i select ANY option in recovery wich needs SD access it immediatly gives errors.
also tried a nother microsd of 1 gb which did also not work...
about the usb-connection, it also does not work in Recovery.
but in the bootloader, it installs without any problems the well known "My HTC" device. using fastboot to boot to recovery image works, but again: no usb connection
please guys... help me... without sd-card i find my phone completely useless. (because of many documents and pictures for my work.)

I've had this problem and I had to send my Hero for repair, but it could be difficult if you have custom software in there, thry to flash original rom. Not sure though if it can be done through fast boot.
Also if you have to send it back, pretend to be an idiot and say it just went wrong. "I didn't do anything" could work.

Use fastboot to revert to a stock ROM (update.zip)

This sounds very similar to this issue on Modaco - http://android.modaco.com/content-page/299174/no-adb-no-sd/
Still ongoing, as I (pulser) am trying to guide the OP through making the goldcard (need to find another android phone to do this) and then we need to try an RUU somehow???

adwinp said:
Use fastboot to revert to a stock ROM (update.zip)
Click to expand...
Click to collapse
ok, and how?
thanks for reply.
i was thinking of letting it be repaired, but as you all say, unlocked spl, recovery image, custom rom. it does not look so good when they disver that.
but i am a stupid guy, so pretending to be stupid should be easy for me

If you are just interested in getting it back to stock for returning under guarantee to HTC, here is what I would suggest.
(No guarantees, as I haven't had to try this, and won't, for obvious reasons)
Get the stock RUU file from the hero that you have. I would recommend the oldest one that is available for you. (eg. a 1.73 one).
DISCONNECT your phone, and run the exe file(Yes, sounds strange, but bear with me).
Wait till the splash screen for the RUU is up, asking you to accept the EULA etc.
Now browse in my computer to your temp directory (C:\Users\Username\AppData\Temp in Vista/7, C:\Documents And Settings\Username\Application Data\temp in XP)
Sort the folders/files by date modified, and the most recently modified (or one of the most recently modified) folder should contain the RUU stuff. Inside a subfolder is a file called rom.zip. Copy this file to the desktop or another safe place. Once file is copied, close the RUU.
Now get your phone plugged in and booted into fastboot. (hold back + power)
Then use the command
Code:
fastboot flashall C:\Users\Username\Desktop\rom.zip
No guarantees, but it should get you back to the stock recovery, system and boot (NOT HBOOT or SPL, the actual boot.img that android uses to boot the kernel)

can i also flash custom rom with fastboot? to test if something is wrong with the rom?

That would depend on what version of SPL/HBOOT you have. If it is security off, then maybe. Otherwise I doubt it. You usually need an original, HTC signed file to flash using that method.
Feel free to give it a go, but I don't think it would work.

[Q] Sorry, Ive read and read.....

Hi Guys,
This is my first post and its only in desperation.
I have a HTC Desire. I upgraded to 2.3.3. After reading how unrevoked doesn't work on this, I created a Goldcard and managed (all on my own) to turn the phone to s /off.
Now Im stuck, many threads explain the process in different ways (as most of them related to pre 2.3.3). So do I load a custom rom onto the Goldcard and flash from there? Also, do I need to install a rollback program first or after?
Really sorry for starting a new thread, but you will see by my profile, Ive been at this for two days .
[Takes cover for flaming session]

im no expert, indeed i have only rooted only a few days ago. I was lucky to have a unlocked phone.
I guess to help the more expert in here is maybe if you detail what now shows on the Bootscreen, eg VOL Down + Power button.
Have you now got a custom Recovery installed, the common one is Clockwork Recovery?
I believe, that Revolutionary.io is able to handle 2.3.3... anyway it what i used to Root, and it installed CWR and from recovery i was able to point it to the ROM zip file and it all installed fine.
Now i didnt need a goldcard so i cant really say if there some additional steps involved first.

