Related
Hey guys,
I tried getting some help for this over at the Nook Color threads because it all started *after* i rooted my NC, but no one's been able to explain to me what Ive done wrong or whats happened...
So here's the sitch.
o I have ADB installed, but it only activates in device manager when the nook is plugged in, not the G2
o When the NC get usb'd to the PC, it fully registers and gives me access to the SD card on it
o .... where as the G2 just sits there and says "yay im getting power!"
o ,,,, BUT if i plug it into a HUB rather than directly into a usb port on the mobo or front, the PC (win7 x64 ult) seems to see it but doesnt know how to properly assign a driver to it and gives it UNKNOWN
o also i checked the usb-adb ini file, and it lists all my other devices in the hardware cues BUT the G2, which means it hasnt properly registered since then or never had a proper profile to begin with in the PC. It even has my older mt3G listed which I havent plugged in since all this started.
Ive tried multiple driver types, but literately, NOTHING has worked. Its like the G2 isnt even properly registering in the computer when connected. I tried a factory reset, but still no luck. Is there anything beyond a soft fact reset for an unrooted phone? I mean, i need COLD AS STONE back to day 1 reset.
Please help, I really want to root this :'<
and no, the only way now to access my sd card is to turn the thing off and use a reader. Like i said, it literately is NOT seeing it :<
Wrong section. Ask in the Q&A, not the DEV section.
Try installing HTC Sync, even though it doesnt work with the G2 because its sense based, it will install the proper drivers for you. This worked for me.
Heres the link:
http://www.htc.com/www/SupportViewNews.aspx?dl_id=1058&news_id=804
Another method would be install pdanet on you phone fron the Market, then install pdanet for your computer from here and it should install the drivers when you plug your phone in with pdanet app running:
http://www.junefabrics.com/android/
I tried the Sense link, but I couldnt find the download option for it.... anyways, heres a more precise description of the issue
When I go and install PDA Net, it loads up the drivers, but the computer literately is not even registering that a DEVICE has been plugged in via USB. I dont even get the USB connect prompt on the phone!
That's what Im saying, something is up. I need to take the cable with me and try this on another computer now that I think about it to rule out that something isnt damaged on the phone...
What ROM are you using? Gingerbread ROM's act like the (for now), at least from what I understand. I tried CM7 and sure enough - it acted just like what you're describing.
KCRic said:
What ROM are you using? Gingerbread ROM's act like the (for now), at least from what I understand. I tried CM7 and sure enough - it acted just like what you're describing.
Click to expand...
Click to collapse
But thats the whole thing, im not using a ROM, its just the stock OS build. if i was using a ROM, id have tried removing it and reloading it, but this is on a phone that isnt even rooted yet... actually... should I try going temp root again and see if that fixes anything?
Whats the best way to do that now since I keep reading Vision got pulled away because it was damaging phones or something?
Okay, so i tried plugging it into a diff computer.... same result... so whatever it is, its the phone.
Any ideas XDA pplz?
Has it seen the g2 before? if so, get usbdeview, find the drivers in there that would be used for the g2, delete those. Snag PDANet and download that, plug the phone back in and see what ya get. You will get the pop ups again about the new software being loaded since it will have to find and reload drivers for the phone and PDANet will have the drivers you need.
K41N2358 said:
Okay, so i tried plugging it into a diff computer.... same result... so whatever it is, its the phone.
Any ideas XDA pplz?
Click to expand...
Click to collapse
Like the guy above me said, DL or re-DL the drivers (though none should be needed if you're using it as a storage drive, the comp sees it as a usb drive). Is it charging your phone when you plug it in? It's rare, but the USB cable may be bad.
The only other thing I can think of is that something went wrong and the phone isn't releasing the mount to the sdcard, in which case you should try rooting and using a different ROM or a stock rom and it should help.
