ROM update to 2.3.6 (again) - T-Mobile Samsung Galaxy S II SGH-T989

ok so i had another thread where i found out i hard bricked my phone cause i did not use ODIN properly. so this time i am going to ask for settings on ODIN so i can put the 2.3.6 ROM on my phone without hardbricking
i have the rom file already named T989UVKL1_HOME_SGH-T989user_CL799405_REV00.tar.md5
i open up ODIN (1.85). What check boxes do i need? do i need re-partition? F.reset time? flash lock? phone EFS clear? phone bootloader update?
Do i just load the .md5 file into PDA? do i need any other file?
will loading the ROM erase all my data?

Dude to be as nice as possible. There is a sticky section on how to do this. Just check PDA and load it from PDA. Don't touch anything else on Odin.Dont hit repartition. Don't hit anything else. Just load to PDA. And do not rename the file or unplug your phone at any time.if you don't care about root you can always update via kies and foolproof. Please search the threads or post in general. People will blame you for ever if you post in the wrong section. Good luck.
DeathBlimp said:
ok so i had another thread where i found out i hard bricked my phone cause i did not use ODIN properly. so this time i am going to ask for settings on ODIN so i can put the 2.3.6 ROM on my phone without hardbricking
i have the rom file already named T989UVKL1_HOME_SGH-T989user_CL799405_REV00.tar.md5
i open up ODIN (1.85). What check boxes do i need? do i need re-partition? F.reset time? flash lock? phone EFS clear? phone bootloader update?
Do i just load the .md5 file into PDA? do i need any other file?
will loading the ROM erase all my data?
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App

go into download mode. after you are in download mode and connected via usb to computer thru download mode then open up odin. after that just hit pda then find the tar file you downloaded onto computer. once u find file hit that and u are good to go then run it ....let it do its thing don not touch the phone. question tho why dont you just flash one of the 2.3.6 zips we have here? also there is cwm flashable radios here too

it will not erase your data. Its a non wipe update.
Sent from my SGH-T989 using XDA App

chib1panda said:
Dude to be as nice as possible. There is a sticky section on how to do this. Just check PDA and load it from PDA. Don't touch anything else on Odin.Dont hit repartition. Don't hit anything else. Just load to PDA. And do not rename the file or unplug your phone at any time.if you don't care about root you can always update via kies and foolproof. Please search the threads or post in general. People will blame you for ever if you post in the wrong section. Good luck.
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
yea i realized i probably put it on the wrong section! please move it! thx!

OMG! All you have to do is read. If you don't know how to read....There is plenty of tutorial videos on YouTube ...
Sent from my SGH-T989 using xda premium

Dude how is that helpful. You read. He got it.
Hoezack said:
OMG! All you have to do is read. If you don't know how to read....There is plenty of tutorial videos on YouTube ...
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App

Wrong forum.......... .....................
Sent from my SGH-T989 using XDA App

DeathBlimp said:
i have the rom file already named T989UVKL1_HOME_SGH-T989user_CL799405_REV00.tar.md5
Click to expand...
Click to collapse
Is that the whole file or just the md5 of the actual file?

