Develop Bugs

Can someone upload froyo so it can be used with ODIN?

I've looked through the entire official froyo thread with no luck. I cannot connect to kies no matter what i do, so i would like to use odin instead. Any help?

+1 add me to do list to I just cant connect to the kies no matter what i do...

rocketpaul said:
I've looked through the entire official froyo thread with no luck. I cannot connect to kies no matter what i do, so i would like to use odin instead. Any help?
Click to expand...
Click to collapse
Seems like SamFirmwares will post it tonight.
Check : http://twitter.com/SamFirmware

Do not update JHC with Odin.
If you do, you will never again get straight updates from Kies..
Also current rom will not start properly if updated with Odin (unless "modified").
Working on it.

oh i see, thanks

@Richthofen .. It is safe to do it with Kies ? Do you know the status of JPC ..Is it a near finished Froyo release , or also just antoher early testrelease ?

Richthofen said:
Do not update JHC with Odin.
Click to expand...
Click to collapse
JHC? The froyo one is JPC.

Bandis710 said:
@Richthofen .. It is safe to do it with Kies ? Do you know the status of JPC ..Is it a near finished Froyo release , or also just antoher early testrelease ?
Click to expand...
Click to collapse
Seems to me to be a more stable (however still a beta) firmware. JIT isn't enabled (when it is we'll see real speed boosts).

INeedYourHelp said:
JHC? The froyo one is JPC.
Click to expand...
Click to collapse
JPC sorry

ht*p://forum.xda-developers.com/showpost.php?p=7914733&postcount=525
Released.

shange said:
Seems like SamFirmwares will post it tonight.
Check : http://twitter.com/SamFirmware
Click to expand...
Click to collapse
It seems the samfirmware website is still not working, anybody else get this to work?

did anyone test flashing that with odin yet?

Well I've just looked at and I can't see how this can work with odin... the only file in the archive is an add_jpc.tar, and then when that is opened in winrar, it contains 5 files:-
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
zImage
ETA: OK I can open the cache.rfs and factoryfs.rfs files in 7zip but still they dont contain the files needed AFAICT.

If its anything like older versions you put add_jpc.tar as the PDA file.
EDIT: Like that
Majkysek said:
I have just flashed my i9k via Odin. Just put out SIM, go to dwnld mode, connect to Odin, stock in 512.pit and file add_jpc, which is possible to download few sites later and flash. Everything seem to work fine till now for me
PS: I have 2.2, when i looked in settings and its pretty fast
Click to expand...
Click to collapse

That's a pretty standard layout, all the files are just rolled into one huge tar file. Someone says flashing that tar with 512 pit worked for them
http://forum.xda-developers.com/showpost.php?p=7915986&postcount=578

Richthofen said:
Do not update JHC with Odin.
If you do, you will never again get straight updates from Kies..
Also current rom will not start properly if updated with Odin (unless "modified").
Working on it.
Click to expand...
Click to collapse
don't understand? If it doesn't work, all you need is to flash back older /workable firmware.

Fornowagain said:
If its anything like older versions you put add_jpc.tar as the PDA file.
EDIT: Like that
Click to expand...
Click to collapse
Thats what I am trying now, cheers.
I am always used to there being seperate files in odin.

i just flashed my add_jpc.tar as PDA file , without any pit , with Odin ...all is ok if someone need the rom i can post it , just tell me where and how to upload

reziel73 said:
i just flashed my add_jpc.tar as PDA file , without any pit , with Odin ...all is ok if someone need the rom i can post it , just tell me where and how to upload
Click to expand...
Click to collapse
That's good to know, although I'm going to wait for Richthofen to come back. Btw, the file is already available > http://www.multiupload.com/GEA547U9PT I have the JPD version as well from the FUD server and it's the same.

Okay, tried to update via odin - fail. It seems that firmware flashes, but during boot cant mount DBDATA

[Q] Bricked my galaxy gio please help

I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem

johnny7788 said:
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
Click to expand...
Click to collapse
can u try another computer with same ver of firmware & odin

johnny7788 said:
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
Click to expand...
Click to collapse
As you are getting Galaxy Gio splash screen, its just a soft brick. Make sure you've installed Samsung Kies and make sure its not running in background (Check the Taskbar systray) while you run Odin. Download the firmware from sammobile.com and install as mentioned in Tutorial (You may find it in the Galaxy Gio section)