Well thats the whole thing, the computer doesnt even see the USB part of it. Thats been my whole issue. The computer doesnt see the phone or the usb drive part. It straight does not see the phone at *all*! Doesnt even show up in Dev Manager, but yet it gets power. I even went and got a new micro USB cable, fresh, and still nothing.
im getting to 86 the os and reload Win7, im like super uber pissed over all this because i cant figure it out. I dont even know whats wrong >_<!
Just for kicks (because I had this exact thing happen to another phone of mine - the slide) you're rooted, which means you have clockwork right?
Reboot into recovery and go to the 'mounts' part and select 'mount usb'. Do that with it plugged into your computer and let me know if the phone shows up then. That's the only way I could put it in mass storage mode. I flashed something other than cyanogen's rom and BAM, it worked like it was supposed to (Linux did mount cyanogen though - weird).
If you want to go back to 0 day with your G2, search 'PC10img' and download it. DO NOT FLASH IT YET, you could really screw up your phone since you have s-off. Go to the wiki and scroll to the bottom, it tells you how to get s-on. Once you can verify that you have s-on, proceed to flashing the pc10img.
Wiki
Okay, so, Im way better now. Apparently I managed to get s-off and root ability via
http://forum.xda-developers.com/showthread.php?t=837315
when i reloaded and got rooting ability, somehow, I now have a detectable sd card again.
I dont know how, I dont know why, I just know that Im going to throw CM6.1.1 onto this thing and be rocking it hard
Thanks again for all your help guys, it was awesome to know XDA really helps out its followers
EDIT:
Okay... so now Im mixed. I have a rooted phone, with CM6.1.1, but still doesnt properly recognize when plugged into the PC.
oh well, I already called TMobile and their sending me a new phone under warranty. Its gotta just be a busted port in some way for detection. I dunno. >_<
But still, thanks a lot guys. Means a lot
So, I flashed DK28 on my wifes Epic 4g the other day, and it killed the ability for USB Connectivity. No mounting, no tether, nada. I know what caused it, which was flashing with Odin. What I need to do is revert it back to DI18. To do that, I need to root the phone so I can install Rom Manager to flash CWM back to the phone and then flash DI18 back to the phone.
Before anyone asks, I've tried every possible solution to get passed the "USB Device not recognized" error." Including:
New cables (5 to be exact)
Different USB ports
USB Debugging on and off
Uninstall/Reinstall Drivers
Shutdown PC and unplug power cable for a few minutes
Nothing works. I was wondering if I could root it by copying the CWM files to the SD Card and using Terminal Emulator to run the commands to copy the rageagainstthecage-arm5.bin file and the super user APK to obtain root. Is this possible? Is there any method at all that I can use to get root access without the use of a USB cable? I've also tried that Universal root APK, and that didn't work either. Thanks in advance.
EDIT If you've tried everything, but can't get it to work. Try bending the little "tooth" within the usb port back towards the front of the phone, just a TINY bit. Thank you thank you thank you so much to squshy 7 for the idea. It worked like a champ!
you actually don't need to be rooted to go back to Di18. Just flash it in odin using the stock .tar file
follow these instructions and flash back to 2.1
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SPH-D700#Odin_Stock_Flashing
does odin recognize the phone when you put it in download mode? (press 1 + power button)
Download mode also does not work. I can get into Download mode, but upon plugging in the device, I'm presented with the same "USB device not recognized" error.
z4root will root without a pc.
This thread has a clockwork flashable di18 rom plus modem.
And if you have trouble with rom manager, there is a manual way to install cwm.
and
tetshi said:
I was wondering if I could root it by copying the CWM files to the SD Card and using Terminal Emulator to run the commands to copy the rageagainstthecage-arm5.bin file and the super user APK to obtain root. Is this possible?
Click to expand...
Click to collapse
I don't think so.
I think you can't modify permissions to run rageagainstthecage unless you use adb or have root access. The good news is, if you can get rageagainstthecage to run, you can use a terminal program to do the rest.
But z4root will not run on DK28 if I've read correctly. 2.2.1 patched the vulnerability that z4root was using to root people. So I'm still SOL. =( Thanks anyway though.
