Best non-GN car mount? - Samsung Galaxy Nexus

I'm looking for one in the vent or maybe some type of dash mount. I don't like the window mounts. It doesn't have to be exclusive for the GN.

xtigerr said:
I'm looking for one in the vent or maybe some type of dash mount. I don't like the window mounts. It doesn't have to be exclusive for the GN.
Click to expand...
Click to collapse
I picked up one of these for mine until my proclip ships: http://www.amazon.com/gp/product/B003XAF4YQ/ref=oh_o05_s00_i00_details
It's decent for what it is, but coming from a proclip it's a few steps down.
I also posted a review and picture up there using it in my Xterra. In the mounts defense I will say that the Xterra's layout doesn't offer much placement flexibility.

I picked up this one, per someone else's comments in this forum.. works pretty well thus far.. I have it mounted to the dash, and I can almost pull my dash apart with it.. really really strong connection and my dash isn't even remotely smooth..

depending on what you want to spend, the BEST most STABLE and secure mounts are made by RAM Mounts. You get any type of connection you want, and the nexus fits perfectly in their universal X grip.
Check them out www.ram-mount.com

RAM all the way!
bpowder1966 said:
depending on what you want to spend, the BEST most STABLE and secure mounts are made by RAM Mounts. You get any type of connection you want, and the nexus fits perfectly in their universal X grip.
Check them out
Click to expand...
Click to collapse
I second bpowder1966's recommendation. The X-grip holds the Nexus really well, and the mounting options are really comprehensive. I'm using a window mount (which is the most secure one I've ever seen), but they have adhesive mounts, mounting plates that fit between interior trim pieces, cupholder thingies, floor mounts...

xtigerr said:
I'm looking for one in the vent or maybe some type of dash mount. I don't like the window mounts. It doesn't have to be exclusive for the GN.
Click to expand...
Click to collapse
happily using this
http://www.bracketron.com/
and its universal both in holder and mount.