Dont use the pit its from later galaxy models
Make sure u flash galaxy gio FW and look for the guides in thr GIO section
Sent from my ST25i using xda app-developers app

tried it
coolsandie said:
As you are getting Galaxy Gio splash screen, its just a soft brick. Make sure you've installed Samsung Kies and make sure its not running in background (Check the Taskbar systray) while you run Odin. Download the firmware from sammobile.com and install as mentioned in Tutorial (You may find it in the Galaxy Gio section)
Click to expand...
Click to collapse
ive used 3 different versions of odin 4.38 4.42 and odin3 v1.85 I cant get to the splash screen just the galaxy gio screen only odin3 v1.85 can read it but at the galaxy gio screen not in download mode ive tried 1click unsoft brick it asks me if my phone is plugged in and in download mode ive made sure kies wasn't running as well everytime I tried and kies 2.0 doesn't support my device it tells me,and that's also at the galaxy gio screen in download mode it doesn't even show up im also running windows 8 as well if that helps anyone figure this problem out for me

used new ops files too
SpaceCaker said:
Dont use the pit its from later galaxy models
Make sure u flash galaxy gio FW and look for the guides in thr GIO section
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
ive used the pit file but not before I used gio v1.0 ops and cooper ops files also none worked

Soft bricked Gio
I rooted my gio with the gio rooting package and tried to flash cwm recovery. Unfortunatlely I forgot to reset and uncheck re-partition and now my phone gives me the Phone---!----computer logo when I boot. (soft brick I think) Even though I have kies, it now does not recognise my phone, and nor does odin. In addition, I need the 2.3.6 Gingerbread NZ stock rom from 2degrees, yet I cannot find it on any of the sites I visit. I can get into download mode but not recovery... can anyone help? Any help will be appreciated, if it is possible to fix my phone

s4meq said:
I rooted my gio with the gio rooting package and tried to flash cwm recovery. Unfortunatlely I forgot to reset and uncheck re-partition and now my phone gives me the Phone---!----computer logo when I boot. (soft brick I think) Even though I have kies, it now does not recognise my phone, and nor does odin. In addition, I need the 2.3.6 Gingerbread NZ stock rom from 2degrees, yet I cannot find it on any of the sites I visit. I can get into download mode but not recovery... can anyone help? Any help will be appreciated, if it is possible to fix my phone
Click to expand...
Click to collapse
ClockworkMod (cwm) http://forum.xda-developers.com/showthread.php?t=1421650
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android-how-to/what-odin-version-you-need-for-your-phone
Download GIO_v1.0,ops:http://HERE
gb_root:http://forum.xda-developers.com/showthread.php?t=1766178
http://www.sammobile.com/firmwares/

Phone now repaired
ptugalx said:
ClockworkMod (cwm) http://forum.xda-developers.com/showthread.php?t=1421650
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android-how-to/what-odin-version-you-need-for-your-phone
Download GIO_v1.0,ops:http://HERE
gb_root:http://forum.xda-developers.com/showthread.php?t=1766178
http://www.sammobile.com/firmwares/
Click to expand...
Click to collapse
My phone is now repaired, considering update.zip for 2.3.5. I will like to know if the recovery mentioned above requires a custom kernel- is it necessary? BTW I am not using Rom manager.

s4meq said:
My phone is now repaired, considering update.zip for 2.3.5. I will like to know if the recovery mentioned above requires a custom kernel- is it necessary? BTW I am not using Rom manager.
Click to expand...
Click to collapse
Does not require a custom-kernel.
upgrade to 2.3.6 and install this cwm.
cwm-5.0.2.7-ext4+rfs-odin.tar.md5 (Flash With ODIN)

can't update
ptugalx said:
Does not require a custom-kernel.
upgrade to 2.3.6 and install this cwm.
cwm-5.0.2.7-ext4+rfs-odin.tar.md5 (Flash With ODIN)
Click to expand...
Click to collapse
No, 2.3.5 is the latest version for my phone's firmware (so no update to 2.3.6)... will I still be able to use this?Please tell me. Also I am considering installing through recovery instead.

s4meq said:
No, 2.3.5 is the latest version for my phone's firmware (so no update to 2.3.6)... will I still be able to use this?Please tell me. Also I am considering installing through recovery instead.
Click to expand...
Click to collapse
see it here_http://forum.xda-developers.com/showthread.php?t=1342190

Thanks
ptugalx said:
see it here_http://forum.xda-developers.com/showthread.php?t=1342190
Click to expand...
Click to collapse
Well, just installed through recovery and pheixz CWM recovery works like a charm. I am now using cm 9 by maclaw. Just a signal problem as this phone was bought from overseas

s4meq said:
A signal problem as this phone was bought from overseas
Click to expand...
Click to collapse
Flash your country's baseband.

Thanks
waqaswasil said:
Flash your country's baseband.
Click to expand...
Click to collapse
This is what Im doing, but why odin v3.09? I have the ops file and the correct version of Odin. (v4.42)
http://www.sammobile.com/firmwares/3/?download=8660
I also want just the baseband.