Related

[Q] EC05 tar File

What all needs to be used to flash the EC05 tar file from Mammon in ODIN? What settings need to be checked? Do we need to put in the victory_8G pit file and the EC05 tar file? Any help with this would be great! Thanks in advance!
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
spitefulrain said:
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
Click to expand...
Click to collapse
That's what I thought, confirmation is everything! Thank you very much!
spitefulrain said:
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
Click to expand...
Click to collapse
OK so do this and there will be no data loss (I know, backup always) then flash the new ROM over the old right?
Don't know what is going on in the DEV section. Seems to be a war or something. And Bonsai thread keeps getting closed.
kennyglass123 said:
OK so do this and there will be no data loss (I know, backup always) then flash the new ROM over the old right?
Don't know what is going on in the DEV section. Seems to be a war or something. And Bonsai thread keeps getting closed.
Click to expand...
Click to collapse
Yup, I did a nand backup and flashed the EC05 modem through ODIN and it rebooted back into the VIPERrom 5.0 and everything worked alright. I wiped 3X and installed Bonsai 4.0. Works fine.
jerbeck24 said:
Yup, I did a nand backup and flashed the EC05 modem through ODIN and it rebooted back into the VIPERrom 5.0 and everything worked alright. I wiped 3X and installed Bonsai 4.0. Works fine.
Click to expand...
Click to collapse
Cool. Thanks. I assume I can flash Bonsai 4 right over 3.0.1 since they have been including the wipes in the flash. Can't ask anyone since their thread keeps getting locked.
Sent from my SPH-D700 using XDA App
kennyglass123 said:
Cool. Thanks. I assume I can flash Bonsai 4 right over 3.0.1 since they have been including the wipes in the flash. Can't ask anyone since their thread keeps getting locked.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Where did you get the .pit file?
nixo31 said:
Where did you get the .pit file?
Click to expand...
Click to collapse
Pit file came with the Odin 1.6 download. The tar file came from Bonsai. Thread is closed but links are active.
Sent from my SPH-D700 using XDA App
you dont have to wipe
Well i have the EB13 pit file...can i just use this one? Or is there one specifically for EC05???
Anyone know if there is going to be a .tar file at midnight?? or is the .bin file the same thing???
qbking77 said:
Anyone know if there is going to be a .tar file at midnight?? or is the .bin file the same thing???
Click to expand...
Click to collapse
its already out!
Where can I find the .tar file??
Sent from my SPH-D700 using XDA App
qbking77 said:
Where can I find the .tar file??
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Look in the page before last in Bonsai 4.0.0 thread its closed but the link is up...u will have to sign up to download
Are you using eb13-ext4.pit file or another with the odin?
apatcas said:
Are you using eb13-ext4.pit file or another with the odin?
Click to expand...
Click to collapse
I just used the same EB13-ext4.pit and it was flawless. Only problem was i forgot i had to be in download mode lol
Who hasn't done that? lol
nixo31 said:
Look in the page before last in Bonsai 4.0.0 thread its closed but the link is up...u will have to sign up to download
Click to expand...
Click to collapse
I don't see a link it has been removed.
http://forum.xda-developers.com/showthread.php?t=1001469
or is this the wrong thread
This is removed too http://forum.xda-developers.com/showthread.php?t=976864
Can someone PM me his link please?
I'm thinking of going purely stock for a bit...
Edit: Thanks to both you guys, you know who you are. Don't know if y'all want me to publicly say who lol
spitefulrain said:
The only option checked should be auto reboot. Yes you do need to use the .pit file, and the modem.tar file should go in the phone slot. Good luck. Im using it, its working fine.
Click to expand...
Click to collapse
Thanks, I only wanted the modem for now and never used odin. I always felt odin was a last resort if cwm ever failed to restore a nandroid, still never wanted to use it. Anyhow I still screwed up by putting the tar file under pda instead of phone, but thankfully it didn't matter....as I wipe the sweat beads off my forehead. :-D
If you flash a tar file it goes under PDA. .bin goes in phone. You did it right.
Sent From My Evo Killer!

