During ODIN modem flash, pc froze and rebooted, now I just get a blue status light - Samsung Epic 4G Touch

OK my PC froze and rebooted in the ODIN modem flash process. Now my phone only has a solid blue light in the top right corner (status light)
I can't get to odin download mode, or android recovery.
Any help here?

do you have a usb jig to force it into download mode? sorry to say man but you might be bricked. try taking out your battery and push the power button and hold with battery out for like 10 minutes. leave the battery out for another 20. hook it up to your computer with no battery try to put it in download mode again. if that doesn't work you may need a jtag as its more than likely hard bricked.

usb jig?
I will try those right now.
Thank you very much for your info

superhard1 said:
OK my PC froze and rebooted in the ODIN modem flash process. Now my phone only has a solid blue light in the top right corner (status light)
I can't get to odin download mode, or android recovery.
Any help here?
Click to expand...
Click to collapse
Unplug your phone and remove the battery, put the battery back in, try to put it back in download mode. If that doesn't work you will have to take it to sprint and hope they exchange it, I think I answered this question earlier today.

rayprobg said:
Unplug your phone and remove the battery, put the battery back in, try to put it back in download mode. If that doesn't work you will have to take it to sprint and hope they exchange it, I think I answered this question earlier today.
Click to expand...
Click to collapse
I've tried pulling the battery. Same thing, just blue light.
It has a bad ESN, can't go back to sprint. Samsung maybe...
I found the jig you were talking about, I bought one on ebay. Fingers crossed that'll work for me.

ya you might need to have it jtag. good luck man hope you don't need to do that man

jtag?
What's that?

Essentially it means pay somebody with special equipment to flash your phone. It is a hardware-level connection used to flash but often isn't exported in a nice easy to use interface once a device goes into production.

link
http://bit.ly/wnHpCV

Epix4G said:
http://bit.ly/wnHpCV
Click to expand...
Click to collapse
that is awesome!

LOL that was pretty cool. Who thinks of this stuff...

Related

Need serious help..phone is bricked

cant get into DL mode to Odin back to stock EC05
but i was trying to flash the new ee03 modem and put the .tar file in PDA instead of PHONE by accident and it said it was a success but when mi phone went to reboot it never did now it wont turn on and i get no leds or anything when charging ...any help pleasseeee
bradbutter said:
cant get into DL mode to Odin back to stock EC05
but i was trying to flash the new ee03 modem and put the .tar file in PDA instead of PHONE by accident and it said it was a success but when mi phone went to reboot it never did now it wont turn on and i get no leds or anything when charging ...any help pleasseeee
Click to expand...
Click to collapse
First things first you are supposed to put the modem in the PDA slot, in fact i have seen K0nane say it really doesn't even matter with the modem.
1. Did your battery have some charge left before it died?
2. Have you tried using odin without the battery in?
Try this:
Disconnect USB Cable (if Connected)
Remove Battery
Reconnect USB Cable
Hold 1
Press power
If this doesn't work, then you're probably looking at a hardware replacement.
dtm_stretch said:
First things first you are supposed to put the modem in the PDA slot, in fact i have seen K0nane say it really doesn't even matter with the modem.
1. Did your battery have some charge left before it died?
2. Have you tried using odin without the battery in?
Click to expand...
Click to collapse
*edit *
i had tried but for some reason it worked now ..maybe its alive and knows im on the forum and wants to make me look like an idiot ..but the method of using Odin without the battery in is working now....results in a few mins
potatoboyjs said:
Try this:
Disconnect USB Cable (if Connected)
Remove Battery
Reconnect USB Cable
Hold 1
Press power
If this doesn't work, then you're probably looking at a hardware replacement.
Click to expand...
Click to collapse
i had tried but for some reason it just worked...idk lol
but i want to use the new ee03 rom but i have to flash this modem again ..going to re download modem and try to flash it with my fingers crossed that it doesnt brick again