Can you take the SD card out and transfer the files to clockwork that way?
Pyperkub said:
Can you take the SD card out and transfer the files to clockwork that way?
Click to expand...
Click to collapse
He doesn't have clockwork.
The OP might be able to do it with adb over wifi. Open run.bat from the one-click in a text editor and follow along. Once you run rageagainstthecage you will have root until you reboot and you can do the rest from a terminal emulator without adb.
I can use ADB over Wifi? Can you give me more information on this method? I have the files for CWM 3.0 ready to go, I just need a way to flash it to the phone, and since I don't have root - I'm sort of at a lose. This has given me hope!
tetshi said:
I can use ADB over Wifi? Can you give me more information on this method?
Click to expand...
Click to collapse
The link in my post above leads to a program to do adb over wifi. I haven't tried rooting with it, so I don't know for sure if it will work for that. There appear to be several utilities on the market that do this. Just search "adb."
And if it does work, or you find an alternative that works, please let us know so we can tell others who are having a problem with usb connectivity.
Oh trust me, if I figure this out - I intend to write an entire guide for people having the same issue. This is the most annoying thing in the world. I should have at least flashed CWM2.5 first, but nooooo... Sheesh.
If it makes you feel better, flashing cwm 2.5.1.0 wouldn't have helped you. Odin wipes it out and puts the stock recovery back.
That does sort of make me feel a little better. I know there has to be a way to do this. I can remote into the device with an wireless SSH server, but I can't run ADB commands on that, and it says it supports wireless ADB also, and I can get ADB to connect, but every time I try to run a command it says "device offline."
Ugh, this is driving me crazy. I know for a fact there is way to do this, I just need to put all these puzzle pieces together.
Just my 2 cents...
But I too had the usb not recognized error...went through all the common solutions and after hours I was losing hope...
But you know what fixed it? Turns out the little usb "tooth" in the phone must have been bent *slightly* down. Because when I stuck a small clothes pin in there and bent it up a little bit, abra kadabra.
Just a thought...because there was absolutely no reason that tooth could have been bent down from anything other than me simply unplugging the phone the last time before I ran in to the problem...it could be your problem too
Sent from my baked and emotionless SPH-D700
squshy 7 said:
Just my 2 cents...
But I too had the usb not recognized error...went through all the common solutions and after hours I was losing hope...
But you know what fixed it? Turns out the little usb "tooth" in the phone must have been bent *slightly* down. Because when I stuck a small clothes pin in there and bent it up a little bit, abra kadabra.
Just a thought...because there was absolutely no reason that tooth could have been bent down from anything other than me simply unplugging the phone the last time before I ran in to the problem...it could be your problem too
Sent from my baked and emotionless SPH-D700
Click to expand...
Click to collapse
Ooooooo, I never tried that yet. I think I'll go ahead and do that and I'll report back once I get the results. Thanks for the idea!
EDIT Oh my god!! IT WORKED! Yes! Thank you so much for the idea. I can not believe it was something that simple. The minute I bent the "tooth" back into place, it worked amazingly. Oh man, you are awesome! Thank you!
tetshi said:
Ooooooo, I never tried that yet. I think I'll go ahead and do that and I'll report back once I get the results. Thanks for the idea!
EDIT Oh my god!! IT WORKED! Yes! Thank you so much for the idea. I can not believe it was something that simple. The minute I bent the "tooth" back into place, it worked amazingly. Oh man, you are awesome! Thank you!
Click to expand...
Click to collapse
Ahhh *****in! I'm glad to hear it...I have a feeling that's the problem with anybody else who has had that "bug". Now I'm off to solve world hunger.
Sent from my baked and emotionless SPH-D700
Awesome! I'm glad to hear you got it solved.
I wonder how often this is the cause of people's connection issues.
DiGi760 said:
Awesome! I'm glad to hear you got it solved.
I wonder how often this is the cause of people's connection issues.
Click to expand...