how do i root gingerbread fc09

all i see is for ef02 but nothing on fc09
:banghead::banghead::banghead::banghead:
Non searching club member number xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Youtube QBking77 Epic 4G, 6th video down.
http://www.youtube.com/watch?v=C9eaCtiS0Bo&feature=youtube_gdata_player
Sent from My Epic Ice Cream Sandwich With Sprinkles!!!
Google how to root the Samsung Epic on FC09 and watch the qbking77 video on youtube. All files needed are linked there.
Sent from my SPH-D700 using xda premium
If your lazy i offer remote rooting services as well as help you through flashing new roms ETC. Thats if your lazy or scared you may brick your phone... cuz there is that potential with this phone.... not trying to scare you just making you aware of some facts.
need a little help with this one
I'm not sure if its just me or not, but the link to the cwm.tar file ends up just a "recovery.bin" (VLC) file after unzip.
You don't "unzip" that. Use that file as-is (in .tar format) with Odin to flash CWM.
View attachment 1272254
nikon120 said:
You don't "unzip" that. Use that file as-is (in .tar format) with Odin to flash CWM.
View attachment 1272254
Click to expand...
Click to collapse
awesome. thanks for the help.
ÜBER™ said:
If your lazy i offer remote rooting services as well as help you through flashing new roms ETC. Thats if your lazy or scared you may brick your phone... cuz there is that potential with this phone.... not trying to scare you just making you aware of some facts.
Click to expand...
Click to collapse
message me please.
brett701 said:
message me please.
Click to expand...
Click to collapse
It's easy to do solo man. Learn about your phone if you want it rooted.
Open odin and uncheck everything on the left.
Put CWM.tar in the PDA slot
Put victory.pit in the PIT slot
Flash
After success, pull battery and disconnect usb cable
Put battery in and 3-finger boot into CWM
Flash whatever rom you put on your SD
nikon120 said:
It's easy to do solo man. Learn about your phone if you want it rooted.
Open odin and uncheck everything on the left.
Put CWM.tar in the PDA slot
Put victory.pit in the PIT slot
Flash
After success, pull battery and disconnect usb cable
Put battery in and 3-finger boot into CWM
Flash whatever rom you put on your SD
Click to expand...
Click to collapse
Leave out step 3... that's for going back to stock, not for rooting....
Sent from my PC36100 using xda app-developers app
flastnoles11 said:
Leave out step 3... that's for going back to stock, not for rooting....
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
I always use the pit file out of habit.