[Q] Unable to Odin/CWM restore

I have had my Epic for few months now, and have yet to encounter this error. Today both my parents decided to buy the Epic's (woot 3 epics in the house), and so I go and try to Root it for them. I go to the first one, and put CWM 3.1.0.1 on it. Everything goes fine, I reboot into CWM, everything dandy, shutdown and go into download mode (Hold 1 then press power button), done this many times. But here came the problem. Odin has failed during the flash and now the phone shows (Phone ---- ! ---- Computer) display when I try to boot it up or try to go into CWM. So I have tried Odin again with download mode, I did get the yellow download screen, but Odin keeps failing. I have tried different USB ports/cables. Different pit files and modems, including EB13, EC05 and EH06. And I am sure the files work, as I have just tried the second phone, and everything went fine. ... So yeah... uh... Attached are two screenies.
This is my Odin Print out
And this is the screen I get
NVM, got it to work using this :
kennyglass123 said:
There is still hope. Take out the battery and hold the power button for 30 seconds. Leave the battery out and plug the USB into the computer and then hold the "1" key on the keyboard and then press and hold the power button. It should get you back into download mode.
Click to expand...
Click to collapse
Glad you got it fixed!
(And that you searched, albeit after posting XD)
Posted by Mr. Z's Epic 4G.
Thank you for that post. Kids loaded some stuff on my notebook and it froze during Odin. Just happened to happen on this thread and Viola. Download mode accessed, Odin fixing.
I was about to go to Sprint today.
I love XDA.
Sent from my SPH-D700 using XDA Premium App
Hey that was my quote...YAY!
Glad you got it fixed dude!
Well, the true fix for me is the Battery is bad somehow... I can Odin like nothing if I take the battery out, but the second the battery is in and I try to Odin, it Fails... is this the case for you guys?
shiroimin said:
Well, the true fix for me is the Battery is bad somehow... I can Odin like nothing if I take the battery out, but the second the battery is in and I try to Odin, it Fails... is this the case for you guys?
Click to expand...
Click to collapse
I think that is caused by whether your computer has a powered or non-powered USB port.
no, because I have Odined 2 other Epics on the exactly same cable and same USB port, so it has nothing to do with that. It was truly just the battery.
shiroimin said:
no, because I have Odined 2 other Epics on the exactly same cable and same USB port, so it has nothing to do with that. It was truly just the battery.
Click to expand...
Click to collapse
Did you try swapping the battery from the other Epic and see if it truly is interfering somehow?

Please help! Cable disconnected during ODIN - hard brick??

I was in process of rooting Epic 4G touch in ODIN and the cable got disconnected. I don't think "Re-partition" flag was on but I may be wrong.
Phone is completely dead. Only blue light blinks while trying to turn on.
I mean - there is no recovery/CWM/not even download mode. ;(
Can anything be done?
Do you have a jig?
Got boost?
I don't.
Will this work http://www.amazon.com/SainSmart-Don...=dp_return_2?ie=UTF8&n=2335752011&s=wireless?
Also, haven't heard of boost.
Will above work with broken partitions?
selytch said:
I don't.
Will this work http://www.amazon.com/SainSmart-Don...=dp_return_2?ie=UTF8&n=2335752011&s=wireless?
Also, haven't heard of boost.
Will above work with broken partitions?
Click to expand...
Click to collapse
That was just his signature ... Got boost?
Home made jig does not help. Apparently, if the screen does not even turn on nothing can be done.
First time in 10 years I brick a phone to point of no return!
Now lets try if TEP works...
try removing battery from phone , place battery back in phone , put it on the charger for about an hour see if you than get into odin mode again
Let me know what you end up doing.
Samsung Epic 4g Touch - Calkulin's v1.1
My only option was jtag service. He charged me 30 bucks. I renamed the wrong file and flashed i9000 firmware on my phone (smh.), thought it was a goner.
in my experience, if you can't get into download mode, force your phone into download mode with a jig, or get into recovery, send it off for repair.
I sent it to the guys at mobiletechvideos.com
Sent from the future.
By the way, what happens when you try and enter download mode?
Sent from the future.

[q] asking about phone brick!