u need revolutionary to make s-off, then u can root it flashing the super user zip from the documentation, u don't need the goldcard, it will also install a custom recovery
official revolutionary site: http://revolutionary.io
official revolutionary doc: http://unrevoked.com/rootwiki/doku.php/public/revolutionary
complete guide: http://wiki.rootzwiki.com/index.php/HTC_Desire

don't worry about it, we are all here to help so let me explain some things.
A goldcard is a tool that allows you to use an unbranded RUU on a branded phone, effectively de branding it, as the RUU (Rom Update Utility) ignores the CID (Customer ID) of the device.
To flash different ROM's, you will need to flash something called "recovery", there are many versions, each arguably, or questionably better than the next. In order to flash recovery, you need to download a recovery image.
Download the above file, rename it to "recovery.img" for simplicity, and put it in your C:\
now the flashing process, there are many tools and utilities you can use, but for now, let's just use command prompt as it does not require you to install anything, just as long as you get the commands right. (you'll also need the file I attached [fastboot.exe], just unzip it into your C:\)
Ok, once you've done the steps stated above, turn your phone off. With it off, PRESS AND HOLD the RETURN/BACK key on your phone, and while still holding it, press the POWER key. This will boot you into "fastboot" mode.
Plug your phone in via USB to your PC.
Open command prompt (start menu, accessories, command prompt)
type the following:
Code:
cd\
fastboot flash recovery recovery.img
Congratulations, you have now flashed recovery. This now allows you to flash ROM's.
Put whatever ROM you would like on your SD-CARD, I recommend CyanogenMod (for No Sense) or MIUI (For something completely different) or RCMixS for Sense (sense 2.1) (all comes with preference)
To boot into recovery, boot into bootloader, (while powered off, press and hold VOLUME DOWN, and POWER), use the volume keys to navigate, and the power key to select. Navigate to RECOVERY and hit power.
When you are booted into recovery, before flashing a new rom IT IS VERY IMPORTANT TO BACK UP!!. You can do this in the "backup and restore" menu.
Once you are backed up, go to "mounts and storage" and use "format [partition]" option, to format boot, system, and userdata.
Then, go to "flash zip from sdcard", and find the ROM you have chosen, and wait for it to finish flashing.
Good luck to you

Wow guys, cant thank you enough
I actually had a small amount of brain oozing out of my ears at one point Thanks for the custom info, like I said, the tuts are excellent, but being new, they are a bit irrelevant if you half way through the process. Trust me to upgrade to an 'unrootable' system a week before I decide to root it
I will remove my flame-proofing now
Thanks again
PP

@bortak
Thats only when he have s-off...If i not wrong he have the stock 2.3.3 with no root an s-on
EDIT: nevermind..i didn't read the post properly..

Hi guys
Im getting an error on fastboot :
This application has failed to start because AdbWinApi.dll was not found. Re-installing the application may fix this problem.
Click to expand...
Click to collapse
Ive tried a different version ,but that came up with the same error. I have android SDK installed in the same directory, is this interfering with it?
Thanks again
PP

palm_pilot said:
Hi guys
Im getting an error on fastboot :
Ive tried a different version ,but that came up with the same error. I have android SDK installed in the same directory, is this interfering with it?
Thanks again
PP
Click to expand...
Click to collapse
Okay, put "fastboot.exe" in c:\android-sdk\platform-tools\
and then before issuing fastboot commands, type:
Code:
cd c:\android-sdk\platform-tools\
this *should* fix it for you

Hi Guys,
This isnt going very well for me
Ive downloaded the .img file tried to flash it. Re-downloaded another copy (in case it was corrupt) , tried to flash that. Changed the file name back to the original (along this command text) to see if it was a recognition issue
On all occasions Im geting :
error: cannot load 'recovery-clockwork-2.5.0.7-bravo.img'
Click to expand...
Click to collapse
Any ideas fellas?
PP

Maybe download 'recovery-clockwork-2.5.0.7-bravo.img' and then select that from unrevoked ?

palm_pilot said:
Hi Guys,
This isnt going very well for me
Ive downloaded the .img file tried to flash it. Re-downloaded another copy (in case it was corrupt) , tried to flash that. Changed the file name back to the original (along this command text) to see if it was a recognition issue
On all occasions Im geting :
Any ideas fellas?
PP
Click to expand...
Click to collapse
Please tell me what code you put before getting that error - or the whole cmd from start to getting that error

BigMrB said:
Please tell me what code you put before getting that error - or the whole cmd from start to getting that error
Click to expand...
Click to collapse
Hi
Im using :
\cd (enter)
Then :
android-sdk\platform-tools\fastboot flash recovery recovery.img
I have revolution installed, can I flash from within this ie. loading the image to the SD and running from within the phone itself?
ATB
PP

cd C:/android-sdk/platform-tools/
fastboot flash recovery recovery.img
(providing you changed the name of your recovery to recovery.img)

[Q] No google apps at all!