Click to collapse
I'm willing to bet quite often. As I stated, the ONLY possible cause of that problem was simply unplugging it (or plugging it in)..because literally it was working, I pulled it out for something, then plugged it back in and that was when the problem started. It was only after looking at my girlfriends LG rumour's micro usb port that I noticed a very *slight* difference in the space between its "tooth" and the bottom (the wider edge) and the space of mine..I'm debating on adding it to the wiki...and possibly reporting it to samsung. Should qualify as a hardware defect.
Sent from my baked and emotionless SPH-D700
Wow that's gooD. I don't have any problems yet but if I do I'll try that one. Good find.
You guys rock! I had the exact same problem for the past week and it was seriously depressing me. I couldn't upgrade, couldn't send it back to samsung (since I couldn't return to stock), etc. Stuck a guitar pick in there and like magic ... back in business.
THANK YOU SO MUCH!! now that my hardware problem is fixed I can get back to screwing up the software on my phone!
Hi, im on the DK28 version of froyo, i cant update to ec05 because the phone will no longer mount to any pc, i have tried multiple pc's and multiple cords and cannot get the phone to mount.
When i try to flash the an update.zip other than the dk28 version i get errors. The phone used to have root but when i reflashed DK28 thinking it would fix the sd card issue, i lost root. I cant 0ne click it, i cant odin a rom. It left the Superuser application behind (Which I cant uninstall). Also I tried a wipe data/factory. When i try updating to EC05 i was getting an error 2. Basically im completely stuck on DK28.
At the very least i need to get the superuser application off the phone so i can return it since i believe the mounting issue is a hardware failure.
Does anyone have an update.zip that will not give me a signature error? Or have something i can try to get this fixed enough to return it to sprint.
I am on my phone so can't search for you right now but you are looking for that Samsung.exe file whichb was an Odin-like executable with EB13 stock files. I can look tonight if someone doesn't give you a link before then.
Do you BONSAI?
kennyglass123 said:
I am on my phone so can't search for you right now but you are looking for that Samsung.exe file whichb was an Odin-like executable with EB13 stock files. I can look tonight if someone doesn't give you a link before then.
Do you BONSAI?
Click to expand...
Click to collapse
That sounds like i would have to run the file from a pc, which at the moment, no pc is seeing this phone in either download mode nor via odin, one click or just plain ole mounting.
IzzyRios said:
That sounds like i would have to run the file from a pc, which at the moment, no pc is seeing this phone in either download mode nor via odin, one click or just plain ole mounting.
Click to expand...
Click to collapse
Bro try different t ports on the computer try restarting the phone and computer also if none of that works try different USB cords different computer as well if non of that works u need to get a new USB cable...
Sent from my Epic 4.1g bonsai plant
davidrules7778 said:
Bro try different t ports on the computer try restarting the phone and computer also if none of that works try different USB cords different computer as well if non of that works u need to get a new USB cable...
Sent from my Epic 4.1g bonsai plant
Click to expand...
Click to collapse
Unfortunatly ive tried 3 different cables as well as different computers and different usb ports on each one of them. What i need is a Non-pc involved solution for this. I can live without mounting the phone to the pc, if i could just get upgraded to Sprints official EC05 rom. I know it has its problems, but at least it wont lock me out of ota like DK28 has, and then i can at least take the phone bak to the store at my liesure.
Have you tried removing and reinserting the SD card? When you 3 finger the phone you only get stock recovery? Does the charge light come on with the data cable in the USB port?
kennyglass123 said:
Have you tried removing and reinserting the SD card? When you 3 finger the phone you only get stock recovery? Does the charge light come on with the data cable in the USB port?
Click to expand...
Click to collapse
The charging portion works fine, also i have 2 diff micro sd's tried with either one in and with neither in. didnt work. 3 finger only gives me stock and not Cwm anymore since i reflashed DK28
IzzyRios said:
The charging portion works fine, also i have 2 diff micro sd's tried with either one in and with neither in. didnt work. 3 finger only gives me stock and not Cwm anymore since i reflashed DK28
Click to expand...