(ODIN)(ICS)(LE1) SGH-T989_TMB_1_20120608172207_ugy1nehf4g

100% factory. Pulled straight from Samsung's servers and decrypted for your flashing pleasure.
http://www.4shared.com/zip/rM9GGS0X/SGH-T989_TMB_1_20120608172207_.html
http://uploading.com/files/4ed8d4md/SGH-T989_TMB_1_20120608172207_ugy1nehf4g.zip/
.zip
CRC32: A3A8BBC9
MD5: B6DD110BD2F6CF6AB6DFC0D834439B65
SHA-1: F4F25A4B14710D944841D1FDBD6B91449526C845
.tar.md5
CRC32: 686A2AF6
MD5: A203B403B26C8790F7080407524FC80A
SHA-1: 08B9F647CA87EA44DC8FCAEFABA5471B420004F6
Unzip and put file into PDA in ODIN and flash away! If you need ODIN, it is attached below.
*WARNING* DO NOT CHECK RE-PARTITION OR ANYTHING ELSE. ONLY AUTO-REBOOT AND F. RESET TIMER SHOULD BE CHECKED.
If you need more information about this file and what it is/what to do with it, read the stickies at the top of this forum to learn more about ODIN and what it is used for. This file is provided mostly for people who like me who prefer to odin a stock rom and tweak it themselves. It will also prove INVALUABLE from here on out for when you need to unroot your phone (send into t-mobile/samsung, just want it un-rooted).
IF YOU WANT ROOT:
I also attached the latest superuser and CWM recovery for those who want to root.
Put the recovery.tar in the pda slot and flash for CWM recovery.
Then install the attached superuser inside CWM recovery to have full root!
FYI: It's a known issue that superuser usually does not "stick" on the first try. This is with ANY ROM for our phones. Just keep flashing it (usually 2 to 3 times)until it says installation complete.
THIS WILL NOT AFFECT YOUR DOWNLOAD/FLASH COUNTER (+)
Will this work in clockworkmod recovery?
Robca79 said:
Will this work in clockworkmod recovery?
Click to expand...
Click to collapse
NO, it clearly says ODIN on top.
Mr. X is making the flashable zip.
Powered by the SGSII
Nope i believe Mr. X is making that as we speak. This is for a full ODIN flash.
rooted?
Can't wait for your link, can I use CWM to flash? Is the firmware already rooted or
factory fresh one?
Wow you guys...just wow...
Sent from my SGH-T989 using xda premium
Will be factory fresh. Will be like any other stock rom, not rooted. Root it via odin like we have always done for all of our roms. I think it's best to just leave completely intact so we always have an option to get our phones back to 100% factory. The CW flashable zips and rooted custom roms are on their way.
You should've seen this coming dude ! Lol
Sent from my iPad using Tapatalk HD
No dummies use Odin to flash through recovery. Only us tt flashable zip packz from tbe man himself. sheesh....when will yall learn
Sent from my SGH-T989 using xda premium
When you post a less than informative OP it's bound to generate questions.
Can the radio be pulled from this update?
Sent from my SGH-T989D using Tapatalk 2
rsfaze said:
When you post a less than informative OP it's bound to generate questions.
Click to expand...
Click to collapse
Lol what's questionable? It says it's for Odin right in the title. And Odin files are ALWAYS 100% stock
Sent from my SGH-T989 using xda premium
rsfaze said:
When you post a less than informative OP it's bound to generate questions.
Click to expand...
Click to collapse
An odin file is just that: an odin file. No offense if you knew what an ODIN file was you wouldn't be asking.
Whenever the upload finishes in 15 minutes or so, i will make a short description to go with it.
Towle said:
Lol what's questionable? It says it's for Odin right in the title. And Odin files are ALWAYS 100% stock
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thank You ! I was just gonna say the same the exact same thing ! Lol
Hi All!
Trying to get an answer, I am on [ROM][ICS 4.0.4]x :ARKSIDE.UCLE2:: x[BETA07.1][6.04.2012] right now, with this fine community getting ready to drop this without having to use Kies, I keep hearing about UVLDE firmware and needing to flash before flashing the new one TMobile just released (ICS). If I am already on ICS do I still need to flash UVLDE? thanks for the guidance O'h wise ones
slice2011 said:
Hi All!
Trying to get an answer, I am on [ROM][ICS 4.0.4]x :ARKSIDE.UCLE2:: x[BETA07.1][6.04.2012] right now, with this fine community getting ready to drop this without having to use Kies, I keep hearing about UVLDE firmware and needing to flash before flashing the new one TMobile just released (ICS). If I am already on ICS do I still need to flash UVLDE? thanks for the guidance O'h wise ones
Click to expand...
Click to collapse
Nope, just wait for someone to post a zip and you can flash it.
Sent from my SGH-T989 using xda premium
defvayne said:
Can the radio be pulled from this update?
Sent from my SGH-T989D using Tapatalk 2
Click to expand...
Click to collapse
Radio is up in general section in ics thread
Sent from my SGH-T989 using XDA
Towle said:
Nope, just wait for someone to post a zip and you can flash it.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Appreciate the prompt response and answer, much appreciated!
So no go on this ODIN one?
slice2011 said:
Appreciate the prompt response and answer, much appreciated!
So no go on this ODIN one?
Click to expand...
Click to collapse
Flash this via Odin only if you want an UN-rooted TMO ics. Wait for zipped ones as they will be rooted.