Hi guys
Just bought a seconhand Desire. The previous owner had wiped it all clean for me but I dont have marketplace! I have downloaded g apps and installed it from SD card and it installs. But when the phone boots up again there is still no marketplace! I have tried and tried.
Also tried adding and syncing account and it keeps saying unable to connect to server! I have tried everything I can as I am still a newb with this!
Any help or suggestions would be much appreciated!!!

tumo85 said:
Hi guys
Just bought a seconhand Desire. The previous owner had wiped it all clean for me but I dont have marketplace! I have downloaded g apps and installed it from SD card and it installs. But when the phone boots up again there is still no marketplace! I have tried and tried.
Also tried adding and syncing account and it keeps saying unable to connect to server! I have tried everything I can as I am still a newb with this!
Any help or suggestions would be much appreciated!!!
Click to expand...
Click to collapse
go to revolutionary.io and S-OFF the phone.
go to market and download 4EXT recovery control (I think there is free and paid version)
open the app, select the "touch" tab, and select a recovery (the latest recoveries are unavailable on non-paid version)
Then reboot into recovery (power off, hold volume down + power, wait for bootloader to flash green text (ignore it), press volume down to highlight recovery, press power) Once it boots into recovery you can either a) flash google apps b) flash a completely different ROM.
-------------------------------
a) If you don't want a custom ROM, just download gapps, place it on your sd-card (while in recovery, you can plug the phone into pc and select "toggle usb storage"), then go to "install from sd-card" and choose the .zip file you put on your sd-card. Once the process finishes you will have all google apps.
-------------------------------
b) If you would like to flash a custom ROM (I would, they're awesome), then backup your ROM (from backup & restore). Then go to wipe/format and select Wipe ALL partitions (except for sd-card)
Then download a ROM from the android development section, stick it on your sd-card and flash it (install zip from sd-card).
Some ROMs require a custom HBOOT partition before you flash a ROM, and you can get the from alpharev.nl (always make sure to check the md5 sums of the hboot, there is a tool on my troubleshooting guide which does this for you, otherwise you can brick your phone). Always change the hboot BEFORE flashing the ROM

[HOW TO] Unlock bootloader, Root, Flash Custom ROM, Flash Kernel And More!