When I finish restore my back up, I reboot my phone and it get brick (JUGG 5.0)!!! I cannot even press any button to turn the screen on!! Already try with different charger, battery and sim card also!! Does someone have any idea please!!
Try the long power button press. Press the power button and hold it for like 10 seconds (Maybe more, it always feels more then 10 seconds). The phone should vibrate 3 times and then you release.
If that doesn't work, then see if you can get into download mode and get Odin to recognize your phone.
I already try, I press it nearly 1 minute, but the screen doesn't turn on!
what exactly are you doing? you were making a backup in cwm, it finished and then you rebooted?
I flash a new Rom, but I don't like it. So I use Darkside Superwipe to wipe all cache and data of that Rom so that I can do the back up. After the back up process is finished,(I see everything runs well). I reboot the phone and it gets brick.
gunbreak said:
I flash a new Rom, but I don't like it. So I use Darkside Superwipe to wipe all cache and data of that Rom so that I can do the back up. After the back up process is finished,(I see everything runs well). I reboot the phone and it gets brick.
Click to expand...
Click to collapse
I am not quite understanding. You made backup, or did you restore a backup that you previously made? Anyways, If the phone wont boot try to put in in dl mode and odin it back to stock.
xcrazydx said:
I am not quite understanding. You made backup, or did you restore a backup that you previously made? Anyways, If the phone wont boot try to put in in dl mode and odin it back to stock.
Click to expand...
Click to collapse
Oh I understand u, I restore my back up. How can I put it in the mode that you say? I can't even turn the screen on can you please help me!
gunbreak said:
Oh I understand u, I restore my back up. How can I put it in the mode that you say? I can't even turn the screen on can you please help me!
Click to expand...
Click to collapse
Before you try to odin it, can you get into cwm by holding the volume up, down, and power. Release power when first samsung logo appears. stay holding vol buttons until cwm pops up. can you get into this?
xcrazydx said:
Before you try to odin it, can you get into cwm by holding the volume up, down, and power. Release power when first samsung logo appears. stay holding vol buttons until cwm pops up. can you get into this?
Click to expand...
Click to collapse
No, it doesn't work. All the buttons freeze now
You most likely are hard bricked, but you still have a slight chance to get into download mode. Not sure how you managed a brick by restoring a backup, but I'll try to help.
Ok, you are going to need the drivers for your phone. http://www.mediafire.com/file/6onrjbyd46j4lhj/T-Mobile_t989_GSII_ADB_Drivers.zip
You need odin as well, download it. http://www.mediafire.com/?u868rqz4qn0ta34
These links were provided by KonstantinKeller
Go here http://www.sammobile.com/firmware/ and make an account. I use sammobile because it contains everything in one shot. No need to get radio and crap from other places. After you make an account go to firmware section and type t989 in the search box. download the t989uvkid. ASSUMING YOU HAVE AMERICAN T989
After you have completed the download you are going to need to unzip it with 7zip to extract the tar.
Plug the USB cable into your computer, without plugging it into your phone.
Hold VOL UP + VOL DOWN while plugging in the USB cable to your phone. Stop holding buttons when the ''Warning'' appears.
Press Volume UP and start ODIN (Run as Admin on Vista and 7, just to be safe)
Click PDA and locate the MD5 file you extracted earlier.
WAIT FOR ODIN TO RECOGNIZE YOUR PHONE. THE COM PORT WILL TURN YELLOW AND HAVE A NUMBER
MAKE SURE NOTHING BUT AUTO REBOOT IS CHECKED!!!!!!!
Press 'Start' and be patient. It will take a few minutes because it is a large file.
phone will reboot automatically.
If you can't get the phone to be recognized try different usb ports or a different computer if you have another. This may not work at all, considering it sounds like you are hard bricked. Good luck!
I should download T989UVKID or T989UVKL1? I think my phone get android 2.3.6
gunbreak said:
I should download T989UVKID or T989UVKL1? I think my phone get android 2.3.6
Click to expand...
Click to collapse
it won't matter. if you want the newest grab kL1
Window told me "no driver found" after I already installed the samsung driver!
gunbreak said:
Window told me "no driver found" after I already installed the samsung driver!
Click to expand...
Click to collapse
Delete that driver setup and use kies. http://www.samsung.com/us/kies/
I think it already died, no driver found again. I try in device manager, it appears as Samsung Android ADB interface, but nothing appears on my screen it's such a hard brick....
gunbreak said:
I think it already died, no driver found again. I try in device manager, it appears as Samsung Android ADB interface, but nothing appears on my screen it's such a hard brick....
Click to expand...
Click to collapse
Just do this and see if it goes into DL mode.
Plug the USB cable into your computer, without plugging it into your phone.
Hold VOL UP + VOL DOWN while plugging in the USB cable to your phone. Stop holding buttons when the ''Warning'' appears.
If not, you have 2 options
Send to this guy for jtag repair for $50 http://mobiletechvideos.mybigcommerce.com/
OR warranty it through samsung
I should warranty it through Samsung or ask for replacement phone through Tmobile? (I have insurance in my plan). I wonder if Tmobile find out my phone is rooted and I have to pay for the replacement phone. Do you have any idea?
gunbreak said:
I should warranty it through Samsung or ask for replacement phone through Tmobile? (I have insurance in my plan). I wonder if Tmobile find out my phone is rooted and I have to pay for the replacement phone. Do you have any idea?
Click to expand...
Click to collapse
You can go to the tmobile store and tell them it wont turn on. you wont need your insurance plan, the phone carries a warranty against defects for 1 year. Just play dumb and say it wont turn on and demand a new phone.
Do u have any idea if Tmobile check the phone or not?
gunbreak said:
Do u have any idea if Tmobile check the phone or not?
Click to expand...
Click to collapse
They can't tell anything if it's hard bricked. You're fine man, Get a new one.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Flashed Android Revolution, device stopped reponding