Need Help asap!!

i just root my phone but not sure what happen, i need to flash a new rom to make my phone work but i dont have a sd card to put the zip file in it, i can't connect to my phone and put the zip file it in and flash it through, i'm on the recovery screen, how do i get my phone to connect to my computer and put the file it in. Need help asap, thank you
You could try getting it into download mode and using Odin to get it back in working order
Sent from my Nexus 7 using xda premium
papi5120 said:
You could try getting it into download mode and using Odin to get it back in working order
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
more detail please too many option on odin
when i power on the phone sound come on for a while and i'm just at a blank scree, seen like i mess, i need a new rom but i dont have a sd card with a zip on file and i can't connect my phone to my computer to transfer that zip file to my phone so i can flash it..what to do..this is a bad feeling
This thread should help asking as u can get into download mode just follow the directions
http://forum.xda-developers.com/showthread.php?p=28740768
Sent from my Nexus 7 using xda premium
papi5120 said:
This thread should help asking as u can get into download mode just follow the directions
http://forum.xda-developers.com/showthread.php?p=28740768
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
how do i flash a zip file rom on download mode?? lost
Do you not have a cable to connect the phone to the computer ?
If not, perhaps you should buy one (they are cheap) before continuing on. I know you can transfer files without one, but it's really invaluable and I wouldn't start messing around in my phone without it in case something like this happened.
Do you have an SD card in the phone now ? Do you have an adapter or something ?
Pennycake said:
Do you not have a cable to connect the phone to the computer ?
If not, perhaps you should buy one (they are cheap) before continuing on. I know you can transfer files without one, but it's really invaluable and I wouldn't start messing around in my phone without it in case something like this happened.
Do you have an SD card in the phone now ? Do you have an adapter or something ?
Click to expand...
Click to collapse
i have no sd card, but i do have a cable to connect the phone to the computer, i just root it and my system is total wipe out and i need to flash a rom into my phone but my phone doesn't connect to my computer and it wont allowed me to put the zip file in, i'm also at the recovery where i press power button plus home button and up volume button
You don't flash zips in odin. Flash the fw .tar.md5 file.
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
You don't flash zips in odin. Flash the fw .tar.md5 file.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
fw. ta. md5 can they flash my phone so i can used it like stock?
Yes. Use Odin to install root66 from docs sticky thread in android development.
brokensmile209 said:
fw. ta. md5 can they flash my phone so i can used it like stock?
Click to expand...
Click to collapse
Yes just follow the directions step-by-step using the root66_TMO_T999UVDLJA.7z file for T-mobile. Do NOT SKIP any steps. Also to note, after you flash, you will be on a completely stock rom but WITH root (rooted).
brokensmile209 said:
fw. ta. md5 can they flash my phone so i can used it like stock?
Click to expand...
Click to collapse
Well, the fw is just short for firmware. Not part of the file name.
Basically you download the version you want, UVDLJA for jb, UVALJ4 is the latest ics.
If you want pure stock, get the regular firmware. If you want root, use the root66 version. (Root66 is identical to stock fw but is pre-rooted).
Flash whichever one you choose and you will be fully stock.
If you go to the firmware thread in my sig you will find all available firmwares, regular and root66 (ignore the ota files).
In post 2 of the thread you will find Odin, Drivers and instructions. Look for the Odin Instructions, not Mobile Odin.
If you alreadyhave kies or drivrrs installed, don't reinstall them unless you're having problems.
Good luck! Ill try to keep popping in to see if you have any more questions.
Sent from my SGH-T999 using xda premium
---------- Post added at 03:46 AM ---------- Previous post was at 03:42 AM ----------
Or use mrRobonsons thread. Whichever is easier.
Some get confused, but use 7zip to extract the root66 firmware.
Tbe file you flash in odin will have the extension: .tar.md5
Sent from my SGH-T999 using xda premium
Moved to Q&A
@OP, make sure that you are reading and listening to what people are telling you. Everyone that posted in this thread has been in the same place as you and has recovered from it. Maybe gove a little bit more info. We all know Panic Mode when we see it, so just try to be clear and concise as you can.

Need pit file. Phone bricked.