Related

Car mount

So it's time to find a car mount for the SGS2.
For the HD2 I used an air vent mount (this). I don't like the windscreen suction mounts (just my preference, even though they tend to be more flexible in terms of positioning the device), and the positioning of the air vent mount is almost perfect in my car. The only thing that is a little annoying is that the fixed one obviously don't allow any turning at all, which can be annoying when it's sunny as I'd prefer to have the screen point more directly at me.
Therefore I'm looking for an air vent mount that has some sort of swivel included - basically something similar to this for, or perhaps something more generic like this or this.
Has anyone used any of these (or the windscreen suction mount equivalents) from either Ultimate Addons or Arkon? How well made and durable are they? How well do they hold their position?
Are there other ones I've missed that I should consider?
Thanks in advance for any input!
I'm looking for the same thing, preferably specific to the S2 (much better to slip it into a custom holder, rather than placing it in a generic one then tighten the grips etc).
Something like this (no link allowed.. see gripmount on mobilefun) on the air vent would be great.
I also like vent holders! I just buy a cheap generic one and modify it to fit my needs.
Obviously this involves taking apart my vent and drilling holes in the phone holder, put you get just the thing you need! Plus its also wayyyy more stable as you use cable ties to get it solidly in place.
The mounts that usually come with the vent holder are flimsy and usually end up falling off!
The gripmount on mobilefun looks great, but I can't see how it manages to fit the SGS2 both with and without a case! I'm using a silicone skin with mine and would rather have something that will work without me having to take it on and off. Is the mount slightly bendy so the phone just clips in? Anyone got any experience of these?
I've decided to just hold fire until the official Samsung mount comes out - it looks pretty good on their website and I can order the desktop dock at the same time.
Breffo multi-fuctional Car-dock/Cradle
I saw this product last year and thought this might be interesting?! My apologies for not yet have those for review, didn't need it yet. But when i have a car this i would definitely buy.
The brand is Breffo and the product is Spiderpodium, there website is www.breffo.com
Interesting idea . . . on fleabay for £13 (item 200603319280)
Might pick one up and see how it works as a vent holder . . .
Edit: The reviews are great, so ordered a black one off ebay. There are white ones for just £8 on Amazon if you're not fussed about colour! Will return and let y'all know how well it works . . .
Spiderpodium looks superb, definitely getting one of those. One of the ebay sellers is only around the corner from me, so I've contacted to ask if I can collect. Will report back once I've got hold of one.
I've made my own:
robbiekhan that looks awesome, good work. How much would you charge to make more had to ask lol
It's simple case (hah!!) of sticking and cutting a few bits together really so i couldn't charge to do such a thing as you'd be much better off doing it lol, plus it's fun, something you've made and it can be a conversation piece
My HTC Desire mount DIY article can be found on LifeHacker, method is exactly the same, just omit anything Desire for Galaxy S II
http://lifehacker.com/5593245/build-a-custom-phone-car-mount-for-under-10
Looks so cool! What case did you use - the one from ebay you mentioned in the other tread?
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Yup same case!
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Click to expand...
Click to collapse
That looks very good actually! Going to buy! If anything it means I don't need to take my phone out of the case
I'm going to pick up a Griffin Windowseat I think, as I need something compatible with other phones too.
I have got one one the magic mounts (aka Dash Genie), but due to the textured back the SGS2 doesn't stick
If you wanted universal vent mount, have a look at this by Herbert Richter. If you however want a device specific, and if you want a small project, than I see that Brodit holder for Samsung Galaxy S II seems to be listed, you can covert this into a vent mount or windscreen suction mount using this adaptor plate.
Nice - thanks. For now I decided to take a punt on the £8 white Spiderpodium for its uniqueness - when it arrives I'll see how well made and durable it is, and if that doesn't work out I think a custom/self-made solution might well be the way to go.
