I recently purchased this Belkin Bluetooth Music Receiver and set it up in my car.
It works great for the music but when I get a call it just goes back to the phone(no speakerphone even).
What I want is the same thing that happens when headphones without a mic are plugged in during a call.
1. Audio through the "headphones(bluetooth in this case)
2. Mic through the phone mic
Is there any way to set this up?
Thanks
Edit: Additionally it seems that Tasker action *Take Call doesn't work on our device? Even rooted?
Related
in my tp2 i noticed that when i have a wired or bluethooth headset conected and someone calls me it only rings in the headphones! this made me lose several phone calls.
in other devices i had , i used a reg hack for it to ring in the device speaker and headphone,so i tried in my tp2 but it does not work as the reg hack is related to the microsoft bluethooth stack.
therefore i m asking for help and also if other tp2 users can confirm this issue.
my bt heaset is a jabra bt3030.
thanks
I am having the same problem with my TP2, the headset becomes useless for this reason.
I use a Sennheiser MM-200 headset, bought this headset not to have earphones plugged in ears all time but only when i have incoming call.
Not sure what to tell you about the wired headset, but is your BT using the normal headset BT profile or is it connecting also with A2DP/Stero BT? That could be part of the problem.
In the Bluetooth menu it is connected with: "Stereo Audio" and "Hands-free"
you can switch off the stereo audio function and stay with the hans-free function only. it works fine, but you have to do it manually.
wolfgang
I made a soft reset and now the phone rings even with stereo audio enabled - whats good for me, but i do not understand why
Hi Faria,
There is a setting in the BT config to transfer "ALL" system sounds to the connected audio device, this may be your issue. I don't use a wired but my Rhodium rings in the headset and on the device after removing this option.
Cheers,
Beasty
I really hate this feature too. I am used to listening to music on my BT hedset. So when I get home I would just take them off, put the phone on my desk and go about my business. But if I don't disconnect the headset now I won't notice it ringing... which can lose in lost phone calls.
Hopefully someone will find a workaround.
Start>Settings>Connections>Bluetooth
First tab (gears)>Advanced>Audio
"Play system sounds on remote hands-free device" = uncheck
Just tested and works for me.
I get the normal ringtone from the phone and the regular "beep" from the stereo headset.
FYI, this is basically the same information as listed two posts up...
On my old phone if my headset was in and my phone rang it would say call from and state the persons name through my headset. The ringer itself wouldn't play through my headset nor the phone. And now I can't remember but I know it beeps in my ear but I think the phone plays the actual ringer also at the same time. But if I checkmark what you guys are unchecking will the actual ringer play through my plantronics bt headset and not on the phone.. I kind of would like that for if I am out and dont' want my phone to ring all loud I would rather the ringer play in my ear and was wondering if that's what happens when I check that. Mine was unchecked when I got the phone.. I don't havea bt headset I use for music just talking mostly when driving..
so whenever i use my phone in my car, i have it plugged into an auxilary port on my car stereo. problem is that with this phone (never did this on my old phones) whoever i'm talking to can hear them selves echo. i'm pretty sure the problem is the mic volume of the galaxy s3. is there a way to adjust this so that it won't pick up the other persons voice coming thru my car stereo? of course i could always turn down my car stereo (which i haven't actually tested but i'm assuming it would work) but i'd rather just have a permanent fix if possible.
thanks
I am sure this is not specific to the SGS3, but I swear this used to work with my S2.
My 2006 VW doesn't have an AUX input so I use one of the FM Transcievers. It works well.
But...I also use a bluetooth headset while driving.
What I want to happen is to be able to answer calls with my bluetooth headset. Right now while the FM thing is plugged into the headphone jack, the callers voice is sent over the headphone jack and on the stereo. It is as if my bluetooth headset is disabled while the headphone jack is used.
Is there any way to use the headphones to listen to music, but use the bluetooth headset for calls?
BTW, I am using PowerAmp.
Have you tried changing the order in which you connect the 2 devices. Try making sure you connect the transmitter before connecting the bluetooth headset. You may also need to edit the properties of the bluetooth headset and disable a2dp to prevent music from going to the headset. If all else fails, there should be a button during a call that you can use to switch between bluetooth, speakerphone, handset. Not ideal while driving, though.
One thing Android needs is a proper mixer control panel...
tmagritte said:
Have you tried changing the order in which you connect the 2 devices. Try making sure you connect the transmitter before connecting the bluetooth headset. You may also need to edit the properties of the bluetooth headset and disable a2dp to prevent music from going to the headset. If all else fails, there should be a button during a call that you can use to switch between bluetooth, speakerphone, handset. Not ideal while driving, though.
One thing Android needs is a proper mixer control panel...
Click to expand...
Click to collapse
Actually the Headset button is lit up on the in call screen, as if the bluetooth headset is connected for the call. Unfortunately it is still routing through the headset/handset mic.
Hi all,
When i have a Bluetooth headset connected and a call is received, a tone sounds inside the headset AND my regular ringtone plays on the speaker. When I get an email or SMS the appropriate notification sounds play on BOTH the speaker and my headset.
OTOH, when I plug in a wired headset the speakers cut out and all is heard only through the headset.
Is there a way in the settings that I have have the speaker muted for all sounds whenever the BT is connected -- channeling all rings, notications, etc through the headset -- just like when a wired headset is plugged in?
Thanks!
Dear All,
I have a quite big problem, when I want to make a phone call in my car.
I connect the phone's audio out via a minijack to my car's radio and I want to use my phone's built in microphone for phone calls.
Unfortunately the mic does not record my voice loud enough. When I use the phone's built in loudspeaker it works fine, but when I use the car radio as sound output the mic does not record loud enough.
Does anybody know how to solve this issue?
My Samsung Galaxy Note 1 had a car mode available for this.
Thanks!
Simply, the headphone jack also contains the mic connector for a proper phone head/earphone and mic. Plugging your phone into your stereo via this jack disconnects the internal mic in favour of the headset mic which of course you won't have if you connect to the car stereo. So you are effectively disabling the ability to use the phone for calls when plugged in this way.
But the mic is NOT disabled. It is still enabled but is recording the voice as if it is being used like in a normal phone call. All I need is a function to switch the mic to some kind of a handsfree mode.
Sorry for my English.
With "normal phone call" I mean the phone being held right at your ear.
With "handsfree mode" I mean speakerphone mode.
So I need the audio out via stereo jack and I need the voice in via phone microphone in speakerphone mode...
Can you try using a cable that doesn't pass microphone? I think the difference is the full cable WITH mic uses 3 connections and the standard audio only uses 2.
This will prevent the internal microphone from being disabled.
player911 said:
Can you try using a cable that doesn't pass microphone? I think the difference is the full cable WITH mic uses 3 connections and the standard audio only uses 2.
This will prevent the internal microphone from being disabled.
Click to expand...
Click to collapse
I already use a standard audio cable with 2 connections only. The problem is not that the microphone is not working at all but it is not recording loudly enough. I simply want it to record as loudly as it does on speakerphone mode.