So my phone just stopped working after two days of rooting. I decided to un root it and revert it back to stock with Odin. I downloaded the right file for my phone SGH-M919 but when I tried to flash it. I got there is no pit partition. I tried then using kies and that failed. So I googled s4 pit file and got to a thread that had it. But stupid me thinking that i9505 pit file is the same for my phone because Wikipedia said it was the quad core version which the tmobile is. So now i have a new error for flash.
Please help thank you
The stock tar or md5 file from Sammobile.com has the pit mappings in it.
Sent from my SGH-M919 using Tapatalk 2
elesbb said:
The stock tar or md5 file from Sammobile.com has the pit mappings in it.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
So all I would need is that .tar and it would automatically fix the issue? Or do I have to extract the pit and use it another way? I've never had to deal with this myself but some one else is having the same problem and I'm trying to find the answer for the both of us really, I don't want to be blind if this were to happen to myself so I want to find what I need to correct it before it becomes a problem later.
Flash the stock .tar like the man said...
Sent from my SGH-M919 using xda app-developers app
Orical said:
So all I would need is that .tar and it would automatically fix the issue? Or do I have to extract the pit and use it another way? I've never had to deal with this myself but some one else is having the same problem and I'm trying to find the answer for the both of us really, I don't want to be blind if this were to happen to myself so I want to find what I need to correct it before it becomes a problem later.
Click to expand...
Click to collapse
Just use tar file place it in pda not pit section of odin . Click start after reboot you are back to stock.
Sent from my SGH-M919 using Tapatalk 2
richardlibeau said:
Just use tar file place it in pda not pit section of odin . Click start after reboot you are back to stock.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Sounds simple, I've been helping some one from here out a little and either he doesn't understand what he's doing or there's something else wrong that he doesn't know he did in the mean time but that's pretty simple for a fix. He's been "from what I gather" doing that same thing but when it starts it just hangs at the check in Odin. I told him it takes a few minutes before it actually shows progress but he's waited over an hour so maybe he did something to the partitions that's all I can think of that would cause this to happen but it's hard trying to figure out the problem when you don't have the device in hand.
Thanks for responding I'll send him the link to the thread.
Orical said:
Sounds simple, I've been helping some one from here out a little and either he doesn't understand what he's doing or there's something else wrong that he doesn't know he did in the mean time but that's pretty simple for a fix. He's been "from what I gather" doing that same thing but when it starts it just hangs at the check in Odin. I told him it takes a few minutes before it actually shows progress but he's waited over an hour so maybe he did something to the partitions that's all I can think of that would cause this to happen but it's hard trying to figure out the problem when you don't have the device in hand.
Thanks for responding I'll send him the link to the thread.
Click to expand...
Click to collapse
If it's hanging at the "check" in Odin, it's not even began to write things to the device. The "check" part is checking the tar file. So it may have just been an incomplete download of the tar file.
Sent from my SGH-M919 using Tapatalk 2
elesbb said:
If it's hanging at the "check" in Odin, it's not even began to write things to the device. The "check" part is checking the tar file. So it may have just been an incomplete download of the tar file.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
That's what I thought too, it works for me so he must have flashed something he shouldn't have.
Sent from my SGH-M919 using xda premium
Same problem as above but still getting pit error
I have the same problem as the guy above. I tried to unroot and soft bricked my phone. Kies hasnt worked neither has anything I've read. I've tried the stock tar and modified tar file from this post ( http://forum.xda-developers.com/showthread.php?t=2258628) but still havent had much success. The tar check passes so I'm assuming the files are valid and I'm uploading the file in the PDA slot in Odin 3.07. But when the program runs it gets to (check pit mapping) then it says (device removed) then (device addded) then i get a failed message. Anyone have any ideas?
I'm using Galaxy S4 SGH-M919
Win 7 Home 64bit
So many variables, try original Odin 1.85, try a different USB cable and USB port on PC.
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)
Same problem. Nothing is working. I am using the SGH-M919 pit file, but still, Odin throws errors. "Re-partition operation failed"... I tried everything nothing wants to work so far. Any ideas?
Try using an original Samsung USB cable.

Categories

Resources