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
Click to expand...
Click to collapse
Looks good and cheap enough!
Mine arrived this morning, check out a quick review and a couple of pics here
Summary: great! Will probably get another one, in fact
robbiekhan said:
I've made my own:
Click to expand...
Click to collapse
Looks very good!
Let's see if I can make one myself
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Click to expand...
Click to collapse
I wonder if this will work if you attatch it to the windshield...
On the left of the SGS2 there are the volume buttons. And the miniholder, is really, ehhhh, mini... So I think the phone will hit the window, or if you place it in the holder in a way the phone does not hit the window the volume buttons will be pressed all the time...

Best Car Dock for LTE Nexus with Case and Extended Battery?

I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
FYI I saw someone mention using the standard Garmin nuvi suction cup mount, with a GN in a case it does seem to fit.
Sent from my Galaxy Nexus using XDA App
i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well
Javillanueva67 said:
i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well
Click to expand...
Click to collapse
This thread is about the verizon nexus. You say you have the european samsung dock with the pogo pins and the verizon phone fits in it?
If so, do the pins line up and work to put in in car mode?
I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk
p.s. I have the extended OEM battery and I also have the generic car dock (no 3 pins) and it fits no problem.
Sent from my Galaxy Nexus using Tapatalk
I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can
ProClip adjustable width mount is what I'd recommend
bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
I ordered the X-grip mount with a medium size arm and the adhesive rubber ball base(I plan on keeping my car until its run into the ground) on January 11th.
Soon after ordering they informed me that the base wasn't in stock but it would ship out in 1-2 weeks. 2 weeks past with no word, then he said it would ship out at the end of the week. Still no shipping
I figured CS people would know not to give unrealistic ETA dates(especially when ram-mount makes the damn things themselves), especially over and over again, stringing the customer along...
rickt said:
I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Let us know when you get it because I read a lot on the thread about the 3-pin that some people got burned by claims of the docks having 3 pin connection when they actually didn't. Keep us updated!
bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
Can it swivel to horizontal mode? Currently, this one seems to be the best.
jcwarren217 said:
I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can
Click to expand...
Click to collapse
I'm really tempted. Both options above are expensive. I was worried that the attachment thing might look like ****, but from the pictures in that thread, it doesn't look too bad. Same question though, can I turn it to landscape for Navigation? Also, how sturdy is the connection? Will it fall off as my car hits a bump or something?
acr89 said:
ProClip adjustable width mount is what I'd recommend
Click to expand...
Click to collapse
+1 to ProClip! They have a mount that can adjust with different cases, and it's very sturdy. The one I have mounts to my vent though (I prefer this anyway since my windshield is so...sloped). They are kinda pricey also, but they don't look too bulky and are specifically made for your car model. I love mine.
Would like to bump this thread to see if anyone else had suggestions for good universal car mounts/docks that will work with a GNEX in a case.
Samcobra said:
I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?
Click to expand...
Click to collapse
try the iBolt pro dock alumina... this car dock works with just about any phone, and especially works great with the galaxy nexus.... this cardock allows you to place it on either the windshield, dashboard, or air vent since extra pins are supplied to place the dock there and theres no need to remove your case from your phone... which is a god send.. it only cost me about $35 on amazon, so i cant argue with the price... i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...
SNNTEC said:
i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...
Click to expand...
Click to collapse
You're past 10 posts, pics please!