I did it, but..
waqaswasil said:
Flash your country's baseband.
Click to expand...
Click to collapse
Still a signal problem on maclaws cyanogenmod. Maybe I should have flashed the PDA instead (S5660XXKT6) not the MODEM...
http://www.sammobile.com/firmwares/3/?download=8660
I want to try Maclaw's ASOP platform. What filesystem does it use? EXT4 or RFS?

s4meq said:
Still a signal problem on maclaws cyanogenmod. Maybe I should have flashed the PDA instead (S5660XXKT6) not the MODEM...
http://www.sammobile.com/firmwares/3/?download=8660
I want to try Maclaw's ASOP platform. What filesystem does it use? EXT4 or RFS?
Click to expand...
Click to collapse
Maybe You Have A Hardware (Antenna) Problem, Not A Software (Baseband) Problem
All Custom ROMs Use EXT4 Filesystem
BTW Its AOSP. Not ASOP :silly:

waqaswasil said:
Maybe You Have A Hardware (Antenna) Problem, Not A Software (Baseband) Problem
All Custom ROMs Use EXT4 Filesystem
BTW Its AOSP. Not ASOP :silly:
Click to expand...
Click to collapse
No... There was no water damage, only 1 drop 2 years ago which the phone survived. It was from knee height. I flashed the S5660KKT3 baseband through Odin. Is it the right one? Also, my phone was broken and I got it repaired. when it came back the signal was 5 bars, when I put my SIM card in, but when I installed maclaw's cm9 it was poor. Reboots seem to fix the problem.

[Q] galaxy s3 (3 mobile,UK)wont start.samsung logo screen flashes again and again

I have a samsung galaxy s3 (3 mobile UK).. that is rooted and CWM installed
it was working just fine when it suddenly stuck while running, i pulled out battery and reinserted.... then it started restarting at 3 mobile logo screen but after a while it started to restart just after showing samsung logo..... at first it was going to cwm recovery but now it dont .... i am running icecream sandwich ....
i tried to update it to jelly beans using odin 3.07 with firmware XXEMD2...but NAND failed .... chanding port, restarting computer tried with no success
STUCK .... help..>!!!!!!

aadil.m said:
I have a samsung galaxy s3 (3 mobile UK).. that is rooted and CWM installed
it was working just fine when it suddenly stuck while running, i pulled out battery and reinserted.... then it started restarting at 3 mobile logo screen but after a while it started to restart just after showing samsung logo..... at first it was going to cwm recovery but now it dont .... i am running icecream sandwich ....
i tried to update it to jelly beans using odin 3.07 with firmware XXEMD2...but NAND failed .... chanding port, restarting computer tried with no success
STUCK .... help..>!!!!!!
Click to expand...
Click to collapse
Can the phone still boot into Download mode?

yup
altrikdout21 said:
Can the phone still boot into Download mode?
Click to expand...
Click to collapse
yes.... thats the only thing that my fone goes to

aadil.m said:
yes.... thats the only thing that my fone goes to
Click to expand...
Click to collapse
Download the appropriate zip for your carrier from this link http://forum.xda-developers.com/showthread.php?t=1739426 and then flash with odin. Keep in mind the person that hosted these hosted them on a website with incredibly slow download times. It often cuts out on you too, so make sure at the end of the download the file size is right. You may have gotten a bad download earlier.
If I have helped, slap that thanks button

aeppacher said:
Download the appropriate zip for your carrier from this link http://forum.xda-developers.com/showthread.php?t=1739426 and then flash with odin. Keep in mind the person that hosted these hosted them on a website with incredibly slow download times. It often cuts out on you too, so make sure at the end of the download the file size is right. You may have gotten a bad download earlier.
If I have helped, slap that thanks button
Click to expand...
Click to collapse
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s

Save the phone
aadil.m said:
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s
Click to expand...
Click to collapse
Hi , please go to the sammobile site and choose your exact firm.
Download it and extract it,
Use odin to flash it.

aadil.m said:
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s
Click to expand...
Click to collapse
sorry assumed you wanted root. Just go to sammobile and download a firmware http://www.sammobile.com/firmwares/1/ just put in your phone's info.
Slap that thanks button if I helped

aeppacher said:
sorry assumed you wanted root. Just go to sammobile and download a firmware
Slap that thanks button if I helped
Click to expand...
Click to collapse
it dint work
NAND failed in odin
thaanks for ur help

aadil.m said:
it dint work
NAND failed in odin
thaanks for ur help
Click to expand...
Click to collapse
I would recommend installing kies from samsung and trying to flash the firmware with them. That should fix it no matter what and make sure that you do have the right drivers installed. Also make sure you have the right version of odin running. Here is download link for kies on PC (I assume you have PC) http://downloadcenter.samsung.com/content/SW/201306/20130612104232657/KiesSetup.exe just install, plug your phone in and hopefully it recognizes it. Even if it doesn't, it might install some drivers that make odin work. Let me know if it fixes it

aeppacher said:
I would recommend installing kies from samsung and trying to flash the firmware with them. That should fix it no matter what and make sure that you do have the right drivers installed. Also make sure you have the right version of odin running. Here is download link for kies on PC (I assume you have PC) just install, plug your phone in and hopefully it recognizes it. Even if it doesn't, it might install some drivers that make odin work. Let me know if it fixes it
Click to expand...
Click to collapse
samsung kies dont detect the device... its says device not responding, reboot ur device
odine says same thing ... NAND failed....
went to software specialist shop locally.... even he cannot fix the device
whats wroooooooooooooooong!!!
should i go for re-partition my device with PIT file??