Click to collapse
Have you tried toggling the USB debugging mode? Also try download mode (power on holding "1" key) then see if Odin recognizes your phone.
kennyglass123 said:
Have you tried toggling the USB debugging mode? Also try download mode (power on holding "1" key) then see if Odin recognizes your phone.
Click to expand...
Click to collapse
yes to both. odin does not see the phone. Im certain that its a hardware problem at this point, which is why im looking for an update zip i can manually put on the card that will let me flash ec05 on to the phone and erase super user. at the very least i want to remove super user.
IzzyRios said:
yes to both. odin does not see the phone. Im certain that its a hardware problem at this point, which is why im looking for an update zip i can manually put on the card that will let me flash ec05 on to the phone and erase super user. at the very least i want to remove super user.
Click to expand...
Click to collapse
I thought the sd cards won't mount? If they do then it will have to be a signed update zip that doesn't check for the stock apps and previous modem version.
kennyglass123 said:
I thought the sd cards won't mount? If they do then it will have to be a signed update zip that doesn't check for the stock apps and previous modem version.
Click to expand...
Click to collapse
Im Sorry i should have clarified this. The phone can see the SD cards just fine..Internally. But when i connect a cable (any cable, i have 4) to the pc (any pc, i tried on 3 dif pc's one xp, two windows 7), i cannot see the cards from the PC, odin does not see the phone, etc, basically interfacing between the 2 is nil. I am currently taking the micro sd card out of the phone, putting it into a usb adaptor and copying files to it from the pc that way, then returning the card to the phone in order to try to update it. My problem is, i need a Rom that will update without trying to verify the signature since it thinks my phone is rooted, even though it isnt anymore. At this point i wouldnt even mind a wipe since i did that yesterday anyway, just going back to DK28 Stock. Problem with Dk28 is it doesnt allow the OTA of Ec05 to come in.
Ok got it for you. Try this for update.zip to get you to DI18:
http://forum.xda-developers.com/showthread.php?t=786266
Do you BONSAI?
kennyglass123 said:
Ok got it for you. Try this for update.zip to get you to DI18:
http://forum.xda-developers.com/showthread.php?t=786266
Do you BONSAI?
Click to expand...
Click to collapse
Yeah this didnt work. the first link is broken, but once i found the rom much further in the thread i got it. Trying to install it produces this error...E:Signature Verification Failed. Installation abouted.
IzzyRios said:
Yeah this didnt work. the first link is broken, but once i found the rom much further in the thread i got it. Trying to install it produces this error...E:Signature Verification Failed. Installation abouted.
Click to expand...
Click to collapse
Look further in the thread to see if someone put up a signed version. Amend2edify will create a signed zip, it may convert the one you downloaded. I found that thread by googling "update.zip for dk28 samsung epic" there were a lot more results I didn't check out.
Do you BONSAI?
kennyglass123 said:
Look further in the thread to see if someone put up a signed version. Amend2edify will create a signed zip, it may convert the one you downloaded. I found that thread by googling "update.zip for dk28 samsung epic" there were a lot more results I didn't check out.
Do you BONSAI?
Click to expand...
Click to collapse
The rom i downloaded had signed in the name and its what gave me the signature error.
stock.di18.deodexed.updatev3.signed.zip
IzzyRios said:
The rom i downloaded had signed in the name and its what gave me the signature error.
stock.di18.deodexed.updatev3.signed.zip
Click to expand...
Click to collapse
D'OH! There is a thead with flashable stock ec05 roms. Maybe you can ask the dev to make it work as a signed flash from stock recovery.
Do you BONSAI?
Dial ##8778## and make sure that PDA is checked under the USB setting
stir fry a lot said:
Dial ##8778## and make sure that PDA is checked under the USB setting
Click to expand...
Click to collapse
What does that do?
Well for one it can cause your USB not to mount..