Post 1: How to unlock your bootloader, flash a recovery and root
Post 2: How to flash a custom ROM and kernel (boot.img)
Post 3: How to reverse everything and go back to stock
Post 4: How to ADB Sideload a ROM
Alright. This is for everyone who wants to root their phone. I've seen MULTIPLE threads of the same question "Can I root my phone and How do I do it". So I hope I never have to see it again! In this tutorial, I use use my toolkit as the way to root. Doing it manually takes forever and that is why I made my toolkit.
Requirements:
HTC One X (charged to at least 70%)
Windows XP,Vista,7 (8 is not officially supported since I don't have the drivers)
USB cable
Ability to read and follow step-by-step
Understanding that I am no way guaranteeing anything. If you screw up your phone, you probably didn't follow my steps and made a foolish mistake.
Let's begin.
Download my toolkit from here.
Link 1 and Link 2
Extract the FOLDER to your C: drive or to your desktop.
MAKE SURE YOUR DIRECTORY DOES NOT HAVE A PERIOD OR SPACE.
Open One X.exe
So now you have my program open. Great.
On your phone, go to Settings -> Developer Options and Enable USB Debugging.
From my toolkit, Click 1. Install HTC Drivers.
After the drivers install, restart your computer.
After your computer loads up, open my toolkit and connect your phone to the computer. Your phone should now be recognized.
Now, click 2. Register at HTCDev. Register with a VALID email address and LEAVE the web browser open.
Now, under the commands section of my toolkit, press Boot into Bootloader.
You should have a nice, white, shiny screen that says FASTBOOT USB.
Click 3. Get Token ID. Look at the pop up and it will tell you how to get the Token ID.
Highlight where it says < < < < Identifier Token Start > > > > all the way to < < < < < Identifier Token End > > > > > and right click and it will automatically copy it.
Now, click Submit Token ID. Your web browser should now open a new tab. Scroll down and in the empty box, paste your Token ID. Press submit. HTCDev now emailed you your unlock token.
Your phone should still be in the bootloader. Now, go to the email address you registered to HTCDev and DOWNLOAD your unlock_code.bin. Press 5. Unlock Bootloader. Locate your unlock_code.bin and it will flash it to your phone.
READ the warning. THIS WILL WIPE ALL YOUR DATA FROM THE PHONE.
When you agree to it, press the volume up button and press the power button to accept it. Your phone will now restart.
When your phone loads up, go through the set up wizard. Then, on your phone, go to Settings -> Developer Options and Enable USB Debugging.
Under the Extras section, press Perm Root. It will push SuperSU.zip to your phone.
Under commands, press Boot into Bootloader once again.
Now, it is time to flash a recovery.
TWRP (Team Win Recovery Project) is a custom recovery that will allow you to flash custom ROMs, Mods, etc.
CWM (ClockWorkMod) is a custom recovery that will allow you to flash custom ROMs, Mods, etc.
I recommend TWRP and we will use it for this tutorial,
Select TWRP and press Flash Recovery.
After it flashes, remove the USB cable and have HBOOT selected in bootloader. Press the power button and it will reload to another screen. Press the Volume Down button until you get to Recovery. Press the power button to select it.
Go to Backup and back up your boot and system partition. Always have a back up before you flash or do anything.
After that, go to Install and locate SuperSU.zip. Click it and slide the screen on the bottom to flash it. After it flashes, reboot the phone.
In your app drawer (your menu with all the apps), open SuperSU. If it says the binary needs to be updated, then update it. If it doesn't, then you are fully rooted!

Post 2: How to flash a custom ROM and kernel (boot.img)
The fun part! Now, I will teach you how to flash a ROM and boot.img
Find a ROM you like, the first thing you should do is make sure it is COMPATIBLE with your phone. If you find a ROM that is for AT&T (Evita) and you have the International model (Tegra3), don't be an idiot and flash it. I will not help you with that since you already agreed to my warning from the first post.
International models won't work on an AT&T HOX and Vice Versa.
Also, DO NOT ASK IF YOU CAN FLASH A ROM FROM ANOTHER DEVICE!
Will it work? NO! Will it ever work? NO! Can I flash it anyways? Brick your device, I don't care. I warned you.
Let's get back on task. So you found the ROM you want to try, so go ahead and download it. KEEP THE THREAD OPEN! MAKE SURE YOU READ EVERYTHING AND REREAD IT AGAIN! READ WHAT USERS SAID ABOUT IT AND ABOUT BUGS! GO AHEAD AND READ THE WHOLE ENTIRE THREAD! GAIN KNOWLEDGE!!
Connect your USB cable to your phone. View the folders on your phone. I like to make a folder called ROMs on my phone and transfer it in there.
After you transfer it, open my toolkit and press Boot into Recovery. When you are in TWRP, MAKE A BACKUP!!!
After you make a backup AKA a Nandroid, click Wipe. Wipe Cache, Dalvik, Factory Reset and System. NOTHING ELSE! If you click anything else, IT WILL WIPE YOUR SD CARD AND YOU WILL HAVE MORE ISSUES ON YOUR HEAD!
So you wiped everything. Great. Your phone is ROMless, Yay!
Now go back and press install. Go to the folder where the ROM you downloaded, is located in. Select the ROM and slide the screen to flash it. After it flashes, press the back button. Press Reboot and Reboot into bootloader. Open the ROM you downloaded from your computer. You should see boot.img. Extract it to your computer. Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it.
After it flashes, press reboot from the phone.
Congrats! Enjoy your fully working or borked ROM! Remember, DO NOT ASK FOR ETAs, DO NOT BUG/PM A DEV ABOUT UPDATES, and BE RESPECTFUL TO THE DEVELOPERS!