[Q] What vehicle mounts for a Epic 4G Touch will work with an Otterbox Defender case?

I am trying to identify either a windshield or vent car mount that will be compatible with the Otterbox Defender case for the D710. Will the Otterbox Defender case work with Samsung's OEM Mount? If not, are there any other mounts available that will work? I'm not sold on the Tetrax mount, though it appears that it would work, and am looking for an alternative.
I found a Cygnett windshield mount at Frys for like $17. It grips the phone really well and ive never had it pop off the windshield yet. Cant post links but its pretty easy to find on their site
I've been using one of the universal adjustable mounts that should fit the 'box without a problem but I'm starting to re-think the windshield mount... I have it mounted close the drivers side A-pillar... and in my car there's an airbag in there. I'm concerned that if that airbag goes off I'm going to have a phone impaled in my face.
Wayno-san said:
I've been using one of the universal adjustable mounts that should fit the 'box without a problem but I'm starting to re-think the windshield mount... I have it mounted close the drivers side A-pillar... and in my car there's an airbag in there. I'm concerned that if that airbag goes off I'm going to have a phone impaled in my face.
Click to expand...
Click to collapse
I never thought of that possibility, probably because my blazer doesn't have one. I can't recall ever seeing a legal disclaimer any of the mounts I've used (probably because they would be in the instructions where no man would ever find them). Or nobody has sued for that yet.
I usually put mine in the center of the windshield but for road trips I like it on the side window. Charging cable is a pain if just running errands. [IDEA]usb port in door panel[/IDEA]
Sent from my SPH-D710 using Tapatalk 2 Beta-2
Wayno-san said:
I've been using one of the universal adjustable mounts that should fit the 'box without a problem but I'm starting to re-think the windshield mount... I have it mounted close the drivers side A-pillar... and in my car there's an airbag in there. I'm concerned that if that airbag goes off I'm going to have a phone impaled in my face.
Click to expand...
Click to collapse
you're right, ur phone will kill you if you have it that way. the one I use says specifically in the directions not to keep in an air bag deploy area. also using a universal one that works well, just sits on the dash and didn't need adhesives. can't charge though without some ugly cords dangling near the radio and controls.
Sent from my SPH-D710 using XDA
mjacked said:
I am trying to identify either a windshield or vent car mount that will be compatible with the Otterbox Defender case for the D710. Will the Otterbox Defender case work with Samsung's OEM Mount? If not, are there any other mounts available that will work? I'm not sold on the Tetrax mount, though it appears that it would work, and am looking for an alternative.
Click to expand...
Click to collapse
Do you buy chance have a cup holder on either side of your steering wheel? If you do i have the best mount ever.
dante32278 said:
you're right, ur phone will kill you if you have it that way. the one I use says specifically in the directions not to keep in an air bag deploy area. also using a universal one that works well, just sits on the dash and didn't need adhesives. can't charge though without some ugly cords dangling near the radio and controls.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I have to find some video to see how that particular airbag deploys... but it is concerning to me. Ideally I'd like to get the phone off of the windshield anyway because it gets a lot of sun load up there. Not an issue in the moderate months but in the summer it can get very toasty on the dash even when the car is in use. i remember my old EVO hitting its thermal limit a couple of times up there if I didn't have the AC on and the vent duct pointing at it.
That CD holder had me interested but it would block access to the radio station buttons in my daily driver.
Console tray
HaiKaiDo said:
Do you buy chance have a cup holder on either side of your steering wheel? If you do i have the best mount ever.
Click to expand...
Click to collapse
In the past I've used the tray behind the shift stick on the center console. A cup holder on the dashboard would be perfect! Only I don't have one on either of my cars...
I went with this from Amazon: iOttie One-Touch Windshield Dashboard Car Mount Holder for iPhone 4S 4 3GS Samsung Galaxy S2 Epic Touch 4G HTC EVO 4G Rhyme DROID RAZR BIONIC INCREDIBLE 2 CHARGE Google Nexus BlackBerry Torch LG Revolution GPS Compact Size 360 degree Rotatable.
I'll report back on how well it works once I get a chance to use it.