There is a guy named drockstar in the development section that has stock roms posted they might be able to help you
Sent from my SPH-D700 using XDA Premium App
Device and Software: HTC Inspire 4g, JellyTime r29(previously Android Revolution HD 6.3.1)
Problem:
Cannot choose how to connect to PC(no usb options appear on the phone), the phone starts charging as soon as I plug it in.
Possible Cause:
I connected my phone to a USB port on a car stereo and my phone and the stereo kept flipping back and forth between screens. I disconnected the phone immediately, but the USB connected icon was still in my notification bar. I restarted the phone and everything seemed fine until I tried to plug my phone in 3 days ago.
Things I've Tried Already:
-Restarting the phone
-Pulling the battery
-Trying different USB Ports
-Trying different cables
-Trying different PCs
-Trying USB Debugging both on and off
-Trying fastboot on and off
-Trying an "auto-mount" app(Multi-Mount SD)
-Trying "USB Mass Storage" App for Jelly Bean
-Setting Disk Drive mode as default and turning the "Ask Me" option on and off
-Reflashing the ROM (followed these directions for flashing: http://forum.xda-developers.com/showthread.php?t=1257731)
-Flashing the USB fix found here: http://forum.xda-developers.com/showpost.php?p=24198708&postcount=90
-Flashing a new ROM
-Searching for a solution(derp).
Try a different ROM?
When you fall, don't expect anyone to help. Expect the floor
GuyInTheCorner said:
Try a different ROM?
Click to expand...
Click to collapse
I was thinking about it, but this one has been working fine for months so It seems unlikely to me that that's the cause, especially when i haven't come across anyone running the same ROM with the same problem.
I'll still think about it, I dunno what ROM I'd switch to though. I liked CyanogenMod 7 but that one wouldn't run videos correctly for some reason :\
GuyInTheCorner said:
When you fall, don't expect anyone to help. Expect the floor
Click to expand...
Click to collapse
Not really sure how that's relevant, but ok.
Gogetalvl4 said:
I was thinking about it, but this one has been working fine for months so It seems unlikely to me that that's the cause, especially when i haven't come across anyone running the same ROM with the same problem.
I'll still think about it, I dunno what ROM I'd switch to though. I liked CyanogenMod 7 but that one wouldn't run videos correctly for some reason :\
Not really sure how that's relevant, but ok.
Click to expand...
Click to collapse
I have had ROMs get glitchy over time; no idea why, but I have seen it happen. And I think that second line is just his signature.
Gogetalvl4 said:
Not really sure how that's relevant, but ok.
Click to expand...
Click to collapse
Its my xda signature. You can edit it in the xda ap settings
When you fall, don't expect anyone to help. Expect the floor
GuyInTheCorner said:
Its my xda signature. You can edit it in the xda ap settings
When you fall, don't expect anyone to help. Expect the floor
Click to expand...
Click to collapse
Ah, most forums have a bar separating the signature from the post so I was confused lol.
Just flashed JellyTime, I still have the same problem :\.
It charges fine right?
When you fall, don't expect anyone to help. Expect the floor
Yup. I just tried using USB Mass Storage app for JB, and that doesn't work either, although apparently the app does know that the USB is plugged in.
Most likely a port problem on your device. Go to a repair shop and see how much they charge
When you fall, don't expect anyone to help. Expect the floor
GuyInTheCorner said:
Most likely a port problem on your device. Go to a repair shop and see how much they charge.
Click to expand...
Click to collapse
Well that sucks. I did get it to come up once by flashing a rooted stock rom, but when I selected disk drive nothing showed up on my PC, and when I disconnected it and reconnected it the icon wouldn't show up anymore XP
.:Edit:.
I just realized I put this in the wrong forum .
Gogetalvl4 said:
Well that sucks. I did get it to come up once by flashing a rooted stock rom, but when I selected disk drive nothing showed up on my PC, and when I disconnected it and reconnected it the icon wouldn't show up anymore XP
.:Edit:.
I just realized I put this in the wrong forum .
Click to expand...
Click to collapse
Try going to a fully stock state (S-ON, stock no root) and see if it helps. If not, definitely a port problem.