Hhhhheeeeeeeeeeeeeeellllllllllllllpppppppppppppppp!!!

tried to repatition with PIT but failed it says
"there is no pit partition"

aadil.m said:
samsung kies dont detect the device... its says device not responding, reboot ur device
odine says same thing ... NAND failed....
went to software specialist shop locally.... even he cannot fix the device
whats wroooooooooooooooong!!!
should i go for re-partition my device with PIT file??
Click to expand...
Click to collapse
similar issue, last post on first page might help http://forum.xda-developers.com/showthread.php?t=1846867

[Q] flashed official kitkat and kies wont recognize it

After running into some issues while upgrading to an official kitkat firmware I managed to boot up my phone but now it doesnt get recognized by kies even though its official. I also cant see which csc Im on since when I type in *#1234# it simply goes away from the screen as if its been wiped.
any clues? should i flash something else over?

kostas90 said:
After running into some issues while upgrading to an official kitkat firmware I managed to boot up my phone but now it doesnt get recognized by kies even though its official. I also cant see which csc Im on since when I type in *#1234# it simply goes away from the screen as if its been wiped.
any clues? should i flash something else over?
Click to expand...
Click to collapse
What did you use to upgrade? Kies? or Odin?

feckinfinch said:
What did you use to upgrade? Kies? or Odin?
Click to expand...
Click to collapse
Odin

kostas90 said:
Odin
Click to expand...
Click to collapse
Try flashing this in the attachments using odin the same wayy you did the stock firmware, just extract the rar file and use the .md5, and then do a full factory reset then it should recognize.

forget KIES ( completely useless) ! flash SamMobile's firmwares with ODIN !

feckinfinch said:
Try flashing this in the attachments using odin the same wayy you did the stock firmware, just extract the rar file and use the .md5, and then do a full factory reset then it should recognize.
Click to expand...
Click to collapse
Ill get around to it in a few days when my exams will be over. need to back everything up first and that will take a minute. thanks!!

//SM-N920A\\ **N920AUCU4EQC6 NOUGAT Full Odin** - Links UP

Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Here are Odin 3.12.3
Good Luck.

Of course, this will wipe my device again, even though I do not select the CSC?

If you allow it to flash a new system and user data image then yes.
You basically need a wipe anyways going from MM to Nougat.
Sent from my Galaxy Note5 using XDA Labs

I'm already on Nougat N920AUCU4EQC5. I'm just trying to avoid having to wipe my phone

When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?

norbarb said:
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Good Luck.
Click to expand...
Click to collapse
thank you very much for the link, bro.. i'm already Nougated now. experiencing some blue screen, but when i'm using newest odin.. all fixed.. thx again, man, you are the best.

DuganNash said:
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
Click to expand...
Click to collapse
You may use wrong odin, some security installed on your phone, What build are you on?

norbarb said:
You may use wrong odin, some security installed on your phone, What build are you on?
Click to expand...
Click to collapse
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.

DuganNash said:
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
Click to expand...
Click to collapse
Can you post your about phone screen ?

norbarb said:
Can you post your about phone screen ?
Click to expand...
Click to collapse
here you go, thank you

DuganNash said:
here you go, thank you
Click to expand...
Click to collapse
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?

norbarb said:
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
Click to expand...
Click to collapse
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again

DuganNash said:
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
Click to expand...
Click to collapse
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.

norbarb said:
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
Click to expand...
Click to collapse
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives

You're the man !! just the files Odin I was looking for. I want to marry with you ... make me a son jajaja

DuganNash said:
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
Click to expand...
Click to collapse
You have to necessarily erase the security lock fingerprints, you also have to remove the password lock, you have not any type of security lock, then you have to enable developer options and type USB debugging(This last one I do not know if it is strictly necessary, but just in case)If you have some security lock on your phone, even if you pray, you will not be able to!

After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks

TaimooR Khawaja said:
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
Click to expand...
Click to collapse
What did you flash before this stock firmware?
DRK=device root key
Clicking from Edge of Galaxy

Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.

mattern1974 said:
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
Click to expand...
Click to collapse
Same here.. i try to flash it via odin v3.12 it showing pass message..
After reboot my phone still on MM 6.0.1