Better Car Mount or Holder for LG Nitro HD

After trying several car mount, I almost give up
http://www.amazon.com/Kensington-Qu...BEV4/ref=sr_1_1?ie=UTF8&qid=1332967645&sr=8-1
This is the one I am currently using. However, the lower part of the holder always touches the power down button, which mutes the GPS!
What car mount do you use?
ssoonngg123 said:
After trying several car mount, I almost give up
http://www.amazon.com/Kensington-Qu...BEV4/ref=sr_1_1?ie=UTF8&qid=1332967645&sr=8-1
This is the one I am currently using. However, the lower part of the holder always touches the power down button, which mutes the GPS!
What car mount do you use?
Click to expand...
Click to collapse
Just use a big binder clip. It's super cheap and works better than any holder I've tried from eBay.
http://lifehacker.com/5747897/how-to-build-a-car-mount-for-your-cellphone-from-office-supplies
I use the Samsung Car Dock for the GS2/Infuse 4G. I've removed the little cover for the micro USB port and the Samsung dock works perfectly; charges and keeps my Nitro HD secure.
SolusCado said:
I use the Samsung Car Dock for the GS2/Infuse 4G. I've removed the little cover for the micro USB port and the Samsung dock works perfectly; charges and keeps my Nitro HD secure.
Click to expand...
Click to collapse
Thanks for the hint! I am going to get one.
LG phone with Samsung Dock
996gt2 said:
Just use a big binder clip. It's super cheap and works better than any holder I've tried from eBay.
http://lifehacker.com/5747897/how-to-build-a-car-mount-for-your-cellphone-from-office-supplies
Click to expand...
Click to collapse
Is our Nitro HD too heavy to be hold by the "thin" holder?
ssoonngg123 said:
Is our Nitro HD too heavy to be hold by the "thin" holder?
Click to expand...
Click to collapse
Nope, my Nitro HD + TPU case works fine with a 2" binder clip in a Honda Accord. I've used it as a GPS on 4 hour drives and it was much more stable than a windshield-mounted holder with a flexible arm.
ssoonngg123 said:
Thanks for the hint! I am going to get one.
LG phone with Samsung Dock
Click to expand...
Click to collapse
I know; who'd have thought?
This isnt the exact same one i purchased, but it looks extremely similar to it. The padded arms that hold the sides or the top and bottom (you can rotate it while its mounted) are individually adjustable so its easy to position them out of the way of buttons while leaving the buttons fully accessible, and the phone secured perfectly.
It comes with two attachments, one allows you to hook it to your heater vents and the other is the window mount.
The window mount is not very long, but very sturdy! This is what i currently use in my car. The vent mount is very nice and sturdy, but it seems its meant to permanently attach to the vents. I first tried to use it since it keeps it out of my window area, but because of the way my vents are setup in my car, it pointed the phone in a bad direction and there's no left-right adjustments that you can do other than the normal movement from the room available from the clips, so upon trying to correct it, the two mounting clips broke and its no longer usable.
Either way, it works out perfect! But again, the one listed is only close to the one i purchased. I picked that one to list though because its from radio shack, where i purchased mine. I went out to the car and there's not a single branding label on it anywhere! crazy..
http://www.radioshack.com/product/index.jsp?productId=3386930#
996gt2 said:
Just use a big binder clip. It's super cheap and works better than any holder I've tried from eBay.
http://lifehacker.com/5747897/how-to-build-a-car-mount-for-your-cellphone-from-office-supplies
Click to expand...
Click to collapse
That's just ghetto...Ghetto FABULOUS!!
Just so happens the big binders and strong rubber bands are items available at my work supply closet! The only thing better than a DIY project is a DIY project with parts you can get for free!
996gt2 said:
Nope, my Nitro HD + TPU case works fine with a 2" binder clip in a Honda Accord. I've used it as a GPS on 4 hour drives and it was much more stable than a windshield-mounted holder with a flexible arm.
Click to expand...
Click to collapse
Namuna said:
That's just ghetto...Ghetto FABULOUS!!
Just so happens the big binders and strong rubber bands are items available at my work supply closet! The only thing better than a DIY project is a DIY project with parts you can get for free!
Click to expand...
Click to collapse
Namuna, have u or anybody else here tried the modified binder clip? I'm currently trying to make one, but I realize that the "arms" seem to be a bit too short to hold it in place. Either it will slip of the top arm or the bottom one every now and then. I've curved them slightly more upwards to give it more of a hold, but it doesn't seem to wanna hold. I wonder if we replace the body of the binder clip with a smaller one and just use the longer arms whether it will work better?
996gt2, would you mind posting a pic or two to show how it looks with yours? Mine just seems to barely hold it, and constantly slips off the arms.
I've found that the Garmin Nuvi 200 mounts like this http://www.ebay.com/itm/Car-Windscr...ers_Mounts&hash=item3a6b7428f1#ht_1996wt_1163 work great with no modification with my body glove dimensions case on, easy to slip the phone in and out of it.
I've also used this same mount on my previous phones with slight modifications (Motorola Photon 4g and Samsung Captivate) which involves using a lighter to melt the sides to the right size.
Also this one looks like it would do the trick http://www.ebay.com/itm/GENUINE-ORI...ers_Mounts&hash=item1c2690c51d#ht_11995wt_905
0mfgroflmao said:
I've found that the Garmin Nuvi 200 mounts like this http://www.ebay.com/itm/Car-Windscr...ers_Mounts&hash=item3a6b7428f1#ht_1996wt_1163 work great with no modification with my body glove dimensions case on, easy to slip the phone in and out of it.
I've also used this same mount on my previous phones with slight modifications (Motorola Photon 4g and Samsung Captivate) which involves using a lighter to melt the sides to the right size.
Also this one looks like it would do the trick http://www.ebay.com/itm/GENUINE-ORI...ers_Mounts&hash=item1c2690c51d#ht_11995wt_905
Click to expand...
Click to collapse
So r u currently using that very Garmin nuvi mount? And it holds the phone nicely and stably? I find that sometimes these mounts lean sideways when I have both power n 3.5mm jack plugged in. If u r using the mount pls take a pic of the phone in the mount so I can see how well it holds it. For that price, if it works well, I'd rather go with that. I'm spending way more already with the DIY mount clip lol.
Sent from my LG-P930 using xda app-developers app