About 20 minutes ago I started Flashing Android Revolution HD on my device then the screen went black. Nothing's happened since then and now it won't start up or anything. What's going on?
I do believe that rom is for the international gs3.
Sent from my Galaxy S3
Well is there anything I can do at this point, or have I totally bricked my device?
Driice said:
Well is there anything I can do at this point, or have I totally bricked my device?
Click to expand...
Click to collapse
Do you know how to get into download mode a.k.a. Odin mode?
theROMinator said:
Do you know how to get into download mode a.k.a. Odin mode?
Click to expand...
Click to collapse
Yeah down volume, home, and lock button right?
I tried it and nothing. Same with recovery mode. Kies all can't detect my phone.
I guess I managed to ruin my phone :\
Driice said:
Yeah down volume, home, and lock button right?
Click to expand...
Click to collapse
Yes, sir, please get into that mode for me but first make sure your phone is off and then i'll guide you through the rest.
BTW: Are you at a computer? This requires you to download a stock image for your device which is around ~600MB.
theROMinator said:
Yes, sir, please get into that mode for me but first make sure your phone is off and then i'll guide you through the rest.
BTW: Are you at a computer? This requires you to download a stock image for your device which is around ~600MB.
Click to expand...
Click to collapse
Can you think of anything else I can do or should I go into At&T and try and get a new phone under warranty?
Driice said:
Can you think of anything else I can do or should I go into At&T and try and get a new phone under warranty?
Click to expand...
Click to collapse
Dude, this is very simple. I wouldn't recommended getting a new phone if it can be easily fixed.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
theROMinator said:
Dude, this is very simple. I wouldn't recommended getting a new phone if it can be easily fixed.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Ok well I can't go into recovery mode or download mode on my phone. My computer recognizes a device is being plugged in, but can't tell its my phone. What should I do?
Driice said:
Ok well I can't go into recovery mode or download mode on my phone. My computer recognizes a device is being plugged in, but can't tell its my phone. What should I do?
Click to expand...
Click to collapse
First, try this, and then let me know what happens: http://forum.xda-developers.com/showthread.php?t=1727443
theROMinator said:
First, try this, and then let me know what happens: http://forum.xda-developers.com/showthread.php?t=1727443
Click to expand...
Click to collapse
I have the tar file in PDA on ODIN, but I can't get my device into download mode because it won't respond. I tried hitting start on Odin anyway but nothing happened.
I was thinking I could tell my computer somehow the device is my phone but I'm not sure if that would help without it being in download mode.
Edit: I'm reading through the post and discovered people in a similar position to me, my charging light does turn on red with no battery in. I'll see if there's some magic fix on that thread somewhere.
Driice said:
I have the tar file in PDA on ODIN, but I can't get my device into download mode because it won't respond. I tried hitting start on Odin anyway but nothing happened.
I was thinking I could tell my computer somehow the device is my phone but I'm not sure if that would help without it being in download mode.
Click to expand...
Click to collapse