When you fall, don't expect anyone to help. Expect the floor
How do you do that without being able to connect to the PC?
Flash an RUU. I'll ask someone from the Ace Think Tank to help you, they're the best
If I find a link to an RUU ill post it. Where you from in the world?
When you fall don't expect anyone. Expect the ground
GuyInTheCorner said:
Flash an RUU. I'll ask someone from the Ace Think Tank to help you, they're the best
If I find a link to an RUU ill post it. Where you from in the world?
When you fall don't expect anyone. Expect the ground
Click to expand...
Click to collapse
I found this one(the bottom one), but it says I have to be connected to a PC to get it to work. Also, I'm from America.
First flash a different rom see if the same issue happens in that rom. You can also boot into recovery and try mounting the sd card before flashing a ruu. You may also want to reinstall the drivers for your phone (the drivers on your pc).
Sent from a dream.
Teichopsia said:
First flash a different rom see if the same issue happens in that rom. You can also boot into recovery and try mounting the sd card before flashing a ruu.
Click to expand...
Click to collapse
Tried both of those multiple times.
Teichopsia said:
You may also want to reinstall the drivers for your phone (the drivers on your pc).
Click to expand...
Click to collapse
I've reinstalled the drivers that come with the Advanced Ace Hack Kit multiple times. Do you think I should I uninstall them and use the stock drivers?
Gogetalvl4 said:
Tried both of those multiple times.
I've reinstalled the drivers that come with the Advanced Ace Hack Kit multiple times. Do you think I should I uninstall them and use the stock drivers?
Click to expand...
Click to collapse
Yeah, sorry about that. I skimmed through the post. After submitting the reply I saw that you already tried a different rom. You could give that a shot, installing htc sync. Have you tried the sd card on a different phone, or connected directly to the computer or a different sd card on your phone? Besides this I'm out of ideas.
Teichopsia said:
Have you tried the sd card on a different phone, or connected directly to the computer or a different sd card on your phone? Besides this I'm out of ideas.
Click to expand...
Click to collapse
Yup, the SD card works on my old Samsung Rant. I'll try installing the stock drivers, thanks for trying to help.
Ahh Tei has joined the party
I'm still sticking with a port replacement, it's the last thing that's left (as far as I can think of)
Sent from my GT-N8010 using xda app-developers app
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
jconway1968 said:
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
Click to expand...
Click to collapse
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
bmg002 said:
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
If you flashed TWRP 2.6.3, that's your problem.
Flash 2.6.1
This is the wrong section because it has nothing to do with ROM development.
With that being said if you can still boot into twrp you still have hope. Try loading a different ROM into an SD card using a converter and slide back in the phone to properly wipe first then re flash.
I don't understand why you can't get a proper USB connection going but above suggestion may solve it.
Sent from my SGH-T989 using xda app-developers app
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
jconway1968 said:
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
Click to expand...
Click to collapse
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
bmg002 said:
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
Click to expand...
Click to collapse
Thanks for your help. Here are the answers to your questions:
I think there is something wrong with the micro USB input on the phone. I have reinstalled the drivers several times. I have tried different cables and different computers. I even tried the toothpick trick. No luck.
I do have a GN2. The SG2 is for my daughter...
It is a genuine SGH-T989 I checked under the battery.
soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
jconway1968 said:
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
Click to expand...
Click to collapse
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
jconway1968 said:
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
Click to expand...
Click to collapse
In twrp settings change it to use rm instead of formatting
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
jconway1968 said:
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
Click to expand...
Click to collapse
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
soupysoup said:
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
jconway1968 said:
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
Click to expand...
Click to collapse
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
bmg002 said:
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
Click to expand...
Click to collapse
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
jconway1968 said:
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
Click to expand...
Click to collapse
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
bmg002 said:
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
Click to expand...
Click to collapse
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
jconway1968 said:
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
Click to expand...
Click to collapse
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
bmg002 said:
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
Click to expand...
Click to collapse
You were great!!! Thanks again...