Post 3: How to reverse everything and go back to stock
Now, let's talk about getting back to stock. There are 2 ways to do this.
1. Flash the stock RUU (If available) (Recommended)
2. Restore your Nandroid (backup that I told you to make earlier)
1. I'll talk about flashing the stock RUU first.
Go here and download the RUU.
http://forum.xda-developers.com/showthread.php?t=1543604
Download the correct RUU for your phone.
Now, back up all your data (pictures, contacts, etc) since this will put your phone back to complete stock.
Connect the USB cable to your phone. Press Boot into Bootloader.
It should now say FASTBOOT USB on your screen.
Press Relock bootloader. It may give you a security warning error or it may say failed. Who cares, ignore it. It's normal.
Your phone will boot up normally.
When the phone is fully loaded. Unplug and replug the USB cable back in the phone. Now,run the RUU you downloaded and follow the instructions.
Your phone will be back to stock.
2. Now, we will talk about restoring your nandroid backup.
Connect your phone to the computer. Open up the folder to view the files on your phone.
From your computer, Go to TWRP -> BACKUPS -> (Your hardware Serial Number) -> (Folder you wish to restore to) -> and copy boot.emmc.win to your computer. Rename boot..emmc.win to boot.img
Open my toolkit and press boot into recovery.
Click Wipe. Wipe Cache, Dalvik, Factory Reset and System. NOTHING ELSE! If you click anything else, IT WILL WIPE YOUR SD CARD AND YOU WILL HAVE MORE ISSUES ON YOUR HEAD!
Press back and press Restore. Choose the backup to restore to.
After it finishes, press the back button. Press Reboot and select bootloader.
Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it.
You are now back to your stock Nandroid.

4. How to use ADB Sideload
You may have seen what ADB Sideload around the forums but have no idea what it is. Since the HOX does not have an SD card, it makes things harder when you have to flash a ROM.
Here's a scenario when we need to use ADB Sideload.
1. You accidentally wiped your internal SD and have no ROM on your phone
2. You wiped your ROM and forgot to transfer a custom ROM/have no backups(Nandroid) available.
3, You have none of the above and there is no available RUU for your phone. <----- This is a real bummer.
Here are the steps to load on a ROM
I placed TWRP in my toolkit for a reason. CWM does not support ADB Sideload (as far as I know) and TWRP does.
Boot into recovery manually. Turn your device off and hold the VOLUME DOWN + POWER button together until the BOOTLOADER pops up. Press the VOLUME DOWN button until you have selected RECOVERY. Press the POWER button to get into RECOVERY.
Connect the USB Cable to your phone and computer.
In TWRP, click "Advanced" and select ADB Sideload.
Download a ROM to your computer (if you haven't already done so). Rename it as one word. For example CM10.zip, QX.zip, ARHD.zip, etc.
In my toolkit, under the extras section, press ADB Sideload a ROM. Press "Yes" when it asks you if you are in recovery. Then select the ROM you want to install. It will then sideload it to your phone and flash it.
After it finishes, press the back button. Press Reboot and select bootloader.
Pull the boot.img from the zip file and extract it.
Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it.
You now have a ROM on your phone!

1 more, just in case.

and yes, i know. Wrong section. posted here by accident.

thanksss

Thanks for the info you provided.

Hasoon, quick suggestion.
As much as I think your info is quality, I think you should add some screenshots.
If anyone's like me I hate reading massive paragraphs of instructions.
Remember - A picture can speak 1000 words
Thanks though.

Dear hasoon2000
Nice tutorial.. help me alot thx..

worked very fine for me, thanks a lot !! :good:

Is it working with Jelly Beam? And will i be able to get OTA updates after?
Thanx
Sent from my HTC One X using xda app-developers app

OTA
uguaanga said:
Is it working with Jelly Beam? And will i be able to get OTA updates after?
Thanx
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
You won't be able to get official OTA updates after you have flashed a custom rom.
My experience is that even rooting is tricky for official Firmware upgrades.
Even tough there are some ROM's on XDA that have OTA support!