Okay so we need to focus on getting your phone into DL mode. Pull the battery for one minute and hold the power button down for ten seconds; re-insert the battery and try to get into DL mode again.
theROMinator said:
Okay so we need to focus on getting your phone into DL mode. Pull the battery for one minute and hold the power button down for ten seconds; re-insert the battery and try to get into DL mode again.
Click to expand...
Click to collapse
No luck.
The only thing I can get it to do is turn the red light on when I plug it in with no battery
If you're sure you can't get into download mode then your best bet is to get a USB jig. They're fairly inexpensive, i'll link you one. This jig has good reviews and works for pretty much any Samsung device with DL mode:
http://www.amazon.com/gp/aw/d/B0053H73JQ/ref=mp_s_a_1?pi=SL75&qid=1347248180&sr=8-1
Edit: I'll be buying one eventually to test it out. Just ordered one, it will be here Tuesday.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
why would you flash that rom?
theROMinator said:
If you're sure you can't get into download mode then your best bet is to get a USB jig. They're fairly inexpensive, i'll link you one. This jig has good reviews and works for pretty much any Samsung device with DL mode:
http://www.amazon.com/gp/aw/d/B0053H73JQ/ref=mp_s_a_1?pi=SL75&qid=1347248180&sr=8-1
Edit: I'll be buying one eventually to test it out. Just ordered one, it will be here Tuesday.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I'm reading all about how the S Series is almost impossible to really brick, so trying this USB Jig couldn't hurt I guess. I mean it's 4 bucks so I'll try it and update with how it goes
and Wond3r: Because I'm a dumbass
Subscribe to the thread. I will post my results when I get the jig. I read that it works in the thread I linked you to. Don't worry
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
lolll............
Dude sorry to say but you are done, this has happened to plenty of people on this forum. Your phone is dead (the jig WILL NOT help you, you will need a jtag/warrantee to fix it at this point. Your phone will probably say qusb_dload or something if you try to plug it into your pc, further confirming that fact.
Driice said:
I'm reading all about how the S Series is almost impossible to really brick, so trying this USB Jig couldn't hurt I guess. I mean it's 4 bucks so I'll try it and update with how it goes
Click to expand...
Click to collapse
hahaha, not this one,VERY easy to brick
theROMinator said:
If you're sure you can't get into download mode then your best bet is to get a USB jig. They're fairly inexpensive, i'll link you one. This jig has good reviews and works for pretty much any Samsung device with DL mode:
http://www.amazon.com/gp/aw/d/B0053H73JQ/ref=mp_s_a_1?pi=SL75&qid=1347248180&sr=8-1
Edit: I'll be buying one eventually to test it out. Just ordered one, it will be here Tuesday.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Have fun testin a jig that dont help here. YOUR PHONE IS A DOORSTOP. The link wont help because he didnt flash an international boot image, he flash a whole international rom. look at the script in an international rom vs one of your scripts. The partitioning is ****ked now.
unleashed12 said:
Dude sorry to say but you are done, this has happened to plenty of people on this forum. Your phone is dead (the jig WILL NOT help you, you will need a jtag/warrantee to fix it at this point. Your phone will probably say qusb_dload or something if you try to plug it into your pc, further confirming that fact.
Click to expand...
Click to collapse
Please listen to this guy, only comment here containing any actual sense. QHSUSB_DLOAD=kiss of death

Categories

Resources