Pro clips for HTC ONE

So I have a pro clip (http://www.proclipusa.com/) and have been using it for a few years now (since my iPhone 3GS) and every time I swap out the Holder for my new phone (obviously).
I really like their style because it's pretty minimalist and doesn't involve suction cups. HOWEVER, the latest one I have been using for my iphone 4s (with bumper) was less than stellar (This: http://www.proclipusa.com/?sectionp...r=false&have_mount=true&p_pageid=16488&dtype= )
They started using a 'one size fits all' type of product where you basically size your devise and screw in the adjustable sides. The sides ALWAYS slip and I have to re-tighten them. It's really a pain.
It also appears that they don't have support YET for the HTC One (another bummer).
I want to keep Vehicle mount and I am wondering if there is a way to hybridize the custom vehicle mount with something like this: http://www.amazon.com/GreatShield-Windshield-Dashboard-Universal-Holster/dp/B0090SB1CE/
Again, trying to stay away from the window suction cups which seems nearly unavoidable.
Anyone find a good solution to the proclips problem? Really unfortunate that they chose to skimp on quality and haven't updated for the ONE...
I've been checking the proclip website for an HTC One mount as well. As you said, no such luck so far.
One possible (but not very elegant) solution involves the HTC One official car dock (D160 or whatever the model number is). HTC dock uses a suction cup and comes with a flat plastic disc with a sticky pad on one side. The normal use for that disc is to stick it on your dashboard to create the flat and glossy surface ideal for the suction cup at the bottom of the actual dock. It should be possible to stick this disc to the proclip vehicle mount and suction-mount the official HTC car dock on top of it.
As I said, not very elegant, but it is one way to convert your proclip vehicle mount to a suction mount point. And you can probably go back to a proclip device docks by removing the sticky disk in the future.
ardabey said:
I've been checking the proclip website for an HTC One mount as well. As you said, no such luck so far.
One possible (but not very elegant) solution involves the HTC One official car dock (D160 or whatever the model number is). HTC dock uses a suction cup and comes with a flat plastic disc with a sticky pad on one side. The normal use for that disc is to stick it on your dashboard to create the flat and glossy surface ideal for the suction cup at the bottom of the actual dock. It should be possible to stick this disc to the proclip vehicle mount and suction-mount the official HTC car dock on top of it.
As I said, not very elegant, but it is one way to convert your proclip vehicle mount to a suction mount point. And you can probably go back to a proclip device docks by removing the sticky disk in the future.
Click to expand...
Click to collapse
Hmm, that may be something to look into. At least for the time being until ProClip comes out with something...
Wonder how long it takes for them to announce a new device mount...
Grumpy Bob said:
Hmm, that may be something to look into. At least for the time being until ProClip comes out with something...
Wonder how long it takes for them to announce a new device mount...
Click to expand...
Click to collapse
Personally I haven't been too impressed with ProClip in the last few years. The holder they had for the Galaxy S3 was really expensive. Too expensive for what it was...
I'm happy that we have an official car dock from HTC.
The ProClip holders for the HTC One are in production. Within 1-2 weeks they will have them in stock. Just send them an email to get on the notification list. [email protected]
Attached is an image of their HTC One holder with a USB/Car charger. The other standard ones they will have as well.
Proclip sells a suction cup disc: http://www.proclipusa.com/brodit-de.../suction-cup-dashboard-disc-710643-14367.aspx
I'm not sure if it just uses two-sided tape to attach or if there are screw holes so you can attach it properly. Unfortunately the link for the install instructions is broken so I can't really tell.
EDIT: Just sent an email to Proclip to see if it uses adhesive or a screw.
EDIT 2: Got a response, there is adhesive on the back so it's no better than any other disc out there.

Categories

Resources