Thanks! Works fine for me!

When you say THIS WILL WIPE ALL YOUR DATA FROM THE PHONE in post 1, does that include sdcard data, photos, music etc?

Since USB mass storage is not available, I've tried using android file transfer to backup my files before unlocking boot loader. Its not working though. Any way to do this?
Sent from my HTC One X using xda premium

nevermind

When acquainted with my HTC this thread helped me. thanks

Htc one x stuck on htc one logo
please help meee
i have an htc one x running jelly bean 4.1.1 and i rooted it ...everything worked finee ... until i installed an app from the play store called font installer after i installed it i changed the font and installed the font ... the notification bar was gone ... i was able to use the device but without the notification bar so i turned it off and on again ... and i get stuck on the htc one logo ... PLEASE ANYONEEE PLEASE HELP MEE ... did i brick the device or what?? pleasee again hellpp and thank you

Nice guide. Thanks.:victory:

[Q] MIUI Rom gone wrong

okay so heres what happened.
I have an international htc one x that is indeed rooted with no roms installed.
I did create a back up and then tried to install the MIUI rom (but I dont really know where that is on my phone. I know I made one with rom manager. I dont have any backups on my computer though)
It worked, however, it didnt have wifi or data signals so i went back to try again.
I opened my bootloader screen. For the record, it is unlocked and hboot is version 1.73 if that helps.
I wiped cashe/data/delvic everything and even factory reset and installed the MIUI RD rom now hoping it would have a difference.
The darn thing got stuck on the MIUI bootloader for hours.
I did the same thing again a few times, sometimes in different orders and then it passed on and another screen came saying 'starting apps'. That got stuck for hours too.
Now I don't have any other roms on my phone, just the MIUI RD. The original miui just vanished too, i dont see it anymore. Also, when I put my USB wire to the phone and connect it to the pc, I cant transfer newer files into it. So this is all I have access to on my phone apparently.
I tried flashing a boot.img and a couple kernels but no luck. I've been trying to do this for all day and this is my first time so I don't know much about it.
I've been googling and somethings say to open cmd and type but i keep getting 'fastboot is not recognized as an internal or external command'
Currently, its not stuck at either the MIUI screen or the Starting Apps. but just the HTC logo screen and not going past.
I don't really want to install any new roms considering i've worked really hard to get this to work and I really want it now more so.
How do i fix this? I want to use this rom.

flash philz recovery (http://forum.xda-developers.com/showthread.php?t=2240646), usb mounting should work on that, then:
steps to install ROM
1. bootloader version should be 1.3x
2. copy ROM to SD Card
3. copy boot.img INCLUDED in the ROM zip to fastboot folder
4. flash the boot.img in fastboot
5. in recovery, wipe system/data/cache/everything
6. flash rom
7. restart

but how exactly do i put it on my phone? my computer isnt detecting my phone when i connect it? im sorry im not exactly an expert on this.

Go to recovery - mounts and storage - hook up the usb cable - tap the last option in the mounts and storage list and wait a few minutes. It won't be mounted instantly

ok i flashed the philtz recovery but when i flash the boot.img it says:
Finding update package
Opening update package
Installing update
installation aborted
for reference: http://forum.xda-developers.com/showthread.php?t=1957490
thats the rom i used and i flashed the boot.img flasher thats right above the download link
edit: also i tried just flashing the rom again and im still stuck on the HTC screen.
its not even going to the miui screen or starting apps anymore. :[

Boot.img must be flashed via fastboot. Not via recovery !

ok, i looked up how to fastboot, downloaded sdk files and i moved the boot.img into the fastboot folder and i opened command prompt there and wrote fastboot flash boot boot.img but i keep getting:
'fastboot is not recognized as an internal or external command'
what did i miss?
EDIT: ok, so the fastboot folder i got from the page didnt work so i used a different fastboot folder, dragged the .boot there and now it worked! finally passed the screen and wifi is connecting!
thank you!

Good, thanks to @tomascus. He summed it up real nice
Cheers